Water oxidation mechanism in photosystem II, including oxidations, proton release pathways, O-O bond formation and O2 release

Synthetic Mn3Ce2O5-Cluster Mimicking the Oxygen-Evolving Center in Photosynthesis

The photosynthetic oxygen-evolving center (OEC) is a unique Mn4CaO5-cluster that catalyses water splitting into electrons, protons, and dioxygen. Precisely structural and functional mimicking of the OEC is a long-standing challenge and pressingly needed for understanding the structure-function relationship and catalytic mechanism of O-O bond formation. Herein we report two simple and robust artificial Mn3Ce2O5-complexes that display a remarkable structural similarity to the OEC in regarding of the ten-atom core (five metal ions and five oxygen bridges) and the alkyl carboxylate peripheral ligands. This Mn3Ce2O5-cluster can catalyse the water-splitting reaction on the surface of ITO electrode. These results clearly show that cerium can structurally and functionally replace both calcium and manganese in the cluster. Mass spectroscopic measurements demonstrate that the oxide bridges in the cluster are exchangeable and can be rapidly replaced by the isotopic oxygen of H2 18O in acetonitrile solution, which supports that the oxide bridge(s) may serve as the active site for the formation of O-O bond during the water-splitting reaction. These results would contribute to our understanding of the structure-reactivity relationship of both natural and artificial clusters and shed new light on the development of efficient water-splitting catalysts in artificial photosynthesis.

Mechanistic elucidation of O2 production from tBuOOH in water using the Mn(II) catalyst [Mn2(mcbpen)2(H2O)2]2+: a DFT study

This study employs density functional theory at the SMD/B3LYP-D3/6-311+G(2d,p),def2-TZVPP//SMD/B3LYP-D3/6-31G(d),SDD level of theory to explore the mechanistic details of O2 generation from tBuOOH, using H218O as the solvent, in the presence of the Mn(II) catalyst [Mn2(mcbpen)2(H2O)2]2+. Since this chemistry was reported to occur through the reaction of Mn(III)(μ-O)Mn(IV)-O˙ with water, we first revaluated this proposal and found that it occurs with an activation barrier greater than 36 kcal mol-1, ruling out the functioning of such a dimer as the active catalyst. Experimental evidence has shown that the oxidation of [Mn2(mcbpen)2(H2O)2]2+ by tBuOOH in H218O produces the Mn(IV) species [Mn(18O)(mcbpen)]+. Our investigations revealed a plausible mechanism for this observation in which [Mn (18O)(mcbpen)]+ acts as the active catalyst, generating the tert-butyl peroxyl radical (tBuOO˙) through its reaction with tBuOOH. In this proposed mechanism, the O-O bond is formed through the interaction of tBuOO˙ with another [Mn(18O)(mcbpen)]+, finally leading to the formation of the 16O18O product. Our findings underscore the pivotal role of [Mn(18O)(mcbpen)]+ in both generating the active species tBuOO˙ and consuming it to produce 16O18O. With activation barriers as low as about 9 kcal mol-1, these elementary steps highlight the feasibility of our proposed mechanism. Moreover, this mechanism elucidates why, experimentally, one of the oxygen atoms in the released O2 comes from water, while the other originates from tBuOOH. This research broadens our understanding of high oxidation state manganese chemistry, setting the stage for the development of more efficient Mn-based catalysts, aimed at improving processes in both renewable energy and synthetic chemistry.

Hey ho, where'd the proton go? Final deprotonation of O6 within the S3 state of photosystem II

The deprotonation of O6 within the S3 state marks the final deprotonation event before the formation of oxygen‑oxygen bond interactions and eventual production and release of dioxygen. Gaining a thorough understanding of this event, from the proton acceptors involved, to the exfiltration pathways available, is key in determining the nature of the resulting oxygen species, influencing the mechanism through which the first oxygen‑oxygen bond forms. Computational analysis, using BS-DFT methodologies, showed that proton abstraction by the local Glu189 residue provides consistent evidence against this being a viable mechanistic pathway due to the lack of a stable product structure. In contrast, abstraction via W3 shows an increasingly stable oxo-oxo product state between r[O5O6] = 2.1 Å & 1.9 Å. The resulting oxo-oxo state is stabilised through donation of β electron character from O6 to Mn1 and α electron character from O6 to O5. This donation from the O6 lone pair is shown to be a key factor in stabilising the oxo-oxo state, in addition to showing the initiation of first O5-O6 bond.

Closing Kok's cycle of nature's water oxidation catalysis

The Mn4CaO5(6) cluster in photosystem II catalyzes water splitting through the Si state cycle (i = 0-4). Molecular O2 is formed and the natural catalyst is reset during the final S3 → (S4) → S0 transition. Only recently experimental breakthroughs have emerged for this transition but without explicit information on the S0-state reconstitution, thus the progression after O2 release remains elusive. In this report, our molecular dynamics simulations combined with density functional calculations suggest a likely missing link for closing the cycle, i.e., restoring the first catalytic state. Specifically, the formation of closed-cubane intermediates with all hexa-coordinate Mn is observed, which would undergo proton release, water dissociation, and ligand transfer to produce the open-cubane structure of the S0 state. Thereby, we theoretically identify the previously unknown structural isomerism in the S0 state that acts as the origin of the proposed structural flexibility prevailing in the cycle, which may be functionally important for nature's water oxidation catalysis.

Mechanisms of Mn(V)-Oxo to Mn(IV)-Oxyl Conversion: From Closed-Cubane Photosystem II to Mn(V) Catalysts and the Role of the Entering Ligands

The low activation barrier for O-O coupling in the closed-cubane Oxygen-Evolving Centre (OEC) of Photosystem II (PSII) requires water coordination with the Mn4 'dangler' ion in the Mn(V)-oxo fragment. This coordination transforms the Mn(V)-oxo complex into a more reactive Mn4(IV)-oxyl species, enhancing O-O coupling. This study explains the mechanism behind the coordination and indicates that in the most stable form of the OEC, the Mn4 fragment adopts a trigonal bipyramidal geometry but needs to transition to a square pyramidal form to be activated for O-O coupling. This transition stabilizes the Mn4 dxy orbital, enabling electron transfer from the oxo ligand to the dxy orbital, converting the oxo ligand into an oxyl species. The role of the water is to coordinate with the square pyramidal structure, reducing the energy gap between the oxo and oxyl forms, thereby lowering the activation energy for O-O coupling. This mechanism applies not only to the OEC system but also to other Mn(V)-based catalysts. For other catalysts, ligands such as OH- stabilize the Mn(IV)-oxyl species better than water, improving catalyst activation for reactions like C-H bond activation. This study is the first to explain the Mn(V)-oxo to Mn(IV)-oxyl conversion, providing a new foundation for Mn-based catalyst design.

Identification, Characterization, and Electronic Structures of Interconvertible Cobalt-Oxygen TAML Intermediates

The reaction of Li[(TAML)CoIII]·3H2O (TAML = tetraamido macrocyclic tetraanionic ligand) with iodosylbenzene at 253 K in acetone in the presence of redox-innocent metal ions (Sc(OTf)3 and Y(OTf)3) or triflic acid affords a blue species 1, which is converted reversibly to a green species 2 upon cooling to 193 K. The electronic structures of 1 and 2 have been determined by combining advanced spectroscopic techniques (X-band electron paramagnetic resonance (EPR), electron nuclear double resonance (ENDOR), X-ray absorption spectroscopy/extended X-ray absorption fine structure (XAS/EXAFS), and magnetic circular dichroism (MCD)) with ab initio theoretical studies. Complex 1 is best represented as an S = 1/2 [(Sol)(TAML•+)CoIII---OH(LA)]- species (LA = Lewis/Brønsted acid and Sol = solvent), where an S = 1 Co(III) center is antiferromagnetically coupled to S = 1/2 TAML•+, which represents a one-electron oxidized TAML ligand. In contrast, complex 2, also with an S = 1/2 ground state, is found to be multiconfigurational with contributions of both the resonance forms [(H-TAML)CoIV═O(LA)]- and [(H-TAML•+)CoIII═O(LA)]-; H-TAML and H-TAML•+ represent the protonated forms of TAML and TAML•+ ligands, respectively. Thus, the interconversion of 1 and 2 is associated with a LA-associated tautomerization event, whereby H+ shifts from the terminal -OH group to TAML•+ with the concomitant formation of a terminal cobalt-oxo species possessing both singlet (SCo = 0) Co(III) and doublet (SCo = 1/2) Co(IV) characters. The reactivities of 1 and 2 at different temperatures have been investigated in oxygen atom transfer (OAT) and hydrogen atom transfer (HAT) reactions to compare the activation enthalpies and entropies of 1 and 2.

Exploring the Deprotonation Process during Incorporation of a Ligand Water Molecule at the Dangling Mn Site in Photosystem II

The Mn4CaO5 cluster, featuring four ligand water molecules (W1 to W4), serves as the water-splitting site in photosystem II (PSII). X-ray free electron laser (XFEL) structures exhibit an additional oxygen site (O6) adjacent to the O5 site in the fourth lowest oxidation state, S3, forming Mn4CaO6. Here, we investigate the mechanism of the second water ligand molecule at the dangling Mn (W2) as a potential incorporating species, using a quantum mechanical/molecular mechanical (QM/MM) approach. Previous QM/MM calculations demonstrated that W1 releases two protons through a low-barrier H-bond toward D1-Asp61 and subsequently releases an electron during the S2 to S3 transition, resulting in O•- at W1 and protonated D1-Asp61. During the process of Mn4CaO6 formation, O•-, rather than H2O or OH-, best reproduced the O5···O6 distance. Although the catalytic cluster with O•- at O6 is more stable than that with O•- at W1 in S3, it does not occur spontaneously due to the significantly uphill deprotonation process. Assuming O•- at W2 incorporates into the O6 site, an exergonic conversion from Mn1(III)Mn2(IV)Mn3(IV)Mn4(IV) (equivalent to the open-cubane S2 valence state) to Mn1(IV)Mn2(IV)Mn3(IV)Mn4(III) (equivalent to the closed-cubane S2 valence state) occurs. These findings provide energetic insights into the deprotonation and structural conversion events required for the Mn4CaO6 formation.

Excitation landscape of the CP43 photosynthetic antenna complex from multiscale simulations

Photosystem II (PSII), the principal enzyme of oxygenic photosynthesis, contains two integral light harvesting proteins (CP43 and CP47) that bind chlorophylls and carotenoids. The two intrinsic antennae play crucial roles in excitation energy transfer and photoprotection. CP43 interacts most closely with the reaction center of PSII, specifically with the branch of the reaction center (D1) that is responsible for primary charge separation and electron transfer. Deciphering the function of CP43 requires detailed atomic-level insights into the properties of the embedded pigments. To advance this goal, we employ a range of multiscale computational approaches to determine the site energies and excitonic profile of CP43 chlorophylls, using large all-atom models of a membrane-bound PSII monomer. In addition to time-dependent density functional theory (TD-DFT) used in the context of a quantum-mechanics/molecular-mechanics setup (QM/MM), we present a thorough analysis using the perturbed matrix method (PMM), which enables us to utilize information from long-timescale molecular dynamics simulations of native PSII-complexed CP43. The excited state energetics and excitonic couplings have both similarities and differences compared with previous experimental fits and theoretical calculations. Both static TD-DFT and dynamic PMM results indicate a layered distribution of site energies and reveal specific groups of chlorophylls that have shared contributions to low-energy excitations. Importantly, the contribution to the lowest energy exciton does not arise from the same chlorophylls at each system configuration, but rather changes as a function of conformational dynamics. An unexpected finding is the identification of a low-energy charge-transfer excited state within CP43 that involves a lumenal (C2) and the central (C10) chlorophyll of the complex. The results provide a refined basis for structure-based interpretation of spectroscopic observations and for further deciphering excitation energy transfer in oxygenic photosynthesis.

Evolution in the Design of Water Oxidation Catalysts with Transition-Metals: A Perspective on Biological, Molecular, Supramolecular, and Hybrid Approaches

Increased demand for a carbon-neutral sustainable energy scheme augmented by climatic threats motivates the design and exploration of novel approaches that reserve intermittent solar energy in the form of chemical bonds in molecules and materials. In this context, inspired by biological processes, artificial photosynthesis has garnered significant attention as a promising solution to convert solar power into chemical fuels from abundantly found H2O. Among the two redox half-reactions in artificial photosynthesis, the four-electron oxidation of water according to 2H2O → O2 + 4H+ + 4e- comprises the major bottleneck and is a severe impediment toward sustainable energy production. As such, devising new catalytic platforms, with traditional concepts of molecular, materials and biological catalysis and capable of integrating the functional architectures of the natural oxygen-evolving complex in photosystem II would certainly be a value-addition toward this objective. In this review, we discuss the progress in construction of ideal water oxidation catalysts (WOCs), starting with the ingenuity of the biological design with earth-abundant transition metal ions, which then diverges into molecular, supramolecular and hybrid approaches, blurring any existing chemical or conceptual boundaries. We focus on the geometric, electronic, and mechanistic understanding of state-of-the-art homogeneous transition-metal containing molecular WOCs and summarize the limiting factors such as choice of ligands and predominance of environmentally unrewarding and expensive noble-metals, necessity of high-valency on metal, thermodynamic instability of intermediates, and reversibility of reactions that create challenges in construction of robust and efficient water oxidation catalyst. We highlight how judicious heterogenization of atom-efficient molecular WOCs in supramolecular and hybrid approaches put forth promising avenues to alleviate the existing problems in molecular catalysis, albeit retaining their fascinating intrinsic reactivities. Taken together, our overview is expected to provide guiding principles on opportunities, challenges, and crucial factors for designing novel water oxidation catalysts based on a synergy between conventional and contemporary methodologies that will incite the expansion of the domain of artificial photosynthesis.

Soluble Gd6Cu24 clusters: effective molecular electrocatalysts for water oxidation

The water oxidation half reaction in water splitting for hydrogen production is extremely rate-limiting. This study reports the synthesis of two heterometallic clusters (Gd6Cu24-IM and Gd6Cu24-AC) for application as efficient water oxidation catalysts. Interestingly, the maximum turnover frequency of Gd6Cu24-IM in an NaAc solution of a weak acid (pH 6) was 319 s-1. The trimetallic catalytic site, H2O-GdIIICuII2-H2O, underwent two consecutive two-electron two-proton coupled transfer processes to form high-valent GdIII-O-O-CuIII2 intermediates. Furthermore, the O-O bond was formed via intramolecular interactions between the CuIII and GdIII centers. The results of this study revealed that synergistic catalytic water oxidation between polymetallic sites can be an effective strategy for regulating O-O bond formation.

Structural and energetic insights into Mn-to-Fe substitution in the oxygen-evolving complex

Manganese (Mn) serves as the catalytic center for water splitting in photosystem II (PSII), despite the abundance of iron (Fe) on earth. As a first step toward why Mn and not Fe is employed by Nature in the water oxidation catalyst, we investigated the Fe₄CaO₅ cluster in the PSII protein environment using a quantum mechanical/molecular mechanical (QM/MM) approach, assuming an equivalence between Mn(III/IV) and Fe(II/III). Substituting Mn with Fe resulted in the protonation of μ-oxo bridges at sites O2 and O3 by Arg357 and D1-His337, respectively. While the Mn₄CaO₅ cluster exhibits distinct open- and closed-cubane S₂ conformations, the Fe₄CaO₅ cluster lacks this variability due to an equal spin distribution over sites Fe1 and Fe4. The absence of a low-barrier H-bond between a ligand water molecule (W1) and D1-Asp61 in the Fe₄CaO₅ cluster may underlie its incapability for ligand water deprotonation, highlighting the relevance of Mn in natural water splitting.

Is There a Different Mechanism for Water Oxidation in Higher Plants?

The leading mechanism for the formation of O2 in photosystem II (PSII) has, during the past decade, been established as the so-called oxyl-oxo mechanism. In that mechanism, O2 is formed from a binding between an oxygen radical (oxyl) and a bridging oxo group. For the case of higher plants, that mechanism has recently been criticized. Instead, a nucleophilic attack of an oxo group on a five-coordinated Mn(V)═O group forming O2 has been suggested in a so-called water-unbound (WU) mechanism. In the present study, the WU mechanism has been investigated. It is found that the WU mechanism is just a variant of a previously suggested mechanism but with a reactant and a transition state that have much higher energies. The addition of a water molecule on the empty site of the Mn(V)═O center is very exergonic and leads back to the previously suggested oxyl-oxo mechanism.

Does Serial Femtosecond Crystallography Depict State-Specific Catalytic Intermediates of the Oxygen-Evolving Complex?

Recent advances in serial femtosecond crystallography (SFX) of photosystem II (PSII), enabled by X-ray free electron lasers (XFEL), provided the first geometric models of distinct intermediates in the catalytic S-state cycle of the oxygen-evolving complex (OEC). These models are obtained by flash-advancing the OEC from the dark-stable state (S₁) to more oxidized intermediates (S₂ and S₃), eventually cycling back to the most reduced S₀. However, the interpretation of these models is controversial because geometric parameters within the Mn₄CaO₅ cluster of the OEC do not exactly match those expected from coordination chemistry for the spectroscopically verified manganese oxidation states of the distinct S-state intermediates. Here we focus on the first catalytic transition, S₁ → S₂, which represents a one-electron oxidation of the OEC. Combining geometric and electronic structure criteria, including a novel effective oxidation state approach, we analyze existing 1-flash (1F) SFX-XFEL crystallographic models that should depict the S₂ state of the OEC. We show that the 1F/S₂ equivalence is not obvious, because the Mn oxidation states and total unpaired electron counts encoded in these models are not fully consistent with those of a pure S₂ state and with the nature of the S₁ → S₂ transition. Furthermore, the oxidation state definition in two-flashed (2F) structural models is practically impossible to elucidate. Our results advise caution in the extraction of electronic structure information solely from the literal interpretation of crystallographic models and call for re-evaluation of structural and mechanistic interpretations that presume exact correspondence of such models to specific catalytic intermediates of the OEC.

Copper Complex Catalyzed Two-Electron and Proton Shuttle Mechanism of O-O Bond Formation from DFT-Based Metadynamics Simulations

We performed first-principles metadynamics simulations to explore the mechanistic pathway of oxygen-oxygen bond formation catalyzed by cis-bis(hydroxo) and cis-(hydroxo)oxo copper complexes. The ligands of considered complexes involve modified bipyridine ligands with oxo and hydroxo groups on 6, 6' positions. The study focuses on the kinetics and thermodynamics of the oxygen-oxygen bond formation. The individual migration of the proton to the hydroxyl group and hydroxide to the oxo and hydroxo moieties of the complexes was examined. The proton transfer requires more kinetic barrier than the hydroxide migration. The nature of the electronic density was analyzed with the help of spin population analysis. The molecular orbitals and natural orbital analysis were carried out to examine the nature of the orbitals involved in the oxygen-oxygen bond formation. The σ*(d_x²_-y²-p_x) molecular orbital of the Cu-O or Cu-OH bond overlaps with the p_z orbital of the hydroxide ion in forming the oxygen-oxygen bond. The two-electron two-centered (2e^--2C) bond is observed in the oxygen-oxygen bond formation. In the oxidation process, these ligands stabilize the electron density from the water or hydroxide ion. These redox-active ligands also help stabilize the formed hydrogen peroxide or peroxide complexes.

Identification of the protonation and oxidation states of the oxygen-evolving complex in the low-dose X-ray crystal structure of photosystem II

In photosystem II (PSII), the O3 and O4 sites of the Mn₄CaO₅ cluster form hydrogen bonds with D1-His337 and a water molecule (W539), respectively. The low-dose X-ray structure shows that these hydrogen bond distances differ between the two homogeneous monomer units (A and B) [Tanaka et al., J. Am Chem. Soc. 2017, 139, 1718]. We investigated the origin of the differences using a quantum mechanical/molecular mechanical (QM/MM) approach. QM/MM calculations show that the short O4-O_W539 hydrogen bond (~2.5 Å) of the B monomer is reproduced when O4 is protonated in the S₁ state. The short O3-Nε_His337 hydrogen bond of the A monomer is due to the formation of a low-barrier hydrogen bond between O3 and doubly-protonated D1-His337 in the overreduced states (S_-1 or S_-2). It seems plausible that the oxidation state differs between the two monomer units in the crystal.

Substitution of Ca2+ and changes in the H-bond network near the oxygen-evolving complex of photosystem II

Ca²⁺, which provides binding sites for ligand water molecules W3 and W4 in the Mn₄CaO₅ cluster, is a prerequisite for O₂ evolution in photosystem II (PSII). We report structural changes in the H-bond network and the catalytic cluster itself upon the replacement of Ca²⁺ with other alkaline earth metals, using a quantum mechanical/molecular mechanical approach. The small radius of Mg²⁺ makes W3 donate an H-bond to D1-Glu189 in Mg²⁺-PSII. If an additional water molecule binds at the large surface of Ba²⁺, it donates H-bonds to D1-Glu189 and the ligand water molecule at the dangling Mn, altering the H-bond network. The potential energy profiles of the H-bond between D1-Tyr161 (TyrZ) and D1-His190 and the interconversion between the open- and closed-cubane S₂ conformations remain substantially unaltered upon the replacement of Ca²⁺. Remarkably, the O5⋯Ca²⁺ distance is shortest among all O5⋯metal distances irrespective of the radius being larger than that of Mg²⁺. Furthermore, Ca²⁺ is the only alkaline earth metal that equalizes the O5⋯metal and O2⋯metal distances and facilitates the formation of the symmetric cubane structure.

Alternative Mechanism for O2 Formation in Natural Photosynthesis via Nucleophilic Oxo-Oxo Coupling

O2 formation in photosystem II (PSII) is a vital event on Earth, but the exact mechanism remains unclear. The presently prevailing theoretical model is "radical coupling" (RC) involving a Mn(IV)-oxyl unit in an "open-cubane" Mn4CaO6 cluster, which is supported experimentally by the S3 state of cyanobacterial PSII featuring an additional Mn-bound oxygenic ligand. However, it was recently proposed that the major structural form of the S3 state of higher plants lacks this extra ligand, and that the resulting S4 state would feature instead a penta-coordinate dangler Mn(V)=oxo, covalently linked to a "closed-cubane" Mn3CaO4 cluster. For this proposal, we explore here a large number of possible pathways of O-O bond formation and demonstrate that the "nucleophilic oxo-oxo coupling" (NOOC) between Mn(V)=oxo and μ3-oxo is the only eligible mechanism in such a system. The reaction is facilitated by a specific conformation of the cluster and concomitant water binding, which is delayed compared to the RC mechanism. An energetically feasible process is described starting from the valid S4 state through the sequential formation of peroxide and superoxide, followed by O2 release and a second water insertion. The newly found mechanism is consistent with available experimental thermodynamic and kinetic data and thus a viable alternative pathway for O2 formation in natural photosynthesis, in particular for higher plants.

Three-Electron Two-Centered Bond and Single-Electron Transfer Mechanism of Water Splitting via a Copper-Bipyridine Complex

We report the atomistic and electronic details of the mechanistic pathway of the oxygen-oxygen bond formation catalyzed by a copper-2,2'-bipyridine complex. Density functional theory-based molecular dynamics simulations and enhanced sampling methods were employed for this study. The thermodynamics and electronic structure of the oxygen-oxygen bond formation are presented in this study by considering the cis-bishydroxo, [Cu^III(bpy)(OH)₂]⁺, and cis-(hydroxo)oxo, [Cu^IV(bpy)(OH)(═O)]⁺, complexes as active catalysts. In the cis-bishydroxo complex, the hydroxide transfer requires a higher kinetic barrier than the proton transfer process. In the case of [Cu^IV(bpy)(OH)(═O)]⁺, the proton transfer requires a higher free energy than the hydroxide one. The peroxide bond formation is thermodynamically favorable for the [Cu^IV(bpy)(OH)(═O)]⁺ complex compared with the other. The hydroxide ion is transferred to one of the Cu-OH moieties, and the proton is transferred to the solvent. The free energy barrier for this migration is higher than that for the former transfer. From the analysis of molecular orbitals, it is found that the electron density is primarily present on the water molecules near the active sites in the highest occupied molecular orbital (HOMO) state and lowest unoccupied molecular orbital (LUMO) of the ligands. Natural bond orbital (NBO) analysis reveals the electron transfer process during the oxygen-oxygen bond formation. The σ*Cu(d_xz)-O(p) orbitals are involved in the oxygen-oxygen bond formation. During the bond formation, three-electron two-centered (3e^--2C) bonds are observed in [Cu^III(bpy)(OH)₂]⁺ during the transfer of the hydroxide before the formation of the oxygen-oxygen bond.

Electron-Transfer Route in the Early Oxidation States of the Mn4CaO5 Cluster in Photosystem II

The electron transfer from the oxygen-evolving Mn4CaO5 cluster to the electron acceptor D1-Tyr161 (TyrZ) is a prerequisite for water oxidation and O2 evolution. Here, we analyzed the electronic coupling in the rate-limiting electron-transfer transitions using a combined quantum mechanical/molecular mechanical/polarizable continuum model approach. In the S0 to S1 transition, the electronic coupling between the electron-donor Mn3(III) and TyrZ is small (2 meV). In contrast, the electronic coupling between the dangling Mn4(III) and TyrZ is significantly large (172 meV), which suggests that the electron transfer proceeds from Mn3(III) to TyrZ via Mn4(III). In the S1 to S2 transition, the electronic coupling between Mn4(III) and TyrZ is also larger (124 meV) than that between Mn1(III) and TyrZ (1 meV), which favors the formation of the open-cubane S2 conformation with Mn4(IV) over the formation of the closed-cubane S2 conformation with Mn1(IV). In the S0 to S1 and S1 to S2 transitions, the Mn4 d-orbital and the TyrZ π-orbital are hybridized via D1-Asp170, which suggests that D1-Asp170 commonly provides a dominant electron-transfer route.

Biological nitrogen fixation in theory, practice, and reality: a perspective on the molybdenum nitrogenase system

Nitrogenase is the sole enzyme responsible for the ATP-dependent conversion of atmospheric dinitrogen into the bioavailable form of ammonia (NH₃ ), making this protein essential for the maintenance of the nitrogen cycle and thus life itself. Despite the widespread use of the Haber-Bosch process to industrially produce NH₃ , biological nitrogen fixation still accounts for half of the bioavailable nitrogen on Earth. An important feature of nitrogenase is that it operates under physiological conditions, where the equilibrium strongly favours ammonia production. This biological, multielectron reduction is a complex catalytic reaction that has perplexed scientists for decades. In this review, we explore the current understanding of the molybdenum nitrogenase system based on experimental and computational research, as well as the limitations of the crystallographic, spectroscopic, and computational techniques employed. Finally, essential outstanding questions regarding the nitrogenase system will be highlighted alongside suggestions for future experimental and computational work to elucidate this essential yet elusive process.

Water oxidation in oxygenic photosynthesis studied by magnetic resonance techniques

The understanding of light-induced biological water oxidation in oxygenic photosynthesis is of great importance both for biology and (bio)technological applications. The chemically difficult multistep reaction takes place at a unique protein-bound tetra-manganese/calcium cluster in photosystem II whose structure has been elucidated by X-ray crystallography (Umena et al. Nature 2011, 473, 55). The cluster moves through several intermediate states in the catalytic cycle. A detailed understanding of these intermediates requires information about the spatial and electronic structure of the Mn₄ Ca complex; the latter is only available from spectroscopic techniques. Here, the important role of Electron Paramagnetic Resonance (EPR) and related double resonance techniques (ENDOR, EDNMR), complemented by quantum chemical calculations, is described. This has led to the elucidation of the cluster's redox and protonation states, the valence and spin states of the manganese ions and the interactions between them, and contributed substantially to the understanding of the role of the protein surrounding, as well as the binding and processing of the substrate water molecules, the O-O bond formation and dioxygen release. Based on these data, models for the water oxidation cycle are developed.

How Nature Makes O2: an Electronic Level Mechanism for Water Oxidation in Photosynthesis

In this paper, we combine broken symmetry density functional calculations and electron paramagnetic resonance analysis to obtain the electronic structure of the penultimate S₃ state of nature's water-oxidizing complex and determine the electronic pathway of O-O bond formation. Analysis of the electronic structure changes along the reaction path shows that two spin crossovers, facilitated by the geometry and magnetism of the water-oxidizing complex, are used to provide a unique low-energy pathway. The pathway is facilitated via the formation and stabilization of the [O₂]^3- ion. This ion is formed between ligated deprotonated substrate waters, O5 and O6, and is stabilized by antiferromagnetic interaction with the Mn ions of the complex. Combining the computational, crystallographic, and spectroscopic data, we show that an equilibrium exists between the O5 oxo and O6 hydroxo forms with an S = 3 spin state and a deprotonated O6 form containing a two-center one-electron bond in [O5O6]^3- which we identify as the form detected using crystallography. This form corresponds to an S = 6 spin state which we demonstrate gives rise to a low-intensity EPR spectrum compared with the accompanying S = 3 state, making its detection via EPR difficult and overshadowed by the S = 3 form. Simulations using 70% of the S = 6 component give rise to a superior fit to the experimental W-band EPR spectral envelope compared with an S = 3 only form. Analyses of the most recent X-ray emission spectroscopy first moment changes for solution and time-resolved crystal data are also shown to support the model. The computational, crystallographic, and spectroscopic data are shown to coalesce to the same picture of a predominant S = 6 species containing the first one-electron oxidation product of two water molecules, that is, [O5O6]^3-. Progression of this form to the two-electron-oxidized peroxo and three-electron-oxidized superoxo forms, leading eventually to the evolution of triplet O₂, is proposed to be the pathway nature adopts to oxidize water. The study reveals the key electronic, magnetic, and structural design features of nature's catalyst which facilitates water oxidation to O₂ under ambient conditions.

Spin-Gated Selectivity of the Water Oxidation Reaction Mediated by Free Pentameric CaxMn5-xO5+ Clusters

We report on the first preparation of isolated ligand-free CaMn₄O₅⁺ gas-phase clusters, as well as other pentameric Ca_xMn_5-xO₅⁺ (x = 0-4) clusters with varying Ca contents, which serve as molecular models of the natural CaMn₄O₅ inorganic cluster in photosystem II. Ion trap reactivity studies with D₂O and H₂¹⁸O reveal a pronounced cluster composition-dependent ability to mediate the oxidation of water to hydrogen peroxide. First-principles density functional theory simulations elucidate the mechanism of water oxidation, proceeding via formation of a terminal oxyl radical followed by oxyl/hydroxy (O/OH) coupling. The critical coupling reaction step entails a single electron transfer from the oxyl radical to the accommodating cluster core with a concurrent O/OH coupling forming an adsorbed OOH intermediate group. The spin-conserving electron transfer step takes place when the spin of the transferred electron is aligned with the spins of the d-electrons of the Mn atoms in the cuboidal high-spin cluster isomer. The d-electrons provide a ferromagnetically ordered environment that facilitates the spin-gated selective electron transfer process, resulting in parallel-spin-exchange stabilization and a lowered transition state barrier for the coupling reaction involving the frontier orbitals of the oxyl and hydroxy reactant intermediates.

Water Oxidation Catalyzed by a Bioinspired Tetranuclear Manganese Complex: Mechanistic Study and Prediction

Density functional theory calculations were utilized to elucidate the water oxidation mechanism catalyzed by polyanionic tetramanganese complex a [Mn^III ₃ Mn^IV O₃ (CH₃ COO)₃ (A-α-SiW₉ O₃₄ )]^6- . Theoretical results indicated that catalytic active species 1 (Mn₄ ^{III,III,IV,IV} ) was formed after O₂ formation in the first turnover. From 1, three sequential proton-coupled electron transfer (PCET) oxidations led to the Mn^IV -oxyl radical 4 (Mn₄ ^IV,IV,IV,IV -O⋅). Importantly, 4 had an unusual butterfly-shaped Mn₂ O₂ core for the two substrate-coordinated Mn sites, which facilitated O-O bond formation via direct coupling of the oxyl radical and the adjacent Mn^IV -coordinated hydroxide to produce the hydroperoxide intermediate Int1 (Mn₄ ^III,IV,IV,IV -OOH). This step had an overall energy barrier of 24.9 kcal mol^-1 . Subsequent PCET oxidation of Int1 to Int2 (Mn₄ ^III,IV,IV,IV -O₂ ⋅) enabled the O₂ release in a facile process. Furthermore, apart from the Si-centered complex, computational study suggested that tetramanganese polyoxometalates with Ge, P, and S could also catalyze the water oxidation process, where those bearing P and S likely present higher activities.

The Role of Redox-Inactive Metals in Modulating the Redox Potential of the Mn4CaO4 Model Complex

Photosynthetic oxygen-evolving center (OEC), the "engine of life", is a unique Mn₄CaO₅ cluster catalyzing the water oxidation. The role of redox-inactive component Ca²⁺, which can only be functionally replaced by Sr²⁺ in a biological environment, has been under debate for a long time. Recently, its modulating effect on the redox potential of native OEC and artificial structural OEC model complex has received great attention, and linear relationship between the potential and the Lewis acidity of the redox-inactive metal has been proposed for the MMn₃O₄ model complex. In this work, the modulating effect has been studied in detail using the Mn₄CaO₄ model complex, which is the closest structural model to OEC to date and has a similar redox potential at the S₁-S₂ transition. We found the redox-inactive metal only has a weak modulating effect on the potential, which is comparable in strength to that of the ligand environments. Meanwhile, the net charge of the complex, which could be changed along with the redox-inactive metal, has a high impact on the potential and can be unified by protonation, deprotonation, or ligand modification. Although the modulating effect of the redox-inactive metal is not very strong, the linear relationship between the potential and the Lewis acidity is still valid for Mn₄MO₄ complexes. Our results of strong modulating effects for net charge and weak modulating effects for redox-inactive metal fit with the previous experimental observations on Mn₄MO₄ (M = Ca²⁺, Y³⁺, and Gd³⁺) model complexes, and suggest that Ca²⁺ can be structurally and electrochemically replaced with other metal cations, together with proper ligand modifications.

Mimicking the Oxygen-Evolving Center in Photosynthesis

The oxygen-evolving center (OEC) in photosystem II (PSII) of oxygenic photosynthetic organisms is a unique heterometallic-oxide Mn4CaO5-cluster that catalyzes water splitting into electrons, protons, and molecular oxygen through a five-state cycle (Sn, n = 0 ~ 4). It serves as the blueprint for the developing of the man-made water-splitting catalysts to generate solar fuel in artificial photosynthesis. Understanding the structure-function relationship of this natural catalyst is a great challenge and a long-standing issue, which is severely restricted by the lack of a precise chemical model for this heterometallic-oxide cluster. However, it is a great challenge for chemists to precisely mimic the OEC in a laboratory. Recently, significant advances have been achieved and a series of artificial Mn4XO4-clusters (X = Ca/Y/Gd) have been reported, which closely mimic both the geometric structure and the electronic structure, as well as the redox property of the OEC. These new advances provide a structurally well-defined molecular platform to study the structure-function relationship of the OEC and shed new light on the design of efficient catalysts for the water-splitting reaction in artificial photosynthesis.

Reversible Structural Isomerization of Nature's Water Oxidation Catalyst Prior to O-O Bond Formation

Photosynthetic water oxidation is catalyzed by a manganese–calcium oxide cluster, which experiences five “S-states” during a light-driven reaction cycle. The unique “distorted chair”-like geometry of the Mn₄CaO₅₍₆₎ cluster shows structural flexibility that has been frequently proposed to involve “open” and “closed”-cubane forms from the S₁ to S₃ states. The isomers are interconvertible in the S₁ and S₂ states, while in the S₃ state, the open-cubane structure is observed to dominate inThermosynechococcus elongatus (cyanobacteria) samples. In this work, using density functional theory calculations, we go beyond the S₃⁺Y_z state to the S₃ⁿY_z^• → S₄⁺Y_z step, and report for the first time that the reversible isomerism, which is suppressed in the S₃⁺Y_z state, is fully recovered in the ensuing S₃ⁿY_z^• state due to the proton release from a manganese-bound water ligand. The altered coordination strength of the manganese–ligand facilitates formation of the closed-cubane form, in a dynamic equilibrium with the open-cubane form. This tautomerism immediately preceding dioxygen formation may constitute the rate limiting step for O₂ formation, and exert a significant influence on the water oxidation mechanism in photosystem II.

Molecular Principles of Redox-Coupled Protonation Dynamics in Photosystem II

Photosystem II (PSII) catalyzes light-driven water oxidization, releasing O₂ into the atmosphere and transferring the electrons for the synthesis of biomass. However, despite decades of structural and functional studies, the water oxidation mechanism of PSII has remained puzzling and a major challenge for modern chemical research. Here, we show that PSII catalyzes redox-triggered proton transfer between its oxygen-evolving Mn₄O₅Ca cluster and a nearby cluster of conserved buried ion-pairs, which are connected to the bulk solvent via a proton pathway. By using multi-scale quantum and classical simulations, we find that oxidation of a redox-active Tyr_z (Tyr161) lowers the reaction barrier for the water-mediated proton transfer from a Ca²⁺-bound water molecule (W3) to Asp61 via conformational changes in a nearby ion-pair (Asp61/Lys317). Deprotonation of this W3 substrate water triggers its migration toward Mn1 to a position identified in recent X-ray free-electron laser (XFEL) experiments [Ibrahim et al. Proc. Natl. Acad. Sci. USA 2020, 117, 12,624-12,635]. Further oxidation of the Mn₄O₅Ca cluster lowers the proton transfer barrier through the water ligand sphere of the Mn₄O₅Ca cluster to Asp61 via a similar ion-pair dissociation process, while the resulting Mn-bound oxo/oxyl species leads to O₂ formation by a radical coupling mechanism. The proposed redox-coupled protonation mechanism shows a striking resemblance to functional motifs in other enzymes involved in biological energy conversion, with an interplay between hydration changes, ion-pair dynamics, and electric fields that modulate the catalytic barriers.

Critical Roles of Exchange and Superexchange Interactions in Dictating Electron Transfer and Reactivity in Metalloenzymes

Electron transfer (ET) is a fundamental process in transition-metal-dependent metalloenzymes. In these enzymes, the spin-spin interactions within the same metal center and/or between different metal sites can play a pivotal role in the catalytic cycle and reactivity. This Perspective highlights that the exchange and/or superexchange interactions can intrinsically modulate the inner-sphere and long-range electron transfer, thus controlling the mechanism and activity of metalloenzymes. For mixed-valence diiron oxygenases, the spin-regulated inner-sphere ET can be dictated by exchange interactions, leading to efficient O-O bond activations. Likewise, the spin-regulated inner-sphere ET can be enhanced by both exchange and superexchange interactions in [Fe4S4]-dependent SAM enzymes, which enable the efficient cleavage of the S─C(γ) or S─C5' bond of SAM. In addition to inner-sphere ET, superexchange interactions may modulate the long-range ET between metalloenzymes. We anticipate that the exchange and superexchange enhanced reactivity could be applicable in other important metalloenzymes, such as Photosystem II and nitrogenases.

Energetics for CO2 Reduction by Molybdenum-Containing Formate Dehydrogenase

The level of carbon dioxide in the atmosphere has increased in a dangerous way during the past century. Methods to decrease this level are therefore of high interest at present. Inspiration to do so in an efficient way could come from biological systems. Molybdenum-containing formate dehydrogenase (Mo-FDH) is one of the most interesting enzymes in this respect. For example, the reduction potential required is not very low. The normal reaction catalyzed by Mo-FDH is actually the opposite one of oxidizing formate to CO2. However, recent electrochemical studies have shown that the reaction can be reversed by a moderate lowering of the reduction potential. The goal of the present study has been to study the full mechanism of Mo-FDH, particularly in the most interesting direction of reducing CO2, which has not been done before. The methods used are the same as those that have been shown to give excellent results for redox enzymes in all cases they have been tested. The results obtained for Mo-FDH are also in excellent agreement with the experimental results.

Theoretical Modeling of Redox Potentials of Biomolecules

The estimation of the redox potentials of biologically relevant systems by means of theoretical-computational approaches still represents a challenge. In fact, the size of these systems typically does not allow a full quantum-mechanical treatment needed to describe electron loss/gain in such a complex environment, where the redox process takes place. Therefore, a number of different theoretical strategies have been developed so far to make the calculation of the redox free energy feasible with current computational resources. In this review, we provide a survey of such theoretical-computational approaches used in this context, highlighting their physical principles and discussing their advantages and limitations. Several examples of these approaches applied to the estimation of the redox potentials of both proteins and nucleic acids are described and critically discussed. Finally, general considerations on the most promising strategies are reported.

Soft x-ray signatures of ionic manganese-oxo systems, including a high-spin manganese(V) complex

Manganese-oxo species catalyze key reactions, including C–H bond activation or dioxygen formation in natural photosynthesis. To better understand relevant reaction intermediates, we characterize electronic states and geometric structures of [MnOn]+...

Alteration of the O2-Producing Mn4Ca Cluster in Photosystem II by the Mutation of a Metal Ligand

The O₂-evolving Mn₄Ca cluster in photosystem II (PSII) is arranged as a distorted Mn₃Ca cube that is linked to a fourth Mn ion (denoted as Mn4) by two oxo bridges. The Mn4 and Ca ions are bridged by residue D1-D170. This is also the only residue known to participate in the high-affinity Mn(II) site that participates in the light-driven assembly of the Mn₄Ca cluster. In this study, we use Fourier transform infrared difference spectroscopy to characterize the impact of the D1-D170E mutation. On the basis of analyses of carboxylate and carbonyl stretching modes and the O-H stretching modes of hydrogen-bonded water molecules, we show that this mutation alters the extensive network of hydrogen bonds that surrounds the Mn₄Ca cluster in the same manner as that of many other mutations. It also alters the equilibrium between conformers of the Mn₄Ca cluster in the dark-stable S₁ state so that a high-spin form of the S₂ state is produced during the S₁-to-S₂ transition instead of the low-spin form that gives rise to the S₂ state multiline electron paramagnetic resonance signal. The mutation may also change the coordination mode of the carboxylate group at position 170 to unidentate ligation of Mn4. This is the first mutation of a metal ligand in PSII that substantially impacts the spectroscopic signatures of the Mn₄Ca cluster without substantially eliminating O₂ evolution. The results have significant implications for our understanding of the roles of alternate active/inactive conformers of the Mn₄Ca cluster in the mechanism of O₂ formation.

Requirement of Chloride for the Downhill Electron Transfer Pathway from the Water-Splitting Center in Natural Photosynthesis

In photosystem II (PSII), Cl^- is a prerequisite for the second flash-induced oxidation of the Mn₄CaO₅ cluster (the S₂ to S₃ transition). We report proton transfer from the substrate water molecule via D1-Asp61 and electron transfer via redox-active D1-Tyr161 (TyrZ) to the chlorophyll pair in Cl^--depleted PSII using a quantum mechanical/molecular mechanical approach. The low-barrier H-bond formation between the substrate water molecule and D1-Asp61 remained unaffected upon the depletion of Cl^-. However, the binding site, D2-Lys317, formed a salt bridge with D1-Asp61, leading to the inhibition of the subsequent proton transfer. Remarkably, the redox potential (E_m) of S₂/S₃ increased significantly, making electron transfer from S₂ to TyrZ energetically uphill, as observed in Ca²⁺-depleted PSII. The uphill electron transfer pathway was induced by the significant increase in E_m(S₂/S₃) caused by the loss of charge compensation for D2-Lys317 upon the depletion of Cl^-, whereas it was induced by the significant decrease in E_m(TyrZ) caused by the rearrangement of the water molecules at the Ca²⁺ binding moiety upon the depletion of Ca²⁺.

Structural and dynamic insights into Mn4Ca cluster-depleted Photosystem II

In the first steps of natural oxygenic photosynthesis, sunlight is used to oxidize water molecules to protons, electrons and molecular oxygen. This reaction takes place on the Mn₄Ca cluster located in the reaction centre of Photosystem II (PSII), where the cluster is assembled and continuously repaired through a process known as photoactivation. Understanding the molecular details of such a process has important implications in different fields, in particular inspiring synthesis and repair strategies for artificial photosynthesis devices. In this regard, a detailed structural and dynamic characterization of Photosystem II lacking a Mn₄Ca cluster, namely apo PSII, is a prerequisite for the full comprehension of the photoactivation. Recently, the structure of the apo PSII was resolved at 2.55 Å resolution [Zhang et al., eLife, 2017, 6, e26933], suggesting a pre-organized structure of the protein cavity hosting the cluster. Anyway, the question of whether these findings are a feature of the method used remains open. Here, by means of classical Molecular Dynamics simulations, we characterized the structural and dynamic features of the apo PSII for different protonation states of the cluster cavity. Albeit an overall conformational stability common to all investigated systems, we found significant deviations in the conformation of the side chains of the active site with respect to the X-ray positions. Our findings suggest that not all residues acting as Mn ligands are pre-organized prior to the Mn₄Ca formation and previous local conformational changes are required in order to bind the first Mn ion in the high-affinity binding site.

Jahn-Teller Effects in a Vanadate-Stabilized Manganese-Oxo Cubane Water Oxidation Catalyst

Heuristic rules that allow identifying the preferred mixed-valence isomers and Jahn-Teller axis arrangements in the water oxidation catalyst [(Mn4 O4 )(V4 O13 )(OAc)3 ]n- and its activated form [(Mn4 O4 )(V4 O13 )(OAc)2 (H2 O)(OH)]n- are derived. These rules are based on computing all combinatorially possible mixed-valence isomers and Jahn-Teller axis arrangements of the MnIII atoms, and associate energetic costs with some structural features, like crossings of multiple Jahn-Teller axes, the location of these axes, or the involved ligands. It is found that the different oxidation states localize on different Mn centers, giving rise to clear Jahn-Teller distortions, unlike in previous crystallographic findings where an apparent valence delocalization was found. The low barriers that connect different Jahn-Teller axis arrangements suggest that the system quickly interconverts between them, leading to the observation of averaged bond lengths in the crystal structure. We conclude that the combination of cubane-vanadate bonds that are chemically inert, cubane-acetate/water bonds that can be activated through a Jahn-Teller axis, and low activation barriers for intramolecular rearrangement of the Jahn-Teller axes plays an essential role in the reactivity of this and probably related compounds.

Spectral Signatures of Oxidation States in a Manganese-Oxo Cubane Water Oxidation Catalyst

We report IR and UV/Vis spectroscopic signatures that allow discriminating between the oxidation states of the manganese-based water oxidation catalyst [(Mn4 O4 )(V4 O13 )(OAc)3 ]3- . Simulated IR spectra show that V=O stretching vibrations in the 900-1000 cm-1 region shift consistently by about 20 cm-1 per oxidation equivalent. Multiple bands in the 1450-1550 cm-1 region also change systematically upon oxidation/reduction. The computed UV/Vis spectra predict that the spectral range above 350 nm is characteristic of the managanese-oxo cubane oxidation state, whereas transitions at higher energy are due to the vanadate ligand. The presence of absorption signals above 680 nm is indicative of the presence of MnIII atoms. Spectroelectrochemical measurements of the oxidation from [Mn2 III Mn2 IV ] to [Mn4 IV ] showed that the change in oxidation state can indeed be tracked by both IR and UV/Vis spectroscopy.

Flexibility Enhances Reactivity: Redox Isomerism and Jahn-Teller Effects in a Bioinspired Mn4O4 Cubane Water Oxidation Catalyst

Understanding how water oxidation to molecular oxygen proceeds in molecular metal-oxo catalysts is a challenging endeavor due to their structural complexity. In this report, we unravel the water oxidation mechanism of the highly active water oxidation catalyst [Mn4V4O17(OAc)3]3-, a polyoxometalate catalyst with a [Mn4O4]6+ cubane core reminiscent of the natural oxygen-evolving complex. Starting from the activated species [Mn4 4+V4O17(OAc)2(H2O)(OH)]1-, we scrutinized multiple pathways to find that water oxidation proceeds via a sequential proton-coupled electron transfer (PCET), O-O bond formation, another PCET, an intramolecular electron transfer, and another PCET resulting in O2 evolution, with a predicted thermodynamic overpotential of 0.71 V. An in-depth investigation of the O-O bond formation process revealed an essential interplay between redox isomerism and Jahn-Teller effects, responsible for enhancing reactivity in the catalytic cycle. This is achieved by redistributing electrons between metal centers and weakening relevant bonds through Jahn-Teller distortions, introducing flexibility to the otherwise rigid cubane core of the catalyst. These mechanistic insights are expected to advance the design of efficient bioinspired Mn cubane water-splitting catalysts.

Structural Reorganization of a Synthetic Mimic of the Oxygen-Evolving Center in Multiple Redox Transitions Revealed by Electrochemical FTIR Spectra

In photosynthesis, the protein-bound natural oxygen-evolving center (OEC) undergoes multiple oxidation-state transitions in the light-driven water splitting reactions with a stepwise change in the oxidation potential. Because the protein is vulnerable to electrochemical oxidation, the multiple oxidation/reduction-state transitions can hardly be achieved by electrochemical oxidation with a continuous change in the oxidation potential. An OEC mimic that can undergo four redox transitions has been synthesized (Zhang, C., Science, 2015, 348, 690-693). Here we report an electrochemical FTIR spectroscopic study of this synthetic complex at its multiple oxidation states in the low-frequency region for Mn-O bonds. Compared with those of the native OEC induced by pulsed laser flashes, our results also show the existence of two structural isomers in the S₂ state, with the closed cubane conformer being more stable than the open cubane conformer, in contrast to that of the native OEC in which the open form is more stable.

Redox Isomerism in the S3 State of the Oxygen-Evolving Complex Resolved by Coupled Cluster Theory

The electronic and geometric structures of the water-oxidizing complex of photosystem II in the steps of the catalytic cycle that precede dioxygen evolution remain hotly debated. Recent structural and spectroscopic investigations support contradictory redox formulations for the active-site Mn4 CaOx cofactor in the final metastable S3 state. These range from the widely accepted MnIV 4 oxo-hydroxo model, which presumes that O-O bond formation occurs in the ultimate transient intermediate (S4 ) of the catalytic cycle, to a MnIII 2 MnIV 2 peroxo model representative of the contrasting "early-onset" O-O bond formation hypothesis. Density functional theory energetics of suggested S3 redox isomers are inconclusive because of extreme functional dependence. Here, we use the power of the domain-based local pair natural orbital approach to coupled cluster theory, DLPNO-CCSD(T), to present the first correlated wave function theory calculations of relative stabilities for distinct redox-isomeric forms of the S3 state. Our results enabled us to evaluate conflicting models for the S3 state of the oxygen-evolving complex (OEC) and to quantify the accuracy of lower-level theoretical approaches. Our assessment of the relevance of distinct redox-isomeric forms for the mechanism of biological water oxidation strongly disfavors the scenario of early-onset O-O formation advanced by literal interpretations of certain crystallographic models. This work serves as a case study in the application of modern coupled cluster implementations to redox isomerism problems in oligonuclear transition metal systems.

Advances and challenges in time-resolved macromolecular crystallography

Conformational changes within biological macromolecules control a vast array of chemical reactions in living cells. Time-resolved crystallography can reveal time-dependent structural changes that occur within protein crystals, yielding chemical insights in unparalleled detail. Serial crystallography approaches developed at x-ray free-electron lasers are now routinely used for time-resolved diffraction studies of macromolecules. These techniques are increasingly being applied at synchrotron radiation sources and to a growing diversity of macromolecules. Here, we review recent progress in the field, including visualizing ultrafast structural changes that guide the initial trajectories of light-driven reactions as well as capturing biologically important conformational changes on slower time scales, for which bacteriorhodopsin and photosystem II are presented as illustrative case studies.

Mechanism of Oxygen Evolution and Mn4CaO5 Cluster Restoration in the Natural Water-Oxidizing Catalyst

Water oxidation occurring in the first steps of natural oxygenic photosynthesis is catalyzed by the pigment/protein complex Photosystem II. This process takes place on the Mn₄Ca cluster located in the core of Photosystem II and proceeds along the five steps (S₀-S₄) of the so-called Kok-Joliot cycle until the release of molecular oxygen. The catalytic cycle can therefore be started afresh through insertion of a new water molecule. Here, combining quantum mechanics/molecular mechanics simulations and minimum energy path calculations, we characterized on different spin surfaces the events occurring in the last sector of the catalytic cycle from structural, electronic, and thermodynamic points of view. We found that the process of oxygen evolution and water insertion can be described well by a two-step mechanism, with oxygen release being the rate-limiting step of the process. Moreover, our results allow us to identify the upcoming water molecule required to regenerate the initial structure of the Mn₄Ca cluster in the S₀ state. The insertion of the water molecule was found to be coupled with the transfer of a proton to a neighboring hydroxide ion, thus resulting in the reconstitution of the most widely accepted model of the S₀ state.

Do multinuclear 3d metal catalysts achieve O-O bond formation via radical coupling or via water nucleophilic attack? WNA leads the way in [Co4O4]n

Catalytic water oxidation is a required process for clean energy production based on the concept of artificial photosynthesis. Here, we provide in situ spectroscopic and computational analysis for the closest known photosystem II analog, [Co₄O₄]ⁿ⁺ ([Co₄O₄Py₄Ac₄]⁰, Py = pyridine and Ac = CH₃COO^-), which catalyzes electrochemical water oxidation. In situ extended X-ray absorption fine structure detects an ultrashort, Co^IV=O (~1.67 Å) moiety, a crucial intermediate for O-O bond formation. Density function theory analyses show that the intermediate has two Co^IV centers and a Co^IV=O unit of strong radicaloid character sufficient to support a Co^IV=O + H₂O = Co-OOH + H⁺ transition, where the carboxyl ligand accepts the proton and the bridging oxygen stabilizes the peroxide via hydrogen bonding. The proposed water nucleophilic attack mechanism accounts for all prior spectroscopic evidence on the Co₄O₄⁴⁺ core. Our results are important for the design and development of efficient water oxidation catalysts, which contribute to the ultimate goal of clean energy from artificial photosynthesis.

Size, Stoichiometry, Dimensionality, and Ca Doping of Manganese Oxide-Based Water Oxidation Clusters: An Oxyl/Hydroxy Mechanism for Oxygen-Oxygen Coupling

Gas-phase ion-trap reactivity experiments and density functional simulations reveal that water oxidation to H₂O₂ mediated by (calcium) manganese oxide clusters proceeds via formation of a terminal oxyl radical followed by oxyl/hydroxy O-O coupling. This mechanism is predicted to be energetically feasible for Mn₂O_y⁺ (y = 2-4) and the binary CaMn₃O₄⁺, in agreement with the experimental observations. In contrast, the reaction does not proceed for the tetramanganese oxides Mn₄O_y⁺ (y = 4-6) under these experimental conditions. This is attributed to the high fluxionality of the tetramanganese clusters, resulting in the instability of the terminal oxyl radical as well as an energetically unfavorable change of the spin state required for H₂O₂ formation. Ca doping, yielding a symmetry-broken lower-symmetry three-dimensional (3D) CaMn₃O₄⁺ cluster, results in structural stabilization of the oxyl radical configuration, accompanied by a favorable coupling between potential energy surfaces with different spin states, thus enabling the cluster-mediated water oxidation reaction and H₂O₂ formation.