Respiratory effects of exposure to dust from herbs

A group of 150 people occupationally exposed to dust from herbs were examined. As a reference group, 50 urban dwellers, not exposed to any kind of organic dust were examined. People were subjected to routine physical examination and to lung function examinations with the LUNGTEST 500 spirometer (MES, Kraków, Poland). The spirometric values of the forced expiratory volume in one second (FEV (1)), vital capacity (VC) and FEV(1)/VC were recorded before and after work. Physical chest examination revealed pathological crepitations in 10 people (6.7 %). The mean baseline spirometric values in the study and reference groups did not show significant differences compared to the normal values. In the herb workers exposed to organic dust the post-shift decrease of all analysed spirometric values was noted. The post-shift decrease of some spirometric values (VC, VC % of normal values) was highly significant (p < 0.01). There was evidenced of a significant positive correlation between the age of examined people and decrease of VC and FEV(1) values. In 12 exposed workers the decrease of FEV(1) or FEV(1) % of normal values higher than 15 % was noted. 50 % of these workers cultivated thyme (Thymus vulgaris L.). This may suggest that dust from herbs, especially thyme dust, may cause acute airway obstruction. In the group showing significant decrease of FEV(1)/FEV(1) % of normal values ( > 15 %) the frequency of reported respiratory work-related symptoms (83.3 %) was higher than in the rest of exposed group (61.5 %). In conclusion, occupational exposure to dust from herbs may cause harmful effects on the respiratory system among herb processing workers. This indicates the need for use of prophylactic measures in this professional group, the more so as number of people occupationally exposed to dust from herbs is growing.

Identification and measurement of dirt composition of manufactured steel plates using laser-induced breakdown spectroscopy

Laser-induced breakdown spectroscopy (LIBS) was used for the characterization of the main components of the surface residual dirt produced in cold-rolled steel plates as a consequence of the manufacturing stages. At laser fluences between 0.05 J/cm(2) < F < 0.30 J/cm(2), dirt ablation takes place without any contribution from the substrate. Results show that the main components of the dirt are fine particles of Fe mostly homogeneously distributed in a thin layer of grease and soaps. In the primary stages of the manufacturing process carbon residuals can also be found. By measuring light emission from the lambda = 495.9 nm line of Fe(I) after laser ablation, we developed a real-time on-line method for the determination of the concentration of iron particles present in the surface dirt. The obtained results open new possibilities in the design of real-time instruments for industrial applications as a quality control of products and processes.

Dust concentrations and respiratory risks in coalminers: key risk estimates from the British Pneumoconiosis Field Research

To help inform the setting of dust control standards in coalmines, this brief review summarises the most recent and reliable exposure-response relations, for damaging respiratory effects, derived from the Pneumoconiosis Field Research (PFR). Collecting data over 38 years in the British coal industry, this was a programme of prospective research on the respiratory health of coal miners, characterised by regular health surveys and detailed measurements of dust and silica concentrations in the workplace. Exposure-response relations are presented for coal workers' simple pneumoconiosis category II, progressive massive fibrosis, defined deficits of lung function (FEV1), and category II silicosis. This simplified overview provides a guide to the most recent and most reliable estimates from the PFR of dust-related risks of substantial pulmonary disease, and to the magnitude of the effects. Control of dust sufficient to prevent category II simple pneumoconiosis should prevent most cases of progressive massive fibrosis and most dust related large lung function deficits. Where the dust contains high proportions of silica, control to low levels is essential, and even quite brief excursions of silica to high levels must be avoided.

Epidemic asthma in Barcelona: an evaluation of new strategies for the control of soybean dust emission

BACKGROUND

Asthma attacks and mortality due to inhalation of soybean antigens in Barcelona have been well documented. Strict protective measures in the unloading process were established in 1998 to avoid the release of soybean dust into the atmosphere. The present study was undertaken to assess the effectiveness of these latest environmental measures, and, if effective, to recommend their implementation in the many harbours where soybean is unloaded.

METHODS

Levels of soybean aeroallergen were analysed daily during a period of 5 years and 2 months in a total of 1,854 samples, 125 from the pre-intervention period and 1,729 from the postintervention period. Additionally, the number of asthma admissions to the emergency rooms of the city's three largest hospitals was recorded. Asthma patients attended at home by the public home emergency service and judicial autopsies registering asthma deaths were also investigated.

RESULTS

The mean concentration of soybean aeroallergen was 159 U/m(3) in the pre-intervention period and 39 U/m(3) in the postintervention period (p < 0.0001). Significant differences in postintervention aeroallergen concentrations were found between days of soybean unloading (42 U/m(3)) and days of no unloading (33 U/m(3)), with p < 0.0001. No significant relationship was found between concentrations of environmental soybean aeroallergens and the number of emergency room admissions for asthma.

CONCLUSIONS

Implementation of stricter protective measures in silos for the soybean unloading process has reduced the concentration of soybean dust in the atmosphere and evidences the effectiveness of the measures adopted.

Preventing baker's asthma: an alternative strategy

BACKGROUND

Although baker's asthma has attracted considerable research interest over the last 30 years, success in its prevention has been slow to achieve. This paper describes the results of an alternative preventive strategy, based on an observation that the excess of sensitization in bread bakers is largely due to IgE-mediated allergy to fungal amylase, contained in bread improvers. The practical application of the strategy has been to limit bread improver exposures to <1 mg/m3 [8 h time-weighted average (TWA)], whilst exposures to all other ingredients, including flour, have been limited to <10 mg/m3 (8 h TWA).

METHOD

The paper describes the findings of in-house respiratory health surveillance and dust sampling programmes, from a UK food company whose primary interests are milling and baking, over the period following the introduction of the strategy to target the reduction in bread improver exposure.

RESULTS

Over the 10 year period of surveillance, the incidence of symptomatic sensitization in the bread baking sector (2240 per million employees per annum) was greater than for the other flour-using groups (330 per million employees per annum), despite broadly similar total inhalable dust exposures. There was an overall reduction in the incidence of new cases of symptomatic sensitization, from 2085 per million employees per year in the first 5 years of the surveillance programme, to 405 per million employees per year in the subsequent 5 years.

CONCLUSION

The strategy of targeting bread improver exposure is an effective approach for the prevention of new cases of symptomatic sensitization in bread bakeries.

Creating a dust-free environment

Your doctor says you're allergic to dust mites, which explains your constant runny nose and watery eyes. You know the best way to prevent your allergy symptoms is to avoid their cause--dust. You've always tried to keep a clean house. What more can you do?

Vegetable Oil Sprinkling as a Dust Reduction Method in Swine Confinement

The aim of this project was evaluate the effectiveness of an oil sprinkling system as a dust-reduction method for swine production facilities. This article presents the results of the second-year experiment of a multi-year study. The first-year experiment demonstrated that a 5% oil-water emulsion automatically applied at the rate of 3 and 5 g/pig/day achieved a 23% to 34% reduction in total dust. The modifications for the second year experiment included: (1) increasing oil application rate to 7 and 8 g/pig/day, (2) replacing sprinkler heads to achieve a smaller droplet size and a more direct spray pattern on pen-floor surfaces, and (3) more closely matching the treatment and control rooms by stage in the pig production cycle. Four swine finishing rooms were used for this study; two were treatment rooms (soybean oil at 7 g/pig/day, and canola oil 8 g/pig/day) and two were control rooms. The treatment rooms had a low-pressure oil-sprinkling system, which sprinkled 5% oil-to-water mixture 12 times per day, 12 s each time. Concentrations of several environmental contaminants were measured. The average total dust concentration in the control rooms was 1.39 mg/m3. The average total dust concentration in the treatment rooms was 0.65 mg/m3. The treatment reduced dust by an average of 52%, (p = 0.0001). There was no difference in the degree of dust control between soybean oil and canola oil. The respirable dust concentrations were very low in all rooms, and there were no significant differences between rooms in ammonia, carbon dioxide, temperature, or humidity.

[Suspended particulates and lung health]

Based on several severe air pollution episodes, a temporal correlation between high concentrations of particulate matter (PM) and SO2 pollution and acute increases in respiratory and cardiopulmonary mortality had been established in Vienna for the 1970's. After air pollution had decreased in Austria in the 1980's--as documented by data on SO2, and total suspended particles (TSP)--no such associations between day-to-day changes of SO2 and TSP and mortality have been documented any more, however, traffic related pollutants like fine particles and NO2 remained a problem. Therefore, short term effects of PM on lung function, morbidity and mortality were investigated in Vienna, Linz, Graz and a rural control area. Long-term exposure and chronic disease--even more important for public health--were studied in repeated cross-sectional, a mixed longitudinal and a birth cohort study on school children in the city of Linz. Lung function growth was found impaired from long-term exposure to air pollutants and improved in districts where ambient air pollution had decreased. Where only TSP and SO2 had decreased, no continuous improvement of small airway function was found and end-expiratory flow rates stayed impaired where NO2-reduction from technical improvements of cars and industry was counterbalanced by increase of motorized (diesel) traffic. Remaining acute effects of ambient air pollution in 2001 from PM, NO2 and co-pollutants found in a time series study also show that continuing efforts are necessary. Active surface of particles inhaled several hours to days before spirometry was found related to short-term reductions in forced vital capacity-FVC (p<0.01), forced expiratory volume in one second-FEV1 (p<0.01) and maximal expiratory flow rate at 50% of vital capacity-MEF50 (p<0.05). In pupils with asthma or previous airway obstruction 4-week-diaries proved that the following symptoms increased with acute exposure to higher active surface of particles: wheezing (p<0.01), dyspnea, cough when going to sleep, cough at night (p<0.05). Efforts to reduce exposure to fine particles from motor traffic and passive smoking have to be increased if we want to achieve full recovery of children from air pollution effects and best respiratory performance in adulthood. Surveillance seems to be necessary not only for particle mass but also for particle number and surface. Little is known on the mechanisms of irreversible long-term effects of PM such as myocardial infarction and cancer. In a prospective cohort study on 1630 dust-exposed and 1630 non dust-exposed workers matched for smoking we found an increase of lung cancer related to nonfibrous insoluble PM. Other studies were able to relate lung cancer to specific particles like those from diesel engines, and a large prospective study of the American Cancer Society was able to link lung cancer in the general population with long-term exposure to fine particles from combustion processes. All these recent epidemiological findings will have consequences for occupational and ambient air PM standards.

[The new German general threshold limit value for dust--pro and contra the adoption in Austria]

Since it has been realised that inhalation of inert dust is one of the important confounding variables for the development of chronic bronchitis, the threshold values for occupational exposure to these dusts needs to be further decreased. The German Commission for the Investigation of Health Hazards of Chemical Compounds in the Work Area (MAK-Commission) has set a new threshold (MAK-Value) for inert dusts (4 mg/m3 for inhalable dust, 1.5 mg/m3 for respirable dust) in 1997. This value is much lower than the threshold values currently used world-wide. The aim of the present article is to assess the scientific plausibility of the methodology (databases and statistics) used to set these new German MAK-Values, regarding their adoption in Austria. Although we believe that it is substantial to lower the MAK-Value for inert dust in order to prevent the development of chronic bronchitis as a consequence of occupational exposure to inert dusts, the applied methodology used by the German MAK-Commission in 1997 to set the new MAK-Values does not justify the reduction of the threshold limit value. A carefully designed study to establish an appropriate scientific basis for setting a new threshold value for inert dusts in the workplace should be carried out. Meanwhile, at least the currently internationally applied threshold values should be adopted in Austria.

[Dust absorption effect of urban conifers in northeast China]

Dust pollution is much heavier in winter than in other seasons in the cities of Northeast China, because the urban heating system consumes mainly coal as energy resources. Deciduous trees can hardly absorb dust because of their defoliation, and hence, urban conifer trees become more important in dust absorption in winter. This paper studied the dust absorption ability of 7 conifers under the same and different dust pollution status in Shenyang city, Northeast China. The results showed that the dust absorption ability of conifers was decreased in the order of Abies holophilla > Picea mongolica > P. koraiensis > Taxus cupidata > Pinus bungeana > P. armandi > P. tabulaeformis. Different conifers had different surface structures. Pinus bungeana, P. armandi and P. tabulaeformis had smooth surfaces, their cells and stomata arranged in order, and hence, their dust absorption ability was poor. P. koraiensis, Abies holophilla and Taxus cupidata had coarse surfaces, and their cells and stomata arranged out of order. There were even many tubercular things on the surface of P. koraiensis, and hence, their dust absorption ability was stronger. The dust absorption ability of conifers was related the shape of their leaf sections. The upper leaf surface of Pinus bungeana and P. tabulaeformis was arc, not opted to absorb the dust. The leaf section of P. armandi was prism, and its upper surface was narrow, and hence, its dust absorption ability was also poor. The leaves of Picea mongolica and P. koraiensis had four edges, their upper surfaces were broader and flatter than the former three species, and hence, they had stronger dust absorption ability. The leaf section's shape of Abies holophilla and Taxus cupidata was also broad and flat, which made the dust absorption ability of the two latter's was stronger than other three Pinus species and two Picea species.

Comparison of alternate methods of preparing wood sports floors for recoating

Recreational wood sports surfaces receive periodic refinishing. Most school sports floors are recoated annually. The two primary methods of preparing wooden sports floors (creating a "bondable" surface for recoating), "dry abrasion" and "wet abrasion," were examined for employee dust exposure. Refinishing workers' personal total dust exposures were measured for a large collegiate basketball court, a community center gymnasium, and two racquetball courts as well as areas immediately adjoining the work areas. The refinishing workers breathing zone total dust concentrations ranged from 7.2 to 39.0 mg/m(3) and for adjacent areas were 1.1 to 5.3 mg/m(3) for the dry abrasion method. During wet abrasion there were no detectable particles (<0.5 mg/m(3)) in either the work areas or the immediately adjoining areas. The authors conclude the wet abrasion method can control dust levels adequately to prevent cross-contamination of adjacent areas while preventing worker exposures. Further studies in this area would be of interest, particularly determining the nature of the dust and whether it contains any wood component, because certain hardwood dusts have been listed as confirmed human carcinogens.

[Analyses of 1003 death cases of pneumoconiosis from Xuzhou coal mines]

In order to investigate the general rules concerning attack, development and death of pneumoconiosis for providing scientific evidences for preventing, 1003 death cases of pneumoconiosis from Xuzhou coal mine factory were analyzed. Results showed that: (1) The death causes was in the sequence of pneumoconiosis, lung tuberculosis, chronic cor pulmonale, pulmonary carcinoma, etc., and changed into pneumoconiosis, chronic cor pulmonale, pulmonary carcinoma, cerebrovascular accident, etc. since 1990s. Lung tuberculosis would no longer be the main death cause of pneumoconiosis; (2) The accumulative death percentage of the death cases about pneumoconiosis was correlated to the length of dust exposure. The accumulative death percentage increased rapidly in a beeline within 5 to 20 years; (3) The length of service of episode and mean life of digging or mining workers were significantly shorter than that of others (P < 0.01); (4) The mean life and the course of diseases became more and more longer than ever since 1970s. Therefore, it can be concluded that the key for preventing and controlling pneumoconiosis was to decrease the concentration of dust in workplace and to limit the length of service of dust exposure.

Reducing airborne pathogens and dust in commercial hatching cabinets with an electrostatic space charge system

Commercial hatcheries typically infuse hydrogen peroxide or formaldehyde gas into hatching cabinets to reduce airborne pathogens that may lead to disease transmission during the hatch. A nonchemical option, an electrostatic space charge system (ESCS), was customized for full-sized commercial hatching cabinets and was tested extensively in broiler hatcheries. The ESCS cleans air by transferring a strong negative electrostatic charge to dust and microorganisms that are aerosolized during the hatch and collecting the charged particles on grounded plates or surfaces. In studies with three poultry companies, the ESCS resulted in significant (P < 0.0001) reductions of airborne dust of 77%-79%, in Enterobacteriaceae and fungus levels not significantly different (P > or = 0.05) from those with formaldehyde, and in 93%-96% lower Enterobacteriaceae than with no treatment or with hydrogen peroxide treatment (P < 0.01). The ESCS significantly (P < 0.05) reduced airborne Salmonella by 33%-83% compared with no treatment or hydrogen peroxide treatment. Results of this study suggest that the ESCS is a viable alternative to chemical treatment for reducing airborne pathogens in full-sized commercial hatchers, and it also provides dust control and containment, which should be helpful in reducing cross contamination and loading of ventilation ducts within different areas of the hatchery.

Use of protective equipment among California farmers

BACKGROUND

Agriculture is a hazardous industry associated with many occupational injuries and illnesses. We describe California farmers' self-reported exposure to five agricultural hazards and their use of protective equipment.

METHODS

A telephone survey of 1,947 California farmers recorded information on occupational exposure, health outcomes and use of protective equipment to lessen risk from exposure to dust, sun, noise, pesticides and tractors.

RESULTS

Over 93% of respondents reported using personal protection around pesticides; however, fewer than 1/3 used consistent protection against other hazards. Younger age and male sex were associated with better use of protection from dust, noise, pesticide and tractors, but negatively associated with sun protection. There was no consistent relationship of protective behaviors with cigarette smoking, living on the farm, marital status, or time in non-administrative farmwork. Risk perception was strongly associated with behavior; farmers concerned about specific health problems were much more likely to use protective equipment.

CONCLUSIONS

Some farmer characteristics are associated with more safe behaviors, but efforts to encourage protective behaviors on farms should be broadly based in view of a lack of a single risk-taking profile among California farmers.

Reducing dust using the electrocautery pencil with suction combined with the infusion catheter in mastectomy

The dust from the vaporized tissue released during a mastectomy presents a hazard to the patients and the operating room personnel. More dust has been noted using the conventional electrocautery pencil in dissecting breast tissue than with the metal knife used in the past. It is very important to reduce the hazardous dust released during mastectomy. For this study 80 patients undergoing mastectomy for breast cancer from March to June 2001 were divided into two groups: 1) those whose dissections were performed with a combination of an electrocautery pencil and suction with an intravenous infusion catheter (40 cases) and 2) those whose dissections were performed with the conventional method in which the electrocautery pencil was handled by the surgeon and the metal suction tube was used separately by an assistant (40 cases). During mastectomy the personal air sampler was affixed to the operator's neck to collect the dust from the vaporized tissue. The concentrations of the total dust were significantly lower in the combined electrocautery-suction method (mean 5.56 +/- 3.26 microg/m3) than in the conventional method (mean 34.81 +/- 4.83 microg/m3) during mastectomy (P < 0.05). Although the operating time and blood loss were less in the combined method than in the conventional method this difference was not statistically significant (P > 0.05). The combined method of using the electrocautery pencil for dissecting breast tissue along with the intravenous infusion catheter reduced the concentrations of the total dust from the vaporized tissue plume. Furthermore this method reduces the hazards of dust to the surgeons and operating room personnel. Additionally the cost of this combined method is lower than that of the conventional method.