Wire Bow In Situ Measurement for Monitoring the Evolution of Sawing Capability of Diamond Wire Saw during Slicing Sapphire

Electroplated diamond wire sawing is widely used as a processing method to cut hard and brittle difficult-to-machine materials. Currently, obtaining the sawing capability of diamond wire saw through the wire bow is still difficult. In this paper, a method for calculating the sawing capability of diamond wire saw in real-time based on the wire bow is proposed. The influence of the renewed length per round trip, crystal orientation of sapphire, wire speed, and feed rate on the wire sawing capability has been revealed via slicing experiments. The results indicate that renewing the diamond wire saw, and reducing the wire speed and feed rate can delay the reduction in sawing capability. Furthermore, controlling the value of renewed length per round trip can make the diamond wire saw enter a stable cutting state, in which the capability of the wire saw no longer decreases. The sawing capability of diamond wire saw cutting in the A-plane of the sapphire is smaller than that of the C-plane, and a suitable feed rate or wire speed within the range of sawing parameters studied in this study can avoid a rapid decrease in the sawing capability of the wire saw during the cutting process. The knowledge obtained in this study provides a theoretical basis for monitoring the performance of the wire saw, and guidance for the wire cutting process in semiconductor manufacturing. In the future, it may even be possible to provide real-time performance parameters of diamond wire saw for the digital twin model of wire sawing.

Characterization and evaluation of cytotoxic and antimicrobial activities of cyclotides from Viola japonica

Cyclotides are a type of defense peptide most commonly found in the Violaceae family of plants, exhibiting various biological activities. In this study, we focused on the Viola japonica as our research subject and conducted transcriptome sequencing and analysis using high-throughput transcriptomics techniques. During this process, we identified 61 cyclotides, among which 25 were previously documented, while the remaining 36 were designated as vija 1 to vija 36. Mass spectrometry detection showed that 21 putative cyclotides were found in the extract of V. japonica. Through isolation, purification and tandem mass spectrometry, we characterized and investigated the activities of five cyclotides. Our results demonstrated inhibitory effects of these cyclotides on the growth of Acinetobacter baumannii and Bacillus subtilis, with minimum inhibitory concentrations (MICs) of 4.2 μM and 2.1 μM, respectively. Furthermore, time killing kinetic assays revealed that cyclotides at concentration of 4 MICs achieved completely bactericidal effects within 2 h. Additionally, fluorescence staining experiments confirmed that cyclotides disrupt microbial membranes. Moreover, cytotoxicity studies showed that cyclotides possess cytotoxic effects, with IC50 values ranging from 0.1 to 3.5 μM. In summary, the discovery of new cyclotide sequences enhances our understanding of peptide diversity and the exploration of their activity lays the foundation for a deeper investigation into the mechanisms of action of cyclotides.

Dopant-Free Pyrene-Based Hole Transporting Material Enables Efficient and Stable Perovskite Solar Cells

Dopant-free hole transporting materials (HTMs) is significant to the stability of perovskite solar cells (PSCs). Here, we developed a novel star-shape arylamine HTM, termed Py-DB, with a pyrene core and carbon-carbon double bonds as the bridge units. Compared to the reference HTM (termed Py-C), the extension of the planar conjugation backbone endows Py-DB with typical intermolecular π-π stacking interactions and excellent solubility, resulting in improved hole mobility and film morphology. In addition, the lower HOMO energy level of the Py-DB HTM provides efficient hole extraction with reduced energy loss at the perovskite/HTM interface. Consequently, an impressive power conversion efficiency (PCE) of 24.33 % was achieved for dopant-free Py-DB-based PSCs, which is the highest PCE for dopant-free small molecular HTMs in n-i-p configured PSCs. The dopant-free Py-DB-based device also exhibits improved long-term stability, retaining over 90 % of its initial efficiency after 1000 h exposure to 25 % humidity at 60 °C. These findings provide valuable insights and approaches for the further development of dopant-free HTMs for efficient and reliable PSCs.

Anti-Solvent-Free Preparation for Efficient and Photostable Pure-Iodide Wide-Bandgap Perovskite Solar Cells

The perovskite/silicon tandem solar cell (TSC) has attracted tremendous attention due to its potential to breakthrough the theoretical efficiency set for single-junction solar cells. However, the perovskite solar cell (PSC) designed as its top component cell suffers from severe photo-induced halide segregation owing to its mixed-halide strategy for achieving desirable wide-bandgap (1.68 eV). Developing pure-iodide wide-bandgap perovskites is a promising route to fabricate photostable perovskite/silicon TSCs. Here, we report efficient and photostable pure-iodide wide-bandgap PSCs made from an anti-solvent-free (ASF) technique. The ASF process is achieved by mixing two precursor solutions, both of which are capable of depositing corresponding perovskite films without involving anti-solvent. The mixed solution finally forms Cs0.3DMA0.2MA0.5PbI3 perovskite film with a bandgap of 1.68 eV. Furthermore, methylammonium chloride additive is applied to enhance the crystallinity and reduce the trap density of perovskite films. As a result, the pure-iodide wide-bandgap PSC delivers efficiency as high as 21.30 % with excellent photostability, the highest for this type of solar cells. The ASF method significantly improves the device reproducibility as compared with devices made from other anti-solvent methods. Our findings provide a novel recipe to prepare efficient and photostable wide-bandgap PSCs.

Interfacial Electronic Interaction in Amorphous-Crystalline CeOx -Sn Heterostructures for Optimizing CO2 to Formate Conversion

Formate, a crucial chemical raw material, holds significant promise for industrial applications in the context of CO2 electroreduction reaction (CO2 RR). Despite its potential, challenges, such as poor selectivity and low formation rate at high current densities persist, primarily due to the competing hydrogen evolution reaction (HER) and high energy barriers associated with *OCHO intermediate generation. Herein, one-step chemical co-reduction strategy is employed to construct an amorphous-crystalline CeOx -Sn heterostructure, demonstrating remarkable catalytic performance in converting CO2 to formate. The optimized CeOx -Sn heterostructures reach a current density of 265.1 mA cm-2 and a formate Faraday efficiency of 95% at -1.07 V versus RHE. Especially, CeOx -Sn achieves a formate current density of 444.4 mA cm-2 and a formate production rate of 9211.8 µmol h-1  cm-2 at -1.67 V versus RHE, surpassing most previously reported materials. Experimental results, coupled with （density functional theory）DFT calculations confirm that robust interface interaction between CeOx and Sn active center induces electron transfer from crystalline Sn site to amorphous CeOx , some Ce4+ of CeOx get electrons and convert to unsaturated Ce3+ , optimizing the electronic structure of active Sn. This amorphous-crystalline heterostructure promotes electron transfer during CO2 RR, reducing the energy barrier formed by *OCHO intermediates, and thus achieving efficient reduction of CO2 to formate.

Prism[2]dihydrophenazines: Synthesis, Configurational Analysis, and Supramolecular Tessellation through Exo-Wall Interactions

Macrocyclic arenes have gained considerable attention for their structural diversity and widespread applications. In this research, a new kind of macrocyclic arenes, namely prism[2]dihydrophenazines (anti-P2P20, syn-P2P20, and P2P22), composed of two dihydrophenazine derivatives subunits bridged by methylene groups, were conveniently synthesized by AlCl3 -catalyzed one-pot condensation in 1,2-dichloroethane. Both anti-P2P20 and its isomer syn-P2P20 exhibited flexible and convertible conformation with narrow cavity, while P2P22 possessed rigid and rhombic-like skeleton due to the more steric hindrance on subunits. In addition, the selection of electron-deficient guest was found to influence the outside binding behavior of syn-P2P20. Fantastic regular supramolecular tessellation was fabricated by tiling of syn-P2P20 with tetrafluoro-1,4-benzoquinone (TFB) through the exo-wall interactions. Using 1,5-difluoro-2,4-dinitrobenzene (DFN) as a linker, only the regular 2D network superstructure with periodic units in a plane was obtained through cocrystallization. This work not only reports the construction of supramolecular tessellations by using prism[2]dihydrophenazines as building blocks, but also provides a new perspective for the design of macrocyclic arenes and fabrication of 2D supramolecular materials.

Evaluation of behavioral variance/covariance explained by the neuroimaging data through a pattern-based regression

Neuroimaging data have been widely used to understand the neural bases of human behaviors. However, most studies were either based on a few predefined regions of interest or only able to reveal limited vital regions, hence not providing an overarching description of the relationship between neuroimaging and behaviors. Here, we proposed a voxel-based pattern regression that not only could investigate the overall brain-associated variance (BAV) for a given behavioral measure but could also evaluate the shared neural bases between different behaviors across multiple neuroimaging data. The proposed method demonstrated consistently high reliability and accuracy through comprehensive simulations. We further implemented this approach on real data of adolescents (IMAGEN project, n = 2089) and adults (HCP project, n = 808) to investigate brain-based variances of multiple behavioral measures, for instance, cognitive behaviors, substance use, and psychiatric disorders. Notably, intelligence-related scores showed similar high BAVs with the gray matter volume across both datasets. Further, our approach allows us to reveal the latent brain-based correlation across multiple behavioral measures, which are challenging to obtain otherwise. For instance, we observed a shared brain architecture underlying depression and externalizing problems in adolescents, while the symptom comorbidity may only emerge later in adults. Overall, our approach will provide an important statistical tool for understanding human behaviors using neuroimaging data.

Response of Carbon-Fixing Bacteria to Patchy Degradation of the Alpine Meadow in the Source Zone of the Yellow River, West China

This study aims to enlighten our understanding of the distribution of soil carbon-fixing bacteria (cbbL-harboring bacteria) and their community diversity in differently degraded patches at three altitudes. MiSeq high-throughput sequencing technology was used to analyze the soil carbon-fixing bacteria community diversity of degraded patches and healthy meadow at three altitudes. Redundancy analysis (RDA) and structural equation model (SEM) were used to analyze the correlation and influence path between environmental factors and carbon-fixing bacteria. The results showed that degradation reduced the relative abundance of Proteobacteria from 99.67% to 95.57%. Sulfurifustis, Cupriavidus, and Alkalispirillum were the dominant genera at the three altitudes. Hydrogenophaga and Ectothiorhodospira changed significantly with altitude. RDA results confirmed that available phosphorus (AP) was strongly and positively correlated with Proteobacteria. AP and total nitrogen (TN) were strongly and positively correlated with Hydrogenophaga. Grass coverage and sedge aboveground biomass were strongly and positively correlated with Sulfurifustis and Ectothiorhodospira, respectively. Elevation adversely affected the relative abundance of dominant carbon-fixing bacteria and diversity index by reducing the coverage of grass and soil volumetric moisture content (SVMC) indirectly, and also had a direct positive impact on the Chao1 index (path coefficient = 0.800). Therefore, increasing the content of nitrogen, phosphorus and SVMC and vegetation coverage, especially sedge and grass, will be conducive to the recovery of the diversity of soil carbon-fixing bacteria and improve the soil autotrophic microbial carbon sequestration potential in degraded meadows, especially in high-altitude areas.

Enhancing Stability and Efficiency of Inverted Inorganic Perovskite Solar Cells with In-Situ Interfacial Cross-Linked Modifier

Inverted inorganic perovskite solar cells (PSCs) is potential as the top cells in tandem configurations, owing to the ideal bandgap, good thermal and light stability of inorganic perovskites. However, challenges such as mismatch of energy levels between charge transport layer and perovskite, significant non-radiative recombination caused by surface defects, and poor water stability have led to the urgent need for further improvement in the performance of inverted inorganic PSCs. Herein, the fabrication of efficient and stable CsPbI3-x Brx PSCs through surface treatment of (3-mercaptopropyl) trimethoxysilane (MPTS), is reported. The silane groups in MPTS can in situ crosslink in the presence of moisture to build a 3-dimensional (3D) network by Si-O-Si bonds, which forms a hydrophobic layer on perovskite surface to inhibit water invasion. Additionally, -SH can strongly interact with the undercoordinated Pb2+ at the perovskite surface, effectively minimizing interfacial charge recombination. Consequently, the efficiency of the inverted inorganic PSCs improves dramatically from 19.0% to 21.0% under 100 mW cm-2 illumination with MPTS treatment. Remarkably, perovskite films with crosslinked MPTS exhibit superior stability when soaking in water. The optimized PSC maintains 91% of its initial efficiency after aging 1000 h in ambient atmosphere, and 86% in 800 h of operational stability testing.

TIM22 and TIM29 inhibit HBV replication by up-regulating SRSF1 expression

Hepatitis B virus (HBV) infection is a serious global health problem. After the viruses infect the human body, the host can respond to the virus infection by coordinating various cellular responses, in which mitochondria play an important role. Evidence has shown that mitochondrial proteins are involved in host antiviral responses. In this study, we found that the overexpression of TIM22 and TIM29, the members of the inner membrane translocase TIM22 complex, significantly reduced the level of intracellular HBV DNA and RNA and secreted HBV surface antigens and E antigen. The effects of TIM22 and TIM29 on HBV replication and transcription is attributed to the reduction of core promoter activity mediated by the increased expression of SRSF1 which acts as a suppressor of HBV replication. This study provides new evidence for the critical role of mitochondria in the resistance of HBV infection and new targets for the development of treatment against HBV infection.

The History and Prediction of Prebiotics and Postbiotics: A Patent Analysis

Prebiotics and postbiotics have gained attention as functional food additives due to their substantial influence on the gut microbiome and potential implications for human health on a broader scale. In addition, the number of patents for these additives has also increased, yet their functional classification has been problematic. In this study, we classified 2215 patents granted from 2001 to 2020 by functionality to enable predictions of future development directions. These patents encompassed subjects as diverse as feed supplementation, regulation of intestinal homeostasis, prevention of gastrointestinal ailments, targeted drug administration and augmentation of drug potency. The progression of patents issued during this time frame could be divided into three phases: occasional accounts prior to 2001, a period from 2001 to 2013 during which an average of 42 patents were issued annually, followed by a surge exceeding 140 patents annually after 2013. The latter increase has indicated that pre- and post-biotics have been recognized as biologically relevant. Patent mining therefore can enable forecasts of the future trajectory of these biologics and provide insights to evaluate their advancement. Moreover, this research is the first attempt to generalize and predict the directions of prebiotics and postbiotics using patent information and offers a comprehensive perspective for the potential utilization of prebiotics and postbiotics across a wide variety of fields.

The Internal Anatomy and Water Current System of Cambrian Archaeocyaths of South China

Archaeocyaths are a group of extinct filter feeders that flourished in the early Cambrian period and occupied an important position in the evolution of basal fauna and the early marine ecosystem. However, the detailed morphological and anatomical information of this group are still unclear due to insufficient fossil material and limited experimental analyses. Here, we report exquisitely preserved phosphatized archaeocyathan fossil cups, ca. 515 million years old, from the top of the Shuijingtuo Formation (Series 2, Stage 3) and the Xiannüdong Formation (Series 2, Stage 3) of the Yangtze Platform, South China. Detailed observation of their external morphology via scanning electron microscopy (SEM) and micro-computed tomography (Micro-CT) analysis revealed detailed information of their internal structure. They have a typical double-walled cup, with the perforated inner and outer walls concentrically distributed, but the structure between the two walls differs. The inverted cone-shaped cups have radially distributed septa between the walls. Perforated septa connect the two walls. The low and columnar cups have canals between the two walls, forming the network. These pores and cavities constitute an important component of the water current system (pumping and filtering water with a network of canals and chambers) and influence the process of filtration in the cup. In comparison to traditional thin-section analysis, the combination of SEM and Micro-CT analysis on phosphatized archaeocyaths presented in this study further explored the detailed internal structure and finely reconstructed the microscopic overall morphology and anatomy, which provide important information to help us understand the systematic taxonomy, anatomy, and morphology of archaeocyaths during the Cambrian period.

Exploring the Influences of BaO Amount on the Wettability and Mechanical Behavior of Vitrified Bond Diamond Composites

In recent years, the vitrified bond diamond grinding wheel has been applied widely in automotive, aerospace and machine tools of manufacturing industries. However, the main problems of low intensity and poor wettability between the vitrified bond and diamond abrasive limit its further application. In this study, BaO was added into the basic SiO2-B2O3-Al2O3-R2O vitrified bond system, and the impact of BaO on the wettability, thermal and mechanical behavior of vitrified bond and vitrified bond diamond composites was systematically discussed, respectively. The test indicated that when the vitrified bond containing BaO of 6 wt.% was sintered with diamond abrasive at 750 °C, a continuous barium feldspar phase transition layer between diamond abrasive and the bond was generated, which ameliorated the wet property of the bond-diamond abrasive. The contact angle varied from 59° on the blank sample to 35°, and the expansion coefficient changed from 6.24 × 10-6/K to 5.30 × 10-6/K. The Rockwell hardness and flexural strength of the vitrified bond diamond composites achieved the peaks of 117.5 MPa and 113.6 MPa, respectively, which increased by 20.2% and 16.5% compared with that of sample without the addition of BaO.

pH-Responsive Protein Conformation Transistor

Analogous to electronic transistors, transistor-like responsive materials undergo sharp structural transitions in response to a very narrow range of microenvironment signals. This kind of material is typically limited to synthetic polymer-derived nanoscale assembly or disassembly and has profound implications for modern high-tech applications. Herein, we evolve this system from synthetic polymers to biopolymers and extend the corresponding assembly scale from the nanoscale to meso/macro-scale. We develop unique protein nanocrystals with core-shell structures through a two-step nucleation process. The protein nanocrystals exhibit exceptional transistor-like pH-responsive mesoscale assembly through the formation of inter-particle β-sheet linkers. This allows ultrasensitive cross-linking behavior, such as self-coacervation at a water/water interface, ultrafast gelation in seconds, and ultrasensitive swelling for detection of basic vapors at extremely low concentrations. This breakthrough has great promise for broader applications such as drug encapsulation and delivery, biosensing, cytomimetic materials, and microfluidic chemistry.

Tuftelin1 drives experimental pulmonary fibrosis progression by facilitating stress fiber assembly

BACKGROUND

Idiopathic pulmonary fibrosis (IPF) is a progressive interstitial lung disease (ILD) with unknown etiology, characterized by sustained damage repair of epithelial cells and abnormal activation of fibroblasts, the underlying mechanism of the disease remains elusive.

METHODS

To evaluate the role of Tuftelin1 (TUFT1) in IPF and elucidate its molecular mechanism. We investigated the level of TUFT1 in the IPF and bleomycin-induced mouse models and explored the influence of TUFT1 deficiency on pulmonary fibrosis. Additionally, we explored the effect of TUFT1 on the cytoskeleton and illustrated the relationship between stress fiber and pulmonary fibrosis.

RESULTS

Our results demonstrated a significant upregulation of TUFT1 in IPF and the bleomycin (BLM)-induced fibrosis model. Disruption of TUFT1 exerted inhibitory effects on pulmonary fibrosis in both in vivo and in vitro. TUFT1 facilitated the assembly of microfilaments in A549 and MRC-5 cells, with a pronounced association between TUFT1 and Neuronal Wiskott-Aldrich syndrome protein (N-WASP) observed during microfilament formation. TUFT1 can promote the phosphorylation of tyrosine residue 256 (Y256) of the N-WASP (pY256N-WASP). Furthermore, TUFT1 promoted transforming growth factor-β1 (TGF-β1) induced fibroblast activation by increasing nuclear translocation of pY256N-WASP in fibroblasts, while wiskostatin (Wis), an N-WASP inhibitor, suppressed these processes.

CONCLUSIONS

Our findings suggested that TUFT1 plays a critical role in pulmonary fibrosis via its influence on stress fiber, and blockade of TUFT1 effectively reduces pro-fibrotic phenotypes. Pharmacological targeting of the TUFT1-N-WASP axis may represent a promising therapeutic approach for pulmonary fibrosis.

Advances in terahertz metasurface graphene for biosensing and application

Based on the extraordinary electromagnetic properties of terahertz waves, such as broadband, low energy, high permeability, and biometric fingerprint spectra, terahertz sensors show great application prospects in the biochemical field. However, the sensitivity of terahertz sensing technology is increasingly required by modern sensing demands. With the development of terahertz technology and functional materials, graphene-based terahertz metasurface sensors with the advantages of high sensitivity, fingerprint identification, nondestructive and anti-interference are gradually gaining attention. In addition to providing ideas for terahertz biosensors, these devices have attracted in-depth research and development by scientists. An overview of graphene-based terahertz metasurfaces and their applications in the detection of biochemical molecules is presented. This includes sensor mechanism research, graphene metasurface index evaluation, protein and nucleic acid sensors, and other chemical molecule sensing. A comparative analysis of graphene, nanomaterials, silicon, and metals to develop material-integrated metasurfaces. Furthermore, a brief summary of the main performance results of this class of devices is presented, along with suggestions for improvements to the existing shortcoming.

Core gut microbes Cloacibacterium and Aeromonas associated with different gastropod species could be persistently transmitted across multiple generations

BACKGROUND

Studies on the gut microbiota of animals have largely focused on vertebrates. The transmission modes of commensal intestinal bacteria in mammals have been well studied. However, in gastropods, the relationship between gut microbiota and hosts is still poorly understood. To gain a better understanding of the composition of gut microbes and their transmission routes in gastropods, a large-scale and long-term experiment on the dynamics and transmission modes of gut microbiota was conducted on freshwater snails.

RESULTS

We analyzed 244 microbial samples from the digestive tracts of freshwater gastropods and identified Proteobacteria and Bacteroidetes as dominant gut microbes. Aeromonas, Cloacibacterium, and Cetobacterium were identified as core microbes in the guts, accounting for over 50% of the total sequences. Furthermore, both core bacteria Aeromonas and Cloacibacterium, were shared among 7 gastropod species and played an important role in determining the gut microbial community types of both wild and cultured gastropods. Analysis of the gut microbiota at the population level, including wild gastropods and their offspring, indicated that a proportion of gut microbes could be consistently vertically transmitted inheritance, while the majority of the gut microbes resulted from horizontal transmission. Comparing cultured snails to their wild counterparts, we observed an increasing trend in the proportion of shared microbes and a decreasing trend in the number of unique microbes among wild gastropods and their offspring reared in a cultured environment. Core gut microbes, Aeromonas and Cloacibacterium, remained persistent and dispersed from wild snails to their offspring across multiple generations. Interestingly, under cultured environments, the gut microbiota in wild gastropods could only be maintained for up to 2 generations before converging with that of cultured snails. The difference observed in gut bacterial metabolism functions was associated with this transition. Our study also demonstrated that the gut microbial compositions in gastropods are influenced by developmental stages and revealed the presence of Aeromonas and Cloacibacterium throughout the life cycle in gastropods. Based on the dynamics of core gut microbes, it may be possible to predict the health status of gastropods during their adaptation to new environments. Additionally, gut microbial metabolic functions were found to be associated with the adaptive evolution of gastropods from wild to cultured environments.

CONCLUSIONS

Our findings provide novel insights into the dynamic processes of gut microbiota colonization in gastropod mollusks and unveil the modes of microbial transmission within their guts. Video Abstract.

Gut microbiota in parasite-transmitting gastropods

BACKGROUND

Gastropoda, the largest class within the phylum Mollusca, houses diverse gut microbiota, and some gastropods serve as intermediate hosts for parasites. Studies have revealed that gut bacteria in gastropods are associated with various biological aspects, such as growth, immunity and host-parasite interactions. Here, we summarize our current knowledge of gastropod gut microbiomes and highlight future research priorities and perspectives.

METHODS

A literature search was undertaken using PubMed, Web of Science and CNKI for the articles on the gut microbiota of gastropods until December 31, 2022. We retrieved a total of 166 articles and identified 73 eligible articles for inclusion in this review based on the inclusion and exclusion criteria.

RESULTS

Our analysis encompassed freshwater, seawater and land snails, with a specific focus on parasite-transmitting gastropods. We found that most studies on gastropod gut microbiota have primarily utilized 16S rRNA gene sequencing to analyze microbial composition, rather than employing metagenomic, metatranscriptomic, or metabolomic approaches. This comprehensive review provided an overview of the parasites carried by snail species in the context of gut microbiota studies. We presented the gut microbial trends, a comprehensive summary of the diversity and composition, influencing factors, and potential functions of gastropod gut microbiota. Additionally, we discussed the potential applications, research gaps and future perspectives of gut microbiomes in parasite-transmitting gastropods. Furthermore, several strategies for enhancing our comprehension of gut microbiomes in snails were also discussed.

CONCLUSIONS

This review comprehensively summarizes the current knowledge on the composition, potential function, influencing factors, potential applications, limitations, and challenges of gut microbiomes in gastropods, with a specific emphasis on parasite-transmitting gastropods. These findings provide important insights for future studies aiming to understand the potential role of gastropod gut microbiota in controlling snail populations and snail-borne diseases.

Design of Recyclable Carboxylic Metal-Organic Framework/Chitosan Aerogels for Oil Bleaching

Novel hierarchical metal-organic framework/chitosan aerogel composites were developed for oil bleaching. UiO-66-COOH-type metal organic frameworks (Zr-MOFs) were synthesized and integrated onto a chitosan matrix with different contents and named MOF-aerogel-1 and MOF-aerogel-2. Due to the compatibility of chitosan, the carboxylic zirconium MOF-aerogels not only maintained the inherent chemical accessibility of UiO-66-COOH, but the unique crystallization and structural characteristics of these MOF nanoparticles were also preserved. Through 3-dimensional reconstructed images, aggregation of the UiO-66-COOH particles was observed in MOF-aerogel-1, while the MOF was homogeneously distributed on the surface of the chitosan lamellae in MOF-aerogel-2. All aerogels, with or without immobilized MOF nanoparticles, were capable of removing carotenoids during oil bleaching. MOF-aerogel-2 showed the most satisfying removal proportions of 26.6%, 36.5%, and 47.2% at 50 °C, 75 °C, and 100 °C, respectively, and its performance was very similar to that of commercial activated clay. The reuse performance of MOF-aerogel-2 was tested, and the results showed its exceptional sustainability for carotenoid removal. These findings suggested the effectiveness of the MOFaerogel for potential utilization in oil bleaching treatments.

Relationship between Species Diversity and Community Stability in Degraded Alpine Meadows during Bare Patch Succession

Plant diversity plays an important role in maintaining the stability of ecosystem functioning. Based on field surveys and indoor analyses, this study investigated the relationship between species diversity and community stability at different stages of bare patch succession in degraded alpine meadow ecosystems. Results show that: (1) Using the ICV (the Inverse of the Coefficient of Variation) method to analyze changes in plant community stability, community stability was generally ranked as follows: Long-term recovered patches > Healthy alpine meadow > Degraded alpine meadow > Short-term recovered patch > Bare Patches. (2) Using factor analysis to construct an evaluation system, the stability ranking based on species diversity was as follows: Healthy alpine meadow > Long-term recovered patches > Degraded alpine meadow > Short-term recovered patches > Bare Patches. (3) The community stability index was significantly positively correlated with vegetation coverage, height, biomass, species richness, Shannon-Wiener diversity index, species evenness, and Simpson's diversity index (p < 0.05). Therefore, a positive correlation exists between plant diversity and community stability, such that plant communities with a higher species diversity tend to be more stable. To maintain the plant diversity and community stability of alpine meadow ecosystems, it is necessary to consider the characteristics of grassland plant composition and community structure, as well as their influencing factors, and promote the positive succession process of grasslands.

Metagenomic Analysis Reveals Variations in Gut Microbiomes of the Schistosoma mansoni-Transmitting Snails Biomphalaria straminea and Biomphalaria glabrata

Biomphalaria snails play a crucial role in the transmission of the human blood fluke Schistosoma mansoni. The gut microbiota of intermediate hosts is known to influence their physiological functions, but little is known about its composition and role in Biomphalaria snails. To gain insights into the biological characteristics of these freshwater intermediate hosts, we conducted metagenomic sequencing on Biomphalaria straminea and B. glabrata to investigate variations in their gut microbiota. This study revealed that the dominant members of the gut microbiota in B. glabrata belong to the phyla Bacteroidetes and Proteobacteria, which were also found to be the top two most abundant gut bacteria in B. straminea. We identified Firmicutes, Acidovorax and Bosea as distinctive gut microbes in B. straminea, while Aeromonas, Cloacibacterium and Chryseobacterium were found to be dependent features of the B. glabrata gut microbiota. We observed significant differences in the community structures and bacterial functions of the gut microbiota between the two host species. Notably, we found a distinctive richness of antibiotic resistance genes (ARGs) associated with various classes of antibiotics, including bacitracin, chloramphenicol, tetracycline, sulfonamide, penicillin, cephalosporin_ii and cephalosporin_i, fluoroquinolone, aminoglycoside, beta-lactam, multidrug and trimethoprim, in the digestive tracts of the snails. Furthermore, this study revealed the potential correlations between snail gut microbiota and the infection rate of S. mansoni using Spearman correlation analysis. Through metagenomic analysis, our study provided new insights into the gut microbiota of Biomphalaria snails and how it is influenced by host species, thereby enhancing our understanding of variant patterns of gut microbial communities in intermediate hosts. Our findings may contribute to future studies on gastropod-microbe interactions and may provide valuable knowledge for developing snail control strategies to combat schistosomiasis in the future.

A Conjugated Microporous Polymer/Wood Aerogel with Physical Adsorption, Chemical Degradation and Antibacterial Self-Cleaning Triple Sewage Treatment Functions

Conjugated microporous polymers (CMPs) have important applications in the fields of optoelectronics and sewage treatment due to their high specific surface area, broad visible absorption, processability and simple synthesis process. Biocompatibility, recycling, mass production and solar photodegradation are particularly important in wastewater treatment. Here, A CMP with a high specific surface area and a hierarchical pore structure (CPOP) was constructed based on 4,4',4″-Tris(carbazol-9-yl)-triphenylamine (3CZ-TPA). Furthermore, a CMP-loaded wood aerogel (CPOP/wood aerogel) with physical adsorption, chemical degradation, bacterial inhibition and self-cleaning properties was prepared by in situ polymerization and used for wastewater treatment. The obtained CPOP/wood aerogel is highly biocompatible and easy to recycle. In addition, the inherent broad visible light absorption property of CPOP endows it with promising photocatalytic properties. Subsequently, we investigated the photocatalytic mechanism of CPOP, and the results showed that it was mainly affected by peroxyl radicals, which implied and confirmed its microbial self-cleaning for secondary cleaning of water pollutants. The reported studies on CPOP/wood aerogel provide a new direction for water purification materials with excellent adsorption, degradation and antibacterial properties.

Resistome and Genome Analysis of an Extensively Drug-Resistant Klebsiella michiganensis KMIB106: Characterization of a Novel KPC Plasmid pB106-1 and a Novel Cointegrate Plasmid pB106-IMP Harboring blaIMP-4 and blaSHV-12

Klebsiella michiganensis is a recently emerging human pathogen causing nosocomial infections. This study aimed to characterize the complete genome sequence of a clinical Klebsiella michiganensis strain KMIB106 which exhibited extensive drug-resistance. The whole genome of the strain was sequenced using PacBio RS III systems and Illumina Nextseq 500. Annotation, transposable elements and resistance gene identification were analyzed by RAST, prokka and Plasmid Finder, respectively. According to the results, KMIB106 was resistant to multiple antimicrobials, including carbapenems, but it remained susceptible to aztreonam. The genome of KMIB106 consisted of a single chromosome and three predicted plasmids. Importantly, a novel KPC plasmid pB106-1 was found to carry the array of resistance genes in a highly different order in its variable regions, including mphA, msrE, mphE, ARR-3, addA16, sul1, dfrA27, tetD and fosA3. Plasmid pB106-2 is a typical IncFII plasmid with no resistant gene. Plasmid pB106-IMP consists of the IncN and IncX3 backbones, and two resistance genes, blaIMP-4 and blaSHV-12, were identified. Our study for the first time reported an extensively drug-resistant Klebsiella michiganensis strain recovered from a child with a respiratory infection in Southern China, which carries three mega plasmids, with pB106-1 firstly identified to carry an array of resistance genes in a distinctive order, and pB106-IMP identified as a novel IncN-IncX3 cointegrate plasmid harboring two resistance genes blaIMP-4 and blaSHV-12.

High-throughput process development from gene cloning to protein production

In the post-genomic era, the demand for faster and more efficient protein production has increased, both in public laboratories and industry. In addition, with the expansion of protein sequences in databases, the range of possible enzymes of interest for a given application is also increasing. Faced with peer competition, budgetary, and time constraints, companies and laboratories must find ways to develop a robust manufacturing process for recombinant protein production. In this review, we explore high-throughput technologies for recombinant protein expression and present a holistic high-throughput process development strategy that spans from genes to proteins. We discuss the challenges that come with this task, the limitations of previous studies, and future research directions.

Modeling and Analysis of a Conical Bridge-Type Displacement Amplification Mechanism Using the Non-Uniform Rational B-Spline Curve

This paper presents a new analytical model of a conical bridge-type displacement amplification mechanism (DAM) considering the effect of external loads and a piezostack actuator (PSA). With the merits of simple implementation and better fitting, the non-uniform rational B-spline (NURBS) is employed to parameterize conical connecting beams of the DAM, and an analytical model of the displacement amplification ratio and input stiffness is established based on Castigliano's second theorem. After that, considering the interactions with elastic loads and PSA, the actual displacement amplification ratio of the conical DAM is obtained, and the effect of the shape of connecting beams in the performance of the DAM is further analyzed. The proposed analytical model is verified by finite element analysis (FEA), and the results show a maximum error of 6.31% between the calculated value and FEA results, demonstrating the accuracy of the proposed model. A prototype of the conical DAM with optimized shape is fabricated and experimentally tested, which further validates the effectiveness and accuracy of the proposed analytical model. The proposed model offers a new method for analysis and shape optimization of the bridge-type DAM under specific elastic loads.

Lattice engineering for stabilized black FAPbI3 perovskite single crystals for high-resolution x-ray imaging at the lowest dose

Preliminary theoretical analyses indicate that lattice relaxation may be used to release lattice strain in the FAPbI3 perovskite to warrant both high x-ray detection performance and improved stability. Herein, we demonstrate stable black α-phase FAPbI3 single crystals (SCs) realized by lattice engineering via annealing in the ambient atmosphere. The engineered α-FAPbI3 SC detector shows almost all the best figures of merit including a high sensitivity of 4.15 × 105 μC Gyair-1 cm-2, a low detection limit of 1.1 nGyair s-1, a high resolution of 15.9 lp mm-1, and a short response time of 214 μs. We further demonstrate high-definition x-ray imaging at a dose rate below 10 nGyair s-1 on the FAPbI3 SC, indicating a minimal dose-area product of 0.048 mGyair cm2 to the patient for one-time posteroanterior chest diagnosis, which is more than 3000 times lower than the international reference level of 150 mGyair cm2. In addition, the robust long-term stability enables the FAPbI3 SC x-ray detector to work steadily for more than 40 years.

Isoamericanin A improves lipopolysaccharide-induced memory impairment in mice through suppression of the nicotinamide adenine dinucleotide phosphateoxidase-dependent nuclear factor kappa B signaling pathway

Alzheimer's disease (AD) is the most frequent cause of dementia in the elderly. Isoamericanin A (ISOA) is a natural lignan possessing great potential for AD treatment. This study investigated the efficacy of ISOA on memory impairments in the mice intrahippocampal injected with lipopolysaccharide (LPS) and the underlying mechanism. Y-maze and Morris Water Maze data suggested that ISOA (5 and 10 mg/kg) ameliorated short- and long-term memory impairments, and attenuated neuronal loss and lactate dehydrogenase activity. ISOA exerted anti-inflammatory effect demonstrating by the reduction of ionized calcium-binding adapter molecule 1 positive cells and suppression of marker protein and pro-inflammation cytokines expressions induced by LPS. ISOA suppressed the nuclear factor kappa B (NF-κB) signaling pathway by inhibiting IκBα phosphorylation and NF-κB p65 phosphorylation and nuclear translocation. ISOA inhibited superoxide and intracellular reactive oxygen species accumulation by reducing nicotinamide adenine dinucleotide phosphate (NADPH) oxidase activation, demonstrating by suppressing NADP+ and NADPH contents, gp91phox expression, and p47phox expression and membrane translocation. These effects were enhanced in combination with NADPH oxidase inhibitor apocynin. The neuroprotective effect of ISOA was further proved in the in vitro models. Overall, our data revealed a novel pharmacological activity of ISOA: ameliorating memory impairment in AD via inhibiting neuroinflammation.

Microstructure and Mechanical Properties of Ti/Al-SiC/Ti Clad Plates Prepared via the Powder-in-Tube Method

SiC particle-reinforced Ti/Al/Ti clad plates were successfully fabricated by the powder-in-tube method. The surface micrography, element diffusion, peeling strength and tensile property of clad plates were studied after annealing and cold rolling. The experimental results show that 6 wt.% is optimal. The presence of SiC particles has been seen to significantly enhance the diffusion of Ti and Al elements. Additionally, it has been observed that the diffusion width of the intermetallic compound (IMC) increases as the size of SiC particles grows. However, it is worth noting that the average of Ti/Al-SiC/Ti clad plates initially increases and subsequently falls. The optimized diffusion thickness of the Ti/Al-SiC/Ti clad plate's IMC layer determined via the powder-in-tube method is approximately 4.5 μm. The 1 μm SiC-reinforced Ti/Al/Ti clad plate can obtain the best mechanical properties after annealing at 500 °C and further hot rolling, and the peeling strength, ultimate tensile strength and elongation are 31.5 N/mm, 305 MPa and 26%, respectively. The efficacy of Ti/Al-SiC/Ti clad plates in delivering exceptional performance is substantiated by the analysis of peeling surfaces, peeling tests and tensile testing, which collectively demonstrate the presence of compact and homogenous intermetallic compounds.

Pulsed Electric Field-Assisted Enzymatic and Alcoholic-Alkaline Production of Porous Granular Cold-Water-Soluble Starch: A Carrier with Efficient Zeaxanthin-Loading Capacity

In this study, porous starch was modified using pulsed electric field (PEF) pretreatment and alcoholic-alkaline treatment to prepare porous granular cold-water-soluble starch (P-GCWSS). The soluble porous starch has high adsorption capability and high cold water solubility, allowing effective encapsulation of zeaxanthin and improving zeaxanthin's water solubility, stability, and bioavailability. The physical and chemical properties of GCWSS and complex were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. The results showed that the cold water solubility of the pulsed electric field-treated porous granular cold-water-soluble starch (PEF-P-GCWSS) increased by 12.81% compared to granular cold-water-soluble starch (GCWSS). The pulsed electric field treatment also increased the oil absorption of PEF-P-GCWSS was improved by 15.32% compared to porous granular cold-water-soluble starch (P-GCWSS). PEF-P-GCWSS was effective in encapsulating zeaxanthin, which provided a good protection for zeaxanthin. The zeaxanthin-saturated solubility in water of PPG-Z was increased by 56.72% compared with free zeaxanthin. The zeaxanthin embedded in PEF-P-GCWSS was able to be released slowly during gastric digestion and released rapidly during intestinal digestion.

Low Detection Limit and High Sensitivity 2-Butanone Gas Sensor Based on ZnO Nanosheets Decorated by Co Nanoparticles Derived from ZIF-67

2-butanone has been certified to cause potential harm to the human body, environment, etc. Therefore, achieving a method for the high sensitivity and low limit detection of 2-butanone is of great significance. To achieve this goal, this article uses ZIF-67 prepared by a precipitation method as a cobalt source, and then prepares cobalt-modified zinc oxide nanosheets through a hydrothermal method. The microstructure of the materials was observed by SEM, EDS, TEM, HRTEM, XPS and XRD. The test data display that the sensor ZC2 can produce a high response (2540) to 100 ppm 2-butanone at 270 °C, which is 21 times higher than that of pure ZnO materials. Its detection limit is also optimized to 24 ppb. The sensor (ZC2) also excels in these properties: selectivity, repeatability and stability over 30 days. Further analysis indicates that the synergistic and catalytic effects of p-n heterojunction are the key sources for optimizing the performance of sensors for detecting 2-butanone.

Research Progress and Prospect of Stimuli-Responsive Lignin Functional Materials

As the world's second most abundant renewable natural phenolic polymer after cellulose, lignin is an extremely complex, amorphous, highly cross-linked class of aromatic polyphenolic macromolecules. Due to its special aromatic structure, lignin is considered to be one of the most suitable candidates to replace fossil materials, thus the research on lignin functional materials has received extensive attention. Because lignin has stimuli-sensitive groups such as phenolic hydroxyl, hydroxyl, and carboxyl, the preparation of stimuli-responsive lignin-based functional materials by combining lignin with some stimuli-responsive polymers is a current research hotspot. Therefore, this article will review the research progress of stimuli-responsive lignin-based functional materials in order to guide the subsequent work. Firstly, we elaborate the source and preparation of lignin and various types of lignin pretreatment methods. We then sort out and discuss the preparation of lignin stimulus-responsive functional materials according to different stimuli (pH, light, temperature, ions, etc.). Finally, we further envision the scope and potential value of lignin stimulus-responsive functional materials for applications in actuators, optical coding, optical switches, solar photothermal converters, tissue engineering, and biomedicine.

An Investigation of the Anisotropic Fatigue Properties of Laser Additively Manufactured Ti-6Al-4V under Vibration Loading

Laser additively manufactured (LAM) Ti-6Al-4V alloy has huge application potential in aerospace structural parts such as turbine blades. However, there are few studies on the fatigue properties of such LAM parts under vibration loading, particularly with regard to anisotropy. In this paper, vibration fatigue properties of LAM Ti-6Al-4V by laser melted deposition were investigated along the transversely deposited (TD) and parallelly deposited (PD) directions. Through the first-order bending vibration experiments, the LAM Ti-6Al-4V alloy exhibits obvious anisotropic fatigue properties and significant dispersion in fracture position. The fracture morphology analysis reveals that the vibration fatigue failure was mainly dominated by process-induced defects and microstructure. The fatigue strength at 10⁶ cycles of the samples with defect-free failure features (DFF) at initiation sites is 470.9 MPa in PD and 434.2 Mpa in TD, while that of the samples with defect-related failure features (DRF) at initiation sites is 364.2 Mpa in PD and 381.0 Mpa in TD. For the DFF group, the fatigue behavior is controlled by the prior β columnar grains with preferential orientation, which leads to enhanced fatigue crack propagation resistance for the PD samples. For the DRF group, which has lower fatigue lives, the fatigue anisotropy strongly depends on the projection area of the lack-of-fusion defects relative to the loading direction, resulting in better fatigue performance for the TD samples.

Identification and Characterization of α-Actinin 1 of Histomonas meleagridis and Its Potential Vaccine Candidates against Histomonosis

Histomonas meleagridis is a protozoan parasite that causes histomonosis in gallinaceous birds such as turkeys and chickens. Since the banning and restricted usage of effective drugs such as nitarsone, 80-100% morbidity and mortality occur in turkeys and 20-30% mortality in chickens. New ideas are needed to resolve the re-emergence of histomonosis in poultry. In this study, the α-actinin encoding gene from H. meleagridis was cloned. The 1839-bp gene encoding 612 amnio acids showed close phylogenetic relationships with Trichomonas vaginalis and Tritrichomonas foetus. It was then inserted into the prokaryotic expression vector pET28a(+) and induced with isopropyl-β-D-thiogalactopyranoside. A 73 kDa recombinant protein rHmα-actinin 1 was obtained and purified with a Ni-NTA chromatography column. rHmα-actinin 1 was recognized by mouse anti-rHmα-actinin 1 polyclonal antibody, mouse anti-rHmα-actinin 1 monoclonal antibody, and rehabilitation sera from H. meleagridis infected chickens. Native α-actinin 1 in the total proteins of H. meleagridis can also be detected with mouse anti-rHmα-actinin monoclonal antibody. Immunolocalization assays showed that Hmα-actinin 1 was mainly distributed in the cytoplasm of virulent histomonads JSYZ-D9 and in the peripheral regions (near the plasma membrane) of attenuated histomonads JSYZ-D195. Based on in vivo experiment, when chickens were subcutaneously immunized with rHmα-actinin 1 at 5 and 12 days old and then challenged with H. meleagridis at 19 days old, rHmα-actinin 1 reduced the lesion scores 12 days after infection (31 days old) and increased the body weight gain during the challenged period (19-31 days old). Furthermore, it also strengthened the cellular and humoral immune responses 7 days after the second immunization (19 days old). In conclusion, Hmα-actinin 1 could be used as a candidate antigen to develop vaccines against chicken histomonosis.

Stent-Graft Fabrics Incorporating a Specific Corona Ready to Fenestrate

In situ fenestration of endovascular stent-grafts has become a mainstream bailout technique to treat complex emergent aneurysms while maintaining native anatomical visceral and aortic arch blood supplies. Fabric tearing from creating the in situ fenestration using balloon angioplasty may extend beyond the intended diameter over time. Further tearing may result from the physiologic pulsatile motion at the branching site. A resultant endoleak at the fenestrated sites in stent-grafts could ultimately lead to re-pressurization of the aortic sac and, eventually, rupture. In an attempt to address this challenge, plain woven fabrics were designed. They hold a specific corona surrounding a square-shaped cluster with a plain weave fabric structure, a 2/2 twill, or a honeycomb. The corona was designed to stop potential further tearing of the fabric caused by the initial balloon angioplasty and stent or later post-implantation motion. The cluster within the corona was designed with relatively loose fabric structures (plain weave, 2/2 twill weave, and honeycomb) to facilitate the laser fenestration. Two commercial devices, Anaconda (Vascutek, Terumo Aortic) and Zenith TX2 (Cook), were selected as controls for comparison against this new design. All the specimens were characterized by morphology, thickness, and water permeability. The results demonstrated that all specimens with a low thickness and water permeability satisfied the requirements for a stent graft material that would be low profile and resistant to endoleaks. The in situ fenestrations were performed on all fabrics utilizing an Excimer laser followed by balloon angioplasty. The fabrics were further observed by light microscopy and scanning electron microscopy. The dimension of the fenestrated apertures was smaller than the balloon's diameter. The tearing was effectively confined within the corona. The clinical acceptability of this concept deserves additional bench testing and animal experimentation.

Combined genome-wide association study of 136 quantitative ear morphology traits in multiple populations reveal 8 novel loci

Human ear morphology, a complex anatomical structure represented by a multidimensional set of correlated and heritable phenotypes, has a poorly understood genetic architecture. In this study, we quantitatively assessed 136 ear morphology traits using deep learning analysis of digital face images in 14,921 individuals from five different cohorts in Europe, Asia, and Latin America. Through GWAS meta-analysis and C-GWASs, a recently introduced method to effectively combine GWASs of many traits, we identified 16 genetic loci involved in various ear phenotypes, eight of which have not been previously associated with human ear features. Our findings suggest that ear morphology shares genetic determinants with other surface ectoderm-derived traits such as facial variation, mono eyebrow, and male pattern baldness. Our results enhance the genetic understanding of human ear morphology and shed light on the shared genetic contributors of different surface ectoderm-derived phenotypes. Additionally, gene editing experiments in mice have demonstrated that knocking out the newly ear-associated gene (Intu) and a previously ear-associated gene (Tbx15) causes deviating mouse ear morphology.

Structural and functional neural substrates underlying the concreteness effect

The concreteness effect refers to the advantage in speed and accuracy of processing concrete words over abstract words. Previous studies have shown that the processing of the two types of words is mediated by distinct neural mechanisms, but these studies were mainly conducted with task-based functional magnetic resonance imaging. This study investigates the associations between the concreteness effect and grey matter volume (GMV) of brain regions as well as resting-state functional connectivity (rsFC) of these identified regions. The results show that the GMV of left inferior frontal gyrus (IFG), right middle temporal gyrus (MTG), right supplementary motor area and right anterior cingulate cortex (ACC) negatively correlates with the concreteness effect. The rsFC of the left IFG, the right MTG and the right ACC with the nodes, mainly in default mode network, frontoparietal network and dorsal attention network positively correlates with the concreteness effect. The GMV and rsFC jointly and respectively predict the concreteness effect in individuals. In conclusion, stronger connectivity amongst functional networks and higher coherent engagement of the right hemisphere predict a greater difference in the verbal memory of abstract and concrete words.

First Report of Small Skeletal Fossils from the Upper Guojiaba Formation (Series 2, Cambrian), Southern Shaanxi, South China

A small skeletal fossil assemblage is described for the first time from the bioclastic limestone interbeds of the siltstone-dominated Guojiaba Formation, southern Shaanxi, China. The carbonate-hosted fossils include brachiopods (Eohadrotreta zhujiahensis, Eohadrotreta zhenbaensis, Spinobolus sp., Kuangshanotreta malungensis, Kyrshabaktella sp., Lingulellotreta yuanshanensis, Eoobolus incipiens, and Eoobolus sp.), sphenothallids (Sphenothallus sp.), archaeocyaths (Robustocyathus sp. and Yukonocyathus sp.), bradoriids (Kunmingella douvillei), chancelloriids sclerites (Onychia sp., Allonnia sp., Diminia sp., Archiasterella pentactina, and Chancelloria cf. eros), echinoderm plates, fragments of trilobites (Eoredlichia sp.), and hyolithelminths. The discovery of archaeocyaths in the Guojiaba Formation significantly extends their stratigraphic range in South China from the early Tsanglangpuian at least to the late Chiungchussuan. Thus, the Guojiaba Formation now represents the lowest known stratigraphic horizon where archaeocyath fossils have been found in the southern Shaanxi area. The overall assemblage is most comparable, in terms of composition, to Small skeletal fossil (SSF) assemblages from the early Cambrian Chengjiang fauna recovered from the Yu'anshan Formation in eastern Yunnan Province. The existing position that the Guojiaba Formation is correlated with Stage 3 in Cambrian Series 2 is strongly upheld based on the fossil assemblage recovered in this study.

Natural flavonoids disrupt bacterial iron homeostasis to potentiate colistin efficacy

In the face of the alarming rise in global antimicrobial resistance, only a handful of novel antibiotics have been developed in recent decades, necessitating innovations in therapeutic strategies to fill the void of antibiotic discovery. Here, we established a screening platform mimicking the host milieu to select antibiotic adjuvants and found three catechol-type flavonoids-7,8-dihydroxyflavone, myricetin, and luteolin-prominently potentiating the efficacy of colistin. Further mechanistic analysis demonstrated that these flavonoids are able to disrupt bacterial iron homeostasis through converting ferric iron to ferrous form. The excessive intracellular ferrous iron modulated the membrane charge of bacteria via interfering the two-component system pmrA/pmrB, thereby promoting the colistin binding and subsequent membrane damage. The potentiation of these flavonoids was further confirmed in an in vivo infection model. Collectively, the current study provided three flavonoids as colistin adjuvant to replenish our arsenals for combating bacterial infections and shed the light on the bacterial iron signaling as a promising target for antibacterial therapies.

Identifying the drivers of changes in embodied food-energy-water in the Bohai mega-urban region, China: A perspective of final demands

Food-energy-water (FEW) systems in the Bohai mega-urban region (MUR) have experienced astonishing changes in recent decades; however, the dynamics of these changes are not fully understood. This study combined an ecological multiscale input-output model and a structural decomposition analysis (SDA) to explore the variation in embodied FEW consumption and its drivers. The results showed that, although almost all sectoral embodied FEW intensities decreased, embodied FEW demands increased by approximately 9.9×10⁸ tons, 4.61×10⁷ TJ and 1.1×10¹¹ m³ over 10-year period. The embodied FEW flow diagrams show that local consumption and trade were strengthened. Urban household consumption, fixed capital formation and exports were the main components affecting the embodied FEW use increases. An SDA revealed that the consumption level effect (∆c) was the dominant contributor that promoted the increase in the Bohai MUR's embodied FEW consumption. The scale effect (∆p) also had a positive effect on the embodied FEW consumption increases. The technological effect (∆e) was the primary contributor to offset the embodied FEW consumption increase. The economic efficiency effect (∆L) and structural effect (∆s_d) also contributed to offsetting the total embodied FEW consumption increase. The effect of the change in domestic and foreign imports (∆D and ∆F) impacted the increase in embodied FEW mainly through the change in the embodied FEW intensities and trade volumes. This study identified the changes in FEW systems and highlighted future coping strategies.

Mitogenome Characterization of Four Conus Species and Comparative Analysis

Cone snails, as a type of marine organism, have rich species diversity. Traditionally, classifications of cone snails were based mostly on radula, shell, and anatomical characters. Because of these phenotypic features' high population variability and propensity for local adaptation and convergence, identifying species can be difficult and occasionally inaccurate. In addition, mitochondrial genomes contain high phylogenetic information, so complete mitogenomes have been increasingly employed for inferring molecular phylogeny. To enrich the mitogenomic database of cone snails (Caenogastropoda: Conidae), mitogenomes of four Conus species, i.e., C. imperialis (15,505 bp), C. literatus (15,569 bp), C. virgo (15,594 bp), and C. marmoreus (15,579 bp), were characterized and compared. All 4 of these mitogenomes included 13 protein-coding genes, 2 ribosomal RNA genes, 22 tRNA genes, and non-coding regions. All the Protein Codon Genes (PCGs) of both newly sequenced mitogenomes used TAA or TAG as a terminal codon. Most PCGs used conventional start codon ATG, but an alternative initiation codon GTG was detected in a gene (NADH dehydrogenase subunit 4 (nad4)) of C. imperialis. In addition, the phylogenetic relationships were reconstructed among 20 Conus species on the basis of PCGs, COX1, and the complete mitogenome using both Bayesian Inference (BI) and Maximum Likelihood (ML). The phylogenetic results supported that C. litteratus, C. quercinus, and C. virgo were clustered together as a sister group (PP = 1, BS = 99), but they did not support the phylogenetic relation of C. imperialis and C. tribblei (PP = 0.79, BS = 50). In addition, our study established that PCGs and complete mitogenome are the two useful markers for phylogenetic inference of Conus species. These results enriched the data of the cone snail's mitochondrion in the South China Sea and provided a reliable basis for the interpretation of the phylogenetic relationship of the cone snail based on the mitochondrial genome.

A General Synthesis of Cross-Conjugated Enynones through Pd Catalyzed Sonogashira Coupling with Triazine Esters

The palladium-catalyzed Sonogashira coupling of α, β-unsaturated acid derivatives offers a diversity-oriented synthetic strategy for cross-conjugated enynones. However, the susceptibility of the unsaturated C-C bonds adjacent to the carbonyl group toward Pd catalysts makes the direct conversion of α, β-unsaturated derivatives as acyl electrophiles to cross-conjugated ketones rare. This work presents a highly selective C-O activation approach to prepare cross-conjugated enynones using α, β-unsaturated triazine esters as acyl electrophiles. Under base and phosphine ligand-free conditions, NHC-Pd(II)-Allyl precatalyst alone catalyzed the cross-coupling of α, β-unsaturated triazine esters with terminal alkynes efficiently, yielding 31 cross-conjugated enynones with diverse functional groups. This method demonstrates the potential of triazine-mediated C-O activation for preparing highly functionalized ketones.

Porcine Respirovirus 1 Suppresses Host Type I Interferon Production and the JAK-STAT Signaling Pathway

Porcine respirovirus 1 (PRV1), first reported in Hong Kong, is currently widely spread in several countries. Our knowledge of the clinical significance and the pathogenicity of this virus is still limited. In this study, we studied the interactions between PRV1 and host innate immune responses. PRV1 exhibited strong inhibitory effects on the production of interferon (IFN), ISG15, and RIG-I induced by SeV infection. Our data generated in vitro suggest that multiple viral proteins can suppress host type I interferon production and signaling, including N, M, and P/C/V/W. The P gene products disrupt both IRF3 and NF-κB dependent type I IFN production and block type I IFN signaling pathway by sequestering STAT1 in the cytoplasm. The V protein disrupts both MDA5 signaling and RIG-I signaling through interaction with TRIM25 and RIG-I, V protein blocks RIG-I polyubiquitination, which is required for RIG-I activation. V protein also binds to MDA5, which may contribute to its inhibitory effect on MDA5 signaling. These findings indicate that PRV1 antagonizes host innate immune responses using various mechanisms, which provides important insights into the pathogenicity of PRV1.

Molecular Determinants of Species Specificity of α-Conotoxin TxIB towards Rat and Human α6/α3β4 Nicotinic Acetylcholine Receptors

Conotoxins are widely distributed and important for studying ligand-gated ion channels. TxIB, a conotoxin consisting of 16 amino acids derived from Conus textile, is a unique selective ligand that blocks rat α6/α3β2β3 nAChR (IC₅₀ = 28 nM) without affecting other rat subtypes. However, when the activity of TxIB against human nAChRs was examined, it was unexpectedly found that TxIB had a significant blocking effect on not only human α6/α3β2β3 nAChR but also human α6/α3β4 nAChR, with an IC₅₀ of 537 nM. To investigate the molecular mechanism of this species specificity and to establish a theoretical basis for drug development studies of TxIB and its analogs, different amino acid residues between human and rat α6/α3 and β4 nAChR subunits were identified. Each residue of the human species was then substituted with the corresponding residue of the rat species via PCR-directed mutagenesis. The potencies of TxIB towards the native α6/α3β4 nAChRs and their mutants were evaluated through electrophysiological experiments. The results showed that the IC₅₀ of TxIB against h[α6_{V32L, K61R}/α3]β4_{L107V, V115I} was 22.5 μM, a 42-fold decrease in potency compared to the native hα6/α3β4 nAChR. Val-32 and Lys-61 in the human α6/α3 subunit and Leu-107 and Val-115 in the human β4 subunit, together, were found to determine the species differences in the α6/α3β4 nAChR. These results also demonstrate that the effects of species differences between humans and rats should be fully considered when evaluating the efficacy of drug candidates targeting nAChRs in rodent models.

Effects of the Addition of Amino-Terminated Highly Branched Polyurea on Curing Properties of Phenol-Formaldehyde Resin

In this work, a highly branched polyurea (HBP-NH₂) similar to urea structure was introduced to phenol-formaldehyde (PF) resin to accelerate itscuring speed The results of gel time and bonding strength were combined to obtain a good modified additional stage and amount of HBP-NH₂. The relative molar mass changes of HBP-NH₂-modified PF resin were investigated by gel permeation chromatography (GPC). The effects of HBP-NH₂ on the curing of PF resin were investigated by differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The effect of HBP-NH₂ on the structure of PF resin was also investigated by nuclear magnetic resonance carbon spectroscopy (¹³C-NMR). The test results show that the gel time of the modified PF resin was reduced by 32% and 51% at 110 °C and 130 °C, respectively. Meanwhile, the addition of HBP-NH₂ increased the relative molar mass of PF resin. The bonding strength test showed that the bonding strength of modified PF resin increased by 22% after soaking in boiling water (93 °C ± 2) for 3 h. The DSC and DMA analysis indicated that the curing peak temperature decreased from 137 °C to 102 °C, and the curing rate of the modified PF resin was also faster than that of the pure PF resin. The ¹³C-NMR results showed that HBP-NH₂ in the PF resin reacted to produce a co-condensation structure. Finally, the possible reaction mechanism of HBP-NH₂ for the modification of PF resin was given.

Systematic identification of endogenous strong constitutive promoters from the diazotrophic rhizosphere bacterium Pseudomonas stutzeri DSM4166 to improve its nitrogenase activity

BACKGROUND

Biological nitrogen fixation converting atmospheric dinitrogen to ammonia is an important way to provide nitrogen for plants. Pseudomonas stutzeri DSM4166 is a diazotrophic Gram-negative bacterium isolated from the rhizosphere of cereal Sorghum nutans. Endogenous constitutive promoters are important for engineering of the nitrogen fixation pathway, however, they have not been systematically characterized in DSM4166.

RESULTS

Twenty-six candidate promoters were identified from DSM4166 by RNA-seq analysis. These 26 promoters were cloned and characterized using the firefly luciferase gene. The strengths of nineteen promoters varied from 100 to 959% of the strength of the gentamicin resistance gene promoter. The strongest P12445 promoter was used to overexpress the biological nitrogen fixation pathway-specific positive regulator gene nifA. The transcription level of nitrogen fixation genes in DSM4166 were significantly increased and the nitrogenase activity was enhanced by 4.1 folds determined by the acetylene reduction method. The nifA overexpressed strain produced 359.1 µM of extracellular ammonium which was 25.6 times higher than that produced by the wild-type strain.

CONCLUSIONS

The endogenous strong constitutive promoters identified in this study will facilitate development of DSM4166 as a microbial cell factory for nitrogen fixation and production of other useful compounds.

Loop2 Size Modification Reveals Significant Impacts on the Potency of α-Conotoxin TxID

α4/6-conotoxin TxID, which was identified from Conus textile, simultaneously blocks rat (r) α3β4 and rα6/α3β4 nicotinic acetylcholine receptors (nAChRs) with IC₅₀ values of 3.6 nM and 33.9 nM, respectively. In order to identify the effects of loop2 size on the potency of TxID, alanine (Ala) insertion and truncation mutants were designed and synthesized in this study. An electrophysiological assay was used to evaluate the activity of TxID and its loop2-modified mutants. The results showed that the inhibition of 4/7-subfamily mutants [+9A]TxID, [+10A]TxID, [+14A]TxID, and all the 4/5-subfamily mutants against rα3β4 and rα6/α3β4 nAChRs decreased. Overall, ala-insertion or truncation of the 9th, 10th, and 11th amino acid results in a loss of inhibition and the truncation of loop2 has more obvious impacts on its functions. Our findings have strengthened the understanding of α-conotoxin, provided guidance for further modifications, and offered a perspective for future studies on the molecular mechanism of the interaction between α-conotoxins and nAChRs.

Reducing Interface Defects and Porosity of Adhesive Bonded Aluminum Alloy Joints via Ultrasonic Vibration

The surface microstructure formed by physical or chemical modification is essential for the desired joint strength. However, defects in the bonding interface and adhesive can be found. Such defects decrease shear strength and durability. In this study, ultrasonic vibration was applied to liquid adhesive on the sandblasted aluminum alloy plates. With ultrasonic treatment, the joints obtained the compact bonding interfaces and lower porosity of the adhesive layer. The treatment improved the shear strength by 9.1%. After two weeks of hydrothermal aging, the shear strength of joints only sandblasted decreased drastically by 48.9%, while it was 14% for the joints with ultrasonic vibration. The cavitation effect in the adhesive was detected by the aluminum foil erosion method. The result showed that a great number of micro-jets generated by the cavitation effect have intensive impact on the bonding interface which provide the adhesive with powerful force to fill the micro-grooves. Another finding in this work is that bubbles were gathered in the adhesive away from the vibration area. This mechanism was successfully used to reduce the porosity of the adhesive layer of joints.

Fungal Selectivity and Biodegradation Effects by White and Brown Rot Fungi for Wood Biomass Pretreatment

The biodegradation path and mechanism of wood varies depending on diverse fungi and tree species, as fungi possess selectivity in degradation of versatile wood components. This paper aims to clarify the actual and precise selectivity of white and brown rot fungi and the biodegradation effects on different tree species. Softwood (Pinus yunnanensis and Cunninghamia lanceolata) and hardwood (Populus yunnanensis and Hevea brasiliensis) were subjected to a biopretreating process by white rot fungus Trametes versicolor, and brown rot fungi Gloeophyllum trabeum and Rhodonia placenta with various conversion periods. The results showed that the white rot fungus Trametes versicolor had a selective biodegradation in softwood, which preferentially convert wood hemicellulose and lignin, but cellulose was retained selectively. Conversely, Trametes versicolor achieved simultaneous conversion of cellulose, hemicellulose and lignin in hardwood. Both brown rot fungi species preferentially converted carbohydrates, but R. placenta had a selectivity for the conversion of cellulose. In addition, morphological observation showed that the microstructures within wood changed significantly, and the enlarged pores and the improved accessibility could be beneficial for the penetration and accessibility of treating substrates. The research outcomes could serve as fundamental knowhows and offer potentials for effective bioenergy production and bioengineering of bioresources, and provide a reference for further application of fungal biotechnology.

Blue LED light promoting the growth, accumulation of high-value isoflavonoids and astragalosides, antioxidant response, and biosynthesis gene expression in Astragalus membranaceus (Fisch.) Bunge hairy root cultures

The root of Astragalus membranaceus (Fisch.) Bunge is one of the most frequently used herbs in traditional Chinese medicine (TCM) formulae for fighting COVID-19 infections, due to the presence of isoflavonoids and astragalosides associated with antiviral and immune-enhancing activities. For the first time, the exposure of A. membranaceus hairy root cultures (AMHRCs) to different colors of LED lights i.e., red, green, blue, red/green/blue (1/1/1, RGB), and white, was conducted to promote the root growth and accumulation of isoflavonoids and astragalosides. LED light treatment regardless of colors was found beneficial for root growth, which might be a result of the formation of more root hairs upon light stimulation. Blue LED light was found most effective for enhancing phytochemical accumulation. Results showed that the productivity of root biomass in blue-light grown AMHRCs with an initial inoculum size of 0.6% for 55 days was 1.40-fold higher than that in dark (control), and yields of high-value isoflavonoids and astragalosides including calycosin, formononetin, astragaloside IV, and astragaloside I increased by 3.17-fold, 2.66-fold, 1.78-fold, and 1.52-fold relative to control, respectively. Moreover, the photooxidative stress together with transcriptional activation of biosynthesis genes might contribute to the enhanced accumulation of isoflavonoids and astragalosides in blue-light grown AMHRCs. Overall, this work offered a feasible approach for obtaining higher yields of root biomass and medicinally important compounds in AMHRCs via the simple supplementation of blue LED light, which made blue-light grown AMHRCs industrially attractive as plant factory in controlled growing systems.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s11240-023-02486-7.

Fully recyclable multifunctional adhesive with high durability, transparency, flame retardancy, and harsh-environment resistance

Recyclable/reversible adhesives have attracted growing attention for sustainability and intelligence but suffer from low adhesion strength and poor durability in complex conditions. Here, we demonstrate an aromatic siloxane adhesive that exploits stimuli-responsive reversible assembly driven by π-π stacking, allowing for elimination and activation of interfacial interactions via infiltration-volatilization of ethanol. The robust cohesive energy from water-insensitive siloxane assembly enables durable strong adhesion (3.5 MPa shear strength on glasses) on diverse surfaces. Long-term adhesion performances are realized in underwater, salt, and acid/alkali solutions (pH 1-14) and at low/high temperatures (-10-90°C). With reversible assembly/disassembly, the adhesive is closed-loop recycled (~100%) and reused over 100 times without adhesion loss. Furthermore, the adhesive has unique combinations of high transparency (~98% in the visible light region of 400-800 nm) and flame retardancy. The experiments and theoretical calculations reveal the corresponding mechanism at the molecular level. This π-π stacking-driven siloxane assembly strategy opens up an avenue for high-performance adhesives with circular life and multifunctional integration.