Constructing extrinsic oxygen vacancy on the surface of photocatalyst as CO2 and electrons reservoirs to improve photocatalytic CO2 reduction activity

Constructing own oxygen vacancies in the photocatalysts is a very promising method to improve their photocatalytic CO2 reduction activity. However, some catalysts have excellent stabilities, making it difficult for them to construct their own oxygen vacancies. To simplify the above difficulty of stable photocatalysts, constructing extrinsic oxygen vacancies on their surface as a novel idea is proposed. Here, a stable TiO2 nanosheet is chosen as a research object, we uniformly deposited BiOCl quantum dots on their surface via a simple adsorption-deposition method. It is found that BiOCl quantum dots are able to simultaneously self-transform into defective BiOCl with many oxygen vacancies when the photocatalyst is performed photocatalytic CO2 reduction. These extrinsic oxygen vacancies can act as "CO2 and photo-generated electrons reservoirs" to improve CO2 capture and accelerate the separation of photogenerated electrons and holes. For the above reasons, the modified TiO2 showed obvious enhancement of photocatalytic CO2 reduction compared to pristine TiO2 and BiOCl. This work may open a new avenue to broaden the use of oxygen vacancies in the process of photocatalytic CO2 reduction.

Construction synergetic adsorption and activation surface via confined Cu/Cu2O and Ag nanoparticles on TiO2 for effective conversion of CO2 to CH4

High-performance photocatalysts for catalytic reduction of CO2 are largely impeded by inefficient charge separation and surface activity. Reasonable design and efficient collaboration of multiple active sites are important for attaining high reactivity and product selectivity. Herein, Cu-Cu2O and Ag nanoparticles are confined as dual sites for assisting CO2 photoreduction to CH4 on TiO2. The introduction of Cu-Cu2O leads to an all-solid-state Z-scheme heterostructure on the TiO2 surface, which achieves efficient electron transfer to Cu2O and adsorption and activation of CO2. The confined nanometallic Ag further enhances the carrier's separation efficiency, promoting the conversion of activated CO2 molecules to •COOH and further conversion to CH4. Particularly, this strategy is highlighted on the TiO2 system for a photocatalytic reduction reaction of CO2 and H2O with a CH4 generation rate of 62.5 μmol∙g-1∙h-1 and an impressive selectivity of 97.49 %. This work provides new insights into developing robust catalysts through the artful design of synergistic catalytic sites for efficient photocatalytic CO2 conversion.

Coupling ultrafine TiO2 within pyridinic-N enriched porous carbon towards high-rate and long-life sodium ion capacitors

Coupling TiO2 within N-doped porous carbon (NPC) is essential for enhancing its Na+ storage performance. However, the role of different N configurations in NPC in improving the electrochemical performance of TiO2 is currently unknown. In this study, melamine is deliberately incorporated as a pore-forming agent in the self-assembly process of metal organic framework precursors (NH2-MIL-125(Ti)). This intentional inclusion of melamine leads to the one-pot and in-situ formation of highly active edge-N, which is vital for the development of TiO2/NPC with exceptional reactivity. Electrochemical performance characterization and density functional theory (DFT) calculation indicate that the interaction between TiO2 and pyridinic-N enriched NPC can effectively narrow the bandgap of TiO2/NPC, thereby significantly improving electron/ion transfer. Additionally, the abundant mesoporous channels, high N content and oxygen vacancies also contribute to the fast reaction kinetics of TiO2/NPC. As a result, the optimized TiO2/NPC-M, with high proportion of pyridinic-N (44.1 %) and abundant mesoporous channels (97.8 %), delivers high specific capacity of 282.1 mA h-1 at 0.05 A g-1, superior rate capability of 177.3 mA h-1 at 10 A g-1, and prominent capacity retention of 89.3 % over 5000 cycles even under ultrahigh 10 A g-1. Furthermore, the TiO2/NPC-M//AC sodium ion capacitors (SIC) device achieves a high energy density of 136.7 Wh kg-1 at 200 W kg-1. This research not only offers fresh perspectives on the production of high-performance TiO2-based anodes, but also paves the way for customizing other active materials for energy storage and beyond.

Enhanced photocatalytic ammonia oxidation activity and nitrogen selectivity over Ag/AgCl/N-TiO2 photocatalyst

The removal of ammonia (NH3) emitted from agricultural and industrial activities is of great significance to protect human health and ecological environment. Photocatalytic NH3 oxidation to N2 under mild conditions is a promising strategy. However, developing visible light photocatalysts for NH3 oxidation is still in its infancy. Here, we fabricate N-TiO2 and Ag/AgCl/N-TiO2 photocatalysts by sol-gel and photodeposition methods, respectively. The introduction of N not only endows TiO2 with visible light response (absorption edge at 460 nm) but also results in the formation of heterophase junction (anatase and rutile). Thus, N-TiO2 shows 2.0 and 1.8 times higher than those over anatase TiO2 and commercial TiO2 for NH3 oxidation under full spectrum irradiation. Meanwhile, surface modification of Ag can simultaneously enhance visible light absorption (generating localized surface plasmon resonance effect) and charge separation efficiency. Therefore, the photocatalytic activity of Ag/AgCl/N-TiO2 is further improved. Furthermore, the presence of N and Ag also enhances the selectivity of N2 product owing to the change of reaction pathway. This work simultaneously regulates photocatalytic conversion efficiency and product selectivity, providing some guidance for developing highly efficient photocatalysts for NH3 elimination.

UV/TiO2 photocatalysis as post-treatment of anaerobic membrane bioreactor effluent for reuse

Advanced oxidation processes have been widely applied as a post-treatment solution to remove residual organic compounds in water reuse schemes. However, UV/TiO2 photocatalysis, which provides a sustainable option with no continuous chemical addition, has very rarely been studied to treat anaerobically treated effluents. In the current study, the removal of organics and nutrients from an anaerobic membrane bioreactor (AnMBR) effluent is evaluated during adsorption and photocatalysis processes under various conditions of TiO2 dose and UV intensity and compared to the effluent from an aerobic membrane bioreactor (AeMBR). The sequence for preferential adsorption on TiO2 was found to be phosphorus, inorganic carbon and then ammonia/organic carbon were found. The competing effect between the organics and nutrients, along with the low UV transmission efficiency caused by the need for high doses of TiO2, ultimately compromise the organic removal efficiency in the AnMBR permeate. TiO2 dosage was found to have a greater impact than UV intensity on improving the overall removal performance as nutrients are competing for the adsorption site but are not photodegraded. Under the same operational condition, the UV/TiO2 photocatalysis displayed a higher removal efficiency of organic matter and phosphorus in the AeMBR effluent due to a lower initial organics concentration and absence of ammonia as compared to the AnMBR effluent.

A sustainable activated carbon fiber/TiO2 cathode for the photoelectro-Fenton treatment of pharmaceutical pollutant enalapril

In this work, a TiO2-decorated electrode was fabricated by dip coating activated carbon fibers (ACF) with TiO2, which were then used as a cathode for the photoelectro-Fenton (PEF) treatment of the pharmaceutical enalapril, an angiotensin-converting enzyme inhibitor that has been detected in several waterways. The TiO2 coating was found to principally improve the electrocatalytic properties of ACF for H2O2 production via the 2-e- O2 reduction, in turn increasing enalapril degradation by PEF. The effect of the current density on the mineralization of enalapril was evaluated and the highest TOC removal yield (80.5% in 3 h) was obtained at 8.33 mA cm-2, in the presence of 0.5 mmol L-1 of Fe2+ catalyst. Under those conditions, enalapril was totally removed within the first 10 min of treatment with a rate constant k = 0.472 min-1. In contrast, uncoated ACF only achieved 60% of TOC removal in 3 h at 8.33 mA cm-2. A degradation pathway for enalapril mineralization is proposed, based on the degradation by-products identified during treatment. Overall, the results demonstrate the promises of TiO2 cathodes for PEF, a strategy that has often been overlooked in favor of photoelectrocatalysis (PEC) based on TiO2-modified photoanodes.

Combination of ensemble machine learning models in photocatalytic studies using nano TiO2 - Lignin based biochar

Synergizing photocatalytic reactions with machine learning methods can effectively optimize and automate the remediation of pollutants. In this work, commercial Degussa TiO2 nanoparticles and lignin based biochar (LB) where used to prepare TiO2: lignin based biochar (TLB) composites using ultrasound-assisted co-precipitation method. The photocatalytic property of the TLB composites where studied by conducting the photocatalytic degradation of a Basic blue 41 (BB41) dye. The influence of calcination temperature, T:LB compositions, catalyst dosage, initial dye pH, initial dye concentration, and illumination time on photocatalytic dye degradation were experimentally studied. The degradation efficiency of 96.72 % was obtained under optimized conditions for the photocatalyst calcined at 500 °C containing a 1:1 wt percentage of TiO2 and LB. The experimental data was further used to predict the photocatalytic degradation efficiency using Gradient Tree Boosting (GTB) and Extra Trees (ET) models. The GTB model gave the highest prediction accuracy of 94 %. The permutation variable importance revealed catalyst dosage and dye concentration as the most influential parameters in the prediction of the photocatalytic dye degradation efficiency.

Study on preparation of UV-CDs/Zeolite-4A/TiO2 composite photocatalyst coupled with ultraviolet-irradiation and their application of photocatalytic degradation of dyes

In this work, ultraviolet irradiation was employed to assist in the preparation of a novel photocatalyst composite in the form of carbon dots/zeolite-4A/TiO2, using coal tailings as the source of silicon-aluminum and carbon. The composite was designed for the degradation of methylene blue under 500 W of UV light irradiation. Zeolite-4A was used as a support for the well-dispersed carbon dots and TiO2 nanoparticles. The as-prepared composites were subjected to thorough characterization, confirming the successful formation of zeolite-4A with a cube structure, along with the loading of TiO2 and coal-based CDs in the composites. The experimental results demonstrated that the UV-CZTs nanocomposites exhibited a remarkable removal efficiency of 90.63% within 90 min for MB. The corresponding rate constant was exceptionally high at 0.0331 min-1, surpassing that of the Dark-CZTs and pure TiO2. This significant enhancement was possibly due to the synergistic effect of adsorption photocatalysis of the UV-CZTs, combined with the excellent electron-accepting capabilities of the coal-based CDs, which led to highly improved charge separation. An investigation of the spent photocatalyst's recyclability revealed that it retained a remarkable 82.94% MB removal efficiency after five consecutive cycles, signifying the stability of the composite. Trapping experiments also elucidated the primary reactive species responsible for MB degradation, which were identified as photo-generated holes and ⸱O2- species. By this process, the hydroxyl radicals generated in the system successfully promoted the transformation of coal tailings to coal-based zeolite and coal-based CDs. Coal-based zeolite served as an excellent carrier of titanium dioxide, which improved its dispersibility. The inhibition of e--h+ recombination of titanium dioxide by introducing coal-based CDs improved the photocatalytic ability of titanium dioxide. Through this study, coal tailings, as a coal processing waste, were transformed into high-value materials, and relevant photocatalytic composite materials could be prepared with broad application prospects.

N-doped TiO2/Ti3C2-driven self-photocatalytic molecularly imprinted ECL sensor for sensitive and steady detection of dexamethasone

The conventional luminol-based electrochemiluminescence (ECL) biosensor suffers from hampered signal stability due to the self-decomposition of the H2O2 co-reactant. Here, we propose an N-doped TiO2/Ti3C2 heterojunction driven self-photocatalytic platform for ECL signal amplification and then combine it with molecular imprinting technology for sensitive and steady detection of dexamethasone (DXM). Unlike traditional cases involving specific catalysts or external electron injection, the initial luminescence of luminol in this new system is utilized as the excitation light of N-doped TiO2/Ti3C2 photocatalyst to promote the conversation of dissolved oxygen to H2O2, supplying more co-reactants to improve ECL of luminol in turn. Thanks to the heterojunction and self-photocatalytic cyclic amplification, this molecularly imprinted ECL sensor exhibits a wide linear range (1.0 × 10-6-1.0 × 101 μg mL-1) and a low detection limit, as well as excellent anti-interference capability, sensitivity, and stability. This work contributes to more reliable and steady detection of DXM and brings new insights into developing exogenous co-reactant-free self-enhancement ECL models for biosensor applications.

Vivid-Colored Electrorheological fluids with simultaneous enhancements in color clarity and Electro-Responsivity

HYPOTHESIS

Surface modification of dielectric materials changes the dipole-dipole interactions under electric fields, thereby controlling the electrorheological (ER) response. The introduction of metal oxides onto mica templates and further coating of dyes is expected to simultaneously improve the color clarity and ER performance.

EXPERIMENTS

Dye-coated TiO2 platelets on mica are synthesized for high-performance colorful ER fluids. A sol-gel method is utilized to grow TiO2 on mica to prepare precursor light-colored mica/TiO2 materials, which are coated with appropriate dyes to enhance the vividness as determined by the Commission Internationale de clairage L*a*b* color system. The color expression and color clarity improvement are explained via the light interference effect and the presence of chromophores.

FINDINGS

The uniform TiO2 layers can be obtained under low pH conditions with controlled nucleation kinetics. The addition of dyes to TiO2 increases the surface area and porosity of ER materials and introduces heteroatoms that act as positive factors. In practical ER applications, dye-coated TiO2-based ER fluids exhibit higher ER performances compared with the corresponding light-colored TiO2-based ER fluids. The vivid-colored ER fluids could provide an easy selection for a wide range of rheological systems requiring a specific magnitude of stress by confirming the color.

TiO2 nanorods decorated Si nanowire hierarchical structures for UV light activated photocatalytic application

Water remediation techniques like photolysis have recently piqued the interest of many researchers due to water contamination resulting from heavy industrialization and urbanization. In the current work, as-synthesized TiO2 nanorod decorated vertically aligned silicon nanowire (SiNW) leads to a hierarchical morphological structure formation. The photocatalytic nature of the fabricated SiNW/TiO2 nanoheterojunction is examined by the dye degradation of textile pollutants like methylene blue (MB), rhodamine B (RhB), and eosin B (EB). The catalytic dye degradation investigations revealed that 4 h hydrothermal synthesis of TiO2 on the surface of SiNW (ST4) exhibited excellent catalytic behaviour. In the presence of H2O2 and UV irradiation, the ST4 nanoheterostructure can degrade 98.89% of the model pollutant methylene blue (MB) in 15 min, demonstrating remarkable photocatalytic performance. The direct Z-scheme heterojunction exhibited by the SiNW/TiO2 structure facilitates a more efficient charge transfer mechanism with higher reducing and oxidizing ability leading to enhanced photocatalytic behaviour. The degradation pathway examined by LC-MS studies demonstrated the complete breakdown of the organic MB dye molecules ultimately mineralizing into CO2, H2O, and other inorganic substances. The photocatalyst ST4 exhibited excellent reusability and stability after multiple cycles of dye degradation enabling its use in practical water purification purposes.

"Floating Catalytic Foam" with prominent heat-induced convection for the effective photocatalytic removal of antibiotics

Immobilized photocatalysts represent a promising candidate for the wastewater treatments due to their good reusability, high stability and low eco-risk. Mass transfer within the immobilized catalytic bed is a crucial process that determines the contacting, adsorption, and degradation kinetics in the photodegradation. In this study, a floating catalytic foam (FCF) with a prominent pumping effect was designed to promote mass transfer. The polyurethane foam immobilized with rGO/TiO2/ultrathin-g-C3N4 photocatalyst (PRTCN) was prepared by a simple dip-coating and Uv-light aging process. It was found that the hydrophilic-hydrophobic interfaces could not only contribute to the floating of the catalyst but also establish a temperature gradient across the floating immobilized catalyst. In addition, the temperature gradient induced convection could serve as a built-in pump to effectively promote the diffusion and adsorption of target antibiotic molecules during the photocatalytic process. Therefore, the PRTCN demonstrated a high photodegradation and mineralization efficiency with excellent reusability and anti-interference capability. Moreover, the photodegradation mechanism and the intermediates' toxicity of norfloxacin were detailly investigated by ultra-high resolution electrospray time-of-flight mass spectrometry, density functional theory simulation and ECOSAR estimation. This work proposed a facile and sustainable strategy to enhance the mass transfer problem on immobilized photocatalysts, which could promote the application of the immobilized photocatalysts in the real water-treatment scenarios.

Preparation of uniform lignin/titanium dioxide nanoparticles by confined assembly: A multifunctional nanofiller for a waterborne polyurethane wood coating

We report a facile synthesis for lignin/titanium dioxide (TiO2) nanoparticles (LT NPs) at room temperature by confining assembly of lignin macromolecules. The LT NPs had a uniform nanosize distribution (average diameter ∼ 68 nm) and were directly employed as multifunctional nanofillers to reinforce a waterborne polyurethane wood coating (WBC). X-ray diffraction, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy revealed the mechanism by which formed TiO2 confined lignin assembly. The LT NPs considerably increased the tensile strength of a WBC film from 16.3 MPa to 28.1 MPa. The WBC-LT NPs exhibited excellent ultraviolet (UV) A and UVB blocking performances of 87 % and 98 %, respectively, while maintaining 94 % transmittance in the visible region. Incorporating LT NPs into the WBC enhanced the coating performance (the hardness, adhesion, and abrasion resistance) on wood substrates. A quantitative color and texture analysis revealed that the LT NPs increased the decorativeness of actual wooden products. After nearly 1800 h of UV irradiation, wood coated with the WBC-LT NPs exhibited good color stability, where the original color remained unchanged or even became brighter. In this study, value-added valorization of lignin is enabled by using organic-inorganic nanofillers and insights are gained into developing multifunctional WBCs.

Design and fabrication of self-suspending aluminum-plastic/semiconductor photocatalyst devices for solar energy conversion

The design and synthesis of self-suspending photocatalyst device with easy recyclability is important for practical application. Here, this work utilizes aluminum-plastic package waste as raw material to prepare an aluminum-plastic supported TiO2 (AP-TiO2) photocatalyst device through 3D printing design and surface deposition method. A series of characterizations were carried out to explore the structure, morphology and performance of the AP-TiO2 device. Under UV light illumination, the AP-TiO2-50 efficiently degrade 93.6% tetracycline hydrochloride (THC) after 4 hr, which increases by 8.3% compared with that of TiO2 powder suspension system with the same catalyst amount. Based on it, AP-ZnO, AP-CdS, AP-g-C3N4 and AP-Pt-TiO2 are also fabricated, and applied in photocatalytic degradation and hydrogen evolution, which all exhibit higher photoactivities than powder suspension systems. This work provides a new avenue for the fabrication of advanced recyclable photocatalyst device. Moreover, the work offers a novel sight for the high-value utilization of aluminum-plastic package waste, which has positive implications for environmental protection.

Exposure concentration ratios and biological responses play a critical role in determining the joint toxicity of TiO2 nanoparticles and As(V) to the organism: The case study in marine algae Phaeodactylum tricornutum

Environmental risks of manufactured nanomaterials (MNMs) have been widely investigated while the understanding for joint toxicity mechanism of MNMs with other contaminants is still limited. This limitation may be attributed to variations in the concentration ratios of MNMs and co-existing contaminants in the real environment. To better assess the joint toxicity and clarify its underlying mechanisms, this study exposed Phaeodactylum tricornutum to different concentration combinations of nano-sized titanium dioxide (nTiO2) and As(V) at toxic unit (TU) ratios of 1:4,1:1, and 4:1. The results demonstrated that the joint toxicity modes of nTiO2 and As(V) varied with the TU ratios exhibiting synergism for 1:4, partially addition for 1:1, and antagonism for 4:1. Specifically, at low TU ratio of 1:4, the adsorption of As(V) by nTiO2 together with the subsequent internalization of nTiO2 promoted a significant enrichment of As in algae. Simultaneously, the up-regulation of pst (phosphate transporter) genes in charge of the As(V) transport molecular further exacerbated the enrichment of inorganic As in algae, while the down-regulation of ArsM (arsenite S-adenosylmethionine methyltransferases) genes in charge of the As metabolism inhibited As biotransformation from toxic inorganic to nontoxic organic, causing the aggravated accumulation of toxic inorganic As in algae. At higher TU ratios of 1:1 and 4:1, the accumulation of As decreased in algae due to the higher sedimentation of nTiO2 and thus the lower internalization of As-adsorbed nTiO2, as well as the down-regulation of pst genes restricting the transportation of As(V) into algal cells, which jointly accelerated the As biotransformation from toxic inorganic to nontoxic organic. Our results suggest that more attention should be paid to exposure concentration ratios of MNMs and co-existing contaminants and biological responses including bioavailability, bioaccumulation, biotransformation, which would play a critical role in determining the joint toxicity to the organism.

CuFeS2 supported on dendritic mesoporous silica-titania for persulfate-assisted degradation of sulfamethoxazole under visible light

Sulfamethoxazole (SMX) is a prevalent sulfonamide antibiotic found in the environment, and it has a variety of detrimental effects on environmental sustainability and water safety. Recently, the combination of photocatalysis and sulfate radical-based advanced oxidation processes (SR-AOPs) has attracted a lot of interest as a viable technique for degradation of refractory pollutants. In this study, a visible light active CuFeS2 supported on dendritic mesoporous silica-titania (CuFeS2-DMST) photocatalyst was synthesized to improve the ability of TiO2 to activate persulfate (PS) by introducing CuFeS2 (Fe2+/Fe3+, Cu+/Cu2+ redox cycles). The CuFeS2-DMST/PS/Vis system demonstrated superior SMX degradation efficiency (88.9%, 0.0146 min-1) than TiO2 because of reduced e-/h+ recombination, excellent charge separation and mobility, and a greater surface area than TiO2. Furthermore, after four consecutive photocatalytic cycles, the system demonstrated moderate stability. From chemical quenching tests, O2●-, h+, 1O2, SO4●- and ●OH were found to be the main reactive oxidizing species. The formed intermediates during the degradation process were identified, and degradation mechanisms were proposed. This study proposes a viable technique for activating PS using a low-cost, stable, and high-surface-area TiO2-based photocatalyst, and this concept can be applied to design photocatalysts for water treatment.

Sterilization mechanism and nanotoxicity of visible light-driven defective carbon nitride and UV-excited TiO2

The sterilization effect of photocatalysis and biotoxicity of nanomaterial catalysts have attracted high attention. In this study, the novel visible-driven defective carbon nitride (VL/DCN) system exhibits non-photoreactivation, non-toxic superior performance compared with traditional ultraviolet radiation (UV) and UV/titanium dioxide (UV/TiO2). The inactivation of antibiotic-resistant bacteria (ARB) by novel VL/DCN still reached 7 log within 4 h, and the reduction rates of aminoglycoside gene strB and tetracycline gene tetA exceeded 0.8 log and 1.2 log, respectively. Further, the sterilization mechanism and nanotoxicity were contrastively and systematically analyzed among above three systems as following. Firstly, in the VL/DCN system, reactive oxygen species (ROSs) generated from photocatalytic process leads to the destruction of cell membranes, resulting in dissolving out of potassium ion (K+), protein and cell membrane ATP content. Thus, resistant bacteria were completely inactivated and photoreactivation disappears. In contrast, the UV only acted on bacterial DNA and existed the light resurrection. The UV/TiO2 strictly dependent on ultraviolet light and can be used in limited scenarios. Secondly, in cell viability analysis by human lung cell line BEAS-2B experiments, the 10% inhibition of cell growth when DCN was 600 mg/L much lower than 28% inhibition of cell growth when TiO2 was only 200 mg/L. The expression of pro-inflammatory cytokines ((Interleukin, IL) -6), IL-8, IL-1β) under the effect of DCN was 1.5-fold, 5.7-fold and 3.7-fold lower than TiO2, respectively. Meanwhile, DCN induced cells to produce less ROSs, malondialdehyde (MDA), and more superoxide dismutase (SOD). Above results demonstrated that DCN has far lower cytotoxicity than TiO2. This study provides theoretical support for the application of photocatalytic sterilization technology and the exploration of the toxicity of nanomaterials.

Toxicological approaches as tool to assess the effects of a mixture of photocatalytic degradation products originated from the unregulated neonicotinoid acetamiprid employing a terrestrial organism (Eisenia andrei)

Acetamiprid (ACT) has been detected in several water sources in Latin America. The presence of its degradation products in the environment is not negligible and transformation products (TPs) significantly contribute to environmental health risks. Although advanced oxidative processes are promising for the treatment of this neocotinoid, effects of these are still unknown. In this context, the effects of a mixture of photocatalytic degradation products resulting from an ACT treatment for 90 min employing TiO2/UV on cytotoxicity and oxidative stress parameters in Eisenia andrei earthworms in acute and chronic experiments using typical Latin American soil were assessed. Acute contact tests were performed (72 h) using a filter paper moistened with an ACT solution and a chronic test was performed using Oxisoil (200 g) moistened with an ACT solution for 45 days. Catalase (CAT) and glutathione-S-transferase (GST) activities, reduced glutathione (GSH) levels and cytotoxicity (cellular eleocyte and amoebocyte assessments) were investigated. Over 75 % of ACT was degraded within the first 15 min of treatment, with levels below the limit of detection after 60 min. The acute test revealed greater cytotoxic effects associated with the effluents treated for T0 and T15 min, with decreased cell density noted after 48 h of exposure, in addition to CAT induction (in all treatments) and GST induction following T0, T15 and T90 min exposures. Concerning the chronic assay, decreases in cell density (T0, T15, T60 and T90 min) and viability (T0, T60 and T90 min) were observed after 45 days, in addition to induced CAT activity following T0, T15 and T60 exposures and GST induction following the T60 min exposure. Reduced glutathione levels were unaltered, comprising the least sensitive biomarker among the investigated parameters to the treated effluent exposures. The mixture of ACT degradation products can cause toxic effects to non-target organisms, despite parent compound degradation, alerting for the need for ecotoxicological tests to prove decreased effluent toxicity, in addition to the improvement of degradation techniques.

Ultrasensitive and reversible NO2 gas sensor based on SnS2/TiO2 heterostructures for room temperature applications

Nitrogen dioxide (NO2) is one of the toxic gases produced by chemical industries, power plants, and vehicles. In this work, we demonstrate an inexpensive sensing platform for NO2 detection at room temperature (RT-32 °C) based on a charge transfer mechanism. Three-dimensional hierarchical SnS2 and SnS2/mesoporous TiO2 nanocomposites were synthesized via the solvothermal method. SnS2/20 wt% mesoporous TiO2 nanocomposites sample showed 245.4% enhanced response compared to pristine SnS2. The fabricated device exhibits excellent selectivity among all other interfering gases with one-month stability. The rapid response and enhanced response achieved were obtained for the minimum concentration of 2 ppm NO2. The formation of heterojunction between SnS2 and mesoporous TiO2 has a synergetic effect, providing more active sites and porous structures for the detection of NO2 gas molecules.

Photodynamic antibacterial application of TiO2/curcumin/hydroxypropyl-cyclodextrin and its konjac glucomannan composite films

Although photodynamic therapy (PDT) has great advantages for the treatment of bacterial infections, photosensitizers (PSs) often have many disadvantages that limit their application. Improving the shortcomings of PSs and developing efficient PDT antimicrobial materials remain serious challenges. In this study, a nanocomposite drug (TiO2/curcumin/hydroxypropyl-cyclodextrin, TiO2/Cur/HPCD) was constructed and combined with konjac glucomannan to form composite films (TiO2/Cur/HPCD films, KTCHD films). The stabilities of TiO2 and Cur were improved in the presence of HPCD. The particle size of TiO2/Cur/HPCD was approximately 33.9 nm, and the addition of TiO2/Cur/HPCD enhanced the mechanical properties of the films. Furthermore, TiO2/Cur/HPCD and KTCHD films exhibited good biocompatibility and PDT antibacterial effects. The antibacterial rate of TiO2/Cur/HPCD was 74.46 % against MRSA at 500 μg/mL and 99.998 % against E. coli at 400 μg/mL, while it was adsorbed on the surface of bacteria to improve the effectiveness of the treatment. In addition, studies in mice confirmed that TiO2/Cur/HPCD and KTCHD films can treat bacterial infections and promote wound healing, with a highest wound healing rate of 84.6 % in the KTCHD-10 films + Light group on day 12. Overall, TiO2/Cur/HPCD is a promising nano-antibacterial agent and KTCHD films have the potential to be employed as antibacterial and environment-friendly trauma dressings.

Development of chitosan-based cerium and titanium oxide loaded polycaprolactone for cutaneous wound healing and antibacterial applications

Cerium dioxide (CeO2) based nanomaterials have emerged as promising dermal equivalents, promoting fibroblast infiltration and tissues regeneration. To enhance the antibacterial and wound healing activity, herein chitosan (CS)-CeO2 combined nano titanium dioxide (TiO2) complex loaded polycaprolactone (PCL) nanohybrid (CS-CeO2/TiO2/PCL) scaffolds were prepared through casting method. The nanohybrid scaffolds' physiochemical, morphological, mechanical, and biological properties were evaluated using advanced analytical techniques. Fourier transform infrared spectroscopy spectrum evidently depicted the various intermolecular interactions on the nanohybrid scaffolds. The developed scaffold exhibited the high swelling behavior and good degradability and permeability which is beneficial for absorbing wound transudation to fasten the healing efficacy. Moreover, CS-CeO2/TiO2/PCL scaffolds owned the better antibacterial activity against bacterial strains E. coli and S. aureus. Also, MTT assay on fibroblast (NIH 3T3) cells and immortalized human keratinocytes (HaCaT) cells indicated improved cell viability and proliferation. In vivo results revealed that the fabricated scaffold full aid to complete wound closure after 14 days which showed CS-CeO2/TiO2/PCL as the significant wound dressing material with potential antibacterial immunity.

A comprehensive insight on plasma-catalytic degradation of organic pollutants in water: Comparison between ZnO and TiO2

A novel system combining underwater plasma bubbles and high voltage nanopulses was combined for the first time with ZnO and TiO2 for the degradation of organic pollutants in water. The effect of catalyst loading, discharge power and plasma gas on pollutant degradation was investigated whereas the plasma-catalytic mechanism was explored through the quantification of plasma species, COD/TOC measurements and scavenging experiments in the presence and absence of catalysts. The increased efficiency in the presence of either ZnO or TiO2, especially under plasma gases (air and oxygen) able to produce UV radiation in the range of wavelengths absorbed by both catalysts, lies on the increased concentration of the critical reactive species (e.g. ·O2-, ·ΟΗ, H2O2). Compared to plasma alone process, H2O2 was significantly enhanced in the presence of TiO2 and decreased in the presence of ZnO, whereas ·OH concentration was higher in the plasma-ZnO but lower in the plasma-TiO2 system which supports the overall superior performance of ZnO compared to TiO2. The synergy of plasma-ZnO process compared to that of plasma-TiO2 was ∼2.4 and ∼1.5 times higher for Orange II (OII) and Methylene Blue (MB), respectively, exhibiting a very low electrical energy per order (1.4 kWh m-3 for OII and 0.31 kWh m-3 or MB). The present effort contributes on providing fundamental insights and further expand of plasma-catalysis for water treatment.

Efficient sonochemical catalytic degradation of tetracycline using TiO2 fractured nanoshells

Overexposure to antibiotics originating in wastewater has profound environmental and health implications. Conventional treatment methods are not fully effective in removing certain antibiotics, such as the commonly used antibiotic, tetracycline, leading to its accumulation in water catchments. Alternative antibiotic removal strategies are garnering attention, including sonocatalytic oxidative processes. In this work, we investigated the degradation of tetracycline using a combination of TiO2 fractured nanoshells (TFNs) and an advanced sonochemical reactor design. The study encompassed an examination of multiple process parameters to understand their effects on the degradation of tetracycline. These included tetracycline adsorption on TFNs, reaction time, initial tetracycline concentration, solvent pH, acoustic pressure amplitude, number of acoustic cycles, catalyst dosage, TFNs' reusability, and the impact of adjuvants such as light and H2O2. Though TFNs adsorbed tetracycline, the addition of ultrasound was able to degrade tetracycline completely (with 100% degradation) within six minutes. Under the optimal operating conditions, the proposed sonocatalytic system consumed 80% less energy compared to the values reported in recently published sonocatalytic research. It also had the lowest CO2 footprint when compared to the other sono-/photo-based technologies. This study suggests that optimizing the reaction system and operating the reaction under low power and at a lower duty cycle are effective in achieving efficient cavitation for sonocatalytic reactions.

Flexible, recoverable, and efficient photocatalysts: MoS2/TiO2 heterojunctions grown on amorphous carbon-coated carbon textiles

Most traditional powder photocatalysts are not easily recovered. Herein, we report a flexible and recoverable photocatalyst with superior photocatalytic activity, in which MoS2/TiO2 heterojunctions are grown on amorphous carbon-coated carbon textiles (CT@C-MoS2/TiO2). Recoverable CT@C-MoS2/TiO2 textile was used to degrade 10 mg L-1 rhodamine B, leading to a degradation rate of up to 98.8 % within 30 min. Such a degradation rate is much higher than that of most of the reported studies. A density functional theory (DFT) calculation results illustrate charge transfer mechanism inside TiO2-C, MoS2-C, and MoS2/TiO2 heterojunctions, which shows that CT@C-MoS2/TiO2 textile with three electron separation channels has a high photogenerated carrier separation rate, which remarkably enhances the photocatalytic activity. Our work provides a novel strategy to design an efficient and recoverable photocatalyst with high activity.

MXene derived Ti3C2/TiO2/Ag persistent photocatalyst with enhanced electron storage capacity for round-the-clock degradation of organic pollutant

Persistent photocatalysis has garnered significant attention due to its ability to sustain catalytic activity in dark by storing electrons. However, the practical application of persistent photocatalysis is hindered by limited electron storage capacity. Herein, we synthesized and demonstrated that Ti3C2/TiO2/Ag persistent photocatalyst has good electron storage capability. The electron storage capacity of Ti3C2/TiO2/Ag is up to 0.125 μmol/mg, which is 2.5 times that of Ti3C2/TiO2. The enhanced electron storage capacity resulted in improved dark-reaction activity because more electrons react with oxygen to form more radicals, as evidenced by degradation experiments of various organics. Especially, persistent photocatalytic degradation of tetracycline hydrochloride by Ti3C2/TiO2/Ag was achieved under natural outdoor conditions (from 2:00p.m. to 8:00p.m.). Additionally, the aid of oxidants such as peroxymonosulfate (PMS) can further improve the dark-reaction activity. TiO2/Ti3C2/Ag/PMS system exhibits excellent efficacy in removing tetracycline hydrochloride, oxytetracycline, rhodamine b, methyl orange, and methylene blue, with removal rates reaching 79.5 %, 81.4 %, 98.9 %, 99.1 %, and 99.2 %, respectively (15 min of light-reaction and 45 min of dark-reaction). This work provides a new strategy to enhance electron storage capacity and demonstrates that decoupling of light-reaction and dark-reaction may provide a new opportunity for photocatalytic removal of pollutants around the clock.

Oxygen vacancy induced interaction between Pt and TiO2 to improve the oxygen reduction performance

In proton exchange membrane fuel cells (PEMFCS), a Pt-based catalyst has been plagued by activity and durability, making it difficult to implement in large-scale commercial applications. In this paper, a composite material formed by titanium dioxide and carbon black containing oxygen vacancies (TiO2(OV)-C) was used as a functional support to successfully load Pt nanoparticles (NPS). The introduction of oxygen vacancies induces the formation of a connection between Pt and TiO2, which not only strengthens the fixation of Pt by the composite support but also optimizes the local charge density of Pt. Compared with Pt/C (0.842 V) and Pt/TiO2-C (0.841 V), the half-wave potential (E1/2) of Pt/TiO2(OV)-C (0.862 V) is increased by 20 mV and 21 mV, respectively. After a long-term durability test, the E1/2 of Pt/TiO2(OV)-C is only attenuated by 5 mV. In addition, the mass activity (MA) and specific activity (SA) decreased from 183.4 mA mg-1 and 0.565 mA cm-2 to 144.4 mA mg-1 and 0.483 mA cm-2 at 0.85 V, only decreasing by 21% and 17 %, showing good stability. X-ray photoelectron spectroscopies (XPS) and density functional theory (DFT) calculations show that the interaction between Pt and TiO2 reduces the d-band center of Pt, thereby improving the desorption of intermediates *OH, which in turn promotes the activity of alkaline ORR. This study not only shows that OV plays a key role in the process of inducing interaction, but also deeply studies the influence of this interaction on the active site Pt, which provides more choices for the design of excellent multiphase catalysts.

Enhanced immobilization of Arsenic(III) and Auto-oxidation to Arsenic(V) by titanium oxide (TiO2), due to Single-Atom vacancies and oxyanion formation

Pollution control of As(III), a naturally occurring carcinogen, has recently gained a global attention, while due to the dominance of neutral H3AsO3 over a wide pH range, As(III) immobilization by most minerals is not efficient as As(V) immobilization. TiO2 shows promise for controlling As(III) pollution, and herein, a comprehensive study about As(III) adsorption by TiO2 and oxyanion formation is conducted by means of DFT + D3 methods. Both anatase and rutile are effective for As(III) adsorption, while As(III) adsorption affinities differ significantly and are -1.48 and -3.79 eV for pristine surfaces, ascend to -3.85 and -5.08 eV for O vacancies, and further to -5.37 and -5.26 eV for Ti vacancies, respectively. The bidentate binuclear complexes dominate for pristine surfaces, and O vacancies prefer OAs insertion into TiO2 lattice, while for Ti vacancies, all As(III) centers are auto-oxidized to As(V). Ti-3d, O-2p or/and As-4p rather than other orbitals contribute significantly to As adsorption, and O and Ti vacancies promote adsorption through stronger orbital hybridization. The superior adsorption for Ti vacancies originates from As(V) formation instead of bonding interactions. The formation of As oxyanions, which may occur spontaneously at pristine surfaces and is greatly promoted by O and Ti vacancies, enhances As(III) adsorption pronouncedly and becomes a viable strategy for As(III) immobilization. H2AsO3- and HAsO32- dominate for pristine surfaces and O vacancies, and for Ti vacancies, H2AsO4- and HAsO42- dominate over anatase whereas AsO43- also makes an important contribution over rutile. Results rationalize experimental observations available, and provide significantly new insights about the migration, bioavailability and fate of As(III) over TiO2 surfaces that facilitate the exploration of scavengers for As and other pollutants.

Plasma-induced oxygen defects in titanium dioxide to address the long-term stability of pseudocapacitive MnO2 anode for lithium ion batteries

In this work, we developed Manganese and Titanium based oxide composites with oxygen defects (MnOx@aTiOy) via plasma processing as anodes of lithium ion batteries. By appropriately adjusting the defect concentration, the ion transport kinetics and electrical conductivity of the electrodes are significantly improved, showing stable capacity retention. Furthermore, the incremental capacity is further activated and long-term stable cycling performance is achieved, with a specific capacity of 829.5 mAh/g at 1 A/g after 2000 cycles. To scrutinize the lithium migration paths and energy barriers in MnO2 and Mn2O3, the density functional theory (DFT) calculations is performed to explore the lithium migration paths and energy barriers. Although the transformation of MnO2 into Mn2O3 through oxygen defects was initially surmised to inhibit Li ions along their standard routes, our results indicate quite the contrary. In fact, the composite's lithium diffusion rate saw a substantial increase. This can be accredited to the pronounced enhancement of conductivity and ion transport efficiency in the amorphous and porous TiOy.

Preparation and characterization of carnauba wax-based particle with hierarchical structure and its use as hydrophobic coating for chitosan films

To improve the hydrophobicity of polysaccharide-based films, hydrophobic carnauba wax-based particles were prepared by Pickering emulsion. The influence of the different size of the particles on the structure and hydrophobicity of the chitosan coating films were investigated. The results showed that micro-scale particles (average particle size 25.04 μm) with nano-scale (5-10 nm) TiO2 uniformly distributed on the surface of the particles were formed by Pickering emulsion. The chitosan coating films showed higher contact angle and lower sliding angle compared to the control due to the hierarchical structure, hydrophobicity and arrangement of the particles. In addition, the small particle (23-48 μm) coating film showed higher hydrophobicity than the large particle coating film (48-70 μm) due to the small particle size and the formation of more small gaps. The gaps were conducive to form "air cushion" which reduced the contact area between water and the coating films and thus increased contact angle and decreased sliding angle. The coating films showed high chemical stability and low residual rates of liquid food. The results suggest that Pickering emulsion is an effective method to create wax-based particles with hierarchical structure and the particles have potential to be used as hydrophobic coating materials.

Band edges positions prediction of the of Ag nanocluster-decorated titania surfaces and their relationship to NO and NO2 interaction from first-principles calculations

Metal nanoclusters deposited on oxides have been widely used in photocatalysis playing an important role in the design of model catalysts with applications in heterogeneous catalysis. In particular, we are interested in the potential activity of these cluster-supported systems for the removal of nitrogen oxides either by possible catalytic reduction and/or by their adsorption. In this work, using first-principles methods, we evaluate the main characteristics of Agn (n = 1-4) nanoclusters isolated and deposited on anatase TiO2(101) and rutile TiO2(110) surfaces. Our results indicate that they are preferably adsorbed on rutile surface. The different formation energy at each surface can be explained using a Bader charge analysis. Particularly for Ag4 the lowest formation energy is obtained for tetrahedral geometry while the isolated Ag4 geometry is planar. Small silver deposits placed superficially on titania surfaces modify its electronic structures and improve the conduction band edges positions for possible NO reduction. Band edges positions with respect to the vacuum potential have been studied. The comparison of the conduction band minimum with the reduction potentials of NO/N2O and N2O/N2 shows that they are higher, being Ag3 on rutile and Ag1, Ag2 and Ag4P on anatase better for NO reduction. To complete the analysis, the calculation of work function, energy gap, ionization energy and electron affinity are relevant since they allow the location of semiconductor band edges at point of zero charge. Finally, the adsorption of nitrogen oxides is studied where the NO2 adsorption is favored over NO.

Adsorption and photodegradation of micropollutant in wastewater by photocatalyst TiO2/rice husk biochar

With the acceleration of global industrialization, organic pollutants have become a threat to ecological safety and human health. This work prepared TiO2/rice husk biochar (TiO2/BC) for removal of bisphenol A (BA) micropollutant in wastewater. Experiment results revealed a low BA removal efficiency by TiO2/BC was observed at 34.5% under the dark environment. However, the removal rate of BA by UV light-assisted TiO2/BC significantly increased to 97.6% in 1 h. The results also demonstrated that the removal performance of BA using TiO2/BC was 2.1times higher than that of commercial TiO2 (46.4%). Besides, the removal efficiency of BA by reused TiO2/BC after eight cycles slightly decreased by 12.8%, demonstrating the excellent properties of the prepared composite. TiO2/BC also exhibited high removal efficiency of BA (over 89%) from the synthetic wastewater sample, indicating the potential utilization of composite for removing BA in wastewater. This work provides a new way to turn biomass waste into useful material and effective method to remove micropollutant BA.

Multi-antibiotics removal under UV-A light using sol-gel prepared TiO2: Central composite design, effect of persulfate addition and degradation pathway study

The removal of three antibiotics i.e., metronidazole (MNZ), ciprofloxacin (CIP) and tetracycline (TET), from aqueous system via TiO2 photocatalysis under UV-A light was investigated. Photocatalyst(s) were prepared using sol-gel method under different calcination temperatures (400-800 °C) and water-alcohol ratio. The spherical shaped catalyst (mean particle size ∼ 61 nm) was characterized via FTIR, XRD, BET, SEM, Raman, XPS, UV-DRS, and Fluorometry, and point of zero charge was also determined (pHPZC ∼ 6.6). Batch photo-catalytic degradation studies have shown complete degradation of MNZ, CIP and TET after 50, 75 and 20 min with a TOC removal of 37%, 44% and 31%, respectively. The activity of sol-gel prepared TiO2 was comparatively higher than commercially available pure anatase TiO2 nanoparticles due to lesser mean particle size. The ratio of water to alcohol in the preparation of TiO2 catalyst was found to have significant effect on antibiotic removal. Moreover, persulfate (PS) addition of 0.1 g/L amplified the pseudo-first-order removal-rate constant by 2.75, 3.3 and 1.6 times for MNZ, CIP and TET, respectively. The higher initial pH values (8 and 10) have shown the best removal efficiency for all antibiotics. Subsequently, central composite design (CCD) experiments were conducted under multi-antibiotic conditions. Near complete removal of all antibiotics were observed within 120 min. Scavenging studies revealed that hydroxyl and superoxide radicals play major roles in photo-catalytic degradation of MNZ, CIP and TET. During photocatalysis, MNZ degradation was initiated by hydroxylation reaction, CIP by piperazine ring opening by hydroxyl attack and TET by multiple hydroxylation process. Overall, TiO2 showed good efficiency at degrading multiple antibiotics and has the potential for practical application on a larger scale.

Hybrid TiO2/Carbon quantum dots heterojunction photoanodes for solar photoelectrocatalytic wastewater treatment

The modification of titanium dioxide (TiO2) is a strategy to maximize the utilization of sunlight. Carbon quantum dots (CQDs) are carbon nanomaterials with outstanding optical and electronic properties that are suitable for that purpose. In this work, three types of hybrid TiO2/CQD photoelectrodes were synthesized following different methods: 1) deposition of a CQD layer on top of TiO2 (labelled as TiO2-CQD); 2) deposition of a TiO2 layer on top of CQDs (labelled as CQD-TiO2) and; 3) deposition of a mixed CQD + TiO2 layer (labelled as CQD + TiO2). The photoelectrodes were investigated for the photoelectrocatalytic degradation of phenol as model pollutant under simulated solar light and TiO2-CQD showed the highest apparent reaction rate constant of kapp = 0.0117 min-1 with 40% of TOC removal in 6 h of treatment. CQDs were found to enhance photon absorption in the visible region of the electromagnetic spectrum and in turn phenol degradation by promoting the separation of photogenerated charge carriers through electron transfer via the Ti-O-C bonds formed at the TiO2-CQD interface. Finally, the performance of the TiO2-CQD photoanode was evaluated for the treatment of real wastewater from the membrane fabrication sector, confirming its photoelectrocatalytic efficiency under solar radiation with 93% of TOC removal in 8 h of treatment and kapp = 0.0058 min-1.

Efficiency of CuCr2O4/Titanium dioxide nanoparticles composite for organic dye removal in aqueous solutions

Semiconductor metal oxide with TiO2 nanoparticles removes hazardous compounds from environmental samples. TiO2 nanoparticles have shown potential as an efficient photocatalyst by being employed as a nano-catalyst for the breakdown of organic contaminants in wastewater samples. To separate substances from contaminated samples, combined UV and visible light irradiation has been used. Sol-gel synthesis was used to produce a copper chromite-titanium nanocomposite, which was then evaluated using analytical methods, such as XRD, BET, DRS-UV, and FT-IR. Using visible light, the photocatalytic activity of a nanocomposite made of CuCr2O4 and TiO2 was investigated for its role in the breakdown of malachite green. The effects of several parameters, including pH change, anions presence, contact time, catalyst amount, concentration variation, and the kinetics of photocatalytic degradation were investigated. The magnitude of transition energy calculated using UV-DRS spectra was found to be 3.1 eV for CuCr2O4-TiO2 nanocomposite. Maximum degradation was observed at pH 7.0. The surface area and pore volume of the co-doped samples of Cr2O4 - TiO2 obtained from BET were found to be 6.1213 m2/g and 0.045063 cm3/g respectively. The average particle size of the catalyst of the nano-catalysts calculated from XRD was found to be 8 nm for TiO2 and 66 nm for TiO2-CuCrO4. The peaks obtained in FTIR between the range of 900-500 cm-1 were due to the presence of an aromatic compound. The binding mechanism of a dye molecule to the surface of CuCr2O4-TiO2 nanocomposite was analysed using quantum chemical calculations with the self-consistent reaction field technique employing integral equation formalism for the polarized continuum method and the UFF atomic radii set.

Electrospun TiO2-GO/PAN-CA nanofiber mats: A novel material for remediation of organic contaminants and nitrophenol reduction

The outstanding properties of nanofiber composites have made them a popular choice for various structural applications. Recently, there has been a growing interest in using electrospun nanofibers as reinforcement agents, which possess exceptional properties that can enhance the performance of these composites. Herein, TiO2-graphene oxide (GO) nanocomposite incorporated into polyacrylonitrile (PAN)/cellulose acetate (CA) nanofibers were fabricated by an effortless electrospinning technique. The chemical and structural characteristics of the resulting electrospun TiO2-GO nanofibers were examined employing diverse techniques such as XRD, FTIR, XPS, TGA, mechanical properties, and FESEM. Remediation of organic contaminants and organic transformation reactions with electrospun TiO2-GO nanofibers were performed. The results indicated that the incorporation of TiO2-GO with various TiO2/GO ratios did not affect the molecular structure of PAN-CA. Still, they did significantly increase the mean fiber diameter (234-467 nm) and the mechanical properties of the nanofibers comprising UTS, elongation, Young's modulus, and toughness compared to PAN-CA. From various ratios of TiO2/GO (0.01TiO2/0.005GO and 0.005TiO2/0.01GO) in the electrospun NFs, the nanofiber containing a high content of TiO2 showed over 97% of the initial MB dyes were degraded after 120 min of visible light exposure and the same nanofibers also, achieved 96% nitrophenol conversion to aminophenol in just 10 min with activity factor kAF value of 47.7 g-1min-1. These findings illustrate the promise of TiO2-GO/PAN-CA nanofibers for use in various structural applications, particularly in the remediation of organic contaminants from water and organic transformation reactions.

Chitosan and TiO2 functionalized polypropylene nonwoven fabrics with visible light induced photocatalytic antibacterial performances

Chitosan/TiO2 functionalized polypropylene (CS/TiO2/PP) nonwoven fabrics were fabricated through crosslinking of chitosan with glutaraldehyde followed by loading of TiO2 nanoparticles. The functionalized CS/TiO2/PP has super hydrophilicity and excellent visible light induced photocatalytic antibacterial properties owing to the synergistic effects of CS and TiO2. The photocatalytic degradation performance was determined by assessing the degradation of methyl blue under simulated visible light irradiation and its recyclability was also evaluated. In addition, SEM images demonstrated that TiO2 nanoparticles were distributed evenly on the surface of the 2 g/L CS/TiO2/PP. Meanwhile, the polypropylene surface showed a significant increase in hydrophilicity after being treated with chitosan and TiO2. The photocatalytic degradation results revealed that CS/TiO2/PP had higher photocatalytic properties than those of pure PP under visible light, and the degradation rate of methylene blue reached 96.4 % after 90 min of light exposure. Compared to pure PP, the antibacterial properties of CS/TiO2/PP significantly increased, and the bacterial reduction percentages were increased to 98.7 % and 96.3 %, against E. coli and S. aureus, respectively. The functionalized CS/TiO2/PP composites exhibited promising potential in environmentally friendly antibacterial materials.

Visible-light-driven peroxymonosulfate activation by robust TiO2-base nanoparticles for efficient removal of sulfamethoxazole

In this study, a novel bimetallic Co-Mo-TiO2 nanomaterial was fabricated through a simple two-step method, and applied as photocatalyst to activate peroxymonosulfate (PMS) with high efficiency for sulfamethoxazole (SMX) removal under visible light. Nearly 100% of SMX was degraded within 30 min in Vis/Co-Mo-TiO2/PMS system, and its kinetic reaction rate constant (0.099 min-1) was 24.8 times higher compare with the Vis/TiO2/PMS system (0.014 min-1). Moreover, the quenching experiments and the electronic spin resonance analysis results confirmed that both 1O2 and SO4•- were the dominant active species in the optimal system, and the redox cycles of Co3+/Co2+ and Mo6+/Mo4+ promoted the generation of the radicals during the PMS activation process. Additionally, the Vis/Co-Mo-TiO2/PMS system exhibited a wide working pH range, superior catalytic performance toward different pollutants and excellent stability with 92.8% SMX removal capacity retention after three consecutive cycles. The result of density functional theory (DFT) suggested that Co-Mo-TiO2 exhibited a high affinity for PMS adsorption, as indicated by the length O-O bond from PMS and the Eads of the catalysts. Finally, the possible degradation pathway of SMX in optimal system was proposed through intermediate identification and DFT calculation, and a toxicity assessment of the by-products was also conducted.

Electrochemical sensor for sensitive detection of bisphenol A based on molecularly imprinted TiO2 with oxygen vacancy

Bisphenol A (BPA) is an endocrine disrupting chemical and broadly used in plastics. The leakage of BPA in food and water cycles poses a significant risk to the environment and human health. Thus, monitoring the concentration of BPA to avoid its potential risk is highly important. In this work, a simple and efficient oxygen deficient molecularly imprinted TiO2 electrochemical sensor was proposed for the detection of BPA. The introduction both oxygen vacancies and molecular imprinting evidently enhanced the electrochemical oxidation signal of BPA. The sensor had a good linear response ranging from 0.01 μM to 20 μM with a limit of detection of 3.6 nM. Additionally, the sensor showed remarkable stability, reproducibility and interference resistant ability. It also exhibits excellent recovery during the detection of real water. These findings suggested that the sensor has the potential to be developed as a simple, efficient and low-cost monitoring system for the monitoring of BPA in water.

Visible-light photocatalytic degradation of water-soluble polyvinyl alcohol in aqueous solution by Cu2O@TiO2: Optimization of conditions, mechanisms and toxicity analysis

Polyvinyl alcohol (PVA), a water-soluble synthetic polymer, is one of the most prevalent non-native polyvinyl alcohols found in the environment. Due to its inherent invisibility, its potential for causing severe environmental pollution is often underestimated. To achieve efficient degradation of PVA in wastewater, a Cu2O@TiO2 composite was synthesized through the modification of titanium dioxide with cuprous oxide, and its photocatalytic degradation of PVA was investigated. The Cu2O@TiO2 composite, supported by titanium dioxide, facilitated photocarrier separation and demonstrated high photocatalytic efficiency. Under alkaline conditions, the composite exhibited a 98% degradation efficiency for PVA solutions and a 58.7% PVA mineralization efficiency. Radical capture experiments and electron paramagnetic resonance (EPR) analyses revealed that superoxide radicals primarily drive the degradation process within the reaction system. Throughout the degradation process, PVA macromolecules are broken down into smaller molecules, including ethanol, and compounds containing aldehyde, ketone, and carboxylic acid functional groups. Although the intermediate products exhibit reduced toxicity compared to PVA, they still pose certain toxic hazards. Consequently, further research is necessary to minimize the environmental impact of these degradation products.

Applicability of core-shell SiO2 microspheres with a high TiO2 loading as stationary phase for HPLC

BACKGROUND

Due to its high chemical stability, sufficient rigidity and zwitterionic ion exchange properties, TiO₂ can be considered as an alternative stationary phase material to SiO₂ for high performance liquid chromatography. TiO₂ stationary phase is usually prepared by coating TiO₂ onto SiO₂ support by sol-gel method. However, in the traditional coating method, in order to overcome the rapid hydrolysis rate of tetrabutyl orthotitanate, only a very low concentration of tetrabutyl orthotitanate can be used, resulting in a low loading of TiO₂ on the support.

RESULTS

TiO₂ core-shell spheres with a good monodispersity were prepared using 0.25 mol L^-1 tetrabutyl orthotitanate. The specific surface area, pore volume, pore diameter and TiO₂ loading of the TiO₂ core-shell spheres were 66 m² g^-1, 0.15 cm³ g^-1, 9.8 nm and 57%, respectively. The core-shell spheres were derivatized with n-octadecyltrichlorosilane and then packed into a stainless steel column to test the separation performance for neutral, basic and acidic samples in liquid chromatography. A baseline separation of polyaromatic hydrocarbons was achieved, showing a column efficiency for fluorene of 118075 plates m^-1. The prepared stationary phase was also used to separate acidic and basic mixtures, and column efficiencies of 54500 and 25836 plates m^-1 were obtained for N,N-dinitroaniline and p-chlorophenol, respectively. The relative standard deviations of the retention times of polyaromatic hydrocarbons for run-to-run, day-to-day and column-to-column repeatability were all below 5.1%.

SIGNIFICANCE AND NOVELTY

This work demonstrated that TiO₂ can be coated in the pores of the shell of SiO₂ core-shell spheres with high TiO₂ loading using a high concentration of tetrabutyl orthotitanate as the titania source. The experimental results show that the TiO₂ coated core-shell spheres can be a good alternative stationary phase for liquid chromatography.

Photocatalytic depolymerization of lignin via oxidizing cleavage of Cα-Cβ bonds in micellar aqueous media

Photocatalytic depolymerization of lignin to prepare high-value chemicals is a promising way to promote the valuable utilization of lignin. However, the complexity and stubbornness of lignin structure seriously decrease the photocatalytic efficiency and selectivity. Herein, the micellar aqueous media (SDS-8/HCl) consisting of sodium lauryl sulfonate and hydrochloric acid was successfully prepared. Photocatalyst TiO2 and SDS-8/HCl system can effectively depolymerize the typical β-1 lignin models and ethanol organosolv lignin to value-added chemicals by oxidizing cleavage of lignin Cα-Cβ bonds. The addition of hydrochloric acid solution (1 mol/L) improves the selectivity of photocatalytic breaking of lignin Cα-Cβ bonds. Chlorine ions are oxidized to chlorine radicals by photogenerated holes and hydroxyl radicals, dramatically increasing the photocatalytic efficiency. Electron paramagnetic resonance technique and Gas chromatography-mass spectrometry were used to demonstrate the presence of chlorine radicals. Under optimal conditions, the conversion of substrate Dpol is 98.4 %, and the obtained products are mainly benzaldehyde and benzoic acid. Isotope labeling experiments show that water is also involved in photocatalytic reactions and the oxygen needed to form the product benzaldehyde comes from water. Single-electron transfer processes are possible photocatalytic mechanisms that differ from the previous reports. Importantly, water and chlorine ions were found to be involved in photocatalytic reactions for the first time and promote the cleavage of lignin Cα-Cβ bonds. This work provides new ideas for photocatalytic cleavage of lignin Cα-Cβ bonds in heterogeneous photocatalytic systems using micellar aqueous media.

Versatile application of BiVO4/TiO2 S-scheme photocatalyst: Photocatalytic CO2 and Cr(VI) reduction

Herein, the synthesis, characterization, and reduction properties of 2D TiO₂ aerogel powder decorated with BiVO₄ (TiO₂/BiVO₄) were investigated for versatile applications. First, 2D TiO₂ was prepared via lyophilization and subsequently modified with BiVO₄ using a wet impregnation method. The morphology, structure, composition, and optical properties were evaluated using transmission electron microscopy (TEM), X-ray diffractometry (XRD), laser-induced breakdown spectroscopy (LIBS), and diffuse reflectance spectroscopy (DRS), respectively. Significantly enhanced photocurrent densities (by 3-15 times) were obtained for TiO₂/BiVO₄ compared to those of pure TiO₂ and BiVO₄. The reduction of toxic Cr(VI) to Cr(III) was assessed, including the effect of pH on overall photocatalytic efficiency. Under acidic conditions (pH ∼ 2), Cr(VI) reduction efficiency reached 100% within 2 h. For photocatalytic CO₂ reduction, the highest yields of CH₄ and CO were obtained using TiO₂/BiVO₄. A higher efficiency for both applications was achieved because of the better separation of the electron-hole pairs in TiO₂/BiVO₄. The excellent stability of TiO₂/BiVO₄ over repeated runs highlights its potential for use in versatile environmental applications. The efficiency of TiO₂/BiVO₄ is due to the interplay of the structure, morphology, composition, and photoelectrochemical properties that favour the material for the presented herein photocatalytic applications.

Synergistic effect of TiO2 nanostructured cathode in microbial fuel cell for bioelectricity enhancement

Nano-bedecking of electrode with nanoparticles is an effective method to improve power generation of microbial fuel cells (MFCs). In this study, different concentrations (0.25 mg cm^-2, 0.50 mg cm^-2, 0.75 mg cm^-2 and 1.0 mg cm^-2) of TiO₂ nanoparticles of size 10-25 nm were overlaid on the carbon cloth (CC) using spray pyrolysis technique and used as catalytic cathode in a dual-chambered microbial fuel cell treating distillery wastewater. Results evidenced that TiO₂ nanoparticles modified cathode increased the power generation and recorded a highest power and current density of 162.5 ± 2 mW m^-2 and 1.4 ± 0.005 A m^-2, respectively. Carbon cloth coated with 0.50 mg cm^-2 TiO₂ nanoparticles showed 2.8 and 7.3 times higher current and power density as compared to uncoated cathode. MFC operated at a hydraulic retention time (HRT) and organic loading rate (OLR) of 72 h and 59.2 g COD L^-1 d^-1 showed a maximum chemical oxygen demand (COD) removal of 72.3% which was 15.3% higher than the control MFC. Likewise, the coulombic efficiency of control and modified MFC was 33% and 44%, respectively. The maximum NO₃^-- N, NO₂^-- N and NH₄⁺- N removal efficiency of 77.3%, 49.9% and 59.4% were observed for TiO₂ nanoparticles modified electrode which was 19.3%, 11.4% and 10.5% higher than control. TiO₂ modified cathode was effective in enhancing the bioelectricity generation in MFCs.

Fabrication of durable self-cleaning photocatalytic coating with long-term effective natural light photocatalytic degradation performance

The practical application of photocatalytic coating has been greatly challenged in terms of its long-term effective natural light photocatalytic degradation due to its vulnerability and easy contamination caused by poor self-cleaning properties. In this work, photocatalytic coating with self-cleaning properties was prepared by spraying fluorinated dual-scale TiO₂ on the inorganic lithium silicate adhesive, enabling excellent durability and long-term effective photocatalytic degradation performance under natural light. The coating exhibits superhydrophobic properties even after abrasion testing, acid and alkali immersion testing, and UV aging, laying a foundation for the practical use. Moreover, the coating can be applied to various substrates and its excellent self-cleaning properties make it resistant to particulate and liquid contamination that may occur in the environment. Besides, we evaluated the photocatalytic stability of the coating by subjecting it to acidic and alkaline environments and high pollution concentrations. Furthermore, benefiting from the synergistic effect of photocatalytic and self-cleaning properties, the coating achieves long-term effective photocatalytic degradation of dye wastewater under natural light, which still has a high removal rate of 95.8% for methylene blue even after 30 cycles of use. Meanwhile, due to the coating's excellent durability, the long-term quality loss rate of the coating still remained below 0.3%, which avoids the risk of secondary environmental pollution caused by nanoparticle leakage. Therefore, these excellent properties enable the coating to have a broad range of application prospects for the treatment of pollutants in water.

Composite nanoarchitectonics with TiO2 nanocrystals and superior thin Ti3C2Tx nanosheets towards efficient NO removal

Accordion-like Ti₃C₂T_x MXene supplied a possibility to construct two-dimensional composites with novel performance. In this paper, few-layered Ti₃C₂T_x MXene was created via a chemical etching strategy. The oxidation in-situ using a powerful alkaline solution resulted successfully in TiO₂ nanocrystals grown on Ti₃C₂T_x nanosheets. The alkaline treatment adjusted terminations of the Ti₃C₂T_x MXene and controlled the oxidation degree by changing temperature. The ratio of Ti₃C₂T_x and TiO₂ was finally optimized. Because of Ti₃C₂T_x nanosheets with well conductivity and excellent light absorption as well as TiO₂ nanocrystal arrays on Ti₃C₂T_x nanosheets with a high specific surface area and more active sites, TiO₂/Ti₃C₂T_x composites revealed excellent photocatalystic activity, especially for NO removal. The improvement of separation and transfer efficiency of phootogenerated carriers is ascribed to the microstructure of TiO₂/Ti₃C₂T_x composites. The composite sample synthesized at 75 °C revealed the best NO removal efficiency, in which 70% of NO was removed at a concentration of 600 ppb. This study offers a new thought for preparing high performance MXene-based photocatalysts.

Antibiotics oxytetracycline removal by photocatalyst titanium dioxide and graphitic carbon nitride in aquaculture wastewater

The surge in the use of antibiotics, especially in aquaculture, has led to development of antibiotic resistance genes, which will harm environmental and public health. One of the most commonly used antibiotics in aquaculture is oxytetracycline (OTC). Employing photocatalysis, this study compared OTC degradation efficiency of two different types of common photocatalysts, TiO₂ and graphitic carbon nitride (GCN) in terms of their photochemical properties and underlying photocatalytic mechanism. For reference purpose, self-synthesized GCN from urea precursor (GCN-Urea) and commercial GCN (GCN-Commercial) were both examined. OTC adsorption-photocatalysis removal rates in pure OTC solution by TiO₂, GCN-Urea and GCN-Commercial were attained at 95%, 60% and 40% respectively. Photochemical properties evaluated included light absorption, band gap, valence and conduction band positions, photoluminescence, cyclic voltammetry, BET surface area and adsorption capability of the photocatalysts. Through the evaluations, this study provides novel insights towards current state-of-the-art heterogeneous photocatalytic processes. The electron-hole recombination examined by photoluminescence is not the key factor influencing the photocatalytic efficacies as commonly discussed. On the contrary, the dominating factors governing the higher OTC degradation efficiency of TiO₂ compared to GCN are the high mobility of electrons that leads to high redox capability and the high pollutant-photocatalyst affinity. These claims are proven by 86% and 40% more intense anodic and cathodic cyclic voltammetry curve peaks of TiO₂ as compared to both GCNs. OTC also demonstrated 1.7 and 2.3 times higher affinity towards TiO₂ than GCN-Urea and GCN-Commercial. OTC removal by TiO₂ in real aquaculture wastewater only achieved 50%, due to significant inhibition effect by dissolved solids, dissolved organic matters and high ionic contents in the wastewater.

Highly customized porous TiO2-PANI nanoparticles with excellent photocatalytic efficiency for dye degradation

The present work encompasses a simple strategy to synthesize highly porous TiO₂ by incorporating PANI polymer into the sol-gel chemistry of Titanium dioxide/Titanium (IV)-iso-propoxide (TiO₂/TTIP). A series of TiO₂ samples by varying wt.% of PANI, have been synthesized. A probable growth mechanism has been presented for the formation of a porous ginger-like nanostructure of TiO₂-PANI (TP). HRTEM images reveal that the particle size range is 6-16 nm for pristine TiO₂ and 5-13 nm for TP samples. XPS analysis confirms the presence of the hydrogen bonds in-between surface hydroxyl groups (Ti-OH) of TiO₂ and the protonated nitrogen of PANI. UV-visible absorption study reveals a small shift towards longer wavelength for TP8 sample than that of pristine TiO₂ (λ_max = 314 nm) as well as reduction in E_g value from 3.02 eV to 2.89 eV. FTIR results confirm the successful interaction of PANI and TiO₂. BJH and BET analysis confirms an increase of porosity in TP8 sample with an average pore volume of 0.36 cm³ g^-1. High photocatalytic activity (98.77%) towards Methylene blue dye degradation is observed for TP8 sample having 8 wt% of PANI and it is explained through the combined effect of structural porosity of TiO₂ and synergic effect of PANI. The K_appa value at pH 11 (0.01372 min^-1) is found to be 7.84-folds higher than that of the photocatalytic reaction at pH 3 (K_appa = 0.00175 min^-1). While pristine TiO₂ exhibits the minimum removal efficiency (89.57%) with K_appa of 0.00756 min^-1. K_appa value of catalysis reaction for TP8 is found to be almost 2-fold higher than pristine TiO₂. Quantum Yield value for TP8 is found to be 3.59 × 10^-4 molecules photon^-1. This high Quantum Yield value of present photocatalytic system explicates the low energy consumption for the treatment of textile dye pollutant. Additionally, STY value (1.79 × 10^-5 molecules photon^-1 mg^-1) confirms the outstanding mineralization strength of TP8 by a unit mass for high amounts of MB dye per unit time. Thus, the present study offers an excellent photocatalyst i.e., TP8 having 8 wt% of PANI for the degradation of MB dye.

A simple nanocomposite photocatalyst HT-rGO/TiO2 for deoxynivalenol degradation in liquid food

A simple nanocomposite photocatalyst HT-rGO/TiO₂ for deoxynivalenol (DON) degradation was synthesized by hydrothermal method to maintain the quality of cereal grains and byproducts. The characterization of HT-rGO/TiO₂ was analyzed by XRD, FTIR, Raman spectroscopy, and XPS. Moreover, according to UV-vis DRS analysis, HT-rGO/TiO₂ had a smaller band gap, indicating a wider response range to light and a higher utilized rate of quantum photons. Additionally, the results of LC-MS showed that the hydroxyl group at the C3 position, and the unsaturated bond between C9 and C10, and the epoxy group at C12 and C13 positions of DON molecule were destroyed step by step by photocatalytic degradation. These groups have active effects on the DON toxicity, which means it is successful to degrade DON in liquid-food by HT-rGO/TiO₂ photocatalyst.

Photodegradation of hazardous organic pollutants using titanium oxides -based photocatalytic: A review

Titanium oxide-based photocatalysts (TOBPs) have been widely utilized as potential materials for numerous applications, such as wastewater treatment, water-splitting reactions, carbon dioxide (CO₂) reduction and photosynthesis. However, the large bandgap of intrinsic TiO₂ limits their absorption toward visible light, which is the central part of the solar spectrum, resulting in low photocatalytic activities under sunlight. To overcome this obstacle, several strategies, such as doping with either metal or non-metal elements or combining with other compounds, are efficient ways to reduce the bandgap of TiO₂, leading to effectively extending their absorption toward the visible region and increasing their catalytic performance. In this review, we discussed the application of TOBPs for the photodegradation of hazardous organic pollutants in wastewater to produce quality reused water. The synthesis of TiO₂ and the enhancement of photocatalytic activities of TOBPs by different techniques with detailed information were provided. Application of TOBPs for decomposing hazardous organic pollutants such as dyes, phenolic compounds and pharmaceuticals under optimum conditions have been listed. Also, the photodegradation mechanisms of hazardous organic compounds have been investigated. This work also brings ideas for future perspectives and research plan to inhibit the disadvantages and expand the application of TOBPs to remove toxic organic pollutants.

Interfacial molecular regulation of TiO2 for enhanced and stable cocatalyst-free photocatalytic hydrogen production

On the basis of the inherent property limitations of commercial P25-TiO₂, many surface interface modification methods have attracted substantial attention for further improving the photocatalytic properties. However, current strategies for designing and modifying efficient photocatalysts (which exhibit complicated manufacturing processes and harsh conditions) are not efficient for production that is low cost, is nontoxic, and exhibits good stability; and therefore restrict practical applications. Herein, a facile and reliable method is reported for in situ amine-containing silane coupling agent functionalization of commercial P25-TiO₂ by covalent surface modification for constructing a highly efficient photocatalyst. As a consequence, a high efficiency of H₂ evolution was achieved for TiO₂-SDA with 0.95 mmol h^-1 g^-1 (AQE ∼45.6 % at 365 nm) under solar light irradiation without a co-catalyst. The amination modification broadens the light absorption range of the photocatalyst, inhibits the binding of photogenerated carriers, and improves the photocatalytic efficiency; which was verified by photochemical properties and DFT theoretical calculations. This covalent modification method ensures the stability of the photocatalytic reaction. This work provides an approach for molecularly modified photocatalysts to improve photocatalytic performance by covalently modifying small molecules containing amine groups on the photocatalyst surface.