XKCM1 acts on a single protofilament and requires the C terminus of tubulin

Atomic force microscopy reveals distinct protofilament-scale structural dynamics in depolymerizing microtubule arrays

One cannot help but marvel at the precise organization of microtubule polymers in cellular structures such as the axoneme and the spindle. However, our understanding of the biochemical mechanisms that sculpt these arrays comes largely from in vitro experiments with a small number (one or two) of microtubules. This is somewhat akin to studying the architecture of multilane highways by studying one-lane streets. Here, we directly visualize depolymerizing microtubule arrays at individual microtubule and protofilament resolution using atomic force microscopy. Our results reveal differences in microtubule depolymerase activity and provide insights into how these differences in enzymatic activity on the nanometer scale can result in the differential remodeling of multimicrotubule arrays on the micron-length scale.

The dynamic reorganization of microtubule-based cellular structures, such as the spindle and the axoneme, fundamentally depends on the dynamics of individual polymers within multimicrotubule arrays. A major class of enzymes implicated in both the complete demolition and fine size control of microtubule-based arrays are depolymerizing kinesins. How different depolymerases differently remodel microtubule arrays is poorly understood. A major technical challenge in addressing this question is that existing optical or electron-microscopy methods lack the spatial-temporal resolution to observe the dynamics of individual microtubules within larger arrays. Here, we use atomic force microscopy (AFM) to image depolymerizing arrays at single-microtubule and protofilament resolution. We discover previously unseen modes of microtubule array destabilization by conserved depolymerases. We find that the kinesin-13 MCAK mediates asynchronous protofilament depolymerization and lattice-defect propagation, whereas the kinesin-8 Kip3p promotes synchronous protofilament depolymerization. Unexpectedly, MCAK can depolymerize the highly stable axonemal doublets, but Kip3p cannot. We propose that distinct protofilament-level activities underlie the functional dichotomy of depolymerases, resulting in either large-scale destabilization or length regulation of microtubule arrays. Our work establishes AFM as a powerful strategy to visualize microtubule dynamics within arrays and reveals how nanometer-scale substrate specificity leads to differential remodeling of micron-scale cytoskeletal structures.

Ternary complex of Kif2A-bound tandem tubulin heterodimers represents a kinesin-13-mediated microtubule depolymerization reaction intermediate

Kinesin-13 proteins are major microtubule (MT) regulatory factors that catalyze removal of tubulin subunits from MT ends. The class-specific “neck” and loop 2 regions of these motors are required for MT depolymerization, but their contributing roles are still unresolved because their interactions with MT ends have not been observed directly. Here we report the crystal structure of a catalytically active kinesin-13 monomer (Kif2A) in complex with two bent αβ-tubulin heterodimers in a head-to-tail array, providing a view of these interactions. The neck of Kif2A binds to one tubulin dimer and the motor core to the other, guiding insertion of the KVD motif of loop 2 in between them. AMPPNP-bound Kif2A can form stable complexes with tubulin in solution and trigger MT depolymerization. We also demonstrate the importance of the neck in modulating ATP turnover and catalytic depolymerization of MTs. These results provide mechanistic insights into the catalytic cycles of kinesin-13.

The kinesin-13 family of microtubule (MT) depolymerases are major regulators of MT dynamics. Here the authors provide insights into the MT depolymerization mechanism by solving the crystal structure of a kinesin-13 monomer (Kif2A) in complex with two bent αβ-tubulin heterodimers.

Mechanism of Catalytic Microtubule Depolymerization via KIF2-Tubulin Transitional Conformation

Microtubules (MTs) are dynamic structures that are fundamental for cell morphogenesis and motility. MT-associated motors work efficiently to perform their functions. Unlike other motile kinesins, KIF2 catalytically depolymerizes MTs from the peeled protofilament end during ATP hydrolysis. However, the detailed mechanism by which KIF2 drives processive MT depolymerization remains unknown. To elucidate the catalytic mechanism, the transitional KIF2-tubulin complex during MT depolymerization was analyzed through multiple methods, including atomic force microscopy, size-exclusion chromatography, multi-angle light scattering, small-angle X-ray scattering, analytical ultracentrifugation, and mass spectrometry. The analyses outlined the conformation in which one KIF2core domain binds tightly to two tubulin dimers in the middle pre-hydrolysis state during ATP hydrolysis, a process critical for catalytic MT depolymerization. The X-ray crystallographic structure of the KIF2core domain displays the activated conformation that sustains the large KIF2-tubulin 1:2 complex.

β-tubulin carboxy-terminal tails exhibit isotype-specific effects on microtubule dynamics in human gene-edited cells

This study used human gene-edited cell models and image analysis to reveal that the tubulin C-terminal tails specifically regulate the dynamics of individual microtubules and coordinate microtubule behavior across the cell.

Microtubules are highly dynamic structures that play an integral role in fundamental cellular functions. Different α- and β-tubulin isotypes are thought to confer unique dynamic properties to microtubules. The tubulin isotypes have highly conserved structures, differing mainly in their carboxy-terminal (C-terminal) tail sequences. However, little is known about the importance of the C-terminal tail in regulating and coordinating microtubule dynamics. We developed syngeneic human cell models using gene editing to precisely modify the β-tubulin C-terminal tail region while preserving the endogenous microtubule network. Fluorescent microscopy of live cells, coupled with advanced image analysis, revealed that the β-tubulin C-terminal tails differentially coordinate the collective and individual dynamic behavior of microtubules by affecting microtubule growth rates and explorative microtubule assembly in an isotype-specific manner. Furthermore, βI- and βIII-tubulin C-terminal tails differentially regulate the sensitivity of microtubules to tubulin-binding agents and the microtubule depolymerizing protein mitotic centromere-associated kinesin. The sequence of the β-tubulin tail encodes regulatory information that instructs and coordinates microtubule dynamics, thereby fine-tuning microtubule dynamics to support cellular functions.

Dynamics of microtubules: highlights of recent computational and experimental investigations

Microtubules are found in most eukaryotic cells, with homologs in eubacteria and archea, and they have functional roles in mitosis, cell motility, intracellular transport, and the maintenance of cell shape. Numerous efforts have been expended over the last two decades to characterize the interactions between microtubules and the wide variety of microtubule associated proteins that control their dynamic behavior in cells resulting in microtubules being assembled and disassembled where and when they are required by the cell. We present the main findings regarding microtubule polymerization and depolymerization and review recent work about the molecular motors that modulate microtubule dynamics by inducing either microtubule depolymerization or severing. We also discuss the main experimental and computational approaches used to quantify the thermodynamics and mechanics of microtubule filaments.

Insight into microtubule disassembly by kinesin-13s from the structure of Kif2C bound to tubulin

Kinesin-13s are critical microtubule regulators which induce microtubule disassembly in an ATP dependent manner. To clarify their mechanism, we report here the crystal structure of a functional construct of the kinesin-13 Kif2C/MCAK in an ATP-like state and bound to the αβ-tubulin heterodimer, a complex mimicking the species that dissociates from microtubule ends during catalytic disassembly. Our results picture how Kif2C stabilizes a curved tubulin conformation. The Kif2C α4-L12-α5 region undergoes a remarkable 25° rotation upon tubulin binding to target the αβ-tubulin hinge. This movement leads the β5a–β5b motif to interact with the distal end of β-tubulin, whereas the neck and the KVD motif, two specific elements of kinesin-13s, target the α-tubulin distal end. Taken together with the study of Kif2C mutants, our data suggest that stabilization of a curved tubulin is an important contribution to the Kif2C mechanism.

Kinesin-13s are microtubule depolymerizing enzymes. Here the authors present the crystal structure of a DARPin fused construct comprising the short neck region and motor domain of kinesin-13 in complex with an αβ-tubulin heterodimer, which shows that kinesin-13 functions by stabilizing a curved tubulin conformation.

Distinct Interaction Modes of the Kinesin-13 Motor Domain with the Microtubule

Kinesins-13s are members of the kinesin superfamily of motor proteins that depolymerize microtubules (MTs) and have no motile activity. Instead of generating unidirectional movement over the MT lattice, like most other kinesins, kinesins-13s undergo one-dimensional diffusion (ODD) and induce depolymerization at the MT ends. To understand the mechanism of ODD and the origin of the distinct kinesin-13 functionality, we used ensemble and single-molecule fluorescence polarization microscopy to analyze the behavior and conformation of Drosophila melanogaster kinesin-13 KLP10A protein constructs bound to the MT lattice. We found that KLP10A interacts with the MT in two coexisting modes: one in which the motor domain binds with a specific orientation to the MT lattice and another where the motor domain is very mobile and able to undergo ODD. By comparing the orientation and dynamic behavior of mutated and deletion constructs we conclude that 1) the Kinesin-13 class specific neck domain and loop-2 help orienting the motor domain relative to the MT. 2) During ODD the KLP10A motor-domain changes orientation rapidly (rocks or tumbles). 3) The motor domain alone is capable of undergoing ODD. 4) A second tubulin binding site in the KLP10A motor domain is not critical for ODD. 5) The neck domain is not the element preventing KLP10A from binding to the MT lattice like motile kinesins.

The C-terminal region of the motor protein MCAK controls its structure and activity through a conformational switch

The precise regulation of microtubule dynamics is essential during cell division. The kinesin-13 motor protein MCAK is a potent microtubule depolymerase. The divergent non-motor regions flanking the ATPase domain are critical in regulating its targeting and activity. However, the molecular basis for the function of the non-motor regions within the context of full-length MCAK is unknown. Here, we determine the structure of MCAK motor domain bound to its regulatory C-terminus. Our analysis reveals that the MCAK C-terminus binds to two motor domains in solution and is displaced allosterically upon microtubule binding, which allows its robust accumulation at microtubule ends. These results demonstrate that MCAK undergoes long-range conformational changes involving its C-terminus during the soluble to microtubule-bound transition and that the C-terminus-motor interaction represents a structural intermediate in the MCAK catalytic cycle. Together, our work reveals intrinsic molecular mechanisms underlying the regulation of kinesin-13 activity.

DOI:http://dx.doi.org/10.7554/eLife.06421.001

Within a cell, there is a scaffold-like structure called the cytoskeleton that provides shape and structural support, and acts as a transport network for the movement of molecules around the cell. This scaffold contains highly dynamic polymers called microtubules that are made from a protein called tubulin. The constant growth and shrinking of the ends of the microtubules is essential to rebuild and adapt the cytoskeleton according to the needs of the cell.

A protein called MCAK belongs to a family of motor proteins that can move along microtubules. It generally binds to the ends of the microtubules to shorten them. Previous studies have found that a single MCAK protein binds to another MCAK protein to form a larger molecule known as a dimer. Part of the MCAK protein forms a so-called motor domain, which enables this protein to bind to the microtubules. One end of the protein, known as the C-terminus, controls the activity of this motor domain. However, it is not clear how this works.

Talapatra et al. have now revealed the three-dimensional structure of MCAK's motor domain with the C-terminus using a technique called X-ray crystallography. The experiments show that the C-terminus binds to the motor domain, which promotes the formation of the dimers. A short stretch of amino acids—the building blocks of proteins—in the C-terminus interacts with two motor molecules. This ‘motif’ is also found in other similar proteins from a variety of animals. However, once MCAK binds to a microtubule, the microtubule triggers the release of the C-terminus from the motor domain. This allows MCAK to bind more strongly to the microtubule.

The experiments also show that the binding of the C-terminus to the motor domain alters the ability of MCAK to associate with microtubules, which encourages the protein to reach the ends of the polymers. Future work is required to see whether other motor proteins work in a similar way.

DOI:http://dx.doi.org/10.7554/eLife.06421.002

The molecular basis for kinesin functional specificity during mitosis

Microtubule-based motor proteins play key roles during mitosis to assemble the bipolar spindle, define the cell division axis, and align and segregate the chromosomes. The majority of mitotic motors are members of the kinesin superfamily. Despite sharing a conserved catalytic core, each kinesin has distinct functions and localization, and is uniquely regulated in time and space. These distinct behaviors and functional specificity are generated by variations in the enzymatic domain as well as the non-conserved regions outside of the kinesin motor domain and the stalk. These flanking regions can directly modulate the properties of the kinesin motor through dimerization or self-interactions, and can associate with extrinsic factors, such as microtubule or DNA binding proteins, to provide additional functional properties. This review discusses the recently identified molecular mechanisms that explain how the control and functional specification of mitotic kinesins is achieved. © 2013 Wiley Periodicals, Inc.

Microtubule-depolymerizing kinesins

The microtubule (MT) cytoskeleton supports a broad range of cellular functions, from providing tracks for intracellular transport, to supporting movement of cilia and flagella, to segregating chromosomes in mitosis. These functions are facilitated by the organizational and dynamic plasticity of MT networks. An important class of enzymes that alters MT dynamics is the depolymerizing kinesin-like proteins, which use their catalytic activities to regulate MT end dynamics. In this review, we discuss four topics surrounding these MT-depolymerizing kinesins. We provide a historical overview of studies focused on these motors and discuss their phylogeny. In the second half, we discuss their enzymology and biophysics and give an overview of their known cellular functions. This discussion highlights the fact that MT-depolymerizing kinesins exhibit a diverse range of design principles, which in turn increases their functional versatility in cells.

Stabilization of actin filaments prevents germinal vesicle breakdown and affects microtubule organization in Xenopus oocytes

In Xenopus oocytes, extremely giant nuclei, termed germinal vesicles, contain a large amount of actin filaments most likely for mechanical integrity. Here, we show that microinjection of phalloidin, an F-actin-stabilizing drug, prevents the germinal vesicle breakdown (GVBD) in oocytes treated with progesterone. These nuclei remained for more 12 h after control oocytes underwent GVBD. Immunostaining showed significant elevation of actin in the remaining nuclei and many actin filament bundles in the cytoplasm. Furthermore, microtubules formed unusual structures in both nuclei and cytoplasm of phalloidin-injected oocytes stimulated by progesterone. Cytoplasmic microtubule arrays and intranuclear microtubules initially formed in phalloidin-injected oocytes as control oocytes exhibited white maturation spots; these structures gradually disappeared and finally converged upon intranuclear short bundles when control oocytes completed maturation. In contrast, treatment of oocytes with jasplakinolide, a cell membrane-permeable actin filament-stabilizing drug, did not affect GVBD. This drug preferentially induced accumulation of actin filaments at the cortex without any increase in cytoplasmic actin staining. Based on these results, intranuclear and cytoplasmic actin filament dynamics appear to be required for the completion of GVBD and critically involved in the regulation of microtubule assembly during oocyte maturation in Xenopus laevis.

Mitotic centromere-associated kinesin (MCAK): a potential cancer drug target

The inability to faithfully segregate chromosomes in mitosis results in chromosome instability, a hallmark of solid tumors. Disruption of microtubule dynamics contributes highly to mitotic chromosome instability. The kinesin-13 family is critical in the regulation of microtubule dynamics and the best characterized member of the family, the mitotic centromere-associated kinesin (MCAK), has recently been attracting enormous attention. MCAK regulates microtubule dynamics as a potent depolymerizer of microtubules by removing tubulin subunits from the polymer end. This depolymerizing activity plays pivotal roles in spindle formation, in correcting erroneous attachments of microtubule-kinetochore and in chromosome movement. Thus, the accurate regulation of MCAK is important for ensuring the faithful segregation of chromosomes in mitosis and for safeguarding chromosome stability. In this review we summarize recent data concerning the regulation of MCAK by mitotic kinases, Aurora A/B, Polo-like kinase 1 and cyclin-dependent kinase 1. We propose a molecular model of the regulation of MCAK by these mitotic kinases and relevant phosphatases throughout mitosis. An ever-increasing quantity of data indicates that MCAK is aberrantly regulated in cancer cells. This deregulation is linked to increased malignance, invasiveness, metastasis and drug resistance, most probably due to increased chromosomal instability and remodeling of the microtubule cytoskeleton in cancer cells. Most interestingly, recent observations suggest that MCAK could be a novel molecular target for cancer therapy, as a new cancer antigen or as a mitotic regulator. This collection of new data indicates that MCAK could be a new star in the cancer research sky due to its critical roles in the control of genome stability and the cytoskeleton. Further investigations are required to dissect the fine details of the regulation of MCAK throughout mitosis and its involvements in oncogenesis.

Regulation of microtubule dynamics by kinesins

The simple mechanistic and functional division of the kinesin family into either active translocators or non-motile microtubule depolymerases was initially appropriate but is now proving increasingly unhelpful, given evidence that several translocase kinesins can affect microtubule dynamics, whilst non-translocase kinesins can promote microtubule assembly and depolymerisation. Such multi-role kinesins act either directly on microtubule dynamics, by interaction with microtubules and tubulin, or indirectly, through the transport of other factors along the lattice to the microtubule tip. Here I review recent progress on the mechanisms and roles of these translocase kinesins.

The kinesin-13 MCAK has an unconventional ATPase cycle adapted for microtubule depolymerization

Most kinesins move directionally along microtubules, but MCAK instead depolymerizes them. This study analyses the ATPase cycle of MCAK, identifying unusual kinetic features that fit with its unconventional activity.

Unlike other kinesins, members of the kinesin-13 subfamily do not move directionally along microtubules but, instead, depolymerize them. To understand how kinesins with structurally similar motor domains can have such dissimilar functions, we elucidated the ATP turnover cycle of the kinesin-13, MCAK. In contrast to translocating kinesins, ATP cleavage, rather than product release, is the rate-limiting step for ATP turnover by MCAK; unpolymerized tubulin and microtubules accelerate this step. Further, microtubule ends fully activate the ATPase by accelerating the exchange of ADP for ATP. This tuning of the cycle adapts MCAK for its depolymerization activity: lattice-stimulated ATP cleavage drives MCAK into a weakly bound nucleotide state that reaches microtubule ends by diffusion, and end-specific acceleration of nucleotide exchange drives MCAK into a strongly bound state that promotes depolymerization. This altered cycle accounts well for the different mechanical behaviour of this kinesin, which depolymerizes microtubules from their ends, compared to translocating kinesins that walk along microtubules. Thus, the kinesin motor domain is a nucleotide-dependent engine that can be differentially tuned for transport or depolymerization functions.

Parvulin 17 promotes microtubule assembly by its peptidyl-prolyl cis/trans isomerase activity

The parvulin-type peptidyl-prolyl cis/trans isomerases (PPIases) have been shown to be involved in tumor progression and the pathogenesis of Alzheimer's disease and were therefore a subject of intense research. Here, we describe a role for parvulin 17 in microtubule assembly. Co-precipitation experiments and sedimentation assays demonstrated that parvulin 17 interacts with tubulin in a GTP-dependent manner and thereby promotes the formation of microtubules, as shown by transmission electron microscopy and a microtubule polymerization assay. The microtubule-assembly-promoting properties of parvulin 17 seem to depend on its PPIase activity. Thus, catalytic deficient variants of parvulin 17 were not able to promote microtubule formation. Accordingly, inhibitors of parvulin 17 activity also prevent parvulin-catalyzed tubulin polymerization. The analysis of tubulin interaction sites on parvulin using peptide microarrays revealed that tubulin interacts with the substrate binding pocket of parvulin. Additionally, β-tubulin peptide scan on microarrays demonstrates interaction of parvulin 17 with an Arg-Pro-Asp motif corresponding to proline residue 87 of β-tubulin. Confocal laser scanning microscopy points to a function of parvulin 17 in microtubule dynamics as well. Parvulin 17 is predominantly found in the cytosol and colocalizes with microtubules.

Kinesin-13s in mitosis: Key players in the spatial and temporal organization of spindle microtubules

Dynamic microtubules are essential for the process of mitosis. Thus, elucidating when, where, and how microtubule dynamics are regulated is key to understanding this process. One important class of proteins that directly regulates microtubule dynamics is the Kinesin-13 family. Kinesin-13 proteins induce depolymerization uniquely from both ends of the microtubule. This activity coincides with their cellular localization and with their ability to regulate microtubule dynamics to control spindle assembly and kinetochore-microtubule attachments. In this review, we highlight recent findings that dissect the important actions of Kinesin-13 family members and summarize important studies on the regulation of their activity by phosphorylation and by protein-protein interactions.

A new model for binding of kinesin 13 to curved microtubule protofilaments

Kinesin motor proteins use adenosine triphosphate hydrolysis to do work on microtubules (MTs). Most kinesins walk along the MT, but class 13 kinesins instead uniquely recognize MT ends and depolymerize MT protofilaments. We have used electron microscopy (EM) to understand the molecular interactions by which kinesin 13 performs these tasks. Although a construct of only the motor domain of kinesin 13 binds to every heterodimer of a tubulin ring, a construct containing the neck and the motor domain occupies alternate binding sites. Likewise, EM maps of the dimeric full-length (FL) protein exhibit alternate site binding but reveal density for only one of two motor heads. These results indicate that the second head of dimeric kinesin 13 does not have access to adjacent binding sites on the curved protofilament and suggest that the neck alone is sufficient to obstruct access. Additionally, the FL construct promotes increased stacking of rings compared with other constructs. Together, these data suggest a model for kinesin 13 depolymerization in which increased efficiency is achieved by binding of one kinesin 13 molecule to adjacent protofilaments.

Molecular basis for class V beta-tubulin effects on microtubule assembly and paclitaxel resistance

Vertebrates produce at least seven distinct beta-tubulin isotypes that coassemble into all cellular microtubules. The functional differences among these tubulin isoforms are largely unknown, but recent studies indicate that tubulin composition can affect microtubule properties and cellular microtubule-dependent behavior. One of the isotypes whose incorporation causes the largest change in microtubule assembly is beta5-tubulin. Overexpression of this isotype can almost completely destroy the microtubule network, yet it appears to be required in smaller amounts for normal mitotic progression. Moderate levels of overexpression can also confer paclitaxel resistance. Experiments using chimeric constructs and site-directed mutagenesis now indicate that the hypervariable C-terminal region of beta5 plays no role in these phenotypes. Instead, we demonstrate that two residues found in beta5 (Ser-239 and Ser-365) are each sufficient to inhibit microtubule assembly and confer paclitaxel resistance when introduced into beta1-tubulin; yet the single mutation of residue Ser-239 in beta5 eliminates its ability to confer these phenotypes. Despite the high degree of conservation among beta-tubulin isotypes, mutations affecting residue 365 demonstrate that amino acid substitutions can be context sensitive; i.e. an amino acid change in one isotype will not necessarily produce the same phenotype when introduced into a different isotype. Modeling studies indicate that residue Cys-239 of beta1-tubulin is close to a highly conserved Cys-354 residue suggesting the possibility that disulfide formation could play a significant role in the stability of microtubules formed with beta1- but not with beta5-tubulin.

Straight GDP-tubulin protofilaments form in the presence of taxol

Microtubules exist in dynamic equilibrium, growing and shrinking by the addition or loss of tubulin dimers from the ends of protofilaments. The hydrolysis of GTP in beta-tubulin destabilizes the microtubule lattice by increasing the curvature of protofilaments in the microtubule and putting strain on the lattice. The observation that protofilament curvature depends on GTP hydrolysis suggests that microtubule destabilizers and stabilizers work by modulating the curvature of the microtubule lattice itself. Indeed, the microtubule destabilizer MCAK has been shown to increase the curvature of protofilaments during depolymerization. Here, we show that the atomic force microscopy (AFM) of individual tubulin protofilaments provides sufficient resolution to allow the imaging of single protofilaments in their native environment. By using this assay, we confirm previous results for the effects of GTP hydrolysis and MCAK on the conformation of protofilaments. We go on to show that taxol stabilizes microtubules by straightening the GDP protofilament and slowing down the transition of protofilaments from straight to a curved configuration.

Lucky 13-microtubule depolymerisation by kinesin-13 motors

The kinesin-13 class of motors catalyses microtubule depolymerisation by bending tubulins at microtubule ends. Depolymerisation activity is intrinsic to the kinesin-13 motor core but the activity of the core alone is very low compared with that of constructs that also contain a conserved neck sequence. The full-length dimeric motor is an efficient depolymeriser and also diffuses along the microtubule lattice, which helps it to find microtubule ends. Current evidence supports the idea of a generic mechanism for kinesin-13-catalysed depolymerisation. However, the activity of kinesin-13 motors is precisely localised and regulated in vivo to enable a wide range of cellular roles. The proteins are involved in global control of microtubule dynamics. They also localise to mitotic and meiotic spindles, where they contribute to formation and maintenance of spindle bipolarity, chromosomal congression, attachment correction and chromatid separation. In interphase cells, intricate and subtle mechanisms appear to allow kinesin-13 motors to act on specific populations of microtubules. Such carefully controlled localisation and regulation makes these kinesins efficient, multi-tasking molecular motors.

The interplay of the N- and C-terminal domains of MCAK control microtubule depolymerization activity and spindle assembly

Spindle assembly and accurate chromosome segregation require the proper regulation of microtubule dynamics. MCAK, a Kinesin-13, catalytically depolymerizes microtubules, regulates physiological microtubule dynamics, and is the major catastrophe factor in egg extracts. Purified GFP-tagged MCAK domain mutants were assayed to address how the different MCAK domains contribute to in vitro microtubule depolymerization activity and physiological spindle assembly activity in egg extracts. Our biochemical results demonstrate that both the neck and the C-terminal domain are necessary for robust in vitro microtubule depolymerization activity. In particular, the neck is essential for microtubule end binding, and the C-terminal domain is essential for tight microtubule binding in the presence of excess tubulin heterodimer. Our physiological results illustrate that the N-terminal domain is essential for regulating microtubule dynamics, stimulating spindle bipolarity, and kinetochore targeting; whereas the C-terminal domain is necessary for robust microtubule depolymerization activity, limiting spindle bipolarity, and enhancing kinetochore targeting. Unexpectedly, robust MCAK microtubule (MT) depolymerization activity is not needed for sperm-induced spindle assembly. However, high activity is necessary for proper physiological MT dynamics as assayed by Ran-induced aster assembly. We propose that MCAK activity is spatially controlled by an interplay between the N- and C-terminal domains during spindle assembly.

A driving and coupling "Pac-Man" mechanism for chromosome poleward translocation in anaphase A

During mitosis, chromatid harnesses its kinetochore translocation at the depolymerizing microtubule ends for its poleward movement in anaphase A. The force generation mechanism for such movement remains unknown. Analysis of the current experimental results shows that the bending energy release from the bound tubulin subunits alone cannot provide sufficient driving force. Additional contribution from effective electrostatic attractions between the kinetochore and the microtubule is needed for kinetochore translocation. Interestingly, as the kinetochore moves to inside the microtubule, the microtubule tip is free to bend outward so that the instantaneous distance between the kinetochore and the microtubule tip is much closer than the rest of the microtubule. This close contact yields much larger electrostatic attraction than that from the rest of the microtubule under physiological ionic conditions. As a result, the effective electrostatic interaction hinders the further kinetochore poleward translocation until the microtubule tip dissociates. Thus, the kinetochore translocation is strongly coupled at the depolymerizing microtubule end. This driving-coupling mechanism indicates that the kinetochore velocity is largely controlled by the microtubule dissociation rate, which explains the insensitivity of kinetochore velocity to its viscous drag and the large redundancy in its stalling force.

Stu2p binds tubulin and undergoes an open-to-closed conformational change

Stu2p from budding yeast belongs to the conserved Dis1/XMAP215 family of microtubule-associated proteins (MAPs). The common feature of proteins in this family is the presence of HEAT repeat–containing TOG domains near the NH₂ terminus. We have investigated the functions of the two TOG domains of Stu2p in vivo and in vitro. Our data suggest that Stu2p regulates microtubule dynamics through two separate activities. First, Stu2p binds to a single free tubulin heterodimer through its first TOG domain. A large conformational transition in homodimeric Stu2p from an open structure to a closed one accompanies the capture of a single free tubulin heterodimer. Second, Stu2p has the capacity to associate directly with microtubule ends, at least in part, through its second TOG domain. These two properties lead to the stabilization of microtubules in vivo, perhaps by the loading of tubulin dimers at microtubule ends. We suggest that this mechanism of microtubule regulation is a conserved feature of the Dis1/XMAP215 family of MAPs.

Microtubules: forgotten players in the apoptotic execution phase

A cell entering the execution phase of apoptosis (regulated cell death) undergoes characteristic rearrangements, in which the cytoskeleton has major roles. Historically, this reorganisation has been attributed entirely to actomyosin contractility, with microtubule and intermediate filament systems both reported to be lost at an early stage. However, recent results indicate that microtubule networks re-form during the later stages of apoptosis and assist in the dispersal of nuclear and cellular fragments--steps that are thought to be important for preventing inflammation. Here, we discuss the roles of the cytoskeleton during apoptosis and challenge current thinking that actin is the sole functional component driving all major execution phase events.

The depolymerizing kinesin MCAK uses lattice diffusion to rapidly target microtubule ends

The microtubule cytoskeleton is a dynamic structure in which the lengths of the microtubules are tightly regulated. One regulatory mechanism is the depolymerization of microtubules by motor proteins in the kinesin-13 family. These proteins are crucial for the control of microtubule length in cell division, neuronal development and interphase microtubule dynamics. The mechanism by which kinesin-13 proteins depolymerize microtubules is poorly understood. A central question is how these proteins target to microtubule ends at rates exceeding those of standard enzyme-substrate kinetics. To address this question we developed a single-molecule microscopy assay for MCAK, the founding member of the kinesin-13 family. Here we show that MCAK moves along the microtubule lattice in a one-dimensional (1D) random walk. MCAK-microtubule interactions were transient: the average MCAK molecule diffused for 0.83 s with a diffusion coefficient of 0.38 microm2 s(-1). Although the catalytic depolymerization by MCAK requires the hydrolysis of ATP, we found that the diffusion did not. The transient transition from three-dimensional diffusion to 1D diffusion corresponds to a "reduction in dimensionality" that has been proposed as the search strategy by which DNA enzymes find specific binding sites. We show that MCAK uses this strategy to target to both microtubule ends more rapidly than direct binding from solution.

Analysis of kinesin motor function at budding yeast kinetochores

Accurate chromosome segregation during mitosis requires biorientation of sister chromatids on the microtubules (MT) of the mitotic spindle. Chromosome–MT binding is mediated by kinetochores, which are multiprotein structures that assemble on centromeric (CEN) DNA. The simple CENs of budding yeast are among the best understood, but the roles of kinesin motor proteins at yeast kinetochores have yet to be determined, despite evidence of their importance in higher eukaryotes. We show that all four nuclear kinesins in Saccharomyces cerevisiae localize to kinetochores and function in three distinct processes. Kip1p and Cin8p, which are kinesin-5/BimC family members, cluster kinetochores into their characteristic bilobed metaphase configuration. Kip3p, a kinesin-8,-13/KinI kinesin, synchronizes poleward kinetochore movement during anaphase A. The kinesin-14 motor Kar3p appears to function at the subset of kinetochores that become detached from spindle MTs. These data demonstrate roles for structurally diverse motors in the complex processes of chromosome segregation and reveal important similarities and intriguing differences between higher and lower eukaryotes.

Multiple tubulin forms in ciliated protozoan Tetrahymena and Paramecium species

Tetrahymena and Paramecium species are widely used representatives of the phylum Ciliata. Ciliates are particularly suitable model organisms for studying the functional heterogeneity of tubulins, since they provide a wide range of different microtubular structures in a single cell. Sequencing projects of the genomes of members of these two genera are in progress. Nearly all members of the tubulin superfamily (alpha-, beta-, gamma-, delta-, epsilon-, eta-, theta-, iota-, and kappa-tubulins) have been identified in Paramecium tetraurelia. In Tetrahymena spp., the functional consequences of different posttranslational tubulin modifications (acetylation, tyrosination and detyrosination, phosphorylation, glutamylation, and glycylation) have been studied by different approaches. These model organisms provide the opportunity to determine the function of tubulins found in ciliates, as well as in humans, but absent in some other model organisms. They also give us an opportunity to explore the mechanisms underlying microtubule diversity. Here we review current knowledge concerning the diversity of microtubular structures, tubulin genes, and posttranslational modifications in Tetrahymena and Paramecium species.

Cik1 targets the minus-end kinesin depolymerase kar3 to microtubule plus ends

Kar3, a Saccharomyces cerevisiae Kinesin-14, is essential for karyogamy and meiosis I but also has specific functions during vegetative growth. For its various roles, Kar3 forms a heterodimer with either Cik1 or Vik1, both of which are noncatalytic polypeptides. Here, we present the first biochemical characterization of Kar3Cik1, the kinesin motor that is essential for karyogamy. Kar3Cik1 depolymerizes microtubules from the plus end and promotes robust minus-end-directed microtubule gliding. Immunolocalization studies show that Kar3Cik1 binds preferentially to one end of the microtubule, whereas the Kar3 motor domain, in the absence of Cik1, exhibits significantly higher microtubule lattice binding. Kar3Cik1-promoted microtubule depolymerization requires ATP turnover, and the kinetics fit a single exponential function. The disassembly mechanism is not microtubule catastrophe like that induced by the MCAK Kinesin-13s. Soluble tubulin does not activate the ATPase activity of Kar3Cik1, and there is no evidence of Kar3Cik1(.)tubulin complex formation as observed for MCAK. These results reveal a novel mechanism to regulate microtubule depolymerization. We propose that Cik1 targets Kar3 to the microtubule plus end. Kar3Cik1 then uses its minus-end-directed force to depolymerize microtubules from the plus end, with each tubulin-subunit release event tightly coupled to one ATP turnover.

Cytoskeletal Transport in the Aging Brain: Focus on the Cholinergic System

There is now compelling evidence for the aging-related breakdown of cytoskeletal support in neurons. Similarly affected are the principal components of the intracellular microtubule system, the transport units involved in active shuttle of organelles and molecules in an antero- and retrograde manner, and the proteins stabilizing the cytoskeleton and providing trophic support. Here, we review the basic organization of the cytoskeleton, and describe its elements and their interactions. We then critically assess the role of these cytoskeletal proteins in physiological aging and aging-related malfunction. Our focus is on the microtubule-associated protein tau, for which comprehensive investigations suggest a critical role in neurodegenerative diseases, for instance tauopathies. These diseases frequently lead to cognitive decline and are often paralleled by reductions in cholinergic neurotransmission. We propose this reduction to be due to destabilization of the cytoskeleton and protein transport mechanisms in these neurons. Therefore, maintenance of the neuronal cytoskeleton during aging may prevent or delay neurodegeneration as well as cognitive decline during physiological aging.

Full-length dimeric MCAK is a more efficient microtubule depolymerase than minimal domain monomeric MCAK

MCAK belongs to the Kinesin-13 family, whose members depolymerize microtubules rather than translocate along them. We defined the minimal functional unit of MCAK as the catalytic domain plus the class specific neck (MD-MCAK), which is consistent with previous reports. We used steady-state ATPase kinetics, microtubule depolymerization assays, and microtubule.MCAK cosedimentation assays to compare the activity of full-length MCAK, which is a dimer, with MD-MCAK, which is a monomer. Full-length MCAK exhibits higher ATPase activity, more efficient microtubule end binding, and reduced affinity for the tubulin heterodimer. Our studies suggest that MCAK dimerization is important for its catalytic cycle by promoting MCAK binding to microtubule ends, enhancing the ability of MCAK to recycle for multiple rounds of microtubule depolymerization, and preventing MCAK from being sequestered by tubulin heterodimers.

Microtubules: Kar3 Eats up the Track

Molecular motors are quintessential bio-machines found throughout phylogeny. A new application of in vitro assays highlights an unexpected dual functionality for the motor domain of the microtubule-based kinesin-14 type motor protein from budding yeast.

The mechanism, function and regulation of depolymerizing kinesins during mitosis

Kinesins are motor proteins that use the hydrolysis of ATP to do mechanical work. Most of these motors translocate cargo along the surface of the microtubule (MT). However, a subfamily of these motors (Kin-I kinesins) can destabilize MTs directly from their ends. This distinct ability makes their activity crucial during mitosis, when reordering of the MT cytoskeleton is most evident. Recently, much work has been done to elucidate the structure and mechanism of depolymerizing kinesins, particularly those of the mammalian kinesin mitotic centromere-associated kinesin (MCAK). In addition, new regulatory factors have been discovered that shed light on the regulation and precise role of Kin-I kinesins during mitosis.

Microtubule-associated proteins and their essential roles during mitosis

Microtubules play essential roles during mitosis, including chromosome capture, congression, and segregation. In addition, microtubules are also required for successful cytokinesis. At the heart of these processes is the ability of microtubules to do work, a property that derives from their intrinsic dynamic behavior. However, if microtubule dynamics were not properly regulated, it is certain that microtubules alone could not accomplish any of these tasks. In vivo, the regulation of microtubule dynamics is the responsibility of microtubule-associated proteins. Among these, we can distinguish several classes according to their function: (1) promotion and stabilization of microtubule polymerization, (2) destabilization or severance of microtubules, (3) functioning as linkers between various structures, or (4) motility-related functions. Here we discuss how the various properties of microtubule-associated proteins can be used to assemble an efficient mitotic apparatus capable of ensuring the bona fide transmission of the genetic information in animal cells.

Kin I kinesins: insights into the mechanism of depolymerization

Kin I kinesins are members of the diverse kinesin superfamily of molecular motors. Whereas most kinesins use ATP to move along microtubules, Kin I kinesins depolymerize microtubules rather than walk along them. Functionally, this distinct subfamily of kinesins is important in regulating cellular microtubule dynamics and plays a crucial role in spindle assembly and chromosome segregation. The molecular mechanism of Kin I-induced microtubule destabilization is as yet unclear. It is generally believed that Kin Is induce a structural change on the microtubule that leads to microtubule destabilization. Recently, much progress has been made towards understanding how Kin Is may cause this structural change, and how ATPase activity is employed in the catalytic cycle.

Interactions of tobacco microtubule-associated protein MAP65-1b with microtubules

Tobacco microtubule associated protein (MAP65) (NtMAP65s) constitute a family of microtubule-associated proteins with apparent molecular weight around 65 kDa that collectively induce microtubule bundling and promote microtubule assembly in vitro. They are associated with most of the tobacco microtubule arrays in situ. Recently, three NtMAP65s belonging to the NtMAP65-1 subfamily have been cloned. Here we investigated in vitro the biochemical properties of one member of this family, the tobacco NtMAP65-1b. We demonstrated that recombinant NtMAP65-1b is a microtubule-binding and a microtubule-bundling protein. NtMAP65-1b has no effect on microtubule polymerization rate and binds microtubules with an estimated equilibrium constant of dissociation (K(d)) of 0.57 micro m. Binding of NtMAP65-1b to microtubules occurs through the carboxy-terminus of tubulin, as NtMAP65-1b was no longer able to bind subtilisin-digested tubulin. In vitro, NtMAP65-1b stabilizes microtubules against depolymerization induced by cold, but not against katanin-induced destabilization. The biological implications of these results are discussed.

A common mechanism for microtubule destabilizers-M type kinesins stabilize curling of the protofilament using the class-specific neck and loops

Unlike other kinesins, middle motor domain-type kinesins depolymerize the microtubule from its ends. To elucidate its mechanism, we solved the X-ray crystallographic structure of KIF2C, a murine member of this family. Three major class-specific features were identified. The class-specific N-terminal neck adopts a long and rigid helical structure extending out vertically into the interprotofilament groove. This structure explains its dual roles in targeting to the end of the microtubule and in destabilization of the lateral interaction of the protofilament. The loop L2 forms a unique finger-like structure, long and rigid enough to reach the next tubulin subunit to stabilize the peeling of the protofilament. The open conformation of the switch I loop could be reversed by the shift of the microtubule binding L8 loop, suggesting its role as the sensor to trigger ATP hydrolysis. Mutational analysis supports these structural implications.

Catastrophic kinesins: piecing together their mechanism by 3D reconstruction

Kin Is, kinesins with an internal catalytic domain, de-polymerize microtubules from both ends, and the KIF2C crystal structure presented by ([this issue of Cell]) provides provocative evidence to support the theory that the highly conserved sequences are critical structural elements in these catastrophic kinesins.

Aurora B regulates MCAK at the mitotic centromere

Chromosome orientation and alignment within the mitotic spindle requires the Aurora B protein kinase and the mitotic centromere-associated kinesin (MCAK). Here, we report the regulation of MCAK by Aurora B. Aurora B inhibited MCAK's microtubule depolymerizing activity in vitro, and phospho-mimic (S/E) mutants of MCAK inhibited depolymerization in vivo. Expression of either MCAK (S/E) or MCAK (S/A) mutants increased the frequency of syntelic microtubule-kinetochore attachments and mono-oriented chromosomes. MCAK phosphorylation also regulates MCAK localization: the MCAK (S/E) mutant frequently localized to the inner centromere while the (S/A) mutant concentrated at kinetochores. We also detected two different binding sites for MCAK using FRAP analysis of the different MCAK mutants. Moreover, disruption of Aurora B function by expression of a kinase-dead mutant or RNAi prevented centromeric targeting of MCAK. These results link Aurora B activity to MCAK function, with Aurora B regulating MCAK's activity and its localization at the centromere and kinetochore.

Structure of a kinesin microtubule depolymerization machine

With their ability to depolymerize microtubules (MTs), KinI kinesins are the rogue members of the kinesin family. Here we present the 1.6 A crystal structure of a KinI motor core from Plasmodium falciparum, which is sufficient for depolymerization in vitro. Unlike all published kinesin structures to date, nucleotide is not present, and there are noticeable differences in loop regions L6 and L10 (the plus-end tip), L2 and L8 and in switch II (L11 and helix4); otherwise, the pKinI structure is very similar to previous kinesin structures. KinI-conserved amino acids were mutated to alanine, and studied for their effects on depolymerization and ATP hydrolysis. Notably, mutation of three residues in L2 appears to primarily affect depolymerization, rather than general MT binding or ATP hydrolysis. The results of this study confirm the suspected importance of loop 2 for KinI function, and provide evidence that KinI is specialized to hydrolyze ATP after initiating depolymerization.

Modulation of kinesin binding by the C-termini of tubulin

The flexible tubulin C-terminal tails (CTTs) have recently been implicated in the walking mechanism of dynein and kinesin. To address their role in the case of conventional kinesin, we examined the structure of kinesin-microtubule (MT) complexes before and after CTT cleavage by subtilisin. Our results show that the CTTs directly modulate the motor-tubulin interface and the binding properties of motors. CTT cleavage increases motor binding stability, and kinesin appears to adopt a binding conformation close to the nucleotide-free configuration under most nucleotide conditions. Moreover, C-terminal cleavage results in trapping a transient motor-ADP-MT intermediate. Using SH3-tagged dimeric and monomeric constructs, we could also show that the position of the kinesin neck is not affected by the C-terminal segments of tubulin. Overall, our study reveals that the tubulin C-termini define the stability of the MT-kinesin complex in a nucleotide-dependent manner, and highlights the involvement of tubulin in the regulation of weak and strong kinesin binding states.

Regulation of KinI kinesin ATPase activity by binding to the microtubule lattice

KinI kinesins are important in regulating the complex dynamics of the microtubule cytoskeleton. They are unusual in that they depolymerize, rather than move along microtubules. To determine the attributes of KinIs that distinguish them from translocating kinesins, we examined the ATPase activity, microtubule affinity, and three-dimensional microtubule-bound structure of a minimal KinI motor domain. Together, the kinetic, affinity, and structural data lead to the conclusion that on binding to the microtubule lattice, KinIs release ADP and enter a stable, low-affinity, regulated state, from which they do not readily progress through the ATPase cycle. This state may favor detachment, or diffusion of the KinI to its site of action, the microtubule ends. Unlike conventional translocating kinesins, which are microtubule lattice–stimulated ATPases, it seems that with KinIs, nucleotide-mediated modulation of tubulin affinity is only possible when it is coupled to protofilament deformation. This provides an elegant mechanistic basis for their unique depolymerizing activity.

Microtubule Dynamics may Embody a Stationary Bipolarity Forming Mechanism Related to the Prokaryotic Division Site Mechanism (Pole-to-Pole Oscillations)

Cell division mechanisms in eukaryotes and prokaryotes have until recently been seen as being widely different. However, pole-to-pole oscillations of proteins like MinE in prokaryotes are now known to determine the division plane. These protein waves arise through spontaneous pattern forming reaction-diffusion mechanisms, based on cooperative binding of the proteins to a quasistationary matrix (like the cell membrane or DNA). Rather than waves, stationary bipolar pattern formation may arise as well. Some of the involved proteins have eukaryotic homologs (e.g. FtsZ and tubulin), pointing to a possible ancient shared mechanism. Tubulin polymerizes to microtubules in the spindle. Mitotic microtubules are in a highly dynamical state, frequently undergoing rapid shortening (catastrophe), and fragments formed from the microtubule ends are inferred to enhance the destabilization. Here, we show that cooperative binding of such fragments to microtubules may set up a similar pattern forming mechanism as seen in prokaryotes. The result is a spontaneously formed, well controllable, bipolar state of microtubule dynamics in the cell, which may contribute to defining the bipolar spindle.

XMAP215, XKCM1, NuMA, and cytoplasmic dynein are required for the assembly and organization of the transient microtubule array during the maturation of Xenopus oocytes

During the maturation of Xenopus oocytes, a transient microtubule array (TMA) is nucleated from a novel MTOC near the base of the germinal vesicle. The MTOC-TMA transports the meiotic chromosomes to the animal cortex, where it serves as the precursor to the first meiotic spindle. To understand more fully the assembly of the MTOC-TMA, we used confocal immunofluorescence microscopy to examine the localization and function of XMAP215, XKCM1, NuMA, and cytoplasmic dynein during oocyte maturation. XMAP215, XKCM1, and NuMA were all localized to the base of the MTOC-TMA and the meiotic spindle. Microinjection of anti-XMAP215 inhibited microtubule (MT) assembly during oocyte maturation, disrupting assembly of the MTOC-TMA and subsequent assembly of the first meiotic spindle. In contrast, microinjection of anti-XKCM1 promoted MT assembly throughout the cytoplasm, disrupting organization of the MTOC-TMA and meiotic spindle. Finally, microinjection of anti-dynein or anti-NuMA disrupted the organization of the MTOC-TMA and subsequent assembly of the meiotic spindles. These results suggest that XMAP215 and XKCM1 act antagonistically to regulate MT assembly and organization during maturation of Xenopus oocytes, and that dynein and NuMA are required for organization of the MTOC-TMA.

Unconventional motoring: an overview of the Kin C and Kin I kinesins

All kinesins share a conserved core motor domain implying a common mechanism for generating force from ATP hydrolysis. How is it then that kinesins exhibit such divergent activities: motility, microtubule cross-linking and microtubule depolymerization? Although conventional motile kinesins have served as the paradigm for understanding kinesin function, the unconventional kinesins exploit variations on the motile theme to perform unexpected tasks. This review summarizes the biological functions and examines the possible molecular mechanisms of Kin C and Kin I unconventional kinesins. We also discuss the possible differences between the microtubule destabilization models proposed for Kar3 and Kin I kinesins.

Different protofilament-dependence of the microtubule binding between MAP2 and MAP4

To see a molecular basis of the difference in the microtubule binding between MAP2 and MAP4, we compared the binding of them onto microtubule and Zinc-sheet in the presence of various concentrations of NaCl. The Zinc-sheet is the lateral association of protofilaments arranged in an antiparallel fashion with alternatively exposed opposite surfaces, so that binding requiring adjacent protofilaments is restricted. While the salt-dependence of the MAP2 desorption was not altered between these tubulin polymers, MAP4 dissociated from Zinc-sheet at lower concentrations of NaCl than from microtubule. These results suggest that single protofilament is sufficient for microtubule binding of MAP2 as observed by Al-Bassam et al. [J. Cell Biol. 157 (2002) 1187], but MAP4 appeared to interact with adjacent protofilaments during microtubule-binding. Weakened binding on Zinc-sheets was also observed in the projection domain-deletion mutants of MAP4, so that the difference in the protofilament-dependence would lie in the relatively conserved microtubule-binding domain.

Dynamics and mechanics of the microtubule plus end

An important function of microtubules is to move cellular structures such as chromosomes, mitotic spindles and other organelles around inside cells. This is achieved by attaching the ends of microtubules to cellular structures; as the microtubules grow and shrink, the structures are pushed or pulled around the cell. How do the ends of microtubules couple to cellular structures, and how does this coupling regulate the stability and distribution of the microtubules? It is now clear that there are at least three properties of a microtubule end: it has alternate structures; it has a biochemical transition defined by GTP hydrolysis; and it forms a distinct target for the binding of specific proteins. These different properties can be unified by thinking of the microtubule as a molecular machine, which switches between growing and shrinking modes. Each mode is associated with a specific end structure on which end-binding proteins can assemble to modulate dynamics and couple the dynamic properties of microtubules to the movement of cellular structures.

A kinesin mutant with an atypical bipolar spindle undergoes normal mitosis

Motor proteins have been implicated in various aspects of mitosis, including spindle assembly and chromosome segregation. Here, we show that acentrosomal Arabidopsis cells that are mutant for the kinesin, ATK1, lack microtubule accumulation at the predicted spindle poles during prophase and have reduced spindle bipolarity during prometaphase. Nonetheless, all abnormalities are rectified by anaphase and chromosome segregation appears normal. We conclude that ATK1 is required for normal microtubule accumulation at the spindle poles during prophase and possibly functions in spindle assembly during prometaphase. Because aberrant spindle morphology in these mutants is resolved by anaphase, we postulate that mitotic plant cells contain an error-correcting mechanism. Moreover, ATK1 function seems to be dosage-dependent, because cells containing one wild-type allele take significantly longer to proceed to anaphase as compared with cells containing two wild-type alleles.