Bifunctional Metal Organic Framework Catalysts for Multistep Reactions: MOF-Cu(BTC)-[Pd] Catalyst for One-Pot Heteroannulation of Acetylenic Compounds

Continuous flow catalysis with CuBTC improves reaction time for synthesis of xanthene derivatives

The copper-based metal-organic framework (MOF) CuBTC (where H3BTC = benzene-1,3,5-tricarboxylate) has been shown to be an efficient heterogeneous catalyst for the generation of 1,8-dioxo-octa-hydro xanthene derivatives, which are valuable synthetic targets for the pharmaceutical industry. We have applied this catalytic capability of CuBTC to a continuous flow system to produce the open chain form of 3,3,6,6-tetramethyl-9-phenyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione, a xanthene derivative from benzaldehyde and dimedone. An acid work-up after producing the open chain form of the xanthene derivative was used to achieve ring closure and form the final xanthene product. The CuBTC used to catalyze the reaction under continuous flow was confirmed to be stable throughout this process via analysis by SEM, pXRD, and FT-IR spectroscopy, elemental analysis, and XPS. The reaction to produce the open-chain form of the xanthene derivative produced an average yield of 33% ± 14% under the continuous flow (compared to 33% ± 0.12% of performing it under batch conditions). Based on the data obtained from this work, the continuous flow system required 22.5x less time to produce the desired xanthene derivative at comparable yields to batch reaction conditions. These results would allow for the xanthene derivative to be produced much faster, at a lower cost, and require less personal time while also removing the need to perform catalyst remove post reaction.

Cobalt isatin-Schiff-base derivative of MOF as a heterogeneous multifunctional bio-photocatalyst for sunlight-induced tandem air oxidation condensation process

A sunlight-induced tandem air oxidation-condensation of alcohols with ortho-substituted anilines or malononitrile for the efficient synthesis of benz-imidazoles/-oxazoles/-thiazoles, or benzylidene malononitrile catalyzed by Co-isatin-Schiff-base-MIL-101(Fe) as a heterogeneous multifunctional bio-photocatalyst is reported. In these reactions, Co-isatin-Schiff-base-MIL-101(Fe) acts both as a photocatalyst, and a Lewis acid to catalyze the reaction of the in-situ formed aldehydes with o-substituted anilines or malononitrile. A significant decrease in the band gap energy and an increase in the characteristic emission of MIL-101(Fe) after functionalization with cobalt Schiff-base according to the DRS analysis and fluorescence spectrophotometry, respectively, indicate that the photocatalytic effectiveness of the catalyst is associated primarily to the synergetic influence of Fe-O cluster and Co-Schiff-base. EPR results obviously pointed out that Co-isatin-Schiff-base-MIL-101(Fe) is capable of creating ¹O₂ and O₂^⋅- as active oxygen species under visible light irradiation. Using an inexpensive catalyst, sunlight irradiation, air as a cost-effective and abundant oxidant, and a low amount of the catalyst with recoverability and durability in ethanol as a green solvent, make this methodology as an environmentally friendly process with energy-saving organic synthetic strategies. Furthermore, Co-isatin-Schiff-base-MIL-101(Fe) displays excellent photocatalytic antibacterial activity under sunlight irradiation against E. coli, S. aureus and S. pyogenes. Based on our knowledge, this is the first report of using a bio-photocatalyst for the synthesis of the target molecules.

Bimetallic Sites for Catalysis: From Binuclear Metal Sites to Bimetallic Nanoclusters and Nanoparticles

Heterogeneous bimetallic catalysts have broad applications in industrial processes, but achieving a fundamental understanding on the nature of the active sites in bimetallic catalysts at the atomic and molecular level is very challenging due to the structural complexity of the bimetallic catalysts. Comparing the structural features and the catalytic performances of different bimetallic entities will favor the formation of a unified understanding of the structure-reactivity relationships in heterogeneous bimetallic catalysts and thereby facilitate the upgrading of the current bimetallic catalysts. In this review, we will discuss the geometric and electronic structures of three representative types of bimetallic catalysts (bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles) and then summarize the synthesis methodologies and characterization techniques for different bimetallic entities, with emphasis on the recent progress made in the past decade. The catalytic applications of supported bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles for a series of important reactions are discussed. Finally, we will discuss the future research directions of catalysis based on supported bimetallic catalysts and, more generally, the prospective developments of heterogeneous catalysis in both fundamental research and practical applications.

Synthesis of Phenol-Tagged Ruthenium Alkylidene Olefin Metathesis Catalysts for Robust Immobilisation Inside Metal–Organic Framework Support

Two new unsymmetrical N-heterocyclic carbene ligand (uNHC)-based ruthenium complexes featuring phenolic OH function were obtained and fully characterised. The more active one was then immobilised on the metal–organic framework (MOF) solid support (Al)MIL-101-NH2. The catalytic activity of such a heterogeneous system was tested, showing that, while the heterogeneous catalyst is less active than the corresponding homogeneous catalyst in solution, it can catalyse selected olefin metathesis reactions, serving as the proof-of-concept for the immobilisation of catalytically active complexes in MOFs using a phenolic tag.

Copper-Based Metal–Organic Frameworks (MOFs) as an Emerging Catalytic Framework for Click Chemistry

In the extensive terrain of catalytic procedures for the synthesis of organic molecules, metal–organic frameworks (MOFs) as heterogenous catalysts have been investigated in a variety of chemical processes, including Friedel–Crafts reactions, condensation reactions, oxidations, and coupling reactions, and utilized owing to their specific properties such as high porosity, tuneability, extraordinary catalytic activity, and recyclability. The eminent copper-tailored MOF materials can be exceptionally dynamic and regioselective catalysts for click reactions (1,3-dipolar cycloaddition reaction). Considering the fact that Cu(I)-catalyzed alkyne–azide cycloaddition (CuAAC) reactions can be catalyzed by several other copper catalysts such as Cu (II)-β-cyclodextrin, Cu(OAc)2, Fe3O4@SiO2, picolinimidoamide–Cu(II) complex, and Cu(II) porphyrin graphene, the properties of sorption and reusability, as well as the high density of copper-MOFs, open an efficient and robust pathway for regimented catalysis of this reaction. This review provides a comprehensive description and analysis of the relevant literature on the utilization of Cu-MOFs as catalysts for CuAAC ‘click’ reactions published in the past decade.

Grafting (S)-2-Phenylpropionic Acid on Coordinatively Unsaturated Metal Centers of MIL-101(Al) Metal-Organic Frameworks for Improved Enantioseparation

Chiral metal-organic frameworks (cMOFs) are emerging chiral stationary phases for enantioseparation owing to their porosity and designability. However, a great number of cMOF materials show poor separation performance for chiral drugs in high-performance liquid chromatography (HPLC). The possible reasons might be the irregular shapes of MOFs and the low grafting degree of chiral ligands. Herein, MIL-101-Ppa@SiO₂ was synthesized by a simple coordination post-synthetic modification method using (S)-(+)-2-Phenylpropionic acid and applied as the chiral stationary phase to separate chiral compounds by HPLC. NH₂-MIL-101-Ppa@SiO₂ prepared via covalent post-synthetic modification was used for comparison. The results showed that the chiral ligand density of MIL-101-Ppa@SiO₂ was higher than that of NH₂-MIL-101-Ppa@SiO₂, and the MIL-101-Ppa@SiO₂ column exhibited better chiral separation performance and structural stability. The binding affinities between MIL-101-Ppa@SiO₂ and chiral compounds were simulated to prove the mechanism of the molecular interactions during HPLC. These results revealed that cMOFs prepared by coordination post-synthetic modification could increase the grafting degree and enhance the separation performance. This method can provide ideas for the synthesis of cMOFs.

Highly stable Pd2+ species anchoring on ethylenediamine-grafted-MIL-101(Cr) as a robust oxidation catalyst

Highly stable Pd2+ species were anchored in ethylenediamine-grafted on MIL-101(Cr). The ethylenediamine (0.3-1.2 mmol/g) was first grafted onto MIL-101(Cr), then Pd2+ (0.03-0.2 mmol Pd/g) was incorporated by double-solvent adsorption. Fourier...

Coordinatively Unsaturated Hf-MOF-808 Prepared via Hydrothermal Synthesis as a Bifunctional Catalyst for the Tandem N-Alkylation of Amines with Benzyl Alcohol

The modulated hydrothermal (MHT) synthesis of an active and selective Hf-MOF-808 material for the N-alkylation reaction of aniline with benzyl alcohol under base-free mild reaction conditions is reported. Through kinetic experiments and isotopically labeled NMR spectroscopy studies, we have demonstrated that the reaction mechanism occurs via borrowing hydrogen (BH) pathway, in which the alcohol dehydrogenation is the limiting step. The high concentration of defective -OH groups generated on the metallic nodes through MHT synthesis enhances the alcohol activation, while the unsaturated Hf⁴⁺, which acts as a Lewis acid site, is able to borrow the hydrogen from the methylene position of benzyl alcohol. This fact makes this material at least 14 times more active for the N-alkylation reaction than the material obtained via solvothermal synthesis. The methodology described in this work could be applied to a wide range of aniline and benzyl alcohol derivates, showing in all cases high selectivity toward the corresponding N-benzylaniline product. Finally, Hf-MOF-808, which acts as a true heterogeneous catalyst, can be reused in at least four consecutive runs without any activity loss.

Palladium and Copper: Advantageous Nanocatalysts for Multi-Step Transformations

Metal nanoparticles have been deeply studied in the last few decades due to their attractive physical and chemical properties, finding a wide range of applications in several fields. Among them, well-defined nano-structures can combine the main advantages of heterogeneous and homogeneous catalysts. Especially, catalyzed multi-step processes for the production of added-value chemicals represent straightforward synthetic methodologies, including tandem and sequential reactions that avoid the purification of intermediate compounds. In particular, palladium- and copper-based nanocatalysts are often applied, becoming a current strategy in the sustainable synthesis of fine chemicals. The rational tailoring of nanosized materials involving both those immobilized on solid supports and liquid phases and their applications in organic synthesis are herein reviewed.

A Novel Synthesis of 2-Arylbenzimidazole and 2-Arylbenzothiazole Derivatives by MnO2/MOF-199

The main objective of this research is to develop efficient and environmentally benign heterogeneous catalysts for synthesis of 2-arylbenzimidazole and 2-arylbenzothiazoles derivatives by MnO2/MOF-199. For this purpose, a heterogeneous MnO2/MOF-199 catalyst was prepared by the solvothermal method, and the prepared catalyst was characterised by various techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), BET, IR, thermogravimetric–differential thermogravimetric (TG-DTG), and temperature-programmed desorption with ammonia (NH3-TPD) analysis. The solid catalyst, with a MnO2/MOF-199 loading of 9%, demonstrated a high catalytic activity in the synthesis of 1,2-arylbenzimidazole and 1,2-arylbenzothiazole derivatives and the catalyst could be reused for at least 5 cycles under mild conditions.

The role of metal–organic porous frameworks in dual catalysis

Metal–organic frameworks (MOFs) are a valuable group of porous crystalline solids with inorganic and organic parts that can be used in dual catalysis.

Pd/APN-Mn(BTC) as novel, highly efficient, and recyclable catalyst for Suzuki–Miyaura cross coupling reaction

A novel, heterogeneous, and bifunctional metal organic framework containing palladium and manganese, Pd/APN-Mn(BTC), has been prepared and completely characterized using FTIR, XRD, SEM-EDS, N2 adsorption–desorption, TG-DTG, NH3-TPD, and ICP analytical techniques. The APN-Mn(BTC) framework has been shown to be a useful platform for the stabilization and support of palladium nanoparticles (Pd NPs). Very effective catalytic activity has been exhibited by the highly dispersed Pd particles, Pd-NPs/APN-Mn(BTC), in the Suzuki–Miyaura cross-coupling reaction with reasonable to excellent reaction yields under mild conditions in H2O–ethanol solvent.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

Metal Organic Frameworks as Robust Host of Palladium Nanoparticles in Heterogeneous Catalysis: Synthesis, Application, and Prospect

Metal organic frameworks (MOFs) are one set of the most excellent supports for Pd nanoparticles (NPs). MOFs as the host mainly have the following advantages: (i) they provide size limits for highly dispersed Pd NPs; (ii) fixing Pd NPs is beneficial for separation and reuse, avoiding the loss of expensive metals; (iii) the MOFs skeleton is diversified and functionalized, which is beneficial to enhancing the interaction with Pd NPs and prolonging the service life of the catalyst. This review discusses the synthesis strategy of Pd@MOF, which provides guidance for the synthesis of similar materials. After that, the research advance of Pd@MOF in heterogeneous catalysis is comprehensively summarized, including C-C coupling reaction, benzyl alcohol oxidation reaction, simple olefin hydrogenation reaction, nitroaromatic compound reduction, tandem reaction, and the photocatalysis, with the emphasis in providing a comparison with the performance of other alternative Pd-containing catalysts. In the final section, this review presents the current challenges and which are the next goals in this field.

Catalysis and photocatalysis by metal organic frameworks

This review aims to provide different strategies employed to use MOFs as solid catalysts and photocatalysts in organic transformations.

Imidazolium-based ionic liquid functionalized reduced graphene oxide supported palladium as a reusable catalyst for Suzuki–Miyaura reactions

Pd supported on ionic liquid functionalized RGO was fabricated as a catalyst and showed excellent performance for Suzuki–Miyaura coupling reactions.

Hollow Pd/MOF Nanosphere with Double Shells as Multifunctional Catalyst for Hydrogenation Reaction

A new type of hollow nanostructure featured double metal-organic frameworks shells with metal nanoparticles (MNPs) is designed and fabricated by the methods of ship in a bottle and bottle around the ship. The nanostructure material, hereinafter denoted as Void@HKUST-1/Pd@ZIF-8, is confirmed by the analyses of photograph, transmission electron microscopy, scanning electron microscopy, powder X-ray diffraction, inductively coupled plasma, and N₂ sorption. It possesses various multifunctionally structural characteristics such as hollow cavity which can improve mass transfer, the adjacent of the inner HKUST-1 shell to the void which enables the matrix of the shell to host and well disperse MNPs, and an outer ZIF-8 shell which acts as protective layer against the leaching of MNPs and a sieve to guarantee molecular-size selectivity. This makes the material eligible candidates for the heterogeneous catalyst. As a proof of concept, the liquid-phase hydrogenation of olefins with different molecular sizes as a model reaction is employed. It demonstrates the efficient catalytic activity and size-selectivity of Void@HKUST-1/Pd@ZIF-8.

Multifunctional metal–organic framework catalysts: synergistic catalysis and tandem reactions

Various active sites incorporated into metal–organic frameworks (MOFs) are suitable for synergistic catalysis and tandem reactions.

Coordination frameworks containing compounds as catalysts

This article describes a collection of MOF containing compounds as catalysts in a diverse range of organic transformation reactions.

The synthesis of a bifunctional copper metal organic framework and its application in the aerobic oxidation/Knoevenagel condensation sequential reaction

A novel one-pot aerobic oxidation/Knoevenagel condensation reaction system was developed employing a Cu(ii)/amine bifunctional, basic metal-organic framework (MOF) as the catalyst. The sequential aerobic alcohol oxidation/Knoevenagel condensation reaction was efficiently promoted by the Cu3TATAT MOF catalyst in the absence of basic additives. The benzylidenemalononitrile product was produced in high yield and selectivity from an inexpensive benzyl alcohol starting material under an oxygen atmosphere. The role of the basic functionality was studied to demonstrate its role in the aerobic oxidation and Knoevenagel condensation reactions. The reaction progress was monitored in order to identify the reaction intermediate and follow the accumulation of the desired product. Lastly, results showed that the yield was not significantly compromised by the reuse of a batch of catalyst, even after more than five cycles.

Application of Ni/Co-based metal–organic frameworks (MOFs) as an advanced electrode material for supercapacitors

A Ni/Co–MOF-based supercapacitor electrode exhibited high specific capacitance, and good rate and cycling performance.

When CuAAC 'Click Chemistry' goes heterogeneous

Within the green chemistry context, heterogeneous catalysis is more and more applied to organic synthesis. The well known ‘click chemistry’ and especially its flagship, the copper-catalyzed azide–alkyne cycloaddition reaction (CuAAC), is now catch up by such heterogenisation process and copper ions or metals have been grafted or deposited on or into various solids, such as (bio)polymers, charcoal, silica, zeolites, POM or MOF.

Porous aromatic frameworks (PAFs) as efficient supports for N-heterocyclic carbene catalysts

Polymeric aromatic frameworks (PAFs), easily obtained from organic platforms, as excellent supports to yield robust well-defined organometallic heterogenized catalysts.

Immobilization of a thiol-functionalized ionic liquid onto HKUST-1 through thiol compounds as the chemical bridge

The IL@HKUST-1 catalyst was synthesized by a post-synthetic modification strategy. The introduction of ionic liquid greatly improved the acidity of the material, making it an efficient and recyclable catalyst for the esterification reaction.

Copper-catalyzed cascade cyclization of 1,5-enynes via consecutive trifluoromethylazidation/diazidation and click reaction: self-assembly of triazole fused isoindolines

We have developed a copper-catalyzed one-pot three-component reaction to provide diverse triazole fused isoindolines bearing a trifluoromethyl/trifluoromethylcyclopropyl or an azidyl moiety via consecutive trifluoromethylazidation/diazidation and click reaction.

Metal-organic frameworks: versatile heterogeneous catalysts for efficient catalytic organic transformations

Novel catalytic materials are highly demanded to perform a variety of catalytic organic reactions. MOFs combine the benefits of heterogeneous catalysis like easy post reaction separation, catalyst reusability, high stability and homogeneous catalysis such as high efficiency, selectivity, controllability and mild reaction conditions. The possible organization of active centers like metallic nodes, organic linkers, and their chemical synthetic functionalization on the nanoscale shows potential to build up MOFs particularly modified for catalytic challenges. In this review, we have summarized the recent research progress in heterogeneous catalysis by MOFs and their catalytic behavior in various organic reactions, highlighting the key features of MOFs as catalysts based on the active sites in the framework. Examples of their post functionalization, inclusion of active guest species and metal nanoparticles have been discussed. Finally, the use of MOFs as catalysts for asymmetric heterogeneous catalysis and stability of MOFs has been presented as separate sections.

Selectfluor-Mediated Synthesis of Isoindoline Fused with Triazoles under Metal-Free Conditions

An efficient selectfluor-mediated cyclisation of 2-arylethynyl-benzyl azides at 80 °C in MeCN yielded 12 arylated triazolo-isoindoline derivatives (seven of which are novel). Products bearing either electron-donating or electron-withdrawing groups on the aromatic ring were formed in comparable yields.