Effects of physiological environments on the hydration behavior of mineral trioxide aggregate

Utilizing scanning electron microscope, X-ray diffraction (XRD) and microhardness tests, we evaluated how various physiological environments affect the hydration behavior and physical properties of mineral trioxide aggregate (MTA). We found that the microstructure of hydrated MTA consists of cubic and needle-like crystals. The former comprised the principal structure of MTA, whereas the later were less prominent and formed in the inter-grain spaces between the cubic crystals. MTA samples were hydrated in distilled water, normal saline, pH 7, and pH 5. However, no needle-like crystals were observed in the pH 5 specimens, and erosion of the cubic crystal surfaces was noted. XRD indicated a peak corresponding to Portlandite, a hydration product of MTA, and the peak decreased noticeably in the pH 5 group. The pH 5 specimens' microhardness was also significantly weaker compared to the other three groups (p<0.0001). These findings suggest that physiological environmental effects on MTA formation are determined, in part, by environmental pH and the presence of ions. In particular, an acidic environment of pH 5 adversely affects both the physical properties and the hydration behavior of MTA.

In vivo flow cytometer for real-time detection and quantification of circulating cells

An in vivo flow cytometer is developed that allows the real-time detection and quantification of circulating fluorescently labeled cells in live animals. A signal from a cell population of interest is recorded as the cells pass through a slit of light focused across a blood vessel. Confocal detection of the excited fluorescence allows continuous monitoring of labeled cells in the upper layers of scattering tissue, such as the skin. The device is used to characterize the in vivo kinetics of red and white blood cells circulating in the vasculatúre of the mouse ear. Potential applications in biology and medicine are discussed.

Bond strengths of orthodontic bracket after acid-etched, Er:YAG laser-irradiated and combined treatment on enamel surface

Laser ablation has been proposed as an alternative method to acid etching: however, previous studies have obtained contrasting results. The purpose of this study was to compare the bond strengths after acid etching, laser ablation, acid etching followed by laser ablation, and laser ablation followed by acid etching. Forty specimens were randomly assigned to one of the four groups. Two more specimens in each group did not undergo bond test and were prepared for observation with scanning electron microscope (SEM) after the four kinds of surface treatment. After the bond test, all specimens were inspected under the digital stereomicroscope and SEM to record the bond failure mode. Student's t-test results showed that the mean bond strength (13.0 +/- 2.4 N) of the laser group was not significantly different from that of the acid-etched group (11.8 +/- 1.8 N) (P > .05). However, this strength was significantly higher than that of the acid-etched then laser-ablated group (10.4 +/- 1.4 N) or that of the laser-ablated then acid-etched group (9.1 +/- 1.8 N). The failure modes occurred predominantly at the bracket-resin interface. Er:YAG laser ablation consumed less time compared with the acid-etching technique. Therefore, Er:YAG laser ablation can be an alternative tool to conventional acid etching.

Repair of perforating internal resorption with mineral trioxide aggregate: a case report

A case of internal resorption with buccal perforation was found in a maxillary central incisor. Because of the extensive lesion and continuous exudation, surgical intervention was used. The apical third was obturated with gutta-percha, and the perforated lesion was repaired with mineral trioxide aggregate. The residual canal space was filled by thermoplasticized gutta-percha technique, and the coronal cavity was restored with composite resin. The symptoms and signs ceased, and the results were satisfactory at 1-year follow-up.

Cytotoxicity of conventional and modified glass ionomer cements

Various glass ionomer cements (GICs) and resin-modified GICs are widely used as tooth-colored restorative materials. However, their potential effects on pulp tissues are not fully understood. In this study, the authors compared the toxicity of nine types of GICs on cultured human dental pulp cells. Exposure of pulp cells to GICs for five days led to differential growth inhibition as analyzed by 3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyl-tetrazolium bromide (MTT) assay. Exposure of pulp cells to ProTec CEM, Fuji II LC, Compoglass and GC Lining cement for five days decreased the cell numbers to 11%, 12%, 19% and 25%, respectively, of the control. Exposure of pulp cells to Fuji IX, GIC FX and Fuji II SC also decreased cell numbers by 62%, 33% and 24%, respectively. By contrast, Hy-Bond and Fuji I showed only mild suppression on the growth of pulp cells, with 12% and 16% decreased cell numbers. Morphologically, marked retraction and rounding of pulp cells were noted following exposure to GC Lining cement; in addition, cell surface blebbing was noted following exposure to Compoglass, Fuji II LC and ProTec CEM. Exposure of the pulp cells to Fuji II SC and Fuji IX, however, led to decreases in the cell density, with no obvious morphological changes. These results indicate that resin-modified GICs, such as Compoglass, Fuji II LC, ProTec CEM and GC Lining cements, are more toxic to pulp cells than conventional GICs. It is not recommended that resin-modified GICs be directly applied onto dental pulp cells. However, additional in vivo studies are needed to evaluate the potential toxicities of these resin-modified GICs during clinical operative procedures.

Cytotoxicity of three dentin bonding agents on human dental pulp cells

OBJECTIVES

Dentin bonding agents (DBA) have been widely used in operative restoration to prevent leakage and promote bonding strength in the resin-dentin interface. However, DBA may exert potentially harmful effects to the dental pulp. In the present study, differential cytotoxicity of three DBA (Syntac Sprint, SP; Prime and Bond 2.1, PB; and Single Bond, SB) on the pulp cells was tested.

METHODS

Three DBA were diluted with the culture medium by a ratio of 1:1000, 1:2000 and 1:4000 (v/v). Pulp cells (5 x 10(4) cells/well) were then exposed to culture medium containing different diluents of three DBA for 12, 24h and 3 days. Cytotoxicity was measured with a modified 3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyl-tetrazolium bromide (MTT) assay.

RESULTS

A 12h experiment revealed that SP was the strongest cytotoxic agent, followed sequentially by SB and PB. Exposure of pulp cells to 1:4000 (v/v) dilution of SP, PB and SB for 24h reduced the cell number by 23, 6 and 45%, respectively. A 1:2000 (v/v) of DBA diluents reduced the cell number for 32, 13 and 65%, respectively, by SP, PB and SB. Dilution of DBA by 1000-fold of culture medium further enhanced the cytotoxic response. Cell number decreased by 89, 65 and 72%, respectively, by SP, PB and SB. Similar to the 12h-cytotoxicity data, SB is more toxic at high dilution condition, whereas, at low dilution condition, SP is the most toxic agent to pulp cells. Similar cytotoxicity was noted when pulp cells were exposed to DBA for 3 days. Toxicity of DBA was concomitant with marked retraction and rounding of dental pulp cells.

SIGNIFICANCE

These results indicate that DBA exerts potential harmful effects to the pulp. Differential toxic effects of DBA on the pulp cells should be considered during selection of a suitable DBA for operative restoration.

Transition element contained partial-stabilized cement (PSC) as a dental retrograde-filling material

A modified silicate cement has previously been developed as a dental retrograde filling; it has great sealing ability, good biocompatibility, and anti-bacterial properties. However, its clinical application is limited by a long setting time and poor handling property. In the present study, the setting time has been shortened by raising the preparation temperature of the cement and adding transition elements into the partial-stabilized cement (PSC) to increase the rate of hydration reaction of the cement. The rate of the hydration was evaluated by micro-hardness measurement. Phase transformation and micro-structure were examined by an X-ray diffractometer and a scanning electron microscope, respectively.When the preparation temperature increased (1400 degrees C), the phase content of Ca(2)SiO(5)(C(2)S) and Ca(3)SiO(6)(C(3)S) increased but the CaO decreased. The setting time was shortened and the micro-hardness increased because the increased amplitude of vibration of the atoms about their equilibrium resting positions increased by increasing the heating temperature. When the transition elements were added to PSC, crystal defects were effectively created and monoclinic structure of C(3)S was favored to form, which would increase the hydrated reaction of PSC and shorten the setting time. Co addition is the most effective due to its ability to create more defects and stabilize the monoclinic structure. The micro-hardness of the PSC with Co 5 wt% addition was about 66 in the Vickers scale. It also exhibited an early setting within 20 min. We believe that the modified PSC will have a great potential in its application to perforation repair and retrograde filling in endodontic surgery.

Scavenging property of three cresol isomers against H2O2, hypochlorite, superoxide and hydroxyl radicals

Formocresol has long been used for pulpotomy of primary teeth and as an intracanal medicament. Little is known, however, about the pharmacological effect of tricresols. This study showed that three cresol isomers, o-cresol, m-cresol and p-cresol, are H2O2 scavengers with a 50% inhibitory concentration (IC50) of 502, 6.7 and 10.16 microM, respectively. o-, m- and p-cresol were also shown to be effective scavengers of superoxide radicals generated by xanthine/xanthine oxidase with an IC50 of 282, 153 and > 4000 microM, respectively, as analyzed by luminometer. o-, m- and p-cresol showed protective effects on the DNA breaks generated by H2O2/FeCl2 and FeCl3/ascorbate/H2O2 systems at concentrations ranging from 70 microM to 1.43 mM, o-, m- and p-cresol also showed differential protective effects against DNA breaks induced by 0.17% NaOCl with 100% inhibitory concentration (IC100) of about 10, 1 and 10 mM, respectively. In addition, reaction with 3% H2O2 and 0.17% NaOCl completely prevented NaOCl-induced DNA breaks. The results indicate that the three cresol isomers are effective ROS scavengers and may prevent ROS induced damage when used as pulpotomy agents or as intracanal medicaments. Owing to the difference in the position of the functional hydroxyl group in the three cresol isomers, m-cresol is the most effective ROS scavenger. Concomitant use of H2O2 for root canal irrigation may diminish both the tissue dissolving capacity of NaOCl and NaOCl-induced DNA damage.

An in vitro study on restoring bond strength of a GIC to saliva contaminated enamel under unrinse condition

OBJECTIVES

This study attempted to find a method of restoring the tensile bond strength of glass ionomer cement (GIC) to saliva contaminated enamel under unrinse condition.

METHODS

One hundred and thirty human non-carious permanent teeth were divided into two major groups. Either treatment with air drying, acetone, polyacrylic acid, maleic acid, tartaric acid, Scotchbond primer or no treatment at all was applied to both clean and saliva contaminated enamel surfaces prior to GIC placement. Samples were debonded in tension after 7 days of storage in water using a universal testing machine. Statistical analysis was performed using one-way ANOVA, Tukey's studentized range test and Wilcoxon's rank sums test to determine the significance of the difference of tensile bond strengths within and between the two major groups.

RESULTS

Bond strength of GIC to clean enamel was 2.46+/-0.79 MPa while the bond strength of GIC to wet contaminated enamel was significantly reduced to 1.28+/-0.32 MPa (p<0.01). However, the bond strengths were restored when the contaminated enamel surfaces were air-dried (2.19+/-0.38 MPa) or applied with either maleic acid (2.80+/-0.63 MPa) or Scotchbond primer (2.13+/-0.65 MPa) before placing GIC over the enamels.

CONCLUSIONS

Air drying, or application of maleic acid or Scotchbond primer to the contaminated enamel without rinsing prior to GIC placement can restore the tensile bond strength to a level similar to that of non-contaminated control.

Cyclic fatigue of endodontic nickel titanium rotary instruments: static and dynamic tests

Endodontic instruments upon rotation are subjected to both tensile and compressive stress in curved canals. This stress is localized at the point of curvature. The purpose of this study was to evaluate the cyclic fatigue of 0.04 ProFile nickel titanium rotary instruments operating at different rotational speeds and varied distances of pecking motion in metal blocks that simulated curved canals. A total of 150 ProFile instruments were made to rotate freely in sloped metal blocks at speeds of 200, 300, or 400 rpm by a contra-angle handpiece mounted on an Instron machine. The electric motor and Instron machine were activated until the instruments were broken in two different modes, static and dynamic pecking-motion. The fractured surfaces of separated instruments were examined under a scanning electron microscope. All data obtained were analyzed by a stepwise multiple regression method using a 95% confidence interval. The results demonstrated that the time to failure significantly decreased as the angles of curvature or the rotational speeds increased. However, as pecking distances increased, the time to failure increased. This is because a longer pecking distance gives the instrument a longer time interval before it once again passes through the highest stress area. Microscopic evaluation indicated that ductile fracture was the major cyclic failure mode. To prevent breakage of a NiTi rotary instrument, appropriate rotational speeds and continuous pecking motion in the root canals are recommended.

Transoesophageal echocardiographic monitoring of pulmonary venous obstruction induced by sternotomy closure during infant heart transplantation

A case of an infant receiving orthotopic heart transplantation with over-sized donor heart was reported. Left lower pulmonary venous obstruction after sternotomy closure was detected by transoesophageal echocardiography (TOE) and the decision to delay sternal closure was made and the clinical outcome was very satisfactory. The usefulness of intraoperative TOE monitoring and postoperative TOE follow-up for infant heart transplantation, especially in those cases of size mismatch, was well demonstrated.

Validation of diffusion tensor magnetic resonance axonal fiber imaging with registered manganese-enhanced optic tracts

Noninvasive mapping of white matter tracts using diffusion tensor magnetic resonance imaging (DTMRI) is potentially useful in revealing anatomical connectivity in the human brain. However, a gold standard for validating DTMRI in defining axonal fiber orientation is still lacking. This study presents the first validation of the principal eigenvector of the diffusion tensor in defining axonal fiber orientation by superimposing DTMRI with manganese-enhanced MRI of optic tracts. A rat model was developed in which optic tracts were enhanced by manganese ions. Manganese ion (Mn(2+)) is a potent T1-shortening agent and can be uptaken and transported actively along the axon. Based on this property, we obtained enhanced optic tracts with a T1-weighted spin-echo sequence 10 h after intravitreal injection of Mn(2+). The images were compared with DTMRI acquired with exact spatial registration. Deviation angles between tangential vectors of the enhanced tracts and the principal eigenvectors of the diffusion tensor were then computed pixel by pixel. We found that under signal-to-noise (SNR) of 30, the variance of deviation angles was (13.27 degrees). In addition, the dependence of this variance on SNR obeys stochastic behavior if SNR is greater than 10. Based on this relation, we estimated that an rms deviation of less than 10 degrees could be achieved with DTMRI when SNR is 40 or greater. In conclusion, our method bypasses technical difficulties in conventional histological approach and provides an in vivo gold standard for validating DTMRI in mapping white matter tracts.

Petal-like apatite formed on the surface of tricalcium phosphate ceramic after soaking in distilled water

In the present study six types of tricalcium phosphate ceramic were prepared and soaked in distilled water for different periods to investigate whether a surface apatite layer was formed on TCP ceramics or not. X-ray diffractometry (XRD) and Fourier-transformed infrared (FTIR) spectrometer were used to examine the changes in crystalline phases and functional groups of TCP ceramics for different soaking periods. Calcium and phosphate ions released from TCP ceramics during soaking were recorded by atomic absorption analysis and ion-coupled plasma. Results revealed that alphaTCP, alphaTCP/betaTCP mixture (alphabetaTCP) and betaTCP ceramic were gradually dissolved. There was no apatite layer formed on their surface after being immersed in distilled water for different durations of time. Mg-TCP ceramic, tricalcium phosphate doped with Mg ions, exhibited a lower dissolution rate than the other types of TCP ceramics. Apatite crystals were also not formed on the surface of Mg-TCP ceramic when immersed in distilled water. Tribasic calcium phosphate, prepared from wet precipitation method, was converted to betaTCP/HAP (HbetaTCP) or alphaTCP/betaTCP/HAP (HalphabetaTCP) crystalline composition at different sintering temperatures (1,150 degrees C and 1,300 degrees C). The surface apatite layer did not appear on HbetaTCP ceramic after soaking. We observed that petal-like apatite was formed on the HalphabetaTCP ceramic surface after being immersed for 2 weeks. alphaTCP phase of HalphabetaTCP ceramic was not directly converted to apatite during soaking. The surface apatite layer formed on the HalphabetaTCP ceramic surface was due to the precipitation of the calcium and phosphate ions released from alphaTCP dissolution. HAP, which existed in the structure of HalphabetaTCP ceramic, plays a role as apatite-precipitating seed to uptake calcium and phosphate ions. TCP ceramics which lacked alphaTCP and HAP content neither converted to apatite nor formed surface apatite on their surfaces during immersion.

Sequential changes of gastric hyperplastic polyps following endoscopic ligation

BACKGROUND

Endoscopic ligation has been extensively applied in the management of esophageal and gastric varices with or without bleeding. The varices are automatically eradicated through the use of ligation. However, whether avascular necrosis will occur in a gastrointestinal polyp when the base is ligated remains unclear. The aims of this pilot study were to investigate the sequential changes of gastric hyperplastic polyps following endoscopic detachable snare ligation and to determine the possibility of induction of avascular necrosis in these lesions following ligation.

METHODS

Eleven patients with eighteen gastric hyperplastic polyps were treated with endoscopic detachable-snare ligation. The polyps were observed for 5 minutes and biopsies were then conducted. At 14 days after endoscopic ligation, follow-up endoscopies were performed to assess the outcome of the strangulated polyps.

RESULTS

After being strangulated by the detachable snares, a majority of the polyps immediately congested (94%), and then developed cyanotic change (89%) approximately 4 minutes later. Pathological examination revealed severe venous congestion in the lamina propria of the strangulated polyps. On follow-up endoscopy 2 weeks later, all the snares had dropped off, and avascular necrosis occurred in sixteen polyps (89%). All of the polyps with avascular necrosis were detected to have developed cyanotic changes in initial endoscopy. No complications occurred during or following the ligation procedure.

CONCLUSIONS

Most gastric hyperplastic polyps develop avascular necrosis following ligation by detachable snare. Cyanotic change is an important predictor of the outcomes of the lesions following endoscopic ligation. The application of this ligation technique in treatment of bleeding or non-bleeding gastrointestinal polyps deserves further investigation.

Induction of cellular toxicity in cultured porcine corneal keratocytes by endothelin-1

The effect of endothelin-1 (ET-1) on corneal cells is not well understood. We investigated the biochemical changes of cultured porcine corneal keratocytes under exposure to ET-1. The results indicate that ET-1 has remarkable effects to inhibit corneal keratocytes on 3H-thymidine, 3H-leucine, 3H-uridine uptakes and cellular migration. It is in a dose-dependent manner at concentrations ranging from 10(-7) M to 10(-9) M. The 50% inhibitory dose (ID50) for ET-1, as measured by 3H-thymidine uptake, 3H-uridine uptake and 3H-leucine uptake, were 10(-7) M, 10(-0.52) M and 10(-11.8) M, respectively. The dead and living cells were estimated with MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide) assay that was converted tetrazolium dye of living cells only into insoluble purple formazan crystals within mitochondria. In the presence of ET-1, the cellular MTT values were also decreased. The ID50 for ET-1 with cell migration assay and MTT assay were measured at 10(-7.86) M and 10(-5.1) M. Endothelin-1 (10(-6) M) promptly changed cellular morphology and attenuated adhesion observed with laser scanning cytometer. Endothelin-1-induced characteristic apoptosis cells were observed using a TUNEL assay that detected fragmented DNA of apoptosis. Western blot assay revealed that endothelin-1 induced proteolysis and decreased in fibronectin protein. These findings indicate that endothelin-1 may lead keratocytes to death resulting from induction of apoptosis and functional loss.

Laser-beam-triggered microcavitation: a novel method for selective cell destruction

We describe a new method of cell destruction that may have potential for use in antitumor therapy. Cells are loaded by phagocytosis with microparticles (<1 microm) and irradiated with short laser pulses. Absorption of laser energy by the microparticles causes localized vaporization of the fluid surrounding the microparticles, leading to the generation of transient vapor bubbles (microcavitation) around the microparticles. Using cultures of bovine aortic endothelial cells, we demonstrate that induction of intralysosomal microcavitation is an efficient, rapid and selective method of cell killing that is dependent on the number of microparticles, the number of laser pulses, and the fluence of the laser pulses. Cell killing by microcavitation is a very selective process that is restricted to cells containing microparticles, leaving other cells unaffected. Intracytoplasmic release of lysosomal hydrolases is, in part, responsible for cell death, because the protease inhibitors E64d and TLCK diminished cell killing. Using the broad-specificity caspase inhibitor Z-VAD-fmk, we determined that lysosomal hydrolases could induce apoptosis in a caspase-independent manner. We also examined the possibility of microcavitation-induced delayed effects in the cells that survived the treatment. Using flow cytometry, we determined that there was no delayed cell death between 1 and 4 days after microcavitation. Moreover, we did not observe changes in the cell cycle, in expression of the proteins BCL2, HSP70 and HSP27, or in PARP degradation. In conclusion, microcavitation induces rapid and specific cells death (limited only to cells containing microparticles), without producing delayed effects among the surviving cells.

Endothelin-induced changes of secondary messengers in cultured corneal endothelial cells

The effect of endothelins on corneal endothelial cells is not well understood. We have investigated the effects of endothelin-1 (ET-1), endothelin-2 (ET-2) and endothelin-3 (ET-3) on bovine corneal endothelial cellular proliferation and the secondary messenger changes in cells in the presence of ET-1. It was found that the 3H-thymidine uptake was enhanced by ET-1 significantly, whereas ET-2 and ET-3 had no effect. ET-1 remarkably affects the increase of corneal endothelial cells on 3H-thymidine, 3H-leucine, and 3H-uridine uptakes in a dose-dependent manner. The 50% effective concentrations (EC50) for ET-1, as measured by 3H-thymidine uptake, 3H-uridine uptake, and 3H-leucine uptake were 10(-8.78) M, 10(-8.53) M and 10(-8.04) M, respectively. It was found that endothelin-1 increased intracellular calcium concentration by using the method of preloading with Fura-2-AM and assaying with spectrophotometry. The cellular IP1, IP2, and IP3 were also stimulated in the presence of ET-1. Moreover, ET-1 enhanced the basal cellular cAMP and cGMP concentrations in corneal endothelial cells in a dose-dependent manner. Immunofluorescent staining revealed that ET-1 increased the fibronectin protein concentration and changed protein distribution in corneal endothelial cells. These findings indicate that endothelin-1 increases in cell proliferation and biological changes may be involved in changing intracellular calcium mobility, increasing intracellular phosphoinositides, enhancing intracellular cGMP and cAMP accumulation, and fibronectin protein synthesis.

Phase, compositional, and morphological changes of human dentin after Nd:YAG laser treatment

Although techniques for repairing root fracture have been proposed, the prognosis is generally poor. If the fusion of a root fracture by laser is possible, it will offer an alternative to extraction. Our group has attempted to use lasers to fuse a low melting-point bioactive glass to fractured dentin. This report is focused on the phase, compositional, and morphological changes observed by means of X-ray diffractometer, Fourier transforming infrared spectroscopy, and scanning electron microscopy-energy dispersive X-ray spectroscopy in human dentin after exposure to Nd:YAG laser. The irradiation energies were from 150 mJ/ pulse-10 pps-4 s to 150 mJ/pulse-30 pps-4 s. After exposure to Nd:YAG laser, dentin showed four peaks on the X-ray diffractometer that corresponding to a-tricalcium phosphate (TCP) and beta-TCP at 20 = 30.78 degrees/34.21 degrees and 32.47 degrees/33.05 degrees, respectively. The peaks of a-TCP and beta-TCP gradually increased in intensity with the elevation of irradiation energy. In Fourier transforming infrared analysis, two absorption bands at 2200 cm(-1) and 2015 cm(-1) could be traced on dentin treated by Nd:YAG laser with the irradiation energies beyond 150 mJ/pulse-10 pps-4 s. The energy dispersive X-ray results showed that the calcium/phosphorus ratios of the irradiated area proportionally increased with the elevation of irradiation energy. The laser energies of 150 mJ/ pulse-30 pps-4 s and 150 mJ/pulse-20 pps-4 s could result in the a-TCP formation and collagen breakdown. However, the formation of glass-like melted substances without a-TCP at the irradiated site was induced by the energy output of 150 mJ/ pulse-10 pps-4 s. Scanning electron micrographs also revealed that the laser energy of 150 mJ/ pulse-10 pps-4 s was sufficient to prompt melting and recrystallization of dentin crystals without cracking. Therefore, we suggest that the irradiation energy of Nd:YAG laser used to fuse a low melting-point bioactive glass to dentin is 150 mJ/ pulse-10 pps-4 s.

Dihydropyridine calcium channel blockers inhibit ascorbic acid accumulation in human intestinal Caco-2 cells

We investigated the effect of commonly used medications on the accumulation of ascorbic acid in human intestinal Caco-2 cells. Although ascorbic acid is negatively charged at physiological pH, anionic compounds including drugs and metabolites had little effect on its accumulation. On the other hand, hydrophobic 1,4-dihydropyridine compounds (nifedipine and nicardipine), but not other structurally unrelated calcium channel blockers, were found to be potent inhibitors. They inhibited both Na+-dependent and Na+-independent (K+ substituting Na+) accumulation of ascorbic acid. The inhibition was non-competitive with a Ki of 108 microM and 9 microM for nifedipine and nicardipine, respectively. The efflux of ascorbic acid from cells was not affected. Previously, we reported a similar inhibition of ascorbic acid accumulation by estrogens. When nifedipine and estrogens were included in the buffer together, the combined inhibitory effect was less than additive implying that they may act through the same mechanism. The potential clinical significance of dihydropyridine usage on ascorbic acid status in human needs to be considered.

Treatment of tooth fracture by medium-energy CO2 laser and DP-bioactive glass paste: the interaction of enamel and DP-bioactive glass paste during irradiation by CO2 laser

Acute trauma or trauma associated with occlusal disturbance can produce tooth crack or fracture. Although several methods are proposed to treat the defect, however, the prognosis is generally poor. If the fusion of a tooth fracture by laser is possible, it will offer an alternative to extraction or at least serve as an adjunctive treatment in the reconstruction. We have tried to use a continuous-wave CO2 laser and a newly developed DP-bioactive glass paste (DPGP) to fuse or bridge tooth crack or fracture lines. Both the DP-bioactive glass paste and tooth enamel have strong absorption bands at the wavelength of 10.6 microm. Therefore, under CO2 laser, DPGP and enamel should have an effective absorption and melt together. The interface between DPGP and enamel could be regarded as a mixture of DPGP and enamel (DPG-E). The study focused on the phase transformation, microstructure, functional group and thermal behavior of DPG-E with or without CO2 laser irradiation, by the analytical techniques of XRD, FTIR, DTA/TGA, and SEM. The results of XRD showed that the main crystal phase in the DPG-E was dicalcium phosphate dihydrate (CaHPO4.2H2O). It changed into CaHPO4, gamma-Ca2P2O7, beta-Ca2P2O7 and finally alpha-Ca2P2O7 with increasing temperature. In the FTIR analysis, the 720 cm(-1) absorption band ascribed to the P-O-P linkage in pyrophosphate rose up and the intensities of the OH- bands reduced after laser irradiation. In regard to the results of DTA/TGA after irradiation, the weight loss decreased due to the removal of part of absorption water and crystallization water by the CO2 laser. SEM micrographs revealed that the melted masses and the plate-like crystals formed a tight chemical bond between the enamel and DPGP. We expect that DPGP with the help of CO2 laser can be an alternative to the treatment of tooth crack or fracture.

Comparison of clinical, serological and histological findings between non-ulcer dyspepsia patients with and without Helicobacter pylori infection

BACKGROUND AND AIMS

The role of Helicobacter pylori (H. pylori) infection in non-ulcer dyspepsia (NUD) remains controversial. This study investigates the clinical, serological and histological differences between patients with H. pylori-positive and -negative NUD.

METHODS

One hundred and eighty consecutive patients with NUD were enrolled from January to December 1998. The severity of symptoms was evaluated by the Tucci's scoring system. The histological changes of gastric mucosa were assessed according to the Updated Sydney System, and a fasting blood sample was obtained to test the serum gastrin and pepsinogen I levels.

RESULTS

The H. pylori-positive NUD patients were notably older than H. pylori-negative NUD patients (48.2 +/- 15.9 vs 39.8 +/- 15.7 years, P= 0.001). There were no differences in other clinical factors between the two NUD groups. The serum pepsinogen I levels were considerably higher in H. pylori-positive NUD patients than in H. pylori-negative NUD patients (78.9 +/- 42.2 vs 61.5 +/- 43.3 ng/mL, P<0.01). However, no significant differences in serum gastrin levels were discovered between the two groups. The antrum histological scores for chronic inflammation, acute inflammation, gland atrophy and lymphoid follicles were higher in H. pylori-positive NUD patients than in H. pylori-negative NUD patients (2.09 vs 1.01, P<0.001; 1.22 vs 0.36, P<0.001; 0.76 vs 0.36, P<0.01; 0.33 vs 0.13, P<0.01, respectively).

CONCLUSIONS

The present study discovered marked differences in age, serum pepsinogen I levels, histological grades of acute inflammation, chronic inflammation, gland atrophy and lymphoid tissue formation between H. pylori-positive and H. pylori-negative NUD patients. Further investigation of the clinical prognosis of the two groups of patients is necessary.

Origin of retinal pigment epithelium cell damage by pulsed laser irradiance in the nanosecond to microsecond time regimen

BACKGROUND AND OBJECTIVE

Selective photodamage of the retinal pigment epithelium (RPE) is a new technique to treat a variety of retinal diseases without causing adverse effects to surrounding tissues such as the neural retina including the photoreceptors and the choroid. In this study, the mechanism of cell damage after laser irradiation was investigated.

STUDY DESIGN/MATERIALS AND METHODS

Single porcine RPE-melanosomes and RPE cells were irradiated with a Nd:YLF laser (wavelength lambda = 527 nm, adjustable pulse duration tau = 250 nsec-3 microsec) and a Nd:YAG laser (lambda = 532 nm, tau = 8 nsec). Fast flash photography was applied to observe vaporization at melanosomes in suspension. A fluorescence viability assay was used to probe the cells vitality.

RESULTS

The threshold radiant exposures for vaporization around individual melanosomes and for ED50 cell damage are similar at 8-nsec pulse duration. Both thresholds increase with pulse duration; however, the ED50 cell damage radiant exposure is 40% lower at 3 microsec. Temperature calculations to model the onset of vaporization around the melanosomes are in good agreement with the experimental results when assuming a surface temperature of 150 degrees C to initiate vaporization and a homogeneous melanosome absorption coefficient of 8,000 cm(-1). Increasing the number of pulses delivered to RPE cells at a repetition rate of 500 Hz, the ED50 value decreases for all pulse durations. However, the behavior does not obey scaling laws such as the N 1/4 equation.

CONCLUSION

The origin of RPE cell damage for single pulse irradiation up to pulse durations of 3 microsec can be described by a damage mechanism in which microbubbles around the melanosomes cause a rupture of the cell structure. The threshold radiant exposure for RPE damage decreases with increasing number of pulses applied.

Treatment of dental root fracture by medium energy CO2 laser and DP-bioactive glass paste. Part. II: Compositional, structure, and phase changes of DP-bioglass paste after exposed to CO2 laser

Fractured teeth are difficult to treat effectively. Currently, such as root fractures are usually treated by full-coverage restoration, root amputation, or tooth extraction. If the fusion of tooth fracture by laser were possible, it could offer a different therapy to repair fracture teeth. We tried to use a developed DP-bioactive glass paste to fuse or bridge the tooth crack line by a medium energy continuous-wave CO2 laser. The present report was focused on the phase transformation and rescrystallization of DP-bioactive paste during expose to the CO2 laser. The materials will examine by means of XRD, FTIR, DTA/TGA, and SEM. From the study, we could expect that the temperature increase due to laser irradiation must be over than 900 degrees C and the DP-bioactive glass paste could be melted in a short period of time after irradiation. In the study, we successfully developed a DP-bioactive glass paste which could form a melting glass within minutes after exposed to a medium energy density continuous-wave CO2 laser. The paste will be used to bridge the enamel or dentine surface crack by the continuous-wave CO2 laser in the near future.

Influence of gamma irradiation and storage on apheresis platelets

BACKGROUND AND PURPOSE

Gamma irradiation of platelet concentrates to prevent graft-versus-host disease may inactivate contaminated lymphocytes and subsequently inhibit the synthesis of cytokines in the apheresis platelets during storage. We investigated the influence of irradiation and storage on apheresis platelets collected with the COBE Spectra or Fenwal CS-3000 Plus systems.

METHODS

Eleven units of apheresis platelets were collected with a COBE Spectra cell separator and another 11 units with a Fenwal CS-3000 Plus system. Each unit of apheresis platelets was divided into two equal parts: one was irradiated with 3000 cGy directly after blood donation, and the other served as a control. Cell counts, platelet activation marker CD62 antigen, blood gas values, and supernatant concentrations of K+, Na+, lactate, glucose, interleukin-1 beta (IL-1 beta), IL-8, and tumor necrosis factor-alpha (TNF-alpha) were determined in paired samples on the day of collection (day 0) and after 5 days of storage (day 5).

RESULTS

No significant differences in white cell counts or TNF-alpha concentrations were noted between the irradiated and control platelets on day 0 or day 5, whereas the mean proportion of platelets expressing CD62P (22.65% vs 25%, p = 0.014) and the mean IL-1 beta (45.55 pg/mL vs 52.75 pg/mL, p = 0.004) and IL-8 concentrations (10.68 pg/mL vs 13.07 pg/mL, p = 0.015) were significantly lower in irradiated than control platelets on day 5. The 5-day storage significantly increased the mean proportion of platelets expressing CD62P (25.00% vs 15.02%, p = 0.008), mean PO2 (116.34 mm Hg vs 98.07 mm Hg, p = 0.002), and mean concentrations of K+ (3.30 mmol/L vs 3.06 mmol/L, p < 0.001), lactate (15.12 mmol/L vs 3.23 mmol/L, p < 0.001), IL-1 beta (52.75 pg/mL vs 29.73 pg/mL, p = 0.001), and IL-8 (13.07 pg/mL vs 3.62 pg/mL, p < 0.001). Five-day storage also significantly decreased white cell count (0.18 x 10(8) vs 0.74 x 10(8), p < 0.001), PCO2 (19.38 mm Hg vs 50.51 mm Hg, p < 0.001), and concentrations of HCO3- (10.36 mmol/L vs 21.34 mmol/L, p < 0.001) and glucose (193.37 mg/dL vs 309.18 mg/dL, p < 0.001). Platelet counts and concentrations of IL-1 beta, IL-8, and TNF-alpha on day 0 did not differ significantly between control apheresis platelets collected with the Fenwal CS-3000 Plus and those collected with COBE Spectra. The mean white cell count (1.29 x 10(8) vs 0.19 x 10(8), p = 0.002) and the proportion of platelets expressing CD62P (24.71% vs 7.09%, p < 0.001) on day 0, however, were significantly higher in the platelets collected with the Fenwal CS3000-Plus than in those collected with the COBE Spectra.

CONCLUSIONS

Gamma irradiation of apheresis platelets inhibits the expression of platelet CD62P and the secretion of IL-1 beta and IL-8 after 5 days' storage.