An ABA-binding protein with nucleic acid-binding property

Maize cDNA expression library was screened using the antibodies against ABA-binding proteins (ABBP). From 200 000 separated phage plaques, only one cDNA clone coding for a polypeptide was obtained. It shows 60%-65% homology to the genes of nucleic acid-binding proteins in mammalia. However, about 120 cDNA clones coding maize 17s rRNA were unexpectedly obtained. In view of this, the ABBP purified by ABA affinity chromatography and the antibodies derived from the purified ABBP were examined. It is found that rRNA is indeed present in the ABBP. In addition, the obtained antibodies could recognize RNA as well as ABBP. It is suggested that the ABBP have nucleic acid-binding property and can form a complex with rRNA.

Lysine restriction and realimentation affected growth, blood profiles and expression of genes related to protein and fat metabolism in weaned pigs

To investigate the effects of lysine restriction and subsequent realimentation on growth performance, blood profiles and gene expression of leptin and myostatin, 128 weaned pigs [initial body weight (BW) 6.96 ± 1.07 kg, 26 ± 2 days of age] were randomly allotted to four treatments. The starter diets during the first 2 weeks (P1) contained 100%, 80%, 70% or 60% of recommended lysine levels (National Research Council, 1998). Then, common grower 1 and 2 diets were offered for 2 weeks (P2 and P3) each. During P1, average daily gain (ADG) was linearly reduced (p < 0.05) with the increasing levels of lysine restriction. Growth rate was greater in pigs previously fed lysine-restricted diets than well-fed pigs although it did not reach a significant level during realimentation. However, the final BW and overall ADG were the lowest (p < 0.05) and F/G was poor in pigs fed 60% lysine diet. Relative visceral organ weights and composition of skeletal muscle were similar (p > 0.05) among the treatment. Blood triglyceride and glucose levels were increased (p < 0.05) during P1, while blood urine nitrogen, total protein and albumin levels were decreased (p < 0.05) during P2 with the reduction in dietary lysine levels. The abundance of myostatin mRNA in skeletal muscle and leptin mRNA in subcutaneous adipose tissue were lower (p < 0.05) in lysine-restricted pigs than in pigs fed non-restricted diets. In conclusion, 80% and 70% lysine restriction of starter diets resulted in inferior growth and compensatory growth effect was noted during realimentation, while 60% lysine restriction had a negative influence on growth performance. Moreover, the changes in myostatin and leptin mRNA abundance caused by nutritional manipulations may be involved in the regulation of protein and fat deposition in young pigs.

The effect of contact stress on cartilage friction, deformation and wear

Following hip hemiarthroplasty, a metal femoral head articulates against natural acetabular cartilage. Cartilage friction and wear may be influenced by variables including loading time, contact stress, contact area, sliding distance, and sliding speed. The aim of this study was to investigate the effect of these variables on cartilage friction, deformation and wear in a simulation using idealized geometry model. Bovine cartilage pins were reciprocated against metal plates to mimic a hemiarthroplasty articulation under static loading. The effective coefficient of friction (µeff) under contact stresses (0.5 to 16 MPa), contact areas (12 and 64 mm2), stroke lengths (4 and 8 mm), sliding velocities (4 and 8 mm/s), and loading time (1 and 24 hours) were studied. The permanent deformation of cartilage (after 24 hours of recovery) with and without motion was recorded to assess cartilage linear wear.

The µeff was found to remain < 0.35 with contact stresses ≤ 4 MPa. Severe damage to the cartilage occurred at contact stresses > 8 MPa and significantly increased µeff after 12 hours of reciprocation. In long-term, contact area had no significant effect on µeff, and sliding distance and velocity only affected µeff under low contact stresses. The cartilage linear wear increased with contact stress, sliding distance and velocity.

Fabrication of porous beta-tricalcium phosphate with microchannel and customized geometry based on gel-casting and rapid prototyping

The tissue engineering scaffolds with three-dimensional porous structure are regarded to be beneficial to facilitate a sufficient supply of nutrients and enable cell ingrowth in bone reconstruction. However, the pores in scaffolds tend to be blocked by the cell ingrowth and result in a restraint of nutrient supply in the further side of the scaffold. An indirect approach of combining the rapid prototyping and gel-casting technique is introduced in this study to fabricate beta-tricalcium phosphate (beta-TCP) scaffolds which not only have interconnected porous structure, but also have a microchannel network inside. The scaffold was designed with customized geometry that matches the defect area, and a double-scale (micropores-microchannel) porous structure inside that is beneficial for cell ingrowth. The scaffolds fabricated have an open, uniform, and interconnected porous architecture with a pore size of 200-400 microm, and posses an internal channel network with a diameter of 600 microm. The porosity was controllable. The compressive yield strength was 4.5 MPa with a porosity of 70 per cent. X-ray diffraction analysis shows that these fabrication processes do not change the crystal structure and chemical composition of beta-TCP. With this technique, it was also possible to fabricate porous scaffolds with desired pore size, porosity, and microchannel, as well as customized geometries by other bioceramics.

Konjac glucomannan as a carrier material for time--temperature integrator

Hardness, springiness and water retention of konjac glucomannan gel (g-KGM) as a novel carrier material for time-temperature integrator (TTI) in aseptic processing were determined and compared with those of sodium alginate gel (g-SA). Hardness of both g-KGM and g-SA increased with temperature: values of g-SA were significantly higher (p < 0.05) than those of g-KGM at all temperatures. No significant difference in springiness between g-KGM and g-SA from 40 °C to 90 °C and significant differences (p < 0.05) between 100 °C and 140 °C were found. Water retention property of g-KGM was lower than that of g-SA between 60 °C and 100 °C, but much higher between 100 °C and 140 °C. Heat transfer tests performed on g-KGM alone as well as on g-KGM as a carrier, embedded with TTI, α-amylase as an integrator, indicated that g-KGM was suitable for industrial ultrahigh temperature sterilization test.

The effect of surface finish and interstitial fluid on the cement-in-cement interface in revision surgery of the hip

The mechanical performance of the cement-in-cement interface in revision surgery has not been fully investigated. The quantitative effect posed by interstitial fluids and roughening of the primary mantle remains unclear. We have analysed the strength of the bilaminar cement-bone interface after exposure of the surface of the primary mantle to roughening and fluid interference. The end surfaces of cylindrical blocks of cement were machined smooth (Ra = 200 nm) or rough (Ra = 5 μm) and exposed to either different volumes of water and carboxymethylcellulose (a bone-marrow equivalent) or left dry. Secondary blocks were cast against the modelled surface. Monoblocks of cement were used as a control group. The porosity of the samples was investigated using micro-CT. Samples were exposed to a single shearing force to failure.

The mean failure load of the monoblock control was 5.63 kN (95% confidence interval (CI) 5.17 to 6.08) with an estimated shear strength of 36 MPa. When small volumes of any fluid or large volumes were used, the respective values fell between 4.66 kN and 4.84 kN with no significant difference irrespective of roughening (p > 0.05). Large volumes of carboxymethylcellulose significantly weakened the interface. Roughening in this group significantly increased the strength with failure loads of 2.80 kN (95% CI 2.37 to 3.21) compared with 0.86 kN (95% CI 0.43 to 1.27) in the smooth variant. Roughening of the primary mantle may not therefore be as crucial as has been previously thought in clinically relevant circumstances.

The feasibility of light microscopic measurements of intercellular spaces in squamous epithelium in the lower-esophagus of GERD patients

The study aims to determine whether light microscopy can be used to accurately measure the diameters of intercellular spaces between squamous epithelial cells in the lower esophagus, and whether changes in this outcome measure can be used as a diagnostic marker for gastroesophageal reflux disease (GERD). The study has two parts. Part 1 involves 42 asymptomatic controls and 119 patients with typical symptoms of GERD, including 58 with erosive esophagitis (EE), and 61 patients with nonerosive gastroesophageal reflux disease (NERD). All biopsies were taken from the lower esophagus. All samples were observed using an immersion objective, after which diameters were measured by computer-assisted morphometry. Part 2 involves 61 individuals who were randomly selected from part 1, including 19 controls, 13 with NERD and 29 with EE. Diameter measurements using both light microscopy and transmission electron microscopy (TEM) were performed for samples of 61 individuals. Samples from a total of 61 individuals (31 male, 30 female, mean age 44.3 ± 16.0 years) were observed using both light microscopy and TEM. Both methods showed significant differences between control and disease groups; the outcomes from the two methods had a certain correlation (r = 0.605, P = 0.000). Morphometric analysis of all 161 individuals (83 males, 78 females, mean age 41.4 ± 15.7) showed mean diameters from light microscopy to be 0.58 ± 0.16 µm for controls, 1.07 ± 0.30 µm for NERD, and 1.29 ± 0.20 µm for EE; differences between control and disease groups were significant (P<0.05). The optimal cut-off value from receiver operator characteristic analysis was 0.85 µm. Diagnoses were validated using the combination of symptoms of GERD, endoscopy, and 24 h ambulatory pH monitoring as the gold standard. At the optimal cutoff, sensitivity was 93.3% and specificity was 100%. The diameters of the intercellular spaces in squamous epithelium of lower esophagus from controls and in patients with GERD can be quantitatively measured using light microscopy. Dilated diameters can serve as a sensitive, specific, and objective indicator for diagnosis of GERD.

MicroRNA-192 and -215 are upregulated in human gastric cancer in vivo and suppress ALCAM expression in vitro

The dismal outcome of gastric cancer patients highlights the need for diagnostic biomarkers and effective therapeutic targets, such as microRNAs. We sought to discover microRNAs involved in gastric cancer, and to elucidate their downstream target mechanisms. Both cultured gastric epithelial cells (HFE145 and NCI-N87) and primary human gastric tissues (31 non-neoplastic stomach (NS) and 25 gastric carcinomas (GC)) were studied. MicroRNA microarrays and quantitative RT-PCR were applied to discover and verify differentially expressed microRNAs. in vitro cell migration and invasion, cell proliferation, cell cycle and apoptosis assays were executed to elucidate biological effects of microRNA-192 and -215. Western blotting and luciferase assays were performed to confirm direct messenger RNA targeting by microRNA-192 and -215. MicroRNA microarray analyses revealed that 25 and 20 microRNAs were upregulated and downregulated in GC vs NS, respectively. Expression levels of both microRNA-192 and -215 were significantly higher in GC than in NS (P<0.05). Luciferase assays suggested that microRNA-215 inhibits activated leukocyte cell adhesion molecule (ALCAM) expression at the posttranscriptional level. In addition, expression levels of ALCAM were significantly lower in GC than in NS. Mimics and inhibitors, respectively, of microRNA-192 or -215 exerted no effect on cell cycle or apoptosis in the immortalized normal gastric cell line HFE145 or the gastric cancer cell line NCI-N87. However, mimics of microRNA-192 or -215 significantly increased growth rates in HFE145 cells, whereas inhibitors of microRNA-192 or -215 caused significant decreases in growth rates in NCI-N87 cells. ALCAM knockdown by an ALCAM-specific siRNA significantly increased cell growth in HFE145 cells. Both transfection of mimics of microRNA-192 or -215 and ALCAM knockdown by an ALCAM-specific siRNA significantly increased the migration of HFE145 cells. In conclusion, in gastric cancer, both microRNA-192 and -215 are overexpressed in vivo and exert cell growth and migration-promoting effects in vitro, thus representing potential microRNAs with a role in cancer in the human stomach.

A novel and non-destructive method to examine meniscus architecture using 9.4 Tesla MRI

OBJECTIVE

To investigate the ability of high-field (9.4 T) magnetic resonance (MR) imaging to delineate porcine knee meniscal tissue structure and meniscal tears.

MATERIALS AND METHODS

Porcine knees were obtained from a local abattoir, and eight medial menisci with no visible defects were dissected. Lesions simulating longitudinal tears were created on two of the menisci. MR images of the menisci were obtained at 9.4 T using a three-dimensional (3D)-FLASH sequence. A detailed 3D internal architecture of the intact and injured menisci was demonstrated on high-resolution MR images.

RESULTS

High-resolution 3D MR imaging allowed visualisation of internal architecture of the meniscus and disruption to the internal structural network in damage models. The architecture of the porcine knee meniscus revealed by the MR scans appeared similar to the structures visualised by histology in previously reported studies.

CONCLUSION

High-field MRI is a non-destructive technique to examine the internal structural components and damage/wear of meniscal tissue. It has tremendous potential in the field of functional cartilage/meniscus biomechanics and biotribology.

Two-stage operative cytoreduction and intraperitoneal chemotherapy for diffuse malignant peritoneal mesothelioma: Operative morbidity and mortality in phase I and II trials

AIMS

The standard of care for diffuse malignant peritoneal mesothelioma involves operative cytoreduction and intraperitoneal chemotherapy. Most centers favor aggressive operative cytoreduction, accepting high morbidity and mortality. In our trials, patients underwent less extensive cytoreduction followed by prolonged intraperitoneal chemotherapy. Patients underwent a second cytoreduction with heated intraperitoneal chemotherapy. We hypothesized this would result in lower operative morbidity and mortality with similar survival.

METHODS

Hospital records, discharge summaries, microbiology, radiography, and office records were retrospectively reviewed to supplement a prospective database. 30-day morbidity and mortality were categorized, and classified according to the Clavien methodology.

RESULTS

47 first and 39 second operations were performed with 13% and 26% morbidity, respectively. Mortality was 2%. Infections comprised 59% of the morbidity. Inclusive of both operations, formal peritonectomy was performed in 16% of patients, resection of isolated lesions in less than half, and only 19% had a visceral organs other than the spleen resected. At the completion of the protocol, only 3% of patients had visible intraperitoneal disease. The mean total length of stay for both operations combined was 16 ± 23 days. Overall median survival was 54.9 months, and median survival for the epithelioid subtype was 70.2 months.

CONCLUSIONS

A two-stage cytoreduction with intraperitoneal chemotherapy offers median survival comparable to one-stage protocols, with relatively low morbidity, mortality, visceral resections and length of stay despite two operations. This series supports that our protocol is a feasible and safe approach.

Quasimonoenergetic proton bunch generation by dual-peaked electrostatic-field acceleration in foils irradiated by an intense linearly polarized laser

It is found that stable proton acceleration from a thin foil irradiated by a linearly polarized ultraintense laser can be realized for appropriate foil thickness and laser intensity. A dual-peaked electrostatic field, originating from the oscillating and nonoscillating components of the laser ponderomotive force, is formed around the foil surfaces. This field combines radiation-pressure acceleration and target normal sheath acceleration to produce a single quasimonoenergetic ion bunch. A criterion for this mechanism to be operative is obtained and verified by two-dimensional particle-in-cell simulation. At a laser intensity of ∼5.5×10(22)  W/cm(2), quasimonoenergetic GeV proton bunches are obtained with ∼100  MeV energy spread, less than 4° spatial divergence, and ∼50% energy conversion efficiency from the laser.

Hourglass cell development in the soybean seed coat

BACKGROUND AND AIMS

Hourglass cells (HGCs) are prominent cells in the soybean seed coat, and have potential use as 'phytofactories' to produce specific proteins of interest. Previous studies have shown that HGCs initiate differentiation at about 9 d post-anthesis (dpa), assuming their characteristic morphology by 18 dpa. This study aims to document the structural changes in HGCs during this critical period, and to relate these changes to the concurrent development of a specific soybean peroxidase (SBP) encoded by the Ep gene.

METHODS

Pods were collected from plants at specific growth stages. Fresh material was processed for analysis of Ep peroxidase activity. Tissues were processed for scanning and transmission electron microscopy, as well as extracted for western blotting. A null variety lacking expression of Ep peroxidase was grown as a control.

KEY RESULTS AND CONCLUSIONS

At 9 dpa, HGCs are typical undifferentiated plant cells, but from 12-18 dpa they undergo rapid changes in their internal and external structure. By 18 dpa, they have assumed the characteristic hourglass shape with thick cell walls, intercellular air spaces and large central vacuoles. By 45 dpa, all organelles in HGCs have been degraded. Additional observations indicate that plasmodesmata connect all cell types. SBP activity and SBP protein are detectable in the HGC before they are fully differentiated (approx. 18 dpa). In very early stages, SBP activity appears localized in a vacuole as previously predicted. These results increase our understanding of the structure and development of the HGC and will be valuable for future studies aimed at protein targeting to components of the HGC endomembrane systems.

A New Formulation for the Prediction of Polyethylene Wear in Artificial Hip Joints

Artificial joints employing ultra-high molecular weight polyethylene (UHMWPE) are widely used to treat joint diseases and trauma. Wear of the polymer bearing surface largely limits the use of these joints in younger and more active patients. Previous studies have shown the wear factor used in Archard's law for the conventional polyethylene to be highly dependent on contact pressure and this has produced variability in experimental data and has constrained the reliability and applicability of previous computational predictions. A new wear law is proposed, based on wear volume being dependent on, and proportional to, the product of the sliding distance and contact area. The dimensionless proportional constant, wear coefficient, which was independent of contact pressure, was determined from a multi-directional pin on plate study. This was used in computational predictions of the wear of the conventional UHMWPE hip joints. The wear of the polyethylene cup was independently experimentally determined in physiological full hip joint simulator studies. The predicted wear rate from the new computational model was generally increased, with an improved agreement with the experimental measurement compared with the previous computational model. It was shown that wear in the UHMWPE hip joints increased as head size and contact area increased. This resulted in a much larger increase in the wear rate as the head size increased, compared with the previous computational model, and is consistent with clinical observations. This new understanding of the wear mechanism in artificial joints using the UHMWPE bearing surfaces, and the improved ability to predict wear independently and to address previously described discrepancies offer new opportunities to optimize design parameters.

The Effect of Stem Structure on Stress Distribution of a Custom-Made Hip Prosthesis

A custom-made hip is essential for the initial stability and longevity which correspond to an optimal stress distribution, since a standard hip cannot always satisfy every patient's need. In order to find out the designing principles of a custom-made hip, a patient's personal features on which the design was based were acquired. In this study, an integrated finite element model of the hip (including ilium, acetabular cup, femoral head, femoral stem, and femur) was created based on the computed tomography (CT) images of this patient. A series model with different stem length, cross-section, and collodiaphyseal angle were analysed under both static and quasi-static loading conditions. Comparing the stress distribution on each part of the hip prosthesis with that of the natural hip before replacement, the optimal stem structure for this patient was found. In addition, the changes of interspace between acetabular cup and femoral head were measured according to dynamic CT images on the healthy side of this patient during a gait cycle. Results correspond to the trail of the maximum contact stress sites, which were mainly located on the superolateral surface of the acetabular cup. This custom-design method can also be adopted for other patients.