Effect of dietary corn silage inclusion on visceral organ mass, cellularity, and the protein expression of ATP synthase, Na+/K+-ATPase, proliferating cell nuclear antigen and ubiquitin in feedlot steers

Twenty-four steers (initial body weight = 535 ± 5.0 kg) predominately of Angus breeding were used to determine the effect of dietary corn silage inclusion [20, 40, 60, or 80% of dry matter (DM)] on visceral mass, cellularity, and the protein expression of ATP synthase, Na+/K+-ATPase, proliferating cell nuclear antigen (PCNA) and ubiquitin. Steers were fed at similar energy levels (2.1 × NEm requirement). There were no significant treatment effects on specific visceral organ weights. Hepatic Na+/K+-ATPase expression linearly increased (P = 0.01) and ruminal Na+/K+-ATPase expression linearly decreased (P = 0.01) with increasing corn silage inclusion. Hepatic PCNA expression was quadratically affected (P = 0.05) with a decrease when corn silage inclusion increased from 20 to 60%, and an increase when corn silage inclusion increased from 60 to 80%. Renal ATP synthase (P = 0.02) and ubiquitin expression (P = 0.01) were quadratically affected in a similar pattern with an increase when corn silage inclusion increased from 20 to 60%, and a decrease when corn silage inclusion increased from 60 to 80%. These results indicate that different dietary corn silage inclusions, at similar dietary energy intake, may alter rumen, liver, and kidney energy expenditure, at least in part, through changes in specific metabolism rather than mass. Key words: Corn silage inclusion, visceral organ mass, cellular energy metabolism, steer

Magnetoelastic coupling through the antiferromagnet-to-ferromagnet transition of quasi-two-dimensional [Cu(HF2)(pyz)2]BF4 using infrared spectroscopy

We investigated magnetoelastic coupling through the field-driven transition to the fully polarized magnetic state in quasi-two-dimensional [Cu(HF2)(pyz)2]BF4 by magnetoinfrared spectroscopy. This transition modifies out-of-plane ring distortion and bending vibrational modes of the pyrazine ligand. The extent of these distortions increases with the field, systematically tracking the low-temperature magnetization. These distortions weaken the antiferromagnetic spin exchange, a finding that provides important insight into magnetic transitions in other copper halides.

Effects of the timing of initial feeding on growth and survival of spotted mandarin fish Siniperca scherzeri larvae

The effects of delayed first feeding on growth and survival of spotted mandarin fish Siniperca scherzeri larvae were examined under controlled conditions. Morphometric characters [yolk-sac volume, oil globule volume, head depth (H(D)), body depth (B(D)), eye diameter (E(D)), musculature height (M(H)), mouth diameter (M(D)) and total length (L(T))], body mass (M), specific growth rate (S(GR)) and survival were evaluated under different first-feeding time (2, 3, 4 and 5 days after hatching). Larvae began to feed exogenously at 2 days after hatching (DAH) and the point of no return (P(NR)) occurred between 5 and 6 DAH at 23 degrees C, range +/-1.0 degrees C. The yolk volume of larvae first-fed at 2 days had a significant difference compared with that of larvae first-fed at 3, 4 and 5 days on 3 and 4 DAH. The larvae first-fed at 2 days achieved comparatively better growth performance than that of 3, 4 and 5 days. On 5 DAH, all morphometric characters had significant differences between 2 and 5 days and 2 and 4 days initial feeding, respectively. Total mortality was recorded on 9 DAH for the larvae first-fed at 5 days. On 12 DAH, significant differences were observed between 2 and 4 days and 3 and 4 days initial feeding for all morphometric characters. From 16 DAH to the end of experiment, all growth variables of the larvae first-fed at 2 days were significantly higher than those in other treatments. The S(GR) (2-9 DAH) first-fed at 2 and 3 days were significantly higher than 4 and 5 day treatments, and the S(GR) (9-16 DAH) first-fed at 2 days was significantly higher than 3 and 4 day treatments. There was no significant difference, however, of S(GR) (16-28 DAH) among treatments. Survival rate was significantly higher at 2 days initial feeding (27.42%) when compared with 3 (15.96%) and 4 days (7.92%) initial feeding at the end of experiment. The present study suggests that the first feeding of S. scherzeri larvae should be initiated at 2 days after hatching for achieving good growth and survival.

Selenomethionine stimulates expression of glutathione peroxidase 1 and 3 and growth of bovine mammary epithelial cells in primary culture

This study examined the localization of cellular glutathione peroxidase (GPx1) and extracellular glutathione peroxidase (GPx3) in lactating mammary tissue and in primary cultures of bovine mammary epithelial cells (BMEC). The effect of selenium as selenomethionine (SeMet) on the growth and viability of BMEC and GPx protein expression and activity were also studied. Single mammary epithelial cells were recovered by serial collagenase/hyaluronidase digestion from lactating bovine mammary tissue and cultured in a low-serum collagen gel system enriched with lactogenic hormones and 0, 10, 20, or 50 nM SeMet. Positive immunostaining with anti-cytokeratin and bovine anti-casein confirmed the epithelial nature and differentiated state of BMEC. Addition of SeMet to media facilitated rapid confluence of BMEC and formation of dome structures. Immunohistochemical and immunocytochemical staining revealed that both GPx1 and GPx3 are synthesized by BMEC and localized in the cytoplasm and nucleus. Up to 50 nM SeMet linearly increased BMEC number and viability over 5 d of culture. Bovine mammary epithelial cells cultured in SeMet-supplemented medium also exhibited markedly elevated GPx activity and linear increases in abundance of GPx1 and GPx3 proteins. It is apparent that SeMet degradation to release Se for synthesis of selenoproteins is carried out by BMEC. Results indicate that bovine mammary epithelial cells express GPx1 and GPx3 in vivo and in vitro; SeMet enhances expression of these selenoproteins in vitro and the growth and viability of BMEC.

Effect of dry matter intake on visceral organ mass, cellularity, and the protein expression of ATP synthase, Na+/K+-ATPase, proliferating cell nuclear antigen and ubiquitin in feedlot steers

Twenty-four steers [467 ± 7.2 kg initial body weight (BW)] predominately of Angus breeding were used to determine the effect of dry matter intake (1.25, 1.50, 1.75, and 2.00% of BW) on visceral mass, cellularity, and the protein expression of ATP synthase, Na+/K+-ATPase, proliferating cell nuclear antigen (PCNA) and ubiquitin. There were linear increases (P ≤ 0.05) in weights of total viscera, total digestive tract, liver, kidney, heart, lung, spleen, rumen, and abomasum with increasing dry matter intake (DMI). Protein concentration decreased linearly (P < 0.05) in small intestinal mucosa as DMI increased. PCNA expression increased linearly (P < 0.01) in liver as DMI increased. PCNA expression was affected quadratically (P < 0.05) in pancreas and small intestinal mucosa with an increase when DMI increased from 1.25 to 1.75% of BW, and a decrease when DMI increased from 1.75 to 2% of BW. ATP synthase, Na+/K+-ATPase, and ubiquitin expression in pancreas and ubiquitin expression in small intestinal mucosa increased linearly (P < 0.05) as DMI increased. These results indicate that increasing DMI increases the mass of visceral organs and carcass and influences expression of proteins influencing energy utilization and efficiency in pancreas, small intestine, liver, and sternomandibularis muscle.Key words: Dry matter intake, visceral organ mass, cellular energy metabolism, steer

A quantum transfer matrix method for one-dimensional disordered electronic systems

We develop a novel quantum transfer matrix method to study thermodynamic properties of one-dimensional (1D) disordered electronic systems. It is shown that the partition function can be expressed as a product of 2 × 2 local transfer matrices. We demonstrate this method by applying it to the 1D disordered Anderson model. Thermodynamic quantities of this model are calculated and discussed.

Excimer laser chemical ammonia patterning on PET film

Laser is a promising technique used for biopolymer surface modification with micro and/or nano features. In this work, a 193 nm excimer laser was used for poly (ethylene terephthalate) (PET) surfaces chemical patterning. The ablation threshold of the PET film used in the experiments was 62 mJ/cm(2) measured before surface modification. Surface chemical patterning was performed by irradiating PET film in a vacuum chamber filled with ammonia at the flux of 10, 15, 20, 25 ml/min. Roughness of the surface characterized by profilometry showed that there were no significant observed change after modification comparing original film. But the hydrophilicity of the surface increased after patterning and a minimum water contact angle was obtained at the gas flux of 20 ml/min. FT-IR/ATR results showed the distinct amino absorption bands presented at 3352 cm(-1)and 1613 cm(-1) after modification and XPS binding energies of C(1s) at 285.5 eV and N(1s) at 399.0 eV verified the existence of C-N bond formation on the PET film surface. Tof-SIMS ions mapping used to identify the amine containing fragments corroborates that amino grafting mainly happened inside the laser irradiation area of the PET surface. A hypothesized radical reaction mechanism proposes that the collision between radicals in ammonia and on the PET surface caused by the incident laser provokes the grafting of amino groups.

Co-graft of acellular dermal matrix and autogenous microskin in a child with extensive burns

A 6-yr-old boy was the victim of a burns accident in a public bathhouse. The burns involved the face, neck, upper and lower extremities, anterior and posterior trunk, and both buttocks, covering 72% of the total body surface area (TBSA). The lesions in the lower extremities and parts of the right upper extremity were deep partial-thickness, comprising 40% TBSA. On day 5 post-burn, the lesions in both lower extremities were excised to the extent of the fascia under general anaesthesia. Meshed J1 Jayya Acellular Dermis®, a kind of acellular allodermal (ADM) matrix, was then placed on the left knee joint. The right knee joint served as control. The wounds in both lower extremities were then overlaid with microskin autografting. At 19 days post-application, the lesions in both lower extremities had almost completely resurfaced. Follow-up at six months revealed well-healed and stable skin of acellular ADM and microskin autografts on the left knee. However, the skin of the right knee was unstable and there was a chronic residual ulcer. Both legs showed some significant hypertrophic scars. The left knee joint (acellular ADM grafted site) showed mild contractures, while the right knee joint developed a significant contracture. The "skin" of the co-graft covered site appeared thicker and more elastic. The movement range of the left knee joint was much larger than that of the right knee joint. These results suggest that co-graft of acellular dermal matrix and autogenous microskin may be an effective way to repair this functional site in children with extensive burns and to improve the functional and cosmetic results.

Spin-lattice interactions mediated by magnetic field

Application of a magnetic field offers an incisive opportunity to tune competing interactions in complex materials. Here we probe field-induced changes in the local structure of DyMn2O5 by using magnetoinfrared spectroscopy. The high tunability of the dielectric constant and ferroelectric polarization with field is well documented in the literature, but the lattice response on the microscopic level remains unknown. In this work, we reveal the dynamic nature of the local structural response to field and analyze it in terms of calculated mode displacements and local lattice distortions.

Pancreatic mass, cellularity, and alpha-amylase and trypsin activity in feedlot steers fed diets differing in crude protein concentration

Twenty-four yearling beef steers (initial BW = 510 +/- 4.9 kg) predominantly of Angus breeding were used in a randomized complete block design to determine the effect of dietary CP concentration on pancreatic cellularity, mass, and alpha-amylase and trypsin activities. Treatment diets were formulated to contain 8.8, 11.0, 13.2, and 15.4% CP. Soybean meal and Top Soy (ruminal bypass soybean meal) were used as supplemental protein sources to ensure that MP intake was increased with increasing dietary CP concentrations. Steers were penned in groups of 4 (1 steer per treatment) and individually fed at 2.5x the NE(m) requirement by using Calan gates for 28 d before tissue collection. Four steers (1 pen) were slaughtered per week. Pancreases were weighed, subsampled, frozen in liquid N(2), and stored at -80 degrees C until analyses for DNA, RNA, and protein concentrations, and alpha-amylase and trypsin activities. Pancreatic weight (g and g/kg of BW) did not differ among treatment groups. Pancreatic DNA concentration (mg/g) decreased linearly (P = 0.06) with increasing CP concentration. Pancreatic protein (g/pancreas) increased linearly (P = 0.08) with increasing dietary CP concentration. Pancreatic alpha-amylase activity (U/g, U/mg of DNA, U/g of protein, U/pancreas, and U/kg of BW) increased linearly (P < or = 0.04) with increasing dietary CP concentration. Pancreatic trypsin activity (U/g, U/g of DNA, U/g of protein, U/pancreas, and U/kg of BW) increased linearly (P < or = 0.09) with increasing dietary CP concentration. Pancreatic alpha-amylase and trypsin activities (U/mg of RNA) responded quadratically (P < or = 0.09), with the greatest alpha-amylase activity observed in the 13.2% CP treatment. These data indicate that increasing dietary CP concentration decreases pancreatic cell numbers and also increases the concentration and content of pancreatic alpha-amylase and trypsin activities. Changes in cell number and size may be important factors regulating digestive enzyme production in the pancreas of cattle.

Assessing optimal fermentation type for bio-hydrogen production in continuous-flow acidogenic reactors

In this study, the optimal fermentation type and the operating conditions of anaerobic process in continuous-flow acidogenic reactors was investigated for the maximization of bio-hydrogen production using mixed cultures. Butyric acid type fermentation occurred at pH>6, propionic acid type fermentation occurred at pH about 5.5 with E(h) (redox potential) >-278mV, and ethanol-type fermentation occurred at pH<4.5. The representative strains of these fermentations were Clostridium sp., Propionibacterium sp. and Bacteriodes sp., respectively. Ethanol fermentation was optimal type by comparing the operating stabilities and hydrogen production capacities between the fermentation types, which remained stable when the organic loading rate (OLR) reached the highest OLR at 86.1kgCOD/m(3)d. The maximum hydrogen production reached up to 14.99L/d.

Synthesis of PHAs from waster under various C:N ratios

Polyhydroxyalkanoates (PHAs) production was carried out under various C:N ratios. A ratio of 100 resulted best polymer yield. C-source was an important factor in synthesis. For example, as the ratio of valeric acid (C5) to butyric acid (C4) in N-free medium was increased, the mole fraction of HV in the copolymer increased. When soy waste was used as a C-source a copolymer, a high HV mole fraction (HB:HV, 75:25) was produced while when malt waste was used, a much lower HV mole fraction (HB:HV, 90:10) was generated. It was concluded that activated sludge bacteria could be induced to produce PHAs using food wastes as C-sources and this could be the basis for production of biodegradable plastics.

Non-exponential photoluminescence decay dynamics of localized carriers in disordered InGaN/GaN quantum wells: the role of localization length

In this article, we report a combined experimental and theoretical study on the luminescence dynamics of localized carriers in disordered InGaN/GaN quantum wells. The luminescence intensity of localized carriers is found to exhibit an unusual non-exponential decay. Adopting a new model taking the radiative recombination and phonon-assisted hopping transition between different localized states into account, which was recently developed by Rubel et al., the non-exponential decay behavior of the carriers can be quantitatively interpreted. Combining with precise structure characterization, the theoretical simulations show that the localization length of localized carriers is a key parameter governing their luminescence decay dynamics.

Nano-structural bioactive gradient coating fabricated by computer controlled plasma-spraying technology

The poor mechanical property of hydroxyapatite was the major problem for load bearing and implant coating in clinical applications. To overcome this weakness, a bioactive gradient coating with a special design composition of hydroxyapatite (HA), ZrO2, Ti, bioglass was developed. This 120 microm coating with an upper layer of 30-50 microm porous HA produced by computer controlled plasma spraying which maintained energy level of the plasma which ensure proper melting of powder. The crystal size of the coating was 18.6-26.2 nm. Transformation of t-ZrO2 to m-ZrO2 reduced the thermal stress that weakened the coating and lowered down interfacial strength of the coating and metal substrate. Thermal stress of sprayed coating was 16.4 MPa which was much smaller than the sample without thermal treatment of 67.1 MPa. Interfacial strength between the coating and metal substrate was 53 MPa which is much higher than conventional Hydroxyapatite coating. Based on XRD analysis crystallinity of HA approached 98%. Therefore, high temperature treatment improved long term stability of the coating through improved crystallinity of hydroxyapatite and reduced other impure calcium phosphate phase.

Controllable preparation of monodisperse O/W and W/O emulsions in the same microfluidic device

This letter presents a simple way to prepare monodisperse O/W and W/O emulsions in the same T-junction microfluidic device just by changing the wetting properties of the microchannel wall with different surfactants. Highly uniform droplets ranging from 50 to 400 mum with a polydispersity index (sigma) value of less than 2% were successfully prepared. With the change in surfactants and surfactant concentrations, the interfacial tension and the wetting properties varied, and disordered or ordered two-phase flow patterns could be controllable. Monodisperse O/W and W/O emulsions were prepared under the action of a cross-flowing shear force or a perpendicular shear force by using an oil solution with 0.1-2.0 wt % Span 80 and an aqueous solution with 0.1-2.0 wt % Tween 20 as a continuous-phase flow, respectively. It gives a controllable method of preparing O/W and W/O emulsions in the same microfluidic device.

Stability study on the nitrile hydratase of Nocardia sp. 108: from resting cell to crude enzyme preparation

In recent years, nitrile hydratases (NHases) have drawn increasing attentions due to their critical roles in organic synthesis. In present paper, extensive investigation on the stability and activity of the NHase from Nocardia sp. 108, which is succeed in the industrial application in China, were conducted by the bioconversion of acrylonitrile to acrylamide in a batch manner. Cultivation study demonstrated that biosynthesis of NHase changed significantly with culture time, and the optimal NHase biosynthesis phase was 45 h after inoculation with NHase activity of 1209.8 U/g of biomass. Stability study indicated that crude enzyme preparation both exhibit a good stability when exposed to the pH 7.2 tris-HCl buffer at 4 degrees C for 4 h.

Synthesis of micrometer-sized hard silica spheres with uniform mesopore size and textural pores

Micrometer-sized silica spheres were prepared using a new pH-induced rapid colloid aggregation method in water-in-oil (W/O) emulsion separately with F127 and the mixture of Pluronic triblock copolymer (F127, P123, or P105) and PEG20000 as templates. All the mesoporous silica spheres exhibited high surface areas (657-1145 m2/g) and large pore volumes (0.46-2.16 ml/g). Through optimizing the synthetic conditions, hard silica spheres with narrow particle size distribution, uniform pore size, and textural pores were obtained. Finally, the mechanism of this synthetic route is discussed.

Unconventional spinodal surface fluctuations on polymer films

We study the temporal growth pattern of surface fluctuations on a series of spinodally unstable polymer films where the instability can be adjusted with the film thickness, h0. For the most unstable film studied (whose /(h0 - h(sp))/h(sp)/ = 0.988; h(sp) is the thickness where the second derivative of the interfacial potential of the film equals zero), the growth rate function of the surface modes as a function of the wavevector fits well to the mean-field theory. When the film thickness is increased such that /(h0 - h(sp))/h(sp)/ < or = 0.977, the mean-field theory demonstrates marked disagreement with experiment, notwithstanding the provision of the known corrections from nonlinear effects and thermal noise. We show that the deviations arise from large-amplitude fluctuations induced by homogeneous nucleation, which are not considered in the conventional treatments.

Heavy fermion fluid in high magnetic fields: an infrared study of CeRu4Sb12

We report a comprehensive infrared magnetospectroscopy study of a CeRu4Sb12 compound revealing quasiparticles with a heavy effective mass m*, with a detailed analysis of optical constants in fields up to 17 T. We find that the applied magnetic field strongly affects the low-energy excitations in the system. In particular, the magnitude of m* approximately = 70 m(b) (m(b) is the quasiparticle band mass) at 10 K is suppressed by as much as 25% at 17 T. This effect is in quantitative agreement with the mean-field solution of the periodic Anderson model augmented with a Zeeman term.

A heat inducible tyrosinase with distinct properties from Bacillus thuringiensis

AIMS

The objective of this work was to purify the tyrosinase from Bacillusthuringiensis subsp. kurstaki (Bt) (CCTCC AB 90010) and study its enzymatic properties.

METHODS AND RESULTS

A 'one-step' purification method was used in this work, which was an easy, high-yield purification method. Tyrosinase activity of this purity was measured under different conditions to study its kinetic characterizations. The optimum pH and thermal stability of this enzyme were also determined. The results revealed that the tyrosinase from Bt has distinct properties compared with those from other sources.

CONCLUSIONS

A heat-inducible tyrosinase of a wild strain of Bt was identified and partially characterized.

SIGNIFICANCE AND IMPACT OF THE STUDY

The distinct properties of Bt tyrosinase are important to the application of Bt as a biology pesticide.

Production of interspecies chimeras by transplanting rosy barb (Puntius conchonius) embryonic cells to zebrafish (Danio rerio) embryos

Establishment of a cell-mediated gene transfer system has potential as a new breeding technique for commercially valuable fishes. As an important step toward developing an inter-species chimera, cells from blastula-stage embryos of rosy barb (Puntius conchonius) were transplanted into zebrafish (Danio rerio) blastula-stage embryos to observe the development of the recipient. From the total of 473 transplants obtained only a fraction of 13 chimeras appeared perfectly normal after one month. Over two in normal 13 chimeras showed some characters from the donor cells with scarce pigmentation. This is the first successful inter-species study on zebrafish by using blastula cell transplants from rosy barb both belonging to the same family cyprinidae.

A new emulsion method to synthesize well-defined mesoporous particles

A new emulsion method for preparing ordered mesoporous materials with polymer PEG as the swelling agent has been explored in the present work. The synthesis conditions including the chain length and the PEG concentration, the duration of aging, the kind of emulsion, and the time when the swelling agents were added to the reaction system are discussed. The results show that with the advantage of the emulsion method, the nucleation and growth were controlled very well. The nicely spherical particles produced by the emulsion method were more uniform and less prone to agglomerate than those produced through the hydrothermal method. When different MW PEG were added as swelling agents, the pore size changed little: it was centered around 4 nm and had a narrow distribution. When different concentrations of PEG were applied, BET surface area, pore size, and pore volume changed. To summarize, in the formation of mesoporous materials, polymers such as PEG can not only control the pore size from 3 to 70 nm through variation of concentration, but also regulate the structures and improve the morphology of particles by the chain length of polymers. By adjusting the time of addition of the swelling agents, a poroshell mesoporous material was prepared. This method is particularly important for those applications that strictly require particle uniformity, such as chromatography separation.

Fabrication of compact silver nanoshells on polystyrene spheres through electrostatic attraction

Nanoshells composed of close-packed silver nanocrystals have been fabricated on polystyrene spheres via direct electrostatic attraction at appropriate pH; the thickness and roughness of the shell can be readily controlled through a layer-by-layer technique.

Double fusion does not occur in Panum's limiting case: evidence from orientation disparity

When two lines of different orientations are combined in regular stereograms, the orientation of the resulting line is different from those of the monocular lines. In this study we investigate the percept elicited by orientation disparity in Panum's limiting case. A variant of Panum's limiting case was designed to include orientation disparity. The single line in one half-image tilted leftwards. One of the double lines in the other half-image was parallel to the single line, while the other one tilted rightwards with obliquity one third that of the single line. In this stimulus configuration, if the single line in one half-image fuses with both lines in the other half-image at the same time, both of the two lines perceived after fusion should tilt leftwards. If double fusion does not happen, the two lines should tilt leftwards and rightwards respectively. The results of this study are in agreement with the latter prediction, which implies that double fusion does not occur in this variant of Panum's limiting case.