Electroluminescent polymers

Thermal Degradation of Hybridize Doped Poly(Dioctylfluorene) Film with Polydimethylsiloxane

The purpose of this study is to evaluate the thermal degradation of hybridize doped poly(dioctylfluorene) (PF8) film with polydimethylsiloxane (PDMS). The hybridized PF8/PDMS films were produced using solvent casting technique. The poly(dioctylfluorene) was dissolved using chloroform and subsequently polydimethylsiloxane was added prior mixing. Three different concentrations of PF8 were used to prepare the doped film. After casting, the samples were put in an oven at 100°C for 5 minutes for curing process. Later the thermal degradation test was conducted on the prepared sample for the duration of 1 hour, 2 hours, 3 hours and 24 hours to observe the effect of temperature on the photoluminescence properties of PF8. UV-visible spectroscopy was mainly used to measure the absorption intensity of the hybridized materials. It was configured that the optimum doped concentration for PF8 with PDMS is by using 5.0×10-3 mol of PF8. This is due to a good solubility of PF8 and easy to be casted.

Structures and Materials in Stretchable Electroluminescent Devices

Stretchable electroluminescent (EL) devices are obtained by partitioning a large emission area into areas specifically for stretching and light-emission (island-bridge structure). Buckled and textile structures are also shown effective to combine the conventional light emitting diode fabrication with elastic substrates for structure-enabled stretchable EL devices. Meanwhile, intrinsically stretchable EL devices which are characterized with uniform stretchability down to microscopic scale are relatively less developed but promise simpler device structure and higher impact resistance. The challenges in fabricating intrinsically stretchable EL devices with high and robust performance are in many facets, including stretchable conductors, emissive materials, and compatible processes. For the stretchable transparent electrode, ionically conductive gel, conductive polymer coating, and conductor network in surface of elastomer are all proven useful. The stretchable EL materials are currently limited to conjugated polymers, conjugated polymers with surfactants and ionic conductors added to boost stretchability, and phosphor particles embedded in elastomer matrices. These emissive materials operate under different mechanisms, require different electrode materials and fabrication processes, and the corresponding EL devices face distinctive challenges. This review aims to provide a basic understanding of the materials meeting both the mechanical and electronic requirements and important techniques to fabricate the stretchable EL devices.

Assembly of unsymmetrical 1,3,5-triarylbenzenes via tandem reaction of β-arylethenesulfonyl fluorides and α-cyano-β-methylenones

A transition-metal-free tandem reaction of β-arylethenesulfonyl fluorides and α-cyano-β-methylenones has been revealed. In the presence of cesium carbonate, 2-arylethenesulfonyl fluorides react with α-cyano-β-methylenones through a tandem Diels-Alder cycloaddition/sulfur (VI) fluoride...

High intrinsic thermally conductivity side-chain liquid crystalline polysiloxane films grafted with pendent difunctional mesogenic groups

Herein, the microscopic ordered aggregation morphologies of SCLCP films are investigated, and molecular structures with regular arrangement can increase heat transfer via suppressing the scattering of phonons, thus greatly improving the λ of SCLCPs.

Chiral TADF-Active Polymers for High-Efficiency Circularly Polarized Organic Light-Emitting Diodes

A strategy of chiral donor-acceptor copolymerization is proposed to develop chiral nonconjugated polymers with thermally activated delayed fluorescence (TADF). Based on this strategy, two pairs of chiral polymers (R,R)-/(S,S)-pTpAcDPS and (R,R)-/(S,S)-pTpAcBP were synthesized. The alternating copolymerization of the chiral donors and acceptors could effectively separate the frontier molecular orbitals, which made the polymers show small ΔE_ST of 0.01-0.03 eV and efficient TADF properties. Moreover, the polymers also showed the quantum yield of up to 92 % and the circularly polarized luminescence. The solution-processed circularly polarized organic light-emitting diodes showed circularly polarized electroluminescence signals with high external quantum efficiencies of up to 22.1 % and maximum luminance of up to 34350 cd m^-2 . This is the first report of CP-OLEDs based on chiral TADF polymer, which provides a useful and valuable guidance for the development of high-efficiency CPEL polymers.

Direct and selective access to amino-poly(phenylene vinylenes)s with switchable properties by dimerizing polymerization of aminoaryl carbenes

Despite the ubiquity of singlet carbenes in chemistry, their utility as true monomeric building blocks for the synthesis of functional organic polymers has been underexplored. In this work, we exploit the capability of purposely designed mono- and bis-acyclic amino(aryl)carbenes to selectively dimerize as a general strategy to access diaminoalkenes and hitherto unknown amino-containing poly(p-phenylene vinylene)s (N-PPV’s). The unique selectivity of the dimerization of singlet amino(aryl)carbenes, relative to putative C-H insertion pathways, is rationalized by DFT calculations. Of particular interest, unlike classical PPV’s, the presence of amino groups in α-position of C=C double bonds in N-PPV’s allows their physico-chemical properties to be manipulated in different ways by a simple protonation reaction. Hence, depending on the nature of the amino group (iPr₂N vs. piperidine), either a complete loss of conjugation or a blue-shift of the maximum of absorption is observed, as a result of the protonation at different sites (nitrogen vs. carbon). Overall, this study highlights that singlet bis-amino(aryl)carbenes hold great promise to access functional polymeric materials with switchable properties, through a proper selection of their substitution pattern.

Despite the ubiquity of singlet carbenes in chemistry, their utility as true monomeric building blocks for the synthesis of functional organic polymers has been underexplored. Here the authors show mono- and bis-acyclic amino(aryl)carbenes selectively dimerize to form diaminoalkenes and hitherto unknown amino-containing poly(p-phenylene vinylene)s.

Ethyl 2-amino-4-methyl-thio-phene-3-carboxyl-ate

The title compound, C8H11NO2S, crystallizes with two mol-ecules, A and B, in the asymmetric unit. Each molecule features an intramolecular N-H⋯O hydrogen bond and the same H atom is also involved in an intermolecular N-H⋯S bond to generate A + B dimers. Further N-H⋯O hydrogen bonds link the dimers into a [010] chain.

Poly(Pyridinium Salt)s Containing 2,7-Diamino-9,9'-Dioctylfluorene Moieties with Various Organic Counterions Exhibiting Both Lyotropic Liquid-Crystalline and Light-Emitting Properties

A series of poly(pyridinium salt)s-fluorene main-chain ionic polymers with various organic counterions were synthesized by using ring-transmutation polymerization and metathesis reactions. Their chemical structures were characterized by Fourier Transform Infrared (FTIR), proton (¹H), and fluorine 19 (¹⁹F) nuclear magnetic resonance (NMR) spectrometers. These polymers showed a number-average molecular weight (M_ns) between 96.5 and 107.8 kg/mol and polydispersity index (PDI) in the range of 1.12–1.88. They exhibited fully-grown lyotropic phases in polar protic and aprotic solvents at different critical concentrations. Small-angle X-ray scattering for one polymer example indicates lyotropic structure formation for 60–80% solvent fraction. A lyotropic smectic phase contains 10 nm polymer platelets connected by tie molecules. The structure also incorporates a square packing motif within platelets. Thermal properties of polymers were affected by the size of counterions as determined by differential scanning calorimetry and thermogravimetric analysis measurements. Their ultraviolet-visible (UV-Vis) absorption spectra in different organic solvents were essentially identical, indicating that the closely spaced π-π* transitions occurred in their conjugated polymer structures. In contrast, the emission spectra of polymers exhibited a positive solvatochromism on changing the polarity of solvents. They emitted green lights in both polar and nonpolar organic solvents and showed blue light in the film-states, but their λ_em peaks were dependent on the size of the counterions. They formed aggregates in polar aprotic and protic solvents with the addition of water (v/v, 0–90%), and their λ_em peaks were blue shifted.

Photoluminescence Quenching of a Novel Electroconductive Poly(propylene thiophenoimine)-co-Poly(ethylenedioxy thiophene) Star Copolymer

A generation 1 poly(propylene thiophenoimine)-co-poly(ethylenedioxy thiophene) (G1PPT-co-PEDOT) star copolymer, which exhibits a strong optical absorption over a broad range in the ultraviolet–visible (UV-Vis) region and with good electro/conductive properties, was chemically prepared for the first time. Synthesis of the star copolymer, G1PPT-co-PEDOT was confirmed by spectroscopic studies. Indeed, the disappearance of the very high intensity bands, C–H bending at α-position (687 cm⁻¹), and C=N stretching (1620 cm⁻¹) in the Fourier transform infrared spectroscopy (FTIR) of G1PPT-co-PEDOT, which were initially present in the spectrum of the thiolated starting material, G1PPT, confirmed copolymerization. Furthermore, a large bathochromic shift in the onset wavelength of the UV-Vis absorbance spectra from 367 nm in G1PPT to 674 nm in G1PPT-co-PEDOT further attests of successful copolymerization. The electrochemical analysis of G1PPT-co-PEDOT achieved a highest occupied molecular orbital (HOMO) energy level value of 5.3 eV, which is reminiscent of the value for an ideal electron-donor material. Photoluminescence quenching of up to 82% was observed in solution blends of the G1PPT-co-PEDOT star copolymer and N,N′-diisopropyl naphthalene diimide (NDI). This demonstrates the occurrence of photoinduced intermolecular charge transfer (PICT) from the electron-donating G1PPT-co-PEDOT to the electron accepting NDI, a good property, beneficial for optoelectronic and photovoltaic applications.

Abdullah S, Brza MA. Conducting Polymers for Optoelectronic Devices and Organic Solar Cells: A Review

In this review paper, we present a comprehensive summary of the different organic solar cell (OSC) families. Pure and doped conjugated polymers are described. The band structure, electronic properties, and charge separation process in conjugated polymers are briefly described. Various techniques for the preparation of conjugated polymers are presented in detail. The applications of conductive polymers for organic light emitting diodes (OLEDs), organic field effect transistors (OFETs), and organic photovoltaics (OPVs) are explained thoroughly. The architecture of organic polymer solar cells including single layer, bilayer planar heterojunction, and bulk heterojunction (BHJ) are described. Moreover, designing conjugated polymers for photovoltaic applications and optimizations of highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) energy levels are discussed. Principles of bulk heterojunction polymer solar cells are addressed. Finally, strategies for band gap tuning and characteristics of solar cell are presented. In this article, several processing parameters such as the choice of solvent(s) for spin casting film, thermal and solvent annealing, solvent additive, and blend composition that affect the nano-morphology of the photoactive layer are reviewed.

Conjugated polymers as Langmuir and Langmuir-Blodgett films: Challenges and applications in nanostructured devices

Initially developed for classic systems composed of fatty acids and phospholipids, the Langmuir and Langmuir-Blodgett (LB) techniques allow the fabrication of nanometer-scale devices at self-assembly interfaces with high control over the thickness and molecular architecture. Their application in the research and production of new plastic materials has grown considerably over the past few decades due to the efficiency of conjugated polymers (CPs) for the production of light-emitting diodes, flexible displays, solar cells, and other photoelectronic devices. The structuring of polymers at different interfaces is not trivial as this class of macromolecules can undergo through different processes of folding/unfolding, which hinders the formation of stable Langmuir monolayers and, consequently, the production of Langmuir-Blodgett films. With these ideas in mind, the present article aims to review a series of elements related to the formation of stable Langmuir and Langmuir-Blodgett films of CPs, especially those based on poly(phenylene vinylene)s, polyfluorenes, and polythiophenes. This review is divided into two parts where we first discuss the formation of neat CP films, and then the strategies for the formation of stable CP films based on the co-immobilization with fatty acids, other polymers, and enzymes as mixed films.

Conjugated polymers as nanoparticle probes for fluorescence and photoacoustic imaging

In this review, the role of conjugated polymer nanoparticles (CPNs) in emerging bioimaging techniques is described.

Mapping binary copolymer property space with neural networks

The extremely large number of unique polymer compositions that can be achieved through copolymerisation makes it an attractive strategy for tuning their optoelectronic properties. However, this same attribute also makes it challenging to explore the resulting property space and understand the range of properties that can be realised. In an effort to enable the rapid exploration of this space in the case of binary copolymers, we train a neural network using a tiered data generation strategy to accurately predict the optical and electronic properties of 350 000 binary copolymers that are, in principle, synthesizable from their dihalogen monomers via Yamamoto, or Suzuki-Miyaura and Stille coupling after one-step functionalisation. By extracting general features of this property space that would otherwise be obscured in smaller datasets, we identify simple models that effectively relate the properties of these copolymers to the homopolymers of their constituent monomers, and challenge common ideas behind copolymer design. We find that binary copolymerisation does not appear to allow access to regions of the optoelectronic property space that are not already sampled by the homopolymers, although it conceptually allows for more fine-grained property control. Using the large volume of data available, we test the hypothesis that copolymerisation of 'donor' and 'acceptor' monomers can result in copolymers with a lower optical gap than their related homopolymers. Overall, despite the prevalence of this concept in the literature, we observe that this phenomenon is relatively rare, and propose conditions that greatly enhance the likelihood of its experimental realisation. Finally, through a 'topographical' analysis of the co-polymer property space, we show how this large volume of data can be used to identify dominant monomers in specific regions of property space that may be amenable to a variety of applications, such as organic photovoltaics, light emitting diodes, and thermoelectrics.

High-Throughput Screening Approach for the Optoelectronic Properties of Conjugated Polymers

We propose a general high-throughput virtual screening approach for the optical and electronic properties of conjugated polymers. This approach makes use of the recently developed xTB family of low-computational-cost density functional tight-binding methods from Grimme and co-workers, calibrated here to (Time-Dependent) Density Functional Theory ((TD)DFT) data computed for a representative diverse set of (co)polymers. Parameters drawn from the resulting calibration using a linear model can then be applied to the xTB derived results for new polymers, thus generating near DFT-quality data with orders of magnitude reduction in computational cost. As a result, after an initial computational investment for calibration, this approach can be used to quickly and accurately screen on the order of thousands of polymers for target applications. We also demonstrate that the (opto)electronic properties of the conjugated polymers show only a very minor variation when considering different conformers and that the results of high-throughput screening are therefore expected to be relatively insensitive with respect to the conformer search methodology applied.

Conjugated Polymers Containing BODIPY and Fluorene Units for Sensitive Detection of CN- Ions: Site-Selective Synthesis, Photo-Physical and Electrochemical Properties

Conjugated polymers containing distinct molecular units are expected to be very interesting because of their unique properties endowed by these units and the formed conjugated polymers. Herein, four new conjugated copolymers based on fluorene and 4,4’-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) have been designed and synthesized via Sonogashira polymerization. The fluorene unit was attached to the 3,5- or 2,6-positions of BODIPY by ethynylenes or p-diacetylenebenzene. The obtained polymers show good thermal stability and broad absorption in the wavelength range from 300 to 750 nm. The effects of site-selective copolymerization and conjugation length along the polymer backbone on the optoelectronic and electrochemical properties of these copolymers were systematically studied by UV-Vis spectroscopy, photoluminescence (PL) and cyclic voltammetry. Besides, it is found that the BODIPY-based copolymers exhibit selectively sensitive responses to cyanide anions, resulting in obvious change of UV-Vis absorption spectra and significant fluorescence quenching of the polymers among various common anions.

Bright conjugated polymer nanoparticles containing a biodegradable shell produced at high yields and with tuneable optical properties by a scalable microfluidic device

This study compares the performance of a microfluidic technique and a conventional bulk method to manufacture conjugated polymer nanoparticles (CPNs) embedded within a biodegradable poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide) (PEG_5K-PLGA_55K) matrix. The influence of PEG_5K-PLGA_55K and conjugated polymers cyano-substituted poly(p-phenylene vinylene) (CN-PPV) and poly(9,9-dioctylfluorene-2,1,3-benzothiadiazole) (F8BT) on the physicochemical properties of the CPNs was also evaluated. Both techniques enabled CPN production with high end product yields (∼70-95%). However, while the bulk technique (solvent displacement) under optimal conditions generated small nanoparticles (∼70-100 nm) with similar optical properties (quantum yields ∼35%), the microfluidic approach produced larger CPNs (140-260 nm) with significantly superior quantum yields (49-55%) and tailored emission spectra. CPNs containing CN-PPV showed smaller size distributions and tuneable emission spectra compared to F8BT systems prepared under the same conditions. The presence of PEG_5K-PLGA_55K did not affect the size or optical properties of the CPNs and provided a neutral net electric charge as is often required for biomedical applications. The microfluidics flow-based device was successfully used for the continuous preparation of CPNs over a 24 hour period. On the basis of the results presented here, it can be concluded that the microfluidic device used in this study can be used to optimize the production of bright CPNs with tailored properties with good reproducibility.

High Brightness Fluorescent White Polymer Light-Emitting Diodes by Promoted Hole Injection via Reduced Barrier by Interfacial Dipole Imparted from Chlorinated Indium Tin Oxide to the Hole Injection Layer PEDOT:PSS

We demonstrated that introducing poly(3,4-ethylenedioxythiophene) polystyrene sulfonate as a hole transport layer (HTL) on top of chlorinated indium tin oxide (Cl-ITO) anode can lead to a deeper highest occupied molecular orbital level of the HTL (promoting from 5.22 to 5.42 eV) due to the interfacial dipole imparted by the Cl-ITO, which allows barrier-free hole injection to the emitting layer with polyspirobifluorene doped with the yellow emitter rubrene and significantly prevents excitons quenching by residual chlorine radicals on the surface of Cl-ITO. By use of poly[9,9-bis(6'-(18-crown-6)methoxy)hexyl)fluorene] chelating to potassium ion (PFCn6:K⁺) as electron injection layer and air-stable high work function (E_Φ) metal aluminum as the cathode, the performance of fluorescent white polymer light-emitting diode (WPLED) achieves the high maximum brightness (B_max) of 61 523 cd/m² and maximum luminance efficiency (η_L, _max) of 10.3 cd/A. Replacing PFCn6:K⁺/Al cathode by CsF/Al, the B_max and η_L, _max are promoted to 87 615 cd/m² (the record value in WPLED) and 11.1 cd/A, respectively.

Highly emissive carbazole-functionalized homopoly(spirobifluorene) for deep-blue polymer light-emitting diodes

By fully replacing the alkyloxy side chain with a carbazole, a highly emissive homopolymer P(Cz-SF) is developed for deep-blue PLEDs.

Enhanced photoluminescence from gold nanoparticle decorated polyaniline nanowire bundles

Enhanced emission is observed from a nanocomposite consisting of conducting polyaniline nanowire bundles decorated with gold nanoparticles synthesized by simple physical blending and in situ interfacial polymerization techniques.

Unusual emission properties of the selected organosilicon compounds containing a styryl-carbazole chromophore: inversion of the singlet excited states

The presence of the silicon atom in a trimethylsilyl-styryl-carbazole derivative induced the inversion of the lowest excited states in polar solvents.

Inkjet Printing of Functional Materials for Optical and Photonic Applications

Inkjet printing, traditionally used in graphics, has been widely investigated as a valuable tool in the preparation of functional surfaces and devices. This review focuses on the use of inkjet printing technology for the manufacturing of different optical elements and photonic devices. The presented overview mainly surveys work done in the fabrication of micro-optical components such as microlenses, waveguides and integrated lasers; the manufacturing of large area light emitting diodes displays, liquid crystal displays and solar cells; as well as the preparation of liquid crystal and colloidal crystal based photonic devices working as lasers or optical sensors. Special emphasis is placed on reviewing the materials employed as well as in the relevance of inkjet in the manufacturing of the different devices showing in each of the revised technologies, main achievements, applications and challenges.

Controlled/living polymerization towards functional poly(p-phenylene vinylene) materials

Poly(p-phenylene vinylene)s (PPVs) are an important class of highly fluorescent polymeric semiconductor materials.