Water-assisted production of honeycomb-like g-C3N4 with ultralong carrier lifetime and outstanding photocatalytic activity

Bioderived carbon aerogels loaded with g-C3N4 and their high Efficacy removing volatile organic compounds (VOCs)

Indoor air pollution, predominantly caused by volatile organic compounds (VOCs), poses significant health hazards when concentrations surpass critical thresholds. Using waste corn straw as carbon source and urea as nitrogen source, straw derived carbon aerogel (CAGH) loaded with g-C3N4H2O-N2-450-3 h was successfully prepared by hydrothermal and water-assisted calcination. Following water-assisted regulation, g-C3N4H2O-N2-450-3 h on CAGH exhibited a mixed structure comprising honeycomb and two-dimensional filaments, while the growth of g-C3N4H2O-N2-450-3 h was uniformly distributed on carbon aerogel in a line-surface combination fashion. This innovative binding method not only enhanced the loading capacity of g-C3N4 and the mechanical elasticity of aerogel, but also exposed a large number of adsorption sites, resulting in a significant increase in its adsorption capacity for VOCs, exceeding that of commercial activated carbon (AC). In comparison to pure g-C3N4, CAGH exhibited an expanded photo-response range. Under the exposure of visible light, CAGH proved highly effective in eliminating 73.87 % of toluene. In addition, it has demonstrated efficient removal of formaldehyde and acetone VOCs with good cyclic stability. Therefore, this work aims to reduce the emission of pollutants at source and provide an effective and economical strategy for the preparation of clean building materials from renewable materials, with potential applications in the environmental field.

Enhanced detection of 4-nitrophenol in drinking water: ECL sensor utilizing velvet-like graphitic carbon nitride and molecular imprinting

In this work, a molecularly imprinted electrochemiluminescence (ECL) sensor was developed for selective detection of 4-nitrophenol (4-NP) in drinking water for the first time. By synthesizing velvet-like graphitic carbon nitride (V-g-C3N4) via one-step thermal polycondensation and integrating it with a molecularly imprinted polymer (MIP), the ECL sensor was fabricated. The MIP-modified V-g-C3N4 composites (MIP/V-g-C3N4) were synthesized using a sol-gel method with 4-NP as the template molecule. Under optimal conditions, the ECL sensor exhibited a wide detection range (5 × 10-10-1 × 10-5 mol/L) and a low detection limit (1.8 × 10-10 mol/L). In testing with actual drinking water samples, it displayed high accuracy (recoveries for intraday and inter-day: 93.50-106.2% and 97.00-107.3%, separately) and precision (RSDs for intraday and inter-day: 1.54-4.59% and 1.53-4.28%, respectively). The developed MIP-based ECL sensor demonstrated excellent selectivity, stability, and reproducibility, offering a promising and reliable approach for highly sensitive and selective determination of 4-NP in drinking water.

Comparative study of photocatalysis with bulk and nanosheet graphitic carbon nitrides enhanced with silver

The main goal of this research is to investigate the effectiveness of graphitic carbon nitride (g-C3N4, g-CN) in both bulk and nanosheet forms, which have been surface-modified with silver nanoparticles (Ag NPs), as photocatalysts for the degradation of acid orange 7 (AO7), a model dye. The photodegradation of AO7 dye molecules in water was used to test the potential photocatalytic properties of these powder materials under two different lamps with wavelengths of 368 nm (UV light) and 420 nm (VIS light). To produce Ag NPs (Ag content 0.5, 1.5, and 3 wt%) on the g-CN materials, a new synthesis route based on a wet and low-temperature method was proposed, eliminating the need for reducing agents. The photodegradation activity of the samples increased with increasing silver content, with the best photocatalytic performances achieved for bulk g-CN samples and nanosheet silver-modified samples (with the highest content of 3 wt% Ag) under UV light, i.e., more than 75% and 78%, respectively. The VIS-induced photocatalytic activity of both examined series was higher than that of UV. The highest activities of 92% and 98% were achieved for the 1.5% Ag-modified g-CN bulk and nanosheet materials. This research presents an innovative, affordable, and environmentally friendly chemical approach to synthesizing photocatalysts that can be used for degrading organic pollutants in wastewater treatment.

Understanding Structure-Activity Relationship in Pt-loaded g-C3 N4 for Efficient Solar- Photoreforming of Polyethylene Terephthalate Plastic and Hydrogen Production

Coupling the hydrogen evolution reaction with plastic waste photoreforming provides a synergistic path for simultaneous production of green hydrogen and recycling of post-consumer products, two major enablers for establishment of a circular economy. Graphitic carbon nitride (g-C3 N4 ) is a promising photocatalyst due to its suitable optoelectronic and physicochemical properties, and inexpensive fabrication. Herein, a mechanistic investigation of the structure-activity relationship of g-C3 N4 for poly(ethylene terephthalate) (PET) photoreforming is reported by carefully controlling its fabrication from a subset of earth-abundant precursors, such as dicyandiamide, melamine, urea, and thiourea. These findings reveal that melamine-derived g-C3 N4 with 3 wt.% Pt has significantly higher performance than alternative derivations, achieving a maximum hydrogen evolution rate of 7.33 mmolH2  gcat -1  h-1 , and simultaneously photoconverting PET into valuable organic products including formate, glyoxal, and acetate, with excellent stability for over 30 h of continuous production. This is attributed to the higher crystallinity and associated chemical resistance of melamine-derived g-C3 N4 , playing a major role in stabilization of its morphology and surface properties. These new insights on the role of precursors and structural properties in dictating the photoactivity of g-C3 N4 set the foundation for the further development of photocatalytic processes for combined green hydrogen production and plastic waste reforming.

Internal electric fields drive dual S-scheme heterojunctions: Insights into the role of the triple interlaced lattice

The internal electric field induced by the lattice interfaces in a heterojunction can facilitate charge transfer, thereby improving the photocatalytic performance. However, the details of the relationship between the lattice interfaces and the charge transfer mechanism in heterojunctions remain unclear. In this study, a Bi2WO6/Bi2O2CO3/C3N4 heterojunction (BBC) with an interlaced lattice was prepared, and the role of the interlaced lattice in charge transfer was revealed. Compared to pristine Bi2O2CO3, Bi2WO6, and C3N4, BBC exhibited an increased ciprofloxacin degradation rate constant (0.0573 min-1). A series of experiments were performed to reveal the role of the interlaced lattice interface in the enhanced photocatalytic performance. The results show that the driving force provided by the interlaced lattice interface changes the charge transfer mechanism from a dual Ⅱ-scheme to a dual S-scheme. This work provides profound insights into the effects of lattice interfaces in heterojunctions and the design of efficient photocatalysts.

Graphitic carbon nitride (g-C3N4)-assisted materials for the detection and remediation of hazardous gases and VOCs

Graphitic carbon nitride (g-C3N4)-based materials are attracting attention for their unique properties, such as low-cost, chemical stability, facile synthesis, adjustable electronic structure, and optical properties. These facilitate the use of g-C3N4 to design better photocatalytic and sensing materials. Environmental pollution by hazardous gases and volatile organic compounds (VOCs) can be monitored and controlled using eco-friendly g-C3N4- photocatalysts. Firstly, this review introduces the structure, optical and electronic properties of C3N4 and C3N4 assisted materials, followed by various synthesis strategies. In continuation, binary and ternary nanocomposites of C3N4 with metal oxides, sulfides, noble metals, and graphene are elaborated. g-C3N4/metal oxide composites exhibited better charge separation that leads to enhancement in photocatalytic properties. g-C3N4/noble metal composites possess higher photocatalytic activities due to the surface plasmon effects of metals. Ternary composites by the presence of dual heterojunctions improve properties of g-C3N4 for enhanced photocatalytic application. In the later part, we have summarised the application of g-C3N4 and its assisted materials for sensing toxic gases and VOCs and decontaminating NOx and VOCs by photocatalysis. Composites of g-C3N4 with metal and metal oxide give comparatively better results. This review is expected to bring a new sketch for developing g-C3N4-based photocatalysts and sensors with practical applications.

Incorporation of g-C3N4 nanosheets and CuO nanoparticles on polyester fabric for the dip-catalytic reduction of 4 nitrophenol

In the present work, we present the preparation of a new emerged heterogeneous catalyst (PE/g-C3N4/CuO) by in situ deposition of copper oxide nanoparticles (CuO) over the graphitic carbon nitride (g-C3N4) as the active catalyst and polyester (PE) fabric as the inert support. The synthesized sample (PE/g-C3N4/CuO) "dip catalyst" was studied by using various analytical techniques (Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy and dispersive X-ray spectroscopy (SEM/EDX), and transmission electron microscopy (TEM). The nanocomposite is utilized as heterogeneous catalysts for the 4-nitrophenol reduction in the presence of NaBH4, in aqueous solutions. According to experimental results, PE/g-C3N4/CuO with a surface of 6 cm2 (3 cm × 2 cm) demonstrated the catalyst exhibit excellent catalytic activity with 95% reduction efficiency for only 4 min of reaction and an apparent reaction rate constant (Kapp) of 0.8027 min-1. Further evidence that this catalyst based on prepared PE support can be a good contender for long-lasting chemical catalysis comes from the remarkable stability after 10 repetitions reaction cycles without a noticeably loss in catalytic activity. The novelty of this work consists to fabricate of catalyst based of CuO nanoparticles stabilized with g-C3N4 on the surface of an inert substrate PE, which results in an heterogenous dip-catalyst that can be easily introduced and isolated from the reaction solution with good retention of high catalytic performance in the reduction of 4-nitrophenol.

Recent Advances in Graphitic Carbon Nitride Based Electro-Catalysts for CO2 Reduction Reactions

The electrocatalytic carbon dioxide reduction reaction is an effective means of combating the greenhouse effect caused by massive carbon dioxide emissions. Carbon nitride in the graphitic phase (g-C₃N₄) has excellent chemical stability and unique structural properties that allow it to be widely used in energy and materials fields. However, due to its relatively low electrical conductivity, to date, little effort has been made to summarize the application of g-C₃N₄ in the electrocatalytic reduction of CO₂. This review focuses on the synthesis and functionalization of g-C₃N₄ and the recent advances of its application as a catalyst and a catalyst support in the electrocatalytic reduction of CO₂. The modification of g-C₃N₄-based catalysts for enhanced CO₂ reduction is critically reviewed. In addition, opportunities for future research on g-C₃N₄-based catalysts for electrocatalytic CO₂ reduction are discussed.

Visible light antibacterial potential of cement mortar incorporating Cu-ZnO/g-C3N4 nanocomposites

In this work, a hybrid Cu-ZnO/g-C₃N₄ nanocomposite was synthesized and introduced to fabricate photocatalytic cement mortars by internal mixing. The bactericidal properties of the photocatalytic mortars were explored by using E. coli, S. aureus and P. aeruginosa as a bacteria test strain. The results showed that the Cu-ZnO/g-C₃N₄ nanocomposite had an enhanced harvesting of visible light energy and exhibited excellent stability during the photocatalytic process, which favored a long-term usage performance. The sterilizing efficiency of the photocatalytic cement mortars improved with an increasing content of Cu-ZnO/g-C₃N₄ nanocomposites. A possible bactericidal mechanism was proposed based on the active species trapping experiments, verifying that the photogenerated holes (h⁺) and ˙O₂⁻ radicals were the main active species.

A hybrid Cu-ZnO/g-C₃N₄ nanocomposite was synthesized and introduced to fabricate photocatalytic cement mortar whose bactericidal activity was investigated under visible light.

Facilitated Photocatalytic Degradation of Rhodamine B over One-Step Synthesized Honeycomb-Like BiFeO3/g-C3N4 Catalyst

In the present work, a facile one-step methodology was used to synthesize honeycomb-like BiFeO₃/g-C₃N₄ composites, where the well-dispersed BiFeO₃ strongly interacted with the hg-C₃N₄. The 10BiFeO₃/hg-C₃N₄ could completely degrade RhB under visible light illumination within 60 min. The degradation rate constant was remarkably improved and approximately three times and seven times that of pristine hg-C₃N₄ and BiFeO₃, respectively. This is ascribed to the following factors: (1) the unique honeycomb-like morphology facilitates the diffusion of the reactants and effectively improves the utilization of light energy by multiple reflections of light; (2) the charged dye molecules can be tightly bound to the spontaneous polarized BiFeO₃ surface to form the Stern layer; (3) the Z-scheme heterojunction and the ferroelectric synergistically promoted the efficient separation and migration of the photogenerated charges. This method can synchronously tune the micro-nano structure, surface property, and internal field construction for g-C₃N₄-based photocatalysts, exhibiting outstanding potential in environmental purification.

Research Progress on Graphitic Carbon Nitride/Metal Oxide Composites: Synthesis and Photocatalytic Applications

Although graphitic carbon nitride (g-C3N4) has been reported for several decades, it is still an active material at the present time owing to its amazing properties exhibited in many applications, including photocatalysis. With the rapid development of characterization techniques, in-depth exploration has been conducted to reveal and utilize the natural properties of g-C3N4 through modifications. Among these, the assembly of g-C3N4 with metal oxides is an effective strategy which can not only improve electron-hole separation efficiency by forming a polymer-inorganic heterojunction, but also compensate for the redox capabilities of g-C3N4 owing to the varied oxidation states of metal ions, enhancing its photocatalytic performance. Herein, we summarized the research progress on the synthesis of g-C3N4 and its coupling with single- or multiple-metal oxides, and its photocatalytic applications in energy production and environmental protection, including the splitting of water to hydrogen, the reduction of CO2 to valuable fuels, the degradation of organic pollutants and the disinfection of bacteria. At the end, challenges and prospects in the synthesis and photocatalytic application of g-C3N4-based composites are proposed and an outlook is given.

A non-enzymatic photoelectrochemical sensor based on g-C3N4@CNT heterojunction for sensitive detection of antioxidant gallic acid in food

Gallic acid (GA) is found in a wide range of natural plants and is relevant to the health of human beings. Here, a photoelectrochemical sensing platform based on g-C₃N₄@CNT heterojunction has been prepared for the highly sensitive and selective detection of GA. Under the light of xenon lamp, the photocurrent of g-C₃N₄@CNT is 7 times higher than that of g-C₃N₄. And the sensor generates 4 times more photocurrent in the presence of GA than without GA. This sensor has a wide linear range from 10 nM to 10 μM with a limit of detection as low as 2 nM. Also, the abundant amino groups of g-C₃N₄ provide excellent selectivity for the sensor. Furthermore, the sensor can be used for the analysis of GA in black tea samples, which provides a novel and rapid method for the detection of GA in food samples.

Template-based textural modifications of polymeric graphitic carbon nitrides towards waste water treatment

The composite materials based on graphitic carbon nitrides (g-C₃N₄) are remarkably better semiconductors, but the inherent photocatalytic performance in its generic synthesis form is not up to the mark. Eminence efforts have been made to improve its performance and photocatalytic efficiencies. Recently, extensive investigations have been performed to develop their texturally modified and highly porous structures to get around the big flaws of bulk g-C₃N₄. One significant disadvantage is the increase in the polycondensation while preparation at 550 °C results in g-C₃N₄ materials with restricted specific surface area (SSA) (<10 m²/g) and no textured pores. Textural modification has emerged as an efficient and progressive way to improve optical and electronic characteristics. The final texture and shape of CN are influenced by the precursor's interaction with the template. Researchers are interested in developing CN materials with high SSA and changeable textural properties (pore volume and pore size). Based on the literature review it is concluded that the soft templating approach is relatively simple, and straightforward to induce textural changes in the g-CN type materials. This review focused on improving the textural properties of bulk g-C₃N₄ via templating method, and the major advances in the modified g-C₃N₄ materials for the treatment of wastewater. The procedures and mechanisms of numerous approaches with varying morphologies are thoroughly explained.

Efficient Prevention of Aspergillus flavus Spores Spread in Air Using Plasmonic Ag-AgCl/α-Fe2O3 under Visible Light Irradiation

Aspergillus flavus is a kind of widespread fungi that can produce carcinogenic, teratogenic, and mutagenic secondary metabolites known as aflatoxins. Aspergillus flavus mainly spread through the means of fungal spores in air, thus preventing the spores spread is an effective strategy to control aflatoxins contamination from source. Herein, a rapid and efficient control way to prevent the spread of Aspergillus flavus spores in air was demonstrated. Ag-AgCl nanoparticles were combined with tetrahedral α-Fe₂O₃ to form plasmonic composites that presented 93.65 ± 1.53% prevention rate of Aspergillus flavus spores under 50 min visible light irradiation. The efficient activity was attributed to the synergy effect of Ag including intrinsic disinfection, electron sink, and localized surface plasmon resonance effect, which were proven by photoelectric characterization, density functional theory, and finite difference time domain methods. The calculated work functions of α-Fe₂O₃, Ag, and AgCl were 3.71, 4.52, and 5.38 eV, respectively, which could accelerate photoinduced carrier transfer through Ag during photoreaction. Moreover, it was found that the intrinsic disinfection of Ag and hydroxyl radical from photocatalytic reaction were the main factors to the prevention of Aspergillus flavus spores, which resulted in the destruction of spore structure and the leakage of intracellular protein with 62.15 ± 2.63 μg mL^-1. Most important, it was proven that the composites also showed high activity (90.52 ± 1.26%) to prevent Aspergillus flavus spore spread in the storage process of peanuts. These findings not only provided useful information for an efficient and potential strategy to prevent Aspergillus flavus contamination but also could be as a reference in toxic fungi control.

Enhanced Photoelectrocatalytic Activity of TiO2 Nanowire Arrays via Copolymerized G-C3N4 Hybridization

Photoelectrocatalytic (PEC) oxidation is an advanced technology that combines photocatalytic oxidation (PC) and electrolytic oxidation (EC). PEC activity can be greatly enhanced by the PC and EC synergy effect. In this work, novel copolymerized g-C3N4 (denoted as CNx)/TiO2 core-shell nanowire arrays were prepared by chemical vapor deposition. CNx were deposited on the surface of TiO2 nanowire arrays using organic monomer 4,5-dicyanidazole and dicyandiamide as copolymerization precursor. TiO2 nanowire arrays provide a direct and fast electron transfer path, while CNx is a visible light responsive material. After CNx deposition, the light response range of TiO2 is broadened to 600 nm. The deposition of CNx shell effectively improves the PC efficiency and PEC efficiency of TiO2. Under visible light irradiation and 1 V bias potential, the rate constant k of PEC degradation of CNx/TiO2 core-shell nanowire arrays is 0.0069 min−1, which is 72% higher than that of pure TiO2 nanowires. The built-in electric field formed in the interface between TiO2 core and CNx shell would effectively promote photogenerated charge separation and PEC activity.

The Preparation of g-C3N4/CoAl-LDH Nanocomposites and Their Depollution Performances in Cement Mortars under UV-Visible Light

In this study, new organic-inorganic g-C3N4/CoAl-LDH nanocomposites were prepared and introduced to fabricate photocatalytic cement mortars by internal mixing, coating, and spraying. The photocatalytic depollution of both g-C3N4/CoAl-LDH and cement mortars was assessed by NOx degradation reaction under UV-visible light irradiation. The study results suggested that the degradation efficiency of g-C3N4/CoAl-LDH nanocomposites improved with an increase in g-C3N4 content. The g-C3N4/CoAl-LDH1.5 nanocomposite displayed the highest NOx degradation capacity, which was about 1.23 and 3.21 times that of pure g-C3N4 and CoAl-LDH, respectively. The photocatalytic cement mortars which were all fabricated using different approaches could effectively degrade the target pollutants and exhibited significant compatibility between g-C3N4/CoAl-LDH and cementitious substrate. Among them, the coated mortars showed strong resistance to laboratory-simulated wearing and abrasion with a small decrease in degradation rate.

Insight into the role of charge carrier mediation zone for singlet oxygen production over rod-shape graphitic carbon nitride: Batch and continuous-flow reactor

As a new approach of creating the photo-exited electron (e^-) and hole (h⁺) mediation zone for highly selective singlet oxygen (¹O₂) production, the rod-type graphitic carbon nitride (NCN) has been synthesized from the nitric acid-modified melamine followed by the calcination. The NCN exhibited a higher surface area and surface oxygen adsorption ability than bulk graphitic carbon nitride (BCN). The increment of CO and NH_x groups on NCN corresponded to e^- and h⁺ mediation groups, respectively, resulting in higher production of ¹O₂ than BCN. Moreover, those mediation groups on NCN result in higher recombination efficiency and longer e^- decay time. As a result, the optimized NCN-0.5 (derived from 0.5 M of nitric acid-modified melamine) displayed 5.8 times higher kinetic rate constant of atrazine (ATZ) removal under UVA-LED irradiation compared to BCN. This study also evaluated the ATZ degradation pathways and toxicity effect of by-products. In addition, continuous flow experiments using NCN-0.5 showed superior ATZ removal performance with a hybrid concept between a slurry photocatalysis and a continuous stirred tank reactor system using actual effluent obtained from a wastewater treatment plant. Thus, this work provides an insight into the strategy for highly selective ¹O₂ production and the potential for water purification application.

Highly Conjugated Graphitic Carbon Nitride Nanofoam for Photocatalytic Hydrogen Evolution

As a metal-free photocatalyst, graphitic carbon nitride (g-CN) shows great potential for photocatalytic water splitting, although its performance is significantly limited by structural defects due to incomplete polymerization. In the present work, we successfully synthesize highly conjugated g-CN nanofoam through an iodide substitution technique. The product possesses a high polymerization degree, low defect density, and large specific surface area; as a result, it achieves a hydrogen evolution rate of 9.06 mmol h^-1 g^-1 under visible light irradiation, with an apparent quantum efficiency (AQE) of 18.9% at 420 nm. Experimental analysis and theoretical calculations demonstrate that the recombination of photogenerated carriers at C-NH_x defects was effectively depressed in the nanofoam, giving rise to the high photocatalytic activity.

Tetracycline removal via adsorption and metal-free catalysis with 3D macroscopic N-doped porous carbon nanosheets: Non-radical mechanism and degradation pathway

Recently, metal-based carbon materials have been verified to be an effective persulfate activator, but secondary pollution caused by metal leaching is inevitable. Hence, a green metal-free 3D macroscopic N-doped porous carbon nanosheets (NPCN) was synthesized successfully. The obtained NPCN showed high adsorption capacity of tetracycline (TC) and excellent persulfate (PS) activation ability, especially when calcined at 700 °C (NPCN-700). The maximum adsorption capacity of NPCN-700 was 121.51 mg/g by H-bonds interactions. Moreover, the adsorption process followed pseudo-second-order kinetics model and Langmuir adsorption isotherm. The large specific surface area (365.27 mg/g) and hierarchical porous structure of NPCN-700 reduced the mass transfer resistance and increased the adsorption capacity. About 96.39% of TC was removed after adding PS. The effective adsorption of the catalyst greatly shortened the time for the target organic molecules to migrate to the catalyst. Moreover, the NPCN-700 demonstrated high reusability with the TC removal rate of 80.23% after 4 cycles. Quenching experiment and electron paramagnetic resonance (EPR) test confirmed the non-radical mechanism dominated by ¹O₂. More importantly, the C = O groups, defects and Graphitic N acted as active sites to generate ¹O₂. Correspondingly, electrochemical measurement revealed the direct electron transfer pathway of TC degradation. Finally, multiple degradation intermediates were recognized by the LC-MS measurement and three possible degradation pathways were proposed. Overall, the prepared NPCN had excellent application prospects for removal of antibiotics due to its remarkable adsorption and catalytic degradation capabilities.

Self-Supporting g-C3N4 Nanosheets/Ag Nanoparticles Embedded onto Polyester Fabric as “Dip-Catalyst” for Synergic 4-Nitrophenol Hydrogenation

Herein, we report the design of a cost-effective catalyst with excellent recyclability, simple recuperation and facile recovery, and the examination between the reaction cycles via the development of self-supporting g-C3N4 nanosheets/Ag NPs polyester fabric (PES) using a simple, facile and efficient approach. PES fabrics were coated via a sono-coating method with carbon nitride nanosheets (GCNN) along with an in situ setting of Ag nanoparticles on PES coated GCNN surface producing PES-GCNN/Ag0. The elaborated textile-based materials were fully characterized using FTIR, 13C NMR, XRD, TGA, SEM, EDX, etc. Catalytic performance of the designed “Dip-Catalyst” demonstrated that the as-prepared PES-GCCN/Ag0 has effectively catalyzed the hydrogenation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in the presence of NaBH4. The 3 × 3 cm2 PES-GCNN/Ag0 showed the best catalytic activity, displaying an apparent rate constant (Kapp) equal to 0.43 min−1 and more than 10 reusability cycles, suggesting that the prepared catalyst-based PES fabric can be a strong nominee for sustainable chemical catalysis. Moreover, the coated fabrics exhibited appreciable antibacterial capacity against Staphylococcus epidermidis (S. epidermidis) and Escherichia coli (E. coli). The present study opens up new opportunities for the future design of a low cost and large-scale process of functional fabrics.

Photocatalytic Air Purification Using Functional Polymeric Carbon Nitrides

The techniques for the production of the environment have received attention because of the increasing air pollution, which results in a negative impact on the living environment of mankind. Over the decades, burgeoning interest in polymeric carbon nitride (PCN) based photocatalysts for heterogeneous catalysis of air pollutants has been witnessed, which is improved by harvesting visible light, layered/defective structures, functional groups, suitable/adjustable band positions, and existing Lewis basic sites. PCN-based photocatalytic air purification can reduce the negative impacts of the emission of air pollutants and convert the undesirable and harmful materials into value-added or nontoxic, or low-toxic chemicals. However, based on previous reports, the systematic summary and analysis of PCN-based photocatalysts in the catalytic elimination of air pollutants have not been reported. The research progress of functional PCN-based composite materials as photocatalysts for the removal of air pollutants is reviewed here. The working mechanisms of each enhancement modification are elucidated and discussed on structures (nanostructure, molecular structue, and composite) regarding their effects on light-absorption/utilization, reactant adsorption, intermediate/product desorption, charge kinetics, and reactive oxygen species production. Perspectives related to further challenges and directions as well as design strategies of PCN-based photocatalysts in the heterogeneous catalysis of air pollutants are also provided.

SnS Nanosheets for Rapid and Effective Bacteria Sterilization Under Near-infrared Irradiation

Today, the threat of pathogenic bacterial infection worldwide that leads to the increase of mortality rate strongly demands the development of new antibacterial agents that can kill bacteria quickly and effectively. Although there are a lot of antibacterial agents that have been developed so far, few studies on the antibacterial performance of SnS have been investigated at 808 nm laser. Here, we synthesized SnS nanosheets with strong near-infrared absorption performance and excellent antibacterial performance via a simple solvothermal synthesis route. The as-prepared SnS nanosheets showed excellent photothermal conversion efficiency (38.7 %), photodynamic performance, and photostability, and at the same time 99.98 % and 99.7 % sterilization effect against Gram-negative Escherichia coli (E. coli) and Gram-positive Bacillus subtilis (B. subtilis) under near-infrared irradiation (808 nm, 1.5 W/cm² ). This study suggests that SnS nanosheets could be a promising candidate for antibacterial therapy owing to the synergetic effects of photothermal and photodynamic performance.

TiO2/g-C3N4 photocatalyst for the purification of potassium butyl xanthate in mineral processing wastewater

In the present work, TiO₂-graphite-phase-carbon-nitride (TiO₂/g-C₃N₄) was prepared through a hydrothermal method to obtain a new photocatalytic material. This material was characterized by means of scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray energy spectrometer (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), Solid-state UV-Vis diffuse reflectance spectrometry (UV-Vis-DRS) and electron paramagnetic resonance (EPR). The synthesized TiO₂/g-C₃N₄ exhibited homogeneous morphology, in which TiO₂ nanoparticles were uniformly distributed on the g-C₃N₄ nanosheets. Regarding its potential use as photocatalytic material in the treatment of mineral processing wastewater, 18% TiO₂/g-C₃N₄ showed superior photodegradation performance than TiO₂ and g-C₃N₄, to give 97.1% degradation rate under 100 min of simulated light irradiation. The experimental results showed that the successful incorporation of TiO₂ on g-C₃N₄ nanosheets enhanced the spectral response range of TiO₂/g-C₃N₄, and the photocatalytic activity was improved. In view of that, it can be considered that this kind of photocatalytic material has a good prospect in the treatment of mineral processing wastewater, which would have clearly environmental relevance.

Antimicrobial mechanisms of g-C3N4 nanosheets against the oomycetes Phytophthora capsici: Disrupting metabolism and membrane structures and inhibiting vegetative and reproductive growth

To understand the potential of urea-synthesized g-C₃N₄ nanosheets (0.125-1 mg/mL) as antimicrobial agents against oomycetes, an investigation of the interaction mechanism between g-C₃N₄ nanosheets and Phytophthora capsici was conducted. Transcription analysis showed that after being exposed to g-C₃N₄ nanosheets for 1 h, P. capsici triggered a sharp upregulation of antioxidant activities and structural constituents and a downregulation of metabolic pathways, including ATP generation, autophagy disruption, membrane system disorders and other complex adaptive processes. All the life stages of P. capsici, including mycelial growth, sporangium formation, zoospore numbers and zoospore germination were remarkably inhibited and even injured. A mutual mechanism is proposed in this work: ROS stress upon exposure to visible irradiation and, combined with their sharp nanosheet structure, cause perturbations of the cell membrane and induce damage to the ultrastructure of mycelial growth, sporangium and zoospores. Given that the antimicrobial action of g-C₃N₄ nanosheets were derived from the damage throughout the duration of treatment and was not limited to a single target, these complex mechanisms could favor the avoidance of drug resistance and benefit other oomycetes management. More importantly, in addition to restraining P. capsici infection in host plants, g-C₃N₄ nanosheets promoted pepper plant growth. Hence, g-C₃N₄ nanosheets have potential as a new non-metal antimicrobial agent to control oomycotal disease in crops.

Impact of graphitic carbon nitrides synthesized from different precursors on Schottky junction characteristics

Graphitic carbon nitride (g-CN) has gained wide interest in many areas, such as energy and the environmental remediation as a layered polymeric semiconductor that allows the formation of catalytically active Schottky junctions due to its proper electronic band structure. Interestingly, although it is known that the precursors used in the synthesis, can influence the properties of the g-CN, no detailed study on these effects on Schottky junctions could be found in the literature. In this research, the effects of g-CNs synthesized by thermal polycondensation of different precursors on the photocatalytic efficiency of Schottky junctions were investigated. For this purpose, urea, thiourea, melamine, and guanidine hydrochloride were used as different precursors, while the photocatalytic dehydrogenation of formic acid was used as a test reaction. The Schottky junctions were formed by decorating the as-prepared g-CNs with AgPd alloy nanoparticles (NP), which were synthesized by reduction of Ag and Pd salts with NaBH4. The structural, electronic and charge carrier dynamics of all prepared structures have been fully characterized by TEM, XRD, BET, XPS, UV-Vis DRS, PL, and PL life measurements. The results showed that the charge transfer dynamics of g-CNs surface defects are more effective in the photocatalytic performance of Schottky junctions than in structural features such as the size of the metal NPs or the surface area of the catalysts.

Biomedical application of graphitic carbon nitrides: tissue depositionin vivo, induction of reactive oxygen species (ROS) and cell viability in tumor cells

The urgency for new materials in oncology is immediate. In this study we have developed the g-C₃N₄, a graphitic-like structure formed by periodically linked tris-s-triazine units. The g-C₃N₄has been synthesized by a simple and fast thermal process. XRD has shown the formation of the crystalline sheet with a compacted structure. The graphite-like structure and the functional groups have been shown by Raman and FTIR spectroscopy. TEM image and AFM revealed the porous composed of five or six C-N layers stacked. DRS and Photoluminescence analyses confirmed the structure with band gap of 2.87 eV and emission band at 448 nm in different wavelengths excitation conditions. The biological results showed inhibitory effect on cancer cell lines and non-toxic effect in normal cell lines. To the best of our knowledge, this is the first work demonstrating the cytotoxic effects of 2D g-C₃N₄in a cancer cell line, without any external or synergistic influence. The biodistribution/tissue accumulation showed that g-C₃N₄present a tendency to accumulation on the lung in the first 2 h, but after 24 h the profile of the biodistribution change and it is found mainly in the liver. Thus, 2D-g-C₃N₄showed great potential for the treatment of several cancer types.

Neodymium oxide (Nd2O3) coupled tubular g-C3N4, an efficient dual-function catalyst for photocatalytic hydrogen production and NO removal

Graphitic carbon nitride (g-C₃N₄) has emerged as a most promising photocatalyst, non-toxicity and low density, but it is plagued by low activity due to the small specific surface area and poor quantum efficiency. Morphological engineering and coupling with other materials to form hybrids have proven to be effective strategies for enabling high photocatalytic performances. Here, neodymium oxide (Nd₂O₃) coupled tubular g-C₃N₄ composites had been facilely synthesized by a solvent evaporation and high-temperature calcination method to realize efficient photocatalytic activity of hydrogen production and NO removal. A series of characterizations, such as XRD, ESR, in-situ DRIFTS, etc., were used to analyze the physical and chemical properties of the bifunctional photocatalyst, which demonstrated that the composite material had more active sites and a faster electron transfer rate. The optimal sample (1 wt% Nd₂O₃/CN-T) had a H₂ generation rate of 4355.34 μmol·g^-1·h^-1, which was 9.46 times than that of original g-C₃N₄ obtained through heating melamine (CN-M). In addition, the NO removal rate was also 32.32% higher than that of original CN-M. On the basis of the above photocatalytic experimental results and characterizations, a possible mechanism or pathway was proposed and illustrated. This work could provide a feasible strategy to fabricate tubular g-C₃N₄-based composites with rare earth metal oxides (dual-factor regulation) to simultaneously enhance photocatalytic hydrogen production and NO removal efficiently (double application).

A visible-light active p-n heterojunction NiFe-LDH/Co3O4 supported on Ni foam as photoanode for photoelectrocatalytic removal of contaminants

Light and electricity are the most prevalent energy sources in natural environment. Herein, a visible-light active Ni foam@NiFe-LDH/Co₃O₄ composite was successfully prepared by loading 1D Co₃O₄ nanowires on the surface of 2D NiFe-LDH nanosheets to be a p-n heterojunction supported on the 3D Ni foam through hydrothermal method, which can be used as photoanode directly for photoelectrocatalytic (PEC) process to simultaneously remove bisphenol (BPA) and Cr(VI) from water. This unique Ni foam-based photoanode modified by NiFe-LDH/Co₃O₄ heterojunction can fully expose the active sites, enhance visible-light absorption and facilitate the migration and separation of photogenerated carriers, thus obtained a boosted efficiency for simultaneous removal of BPA and Cr(VI) under a low applied voltage. Furthermore, the convenient recyclability and excellent stability of the as-prepared Ni foam@NiFe-LDH/Co₃O₄ also show a great potential in environmental purification.

Synthesis of a luminescent g-C3N4–WO3–Bi2WO6/SrAl2O4:Eu2+,Dy3+ nanocomposite as a double z-scheme sunlight activable photocatalyst

Synthesis of the phosphorescent double z-scheme g-C₃N₄–WO₃–Bi₂WO₆/SrAl₂O₄:Eu²⁺,Dy³⁺ nanocomposite especially suitable for the removal of pollutants under cloudy weather.

Comparison of visible light driven H2O2 and peroxymonosulfate degradation of norfloxacin using Co/g-C3N4

As common advanced oxidation processes, Fenton-like and peroxymonosulfate (PMS) processes have received enormous attention due to their high efficiency in the pollutants degradation. In this study, the Co/g-C₃N₄ photocatalyst was prepared by facial calcination strategy and used to evaluate the behavior of the Co/g-C₃N₄/H₂O₂ and Co/g-C₃N₄/PMS systems for norfloxacin (NOR) photocatalytic degradation under visible light irradiation. The composite photocatalysts exhibited better performance compared to that of pure g-C₃N₄ due to the efficient separation of electron-hole pairs and visible light absorption. The Co/g-C₃N₄/PMS system possessed better photocatalytic performance than the Co/g-C₃N₄/H₂O₂ system, where the degradation ratio of NOR and removal ratio of total organic carbon (TOC) were 96.4% and 54%, respectively, in 10 min. The photocatalytic mechanism was investigated using reactive species trapping experiments and electron spin-resonance spectroscopy (ESR). ⋅OH and SO₄^⋅- were the dominant reaction species in the Co/g-C₃N₄/H₂O₂ and Co/g-C₃N₄/PMS systems, respectively. According to the analysis of the NOR degradation path, SO₄^⋅- could attack the C-H bond on the piperazine ring or quinolone group of NOR, which resulted in it more active and accelerating the destruction of NOR with SO₄^⋅- and ⋅OH. The destruction of the quinolone group was the main pathway in the H₂O₂ process, while the destruction of the piperazine ring was the main pathway in the PMS process. In sum, the Co/g-C₃N₄/PMS process had a higher photocatalytic activity and economic applicability.

Antibacterial Performance of a Gold-Loaded g-C3 N4 Nanocomposite System in Visible Light-Dark Dual Mode

Semiconductor photocatalysis technology, which can kill pathogenic microorganisms in a green and broad-spectrum way, is a new research field with great application potential. Due to the dependence on light, semiconductor materials have the problems of low utilization rate of sunlight and inactivation under dark conditions. A simple Au-loaded g-C₃ N₄ (Au/g-C₃ N₄ ) nanocomposites was studied. Under dark conditions, the antibacterial efficiency of 1.2 % Au/g-C₃ N₄ reached 99.1 % relative to 10⁵  CFU (Colony-FormingUnits)/mL E. coli. Under light conditions, the antibacterial efficiency of 0.9 % Au/g-C₃ N₄ reached 94.1 % relative to 10⁷  CFU/mL E. coli. The influence of contact time, Au loading and bacterial concentration on its antibacterial performance under dark conditions was discussed in detail. Through photoelectrochemistry, SEM, TEM and reactive oxygen species (ROS) detection the microscopic charge behaviour was revealed in the system, and a light-dark dual-mode antibacterial mechanism was proposed.

One-step synthesis of high photocatalytic graphitic carbon nitride porous nanosheets

As a metal-free photocatalyst, graphitic carbon nitride (g-C₃N₄) has attracted tremendous attention. Preparation of porous few-layer g-C₃N₄ nanosheets has been proven to be an effective strategy to obtain high photocatalytic performance. At present, most methods are expensive, time-consuming or complicated. Here, a low-cost, facile and environment-friendly one-step synthesis method of porous few-layer g-C₃N₄ nanosheets is designed by introducing water in the precursor. Straightforward calcination of the precursor, which decomposes to form ammonia, can produce g-C₃N₄ nanosheets with the assistance of water. Under the visible light (>400 nm), the photocatalytic H₂ evolution performance of the so-obtained nanosheets is 3214 μmol · g^-1 · h^-1, which is 17.3 times of the original bulk g-C₃N₄. The apparent quantum yield is 27% under the 380 nm monochromatic light irradiation.

Rapid visible-light degradation of EE2 and its estrogenicity in hospital wastewater by crystalline promoted g-C3N4

Metal-free, chemically activated crystalline graphitic carbon nitride (g-C₃N₄) nanorods with enhanced visible-light photoactivity demonstrated rapid photodegradation of 17α-ethinylestradiol (EE2) in water and real hospital wastewater. Pure g-C₃N₄ and another three crystalline promoted g-C₃N₄ photocatalysts developed by hydrothermal method were characterized by, High-Resolution Transmission Electron Microscopy (HRTEM), X-ray diffraction (XRD), Fourier-Transform Infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), Photoluminescence (PL), Electron spin resonance (ESR), X-ray Photoelectron Spectroscopy (XPS) and Diffuse Reflectance Spectroscopy (DRS). Hydrothermal-based chemical activation did not alter the crystal structure, functional group or surface morphology, but it enhanced the specific surface area of activated g-C₃N₄ due to intralayer delamination and depolymerization of g-C₃N₄. Compared to pure g-C₃N₄, the activated g-C₃N₄-3 demonstrated efficient degradation of EE2 (<30 min, 3 mg/l) by visible wavelengths of the solar spectrum. This work provides advanced insight into the construction of heterojunction visible-light photocatalysts and production of O₂^- via reduction of O₂ with photogenerated electrons. Proposed and derived mechanism for photodegradation of EE2 by g-C₃N₄-3 using gas chromatography-mass spectrometry (GCMS). Yeast Estrogen Screen (YES) was performed to evaluate the estrogenicity of treated water samples. Efficient removal of EE2 estrogenic activity (<45 min, 3 mg/l) was achieved using the visible light-activated g-C₃N₄. Estrogenicity removal rate corresponded well with EE2-degradation rate.

Photocatalytic reduction of U(VI) in wastewater by mGO/g-C3N4 nanocomposite under visible LED light irradiation

Efficient elimination of U(VI) from uranium wastewater is an urgent task for sustainable nuclear energy and environmental protection. In this study, magnetic graphene oxide decorated graphitic carbon nitride (mGO/g-C₃N₄) nanocomposite was prepared and used for photocatalytic reduction of U(VI) in wastewater under visible LED light irradiation for the first time. The batch experiments indicated that the mGO/g-C₃N₄ (mGCN) nanocomposite could efficiently reduce U(VI) under visible LED light, and a high U(VI) extraction capacity of 2880.6 mg/g was obtained with an extraction efficiency of 96.02%. The transmission electron microscopy (TEM) elemental mapping, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) analyses demonstrated that the soluble U(VI) was immobilized by transforming it to metastudtite ((UO₂)O₂·2H₂O) by mGCN nanocomposite under visible LED light irradiation. This work indicated that the mGCN is a promising visible light catalyst for treatment of uranium wastewater.

Tale of Two Layered Semiconductor Catalysts toward Artificial Photosynthesis

The ever-increasing reliance on nonrenewable fossil fuels due to massive urbanization and industrialization created problems such as depletion of the primary feedstock and raised the atmospheric CO₂ levels causing global warming. A smart and promising approach is artificial photosynthesis that photocatalytically valorizes CO₂ into high-value chemicals. The inexpensive layered semiconductors like g-C₃N₄ and rGO or GO have the potential to make the process practically feasible for real applications. The suitable band positions with respect to the reduction potentials coupled with the typical surface properties of these layered semiconductors play a beneficial role in photoreduction of CO₂. Additionally, the creation of heterojunction interfaces to achieve the Z-scheme by anchoring g-C₃N₄ and rGO with another semiconductor with proper band alignment and dispersing plasmonic nano metals to obtain Schottky barriers on the layered surfaces also help retarding the electron-hole recombination and boost up the catalytic efficacy. Extensive exploration happened in recent years toward artificial photosynthesis over these materials, which needs a critical compendium. Surprisingly, in spite of the recent explosion of studies on photocatalytic reduction of CO₂ over metal-free semiconductors, there is not a single review on comparing the mechanistic aspects of photoreduction of CO₂ over the layered semiconductors g-C₃N₄ and rGO. This review stands out as a unique documentation, where the mechanism of photocatalytic reduction of CO₂ over this set of materials is critically examined in the context of band and surface modifications. An overall conclusion and outlook at the end indicates the need to develop prototypes for artificial photosynthesis with these well-studied semiconducting layered materials to yield solar fuels.

Fe and Cu co-doped graphitic carbon nitride as an eco-friendly photo-assisted catalyst for aniline degradation

A novel bimetallic coordinated g-C₃N₄ with Fe₂O₃ composite catalyst (FeCu-g-C₃N₄) was synthesized by simple calcination of Fe³⁺/Cu²⁺/melamine precursor. Its catalytic performance was analyzed via photodegrading aniline. The X-ray diffraction (XRD), field emission scanning electronic microscopy (FESEM), Fourier transform infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS) were employed to characterize the composition and structure of the catalysts. Results indicated that Fe mainly distributed in the Fe(III)-N coordination form and partly in Fe₂O₃ lattice, and Cu inserted at the interstitial positions of g-C₃N₄ in the Cu(I)-N form. The great optical property was also proved by ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS), photoluminescence (PL) spectroscopy, and photocurrent responses. The heterogeneous photo-assisted catalyst exhibited excellent performance in activation of H₂O₂, resulting in 80% decomposition of aniline with low metal leaching in 6 h. The incorporation of Cu elevated the performance of degradation compared to that only iron doped. A synergistic catalytic effect between solid Cu(I) and Fe(III) accelerated the reduction of Fe(III). The ·OH and ¹O₂ were confirmed as major reactive oxygen species (ROS) identified by scavenging experiments and ESR, and e^- was the most essential since it not only led to the generation of ROS but also participated in the circulation of Fe³⁺/Fe²⁺, Cu²⁺/Cu⁺, and Fe³⁺/Cu⁺. Furthermore, the possible catalytic mechanism was proposed based on the analysis.

A Fluorescent g-C3N4 Nanosensor for Detection of Dichromate Ions

Background:

Dichromate (Cr2O7 2-) ion is one of the carcinogenic and toxic spices in environment which can easily contaminate the environment due to its high solubility in water. Therefore, a lot of attention has been focused on the detection of Cr2O7 2- with high sensitivity and selectivity.

Methods:

In present work, nitrogen-rich precursor was used for synthesizing graphitic carbon nitride (g-C3N4) nanostructures through hydrothermal oxidation of g-C3N4 nanosheets. The prepared nanostructures show two distinct fluorescence emissions centered at 368 and 450 nm which are highly sensitive toward Cr2O7 2- ions.

Results:

The as-prepared g-C3N4 was characterized by several techniques such as Fourier-Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and fluorescence emission spectra. The XRD pattern of prepared nanostructures illustrated two diffraction patterns (at 13.4° and 27.6°) indicating tri-s-tri-azine-based structures. The g-C3N4 exhibited good selectivity and sensitivity toward Cr2O7 2- among other anions. According to titration test, the detection limit and stern-volmer constant (Ksv) were calculated as 40 nM and 0.13×106 M-1, respectively. The investigation of quenching mechanism shows that Cr2O7 2- may form hydrogen bonding with surface groups of g-C3N4 (such as NH2, OH and COOH) resulted in more fluorescence quenching in comparison with the pure inner filter effect.

Conclusion:

The g-C3N4 nanostructures were successfully synthesized through the hydrothermal oxidation. The as-prepared g-C3N4 can be used as a highly sensitive fluorescent probe for the selective determination of Cr2O7 2 ion among other anions. The quenching mechanism was experimentally studied. According to reliable responses in real sample tests, it can be proposed that g-C3N4 nanostructure is a suitable sensitive nanosensor for detection of Cr2O7 2 ions in aqueous media.