Facile synthesis of NiCoSe2@carbon anode for high-performance sodium-ion batteries

Sodium-ion batteries offer significant advantages in terms of low-temperature performance and safety. In this study, we present a straightforward synthetic approach to produce bimetallic selenide NiCoSe2 nanoparticles grown on a three-dimensional porous carbon framework for application as anode materials in sodium-ion batteries. This unique architecture enhances reaction kinetics and structural stability. The three-dimensional interconnected porous carbon network establishes a continuous pathway of electronic conductive, while increasing specific surface area and mitigating volume expansion. Consequently, these features expedite ion transfer and enhance electrolyte interaction. Notably, compared to CoSe, NiCoSe2 exhibits reduced ion transport distances and lower sodium diffusion barriers. Leveraging these attributes, NiCoSe2/N, Se co-doped carbon composite materials (NiCoSe2/NSC) demonstrate a high specific capacity of 320.8 mAh/g, even after 1000 cycles at 5.0 A/g, with a capacity retention rate of 85.1%. The study further delves into the revelation of the reaction mechanism and ion transport pathway through in-situ X-ray diffraction (XRD) analysis and theoretical calculations. The development of these anode materials is poised to pave the way for advancements in sodium-ion battery technology.

Understanding the Remarkable Stability of Well-defined Dinuclear Copper(I) Carbene Complexes

The synthesis of a well-defined dicopper carbene complex supported by the PNNP (2,7-bis(di-tert-butylphosphaneyl)methyl-1,8-naphthyridine) expanded pincer ligand is reported. This carbene complex is remarkably stable, even in the presence of air and water. The reactivity of this complex was explored towards typical carbene transfer substrates and its electronic structure was investigated. Using a combination of experiments and DFT calculations, the principles that underly the stability of dinuclear carbene complexes are probed.

Hierarchical N-doped porous carbon scaffold Cu/Co-oxide with enhanced electrochemical sensing properties for the detection of glucose in beverages and ascorbic acid in vitamin C tablets

This research focuses on the development of a highly efficient electrocatalyst, CuxO/NPC@Co3O4/NPC-10-7, for detecting glucose and ascorbic acid. In a 0.1 M NaOH solution, the modified electrode exhibits a sensitivity of 3314.29 μA mM-1 cm-2 for glucose detection. The linear range for ascorbic acid sensing is 0.5 μM - 23.332 mM, with a detection limit as low as 0.24 μM. In a 0.1 M PBS solution, the linear range for ascorbic acid detection extends to 43.328 mM, which represents the best performance reported to date by chronoamperometry. Moreover, the electrode demonstrates high accuracy, with a recovery rate of 96.80 % - 103.60 % for glucose detection and a recovery rate of 95.25 % - 104.83 % for ascorbic acid detection. These results suggest that the CuxO/NPC@Co3O4/NPC-10-7 modified electrode shows significant potential for practical applications in food detection.

Novel magnetic bimetallic AuCu catalyst for reduction of nitroarenes and degradation of organic dyes

Herein, core-shell magnetic nanoparticles are modified with imidazolium-tagged phosphine and propylene glycol moieties and used for the stabilization of bimetallic AuCu nanoparticles. The structure and morphology of the prepared material are identified with SEM, TEM, XRD, XPS, atomic absorption spectroscopy, Fourier translation infrared spectroscopy, and a vibrating sample magnetometer. This hydrophilic magnetic bimetallic catalyst is applied in the reduction of toxic nitroarenes and reductive degradation of hazardous organic dyes such as methyl orange (MO), methyl red (MR), and rhodamine B (RhB), as well as in the degradation of tetracycline (TC). This magnetic AuCu catalyst indicated superior activity in all three mentioned reactions in comparison with its single metal Au and Cu analogs. This catalyst is recycled for 17 consecutive runs in the reduction of 4-nitrophenol to 4-aminophenol without a significant decrease in catalytic activity and recycled catalyst is characterized.

Copper-zinc nanoparticle-decorated nitrogen-doped carbon composite for electrochemical determination of triclosan

A new sensor based on copper-zinc bimetal embedded and nitrogen-doped carbon-based composites (CuZn@NC) was prepared for triclosan (TCS) detection by pyrolyzing the precursor of Cu-Zn binuclear metal-organic framework (MOF). The performance for detecting TCS was evaluated using linear scanning voltammetry (LSV) and differential pulse voltammetry (DPV), and the proton and electron numbers during TCS oxidation have been proved to be one-to-one. The results indicated that CuZn@NC can present a satisfactory analysis performance for TCS detection. Under the optimized conditions, the linear response range was 0.2-600 µM and the detection limit was 47.9 nM. The sensor presented good stability (signal current dropped only 2.5% after 21 days) and good anti-interference of inorganic salts and small molecular organic acids. The good recovery (97.5-104.1%) for detecting spiked TCS in commercial products (toothpaste and hand sanitizer) suggested its potential for routine determination of TCS in real samples.

Rapid SERS assay for determination of the opioid fentanyl using silver-coated sharply branched gold nanostars

A high-throughput surface-enhanced Raman scattering (SERS)-sensing platform is presented for FNT detection in human urine without any sample preparation. The sensing platform is based on plasmonics-active silver-coated sharply branched gold nanostars (SGNS). The effect of silver thickness was investigated experimentally and theoretically, and the results indicated that SERS enhancement was maximum at an optimum silver thickness of 45 nm on the sharply spiked SGNS. The proposed high-throughput SERS platform exhibited ultrahigh sensitivity and excellent enhancement uniformity for a model analyte, i.e., crystal violet. Moreover, the SERS-sensing platform demonstrated good sensitivity of FNT spiked in human urine samples with two differential linear response ranges of 2 to 0.2 µg/mL and 0.1 µg/mL to 100 pg/mL, respectively,  with a detection limit as low as 10.02 pg/mL. The spiked human urine samples show satisfactory recovery values from 92.5 to 102% with relative standard deviations (RSD) of less than 10%. In summary, the high-throughput performance of the proposed microplate-based SERS platform demonstrated great potential for rapid low-cost SERS-based sensing applications.

Enhancing the electrochemical activity of zinc cobalt sulfide via heterojunction with MoS2 metal phase for overall water splitting

The integration of diverse components into a single heterostructure represents an innovative approach that boosts the quantity and variety of active centers, thereby enhancing the catalytic activity for both hydrogen evolution reactions (HER) and oxygen evolution reactions (OER) in the water splitting process. In this study, a novel, hierarchically porous one-dimensional nanowire array comprising zinc cobalt sulfide and molybdenum disulfide (MoS2@Zn0.76Co0.24S) was successfully synthesized on a Ni foam substrate using an efficient and straightforward hydrothermal synthesis strategy. The incorporation of the metallic phase of molybdenum disulfide elevates the electronic conductivity of MoS2@Zn0.76Co0.24S, resulting in impressively low overpotentials. At 20, 50, and 100 mA cm-2, the overpotentials for oxygen evolution reaction (OER) are merely 90 mV, 170 mV, and 240 mV, respectively. Similarly, for hydrogen evolution reaction (HER), the overpotentials are 169 mV, 237 mV, and 301 mV at the same current densities in 1.0 M potassium hydroxide solution. The utilization of the MoS2@Zn0.76Co0.24S /NF electrolyzer demonstrates its exceptional performance as a catalyst in alkaline electrolyzers. Operating at a mere 1.45 V and 10 mA cm-2, it showcases outstanding efficiency. Achieving a current density of 405 mA cm-2, the system generates hydrogen at a rate of 3.1 mL/min with a purity of 99.997%, achieving an impressive cell efficiency of 68.28% and a voltage of 1.85 V. Furthermore, the MoS2@Zn0.76Co0.24S /NF hybrid exhibits seamless integration with solar cells, establishing a photovoltaic electrochemical system for comprehensive water splitting. This wireless assembly harnesses the excellent performance of the hybrid nanowire, offering a promising solution for efficient, durable, and cost-effective bifunctional electrocatalysts in the realm of renewable energy.

Visible-light-driven peroxymonosulfate activation by robust TiO2-base nanoparticles for efficient removal of sulfamethoxazole

In this study, a novel bimetallic Co-Mo-TiO2 nanomaterial was fabricated through a simple two-step method, and applied as photocatalyst to activate peroxymonosulfate (PMS) with high efficiency for sulfamethoxazole (SMX) removal under visible light. Nearly 100% of SMX was degraded within 30 min in Vis/Co-Mo-TiO2/PMS system, and its kinetic reaction rate constant (0.099 min-1) was 24.8 times higher compare with the Vis/TiO2/PMS system (0.014 min-1). Moreover, the quenching experiments and the electronic spin resonance analysis results confirmed that both 1O2 and SO4•- were the dominant active species in the optimal system, and the redox cycles of Co3+/Co2+ and Mo6+/Mo4+ promoted the generation of the radicals during the PMS activation process. Additionally, the Vis/Co-Mo-TiO2/PMS system exhibited a wide working pH range, superior catalytic performance toward different pollutants and excellent stability with 92.8% SMX removal capacity retention after three consecutive cycles. The result of density functional theory (DFT) suggested that Co-Mo-TiO2 exhibited a high affinity for PMS adsorption, as indicated by the length O-O bond from PMS and the Eads of the catalysts. Finally, the possible degradation pathway of SMX in optimal system was proposed through intermediate identification and DFT calculation, and a toxicity assessment of the by-products was also conducted.

Facile fabrication of Fe/Zr binary MOFs for arsenic removal in water: High capacity, fast kinetics and good reusability

A water-stable bimetallic Fe/Zr metal-organic framework [UiO-66(Fe/Zr)] for exceptional decontamination of arsenic in water was fabricated through a facile one-step strategy. The batch adsorption experiments revealed the excellent performances with ultrafast adsorption kinetics due to the synergistic effects of two functional centers and large surface area (498.33 m²/g). The absorption capacity of UiO-66(Fe/Zr) for arsenate [As(V)] and arsenite [As(III)] reached as high as 204.1 mg/g and 101.7 mg/g, respectively. Langmuir model was suitable to describe the adsorption behaviors of arsenic on UiO-66(Fe/Zr). The fast kinetics (adsorption equilibrium in 30 min, 10 mg/L As) and pseudo-second-order model implied the strong chemisorption between arsenic ions and UiO-66(Fe/Zr), which was further confirmed by DFT theoretical calculations. The results of FT-IR, XPS analysis and TCLP test demonstrated that arsenic was immobilized on the surface of UiO-66(Fe/Zr) through Fe/Zr-O-As bonds, and the leaching rates of the adsorbed As(III) and As(V) from the spent adsorbent were only 5.6% and 1.4%, respectively. UiO-66(Fe/Zr) can be regenerated for five cycles without obvious removal efficiency decrease. The original arsenic (1.0 mg/L) in lake and tap water was effectively removed in 2.0 hr [99.0% of As(III) and 99.8% of As(V)]. The bimetallic UiO-66(Fe/Zr) has great potentials in water deep purification of arsenic with fast kinetics and high capacity.

Ultra-trace SERS detection of cocaine and heroin using bimetallic gold-silver nanostars (BGNS-Ag)

A rapid, in-field, and reliable method for the detection of illegal drugs of abuse in biological fluids without any sample pretreatment would potentially be helpful for law enforcement, drug control officials, and public healthcare. In this study, we presented a cost-effective and highly reproducible solution-based surface-enhanced Raman scattering (SERS) platform utilizing a portable Raman instrument for fast sensitive SERS detection of illegal drugs, such as cocaine, and heroin in human urine without any sample preprocessing. The SERS platform was constructed for the first time by combining the superior SERS enhancement properties of bimetallic silver-coated gold nanostars (BGNS-Ag) and the advantages of suitable alkaline metal salts such as NaI for SERS signal amplification. The effects of the silver thickness of BGNS-Ag and alkaline salts on the SERS performance were investigated in detail; we observed that the maximum SERS enhancement was obtained for BGNS-Ag with the maximum silver thickness (54 ± 5 nm) in presence of NaI salt. Our SERS platform shows ultra-high sensitivity of cocaine and heroin with a limit of detection (LOD) as low as 10 pg/mL for cocaine and 100 pg/mL for heroin, which was 100 times lower than that of the traditional silver nanoparticle-based illegal drug detection. As a demonstration, the platform was further applied to detect cocaine and heroin spiked in human urine without any sample preprocessing achieving a LOD of 100 pg/mL for cocaine and 1 ng/mL for heroin. Overall, our SERS detection platform shows potential for rapid, onsite, ultra-low-cost portable applications for trace detection of illegal drugs and biomarkers.

Sericin mediated gold/silver bimetallic nanoparticles and exploration of its multi-therapeutic efficiency and photocatalytic degradation potential

The current investigation aimed at bimetallic gold-silver nanoparticles (Au/Ag NPs), here called BM-GS NPs, synthesis using sericin protein as the reducing agent in an easy, cost-effective, and sustainable way. The obtained BM-GS NPs were characterized by UV-Visible spectroscopy, Transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDS), atomic force microscopy (AFM), Dynamic light scattering (DLS) and Zeta potential, X-ray Powder Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and Thermogravimetric analysis followed by evaluation of its multitherapeutic and photocatalytic degradation potentials. The TEM analysis revealed its spherical nature and the EDS result displayed the presence of both Ag and Au elements, confirming the synthesis of BM-GS NPs. The XRD pattern verified the crystalline nature of the nanoparticles (NPs). The DLS analysis showed an average size of 86.08 d nm and the zeta potential showed a highly negative value (-26.3 mV) which specifies that the generated bimetallic NPs are stable. The BM-GS NPs exhibited positive wound healing potential (with 63.38% of wound closure rate at 25 μg/ml, as compared to 54.42% by the untreated control) with very negligible toxicity effect on the cell viability of the normal keratinocyte cells. It also demonstrated promising antioxidant properties with 65.00%, 69.23%, and 63.03% activity at 100 μg/ml concentration for ABTS (2, 2-azinobis) (3-ethylbenzothiazoline-6-sulfonic acid)), DPPH (1, 1 diphenyl-2-picrylhydrazyl) and SOD (superoxide dismutase enzyme) assays respectively, antidiabetic potential (with a significantly high α-glucosidase inhibition potential of 99.69% at 10μg/ml concentration and 62.11% of α-amylase enzyme inhibition at 100 μg/ml concentration) and moderate tyrosinase inhibitory potential (with 17.09% at 100 μg/ml concentration). Besides, it displayed reasonable antibacterial potential with the diameter of zone of inhibition ranging between 10.89 and 12.39 mm. Further, its antibacterial mode of action reveals that its effects could be due to being very smaller, the NPs could have penetrated inside the cellular membrane thereby causing rupture and damage to the interior materials leading to cellular lysis. The photocatalytic evaluation showed that synthesized BM-GS NPs have the efficiency of degrading methylene blue dye by 34.70% within 3 h of treatment. The above findings revealed the multi-therapeutic efficacy of the sericin globular protein-mediated BM-GS NPs and its potential future applications in the cosmetics and food sector and environmental contamination management industries.

Superparamagnetic MnFe alloy composite derived from cross-bindered of chitosan/rice husk waste/iron aluminate spinel hercynite for rapid catalytic detoxification of aflatoxin B1: Structure, performance and synergistic mechanism

The contamination of foodstuffs with aflatoxins B1 (AFB1) as carcinogen/mutagens toxin produced by Aspergillus fungi that are a major threat to the economy, safe food supply, and human health. To, we present a facile wet-impregnation and co-participation strategies for the construction of a novel superparamagnetic MnFe biocomposite (MF@CRHHT), in which dual metal oxides MnFe were anchored in/on agricultural/forestry residues (chitosan/rice husk waste/hercynite hybrid nanoparticles) and applied for rapid AFB1 detoxification by destroying in a non-thermal/microbial way. Structure, and morphology were comprehensively characterized by various spectroscopic analyses. The AFB1 removal in PMS/MF@CRHHT system followed pseudo-first-order kinetics, and exhibited excellent efficiency (99.3 % in 20 min and 83.1 % in 5.0 min) over a broad pH range (5.0-10.0). Importantly, relationship between high efficiency and physical-chemical properties, and mechanistic insight reveals that the synergistic effect could be related to the formation MnFe bond in MF@CRHHT and then mutual electron transfer between them to enhanced electron density and generate reactive oxygen species. An AFB1 decontamination pathway proposed was based on the free radical quenching experiments and analysis of the degradation intermediates. Thus, the MF@CRHHT can be applied as an efficient, cost-effective, recoverable, environment-friendly and highly efficient biomass-based activator for remediate pollution.

Synergistic effect of bimetal in isoreticular Zn-Cu-1,3,5-benzenetricarboxylate on room temperature gaseous sulfides removal

Isoreticular bimetal M-Cu-BTC has considerable potential in improving the sulfides removal performance of Cu-BTC. Herein, three transition metals, namely, Zn²⁺, Ni²⁺ and Co²⁺, were assessed to fabricate M-Cu-BTC, a desirable isoreticular bimetal. Results demonstrated the feasibility of using Zn²⁺ to fabricate an isoreticular bimetallic Zn-Cu-BTC. The Zn²⁺ doping content of Zn-Cu-BTC was varied to investigate its influence on the hydrogen sulfide (H₂S) and methyl sulfide (CH₃SCH₃) removal performance of Cu-BTC. The experimental results indicated that the sulfides removal performance of Zn-Cu-BTC increased and then decreased with increasing Zn doping content. The highest H₂S and CH₃SCH₃ removal capacities of 84.3 and 93.9 mg S/g, respectively, were obtained when the Zn²⁺ doping content was 17%. The hybridisation of Zn and Cu in Zn-Cu-BTC induced a strong interaction between them. This interaction increased the binding energies of H₂S and CH₃SCH₃ towards the Cu and Zn adsorption sites while weakening the bond order between Zn and Cu. The weakened bond order made the Zn-Cu bonds easier to form metal sulfides during desulfurization process, thereby synergistically enhancing sulphide removal.

Controlling Selectivity in Plasmonic Catalysis: Switching Reaction Pathway from Hydrogenation to Homocoupling Under Visible-Light Irradiation

Plasmonic catalysis enables the use of light to accelerate molecular transformations. Its application to the control reaction selectivity is highly attractive but remains challenging. Here, we have found that the plasmonic properties in AgPd nanoparticles allowed different reaction pathways for tunable product formation under visible-light irradiation. By employing the hydrogenation of phenylacetylene as a model transformation, we demonstrate that visible-light irradiation can be employed to steer the reaction pathway from hydrogenation to homocoupling. Our data showed that the decrease in the concentration of H species at the surface due to plasmon-enhanced H₂ desorption led to the control in selectivity. These results provide important insights into the understanding of reaction selectivity with light, paving the way for the application of plasmonic catalysis to the synthesis of 1,3-diynes, and bringing the vision of light-driven transformations with target selectivity one step closer to reality.

Divergent CO2 Activation by Tuning the Lewis Acid in Iron-Based Bimetallic Systems

Bimetallic motifs mediate the selective activation and functionalization of CO₂ in metalloenzymes and some recent synthetic systems. In this work, we build on the nascent concept of bimetallic frustrated Lewis pairs (FLPs) to investigate the activation and reduction of CO₂ . Using the Fe⁰ fragment [(depe)₂ Fe] (depe=1,2-bis(diethylphosphino)ethane) as base, we modify the nature of the partner Lewis acid to accomplish a divergent and highly chemoselective reactivity towards CO₂ . [Au(PMe₂ Ar)]⁺ irreversibly dissociates CO₂ , Zn(C₆ F₅ )₂ and B(C₆ F₅ )₃ yield different CO₂ adducts stabilized by push-pull interactions, while Al(C₆ F₅ )₃ leads to a rare heterobimetallic C-O bond cleavage, and thus to contrasting reduced products after exposure to dihydrogen. Computational investigations provide a rationale for the divergent reactivity, while Energy Decomposition Analysis-Natural Orbital for Chemical Valence (EDA-NOCV) method substantiates the heterobimetallic bonding situation.

Carbon Nitride Photocatalysts with Integrated Oxidation and Reduction Atomic Active Centers for Improved CO2 Conversion

Single-atom active-site catalysts have attracted significant attention in the field of photocatalytic CO₂ conversion. However, designing active sites for CO₂ reduction and H₂ O oxidation simultaneously on a photocatalyst and combining the corresponding half-reaction in a photocatalytic system is still difficult. Here, we synthesized a bimetallic single-atom active-site photocatalyst with two compatible active centers of Mn and Co on carbon nitride (Mn₁ Co₁ /CN). Our experimental results and density functional theory calculations showed that the active center of Mn promotes H₂ O oxidation by accumulating photogenerated holes. In addition, the active center of Co promotes CO₂ activation by increasing the bond length and bond angle of CO₂ molecules. Benefiting from the synergistic effect of the atomic active centers, the synthesized Mn₁ Co₁ /CN exhibited a CO production rate of 47 μmol g^-1  h^-1 , which is significantly higher than that of the corresponding single-metal active-site photocatalyst.

Twinned-Au-tip-induced growth of plasmonic Au-Cu Janus nanojellyfish in upconversion luminescence enhancement

The metallic Janus nanoparticle is an emerging plasmonic nanostructure that has attracted attention in the fields of materials science and nanophotonics. The instability of the Cu nanostructure leads to very complex nucleation and growth kinetics, and synthesis of Cu Janus nanoparticle has challenges. Here, we report a new method for synthesis of Au-Cu Janus nanojellyfish (JNF) by using twinned tips of Au nanoflower (NF) as seeds. The twinned nanotip of the Au NF and the large lattice mismatch between Au and Cu can induce formation of twin defects during the growth process, resulting in asymmetric deposition of Cu atoms. The symmetry-breaking using different sizes of Au NF and Cu nanodomains within the Au-Cu JNF can controllably change the localized surface plasmon resonance (LSPR) modes. The asymmetric Au-Cu JNF can induce plasmon coupling between dipolar and multipolar modes, which leads to clear electric-field enhancement in the near-infrared region. An Au-Cu JNF with multiple LSPR modes was chosen to simultaneously match the excitation and emission bands of the lanthanide-doped upconversion nanoparticles (UCNPs). A 5000-fold enhancement of the upconversion luminescence was achieved by using single plasmonic Au-Cu JNF. The Au-Cu JNF can also provide a guide for new metallic Janus nanoparticles in the fields of plasmonic, photothermal conversion, and nanomotors.

Ni-MOL/In2Se3 heterostructure construction with mixed metal (Ti/Ni) for efficient photocatalytic tetracycline degradation

To investigate the mechanism of bimetallic 2-dimension (2D) catalyst existing in the current photocatalytic degradation process, the tetracycline (TC) degradation performance and mechanism by bimetallic 2D photocatalyst was studied extensively. Nickel metal-organic layer (Ni-MOL) and In₂Se₃, a typical 2D semiconductor photocatalyst, shows great potential for photocatalytic degradation of TC. Herein, an In₂Se₃ assisted Ni-MOL composite bimetallic photocatalyst was assembled, of which could obtain the degradation rate of 96.4% within 90 min for TC under visible light. Ni-MOL was the main active site for TC degradation by photo-induced holes which located at the Ni atom active site during the photocatalytic process. The role of In₂Se₃ and the element of Ti in Ni-MOL was to assist Ni-MOL by providing more photo-induced carriers and inhibiting carrier recombination. This work makes a contribution to the application of 2D bimetallic photocatalytic in TC degradation.

Determining degradation kinetics, byproducts and toxicity for the reductive treatment of Nitroguanidine (NQ) by magnesium-based bimetal Mg/Cu

Energetic-laden process water from industrial munition facilities can be treated by zero-valent metals (ZVMs) or zero-valent iron (ZVI) to remove residual energetics. This reduction-based treatment is significantly enhanced with the addition of a secondary catalytic metal (i.e. forming a bimetal reagent). The reagent is further enhanced by using a more reductive base metal, such as Mg. In this work, the reductive degradation of nitroguanidine (NQ) in aqueous solutions by Mg/Cu bimetal is investigated. Two initial pH conditions (unadjusted and pH 2.7) were studied. Under unadjusted initial pH conditions, 90% of NQ degraded within 30 min reaction time. After 150 min, NQ degradation generated a suite of products including guanidine (44%), cyanamide (31%), formamide (15%), aminoguanidine (AQ) (6%), urea (2%) and cyanoguanidine (0.03%), leading to 100.0% carbon closure when accounting for residual NQ. The experimentally-derived degradation reaction pathway consisted of two parallel reactions: nitroreduction led to formation of AQ with further degradation to urea, cyanamide and formamide, or reductive cleavage of the N-N bond led to guanidine formation. Toxicological assessments indicated only cyanamide and AQ were toxic to S. obliquus at certain concentrations. A lowered initial pH promoted AQ transformation to benign formamide, thus reducing toxicity and complexity of products.

Bimetallic FeNi nanoparticles immobilized by biomass-derived hierarchically porous carbon for efficient removal of Cr(VI) from aqueous solution

Nano zero-valent iron (nZVI) is an effective material for Cr(VI) treatment, however excessive agglomeration and surface oxidation limit its application. Herein, straw derived hierarchically porous carbon supported FeNi bimetallic nanoparticles (FeNi@HPC) was prepared for effective removal of Cr(VI) from water. FeNi nanoparticles were successfully loaded onto HPC with good dispersibility, and HPC caused an increase in specific surface area of FeNi nanoparticles. FeNi@HPC exhibited a significantly enhanced removal efficiency for Cr(VI) in comparison to Fe@HPC and FeNi NPs. The Ni doping content was further optimized, and the best Ni content in bimetallic NPs was estimated as 10 wt%. The conditions optimal for the activity of FeNi@HPC were assessed, and the highest removal efficiency equivalent to 30 mg L^-1 of Cr(VI) was achieved at pH= 4.0 in 360 min with a dosage of 0.5 g L^-1. Higher temperatures favored the removal of Cr(VI) and FeNi@HPC manifested the lowest activation energy as compared to Fe@HPC and FeNi NPs. The action mechanisms of FeNi@HPC presumably involved electron transfer from Fe⁰, Fe²⁺and atomic hydrogen. This work not only provide a cost-effective and available HPC material to stabilize nZVI but also revealed that using FeNi@HPC is a promising approach for the remediation of water pollution.

Promotional effect of ZrO2 and WO3 on bimetallic Pt-Pd diesel oxidation catalyst

Diesel oxidation catalysts Pt-Pd-(y)ZrO₂-(z)WO₃/CeZrO_x-Al₂O₃ with total Pt & Pd loading of only 0.68 wt.% were prepared and investigated for oxidation activity and stability of CO, C₃H₆, and NO. Introduction of ZrO₂ greatly improved low-temperature activities and retained stability especially for CO and C₃H₆ oxidation after treated at 800 °C. With the optimal loading amount of 6 wt% ZrO₂, 2 wt% WO₃ was introduced to the system and showed higher activity. Reaction temperature for 50% CO and C₃H₆ conversion declined to 160 and 181 °C, and the maximal NO conversion increased to 50%. By using XRD, TEM, CO chemisorption, XPS, and H₂-TPR analysis, it was found that ZrO₂ could inhibit aggregation of Pt and Pd, improve metal dispersion, and increase surface-chemisorbed oxygen after high-temperature treatment, accounting for promoted performance. Also, there were more reducible oxide species in ZrO₂-doped catalysts. ZrO₂ could induce reduction of noble metal oxides and surface ceria by weakening Pt-O-Ce interaction, which increased the ability to dissociate H₂ and spillover effect of dissociated hydrogen to ceria. Doping WO₃ increased metal dispersion of fresh samples and brought more Pt⁰ species that were active sites for oxidation reactions. Thus, ZrO₂ and WO₃ could be effective additives for oxidation catalysts to synergistically improve their activities and thermal stability.

Hetero-metallic metal-organic frameworks for room-temperature NO2 sensing

Metal-organic frameworks (MOFs) with exceptional features such as high structural diversity and surface area as well as controlled pore size has been considered a promising candidate for developing room temperature highly-sensitive gas sensors. In comparison, the hetero-metallic MOFs with redox-active open-metal sites and mixed metal nodes may create peculiar surface properties and synergetic effects for enhanced gas sensing performances. In this work, the Fe atoms in the Fe₃ (Porous coordination network) PCN-250 MOFs are partially replaced by transition metal Co, Mn, and Zn through a facile hydrothermal approach, leading to the formation of hetero-metallic MOFs (Fe₂^IIIM^II, M = Co, Mn, and Zn). While the PCN-250 framework is maintained, the morphological and electronic band structural properties are manipulated upon the partial metal replacement of Fe. More importantly, the room temperature NO₂ sensing performances are significantly varied, in which Fe₂Mn PCN-250 demonstrates the largest response magnitude for ppb-level NO₂ gas compared to those of pure Fe₃ PCN-250 and other hetero-metallic MOF structures mainly attributed to the highest binding energy of NO₂ gas. This work demonstrates the strong potential of hetero-metallic MOFs with carefully engineered substituted metal clusters for power-saving and high-performance gas sensing applications.

Highly efficient nano-Fe/Cu bimetal-loaded mesoporous silica Fe/Cu-MCM-41 for the removal of Cr(VI): Kinetics, mechanism and performance

Zero valent iron (Fe⁰) can reduce Cr(VI) in water, where Fe⁰ and Fe(Ⅱ) are possible electron donors, but passivation and aggregation easily occur to Fe⁰. To improve the performance of Fe⁰, a new hybridization strategy of Fe/Cu bimetal and silica-based mesoporous molecular sieve MCM-41 for the removal of Cr(VI) from water has been proposed. The results show that the two-dimensional mesoporous structure of MCM-41 can provide skeleton support for Fe⁰, improve the mass transfer rate, and overcome the aggregation bottleneck of Fe⁰. The Cr(VI) removal rate reached 98.98% (pH = 2) after 40 min. The analytical results revealed Cr(VI) removal process: Cr(VI) adsorbed onto Fe/Cu-MCM-41 by electrostatic attraction and other molecular inter-atomic forces. The second metal, Cu, can inhibit the passivation of Fe⁰ and promote Fe(Ⅱ)through the formation of Fe/Cu battery, thereby promoting the electron transfer. The resulting Cr(Ⅲ) is precipitated as FeCr₂O₄ and Cr_xFe_1-x(OH)₃.

Study on swelling and drug releasing behaviors of ibuprofen-loaded bimetallic alginate aerogel beads with pH-responsive performance

Bimetallic alginate aerogel beads were prepared by ionotropic gelation method with Ca²⁺-Ba²⁺ bimetallic solution and ibuprofen was loaded as a model drug. The swelling and drug releasing behaviors of the beads, especially the influence of barium, were investigated in artificial gastric and intestinal fluids. The results showed that these beads presented higher encapsulation efficiency due to the special structure of aerogel, and barium was beneficial for the more stable structure and drug releasing behavior. The lower swelling capacity of bimetallic beads was observed than monometallic beads. A rapid high-level releasing of ibuprofen was achieved in artificial intestinal fluid, which was up to 96.9% within 1 h, while ibuprofen releasing was avoided in artificial gastric fluid effectively. The drug releasing mechanism of these beads was explored in detail. In the bimetallic crosslinking system, Ba²⁺ presented a special effect on alginate beads with more sensitive pH response performance. Thus, these beads had more widely potential as a site-specific delivery system, especially for intestinal therapy.

Development of Multi-concentration Cu:Ag Bimetallic Nanoparticles as a Promising Bactericidal for Antibiotic-Resistant Bacteria as Evaluated with Molecular Docking Study

The present study is concerned with evaluating the influence of various concentrations of Ag within Cu:Ag bimetallic nanoparticles developed for use as a promising anti-bacterial agent against antibiotic-resistant bacteria. Here, Cu:Ag bimetallic nanoparticles with various concentration ratios (2.5, 5.0, 7.5, and 10 wt%) of Ag in fixed amount of Cu labeled as 1:0.025, 1:0.050, 1:0.075, and 1:0.1 were synthesized using co-precipitation method with ammonium hydroxide and deionized water as solvent, polyvinyl pyrrolidone as a capping agent, and sodium borohydride and ascorbic acid as reducing agents. These formulated products were characterized through a variety of techniques. XRD confirmed phase purity and detected the presence of distinct fcc structures belonging to Cu and Ag phases. FTIR spectroscopy confirmed the presence of vibrational modes corresponding to various functional groups and recorded characteristic peak emanating from the bimetallic. UV-visible spectroscopy revealed reduction in band gap with increasing Ag content. SEM and HR-TEM micrographs revealed spherical morphology of Ag-doped Cu bimetallic with small and large scale agglomerations. The samples exhibited varying dimensions and interlayer spacing. Bactericidal action of synthesized Cu:Ag bimetallic NPs depicted statistically significant (P < 0.05) inhibition zones recorded for various concentrations of Ag dopant against Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), and Acinetobacter baumannii (A. baumannii) ranging from (0.85-2.8 mm), (0.55-1.95 mm) and (0.65-1.85 mm), respectively. Broadly, Cu:Ag bimetallic NPs were found to be more potent against gram-positive compared with gram-negative. Molecular docking study of Ag-Cu bimetallic NPs was performed against β-lactamase which is a key enzyme of cell wall biosynthetic pathway from both S. aureus (Binding score: - 4.981 kcal/mol) and A. bauminnii (Binding score: - 4.013 kcal/mol). Similarly, binding interaction analysis against FabI belonging to fatty acid biosynthetic pathway from A. bauminnii (Binding score: - 3.385 kcal/mol) and S. aureus (Binding score: - 3.012 kcal/mol) along with FabH from E. coli (Binding score: - 4.372 kcal/mol) was undertaken. These theoretical computations indicate Cu-Ag bimetallic NPs as possible inhibitor of selected enzymes. It is suggested that exploring in vitro inhibition potential of these materials may open new avenues for antibiotic discovery.

Dynamic Surface Reconstruction of Single-Atom Bimetallic Alloy under Operando Electrochemical Conditions

The atomic-level understanding of the dynamic evolution of the surface structure of bimetallic nanoparticles under industrially relevant operando conditions provides a key guide for improving their catalytic performance. Here, we exploit operando X-ray absorption fine structure spectroscopy to determine the dynamic surface reconstruction of Cu/Au bimetallic alloy where single-atom Cu was embedded on the Au nanoparticle, under electrocatalytic conditions. We identify the migration of isolated Cu atoms from the vertex position of the Au nanoparticle to the stable (100) plane of the Au first atom layer, when the reduction potential is applied. Density functional theory calculations reveal that the surface atom migration would significantly modulate the Au electronic structure, thus serving as the real active site for the catalytic performance. These findings demonstrate the real structural change under electrochemical conditions and provide guidance for the rational design of high-activity bimetallic nanocatalysts.

Structure-activity relationship of diameter controlled Ag@Cu nanoparticles in broad-spectrum antibacterial mechanism

Current outbreaks associated with drug-resistant clinical strains are demanding for the development of broad-spectrum antibacterial agents. The bactericidal materials should be eco-friendly, economical and effective to suppress bacterial growth. Thus, in this work, diameter controlled spherical Cu_core-Ag_shell nanoparticles (Ag@CuNPs) with diameter ranging from 70 to 100 nm by one-step co-reduction approach were designed and synthesized. The Ag@CuNPs were homogenous, stable, and positively charged. The 70 nm Ag@CuNPs showed a consistent and regular Ag shielding. We observed the 100 nm Ag@CuNPs achieved symmetrical doped Ag clusters on the Cu core surface. We used Gram-positive and Gram-negative models strains to test the wide-spectrum antibacterial activity. The Ag@CuNPs showed detrimental microbial viability in a dose-dependent manner; however, 70 nm Ag@CuNPs were superior to those of 100 nm Ag@CuNPs. Initially, Ag@CuNPs attached and translocated the membrane surface resulting in bacterial eradication. Our analyses exhibited that antibacterial mechanism was not governed by the bacterial genre, nonetheless, by cell type, morphology, growing ability and the NPs uptake capability. The Ag@CuNPs were highly tolerated by human fibroblasts, mainly by the use of starch as glucosidic capper and stabilizer, suggesting optimal biocompatibility and activity. The Ag@CuNPs open up a novel platform to study the potential action of bimetallic nanoparticles and their molecular role for biomedical, clinical, hospital and industrial-chemical applications.

Nanofibrillar cellulose/Au@Ag nanoparticle nanocomposite as a SERS substrate for detection of paraquat and thiram in lettuce

A nanocomposite based on nanofibrillar cellulose (NFC) coated with gold-silver (core-shell) nanoparticles (Au@Ag NPs) was developed as a novel surface-enhanced Raman spectroscopy (SERS) substrate. SERS performance of NFC/Au@Ag NP nanocomposite was tested by 4-mercaptobenzoic acid. The cellulose nanofibril network was a suitable platform that allowed Au@Ag NPs to be evenly distributed and stabilized over the substrate, providing more SERS hotspots for the measurement. Two pesticides, thiram and paraquat, were successfully detected either individually or as a mixture in lettuce by SERS coupled with the nanocomposite. Strong Raman scattering signals for both thiram and paraquat were obtained within a Raman shift range of 400-2000 cm-1 and a Raman intensity ~ 8 times higher than those acquired by NFC/Au NP nanocomposite. Characteristic peaks were clearly observable in all SERS spectra even at a low concentration of 10 μg/L of pesticides. Limit of detection values of 71 and 46 μg/L were obtained for thiram and paraquat, respectively. Satisfactory SERS performance, reproducibility, and sensitivity of NFC/Au@Ag NP nanocomposite validate its applicability for real-world analysis to monitor pesticides and other contaminants in complex food matrices within a short acquisition time. Graphical abstract.

Highly dispersed copper cobalt oxide nanoclusters decorated carbon nitride with efficient heterogeneous interfaces for enhanced H2 evolution

Photocatalytic reaction refers to a sophisticated heterogeneous catalyzing process. Exploring the interfacial reaction of catalysts will provide insights into efficient artificial photosynthetic system and promote its design. In this study, highly dispersed bimetallic CuCo₂O₄ nanoclusters decorated g-C₃N₄ heterojunction photocatalyst was produced by in-situ deposition of 0D CuCo₂O₄ spinel on the 2D g-C₃N₄ surface. Compared with CuO or Co₃O₄ modified g-C₃N₄, the optimal composite exhibits a significantly higher H₂ evolution rate of 4187.6 μmol∙g_cat^-1∙h^-1 with an apparent quantum yield (AQY) of 4.57% under the irradiation of monochromatic light (400 ± 7.5 nm) in the absence of noble metal. As suggested from the results of the photoelectrochemistry characterizations and NH₃-temperature programmed desorption (NH₃-TPD) analysis, CuCo₂O₄/g-C₃N₄ exhibited faster HER kinetics and considerable surface acidity sites, and it facilitated triethanolamine (TEOA) chemisorption and H₂ evolution, further highlighting the merits of such mixed-metal compounds. Moreover, the transfer pathway of charge carriers between CuCo₂O₄ and g-C₃N₄ heterogeneous interface was demonstrated by photo-degradation of RhB and selective photo-deposition Pt nanoparticles.

Improved Morphological and Localized Surface Plasmon Resonance (LSPR) Properties of Fully Alloyed Bimetallic AgPt and Monometallic Pt NPs Via the One-Step Solid-State Dewetting (SSD) of the Ag/Pt Bilayers

Multi-metallic alloy nanoparticles (NPs) can offer a promising route for the integration of multi-functional elements by the adaptation of advantageous individual NP properties and thus can exhibit the multi-functional dynamic properties arisen from the electronic heterogeneity as well as configurational diversity. The integration of Pt-based metallic alloy NPs are imperative in the catalytic, sensing, and energy applications; however, it usually suffers from the difficulty in the fabrication of morphologically well-structured and elementally well-alloyed NPs, which yields poor plasmonic responses. In this work, the improved morphological and localized surface plasmon resonance (LSPR) properties of fully alloyed bimetallic AgPt and monometallic Pt NPs are demonstrated on sapphire (0001) via the one-step solid-state dewetting (SSD) of the Ag/Pt bilayers. In a sharp contrast to the previous studies of pure Pt NPs, the surface morphology of the resulting AgPt and Pt NPs in this work are significantly improved such that they possess larger size, increased interparticle gaps, and improved uniformity. The intermixing of Ag and Pt atoms, AgPt alloy formation, and concurrent sublimation of Ag atoms plays the major roles in the fabrication of bimetallic AgPt and monometallic Pt NPs along with the enhanced global diffusion and energy minimization of NP system. The fabricated AgPt and Pt NPs show much-enhanced LSPR responses as compared to the pure Pt NPs in the previous studies, and the excitation of dipolar, quadrupolar, multipolar and higher-order resonance modes is realized depending upon the size, configuration, and elemental compositions. The LSPR peaks demonstrate drastic alteration along with the evolution of AgPt and Pt NPs, i.e., the resonance peaks are shifted and enhanced by the variation of size and Ag content.

A sensitive electrochemical sensor for bisphenol A on the basis of the AuPd incorporated carboxylic multi-walled carbon nanotubes

A sensitive electrochemical sensor for BPA based on the AuPd incorporated carboxylic multi-walled carbon nanotubes (MWCNT) with synergetic amplified current signal was developed, where MWCNT was used as supporter to improve electron transport and poly (diallyldimethylammonium chloride) (PDDA) was used as dispersant for MWCNT and overcome the intrinsic van der Waals interactions between MWCNT and further increase metal NPs loading. The prepared MWCNT-PDDA-AuPd showed enhanced electrocatalytic performance toward BPA, which is better than those of homologous monometallic counterparts and MWCNT-PDDA though the content of AuPd is really low. The peak currents of BPA increased with BPA concentration in linear range of 0.18-18 μM and the detection limit of 60 nM. The sensor showed high sensitivity, good stability, repeatability and can be used to detect BPA in milk and water samples with good performance, which demonstrate that MWCNTs-PDDA-AuPd nanocomposite may be an attractive material in applications of environmental and food analysis.

Synthesis, characterization and biological activities of monometallic and bimetallic nanoparticles using Mirabilis jalapa leaf extract

•

Synthesis of monometallic ZnO and Ag NPs and bimetallic ZnO/Ag NPs has been performed.

•

Leaves extract of Mirabilis jalapa Linn is used for synthesis of NPs.

•

19.3 - 67.4 nm bimetallic, and 12.9–32.8 nm monometallic NPs were produced.

•

Both nanoparticles demonstrate free radical scavenging, total antioxidant, reducing power potentials.

•

Bimetallic nanoparticles displayed astonishing antibacterial and antileishmanial properties.

Monometallic ZnO and Ag nanoparticles (NPs) and bimetallic ZnO/Ag NPs were synthesized using leaves extract of Mirabilis jalapa. XRD analysis confirmed the crystalline nature of NPs with size range from 19.3 to 67.4 nm for bimetallic, and 12.9 and 32.8 nm for monometallic NPs. SEM images reveal varying shapes of the monometallic (needle like and spherical for ZnO and Ag, respectively) and bimetallic (plates, sheets, and spherical) NPs depending upon concentration of salts used. Biological characterization reveals that both mono and bi metallic nanoparticles demonstrate free radical scavenging, total antioxidant, and reducing power potentials. Phenolic and flavonoid like properties of NPs were also observed might be due to presence of different functional groups on the particles surface. Bimetallic NPs displayed astonishing antibacterial (up to 25 mm zone of inhibition) and antileishmanial properties. The results suggest that bimetallic ZnO/Ag nanoparticles hold greater potential then monometallic against bacteria and Leishmania. Other biomedical applications also varied depending upon concentration of precursors. Furthermore, ratio of salt concentrations used for synthesis of bimetallic NPs affect morphological and biochemical characteristics of NPs.

Synthesis and SERS activity of super-multibranched AuAg nanostructure via silver coating-induced aggregation of nanostars

The super-multibranched AuAg bimetallic nanostructures are synthesized due to the aggregation of Au nanostars in the process of silver coating. The super-multibranched bimetallic nanostructures with different silver coating thickness are obtained by changing the concentration of silver nitrate and ascorbic acid. It has been found that the formation of these nanostructures is due to the stacking of several nanostars during the process of silver coating. By comparing the silver coating process of gold nanostars with different branch lengths, we found that the nanostars with longish branches are easy to aggregate and form the super-multibranched nanostructures in the process of silver coating. In the AuAg bimetallic nanostructures, the silver layer is mainly covered on the surface of the cores and the thickness increases with the increasing of the AgNO₃, which leads to the change of the surface-enhanced Raman scattering (SERS) activity. It has been found that the SERS activity is stronger when the silver layer is thin and the Au branches are still exposed to the outside of the Ag shell. The sample with the strongest SERS activity has been used to detect thiram with different concentrations. The Raman intensity increases linearly with the logarithmic concentration of thiram ranging from 10^-3 to 10^-7 M with a detection limit of 6.3 × 10^-7 M. These experimental results show that the super-multibranched bimetallic nanostructures have a broad application prospect in molecular detection and biologic sensing based on SERS.

Bimetallic Electrocatalysts for CO2 Reduction

The increasing concentration of CO₂ in the atmosphere has caused various environmental issues. Utilizing CO₂ as the carbon feedstock to replace traditional fossil sources in commodity chemical production is a potential solution to reduce CO₂ emissions. Electrochemical reduction of CO₂ has attracted much attention because it not only converts CO₂ into a variety of useful chemicals under mild reaction conditions, but also can be powered by renewable electricity at remote locations. From this review article, we summarize recent literature on the topic of bimetallic electrocatalysts for CO₂ reduction. Both selectivity and activity of bimetallic catalysts strongly depend on their compositions and surface structures. Tuning the properties of a bimetallic catalyst could result in a wide range of products, including carbon monoxide, hydrocarbons, carboxylate and liquid oxygenates. By reviewing recent research efforts in the field of bimetallic electrocatalysts for CO₂ reduction, we aim to provide the community with a timely overview of the current status of bimetallic CO₂ electrocatalysts and to stimulate new ideas to design better catalysts for more efficient CO₂ electrolysis processes.

Bimetallic titanocene-gold phosphane complexes inhibit invasion, metastasis, and angiogenesis-associated signaling molecules in renal cancer

Following promising recent in vitro and in vivo studies of the anticancer efficacies of heterometallic titanocene-gold chemotherapeutic candidates against renal cancer, we report here on the synthesis, characterization, stability studies and biological evaluation of a new titanocene complex containing a gold-triethylphosphane fragment [(η-C₅H₅)₂TiMe(μ-mba)Au(PEt₃)] (4) Titanofin. The compound is more stable in physiological fluid than those previously reported, and it is highly cytotoxic against a line of human clear cell renal carcinoma. We describe here preliminary mechanistic data for this compound and previously reported [(η-C₅H₅)₂TiMe(μ-mba)Au(PPh₃)] (2) Titanocref which displayed remarkable activity in an in vivo mouse model. Mechanistic studies were carried out in the human clear cell renal carcinoma Caki-1 line for the bimetallic compounds [(η-C₅H₅)₂TiMe(μ-mba)Au(PR₃)] (PR₃ = PPh₃2 Titanocref and PEt₃4 Titanofin), the two monometallic gold derivatives [Au(Hmba)(PR₃)] (PR₃ = PPh₃1 cref; PEt₃3 fin), titanocene dichloride and Auranofin as controls. These studies indicate that bimetallic compounds Titanocref (2) and Titanofin (4) are more cytotoxic than gold monometallic derivatives (1 and 3) and significantly more cytotoxic than titanocene dichloride while being quite selective. Titanocref (2) and Titanofin (4) inhibit migration, invasion, and angiogenic assembly along with molecular markers associated with these processes such as prometastatic IL(s), MMP(s), TNF-α, and proangiogenic VEGF, FGF-basic. The bimetallic compounds also strongly inhibit the mitochondrial protein TrxR often overexpressed in cancer cells evading apoptosis and also inhibit FOXC2, PECAM-1, and HIF-1α whose overexpression is linked to resistance to genotoxic chemotherapy. In summary, bimetallic titanocene-gold phosphane complexes (Titanocref 2 and Titanofin 4) are very promising candidates for further preclinical evaluations for the treatment of renal cancer.

A heterometallic ruthenium-gold complex displays antiproliferative, antimigratory, and antiangiogenic properties and inhibits metastasis and angiogenesis-associated proteases in renal cancer

Heterobimetallic compounds are designed to harness chemotherapeutic traits of distinct metal species into a single molecule. The ruthenium-gold (Ru-Au) family of compounds based on Au-N-heterocyclic carbene (NHC) fragments [Cl2(p-cymene)Ru(μ-dppm)Au(NHC)]ClO4 was conceived to combine the known antiproliferative and cytotoxic properties of Au-NHC-based compounds and the antimigratory, antimetastatic, and antiangiogenic characteristic of specific Ru-based compounds. Following recent studies of the anticancer efficacies of these Ru-Au-NHC complexes with promising potential as chemotherapeutics against colorectal, and renal cancers in vitro, we report here on the mechanism of a selected compound, [Cl2(p-cymene)Ru(μ-dppm)Au(IMes)]ClO4 (RANCE-1, 1). The studies were carried out in vitro using a human clear cell renal carcinoma cell line (Caki-1). These studies indicate that bimetallic compound RANCE-1 (1) is significantly more cytotoxic than the Ru (2) or Au (3) monometallic derivatives. RANCE-1 significantly inhibits migration, invasion, and angiogenesis, which are essential for metastasis. RANCE-1 was found to disturb pericellular proteolysis by inhibiting cathepsins, and the metalloproteases MMP and ADAM which play key roles in the etiopathogenesis of cancer. RANCE-1 also inhibits the mitochondrial protein TrxR that is often overexpressed in cancer cells and facilitates apoptosis evasion. We found that while auranofin perturbed migration and invasion to similar degrees as RANCE-1 (1) in Caki-1 renal cancer cells, RANCE-1 (1) inhibited antiangiogenic formation and VEGF expression. We found that auranofin and RANCE-1 (1) have distinct proteolytic profiles. In summary, RANCE-1 constitutes a very promising candidate for further preclinical evaluations in renal cancer.

Seedless synthesis of nanocomposites, optical properties, and effects of additives on their surface resonance plasmon bands

The work describes an easy seedless competitive chemical reduction method for the synthesis of Ag@Au/Ag bimetallic nanoparticles by mixing AgNO₃, HAuCl₄ and cysteine. Transmission electron microscope (TEM) images show that the large number of irregular, cross-linking, and aggregated Ag@Au/Ag are formed in a reaction mixture (HAuCl₄+AgNO₃+cysteine), whereas flower-like nanocomposites are obtained in presence of cetyltrimethylammonium bromide (CTAB), which acted as a shape-directing agent. Optical images reveal that the initially reaction proceeds through formation of purple color, which changes into dark brown color with the reaction time, indicating the formation of Ag@Au/Ag nanocomposites. The Ag⁺ has strong tendency to form complex with cysteine. Firstly, the reduction of Ag⁺ ions to Ag⁰ occurred by the HS group of the cysteine-Ag complex. Secondly, AuCl₄^- ions adsorbed on the positive surface of Ag⁰, which undergoes reduction by potential deposition, and leads to the formation of Ag@Au/Ag bimetallic nanoparticles. Inorganic electrolytes (NaCl, NaBr, NaNO₃ and Na₂SO₄) have significant impact on the stability and aggregation of Ag@Au/Ag nanocomposites.

Fabrication of bimetallic Ag/Fe immobilized on modified biochar for removal of carbon tetrachloride

As an effective conventional absorbent, biochar exhibited limited adsorption ability toward small hydrophobic molecules. To enhance the adsorption capacity, a novel adsorbent was prepared by immobilizing nanoscale zero-valent iron onto modified biochar (MB) and then the elemental silver was attached to the surface of iron (Ag/Fe/MB). It's noted that spherical Ag/Fe nanoparticles with diameter of 51nm were highly dispersed on the surface of MB. As the typical hydrophobic contaminant, carbon tetrachloride was selected for examining the removal efficiency of the adsorbent. The removal efficiencies of carbon tetrachloride by original biochar (OB), Ag/Fe, Ag/Fe/OB and Ag/Fe/MB were fully investigated. It's found that Ag/Fe/MB showed higher carbon tetrachloride removal efficiency, which is about 5.5 times higher than that of the OB sample due to utilizing the merits of high adsorption and reduction. Thermodynamic parameters revealed that the removal of carbon tetrachloride by Ag/Fe/MB was a spontaneous and exothermic process, which was affected by solution pH, initial carbon tetrachloride concentration and temperature. The novel Ag/Fe/MB composites provided a promising material for carbon tetrachloride removal from effluent.

Enhanced chromium (VI) removal using activated carbon modified by zero valent iron and silver bimetallic nanoparticles

Recently, adsorption process has been introduced as a favorable and effective technique for the removal of metal ions from aqueous solutions. In the present study, bimetallic nanoparticles consisting of zero valent iron and silver were loaded on the activated carbon powder for the preparation of a new adsorbent (PAC-Fe^o/Ag). The above adsorbent was characterized by using XRD, SEM and TEM techniqes. Experimental data were exploited for kinetic, equilibrium and thermodynamic evaluations related to the adsorption processes. The Cr(VI) adsorption process was found to be favorable at pH 3 and it reached equilibrium state within 60 min. The stirring rate did not have a significant effect on the adsorption efficiency. Furthermore, the monolayer adsorption capacity of Cr(VI) based on the Langmuir model was measured to be 100 mg/g. The experimental equilibrium data were fitted to the Freundlich adsorption and pseudo second-order models. According to the thermodynamic study, the adsorption process was spontaneous and endothermic in nature, indicating the adsorption capacity increases with increasing the temperature. The results also revealed that the synthesized composite can be potentially applied as a magnetic adsorbent to remove Cr(VI) contaminants from aqueous solutions.