Design of high-density antibody microarrays for disease proteomics: key technological issues

Variant biomarker discovery using mass spectrometry-based proteogenomics

Genomic diversity plays critical roles in risk of disease pathogenesis and diagnosis. While genomic variants-including single nucleotide variants, frameshift variants, and mis-splicing isoforms-are commonly detected at the DNA or RNA level, their translated variant protein or polypeptide products are ultimately the functional units of the associated disease. These products are often released in biofluids and could be leveraged for clinical diagnosis and patient stratification. Recent emergence of integrated analysis of genomics with mass spectrometry-based proteomics for biomarker discovery, also known as proteogenomics, have significantly advanced the understanding disease risk variants, precise medicine, and biomarker discovery. In this review, we discuss variant proteins in the context of cancers and neurodegenerative diseases, outline current and emerging proteogenomic approaches for biomarker discovery, and provide a comprehensive proteogenomic strategy for detection of putative biomarker candidates in human biospecimens. This strategy can be implemented for proteogenomic studies in any field of enquiry. Our review timely addresses the need of biomarkers for aging related diseases.

Ultrasensitive detection of multiple cancer biomarkers by a triple cascade amplification strategy in combination with single particle inductively coupled plasma mass spectrometry

A versatile triple cascade amplification strategy was developed for ultrasensitive simultaneous detection of multiple cancer biomarkers using single particle inductively coupled plasma mass spectrometry (spICP-MS). The triple cascade amplification strategy consisted of an enhanced RecJ_f exonuclease-assisted target recycling amplification module, a hybridization chain reaction amplification module, and a signal amplification module based on DNA-templated multiple metal nanoclusters. In the enhanced RecJ_f exonuclease-assisted target recycling amplification module, the DNA bases at the 5' ends of aptamers for specific recognition of biomarkers were deliberately replaced by the corresponding RNA bases to enhance amplification efficiency. The signal amplification module based on DNA-templated multiple metal nanoclusters was innovatively used to amplify the signals measured by spICP-MS and at the same time effectively suppress possible background interferences. The proposed spICP-MS platform achieved satisfactory quantitative results for both carcinoembryonic antigen (CEA) and a-fetoprotein (AFP) in human serum samples with accuracy comparable to that of the commercial ELISA kits. Moreover, it has wide dynamic ranges for both CEA (0.01-100 ng/mL) and AFP (0.01-200 ng/mL). The limit of detection for CEA and AFP was 0.6 and 0.5 pg/mL, respectively. Compared with conventional biomarkers detection methods, the proposed spICP-MS platform has the advantages of operational simplicity, ultra-high sensitivity, wide dynamic range, and low background. Therefore, it is reasonable to expect that the proposed spICP-MS platform can be further developed to be a promising alternative tool for biomarker detection in fields of clinical diagnosis and biomedical research.

Enhanced Optical Biosensing by Aerotaxy Ga(As)P Nanowire Platforms Suitable for Scalable Production

Sensitive detection of low-abundance biomolecules is central for diagnostic applications. Semiconductor nanowires can be designed to enhance the fluorescence signal from surface-bound molecules, prospectively improving the limit of optical detection. However, to achieve the desired control of physical dimensions and material properties, one currently uses relatively expensive substrates and slow epitaxy techniques. An alternative approach is aerotaxy, a high-throughput and substrate-free production technique for high-quality semiconductor nanowires. Here, we compare the optical sensing performance of custom-grown aerotaxy-produced Ga(As)P nanowires vertically aligned on a polymer substrate to GaP nanowires batch-produced by epitaxy on GaP substrates. We find that signal enhancement by individual aerotaxy nanowires is comparable to that from epitaxy nanowires and present evidence of single-molecule detection. Platforms based on both types of nanowires show substantially higher normalized-to-blank signal intensity than planar glass surfaces, with the epitaxy platforms performing somewhat better, owing to a higher density of nanowires. With further optimization, aerotaxy nanowires thus offer a pathway to scalable, low-cost production of highly sensitive nanowire-based platforms for optical biosensing applications.

Construction of transgenic detection system of Brassica napus L. based on single nucleotide polymorphism chip

Brassica napus L. is a vital oil crop in China. As auxiliary tools for rapeseed breeding, transgenic technologies play a considerable role in heterosis, variety improvement, and pest resistance. Research on transgenic detection technologies is of great significance for the introduction, supervision, and development of transgenic rapeseed in China. However, the transgenic detection methods currently in use are complex and time-consuming, with low output. A single nucleotide polymorphism (SNP) chip can effectively overcome such limitations. In the present study, we collected 40 transgenic elements and designed 291 probes. The probe sequences were submitted to Illumina Company, and the Infinium chip technology was used to prepare SNP chips. In the present Brassica napus transgenic detection experiment, 84 high-quality probes of 17 transgenic elements were preliminarily screened, and genotyping effect was optimised for the probe signal value. Ultimately, a transgenic detection system for B. napus was developed. The developed system has the advantages of simple operation, minimal technical errors, and stable detection outcomes. A transgenic detection sensitivity test revealed that the probe designed could accurately detect 1% of transgenic samples and had high detection sensitivity. In addition, in repeatability tests, the CaMV35S promoter coefficient of variation was approximately 3.58%. Therefore, the SNP chip had suitable repeatability in transgene detection. The SNP chip developed could be used to construct transgenic detection systems for B. napus.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-03062-6.

Comprehending the Proteomic Landscape of Ovarian Cancer: A Road to the Discovery of Disease Biomarkers

Despite recent technological advancements allowing the characterization of cancers at a molecular level along with biomarkers for cancer diagnosis, the management of ovarian cancers (OC) remains challenging. Proteins assume functions encoded by the genome and the complete set of proteins, termed the proteome, reflects the health state. Comprehending the circulatory proteomic profiles for OC subtypes, therefore, has the potential to reveal biomarkers with clinical utility concerning early diagnosis or to predict response to specific therapies. Furthermore, characterization of the proteomic landscape of tumor-derived tissue, cell lines, and PDX models has led to the molecular stratification of patient groups, with implications for personalized therapy and management of drug resistance. Here, we review single and multiple marker panels that have been identified through proteomic investigations of patient sera, effusions, and other biospecimens. We discuss their clinical utility and implementation into clinical practice.

Fluorescence Signal Enhancement in Antibody Microarrays Using Lightguiding Nanowires

Fluorescence-based detection assays play an essential role in the life sciences and medicine. To offer better detection sensitivity and lower limits of detection (LOD), there is a growing need for novel platforms with an improved readout capacity. In this context, substrates containing semiconductor nanowires may offer significant advantages, due to their proven light-emission enhancing, waveguiding properties, and increased surface area. To demonstrate and evaluate the potential of such nanowires in the context of diagnostic assays, we have in this work adopted a well-established single-chain fragment antibody-based assay, based on a protocol previously designed for biomarker detection using planar microarrays, to freestanding, SiO₂-coated gallium phosphide nanowires. The assay was used for the detection of protein biomarkers in highly complex human serum at high dilution. The signal quality was quantified and compared with results obtained on conventional flat silicon and plastic substrates used in the established microarray applications. Our results show that using the nanowire-sensor platform in combination with conventional readout methods, improves the signal intensity, contrast, and signal-to-noise by more than one order of magnitude compared to flat surfaces. The results confirm the potential of lightguiding nanowires for signal enhancement and their capacity to improve the LOD of standard diagnostic assays.

A Multiplex Immunosensor for Detecting Perchlorate-Reducing Bacteria for Environmental Monitoring and Planetary Exploration

Perchlorate anions are produced by chemical industries and are important contaminants in certain natural ecosystems. Perchlorate also occurs in some natural and uncontaminated environments such as the Atacama Desert, the high Arctic or the Antarctic Dry Valleys, and is especially abundant on the surface of Mars. As some bacterial strains are capable of using perchlorate as an electron acceptor under anaerobic conditions, their detection is relevant for environmental monitoring on Earth as well as for the search for life on Mars. We have developed an antibody microarray with 20 polyclonal antibodies to detect perchlorate-reducing bacteria (PRB) strains and two crucial and highly conserved enzymes involved in perchlorate respiration: perchlorate reductase and chlorite dismutase. We determined the cross-reactivity, the working concentration, and the limit of detection of each antibody individually and in a multiplex format by Fluorescent Sandwich Microarray Immunoassay. Although most of them exhibited relatively high sensitivity and specificity, we applied a deconvolution method based on graph theory to discriminate between specific signals and cross-reactions from related microorganisms. We validated the system by analyzing multiple bacterial isolates, crude extracts from contaminated reactors and salt-rich natural samples from the high Arctic. The PRB detecting chip (PRBCHIP) allowed us to detect and classify environmental isolates as well as to detect similar strains by using crude extracts obtained from 0.5 g even from soils with low organic-matter levels (<10³ cells/g of soil). Our results demonstrated that PRBCHIP is a valuable tool for sensitive and reliable detection of perchlorate-reducing bacteria for research purposes, environmental monitoring and planetary exploration.

Protein Microarrays for Ocular Diseases

The eye is a multifaceted organ organized in several compartments with particular properties that reflect their diverse functions. The prevalence of ocular diseases is increasing, mainly because of its relationship with aging and of generalized lifestyle changes. However, the pathogenic molecular mechanisms of many common eye pathologies remain poorly understood. Considering the unquestionable importance of proteins in cellular processes and disease progression, proteomic techniques, such as protein microarrays, represent a valuable approach to analyze pathophysiological protein changes in the ocular environment. This technology enables to perform multiplex high-throughput protein expression profiling with minimal sample volume requirements broadening our knowledge of ocular proteome network in eye diseases.In this review, we present a brief summary of the main types of protein microarrays (antibody microarrays, reverse-phase protein microarrays, and protein microarrays) and their application for protein change detection in chronic ocular diseases such as dry eye, age-related macular degeneration, diabetic retinopathy, and glaucoma. The validation of these specific protein changes in eye pathologies may lead to the identification of new biomarkers, depiction of ocular disease pathways, and assistance in the diagnosis, prognosis, and development of new therapeutic options for eye pathologies.

An array of 60,000 antibodies for proteome-scale antibody generation and target discovery

Antibodies are essential for elucidating gene function. However, affordable technology for proteome-scale antibody generation does not exist. To address this, we developed Proteome Epitope Tag Antibody Library (PETAL) and its array. PETAL consists of 62,208 monoclonal antibodies (mAbs) against 15,199 peptides from diverse proteomes. PETAL harbors binders for a great multitude of proteins in nature due to antibody multispecificity, an intrinsic antibody feature. Distinctive combinations of 10,000 to 20,000 mAbs were found to target specific proteomes by array screening. Phenotype-specific mAb-protein pairs were found for maize and zebrafish samples. Immunofluorescence and flow cytometry mAbs for membrane proteins and chromatin immunoprecipitation-sequencing mAbs for transcription factors were identified from respective proteome-binding PETAL mAbs. Differential screening of cell surface proteomes of tumor and normal tissues identified internalizing tumor antigens for antibody-drug conjugates. By finding high-affinity mAbs at a fraction of current time and cost, PETAL enables proteome-scale antibody generation and target discovery.

Protein Microarrays: Valuable Tools for Ocular Diseases Research

The eye is a complex organ comprised of several compartments with exclusive and specialized properties that reflect their diverse functions. Although the prevalence of eye pathologies is increasing, mainly because of its correlation with aging and of generalized lifestyle changes, the pathogenic molecular mechanisms of many common ocular diseases remain poorly understood. Therefore, there is an unmet need to delve into the pathogenesis, diagnosis, and treatment of eye diseases to preserve ocular health and reduce the incidence of visual impairment or blindness. Proteomics analysis stands as a valuable tool for deciphering protein profiles related to specific ocular conditions. In turn, such profiles can lead to real breakthroughs in the fields of ocular science and ophthalmology. Among proteomics techniques, protein microarray technology stands out by providing expanded information using very small volumes of samples. In this review, we present a brief summary of the main types of protein microarrays and their application for the identification of protein changes in chronic ocular diseases such as dry eye, glaucoma, age-related macular degeneration, or diabetic retinopathy. The validation of these specific protein alterations could provide new biomarkers, disclose eye diseases pathways, and help in the diagnosis and development of novel therapies for eye pathologies.

High-resolution antibody array analysis of proteins from primary human keratinocytes and leukocytes

Antibody array analysis of labeled proteomes has high throughput and is simple to perform, but validation remains challenging. Here, we used differential detergent fractionation and size exclusion chromatography in sequence for high-resolution separation of biotinylated proteins from human primary keratinocytes and leukocytes. Ninety-six sample fractions from each cell type were analyzed with microsphere-based antibody arrays and flow cytometry (microsphere affinity proteomics; MAP). Monomeric proteins and multi-molecular complexes in the cytosol, cytoplasmic organelles, membranes and nuclei were resolved as discrete peaks of antibody reactivity across the fractions. The fractionation also provided a two-dimensional matrix for assessment of specificity. Thus, antibody reactivity peaks were considered to represent specific binding if the position in the matrix was in agreement with published information about i) subcellular location, ii) size of the intended target, and iii) cell type-dependent variation in protein expression. Similarities in the reactivity patterns of either different antibodies to the same protein or antibodies to similar proteins were used as additional supporting evidence. This approach provided validation of several hundred proteins and identification of monomeric proteins and protein complexes. High-resolution MAP solves many of the problems associated with obtaining specificity with immobilized antibodies and a protein label. Thus, laboratories with access to chromatography and flow cytometry can perform large-scale protein analysis on a daily basis. This opens new possibilities for cell biology research in dermatology and validation of antibodies.

The effects of tether placement on antibody stability on surfaces

Despite their potential benefits, antibody microarrays have fallen short of performing reliably and have not found widespread use outside of the research setting. Experimental techniques have been unable to determine what is occurring on the surface of an atomic level, so molecular simulation has emerged as the primary method of investigating protein/surface interactions. Simulations of small proteins have indicated that the stability of the protein is a function of the residue on the protein where a tether is placed. The purpose of this research is to see whether these findings also apply to antibodies, with their greater size and complexity. To determine this, 24 tethering locations were selected on the antibody Protein Data Bank (PDB) ID: 1IGT. Replica exchange simulations were run on two different surfaces, one hydrophobic and one hydrophilic, to determine the degree to which these tethering sites stabilize or destabilize the antibody. Results showed that antibodies tethered to hydrophobic surfaces were in general less stable than antibodies tethered to hydrophilic surfaces. Moreover, the stability of the antibody was a function of the tether location on hydrophobic surfaces but not hydrophilic surfaces.

A supramolecular assembly enables discrimination between metalloproteins and non-metalloproteins

A supramolecular assembly yields turn-on fluorescence response for non-metalloproteins and turn-off response for metalloproteins.

Structure and Computation in Immunoreagent Design: From Diagnostics to Vaccines

Novel immunological tools for efficient diagnosis and treatment of emerging infections are urgently required. Advances in the diagnostic and vaccine development fields are continuously progressing, with reverse vaccinology and structural vaccinology (SV) methods for antigen identification and structure-based antigen (re)design playing increasingly relevant roles. SV, in particular, is predicted to be the front-runner in the future development of diagnostics and vaccines targeting challenging diseases such as AIDS and cancer. We review state-of-the-art methodologies for structure-based epitope identification and antigen design, with specific applicative examples. We highlight the implications of such methods for the engineering of biomolecules with improved immunological properties, potential diagnostic and/or therapeutic uses, and discuss the perspectives of structure-based rational design for the production of advanced immunoreagents.

Tumor tissue protein signatures reflect histological grade of breast cancer

Histological grade is one of the most commonly used prognostic factors for patients diagnosed with breast cancer. However, conventional grading has proven technically challenging, and up to 60% of the tumors are classified as histological grade 2, which represents a heterogeneous cohort less informative for clinical decision making. In an attempt to study and extend the molecular puzzle of histologically graded breast cancer, we have in this pilot project searched for additional protein biomarkers in a new space of the proteome. To this end, we have for the first time performed protein expression profiling of breast cancer tumor tissue, using recombinant antibody microarrays, targeting mainly immunoregulatory proteins. Thus, we have explored the immune system as a disease-specific sensor (clinical immunoproteomics). Uniquely, the results showed that several biologically relevant proteins reflecting histological grade could be delineated. In more detail, the tentative biomarker panels could be used to i) build a candidate model classifying grade 1 vs. grade 3 tumors, ii) demonstrate the molecular heterogeneity among grade 2 tumors, and iii) potentially re-classify several of the grade 2 tumors to more like grade 1 or grade 3 tumors. This could, in the long-term run, lead to improved prognosis, by which the patients could benefit from improved tailored care.

Precision diagnostics: moving towards protein biomarker signatures of clinical utility in cancer

Interest in precision diagnostics has been fuelled by the concept that early detection of cancer would benefit patients; that is, if detected early, more tumours should be resectable and treatment more efficacious. Serum contains massive amounts of potentially diagnostic information, and affinity proteomics has risen as an accurate approach to decipher this, to generate actionable information that should result in more precise and evidence-based options to manage cancer. To achieve this, we need to move from single to multiplex biomarkers, a so-called signature, that can provide significantly increased diagnostic accuracy. This Opinion article focuses on the progress being made in identifying protein biomarker signatures of clinical utility, using blood-based proteomics.

Advancing the global proteome survey platform by using an oriented single chain antibody fragment immobilization approach

Increasing the understanding of a proteome and how its protein composition is affected by for example different diseases, such as cancer, has the potential to improve strategies for early diagnosis and therapeutics. The Global Proteome Survey or GPS is a method that combines mass spectrometry and affinity enrichment with the use of antibodies. The technology enables profiling of complex proteomes in a species independent manner. The sensitivity of GPS, and other methods relying on affinity enrichment, is largely affected by the activity of the exploited affinity reagent. We here present an improvement of the GPS platform by utilizing an antibody immobilization approach which ensures a controlled immobilization process of the antibody to the magnetic bead support. More specifically, we make use of an antibody format that enables site-directed biotinylation and use this in combination with streptavidin coated magnetic beads. The performance of the expanded GPS platform was evaluated by profiling yeast proteome samples. We demonstrate that the oriented antibody immobilization strategy increases the ability of the GPS platform and results in larger fraction of functional antibodies. Additionally, we show that this new antibody format enabled in-solution capture, i.e. immobilization of the antibodies after sample incubation. A workflow has been established that permit the use of an oriented immobilization strategy for the GPS platform.

Technical Advances of the Recombinant Antibody Microarray Technology Platform for Clinical Immunoproteomics

In the quest for deciphering disease-associated biomarkers, high-performing tools for multiplexed protein expression profiling of crude clinical samples will be crucial. Affinity proteomics, mainly represented by antibody-based microarrays, have during recent years been established as a proteomic tool providing unique opportunities for parallelized protein expression profiling. But despite the progress, several main technical features and assay procedures remains to be (fully) resolved. Among these issues, the handling of protein microarray data, i.e. the biostatistics parts, is one of the key features to solve. In this study, we have therefore further optimized, validated, and standardized our in-house designed recombinant antibody microarray technology platform. To this end, we addressed the main remaining technical issues (e.g. antibody quality, array production, sample labelling, and selected assay conditions) and most importantly key biostatistics subjects (e.g. array data pre-processing and biomarker panel condensation). This represents one of the first antibody array studies in which these key biostatistics subjects have been studied in detail. Here, we thus present the next generation of the recombinant antibody microarray technology platform designed for clinical immunoproteomics.

Evaluation of Solid Supports for Slide- and Well-Based Recombinant Antibody Microarrays

Antibody microarrays have emerged as an important tool within proteomics, enabling multiplexed protein expression profiling in both health and disease. The design and performance of antibody microarrays and how they are processed are dependent on several factors, of which the interplay between the antibodies and the solid surfaces plays a central role. In this study, we have taken on the first comprehensive view and evaluated the overall impact of solid surfaces on the recombinant antibody microarray design. The results clearly demonstrated the importance of the surface-antibody interaction and showed the effect of the solid supports on the printing process, the array format of planar arrays (slide- and well-based), the assay performance (spot features, reproducibility, specificity and sensitivity) and assay processing (degree of automation). In the end, two high-end recombinant antibody microarray technology platforms were designed, based on slide-based (black polymer) and well-based (clear polymer) arrays, paving the way for future large-scale protein expression profiling efforts.

Direct and multiplex quantification of protein biomarkers in serum samples using an immuno-magnetic platform

A direct and ultrasensitive multiplex assay using an immuno-magnetic platform has been developed for the quantification of trace amounts of circulating cancer-associated antigens in serum.

A direct and ultrasensitive multiplex assay using an immuno-magnetic platform has been developed for the quantification of trace amounts of circulating cancer-associated antigens in serum. The detection is based on the specific immuno-interactions among the target antigen, detection antibody and capture antibody that is immobilized on the surface of magnetic nanoparticles. The sandwiched immuno-assembly is then labelled with turn-on fluorophores and detected with a fluorescence imaging system. To afford a high signal-to-noise ratio, three turn-on fluorophores with unique optical properties have been designed and synthesized to label the target antigens. The developed assay has achieved a remarkable LOD down to the femto-molar regime without sample pre-treatment. This versatile assay can efficiently differentiate the target antigen from a protein matrix and simultaneously quantify multiple cancer-associated antigens, for instance, alpha-fetoprotein (AFP), carcinoembryonic antigen (CEA), and prostate specific antigen (PSA) using only 6 μL of serum sample in an hour. This novel system has a high applicability to serve as a universal and useful tool for early disease diagnostics.

Genetic fusion of single-chain variable fragments to partial spider silk improves target detection in micro- and nanoarrays

Immobilizing biomolecules with retained functionality and stability on solid supports is crucial for generation of sensitive immunoassays. However, upon use of conventional immobilization strategies, a major portion of the biomolecules (e.g. antibodies) frequently tends to lose their bioactivity. In this study, we describe a procedure to immobilize human single-chain variable fragment (scFv) via genetic fusion to partial spider silk, which have a high tendency to adhere to solid supports. Two scFvs, directed towards serum proteins, were genetically fused to partial spider silk proteins and expressed as silk fusion proteins in E. coli. Antigen binding ability of scFvs attached to a partial silk protein denoted RC was investigated using microarray analysis, whereas scFvs fused to the NC silk variant were examined using nanoarrays. Results from micro- and nanoarrays confirmed the functionality of scFvs attached to both RC and NC silk, and also for binding of targets in crude serum. Furthermore, the same amount of added scFv gives higher signal intensity when immobilized via partial spider silk compared to when immobilized alone. Together, the results suggest that usage of scFv-silk fusion proteins in immunoassays could improve target detection, in the long run enabling novel biomarkers to be detected in crude serum proteomes.

Antibody Microarray for E. coli O157:H7 and Shiga Toxin in Microtiter Plates

Antibody microarray is a powerful analytical technique because of its inherent ability to simultaneously discriminate and measure numerous analytes, therefore making the technique conducive to both the multiplexed detection and identification of bacterial analytes (i.e., whole cells, as well as associated metabolites and/or toxins). We developed a sandwich fluorescent immunoassay combined with a high-throughput, multiwell plate microarray detection format. Inexpensive polystyrene plates were employed containing passively adsorbed, array-printed capture antibodies. During sample reaction, centrifugation was the only strategy found to significantly improve capture, and hence detection, of bacteria (pathogenic Escherichia coli O157:H7) to planar capture surfaces containing printed antibodies. Whereas several other sample incubation techniques (e.g., static vs. agitation) had minimal effect. Immobilized bacteria were labeled with a red-orange-fluorescent dye (Alexa Fluor 555) conjugated antibody to allow for quantitative detection of the captured bacteria with a laser scanner. Shiga toxin 1 (Stx1) could be simultaneously detected along with the cells, but none of the agitation techniques employed during incubation improved detection of the relatively small biomolecule. Under optimal conditions, the assay had demonstrated limits of detection of ~5.8 × 10⁵ cells/mL and 110 ng/mL for E. coli O157:H7 and Stx1, respectively, in a ~75 min total assay time.

Interfacing antibody-based microarrays and digital holography enables label-free detection for loss of cell volume

Background:

We introduce the combination of digital holographic microscopy (DHM) and antibody microarrays as a powerful tool to measure morphological changes in specifically antibody-captured cells. The aim of the study was to develop DHM for analysis of cell death of etoposide-treated suspension cells.

Results/methodology:

We demonstrate that the cell number, mean area, thickness and volume were noninvasively measured by using DHM. The cell number was stable over time, but the two cell lines showed changes of cell area and cell irregularity after treatment. The cell volume in etoposide-treated cells was decreased, whereas untreated cells showed stable volume.

Conclusion:

Our results provide proof of concept for using DHM combined with antibody-based microarray technology for detecting morphological changes in captured cells.

We use an innovative technique that combines digital holographic microscopy and the capture of cells with antibody microarrays as a powerful tool to measure cellular morphological changes. With this technique, the cells can be noninvasively viewed in 3D over time. We obtain results showing changes in cellular parameters including cell area, thickness and volume of the captured cells after treatment with the cell death-inducing drug etoposide. The cell volume in etoposide-treated cells showed a decrease, while untreated cells remained stable. Digital holographic microscopy combined with antibody microarray technology can be a future method for detecting morphological changes in treated cancer cells.

A Multicenter Trial Defining a Serum Protein Signature Associated with Pancreatic Ductal Adenocarcinoma

Background. Pancreatic ductal adenocarcinoma (PDAC) is an aggressive disease with rapid tumor progression and poor prognosis. This study was motivated by the lack of sensitive and specific PDAC biomarkers and aimed to identify a diagnostic, serum protein signature for PDAC. Methods. To mimic a real life test situation, a multicenter trial comprising a serum sample cohort, including 338 patients with either PDAC or other pancreatic diseases (OPD) and controls with nonpancreatic conditions (NPC), was analyzed on 293-plex recombinant antibody microarrays targeting immunoregulatory and cancer-associated antigens. Results. Serum samples collected from different hospitals were analyzed and showed that (i) sampling from five different hospitals could not be identified as a preanalytical variable and (ii) a multiplexed biomarker signature could be identified, utilizing up to 10 serum markers that could discriminate PDAC from controls, with sensitivities and specificities in the 91–100% range. The first protein profiles associated with the location of the primary tumor in the pancreas could also be identified. Conclusions. The results demonstrate that robust enough serum signatures could be identified in a multicenter trial, potentially contributing to the development of a multiplexed biomarker immunoassay for improved PDAC diagnosis.

Use of Caprylic Acid in Broiler Chickens: Effect on Campylobacter jejuni

The effect of caprylic acid (CA) on Campylobacter jejuni in chickens was evaluated using two approaches: dietary supplementation or surface treatment of chilled chicken carcasses. To analyze the dietary effect of CA, individually housed broiler chickens (n = 48) were artificially infected with C. jejuni VFU612 (10(6) colony-forming units [CFU]/bird) on the 21st and 35th days of life. Dietary CA (2.5 and 5 g/kg of feed, fed throughout the entire experiment) significantly decreased C. jejuni shedding (p<0.05). However, the effect only lasted for 3-7 days after infection. The numbers of Campylobacter shed by the positive control birds reached its maximum on the 37th day of life, while on that same day, both Treatment I and Treatment II groups shed significantly lower (p<0.05) numbers of Campylobacter (by 0.8 and 1.8 log10 CFU/g, respectively). Also, peak shedding was delayed by 1 day in both treated groups. After euthanasia of each chicken on the 42nd day of life, no differences in Campylobacter counts in the crop, gizzard, ileum, and cecum were found between the positive control and the treated groups (p>0.05). Surface contamination of the chilled chicken halves was performed with C. jejuni VFU612 (clinical isolate) and CCM6214 (collection strain). Surface treatment with CA at 1.25 and 2.5 mg/mL for 1 min significantly reduced C. jejuni VFU612 contamination of chicken skin (p<0.05) by 0.29-0.53 and 1.14-1.58 log10 CFU/g of skin, respectively. Counts of C. jejuni CCM6214 were reduced by 0.68-1.65 log10 CFU/g of skin). In conclusion, dietary CA affected numbers of C. jejuni in the gastrointestinal contents of chickens, whereas surface treatment reduced C. jejuni contamination in processed chicken carcasses.

Miniaturization of multiplexed planar recombinant antibody arrays for serum protein profiling

BACKGROUND

Antibody-based microarrays are a developing tool for high-throughput proteomics in health and disease. However, in order to enable global proteome profiling, novel miniaturized high-density antibody array formats must be developed.

RESULTS

In this proof-of-concept study, we have designed a miniaturized planar recombinant (single-chain Fragment variable). antibody array technology platform for multiplexed profiling of non-fractionated, directly labelled serum samples. The size of the individual spot features was reduced 225-times (78.5 μm(2)/spot) and the array density was increased 19-times (38,000 spots/cm(2)). These miniaturized, multiplexed arrays were produced, using a desktop nanofabrication system based on dip-pen nanolithography technology, and interfaced with a high-resolution fluorescent-based scanner. The reproducibility, sensitivity, specificity, and applicability of the set-up were demonstrated by profiling a set of well-characterized serum samples.

CONCLUSION

The designed antibody array platform opens up new possibilities for large-scale, multiplex profiling of crude proteomes in a miniaturized fashion.

Discovery and validation of an INflammatory PROtein-driven GAstric cancer Signature (INPROGAS) using antibody microarray-based oncoproteomics

This study aimed to improve gastric cancer (GC) diagnosis by identifying and validating an INflammatory PROtein-driven GAstric cancer Signature (hereafter INPROGAS) using low-cost affinity proteomics. The detection of 120 cytokines, 43 angiogenic factors, 41 growth factors, 40 inflammatory factors and 10 metalloproteinases was performed using commercially available human antibody microarray-based arrays. We identified 21 inflammation-related proteins (INPROGAS) with significant differences in expression between GC tissues and normal gastric mucosa in a discovery cohort of matched pairs (n=10) of tumor/normal gastric tissues. Ingenuity pathway analysis confirmed the "inflammatory response", "cellular movement" and "immune cell trafficking" as the most overrepresented biofunctions within INPROGAS. Using an expanded independent validation cohort (n = 22), INPROGAS classified gastric samples as "GC" or "non-GC" with a sensitivity of 82% (95% CI 59-94) and a specificity of 73% (95% CI 49-89). The positive predictive value and negative predictive value in this validation cohort were 75% (95% CI 53-90) and 80% (95% CI 56-94), respectively. The positive predictive value and negative predictive value in this validation cohort were 75% (95% CI 53-90) and 80% (95% CI 56-94), respectively. Antibody microarray analyses of the GC-associated inflammatory proteome identified a 21-protein INPROGAS that accurately discriminated GC from noncancerous gastric mucosa.

Preparation of molecularly imprinted polymers for the recognition of proteins via the generation of peptide-fragment binding sites by semi-covalent imprinting and enzymatic digestion

An acryloyl protein was copolymerized with a crosslinker, followed by enzymatic digestion, yielding protein imprinted polymers bearing peptide-fragment binding sites.

Identification of plasma protein profiles associated with risk groups of prostate cancer patients

PURPOSE

Early detection of prostate cancer (PC) using prostate-specific antigen (PSA) in blood reduces PC-death among unscreened men. However, due to modest specificity of PSA at commonly used cut-offs, there are urgent needs for additional biomarkers contributing enhanced risk classification among men with modestly elevated PSA.

EXPERIMENTAL DESIGN

Recombinant antibody microarrays were applied for protein expression profiling of 80 plasma samples from routine PSA-measurements, a priori divided into four risk groups, based on levels of total and %free PSA.

RESULTS

The results demonstrated that plasma protein profiles could be identified that pin-pointed PC (a malignant biomarker signature) and most importantly that showed moderate to high correlation with biochemically defined PC risk groups. Notably, the data also implied that the risk group with midrange PSA and low %free PSA, a priori known to be heterogeneous, could be further stratified into two subgroups, more resembling the lowest and highest risk groups, respectively.

CONCLUSIONS AND CLINICAL RELEVANCE

In this pilot study, we have shown that plasma protein biomarker signatures, associated with risk groups of PC, could be identified from crude plasma samples using affinity proteomics. This approach could in the longer perspective provide novel opportunities for improved risk classification of PC patients.

Molecular design of recombinant scFv antibodies for site-specific photocoupling to β-cyclodextrin in solution and onto solid support

The ability to design and tailor-make antibodies to meet the biophysical demands required by the vast range of current and future antibody-based applications within biotechnology and biomedicine will be essential. In this proof-of-concept study, we have for the first time tailored human recombinant scFv antibodies for site-specific photocoupling through the use of an unnatural amino acid (UAA) and the dock'n'flash technology. In more detail, we have successfully explored the possibility to expand the genetic code of E. coli and introduced the photoreactive UAA p-benzoyl-L-phenylalanine (pBpa), and showed that the mutated scFv antibody could be expressed in E. coli with retained structural and functional properties, as well as binding affinity. The pBpa group was then used for affinity capture of the mutated antibody by β-cyclodextrin (β-CD), which provided the hydrogen atoms to be abstracted in the subsequent photocoupling process upon irradiation at 365nm. The results showed that the pBpa mutated antibody could be site-specifically photocoupled to free and surface (array) immobilized β-CD. Taken together, this paves the way for novel means of tailoring recombinant scFv antibodies for site-specific photochemical-based tagging, functionalization and immobilization in numerous applications.

Generation of miniaturized planar ecombinant antibody arrays using a microcantilever-based printer

Miniaturized (Ø 10 μm), multiplexed (>5-plex), and high-density (>100 000 spots cm(-2)) antibody arrays will play a key role in generating protein expression profiles in health and disease. However, producing such antibody arrays is challenging, and it is the type and range of available spotters which set the stage. This pilot study explored the use of a novel microspotting tool, Bioplume(TM)-consisting of an array of micromachined silicon cantilevers with integrated microfluidic channels-to produce miniaturized, multiplexed, and high-density planar recombinant antibody arrays for protein expression profiling which targets crude, directly labelled serum. The results demonstrated that 16-plex recombinant antibody arrays could be produced-based on miniaturized spot features (78.5 um(2), Ø 10 μm) at a 7-125-times increased spot density (250 000 spots cm(-2)), interfaced with a fluorescent-based read-out. This prototype platform was found to display adequate reproducibility (spot-to-spot) and an assay sensitivity in the pM range. The feasibility of the array platform for serum protein profiling was outlined.

Protein Microarrays with Novel Microfluidic Methods: Current Advances

Microfluidic-based micromosaic technology has allowed the pattering of recognition elements in restricted micrometer scale areas with high precision. This controlled patterning enabled the development of highly multiplexed arrays multiple analyte detection. This arraying technology was first introduced in the beginning of 2001 and holds tremendous potential to revolutionize microarray development and analyte detection. Later, several microfluidic methods were developed for microarray application. In this review we discuss these novel methods and approaches which leverage the property of microfluidic technologies to significantly improve various physical aspects of microarray technology, such as enhanced imprinting homogeneity, stability of the immobilized biomolecules, decreasing assay times, and reduction of the costs and of the bulky instrumentation.

Multiplexing of miniaturized planar antibody arrays for serum protein profiling--a biomarker discovery in SLE nephritis

In the quest to decipher disease-associated biomarkers, miniaturized and multiplexed antibody arrays may play a central role in generating protein expression profiles, or protein maps, of crude serum samples. In this conceptual study, we explored a novel, 4-times larger pen design, enabling us to, in a unique manner, simultaneously print 48 different reagents (antibodies) as individual 78.5 μm(2) (10 μm in diameter) sized spots at a density of 38,000 spots cm(-2) using dip-pen nanolithography technology. The antibody array set-up was interfaced with a high-resolution fluorescent-based scanner for sensitive sensing. The performance and applicability of this novel 48-plex recombinant antibody array platform design was demonstrated in a first clinical application targeting SLE nephritis, a severe chronic autoimmune connective tissue disorder, as the model disease. To this end, crude, directly biotinylated serum samples were targeted. The results showed that the miniaturized and multiplexed array platform displayed adequate performance, and that SLE-associated serum biomarker panels reflecting the disease process could be deciphered, outlining the use of miniaturized antibody arrays for disease proteomics and biomarker discovery.

Solid-phase biological assays for drug discovery

In the past 30 years, there has been a significant growth in the use of solid-phase assays in the area of drug discovery, with a range of new assays being used for both soluble and membrane-bound targets. In this review, we provide some basic background to typical drug targets and immobilization protocols used in solid-phase biological assays (SPBAs) for drug discovery, with emphasis on particularly labile biomolecular targets such as kinases and membrane-bound receptors, and highlight some of the more recent approaches for producing protein microarrays, bioaffinity columns, and other devices that are central to small molecule screening by SPBA. We then discuss key applications of such assays to identify drug leads, with an emphasis on the screening of mixtures. We conclude by highlighting specific advantages and potential disadvantages of SPBAs, particularly as they relate to particular assay formats.

Optimizing scan parameters for antibody microarray experiments: accelerating robust systems diagnostics for life sciences

Microarray experiments are a centerpiece of postgenomics life sciences and the current efforts to develop systems diagnostics for personalized medicine. The majority of antibody microarray experiments are fluorescence-based, which utilizes a scanner to convert target signals into image files for subsequent quantification. Certain scan parameters such as the laser power and photomultiplier tube gain (PMT) can influence the readout of fluorescent intensities and thus may affect data quantitation. To date, however, there is no consensus of how to determine the optimal settings of microarray scanners. Here we show that different settings of the laser power and PMT not only affect the signal intensities but also the accuracy of antibody microarray experiments. More importantly, we demonstrate an experimental approach using two fluorescent dyes to determine optimal settings of scan parameters for microarray experiments. These measures provide added quality control of microarray experiments, and thus help to improve the accuracy of quantitative outcome in microarray experiments in the above contexts.

The Use of Antibodies in Small-Molecule Drug Discovery

Antibodies are powerful research tools that can be used in many areas of biology to probe, measure, and perturb various biological structures. Successful drug discovery is dependent on the correct identification of a target implicated in disease, coupled with the successful selection, optimization, and development of a candidate drug. Because of their specific binding characteristics, with regard to specificity, affinity, and avidity, coupled with their amenability to protein engineering, antibodies have become a key tool in drug discovery, enabling the quantification, localization, and modulation of proteins of interest. This review summarizes the application of antibodies and other protein affinity reagents as specific research tools within the drug discovery process.

Identification of B-cell lymphoma subsets by plasma protein profiling using recombinant antibody microarrays

B-cell lymphoma (BCL) heterogeneity represents a key issue, often making the classification and clinical management of these patients challenging. In this pilot study, we outlined the first resolved view of BCL disease heterogeneity on the protein level by deciphering disease-associated plasma biomarkers, specific for chronic lymphocytic leukemia, diffuse large B-cell lymphoma, follicular lymphoma, and mantle cell lymphoma, using recombinant antibody microarrays targeting mainly immunoregulatory proteins. The results showed the BCLs to be heterogeneous, and revealed potential novel subgroups of each BCL. In the case of diffuse large B-cell lymphoma, we also indicated a link between the novel subgroups and survival.

Affinity-based microarrays for proteomic analysis of cancer tissues

Based on about a decade of technical developments in analysing the human proteome with antibody microarrays and experience in performing such analyses, now there are the means at hand for detailed and simultaneously global investigations of this kind. Many technical aspects have been dealt with of both the microarray format itself - such as overcoming kinetic and mass transport limitations and thus achieving accurate measurements - and ancillary processes - such as extraction procedures that provide good protein solubilisation, produce reproducible yields and preserve the native protein conformation as much as possible. The overall analysis process is robust and reproducible, highly sensitive down to the level of single-molecule detection and permits an analysis of several parameters on many molecules at a time. While the study of body liquids is widely applied, analyses of tissue proteomes are still scarce. However, conditions do exist to perform the latter at a quality level that meets the standards for clinical applications. This review highlights methodological aspects relevant for a biomedically useful analysis of cellular samples and discusses the potential of such studies, in particular, in view of personalised medicine approaches.

Evaluation of homo- and hetero-functionally activated glass surfaces for optimized antibody arrays

Antibody arrays hold great promise for biomedical applications, but they are typically manufactured using chemically functionalized surfaces that still require optimization. Here, we describe novel hetero-functionally activated glass surfaces favoring oriented antibody binding for improved performance in protein microarray applications. Antibody arrays manufactured in our facility using the functionalization chemistries described here proved to be reproducible and stable and also showed good signal intensities. As a proof-of-principle of the glass surface functionalization protocols described in this article, we built antibody-based arrays functionalized with different chemistries that enabled the simultaneous detection of 71 human leukocyte membrane differentiation antigens commonly found in peripheral blood mononuclear cells. Such detection is specific and semi-quantitative and can be performed in a single assay under native conditions. In summary, the protocol described here, based on the use of antibody array technology, enabled the concurrent detection of a set of membrane proteins under native conditions in a specific, selective, and semi-quantitative manner and in a single assay.