Urea Metal–Organic Frameworks as Effective and Size-Selective Hydrogen-Bond Catalysts

Preparation of two new chiral metal-organic frameworks for lipase immobilization and their use as biocatalysis in the enantioselective hydrolysis of racemic naproxen methyl ester

Considering the selective pharmacological activity of chiral drugs, it is important to develop new chiral materials to synthesize them. In this work, two new chiral MOFs (UiO-66@Np and UiO-66@Ib) were prepared by the covalent attachment of the chiral compounds (S-naproxen and S-ibuprofen) to the amine-functionalized Zr-MOF (UiO-66-NH2). Then, Candida rugosa lipase (CRL) was immobilized on these chiral MOFs to fabricate two new biocomposites (UiO-66@Np@CRL and UiO-66@Ib@CRL) as effective biocatalysts, which enable significant enhancement in the catalytic activity and enantioselectivity of lipase. The FTIR, SEM, EDX, TGA, and PXRD analyses were carried out to confirm the formation of the biocomposites. The catalytic performances of the biocomposites (UiO-66@Np@CRL and UiO-66@Ib@CRL) were evaluated in the typical hydrolysis of p-nitro-phenyl palmitate (p-NPP) and the catalytic enantioselective hydrolysis of (R,S)-naproxen methyl ester. Under optimal conditions, UiO-66@Np@CRL showed a higher enantiomeric excess of the substrate (ees) value and a 98 % and 50 % conversion rate, respectively, than that of UiO-66@Ib@CRL. Besides, an excellent enantioselectivity (E) value of 458 was obtained in the presence of the biocomposite (UiO-66@Np@CRL). In addition, it was observed that the catalytic activity, conversion rate and ees value of this composite (UiO-66@Np@CRL) remained almost unchanged in reuse after 6 months. The results showed that in enantioselective reactions, the highest conversion and enantioselectivity could be achieved when the chiral compound bound to the MOF and the model compound used are the same.

Synthesis and characterization of cis and trans cobalt(II) nalidixate complexes having a 1-(4-chlorophenyl)-3-(pyridin-4-ylmethyl)urea ligand

The synthesis and characterization of specific cis- and trans-isomers of a cobalt(II) bis-nalidixate complex with a pyridine-based urea, 1-(4-chlorophenyl)-3-(pyridin-4-ylmethyl)urea (L), ligand are reported. The two isomers, cis-[Co(L)2(NALD)2]·0.5DMF·H2O and trans-[Co(L)2(NALD)2]·2DMF·2H2O (the nalidixate anion is abbreviated to NALD) were prepared by anion-guided synthesis. When cobalt(II) chloride was used as one of the reactants, the reaction yielded the trans-isomer under ambient reaction conditions. Whereas a reaction using cobalt(II) nitrate provided only the cis-isomer when the reaction was continued for a prolonged time. On the other hand, the cis-isomer was converted to the trans-isomer in solution upon treatment with chloride ions. The chloride-assisted formation of the trans-isomer was investigated by a UV-visible study, and it passed through a bond reorganization by forming a tetrahedral intermediate complex. A DFT calculation was carried out to show the difference in energy between the isomers as well as the energy of a plausible tetrahedral cobalt complex. The aggregation behavior of the cis-isomer in different solvents was investigated, and solvent-dependent aggregation and a solvent-dependent Cotton effect were observed.

Hydrogen-Bond-Enhanced Photoreforming of Biomass Furans over a Urea-Incorporated Cu(II) Porphyrin Framework

Solar-driven upgrading of biomass-derived 5-hydroxylmethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) holds great promise for sustainable production of bio-plastics and resins. However, the process is limited by poor selectivity and sluggish kinetics due to the vertical coordination of HMF at relatively strong metal sites. Here, we purposely developed a Cu(II) porphyrin framework featuring side-chain incorporated urea linkages, denoted as TBUPP-Cu MOF, to render HMF a weak hydrogen bond at the urea site and flat adsorption via π-π stacking with the benzene moiety. The unique configuration promotes the approaching of -CHO of HMF to the photoexcited porphyrin ring towards kinetically and thermodynamically favourable intermediate formation and subsequent desorption. The charge localisation and orbital energy alignment enable the selective activation of O2 over the porphyrin to generate ⋅O2 - and 1O2 instead of highly oxidative H2O2 and ⋅OH via spin-flip electron transfer, which drive the ambient oxidation of proximal -CHO. The effective utilisation of redox species and circumvented over-oxidation facilitate a FDCA selectivity of >90 % with a high turnover number of 193 molHMF molCu -1. The facile purification of high-purity FDCA and zero-waste recycling of intermediates and durable catalyst feature TBUPP-Cu MOF a promising photo-oxidation platform towards net-zero biorefining and organic transformations.

2D Graphene Oxide Membrane Nanoreactors for Rapid Directional Flow Ring-Opening Reactions with Dominant Same-Configuration Products

Nanoconfinement within enzymes can increase reaction rate and improve selectivity under mild conditions. However, it remains a great challenge to achieve chemical reactions imitating enzymes with directional molecular motion, short reaction time, ≈100% conversion, and chiral conversion in artificial nanoconfined systems. Here, directional flow ring-opening reactions of styrene oxide and alcohols are demonstrated with ≈100% conversion in <120 s at 22 °C using graphene oxide membrane nanoreactors. Dominant products have the same configuration as chiral styrene oxide in confined reactions, which is dramatically opposed to bulk reactions. The unique chiral conversion mechanism is caused by spatial confinement, limiting the inversion of benzylic chiral carbon. Moreover, the enantiomeric excess of same-configuration products increased with higher alkyl charge in confined reactions. This work provides a new route to achieve rapid flow ring-opening reactions with specific chiral conversion within 2D nanoconfined channels, and insights into the impact of nanoconfinement on ring-opening reaction mechanisms.

Isoreticular Metal-Organic Frameworks Confined Mononuclear Ru-Hydrides Enable Highly Efficient Shape-Selective Hydrogenolysis of Polyolefins

Upcycling nonbiodegradable plastics such as polyolefins is paramount due to their ever-increasing demand and landfills after usage. Catalytic hydrogenolysis is highly appealing to convert polyolefins into targeted value-added products under mild reaction conditions compared with other methods, such as high-temperature incineration and pyrolysis. We have developed three isoreticular zirconium UiO-metal-organic frameworks (UiO-MOFs) node-supported ruthenium dihydrides (UiO-RuH2), which are efficient heterogeneous catalysts for hydrogenolysis of polyethylene at 200 °C, affording liquid hydrocarbons with a narrow distribution and excellent selectivity via shape-selective catalysis. UiO-66-RuH2 catalyzed hydrogenolysis of single-use low-density polyethylene (LDPE) produced a C12 centered narrow bell-shaped distribution of C8-C16 alkanes in >80% yield and 90% selectivity in the liquid phase. By tuning the pore sizes of the isoreticular UiO-RuH2 MOF catalysts, the distribution of the products could be systematically altered, affording different fuel-grade liquid hydrocarbons from LDPE in high yields. Our spectroscopic and theoretical studies and control experiments reveal that UiO-RuH2 catalysts enable highly efficient upcycling of plastic wastes under mild conditions owing to their unique combination of coordinatively unsaturated single-site Ru-active sites, uniform and tunable pores, well-defined porous structure, and superior stability. The kinetics and theoretical calculations also identify the C-C bond scission involving β-alkyl transfer as the turnover-limiting step.

Tetraphenylethene-Based Cross-Linked Conjugated Polymer Nanoparticles for Efficient Detection of 2,4,6-Trinitrophenol in Aqueous Phase

The cross-linked conjugated polymer poly(tetraphenylethene-co-biphenyl) (PTPEBP) nanoparticles were prepared by Suzuki-miniemulsion polymerization. The structure, morphology, and pore characteristics of PTPEBP nanoparticles were characterized by FTIR, NMR, SEM, and nitrogen adsorption and desorption measurements. PTPEBP presents a spherical nanoparticle morphology with a particle size of 56 nm; the specific surface area is 69.1 m2/g, and the distribution of the pore size is centered at about 2.5 nm. Due to the introduction of the tetraphenylethene unit, the fluorescence quantum yield of the PTPEBP nanoparticles reaches 8.14% in aqueous dispersion. Combining the porosity and nanoparticle morphology, the fluorescence sensing detection toward nitroaromatic explosives in the pure aqueous phase has been realized. The Stern-Volmer quenching constant for 2,4,6-trinitrophenol (TNP) detection is 2.50 × 104 M-1, the limit of detection is 1.07 μM, and the limit of quantification is 3.57 μM. Importantly, the detection effect of PTPEBP nanoparticles toward TNP did not change significantly after adding other nitroaromatic compounds, indicating that the anti-interference and selectivity for TNP detection in aqueous media is remarkable. In addition, the spike recovery test demonstrates the potential of PTPEBP nanoparticles for detecting TNP in natural environmental water samples.

MOFganic Chemistry: Challenges and Opportunities for Metal-Organic Frameworks in Synthetic Organic Chemistry

Metal-organic frameworks (MOFs) are porous, crystalline solids constructed from organic linkers and inorganic nodes that have been widely studied for applications in gas storage, chemical separations, and drug delivery. Owing to their highly modular structures and tunable pore environments, we propose that MOFs have significant untapped potential as catalysts and reagents relevant to the synthesis of next-generation therapeutics. Herein, we outline the properties of MOFs that make them promising for applications in synthetic organic chemistry, including new reactivity and selectivity, enhanced robustness, and user-friendly preparation. In addition, we outline the challenges facing the field and propose new directions to maximize the utility of MOFs for drug synthesis. This perspective aims to bring together the organic and MOF communities to develop new heterogeneous platforms capable of achieving synthetic transformations that cannot be replicated by homogeneous systems.

Bioinspired Framework Catalysts: From Enzyme Immobilization to Biomimetic Catalysis

Enzymatic catalysis has fueled considerable interest from chemists due to its high efficiency and selectivity. However, the structural complexity and vulnerability hamper the application potentials of enzymes. Driven by the practical demand for chemical conversion, there is a long-sought quest for bioinspired catalysts reproducing and even surpassing the functions of natural enzymes. As nanoporous materials with high surface areas and crystallinity, metal-organic frameworks (MOFs) represent an exquisite case of how natural enzymes and their active sites are integrated into porous solids, affording bioinspired heterogeneous catalysts with superior stability and customizable structures. In this review, we comprehensively summarize the advances of bioinspired MOFs for catalysis, discuss the design principle of various MOF-based catalysts, such as MOF-enzyme composites and MOFs embedded with active sites, and explore the utility of these catalysts in different reactions. The advantages of MOFs as enzyme mimetics are also highlighted, including confinement, templating effects, and functionality, in comparison with homogeneous supramolecular catalysts. A perspective is provided to discuss potential solutions addressing current challenges in MOF catalysis.

Combined effects of Pt nanoparticles and oxygen vacancies to promote photothermal catalytic degradation of toluene

Pt/Mn-TiO₂ photothermal catalysts with abundant oxygen vacancies are prepared by loading Pt onto a composite of MnO_x and TiO₂ using MIL-125 as precursor (abbreviated as Mn-TiO₂) and subsequent hydrogen reduction treatment. Under light irradiation with intensity of 625 mW/cm², the optimal 0.65Pt/Mn-TiO₂ catalyst can achieve toluene conversion of 90.4 % and CO₂ yield of 85.6 %, respectively, and maintain stable activity for at least 30 h in the presence of coke and water. The introduction of Pt nanoparticles improves the utilization of solar spectrum and facilitates the generation of more oxygen vacancies. The comparative experiments of photothermal catalysis and thermal catalysis further verify that light not only acts as a heat source but also enhances catalytic reaction through photocatalysis and photoactivation of lattice oxygen. In the follow-up work, catalytic oxidation under natural sunlight is performed on 0.65Pt/Mn-TiO₂ to reach 75.0 % of toluene conversion, displaying a good practical application potential.

Investigation of the Influence of Functionalization Strategy on Urea 2D MOF Catalytic Performance

Urea-functionalized MOFs with unique properties have recently been used as efficient platforms to conduct organocatalytic reactions. To gain more insight into the key factors which govern an efficient organocatalytic reaction in urea-MOFs, two different urea-containing 2D MOFs TMU-58 ([Zn(L1)(oba)].CH₃CN) and TMU-83 ([Zn(L2)(oba)].DMF), where L1 = (1E,5E)-1,5-bis(1-(pyridine-4-ylethylidene)carbonohydrazide, L2 = (1E,5E)-1,5-bis(1-(pyridine-4-ylmethylene)carbonohydrazide, and oba = 4,4'-oxybisbenzoic acid, with abundant accessible active sites, were selected and examined in the methanolysis of styrene oxide. TMU-58 with the ability to form a two-point H-bond with different substrates revealed a high organocatalytic efficiency in the regioselective ring opening of styrene oxide. The catalytic activation of epoxide oxygen by the urea N-H functional sites, followed by the nucleophilic attack of methanol at the benzylic carbon led to the formation of 2-methoxy-2-phenylethanol as the major product. DFT calculations were also performed to investigate the acidic strength of the urea hydrogens in both TMU-58 and TMU-83 structures as a major factor to conduct an efficient catalytic reaction. The results indicated the more acidic nature of the urea hydrogens in TMU-83; however, its catalytic efficiency was remarkably reduced due to the inappropriate orientation of the active interaction sites within the framework revealing the importance of proper orientation of the urea hydrogens in conducting an efficient organocatalytic reaction. The current study provides a comparative study on the function-property relationship in 2D MOF assemblies which has not been explored so far.

Largely Entangled Diamondoid Framework with High-Density Urea and Divergent Metal Nodes for Selective Scavenging of CO2 and Molecular Dimension-Mediated Size-Exclusive H-Bond Donor Catalysis

Pore environment modulation with high-density polarizing groups in metal-organic frameworks (MOFs) can effectively accomplish selective and multicyclic carbon dioxide (CO₂) adsorption, whereas the incorporation of task-specific organic sites inside these porous vessels promise to evade self-quenching, solubility, and recyclability issues in hydrogen-bond donating (HBD) catalysis. However, concurrent amalgamation of both these attributes over a single platform is rare but extremely demanding in view of sustainable applications. We designed a robust diamondoid framework CSMCRI-17 (CSMCRI = Central Salt and Marine Chemicals Research Institute) from the mixed-ligand assembly of azo group-containing dicarboxylate ligand, urea-functionalized pyridyl linker, and Zn(II) nodes with specific divergent coordination. Seven-fold interpenetration to the microporous structure largely augments N-rich functionality that facilitates high CO₂ uptake in the activated form (17a) with good CO₂ selectivity over N₂ and CH₄ that outperform many reported materials. The framework displays very strong CO₂ affinity and no reduction in adsorption capacity over multiple uptake-release cycles. Benefitting from the pore-wall decoration with urea functionality from the pillaring strut, 17a further demonstrates hydrogen-bond-mediated Friedel-Crafts alkylation of indole with β-nitrostyrene under mild conditions, with multicyclic usability and excellent reactivity toward wide ranges of substituted nucleophiles and electrophiles. Interestingly, interpenetration-generated optimum-sized pores induce poor conversion to sterically encumbered substrate via molecular dimension-mediated size selectivity that is alternatively ascribed from additional control experiments and support the occurrence of HBD reaction within the MOF cavity. The catalytic path is detailed in light of the change of emission intensity of the framework by the electrophile as well as the judicious choice of the substrate, which authenticates the prime role of urea moiety-governed two-point hydrogen bonding.

Defined metal atom aggregates precisely incorporated into metal-organic frameworks

Nanosized metal aggregates (MAs), including metal nanoparticles (NPs) and nanoclusters (NCs), are often the active species in numerous applications. In order to maintain the active form of MAs in "use", they need to be anchored and stabilised, preventing agglomeration. In this context, metal-organic frameworks (MOFs), which exhibit a unique combination of properties, are of particular interest as a tunable and porous matrix to host MAs. A high degree of control in the synthesis towards atom-efficient and application-oriented MA@MOF composites is required to derive specific structure-property relationships and in turn to enable design of functions on the molecular level. Due to the versatility of MA@MOF (derived) materials, their applications are not limited to the obvious field of catalysis, but increasingly include 'out of the box' applications, for example medical diagnostics and theranostics, as well as specialised (bio-)sensoring techniques. This review focuses on recent advances in the controlled synthesis of MA@MOF materials en route to atom-precise MAs. The main synthetic strategies, namely 'ship-in-bottle', 'bottle-around-ship', and approaches to achieve novel hierarchical MA@MOF structures are highlighted and discussed while identifying their potential as well as their limitations. Hereby, an overview of standard characterisation methods that enable a systematic analysis procedure and state-of-art techniques that localise MA within MOF cavities are provided. While the perspectives of MA@MOF materials in general have been reviewed various times in the recent past, few atom-precise MAs inside MOFs have been reported so far, opening opportunities for future investigation.

Schiff base compounds as artificial metalloenzymes

Much research has been done on traditional homogeneous metal catalysts and enzymatic catalysts, but recently a new class of hybrid catalysts called synthetic (artificial) metalloenzymes has been considered by researchers. Metalloenzymes as hybrid catalysts (host-guest systems) have been shown that combine the properties of a homogeneous and also enzymatic catalyst. The hybrid catalyst will have added value such as enantioselectivity or chemo-selectivity. This review focuses on Schiff base complexes that either act as homogeneous artificial enzymes or contribute to the structure of a host in the preparation of hybrid metalloenzymes. Because this approach can virtually be applied to any bio- or synthetic host or guest coordination complex, the details of hybrid catalysts seem important for advance in catalysis.

Synthesis of various dimensional metal organic frameworks (MOFs) and their hybrid composites for emerging applications - A review

Metal organic frameworks (MOFs) represent the organic and inorganic hybrid porous materials. MOFs are low dense and highly porous materials which in turn provide large surface area that can accumulate and store numerous molecules within the pores. The pore size may also act as a mesh to separate molecules. The porous nature of MOFs is beneficial for altering the intrinsic properties of the materials. Over the past decade, different types of hybrid MOFs have been reported in combination with polymers, carbon materials, metal nanoparticles, metal oxides, and biomolecules for various applications. MOFs have also been used in the fabrication of electronic devices, sensors, energy storage, gas separation, supercapacitors, drug delivery and environmental clean-up. In this review, the unique structural orientation, exceptional properties and recent applications of MOFs have been discussed in the first section along with their porosity, stability and other influencing factors. In addition, various methods and techniques involved in the synthesis and designing of MOFs such as solvothermal, electrochemical, mechanochemical, ultrasonication and microwave methods are highlighted. In order to understand the scientific feasibility of MOFs in developing new products, various strategies have been applied to obtain different dimensional MOFs (0D, 1D, 2D and 3D) and their composite materials are also been conferred. Finally, the future prospects of MOFs, remaining challenges, research gaps and possible solutions that need to be addressed by advanced experimental design, computational models, simulation techniques and theoretical concepts have been deliberated.

Electrocatalytic reduction of 4-nitrophenol over Ni-MOF/NF: understanding the self-enrichment effect of H-bonds

The chemical adsorption and active sites play a key role in electrocatalysis, so Ni-MOF/nickel foam was fabricated for efficiently reducing 4-nitrophenol (4-NP) without any sacrificial agents. The coordinated water molecules induced the formation of hydrogen bonds (H-bonds) with the nitro group, contributing to the self-enrichment of 4-NP. The reaction rate reached 0.351 μmol min^-1 mg^-1. Therefore, this work provides a new insight into the H-bond effect in the field of electrocatalysis.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Urea-engineering mediated hydrogen-bond donating Friedel−Crafts alkylation of indoles and nitroalkenes in dual-functionalized and microporous metal-organic framework with high recyclability and pore-fitting-induced size-selectivity

As an effective alternative to Lewis acid activation, hydrogen-bond donating (HBD) organo-catalysis denotes a powerful construction tool to important classes of carbon–carbon bonds, wherein metal-organic frameworks (MOFs) alleviate issues like...

An efficient and recyclable Cu@UiO-67-BPY catalyst for the selective oxidation of alcohols and the epoxidation of olefins

A novel CuCl2-UiO-67-BPY catalyst was synthesized for catalytic oxidation with up to 99% yield and 99% selectivity.

Functional Porphyrinic Metal-Organic Framework as a New Class of Heterogeneous Halogen-Bond-Donor Catalyst

Biomimetic metal-organic frameworks have attracted great attention as they can be used as bio-inspired models, allowing us to gain important insights into how large biological molecules function as catalysts. In this work, we report the synthesis and utilization of such a metal-metalloporphyrin framework (MMPF) that is constructed from a custom-designed ligand as an efficient halogen bond donor catalyst for Diels-Alder reactions under ambient conditions. The implementation of fabricated halogen bonding capsule as binding pocket with high-density C-Br bonds enabled the use of halogen bonding to facilitate organic transformations in their three-dimensional cavities. Through combined experimental and computational studies, we showed that the substrate molecules diffuse through the pores of the MMPF, establishing a host-guest system via the C-Br⋅⋅⋅π interaction. The formation of halogen bonds is a plausible explanation for the observed boosted catalytic efficiency in Diels-Alder reactions. Moreover, the unique capability of MMPF highlights new opportunities in using artificial non-covalent binding pockets as highly tunable and selective catalytic materials.

Metal-organic frameworks as catalytic selectivity regulators for organic transformations

Selective organic transformations using metal-organic frameworks (MOFs) and MOF-based heterogeneous catalysts have been an intriguing but challenging research topic in both the chemistry and materials communities. Analogous to the reaction specificity achieved in enzyme pockets, MOFs are also powerful platforms for regulating the catalytic selectivity via engineering their catalytic microenvironments, such as metal node alternation, ligand functionalization, pore decoration, topology variation and others. In this review, we provide a comprehensive introduction and discussion about the role of MOFs played in regulating and even boosting the size-, shape-, chemo-, regio- and more appealing stereo-selectivity in organic transformations. We hope that it will be instructive for researchers in this field to rationally design, conveniently prepare and elaborately functionalize MOFs or MOF-based composites for the synthesis of high value-added organic chemicals with significantly improved selectivity.

Synthesis and practical applications of 2-(2-nitroalkyl)pyrroles

Functionalization of pyrroles introducing a 2-nitroalkyl moiety allows the formation of nitro-containing compounds to be used as pivotal intermediates for the synthesis of bioactive compounds. The reaction of pyrroles with nitroalkenes under the Friedel-Crafts conditions allows a direct entry to 2-(2-nitroalkyl)pyrroles. This approach can also be used for the preparation of enantioenriched derivatives exploiting asymmetric catalysis. In a complementary fashion, the Henry reaction between 2-formylpyrroles and nitroalkanes generates the corresponding nitroaldol products which upon dehydration and reduction of the intermediate 2-pyrrolylnitroethene efficiently afford 2-(2-nitroalkyl)pyrroles. This review article summarizes the most relevant procedures for the preparation of 2-(2-nitroalkyl)pyrroles during the last two decades as well as their significant practical applications.

MIL-101(Cr), an Efficient Heterogeneous Catalyst for One Pot Synthesis of 2,4,5-tri Substituted Imidazoles under Solvent Free Conditions

A chromium-containing metal-organic framework (MOF), MIL-101 (Chromium(III) benzene-1,4-dicarboxylate), was used to catalyze the one pot, three component synthesis of some 2,4,5-trisubstituted imidazoles under solvent-free conditions. The advantages of using this heterogeneous catalyst include short reaction time, high yields, easy and quick isolation of catalyst and products, low amount of catalyst needed, and that the addition of solvent, salt, and additives are not needed. This catalyst is highly efficient and can be recovered at least 5 times with a slight loss of efficiency. The structure of the metal-organic frameworks (MOF) was confirmed by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (HNMR) were performed to confirm some of the synthesized products. Experimental data indicated that the optimum amount of catalyst was 5 mg for benzil (1 mmol), 4-chlorobenzaldehyde (1 mmol), and ammonium acetate (2.5 mmol), and the synthetic route to the various imidazoles is performed in 10 min by 95% yield, an acceptable result rivalling those of other catalysts.

Effective adsorption of mercury by Zr(IV)-based metal-organic frameworks of UiO-66-NH2 from aqueous solution

In this study, Zr-based metal-organic frameworks (MOFs) of UiO-66 and UiO-66-NH₂ were synthesized and applied to removal of mercury from aqueous solution. The characterizations of UiO-66 and UiO-66-NH₂ were examined by X-ray diffraction (XRD), scanning electron microscope (SEM), and thermogravimetric analysis (TGA). To investigate the adsorption properties of UiO-66-NH₂ for mercury, the experiments of kinetics, isotherm, pH, temperature, and salt concentration were conducted, and the results were compared with those by UiO-66. The result showed that UiO-66-NH₂ has a higher adsorption capacity for mercury than UiO-66. The maximum adsorption capacity of UiO-66-NH₂ was 223.8 ± 17.8 mg g^-1 at 313 K. The salt concentration of NaCl has a significant effect on the adsorption of mercury on UiO-66, while UiO-66-NH₂ can maintain the stable adsorption capacity for mercury in the concentration range of 0.1-0.5 M NaCl. Adsorption thermodynamics result indicated that the adsorption process of mercury on UiO-66-NH₂ was spontaneous and endothermic. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses showed that the mercury was successfully adsorbed on the surface of UiO-66-NH₂ and amino functional group as a soft base played a major role to react with mercury during the adsorption process. Graphical abstract.

Recent Advances in the Application of Metal–Organic Frameworks for Polymerization and Oligomerization Reactions

Polymers have become one of the major types of materials that are essential in our daily life. The controlled synthesis of value-added polymers with unique mechanical and chemical properties have attracted broad research interest. Metal–organic framework (MOF) is a class of porous material with immense structural diversity which offers unique advantages for catalyzing polymerization and oligomerization reactions including the uniformity of the catalytic active site, and the templating effect of the nano-sized channels. We summarized in this review the important recent progress in the field of MOF-catalyzed and MOF-templated polymerizations, to reveal the chemical principle and structural aspects of these systems and hope to inspire the future design of novel polymerization systems with improved activity and specificity.

Bi-functional hydrogen and coordination bonding surfactant: A novel and promising collector for improving the separation of calcium minerals

Mono-functional chelating collectors exhibit limited selectivity in the flotation of minerals. In particular, the selective separation of calcium minerals presents a significant challenge because mono-functional chelating collectors, such as fatty acid, indistinguishably adsorb onto mineral surfaces by coordinating with the same metal cation (Ca²⁺). Thus, there is an urgent need to develop new-mode-functional collectors to separate calcium minerals and a need to understand the underlying chemoselectivity. Given the difference of the hydrogen bonding ability of anions with fluorite, calcite and scheelite surfaces, the introduction of additional hydrogen bonding functional groups into collector molecules is a novel strategy to improve selectivity. In this study, a hydrogen and coordination bonding (bi-functional) collector, 2-cyano-N-ethylcarbamoyl acetamide (CEA) was developed, which could form coordination bonds with the Ca²⁺ ions (by carbonyl groups) and hydrogen bonds with the anions (by amino groups) on calcium mineral surfaces. The results of flotation tests showed that CEA can selectively separate fluorite and calcite from scheelite at pH 7. The promising selectivity of CEA lies in both the electrical properties and the anions' hydrogen bonding ability with the three calcium minerals. The negatively charged scheelite surfaces are not conducive to coordination bonding with CEA while the positively charged fluorite and calcite surfaces are. Besides, the hydrogen bonding ability of fluorite (F^-) and calcite (CO₃^2-) with carbamido in CEA is higher than that of scheelite (WO₄^2-), and this also plays an essential role. This coordination and hydrogen bonding based surfactant design protocol has a great potential in the development of tail-made collectors/depressants for the separation of other oxidized minerals.

Single-Atom Catalysts across the Periodic Table

Isolated atoms featuring unique reactivity are at the heart of enzymatic and homogeneous catalysts. In contrast, although the concept has long existed, single-atom heterogeneous catalysts (SACs) have only recently gained prominence. Host materials have similar functions to ligands in homogeneous catalysts, determining the stability, local environment, and electronic properties of isolated atoms and thus providing a platform for tailoring heterogeneous catalysts for targeted applications. Within just a decade, we have witnessed many examples of SACs both disrupting diverse fields of heterogeneous catalysis with their distinctive reactivity and substantially enriching our understanding of molecular processes on surfaces. To date, the term SAC mostly refers to late transition metal-based systems, but numerous examples exist in which isolated atoms of other elements play key catalytic roles. This review provides a compositional encyclopedia of SACs, celebrating the 10th anniversary of the introduction of this term. By defining single-atom catalysis in the broadest sense, we explore the full elemental diversity, joining different areas across the whole periodic table, and discussing historical milestones and recent developments. In particular, we examine the coordination structures and associated properties accessed through distinct single-atom-host combinations and relate them to their main applications in thermo-, electro-, and photocatalysis, revealing trends in element-specific evolution, host design, and uses. Finally, we highlight frontiers in the field, including multimetallic SACs, atom proximity control, and possible applications for multistep and cascade reactions, identifying challenges, and propose directions for future development in this flourishing field.

Higher Magnetic Fields, Finer MOF Structural Information: 17O Solid-State NMR at 35.2 T

The spectroscopic study of oxygen, a vital element in materials, physical, and life sciences, is of tremendous fundamental and practical importance. ¹⁷O solid-state NMR (SSNMR) spectroscopy has evolved into an ideal site-specific characterization tool, furnishing valuable information on the local geometric and bonding environments about chemically distinct and, in some favorable cases, crystallographically inequivalent oxygen sites. However, ¹⁷O is a challenging nucleus to study via SSNMR, as it suffers from low sensitivity and resolution, owing to the quadrupolar interaction and low ¹⁷O natural abundance. Herein, we report a significant advance in ¹⁷O SSNMR spectroscopy. ¹⁷O isotopic enrichment and the use of an ultrahigh 35.2 T magnetic field have unlocked the identification of many inequivalent carboxylate oxygen sites in the as-made and activated phases of the metal-organic framework (MOF) α-Mg₃(HCOO)₆. The subtle ¹⁷O spectral differences between the as-made and activated phases yield detailed information about host-guest interactions, including insight into nonconventional O···H-C hydrogen bonding. Such weak interactions often play key roles in the applications of MOFs, such as gas adsorption and biomedicine, and are usually difficult to study via other characterization routes. The power of performing ¹⁷O SSNMR experiments at an ultrahigh magnetic field of 35.2 T for MOF characterization is further demonstrated by examining activation of the MIL-53(Al) MOF. The sensitivity and resolution enhanced at 35.2 T allows partially and fully activated MIL-53(Al) to be unambiguously distinguished and also permits several oxygen environments in the partially activated phase to be tentatively identified. This demonstration of the very high resolution of ¹⁷O SSNMR recorded at the highest magnetic field accessible to chemists to date illustrates how a broad variety of scientists can now study oxygen-containing materials and obtain previously inaccessible fine structural information.