Mine clearance injuries in South Croatia

OBJECTIVE

The purpose of this retrospective study was to describe and analyze casualties in mine-clearance operations in South Croatia from 1991 to 1995. During the war in Croatia, the laying of mines by both sides was largely unplanned, without mapping or documentation, making demining, an already expensive, complicated task, even more dangerous.

METHODS

The study comprised all those injured in mine-clearance operations treated at Clinical Hospital Split. The type of mines used, the mechanism of the incident, and the location and severity of injury according to the Abbreviated Injury Scale and the Injury Severity Score were analyzed.

RESULTS

In a 5-year period, 160 pyrotechnicians of the Croatian Army performed demining in Southern Croatia. In 29 incidents, 53 deminers were injured. The degree of injury according to the Abbreviated Injury Scale was 2.85 +/- 0.6 and Injury Severity Score grade was 19.68 +/- 8.57. Two of the injured died.

CONCLUSION

To find and remove approximately 2 million mines laid in Croatia will take at least 10 years and 2,000 to 3,000 specialized personnel. Unfortunately, the results of the study demonstrate that a significant number of deminers will suffer grave injuries or die in the process.

(S)-Nitroxycarnitine nitrate production from (S)-carnitine by using acetic anhydride/nitric acid/acetic acid mixtures: safety assessment

The present work aims at assessing both thermodynamic and kinetic parameters of the esterification process of the (S)-carnitine, using calorimetric techniques. The use of the system acetic anhydride/nitric acid/acetic acid as esterifying agent and the explosive behaviour of nitric esters lead to safety considerations that have been investigated by hypothesizing some common process deviations. In particular, it has been investigated in adiabatic conditions both the batch addition of acetic anhydride and the effect of an initial temperature higher than those required by the process.

Investigations of the formation of explosive mixtures in dryers for coatings

In the following we will discuss a specific problem of explosion protection in dryers for coatings. It is mainly encountered in chamber dryers as these pose specific problems as regards occupational safety and health. During the drying process of most coatings, solvent vapours are released most of which can form explosive mixtures when a specific concentration, the lower explosion limit, is reached. The European Standard EN1539:2000 requires explosion venting areas for most of these dryers without adequate explosion protection measures such as appropriate limitation of the solvent input being taken into account. Different aspects of the model underlying the calculations are evaluated, and it will be shown that this model is still reliable in most applications. The investigations consisted of three parts. At first there have been made investigations of the operating conditions in different enterprises aimed to get information about specific parameters, problems and failures. Laboratory experiments have been made to investigate in detail the major influencing parameters. Attempts to set up a simple but basic physical model for the experimental data have also been made. Evaporation and diffusion have been examined. The numerical models have been kept as simple as possible to be a potential tool for designers/manufacturers and users.

Monte Carlo simulations to advance characterisation of landmines by pulsed fast/thermal neutron analysis

The performance of a detection system based on the pulsed fast/thermal neutron analysis technique was assessed using Monte Carlo simulations. The aim was to develop and implement simulation methods, to support and advance the data analysis techniques of the characteristic gamma-ray spectra, potentially leading to elemental characterisation of innocuous objects using the full spectrum analysis (FSA) approach. The simulations were carried out with a simplified tool, based on a 14MeV DT pulse-neutron source and a bismuth-germanate detector. A MCNP-based method for de-coupling the radiation transport in mixed (n,gamma) fields, to generate separate sets of standard detector gamma-ray responses for individual elements, is outlined. When normalised and experimentally benchmarked in terms of the pulse-neutron source production rate, the standard spectra can be incorporated into algorithms for the FSA of in situ measurements and elemental fingerprinting of the inspected object.

Detection of landmines by using 14MeV neutron tagged beams

A large-area scanning system using 14 MeV tagged neutrons has been built. The associated (4)He particles emitted in the D+T reaction are detected in an array of Parallel Plate Avalanche Counters that defines a scanning plane having about 10 x 100 cm(2) area. Coincident gamma-rays are detected by 10 BaF(2) scintillators. The capability of the system to determine the presence and the position of samples and to perform an on-line background subtraction is demonstrated. Test with landmines are also reported. This technique allows a significant improvement of the signal-to-noise ratio searching for hidden threat materials. The use with portable sealed-tube generators is foreseen.

Detection of buried explosives using portable neutron sources with nanosecond timing

Significant reduction of time needed to identify hidden explosives and other hazardous materials by the "neutron in, gamma out" method has been achieved by introducing timed (nanosecond) neutron sources-the so-called nanosecond neutron analysis technique. Prototype mobile device for explosives' detection based on a timed (nanosecond) isotopic (252)Cf neutron source has been created. The prototype is capable of identifying 400 g of hidden explosives in 10 min. Tests have been also made with a prototype device using timed (nanosecond) neutron source based on a portable D-T neutron generator with built-in segmented detector of accompanying alpha-particles. The presently achieved intensity of the neutron generator is 5x10(7)n/s into 4pi, with over 10(6) of these neutrons being correlated with alpha-particles detected by the built-in alpha-particle detector. Results of measurements with an anti-personnel landmine imitator are presented.

The status of the Delft University Neutron Backscatter Landmine Detector (DUNBLAD)

The neutron backscattering technique may be applied to search for non-metallic landmines in relatively dry soils. A detector system using this technique has been constructed. Tests showed that anti-tank mines can reliably be found, but that, depending on the circumstances, anti-personnel mines may escape detection. A first test with a pulsed neutron generator shows that further improvements can be achieved by applying a window on the neutron transit time.

Development of a thermal neutron sensor for Humanitarian Demining

A thermal neutron sensor prototype for Humanitarian Demining has been developed, trying to minimize cost and complexity of the system as required in such application. A (252)Cf source or a sealed-tube neutron generator is employed to produce primary fast neutrons that are thermalized in a moderator designed to optimize the neutron capture reaction yield in buried samples. A description of the sensor, including the performances of the acquisition system based on a Flash ADC card and final tests with explosive simulants are reported. A comparison of the sensor performance when using a radioactive source to that when employing a sealed-tube neutron generator is presented. Limitations and possible applications of this technique are discussed.

White phosphorus poisoning--explosive encounter

Poisoning by white or yellow phosphorus is reported in various forms and also in ages varying from infants to adults, but spontaneous combustion and explosion during its management has never been described. This incidence occurred while attempting to pass a Ryle's tube. Its free end first exhibited a yellow flame and this later on led to an explosive encounter. Role of static electricity generated while handling plastic materials leading to ignition and explosion cannot be overlooked.

Firework-related childhood injuries in Greece: a national problem

During a 5-year period, out of 110066 children with injuries recorded in the Greek Emergency Department Injury Surveillance System (EDISS), 91 had firework-related injuries. Descriptive analyses and the Barrell matrix were used to determine risk factors and extrapolated national firework childhood injury figures were calculated. The estimated annual incidence of childhood firework injuries treated in the emergency departments of hospitals countrywide, was 7 per 100000 children years. Seventy percent of injuries concerned older children (10-14 years), mostly boys with self-inflicted injuries, whereas girls suffered injuries as bystanders. A sharp peak in spring was noted, when the Greek Orthodox Easter is celebrated. Illicitly sold fireworks caused most injuries, but in eight instances homemade firecrackers were responsible.

Trace explosives detection by photoluminescence

Some field tests in counter-terrorism efforts to detect explosive traces employ chemistries that yield colored products. We have examined a test kit of this kind, ETK(Plus), based on widely used chemistries and employed extensively by the Israel Police. Our investigation focuses on the prospect of gaining sensitivity by replacing the normal colorimetric modality with photoluminescence detection, which, to our knowledge, has not been explored to date. We find two or more orders of magnitude sensitivity gains for all explosives studied, using field-worthy photoluminescence techniques. We have also investigated a general lanthanide-based photoluminescence approach which shows promise and the ability to photoluminescence-detect trace explosives in the presence of intense background color and/or background fluorescence by time-resolved imaging.

Chemiluminescence detection systems for the analysis of explosives

The objective of this paper is to provide a comprehensive review of explosive detection by chemiluminescence (CL) through a summary of the relevant literature in the last 5 years and a synopsis of current research topics and developments. The literature reviewed is specially addressed for the detection of a group of high explosives, containing nitrogen compounds. Most explosives compounds contain either nitro or nitrate groups which make possible their detection and quantification using detection systems based on chemiluminescent reactions. Practical considerations and experimental requirements are indicated, and the possibilities and limitations are evaluated.

Hydrocode simulations of air and water shocks for facility vulnerability assessments

Hydrocodes are widely used in the study of explosive systems but their use in routine facility vulnerability assessments has been limited due to the computational resources typically required. These requirements are due to the fact that the majority of hydrocodes have been developed primarily for the simulation of weapon-scale phenomena. It is not practical to use these same numerical frameworks on the large domains found in facility vulnerability studies. Here, a hydrocode formulated specifically for facility vulnerability assessments is reviewed. Techniques used to accurately represent the explosive source while maintaining computational efficiency are described. Submodels for addressing other issues found in typical terrorist attack scenarios are presented. In terrorist attack scenarios, loads produced by shocks play an important role in vulnerability. Due to the difference in the material properties of water and air and interface phenomena, there exists significant contrast in wave propagation phenomena in these two medium. These physical variations also require special attention be paid to the mathematical and numerical models used in the hydrocodes. Simulations for a variety of air and water shock scenarios are presented to validate the computational models used in the hydrocode and highlight the phenomenological issues.

14N magnetic resonance for materials detection in the field

Nitrogen is prevalent in many materials, both naturally occurring and man-made. In particular, it is found in many explosives and other contraband materials. One technique for the detection of such materials in the field is the use of the magnetic resonance signal from the nearly 100% abundant, spin-1, 14N nuclei. Some of the difficulties with such measurements in the field include spurious signals from acoustic resonances, radio-frequency interference, and generally low signal-to-noise ratios. A summary of recent work by the authors to help mitigate these difficulties is presented.

Do not get burned: preventing iatrogenic fires and burns in the emergency department

Burns are a common emergency in children but are rarely sustained in the emergency department. While iatrogenic burns in the operating room have been detailed in the medical literature, there is little or no information on iatrogenic burns in the emergency department. We present 2 cases of patients who sustained burns in the emergency department and review the most common mechanisms for this to happen. It is not always evident that certain procedures can cause unexpected burns to our patients. A survey of pediatric emergency medicine fellowship programs indicates that most programs have no training about these dangers. Recommendations are made to help prevent and control iatrogenic fires in the emergency department.

Safety considerations for sample analysis using a near-infrared (785 nm) Raman laser source

Raman spectroscopy is often considered a nondestructive analytical technique; however, this is not always the case. The 300-mW 785-nm near-infrared (NIR) laser source used with many commercially available instruments has sufficient power to burn samples. This destructive potential is of special concern if the sample is irreplaceable (e.g., fine art, forensic evidence, or for in vivo medical diagnostics) or a hazardous energetic material (explosive or pyrophoric samples). This study quantifies the heat resulting from illuminating an extensive color array with a 785-nm NIR laser and relates these values to the hazards associated with Raman analysis. In general, darker colors were found to be more problematic. Since visible colors are not ideally correlated with absorptive characteristics at 785 nm, predictions based on thermography are not perfect; however, this approximation gives a useful method for predicting the thermal response of unknown samples to NIR exposure. Additionally, experimental studies evaluated the analysis of flammable organic solvents, propellants, military explosives, mixtures containing military explosives, shock-sensitive explosives, and gunpowders (i.e., smokeless, black, and Pyrodex powders). Safety guidelines for analysis are presented.

Microchip capillary electrophoresis coupled with a boron-doped diamond electrode-based electrochemical detector

The attractive behavior and advantages of a diamond electrode detector for a micromachined capillary electrophoresis (CE) system are discussed. A chemically vapor-deposited boron-doped diamond (BDD) film band (0.3 x 6.0 mm) electrode is used for end-column amperomettic detection. The favorable performance of the diamond electrode microchip detector is indicated from comparison to a commonly used thick-film carbon detector. The diamond electrode offers enhanced sensitivity, lower noise levels, and sharper peaks for several groups of important anaytes (nitroaromatic explosives, organophosphate nerve agents, phenols). The favorable signal-to-background characteristics of the BDD-based CE detector are coupled with a greatly improved resistance to surface fouling and greater isolation from high separation voltages. The enhanced stability is indicated from a RSD of 0.8% for 60 repetitive measurements of 5 ppm 2,4,6-trinitrotoluene (vs RSD of 10.8% at the thick-film carbon electrode). A highly linear response is obtained for the explosives 1,3-dinitrobenzene and 2,4-dinitrotoluene over the 200-1,400 ppb range, with detection limits of 70 and 110 ppb, respectively. Factors influencing the performance of the BDD detector are assessed and optimized. The attractive properties of BDD make it very promising material for electrochemical detection in CE microchip systems and other micromachined flow analyzers.

Selective functionalisation of TNT for sensitive detection by SERRS

Selective chemical functionalisation of 2,4,6-trinitrotoluene to a surface enhanced resonance Raman active species for sensitive detection.