101
|
Modeling and Simulation of Process Technology for Nanoparticulate Drug Formulations-A Particle Technology Perspective. Pharmaceutics 2020; 13:pharmaceutics13010022. [PMID: 33374375 PMCID: PMC7823784 DOI: 10.3390/pharmaceutics13010022] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/19/2020] [Revised: 12/09/2020] [Accepted: 12/14/2020] [Indexed: 11/17/2022] Open
Abstract
Crystalline organic nanoparticles and their amorphous equivalents (ONP) have the potential to become a next-generation formulation technology for dissolution-rate limited biopharmaceutical classification system (BCS) class IIa molecules if the following requisites are met: (i) a quantitative understanding of the bioavailability enhancement benefit versus established formulation technologies and a reliable track record of successful case studies are available; (ii) efficient experimentation workflows with a minimum amount of active ingredient and a high degree of digitalization via, e.g., automation and computer-based experimentation planning are implemented; (iii) the scalability of the nanoparticle-based oral delivery formulation technology from the lab to manufacturing is ensured. Modeling and simulation approaches informed by the pharmaceutical material science paradigm can help to meet these requisites, especially if the entire value chain from formulation to oral delivery is covered. Any comprehensive digitalization of drug formulation requires combining pharmaceutical materials science with the adequate formulation and process technologies on the one hand and quantitative pharmacokinetics and drug administration dynamics in the human body on the other hand. Models for the technical realization of the drug production and the distribution of the pharmaceutical compound in the human body are coupled via the central objective, namely bioavailability. The underlying challenges can only be addressed by hierarchical approaches for property and process design. The tools for multiscale modeling of the here-considered particle processes (e.g., by coupled computational fluid dynamics, population balance models, Noyes–Whitney dissolution kinetics) and physiologically based absorption modeling are available. Significant advances are being made in enhancing the bioavailability of hydrophobic compounds by applying innovative solutions. As examples, the predictive modeling of anti-solvent precipitation is presented, and options for the model development of comminution processes are discussed.
Collapse
|
102
|
Berkowitz RD, Mack RJ, McCallum SW. Meloxicam for intravenous use: review of its clinical efficacy and safety for management of postoperative pain. Pain Manag 2020; 11:249-258. [PMID: 33291975 DOI: 10.2217/pmt-2020-0082] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Meloxicam for intravenous use (meloxicam iv.) is a nanocrystal formulation with improved dissolution properties and shortened time to peak plasma concentrations versus oral meloxicam. In Phase III and IIIb trials, 30 mg once daily relieved pain following pre- or postoperative administration in orthopedic, abdominal and colorectal surgeries. Meloxicam iv. was associated with reduced opioid consumption, the clinical benefit of which remains unclear. The drug may be administered alone or in combination with other non-nonsteroidal anti-inflammatory drugs. In Phase III trials, it demonstrated adverse event profile similar to placebo, with nausea, constipation, vomiting and headache occurring most frequently. Meloxicam iv. does not appear to adversely affect platelet function or wound-healing parameters. No new safety signals were detected in the Phase IIIb studies.
Collapse
|
103
|
Sharp CG, Leach ADP, Macdonald JE. Tolman's Electronic Parameter of the Ligand Predicts Phase in the Cation Exchange to CuFeS 2Nanoparticles. NANO LETTERS 2020; 20:8556-8562. [PMID: 32960614 DOI: 10.1021/acs.nanolett.0c03122] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
The metastable and thermodynamically favored phases of CuFeS2 are shown to be alternatively synthesized during partial cation exchange of hexagonal Cu2S using various phosphorus-containing ligands. Transmission electron microscopy and energy dispersive spectroscopy mapping confirm the retention of the particle morphology and the approximate CuFeS2 stoichiometry. Powder X-ray diffraction patterns and refinements indicate that the resulting phase mixtures of metastable wurtzite-like CuFeS2 versus tetragonal chalcopyrite are correlated with the Tolman electronic parameter of the tertiary phosphorus-based ligand used during the cation exchange. Strong L-type donors lead to the chalcopyrite phase and weak donors to the wurtzite-like phase. To our knowledge, this is the first demonstration of phase control in nanoparticle synthesis using solely L-type donors.
Collapse
|
104
|
Dahlman CJ, Venkatesan NR, Corona PT, Kennard RM, Mao L, Smith NC, Zhang J, Seshadri R, Helgeson ME, Chabinyc ML. Structural Evolution of Layered Hybrid Lead Iodide Perovskites in Colloidal Dispersions. ACS NANO 2020; 14:11294-11308. [PMID: 32830961 DOI: 10.1021/acsnano.0c03219] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/20/2023]
Abstract
Controlling the structure of layered hybrid metal halide perovskites, such as the Ruddlesden-Popper (R-P) phases, is challenging because of their tendency to form mixtures of varying composition. Colloidal growth techniques, such as antisolvent precipitation, form dispersions with properties that match bulk layered R-P phases, but controlling the composition of these particles remains challenging. Here, we explore the microstructure of particles of R-P phases of methylammonium lead iodide prepared by antisolvent precipitation from ternary mixtures of alkylammonium cations, where one cation can form perovskite phases (CH3NH3+) and the other two promote layered structures as spacers (e.g., C4H9NH3+ and C12H25NH3+). We determine that alkylammonium spacers pack with constant methylene density in the R-P interlayer and exclude interlayer solvent in dispersed colloids, regardless of length or branching. Using this result, we illustrate how the competition between cations that act as spacers between layers, or as grain-terminating ligands, determines the colloidal microstructure of layered R-P crystallites in solution. Optical measurements reveal that quantum well dimensions can be tuned by engineering the ternary cation composition. Transmission synchrotron wide-angle X-ray scattering and small-angle neutron scattering reveal changes in the structure of colloids in solvent and after deposition into thin films. In particular, we find that spacers can alloy between R-P layers if they share common steric arrangements, but tend to segregate into polydisperse R-P phases if they do not mix. This study provides a framework to compare the microstructure of colloidal layered perovskites and suggests clear avenues to control phase and colloidal morphology.
Collapse
|
105
|
Liang J, Zhu L, Chen S, Priest C, Liu X, Wang HL, Wu G, Li Q. Defect-Rich Copper-doped Ruthenium Hollow Nanoparticles for Efficient Hydrogen Evolution Electrocatalysis in Alkaline Electrolyte. Chem Asian J 2020; 15:2868-2872. [PMID: 32725801 DOI: 10.1002/asia.202000695] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/13/2020] [Revised: 07/26/2020] [Indexed: 11/08/2022]
Abstract
It is of great importance to develop highly efficient and stable Pt-free catalysts for electrochemical hydrogen generation from water electrolysis. Here, monodisperse 7.5 nm copper-doped ruthenium hollow nanoparticles (NPs) with abundant defects and amorphous/crystalline hetero-phases were prepared and employed as efficient hydrogen evolution electrocatalysts in alkaline electrolyte. Specifically, these NPs only require a low overpotential of 25 mV to achieve a current density of 10 mA cm-2 in 1.0 M KOH and show acceptable stability after 2000 potential cycles, which represents one of the best Ru-based electrocatalysts for hydrogen evolution. Mechanism analysis indicates that Cu incorporation can modify the electronic structure of Ru shell, thereby optimizing the energy barrier for water adsorption and dissociation processes or H adsorption/desorption. Cu doping paired with the defect-rich and highly open hollow structure of the NPs greatly enhances hydrogen evolution activity.
Collapse
|
106
|
Ti nO 2n-1 Suboxide Phases in TiO 2/C Nanocomposites Engineered by Non-hydrolytic Sol-Gel with Enhanced Electrocatalytic Properties. NANOMATERIALS 2020; 10:nano10091789. [PMID: 32916888 PMCID: PMC7559274 DOI: 10.3390/nano10091789] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/28/2020] [Revised: 08/28/2020] [Accepted: 09/03/2020] [Indexed: 01/06/2023]
Abstract
We report a non-hydrolytic sol-gel (NHSG) route to engineer original mesoporous TinO2n-1@TiO2/C nanocomposites. The synthetic approach is straightforward, solvent-free, additive-free, and meets the challenge of atom economy, as it merely involves TiCl4 and THF in stoichiometric amounts. We found that these nanocomposites present enhanced electrocatalytic properties towards the oxygen reduction reaction (ORR) in 0.1 M KOH. We believe that these preliminary results will open a window of opportunity for the design of metal suboxides/carbon nanocomposites through NHSG routes.
Collapse
|
107
|
Lin W, Nie Q, Jiang XF, Jiang X, Wang K, Shui L, Priya S, Zhou G, Hu X. Synthesis of Perovskite Nanocrystals and Their Photon-Emission Application in Conjunction With Liquid Crystals. Front Chem 2020; 8:574. [PMID: 32850620 PMCID: PMC7399476 DOI: 10.3389/fchem.2020.00574] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2020] [Accepted: 06/04/2020] [Indexed: 11/13/2022] Open
Abstract
Perovskite nanocrystals have attracted worldwide attention due to their outstanding optical versatility, high photoluminescence quantum yields, and facile synthesis. In this review, we firstly revisit the synthetic methods for perovskite nanocrystals (PNCs), including hot injection, anion exchange, solvothermal reaction, etc. In the meantime, we discuss effects of the different synthetic methods on the properties of PNCs, including the crystal size, emission spectral feature, quantum yield, etc., followed by several optimizing strategies. Finally, lasing and display applications of these PNCs in combination with liquid crystal materials are discussed thoroughly. Outlooks on the challenges and opportunities of these nanocrystalline materials in terms of adjunct applications with liquid crystals have been presented at the end, which are highly promising for next-generation light emission applications.
Collapse
|
108
|
Diego-Rucabado A, Candela MT, Aguado F, González J, Rodríguez F, Valiente R, Martín-Rodríguez R, Cano I. A Comparative Study on Luminescence Properties of Y 2O 3: Pr 3+ Nanocrystals Prepared by Different Synthesis Methods. NANOMATERIALS 2020; 10:nano10081574. [PMID: 32796602 PMCID: PMC7466516 DOI: 10.3390/nano10081574] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/17/2020] [Revised: 08/03/2020] [Accepted: 08/08/2020] [Indexed: 12/15/2022]
Abstract
Pr3+-doped Y2O3 nanocrystals (NCs) have been obtained via five wet-chemistry synthesis methods which were optimized in order to achieve superior optical properties. To this end, a systematic study on the influence of different reaction parameters was performed for each procedure. Specifically, precursor concentration, reaction temperature, calcination temperature, and time, among others, were analyzed. The synthesized Y2O3: Pr3+ NCs were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), and reflectance and Raman spectroscopy. In addition, the optical properties of such NCs were investigated by excitation, emission, and luminescence decay measurements. Concretely, emission from the 1D2 level was detected in all samples, while emission from 3PJ was absent. Finally, the effect of the synthesis methods and the reaction conditions on the luminescence decay has been discussed, and a comparative study of the different methods using the fluorescence lifetime of so-obtained Y2O3: Pr3+ NCs as a figure of merit has been carried out.
Collapse
|
109
|
Yang W, Vansuch GE, Liu Y, Jin T, Liu Q, Ge A, Sanchez MLK, K Haja D, Adams MWW, Dyer RB, Lian T. Surface-Ligand "Liquid" to "Crystalline" Phase Transition Modulates the Solar H 2 Production Quantum Efficiency of CdS Nanorod/Mediator/Hydrogenase Assemblies. ACS APPLIED MATERIALS & INTERFACES 2020; 12:35614-35625. [PMID: 32662974 DOI: 10.1021/acsami.0c07820] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
This study reports how the length of capping ligands on a nanocrystal surface affects its interfacial electron transfer (ET) with surrounding molecular electron acceptors, and consequently, impact the H2 production of a biotic-abiotic hybrid artificial photosynthetic system. Specifically, we study how the H2 production efficiency of a hybrid system, combining CdS nanorods (NRs), [NiFe] hydrogenase, and redox mediators (propyl-bridged 2,2'-bipyridinium, PDQ2+), depends on the alkyl chain length of mercaptocarboxylate ligands on the NR surface. We observe a minor decrease of the quantum yield for H2 production from 54 ± 6 to 43 ± 2% when varying the number of methylene units in the ligands from 2 to 7. In contrast, an abrupt decrease of the yield was observed from 43 ± 2 to 4 ± 1% when further increasing n from 7 to 11. ET studies reveal that the intrinsic ET rates from the NRs to the electron acceptor PDQ2+ are all within 108-109 s-1 regardless of the length of the capping ligands. However, the number of adsorbed PDQ2+ molecules on NR surfaces decreases dramatically when n ≥ 10, with the saturating number changing from 45 ± 5 to 0.3 ± 0.1 for n = 2 and 11, respectively. These results are not consistent with the commonly perceived exponential dependence of ET rates on the ligand length. Instead, they can be explained by the change of the accessibility of NR surfaces to electron acceptors from a disordered "liquid" phase at n < 7 to a more ordered "crystalline" phases at n > ∼7. These results highlight that the order of capping ligands is an important design parameter for further constructing nanocrystal/molecular assemblies in broad nanocrystal-based applications.
Collapse
|
110
|
Chen J, Liu F, Li Y, Dou Y, Liu S, Xiao L. Self-standing zeolite foam monoliths with hierarchical micro-meso-macroporous structures. ROYAL SOCIETY OPEN SCIENCE 2020; 7:200981. [PMID: 32968534 PMCID: PMC7481723 DOI: 10.1098/rsos.200981] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/10/2020] [Accepted: 07/14/2020] [Indexed: 06/11/2023]
Abstract
The zeolite monoliths were synthesized by a facile polymer scaffold template assisted hydrothermal method. The selected foam-shaped template of a polyurethane (PU) foam monolith, was used to prepare the self-standing zeolite foam (ZF) monolithic materials. The obtained ZF products can preserve the same size, shape and macroporous network structure of the original PU foam scaffold template, although the zeolite nano-crystallites had been fully substituted for the PU template to form the new skeleton struts and walls. The as-synthesized ZF products demonstrated abundant hierarchical porosity (involving triple micro-, meso- and macropores). Meanwhile, compared with the conventional zeolite powders, the self-standing ZF monolithic materials exhibited greater total pore volume and nearly three times higher mesopore volume, suggesting wider applications as catalysts, catalyst supports and adsorbents in industry.
Collapse
|
111
|
Le P, Vaidya R, Smith LD, Han Z, Zahid MU, Winter J, Sarkar S, Chung HJ, Perez-Pinera P, Selvin PR, Smith AM. Optimizing Quantum Dot Probe Size for Single-Receptor Imaging. ACS NANO 2020; 14:8343-8358. [PMID: 32525656 PMCID: PMC7872344 DOI: 10.1021/acsnano.0c02390] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
Quantum dots (QDs) are nanocrystals with bright fluorescence and long-term photostability, attributes particularly beneficial for single-molecule imaging and molecular counting in the life sciences. The size of a QD nanocrystal determines its physicochemical and photophysical properties, both of which dictate the success of imaging applications. Larger nanocrystals typically have better optical properties, with higher brightness, red-shifted emission, reduced blinking, and greater stability. However, larger nanocrystals introduce molecular-labeling biases due to steric hindrance and nonspecific binding. Here, we systematically analyze the impact of nanocrystal size on receptor labeling in live and fixed cells. We designed three (core)shell QDs with red emission (600-700 nm) and crystalline sizes of 3.2, 5.5, and 8.3 nm. After coating with the same multidentate polymer, hydrodynamic sizes were 9.2 nm (QD9.2), 13.3 nm (QD13.3), and 17.4 nm (QD17.4), respectively. The QDs were conjugated to streptavidin and applied as probes for biotinylated neurotransmitter receptors. QD9.2 exhibited the highest labeling specificity for receptors in the narrow synaptic cleft (∼20-30 nm) in living neurons. However, for dense receptor labeling for molecular counting in live and fixed HeLa cells, QD13.3 yielded the highest counts. Nonspecific binding rose sharply for hydrodynamic sizes larger than 13.3 nm, with QD17.4 exhibiting particularly diminished specificity. Our comparisons further highlight needs to continue engineering the smallest QDs to increase single-molecule intensity, suppress blinking frequency, and inhibit nonspecific labeling in fixed and permeabilized cells. These results lay a foundation for designing QD probes with further reduced sizes to achieve unbiased labeling for quantitative and single-molecule imaging.
Collapse
|
112
|
Sun XY, Chen JY, Rao CY, Ouyang JM. Size-Dependent Cytotoxicity of Hydroxyapatite Crystals on Renal Epithelial Cells. Int J Nanomedicine 2020; 15:5043-5060. [PMID: 32764935 PMCID: PMC7369374 DOI: 10.2147/ijn.s232926] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2019] [Accepted: 06/09/2020] [Indexed: 12/05/2022] Open
Abstract
Background Hydroxyapatite (HAP) is a common component of most idiopathic calcium oxalate (CaOx) stones and is often used as a nidus to induce the formation of CaOx kidney stones. Methods This work comparatively studies the cytotoxicity of four kinds of HAP crystals with different sizes (40 nm to 2 μm), namely, HAP-40 nm, HAP-70 nm, HAP-1 μm, and HAP-2 μm, on human renal proximal tubular epithelial cells (HK-2). Results HAP crystals reduce the viability and membrane integrity of HK-2 cells in a concentration-dependent manner and consequently cause cytoskeleton damage, cell swelling, increased intracellular reactive oxygen species level, decreased mitochondrial membrane potential, increased intracellular calcium concentration, blocked cell cycle and stagnation in G0/G1 phase, and increased cell necrosis rate. HAP toxicity to HK-2 cells increases with a decrease in crystal size. Conclusion Cell damage caused by HAP crystals increases the risk of kidney stone formation.
Collapse
|
113
|
Jiang Y, Pan Y, Wu W, Luo K, Rong Z, Xie S, Zuo W, Yu J, Zhang R, Qin D, Xu W, Wang D, Hou L. Hole Transfer Layer Engineering for CdTe Nanocrystal Photovoltaics with Improved Efficiency. NANOMATERIALS 2020; 10:nano10071348. [PMID: 32664220 PMCID: PMC7407640 DOI: 10.3390/nano10071348] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/17/2020] [Revised: 06/28/2020] [Accepted: 07/04/2020] [Indexed: 11/17/2022]
Abstract
Interface engineering has led to significant progress in solution-processed CdTe nanocrystal (NC) solar cells in recent years. High performance solar cells can be fabricated by introducing a hole transfer layer (HTL) between CdTe and a back contact electrode to reduce carrier recombination by forming interfacial dipole effect at the interface. Here, we report the usage of a commercial product 2,2′,7,7′-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (Spiro) as a hole transfer layer to facilitate the hole collecting for CdTe nanocrystal solar cells. It is found that heat treatment on the hole transfer layer has significant influence on the NC solar cells performance. The Jsc, Voc, and power conversion efficiency (PCE) of NC solar cells are simultaneously increased due to the decreased contact resistance and enhanced built-in electric field. We demonstrate solar cells that achieve a high PCE of 8.34% for solution-processed CdTe NC solar cells with an inverted structure by further optimizing the HTL annealing temperature, which is among the highest value in CdTe NC solar cells with the inverted structure.
Collapse
|
114
|
Revealing the structure of a catalytic combustion active-site ensemble combining uniform nanocrystal catalysts and theory insights. Proc Natl Acad Sci U S A 2020; 117:14721-14729. [PMID: 32554500 DOI: 10.1073/pnas.2002342117] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022] Open
Abstract
Supported metal catalysts are extensively used in industrial and environmental applications. To improve their performance, it is crucial to identify the most active sites. This identification is, however, made challenging by the presence of a large number of potential surface structures that complicate such an assignment. Often, the active site is formed by an ensemble of atoms, thus introducing further complications in its identification. Being able to produce uniform structures and identify the ones that are responsible for the catalyst performance is a crucial goal. In this work, we utilize a combination of uniform Pd/Pt nanocrystal catalysts and theory to reveal the catalytic active-site ensemble in highly active propene combustion materials. Using colloidal chemistry to exquisitely control nanoparticle size, we find that intrinsic rates for propene combustion in the presence of water increase monotonically with particle size on Pt-rich catalysts, suggesting that the reaction is structure dependent. We also reveal that water has a near-zero or mildly positive reaction rate order over Pd/Pt catalysts. Theory insights allow us to determine that the interaction of water with extended terraces present in large particles leads to the formation of step sites on metallic surfaces. These specific step-edge sites are responsible for the efficient combustion of propene at low temperature. This work reveals an elusive geometric ensemble, thus clearly identifying the active site in alkene combustion catalysts. These insights demonstrate how the combination of uniform catalysts and theory can provide a much deeper understanding of active-site geometry for many applications.
Collapse
|
115
|
Chen Q, Thimsen E. Highly Conductive Sb-SnO 2 Nanocrystals Synthesized by Dual Nonthermal Plasmas. ACS APPLIED MATERIALS & INTERFACES 2020; 12:25168-25177. [PMID: 32393020 DOI: 10.1021/acsami.0c05039] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Nonthermal plasma synthesis of transparent conducting oxide nanocrystals can offer advantages, for example, ligand-free surfaces, over traditionally used colloidal synthesis methods. When it comes to multicomponent (doped) metal oxide nanocrystal synthesis, uniform distribution of different metal elements and suppressing surface segregation of secondary resistive phases have been concerns. Specifically, surface segregation of resistive secondary phases reduces the electrical conductivity of nanocrystal assemblies. In this work, we demonstrate a nonthermal dual-plasma synthesis method capable of forming Sb-SnO2 (ATO) nanocrystals with a uniform composition distribution and apparently insignificant surface segregation of the dopant. A drastic increase in conductivity was observed in ATO thin films comprised of nanocrystals formed using a dual-plasma configuration compared to nanocrystals formed using a single-plasma configuration. The conductivity values of as-deposited porous films comprised of ATO nanocrystals, prepared using the dual-plasma approach, were on the order of 0.1 S cm-1, which to our knowledge is the highest conductivity reported to-date for that type of high surface area material. Annealing the films comprised of ATO nanocrystals at 500 °C for 2 h in air increased the conductivity and improved ambient stability, without significantly affecting the crystallite size.
Collapse
|
116
|
Recent advances in long-acting nanoformulations for delivery of antiretroviral drugs. J Control Release 2020; 324:379-404. [PMID: 32461114 DOI: 10.1016/j.jconrel.2020.05.022] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2020] [Revised: 05/14/2020] [Accepted: 05/15/2020] [Indexed: 02/07/2023]
Abstract
In spite of introduction of combination antiretroviral therapy (cART) against human immunodeficiency virus (HIV) infection; inaccessibility and poor adherence to oral cART costs 10 in 100,000 death worldwide. Failure in adherence leads to viral rebound, emergence of drug resistance and anticipated HIV infection in high risk individuals. Various Long-acting antiretroviral (LA ARV) nanoformulations including nano-prodrug, solid drug nanoparticles (SDN), nanocrystals, aspherical nanoparticles, polymeric and lipidic nanoparticles have shown plasma/tissue drug concentration in the therapeutic range for several weeks during pre-clinical evaluation. LA ARV nanoformulations therefore have replaced cART as better alternative for the treatment of HIV infection. Cabenuva™ is recently approved by Health Canada containing LA cabotegravir+LA rilpivirine nanocrystals (ViiV healthcare) for once monthly administration by intramuscular route. The LA nanoformulation due to its nanosize insist on better stability, delivery to lymphatic, slow release into systemic circulation via lymphatic-circulatory system conjoint and secondary drug depot within infiltered immune cells at site of administration and systemic circulation in contrast to conventional drugs. However, the pharmacokinetic, biodistribution and efficacy of LA nanoformulations hinge onto physicochemical properties of the drugs and route of administration. Therefore, current review emphasizes on these contradistinctive factors that affects the reproducibility, safety, efficacy and toxicity of LA anti-HIV nanoformulations. Moreover, it expatiates on application of profuse nanoformulations for long-acting effect with promising preclinical discoveries and two clinical leads. To add on, utilization of physiology-based and mechanism-based pharmacokinetic modelling and in vivo animal models which could lead to enhanced safety and efficacy of LA ARV nanoformulations in humans have been included.
Collapse
|
117
|
Rastogi P, Chu A, Gréboval C, Qu J, Noumbé UN, Chee SS, Goyal M, Khalili A, Xu XZ, Cruguel H, Ithurria S, Gallas B, Dayen JF, Dudy L, Silly MG, Patriarche G, Degiron A, Vincent G, Lhuillier E. Pushing Absorption of Perovskite Nanocrystals into the Infrared. NANO LETTERS 2020; 20:3999-4006. [PMID: 32283029 DOI: 10.1021/acs.nanolett.0c01302] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
To date, defect-tolerance electronic structure of lead halide perovskite nanocrystals is limited to an optical feature in the visible range. Here, we demonstrate that IR sensitization of formamidinium lead iodine (FAPI) nanocrystal array can be obtained by its doping with PbS nanocrystals. In this hybrid array, absorption comes from the PbS nanocrystals while transport is driven by the perovskite which reduces the dark current compared to pristine PbS. In addition, we fabricate a field-effect transistor using a high capacitance ionic glass made of hybrid FAPI/PbS nanocrystal arrays. We show that the hybrid material has an n-type nature with an electron mobility of 2 × 10-3 cm2 V-1 s-1. However, the dark current reduction is mostly balanced by a loss of absorption. To overcome this limitation, we couple the FAPI/PbS hybrid to a guided mode resonator that can enhance the infrared light absorption.
Collapse
|
118
|
Kobiyama E, Tahara H, Sato R, Saruyama M, Teranishi T, Kanemitsu Y. Reduction of Optical Gain Threshold in CsPbI 3 Nanocrystals Achieved by Generation of Asymmetric Hot-Biexcitons. NANO LETTERS 2020; 20:3905-3910. [PMID: 32343589 DOI: 10.1021/acs.nanolett.0c01079] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Lead halide perovskite nanocrystals (NCs) are a class of promising light-emitting materials and have been considered as gain media in lasers. Strong exciton-exciton interactions in NCs cause an energy shift of the lowest optical transition and affect the optical gain threshold. Here, we clarify the dynamics of exciton-exciton interactions in highly photoexcited CsPbI3 NCs by double-pump transient absorption spectroscopy. This method provides control over the population of each excited state by varying the time interval between the two pump pulses. We find that the band-edge energy shift induced by the formation of asymmetric hot-biexcitons (comprising one ground-state exciton and one hot exciton) is smaller than that induced by hot excitons and hot biexcitons in the ensemble. We demonstrate that the generation of asymmetric hot-biexcitons reduces the optical gain threshold in the CsPbI3 NC ensemble.
Collapse
|
119
|
Cheng Z, Cao X, Xu X, Shen Q, Yu T, Jin J. Effect of Ultrasonic Surface Impact on the Fatigue Properties of Ti3Zr2Sn3Mo25Nb. MATERIALS 2020; 13:ma13092107. [PMID: 32370179 PMCID: PMC7254257 DOI: 10.3390/ma13092107] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/23/2020] [Revised: 04/22/2020] [Accepted: 04/29/2020] [Indexed: 12/05/2022]
Abstract
The effect of nano grain surface layer generated by ultrasonic impact on the fatigue behaviors of a titanium alloy Ti3Zr2Sn3Mo25Nb (TLM) was investigated. Three vibration strike-numbers of 24,000 times, 36,000 times and 48,000 times per unit are chosen to treat the surface of TLM specimens. Nanocrystals with an average size of 30 nm are generated. The dislocation motion plays an important role in the transformation of nanograins. Ultrasonic surface impact improves the mechanical properties of TLM, such as hardness, surface residual stress, tensile strength and fatigue strength. More vibration strike numbers will cause a higher enhancement. With a vibration strike number of 48,000 times per square millimeter the rotating-bending fatigue strength of TLM at 107 cycles is improved by 23.7%. All the fatigue cracks initiate from the surface of untreated specimens, while inner cracks appear after the fatigue life of 106 cycles with the ultrasonic surface impact. The crystal slip in the crack initiation zone is the main way of growth for microcracks. Crack cores are usually formed at the junction of crystals. The stress intensity factor of TLM titanium alloy is approximately 7.0 MPa·m1/2.
Collapse
|
120
|
Cheng G, Liu Y, Chen T, Chen W, Fang Z, Zhang J, Ding L, Li X, Shi T, Xiao Z. Efficient All-Inorganic Perovskite Light-Emitting Diodes with Improved Operation Stability. ACS APPLIED MATERIALS & INTERFACES 2020; 12:18084-18090. [PMID: 32204590 DOI: 10.1021/acsami.9b23170] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Stability is becoming a main issue for perovskite light-emitting diodes (PeLEDs), as their external quantum efficiency (EQE) has been boosted to above 20%. An all-inorganic perovskite, cesium lead iodide (CsPbI3), has better stability than organic-inorganic hybrid perovskites but suffers from a transition to yellow δ-CsPbI3 phase at room temperature. Herein, we report stabilization of the α-CsPbI3 phase by in situ formation of perovskite nanocrystals (NCs). By incorporation of a proper ratio of bulky organoammonium halides, 4-fluoro-phenylmethylammonium iodide (4-F-PMAI), stable α-CsPbI3 films with nanometer-sized crystals can be obtained using a one-step spin-coating approach. The PeLEDs using α-CsPbI3 NC films as emitters show a pure red emission at 692 nm and a high EQE of 14.8%. The EQE is further boosted to 18.6% using CsPbI2.8Br0.2 as the emissive layer. Furthermore, the PeLEDs show a very decent half-lifetime of over 1200 min and a shelf stability of over 2 months, much longer than that of hybrid PeLEDs.
Collapse
|
121
|
Malkinson G, Mahou P, Chaudan É, Gacoin T, Sonay AY, Pantazis P, Beaurepaire E, Supatto W. Fast In Vivo Imaging of SHG Nanoprobes with Multiphoton Light-Sheet Microscopy. ACS PHOTONICS 2020; 7:1036-1049. [PMID: 33335947 PMCID: PMC7735018 DOI: 10.1021/acsphotonics.9b01749] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/11/2019] [Indexed: 05/05/2023]
Abstract
Two-photon light-sheet microscopy (2P-SPIM) provides a unique combination of advantages for fast and deep fluorescence imaging in live tissues. Detecting coherent signals such as second-harmonic generation (SHG) in 2P-SPIM in addition to fluorescence would open further imaging opportunities. However, light-sheet microscopy involves an orthogonal configuration of illumination and detection that questions the ability to detect coherent signals. Indeed, coherent scattering from micron-sized structures occurs predominantly along the illumination beam. By contrast, point-like sources such as SHG nanocrystals can efficiently scatter light in multiple directions and be detected using the orthogonal geometry of a light-sheet microscope. This study investigates the suitability of SHG light-sheet microscopy (SHG-SPIM) for fast imaging of SHG nanoprobes. Parameters that govern the detection efficiency of KTiOPO4 and BaTiO3 nanocrystals using SHG-SPIM are investigated theoretically and experimentally. The effects of incident polarization, detection numerical aperture, nanocrystal rotational motion, and second-order susceptibility tensor symmetries on the detectability of SHG nanoprobes in this specific geometry are clarified. Guidelines for optimizing SHG-SPIM imaging are established, enabling fast in vivo light-sheet imaging combining SHG and two-photon excited fluorescence. Finally, microangiography was achieved in live zebrafish embryos by SHG imaging at up to 180 frames per second and single-particle tracking of SHG nanoprobes in the blood flow.
Collapse
|
122
|
Ishibe T, Maeda Y, Terada T, Naruse N, Mera Y, Kobayashi E, Nakamura Y. Resistive switching memory performance in oxide hetero- nanocrystals with well-controlled interfaces. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS 2020; 21:195-204. [PMID: 32284769 PMCID: PMC7144302 DOI: 10.1080/14686996.2020.1736948] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/31/2019] [Revised: 02/28/2020] [Accepted: 02/28/2020] [Indexed: 05/28/2023]
Abstract
For realization of new informative systems, the memristor working like synapse has drawn much attention. We developed isolated high-density Fe3O4 nanocrystals on Ge nuclei/Si with uniform and high resistive switching performance using low-temperature growth. The Fe3O4 nanocrystals on Ge nuclei had a well-controlled interface (Fe3O4/GeOx/Ge) composed of high-crystallinity Fe3O4 and high-quality GeOx layers. The nanocrystals showed uniform resistive switching characteristics (high switching probability of ~90%) and relatively high Off/On resistance ratio (~58). The high-quality interface enables electric field application to Fe3O4 and GeOx near the interface, which leads to effective positively charged oxygen vacancy movement, resulting in high-performance resistive switching. Furthermore, we successfully observed memory effect in nanocrystals with well-controlled interface. The experimental confirmation of the memory effect existence even in ultrasmall nanocrystals is significant for realizing non-volatile nanocrystal memory leading to neuromorphic devices.
Collapse
|
123
|
Kim MG, Jeong J, Choi Y, Park J, Park E, Cheon CH, Kim NK, Min BK, Kim W. Synthesis of V-doped In 2O 3 Nanocrystals via Digestive-Ripening Process and Their Electrocatalytic Properties in CO 2 Reduction Reaction. ACS APPLIED MATERIALS & INTERFACES 2020; 12:11890-11897. [PMID: 31967458 DOI: 10.1021/acsami.9b19584] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
The development of synthetic methods for monodisperse nanomaterial is of great importance in science and technology related to nanomaterials. The strong demands to prepare exceptionally monodisperse nanocrystals have made digestive-ripening one of the most sought-after size-focusing processes. Although digestive-ripening processes have been demonstrated to produce various metals and semiconductors, their applicability to oxides has rarely been studied despite various unique properties and applications of oxide nanomaterials. In this work, we demonstrate the successful synthesis of monodisperse V-doped In2O3 nanocrystals via a modified digestive-ripening process. The nanocrystals have truncated octahedral shape faceted with eight (222) and six (220) planes. To the best of our knowledge, this is the first report on the digestive-ripening synthesis of highly symmetrical doped oxide nanocrystals. Moreover, V-doped In2O3 nanocrystals exhibit electrocatalytic activities for CO2 electrochemical reduction and produce CH3OH, which has not been attainable from previously reported electrocatalysts based on indium or indium oxide. This distinctive catalytic property of V-doped In2O3 is attributed to the presence of V-dopants in the In2O3 host. Our demonstration has important implications for both nanocrystal synthesis and electrocatalyst development.
Collapse
|
124
|
Utterback JK, Ruzicka JL, Keller HR, Pellows LM, Dukovic G. Electron Transfer from Semiconductor Nanocrystals to Redox Enzymes. Annu Rev Phys Chem 2020; 71:335-359. [PMID: 32074472 DOI: 10.1146/annurev-physchem-050317-014232] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
This review summarizes progress in understanding electron transfer from photoexcited nanocrystals to redox enzymes. The combination of the light-harvesting properties of nanocrystals and the catalytic properties of redox enzymes has emerged as a versatile platform to drive a variety of enzyme-catalyzed reactions with light. Transfer of a photoexcited charge from a nanocrystal to an enzyme is a critical first step for these reactions. This process has been studied in depth in systems that combine Cd-chalcogenide nanocrystals with hydrogenases. The two components can be assembled in close proximity to enable direct interfacial electron transfer or integrated with redox mediators to transport charges. Time-resolved spectroscopy and kinetic modeling have been used to measure the rates and efficiencies of the electron transfer. Electron transfer has been described within the framework of Marcus theory, providing insights into the factors that can be used to control the photochemical activity of these biohybrid systems. The range of potential applications and reactions that can be achieved using nanocrystal-enzyme systems is expanding, and numerous fundamental and practical questions remain to be addressed.
Collapse
|
125
|
Veronese A, Patrini M, Bajoni D, Ciarrocchi C, Quadrelli P, Malavasi L. Highly Tunable Emission by Halide Engineering in Lead-Free Perovskite-Derivative Nanocrystals: The Cs 2SnX 6 (X = Cl, Br, Br/I, I) System. Front Chem 2020; 8:35. [PMID: 32083055 PMCID: PMC7004971 DOI: 10.3389/fchem.2020.00035] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2019] [Accepted: 01/13/2020] [Indexed: 11/13/2022] Open
Abstract
Nanocrystals of Cs2SnX6 (X = Cl, Br, Br0.5I0.5, and I) have been prepared by a simple, optimized, hot-injection method, reporting for the first time the synthesis of Cs2SnCl6, Cs2SnBr6, and mixed Cs2Sn(I0.5Br0.5)6 nanocrystalline samples. They all show a cubic crystal structure with a linear scaling of lattice parameter by changing the halide size. The prepared nanocrystals have spherical shape with average size from 3 to 6 nm depending on the nature of the halide and span an emission range from 444 nm (Cs2SnCl6) to 790 nm (Cs2SnI6) with a further modulation provided by mixed Br/I systems.
Collapse
|