Infection Microenvironment-Responsive Coating on Titanium Surfaces for On-Demand Release of Therapeutic Gas and Antibiotic

Aseptic loosening and bacterial infection pose significant challenges in the clinical application of titanium (Ti) orthopedic implants, which are primarily caused by insufficient osseointegration and bacterial contamination. To address these issues, a responsive coating on Ti surface is constructed, which achieves enhanced osseointegration and infection elimination by on-demand release of therapeutic gas hydrogen sulfide (H2S) and antibiotic. TiO2 nanotubes (TNT) are anodized on the Ti surface to enhance its bioactivity and serve as reservoirs for the antibiotic. An infection microenvironment-responsive macromolecular H2S donor layer is coated on top of TNT to inhibit premature leakage of antibiotic. This layer exhibits a sustained release of low-dosage H2S, which is capable of promoting the osteogenic differentiation and migration of cells. Moreover, the compactness of the macromolecular H2S donor layer could be broken by bacterial invasion, leading to rapid antibiotic release thus preventing infection. In vitro antibacterial experiments validates significant antibacterial activity of the coating against both Gram-negative (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus). Crucially, this coating effectively suppresses implant-associated infection with 98.7% antibacterial efficiency in a rat femoral bone defect model, mitigates inflammation at the defect site and promotes osseointegration of the Ti orthopedic implant.

Enhancing Stability and Efficiency of Inverted Inorganic Perovskite Solar Cells with In-Situ Interfacial Cross-Linked Modifier

Inverted inorganic perovskite solar cells (PSCs) is potential as the top cells in tandem configurations, owing to the ideal bandgap, good thermal and light stability of inorganic perovskites. However, challenges such as mismatch of energy levels between charge transport layer and perovskite, significant non-radiative recombination caused by surface defects, and poor water stability have led to the urgent need for further improvement in the performance of inverted inorganic PSCs. Herein, the fabrication of efficient and stable CsPbI3-x Brx PSCs through surface treatment of (3-mercaptopropyl) trimethoxysilane (MPTS), is reported. The silane groups in MPTS can in situ crosslink in the presence of moisture to build a 3-dimensional (3D) network by Si-O-Si bonds, which forms a hydrophobic layer on perovskite surface to inhibit water invasion. Additionally, -SH can strongly interact with the undercoordinated Pb2+ at the perovskite surface, effectively minimizing interfacial charge recombination. Consequently, the efficiency of the inverted inorganic PSCs improves dramatically from 19.0% to 21.0% under 100 mW cm-2 illumination with MPTS treatment. Remarkably, perovskite films with crosslinked MPTS exhibit superior stability when soaking in water. The optimized PSC maintains 91% of its initial efficiency after aging 1000 h in ambient atmosphere, and 86% in 800 h of operational stability testing.

Hydrogels for the Treatment of Myocardial Infarction: Design and Therapeutic Strategies

Cardiovascular diseases (CVDs) have become the leading global burden of diseases in recent years and are the primary cause of human mortality and loss of healthy life expectancy. Myocardial infarction (MI) is the top cause of CVDs-related deaths, and its incidence is increasing worldwide every year. Recently, hydrogels have garnered great interest from researchers as a promising therapeutic option for cardiac tissue repair after MI. This is due to their excellent properties, including biocompatibility, mechanical properties, injectable properties, anti-inflammatory properties, antioxidant properties, angiogenic properties, and conductive properties. This review discusses the advantages of hydrogels as a novel treatment for cardiac tissue repair after MI. The design strategies of various hydrogels in MI treatment are then summarized, and the latest research progress in the field is classified. Finally, the future perspectives of this booming field are also discussed at the end of this review.

Defect Passivation and Lithium Ion Coordination Via Hole Transporting Layer Modification for High Performance Inorganic Perovskite Solar Cells

Metal halide inorganic perovskite solar cells (PSCs) have great potential to achieve high efficiency with excellent thermal stability. However, the surface defect traps restrain the achievement of high open circuit voltage (VOC ) and power conversion efficiency (PCE) of the devices due to the severe nonradiative charge recombination. Moreover, the state-of-the-art hole transporting layer (HTL) significantly hampers device moisture stability, even though it renders the highest solar cell efficiency. Herein, a one-stone-two-birds strategy is proposed using a biocompatible material tryptamine (TA) as an additive in HTL. First, TA bearing electron rich moieties can favorably passivate the surface defects of inorganic perovskite films, significantly reducing trap density and prolonging charge lifetime. It results in a drastic improvement of VOC from 1.192 to 1.251 V, with a VOC loss of 0.48 V. The corresponding PSCs achieve a 21.8% PCE under 100 mW cm-2 illumination. Second, TA in HTL can coordinate with lithium cations, retarding their reaction with moisture and increasing the moisture stability of HTL. Consequently, the black phase of inorganic perovskite films is well preserved, and the corresponding PSCs maintain 90% of the initial PCE after 800 h storage at relative humidity of 25-35%, much higher than the control devices.

Strengthened Surface Modification for High-Performance Inorganic Perovskite Solar Cells with 21.3% Efficiency

Metal halide inorganic perovskites show excellent thermal stability compared to organic-inorganic perovskites. However, the performance of inorganic perovskite solar cells (PSCs) is far from theoretical values, together with unsatisfactory stability, mainly due to the poor interfacial properties. In this work, a facial but effective method is reported to realize high-performance inorganic PSCs by post-modifying the perovskite surface with 2-thiophene ethylamine (TEA). It is found that amine group from TEA can favorably interact with the undercoordinated Pb2+ via Lewis acid-based coordination, while thiophene ring with electron-rich sulfur assists such interaction by functioning as an electron donor. The synergetic interaction allows TEA to passivate perovskite film defects more efficiently, as compared to phenethylamine (PEA) with less electron-donating ability. Moreover, perovskite valence band is slightly upward shift to match with hole transport material and facilitate hole transfer. These combinations result in a reduced non-radiative charge recombination and improved charge carrier lifetime. Consequently, PSCs with TEA modification shows a drastic improvement of VOC by 54 mV, yielding a champion PCE of 21.3%, much higher than the control PSCs (19.3%), along with improved ambient stability. This work demonstrates that surface modifier with an electron-rich moiety is critical for achieving efficient and stable inorganic PSCs.

Molecular Bridge on Buried Interface for Efficient and Stable Perovskite Solar Cells

The interface of perovskite solar cells (PSCs) is significantly important for charge transfer and device stability, while the buried interface with the impact on perovskite film growth has been paid less attention. Herein, we use a molecular modifier, glycocyamine (GDA) to build a molecular bridge on the buried interface of SnO2 /perovskite, resulting in superior interfacial contact. This is achieved through the strongly interaction between GDA and SnO2 , which also appreciably modulates the energy level. Moreover, GDA can regulate the perovskite crystal growth, yielding perovskite film with enlarged grain size and absence of pinholes, exhibiting substantially reduced defect density. Consequently, PSCs with GDA modification demonstrate significant improvement of open circuit voltage (close to 1.2 V) and fill factor, leading to an improved power conversion efficiency from 22.60 % to 24.70 %. Additionally, stabilities of GDA devices under maximum power point and 85 °C heat both perform better than the control devices.

Photosynthesis of Hydrogen Peroxide Based on g-C3 N4 : The Road of a Cost-Effective Clean Fuel Production

Emerging artificial photosynthesis promises to offer a competitive means for solar energy conversion and further solves the energy crisis facing the world. Hydrogen peroxide (H2 O2 ), which is considered as a benign oxidant and a prospective liquid fuel, has received worldwide attention in the field of artificial photosynthesis on account of the source materials are just oxygen, water, and sunlight. Graphitic carbon nitride (g-C3 N4 )-based photocatalysts for H2 O2 generation have attracted extensive research interest due to the intrinsic properties of g-C3 N4 . In this review, research processes for H2 O2 generation on the basis of g-C3 N4 , including development, fabrication, merits, and disadvantages, and the state-of-the-art methods to enhance the performance are summarized after a brief introduction and the mechanism analysis of an efficient catalytic system. Also, recent applications of g-C3 N4 -based photocatalysts for H2 O2 production are reviewed, and the significance of active sites and synthetic pathways are highlighted from the view of reducing barriers. Finally, this paper ends with some concluding remarks to reveal the issues and opportunities of g-C3 N4 -based photocatalysts for producing H2 O2 in a high yield.

Mechanical penetration of β-lactam-resistant Gram-negative bacteria by programmable nanowires

β-Lactam-resistant (BLR) Gram-negative bacteria that are difficult or impossible to treat are causing a global health threat. However, the development of effective nanoantibiotics is limited by the poor understanding of changes in the physical nature of BLR Gram-negative bacteria. Here, we systematically explored the nanomechanical properties of a range of Gram-negative bacteria (Salmonella, Escherichia coli, Pseudomonas aeruginosa, and Klebsiella pneumoniae) with different degrees of β-lactam resistance. Our observations indicated that the BLR bacteria had cell stiffness values almost 10× lower than that of β-lactam-susceptible bacteria, caused by reduced peptidoglycan biosynthesis. With the aid of numerical modeling and experimental measurements, we demonstrated that these stiffness findings can be used to develop programmable, stiffness-mediated antimicrobial nanowires that mechanically penetrate the BLR bacterial cell envelope. We anticipate that these stiffness-related findings will aid in the discovery and development of novel treatment strategies for BLR Gram-negative bacterial infections.