1
|
Multiplex Digital Quantification of β-Lactamase Genes in Antibiotic-Resistant Bacteria by Counting Gold Nanoparticle Labels on Silicon Microchips. BIOSENSORS 2022; 12:bios12040226. [PMID: 35448287 PMCID: PMC9024738 DOI: 10.3390/bios12040226] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/21/2022] [Revised: 04/06/2022] [Accepted: 04/07/2022] [Indexed: 11/21/2022]
Abstract
Digital quantification based on counting of individual molecules is a promising approach for different biomedical applications due to its enhanced sensitivity. Here, we present a method for the digital detection of nucleic acids (DNA and RNA) on silicon microchips based on the counting of gold nanoparticles (GNPs) in DNA duplexes by scanning electron microscopy (SEM). Biotin-labeled DNA is hybridized with capture oligonucleotide probes immobilized on the microchips. Then biotin is revealed by a streptavidin–GNP conjugate followed by the detection of GNPs. Sharp images of each nanoparticle allow the visualization of hybridization results on a single-molecule level. The technique was shown to provide highly sensitive quantification of both short oligonucleotide and long double-strand DNA sequences up to 800 bp. The lowest limit of detection of 0.04 pM was determined for short 19-mer oligonucleotide. The method’s applicability was demonstrated for the multiplex quantification of several β-lactamase genes responsible for the development of bacterial resistance against β-lactam antibiotics. Determination of nucleic acids is effective for both specific DNA in lysates and mRNA in transcripts. The method is also characterized by high selectivity for single-nucleotide polymorphism discrimination. The proposed principle of digital quantification is a perspective for studying the mechanisms of bacterial antibiotic resistance and bacterial response to drugs.
Collapse
|
2
|
Calabretta MM, Lopreside A, Montali L, Zangheri M, Evangelisti L, D'Elia M, Michelini E. Portable light detectors for bioluminescence biosensing applications: A comprehensive review from the analytical chemist's perspective. Anal Chim Acta 2022; 1200:339583. [DOI: 10.1016/j.aca.2022.339583] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/02/2021] [Revised: 02/02/2022] [Accepted: 02/04/2022] [Indexed: 12/11/2022]
|
3
|
Lai Q, Chen W, Zhang Y, Liu Z. Application strategies of peptide nucleic acids toward electrochemical nucleic acid sensors. Analyst 2021; 146:5822-5835. [PMID: 34581324 DOI: 10.1039/d1an00765c] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Peptide nucleic acids (PNAs) have attracted tremendous interest in the fabrication of highly sensitive electrochemical nucleic acid biosensors due to their higher stability and increased sensitivity than common DNA probes. The neutral pseudopeptide backbone of PNAs not only makes the PNA/DNA duplexes more stable but also provides many opportunities to construct ultrasensitive nucleic acid sensors. This review presents the details of various protocols for the construction of PNA-based electrochemical nucleic acid sensors. The crucial factors, origin, and development of PNA, immobilization methods of PNA probes and signal generation mechanisms, are discussed. This review aims to provide a reference for ultrasensitive PNA electrochemical biosensor preparation.
Collapse
Affiliation(s)
- Qingteng Lai
- Hunan Key Laboratory of Super Microstructure and Ultrafast Process, School of Physics and Electronics, Central South University, Changsha 410083, China.
| | - Wei Chen
- Hunan Key Laboratory of Super Microstructure and Ultrafast Process, School of Physics and Electronics, Central South University, Changsha 410083, China. .,Department of Clinical Laboratory, Xiangya Hospital of Central South University, Changsha 410008, China
| | - Yanke Zhang
- Hunan Key Laboratory of Super Microstructure and Ultrafast Process, School of Physics and Electronics, Central South University, Changsha 410083, China.
| | - Zhengchun Liu
- Hunan Key Laboratory of Super Microstructure and Ultrafast Process, School of Physics and Electronics, Central South University, Changsha 410083, China.
| |
Collapse
|
4
|
Hosokawa K. Biomarker Analysis on a Power-free Microfluidic Chip Driven by Degassed Poly(dimethylsiloxane). ANAL SCI 2021; 37:399-406. [PMID: 33162420 DOI: 10.2116/analsci.20scr04] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
Point-of-care testing (POCT) of biomarkers, such as proteins and nucleic acids, is a hot topic in modern medical engineering toward the early diagnosis of various diseases including cancer. Although microfluidic chips show great promise as a new platform for POCT, external pumps and valves for driving those chips have hindered the realization of POCT on the chips. To eliminate the need for pumps and valves, a power-free microfluidic pumping method utilizing degassed poly(dimethylsiloxane) (PDMS) was invented in 2004. In this article, the working principle of the degas-driven power-free microfluidic chip is first described, and then applications of those chips to biomarker analysis are reviewed. The biomarker analysis on the chip was typically achieved with a small sample volume of ∼1 μL and a short analysis time of ∼20 min. For protein analysis, the sandwich immunoassay format was adopted. The limit of detection (LOD) was improved by three orders of magnitude by using laminar flow-assisted dendritic amplification (LFDA), which was a newly devised amplification method specialized for microfluidic chips. For analysis of nucleic acids such as DNA and microRNA, the sandwich hybridization format was adopted, and the LFDA was also effective to reduce the LOD. With the LFDA, typical LOD values for proteins and nucleic acids were both around 1 pM.
Collapse
Affiliation(s)
- Kazuo Hosokawa
- Bioengineering Laboratory, RIKEN Cluster for Pioneering Research
| |
Collapse
|
5
|
Hashemi E, Forouzandeh M. Designing a new biosensor "DNA ELISA" to detect Escherichia coli using genomic DNA and comparison of this method to PCR-ELISA. J Enzyme Inhib Med Chem 2018; 33:722-725. [PMID: 29618236 PMCID: PMC6010088 DOI: 10.1080/14756366.2018.1450748] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/25/2017] [Revised: 03/02/2018] [Accepted: 03/06/2018] [Indexed: 01/18/2023] Open
Abstract
In this experiment, DNA-ELISA biosensor was introduced, bearing the ability to detect specific bacteria in about 4 h. This is a more rapid system in comparison to conventional methods, like colony counting method. Moreover, this method does not require any amplification and directly detects genomic DNA of bacteria, giving a lower limit to the sensitivity of 40,000 bacteria. In this study, two specific probes capture (biotin labelled) and detector (dig labelled), were used against special regions of 16s rRNA gene of Escherichia coli ATCC 25922. The capture probe has the ability to trap the target bacterial DNA from a pool of other kinds of bacteria under specific conditions. The detector probe then was used to hybridize to the genome of trapped bacteria. The detection proceeds by adding HRP-anti dig enzyme and its substrate, ABTS to emit light. Light absorbance is measured for verifying the detection.
Collapse
Affiliation(s)
- Elaheh Hashemi
- Department of Medical Biotechnology, Tarbiat Modares University, Tehran, Iran
| | - Mehdi Forouzandeh
- Department of Medical Biotechnology, Tarbiat Modares University, Tehran, Iran
| |
Collapse
|
6
|
Fan Y, Dong D, Li Q, Si H, Pei H, Li L, Tang B. Fluorescent analysis of bioactive molecules in single cells based on microfluidic chips. LAB ON A CHIP 2018; 18:1151-1173. [PMID: 29541737 DOI: 10.1039/c7lc01333g] [Citation(s) in RCA: 40] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/25/2023]
Abstract
Single-cell analysis of bioactive molecules is an essential strategy for a better understanding of cell biology, exploring cell heterogeneity, and improvement of the ability to detect early diseases. In single-cell analysis, highly efficient single-cell manipulation techniques and high-sensitive detection schemes are in urgent need. The rapid development of fluorescent analysis techniques combined with microfluidic chips have offered a widely applicable solution. Thus, in this review, we mainly focus on the application of fluorescence methods in components analysis on microchips at a single-cell level. By targeting different types of biological molecules in cells such as nucleic acids, proteins, and active small molecules, we specially introduce and comment on their corresponding fluorescent probes, fluorescence labelling and sensing strategies, and different fluorescence detection instruments used in single-cell analysis on a microfluidic chip. We hope that through this review, readers will have a better understanding of single-cell fluorescence analysis, especially for single-cell component fluorescence analysis based on microfluidic chips.
Collapse
Affiliation(s)
- Yuanyuan Fan
- College of Chemistry, Chemical Engineering and Materials Science, Collaborative Innovation Center of Functionalized Probes for Chemical Imaging in Universities of Shandong, Key Laboratory of Molecular and Nano Probes, Ministry of Education, Institute of Molecular and Nano Science, Shandong Normal University, Jinan 250014, P. R. China.
| | | | | | | | | | | | | |
Collapse
|
7
|
Garrido-Cardenas JA, Garcia-Maroto F, Alvarez-Bermejo JA, Manzano-Agugliaro F. DNA Sequencing Sensors: An Overview. SENSORS 2017; 17:s17030588. [PMID: 28335417 PMCID: PMC5375874 DOI: 10.3390/s17030588] [Citation(s) in RCA: 39] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/28/2017] [Revised: 03/09/2017] [Accepted: 03/11/2017] [Indexed: 12/23/2022]
Abstract
The first sequencing of a complete genome was published forty years ago by the double Nobel Prize in Chemistry winner Frederick Sanger. That corresponded to the small sized genome of a bacteriophage, but since then there have been many complex organisms whose DNA have been sequenced. This was possible thanks to continuous advances in the fields of biochemistry and molecular genetics, but also in other areas such as nanotechnology and computing. Nowadays, sequencing sensors based on genetic material have little to do with those used by Sanger. The emergence of mass sequencing sensors, or new generation sequencing (NGS) meant a quantitative leap both in the volume of genetic material that was able to be sequenced in each trial, as well as in the time per run and its cost. One can envisage that incoming technologies, already known as fourth generation sequencing, will continue to cheapen the trials by increasing DNA reading lengths in each run. All of this would be impossible without sensors and detection systems becoming smaller and more precise. This article provides a comprehensive overview on sensors for DNA sequencing developed within the last 40 years.
Collapse
|
8
|
Peterson EM, Manhart MW, Harris JM. Single-Molecule Fluorescence Imaging of Interfacial DNA Hybridization Kinetics at Selective Capture Surfaces. Anal Chem 2016; 88:1345-54. [PMID: 26695617 DOI: 10.1021/acs.analchem.5b03832] [Citation(s) in RCA: 41] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/30/2022]
Abstract
Accurate knowledge of the kinetics of complementary oligonucleotide hybridization is integral to the design and understanding of DNA-based biosensors. In this work, single-molecule fluorescence imaging is applied to measuring rates of hybridization between fluorescently labeled target ssDNA and unlabeled probe ssDNA immobilized on glass surfaces. In the absence of probe site labeling, the capture surface must be highly selective to avoid the influence of nonspecific adsorption on the interpretation of single-molecule imaging results. This is accomplished by increasing the probe molecule site densities by a factor of ∼100 compared to optically resolvable sites so that nonspecific interactions compete with a much greater number of capture sites and by immobilizing sulfonate groups to passivate the surface between probe strands. The resulting substrates exhibit very low nonspecific adsorption, and the selectivity for binding a complementary target sequence exceeds that of a scrambled sequence by nearly 3 orders of magnitude. The population of immobilized DNA probe sites is quantified by counting individual DNA duplexes at low target concentrations, and those results are used to calibrate fluorescence intensities on the same sample at much higher target concentrations to measure a full binding isotherm. Dissociation rates are determined from interfacial residence times of individual DNA duplexes. Equilibrium and rate constants of hybridization, K(a) = 38 (±1) μM(-1), k(on) = 1.64 (±0.06) × 10(6) M(-1) s(-1), and k(off) = 4.3 (±0.1) × 10(-2) s(-1), were found not to change with surface density of immobilized probe DNA, indicating that hybridization events at neighboring probe sites are independent. To test the influence of probe-strand immobilization on hybridization, the kinetics of the probe target reaction at the surface were compared with the same reaction in free solution, and the equilibrium constants and dissociation and association rates were found to be nearly equivalent. The selectivity of these capture surfaces should facilitate sensitive investigations of DNA hybridization at the limit of counting molecules. Because the immobilized probe DNA on these surfaces is unlabeled, photobleaching of a probe label is not an issue, allowing capture substrates to be used for long periods of time or even reused in multiple experiments.
Collapse
Affiliation(s)
- Eric M Peterson
- Department of Chemistry, University of Utah , 315 South 1400 East, Salt Lake City, Utah 84112-0850, United States
| | - Michael W Manhart
- Department of Chemistry, University of Utah , 315 South 1400 East, Salt Lake City, Utah 84112-0850, United States
| | - Joel M Harris
- Department of Chemistry, University of Utah , 315 South 1400 East, Salt Lake City, Utah 84112-0850, United States
| |
Collapse
|
9
|
Gabriel M, Balle D, Bigault S, Pornin C, Gétin S, Perraut F, Block MR, Chatelain F, Picollet-D'hahan N, Gidrol X, Haguet V. Time-lapse contact microscopy of cell cultures based on non-coherent illumination. Sci Rep 2015; 5:14532. [PMID: 26459014 PMCID: PMC4602279 DOI: 10.1038/srep14532] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/30/2015] [Accepted: 08/25/2015] [Indexed: 11/30/2022] Open
Abstract
Video microscopy offers outstanding capabilities to investigate the dynamics of biological and pathological mechanisms in optimal culture conditions. Contact imaging is one of the simplest imaging architectures to digitally record images of cells due to the absence of any objective between the sample and the image sensor. However, in the framework of in-line holography, other optical components, e.g., an optical filter or a pinhole, are placed underneath the light source in order to illuminate the cells with a coherent or quasi-coherent incident light. In this study, we demonstrate that contact imaging with an incident light of both limited temporal and spatial coherences can be achieved with sufficiently high quality for most applications in cell biology, including monitoring of cell sedimentation, rolling, adhesion, spreading, proliferation, motility, death and detachment. Patterns of cells were recorded at various distances between 0 and 1000 μm from the pixel array of the image sensors. Cells in suspension, just deposited or at mitosis focalise light into photonic nanojets which can be visualised by contact imaging. Light refraction by cells significantly varies during the adhesion process, the cell cycle and among the cell population in connection with every modification in the tridimensional morphology of a cell.
Collapse
Affiliation(s)
- Marion Gabriel
- CEA, iRTSV-BGE, F-38000 Grenoble, France.,INSERM, BGE, F-38000 Grenoble, France.,Université Grenoble Alpes, iRTSV-BGE, F-38000 Grenoble, France
| | - Dorothée Balle
- CEA, iRTSV-BGE, F-38000 Grenoble, France.,INSERM, BGE, F-38000 Grenoble, France.,Université Grenoble Alpes, iRTSV-BGE, F-38000 Grenoble, France
| | - Stéphanie Bigault
- CEA, iRTSV-BGE, F-38000 Grenoble, France.,INSERM, BGE, F-38000 Grenoble, France.,Université Grenoble Alpes, iRTSV-BGE, F-38000 Grenoble, France
| | | | | | | | - Marc R Block
- IAB, CRI INSERM/UJF U823, 38706 La Tronche, France
| | | | - Nathalie Picollet-D'hahan
- CEA, iRTSV-BGE, F-38000 Grenoble, France.,INSERM, BGE, F-38000 Grenoble, France.,Université Grenoble Alpes, iRTSV-BGE, F-38000 Grenoble, France
| | - Xavier Gidrol
- CEA, iRTSV-BGE, F-38000 Grenoble, France.,INSERM, BGE, F-38000 Grenoble, France.,Université Grenoble Alpes, iRTSV-BGE, F-38000 Grenoble, France
| | - Vincent Haguet
- CEA, iRTSV-BGE, F-38000 Grenoble, France.,INSERM, BGE, F-38000 Grenoble, France.,Université Grenoble Alpes, iRTSV-BGE, F-38000 Grenoble, France
| |
Collapse
|
10
|
Strachan BC, Sloane HS, Lee JC, Leslie DC, Landers JP. Investigation of the DNA target design parameters for effective hybridization-induced aggregation of particles for the sequence-specific detection of DNA. Analyst 2015; 140:2008-15. [PMID: 25673152 DOI: 10.1039/c4an02101k] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
In a recent publication, we presented a label-free method for the detection of specific DNA sequences through the hybridization-induced aggregation (HIA) of a pair of oligonucleotide-adducted magnetic particles. Here we show, through the use of modified hardware, that we are able to simultaneously analyze multiple (4) samples, and detect a 26-mer ssDNA sequence at femtomolar concentrations in minutes. As such, this work represents an improvement in throughput and a 100-fold improvement in sensitivity, compared to that reported previously. Here, we also investigate the design parameters of the target sequence, in an effort to maximize the sensitivity of HIA and to use as a guide in future applications of this work. Modifications were made to the original 26-mer oligonucleotide sequence to evaluate the effects of: (1) non-complementary flanking bases, (2) target sequence length, and (3) single base mismatches on aggregation response. The aggregation response decreased as the number of the non-complementary flanking bases increased, with only a five base addition lowering the LOD by four orders of magnitude. Low sensitivity was observed with short sequences of 6 and 10 complementary bases, which were only detectable at micromolar concentrations. Target sequences with 20, 26 or 32 complementary bases provided the greatest sensitivity and were detectable at femtomolar concentrations. Additionally, HIA could effectively differentiate sequences that were fully complementary from those containing 1, 2 or 3 single base mismatches at micromolar concentrations. The robustness of the HIA system to other buffer components was explored with nine potential assay interferents that could affect hybridization (aggregation) or falsely induce aggregation. Of these, purified BSA and lysed whole blood induced a false aggregation. None of the interferents inhibited aggregation when the hybridizing target was added. Having delineated the fundamental parameters affecting HIA-target hybridization, and demonstrating that HIA had the selectivity to detect single base mismatches, this fluor-free end-point detection has the potential to become a powerful tool for microfluidic DNA detection.
Collapse
Affiliation(s)
- Briony C Strachan
- Department of Chemistry, University of Virginia, Charlottesville, VA 22904, USA.
| | | | | | | | | |
Collapse
|
11
|
Presnova GV, Rubtsova MY, Presnov DE, Grigorenko VG, Yaminsky IV, Egorov AM. [Conjugates of streptavidin with gold nanoparticles for the visualization of dna single interactions on the silicon surface]. BIOMEDIT︠S︡INSKAI︠A︡ KHIMII︠A︡ 2015; 60:538-42. [PMID: 25386881 DOI: 10.18097/pbmc20146005538] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
The potential of the method of scanning electron microscopy (SEM) to visualize the results of individual acts of DNA and oligonucleotides hybridization using gold nanoparticles as label was investigated. Molecule of biotin was introduced into DNA or oligonucleotide, and then it was detected in DNA duplex using a conjugate of streptavidin with gold nanoparticles. Effective imaging of DNA duplexes was possible using a conjugate prepared by covalent binding.. The detection limit of the model oligonucleotide of 19 bases was 20 pg.
Collapse
|
12
|
Dubrovin EV, Presnova GV, Rubtsova MY, Egorov AM, Grigorenko VG, Yaminsky IV. The Use of Atomic Force Microscopy for 3D Analysis of Nucleic Acid Hybridization on Microarrays. Acta Naturae 2015; 7:108-14. [PMID: 26085952 PMCID: PMC4463420] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/04/2022] Open
Abstract
Oligonucleotide microarrays are considered today to be one of the most efficient methods of gene diagnostics. The capability of atomic force microscopy (AFM) to characterize the three-dimensional morphology of single molecules on a surface allows one to use it as an effective tool for the 3D analysis of a microarray for the detection of nucleic acids. The high resolution of AFM offers ways to decrease the detection threshold of target DNA and increase the signal-to-noise ratio. In this work, we suggest an approach to the evaluation of the results of hybridization of gold nanoparticle-labeled nucleic acids on silicon microarrays based on an AFM analysis of the surface both in air and in liquid which takes into account of their three-dimensional structure. We suggest a quantitative measure of the hybridization results which is based on the fraction of the surface area occupied by the nanoparticles.
Collapse
Affiliation(s)
- E. V. Dubrovin
- Department of Physics, Lomonosov Moscow State University, Leninskie gory, 1/2, 119991, Moscow, Russia
| | - G. V. Presnova
- Department of Chemistry, Lomonosov Moscow State University, Leninskie gory, 1/3, 119991, Moscow, Russia
| | - M. Yu. Rubtsova
- Department of Chemistry, Lomonosov Moscow State University, Leninskie gory, 1/3, 119991, Moscow, Russia
| | - A. M. Egorov
- Department of Chemistry, Lomonosov Moscow State University, Leninskie gory, 1/3, 119991, Moscow, Russia,Russian Medical Academy of Postgraduate Education, Barrikadnaya, 2/1, 125993, Moscow, Russia
| | - V. G. Grigorenko
- Department of Chemistry, Lomonosov Moscow State University, Leninskie gory, 1/3, 119991, Moscow, Russia
| | - I. V. Yaminsky
- Department of Physics, Lomonosov Moscow State University, Leninskie gory, 1/2, 119991, Moscow, Russia,Department of Chemistry, Lomonosov Moscow State University, Leninskie gory, 1/3, 119991, Moscow, Russia
| |
Collapse
|
13
|
Cheng H, Wu JX, Zheng H, Xu W, Zhou L, Too HP, Choi WK. DNA hybridization on silicon nanowire platform prepared by glancing angle deposition and metal assisted chemical etching process. RSC Adv 2015. [DOI: 10.1039/c5ra07117h] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Porous nanowire surface provides high capacity for oligonucleotide hybridization.
Collapse
Affiliation(s)
- H. Cheng
- Advanced Materials for Micro- and Nano-Systems
- Singapore-MIT Alliance
- Singapore
| | - J. X. Wu
- NUS Graduate School for Integrative Sciences and Engineering
- National University of Singapore
- Singapore
| | - H. Zheng
- GLOBALFOUNDRIES Singapore Pte. Ltd
- Singapore
| | - W. Xu
- Department of Electrical and Computer Engineering
- National University of Singapore
- Singapore
| | | | - H. P. Too
- Department of Biochemistry
- National University of Singapore
- Singapore
- Bioprocessing Technology Institute
- Singapore
| | - W. K. Choi
- Advanced Materials for Micro- and Nano-Systems
- Singapore-MIT Alliance
- Singapore
- NUS Graduate School for Integrative Sciences and Engineering
- National University of Singapore
| |
Collapse
|
14
|
Csáki A, Thiele M, Jatschka J, Dathe A, Zopf D, Stranik O, Fritzsche W. Plasmonic nanoparticle synthesis and bioconjugation for bioanalytical sensing. Eng Life Sci 2014. [DOI: 10.1002/elsc.201400075] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022] Open
Affiliation(s)
- Andrea Csáki
- Leibniz Institute of Photonic Technology; Jena Germany
| | | | | | - André Dathe
- Leibniz Institute of Photonic Technology; Jena Germany
| | - David Zopf
- Leibniz Institute of Photonic Technology; Jena Germany
| | | | | |
Collapse
|
15
|
Electrical charging characteristics of Au NPs embedded by sequence specific complementary DNA hybridization in metal-pentacene-insulator-silicon device. BIOCHIP JOURNAL 2014. [DOI: 10.1007/s13206-014-8405-7] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
16
|
Nimse SB, Song K, Sonawane MD, Sayyed DR, Kim T. Immobilization techniques for microarray: challenges and applications. SENSORS 2014; 14:22208-29. [PMID: 25429408 PMCID: PMC4299010 DOI: 10.3390/s141222208] [Citation(s) in RCA: 90] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/21/2014] [Revised: 10/24/2014] [Accepted: 11/11/2014] [Indexed: 02/03/2023]
Abstract
The highly programmable positioning of molecules (biomolecules, nanoparticles, nanobeads, nanocomposites materials) on surfaces has potential applications in the fields of biosensors, biomolecular electronics, and nanodevices. However, the conventional techniques including self-assembled monolayers fail to position the molecules on the nanometer scale to produce highly organized monolayers on the surface. The present article elaborates different techniques for the immobilization of the biomolecules on the surface to produce microarrays and their diagnostic applications. The advantages and the drawbacks of various methods are compared. This article also sheds light on the applications of the different technologies for the detection and discrimination of viral/bacterial genotypes and the detection of the biomarkers. A brief survey with 115 references covering the last 10 years on the biological applications of microarrays in various fields is also provided.
Collapse
Affiliation(s)
- Satish Balasaheb Nimse
- Institute for Applied Chemistry and Department of Chemistry, Hallym University, Chuncheon 200-702, Korea.
| | - Keumsoo Song
- Biometrix Technology, Inc. 202 BioVenture Plaza, Chuncheon 200-161, Korea.
| | - Mukesh Digambar Sonawane
- Institute for Applied Chemistry and Department of Chemistry, Hallym University, Chuncheon 200-702, Korea.
| | - Danishmalik Rafiq Sayyed
- Institute for Applied Chemistry and Department of Chemistry, Hallym University, Chuncheon 200-702, Korea.
| | - Taisun Kim
- Institute for Applied Chemistry and Department of Chemistry, Hallym University, Chuncheon 200-702, Korea.
| |
Collapse
|
17
|
Campos R, Kotlyar A, Ferapontova EE. DNA-mediated electron transfer in DNA duplexes tethered to gold electrodes via phosphorothioated dA tags. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2014; 30:11853-11857. [PMID: 25267302 DOI: 10.1021/la502766g] [Citation(s) in RCA: 33] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
The efficiency of DNA-based bioelectronic devices strongly depends on the way DNA molecules are linked to the electronic component. Commonly, DNA is tethered to metal electrodes via an alkanethiol linker representing an additional barrier for electron transport. Here we demonstrate that the replacement of the alkanethiol linker for a phosphorothioated adenosine tag increases the rate of DNA-mediated electron transfer (ET) up to 259 s(-1), representing the highest hitherto reported rate of electrochemically-modulated ET, and improves the stability of DNA-electrode surface binding. Both results offer pronounced technological and scientific benefits for DNA-based electronics.
Collapse
Affiliation(s)
- Rui Campos
- Interdisciplinary Nanoscience Center (iNANO) and ‡Center for DNA Nanotechnology (CDNA) at iNANO, Science and Technology, Aarhus University , Gustav Wieds Vej 14, 8000 Aarhus, Denmark
| | | | | |
Collapse
|
18
|
Clark AW, Thompson DG, Graham D, Cooper JM. Engineering DNA binding sites to assemble and tune plasmonic nanostructures. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2014; 26:4286-4292. [PMID: 24687548 DOI: 10.1002/adma.201400510] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/31/2014] [Revised: 03/09/2014] [Indexed: 06/03/2023]
Affiliation(s)
- Alasdair W Clark
- Biomedical Engineering Research Division, School of Engineering, University of Glasgow, Glasgow, UK, G12 8LT
| | | | | | | |
Collapse
|
19
|
Presnova GV, Rubtsova MY, Presnov DE, Grigorenko VG, Yaminsky IV, Egorov AM. Streptavidin conjugates with gold nanoparticles for visualization of single DNA interactions on the silicon surface. BIOCHEMISTRY MOSCOW-SUPPLEMENT SERIES B-BIOMEDICAL CHEMISTRY 2014. [DOI: 10.1134/s1990750814020103] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
20
|
Gibriel A. Effect of Target Length on Specificity and Sensitivity of Oligonucleotide Microarrays: A Comparison between Dendrimer and Modified PCR based Labelling Methods. Open Biochem J 2014; 8:11-20. [PMID: 24551024 PMCID: PMC3927376 DOI: 10.2174/1874091x01408010011] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/29/2013] [Revised: 11/07/2013] [Accepted: 11/08/2013] [Indexed: 12/28/2022] Open
Abstract
DNA microarrays are widely used as end point detectors for gene expression analysis. Several methods have
been developed for target labelling to enable quantification but without taking target length into consideration. Here we
highlight the importance of choosing the optimum target length that would ensure specificity without compromising sensitivity
of the assay. For this, eight plasmids that are identical to each other except for a closely related 23 bp unique reporter
(UR) sequence were used to examine the hybridization efficiency for these URs. Targets of various lengths were
generated and labelled as follows: full length and 330 bases transcripts using a dendrimer labelling method, 120 bp amplicons
by the modified PCR end labelling method and synthetic labelled targets of 33 bases. This report also shows the advantages
of using the modified PCR method over other labelling methods in generating labelled amplicons of the desired
lengths to maximize hybridization efficiency.
Collapse
Affiliation(s)
- Abdullah Gibriel
- Biochemistry and Molecular Biology Department, Faculty of Pharmacy, Ahram Canadian University (ACU) ; Institute of Molecular, Cell and Systems Biology, College of Medical, Veterinary and Life Sciences, University of Glasgow, Glasgow, United Kingdom
| |
Collapse
|
21
|
Saeki T, Tanaka T. ELECTROCHEMISTRY 2014; 82:277-281. [DOI: 10.5796/electrochemistry.82.277] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022] Open
|
22
|
Sobek J, Aquino C, Weigel W, Schlapbach R. Drop drying on surfaces determines chemical reactivity - the specific case of immobilization of oligonucleotides on microarrays. BMC BIOPHYSICS 2013; 6:8. [PMID: 23758982 PMCID: PMC3694035 DOI: 10.1186/2046-1682-6-8] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/12/2012] [Accepted: 02/13/2013] [Indexed: 12/13/2022]
Abstract
BACKGROUND Drop drying is a key factor in a wide range of technical applications, including spotted microarrays. The applied nL liquid volume provides specific reaction conditions for the immobilization of probe molecules to a chemically modified surface. RESULTS We investigated the influence of nL and μL liquid drop volumes on the process of probe immobilization and compare the results obtained to the situation in liquid solution. In our data, we observe a strong relationship between drop drying effects on immobilization and surface chemistry. In this work, we present results on the immobilization of dye labeled 20mer oligonucleotides with and without an activating 5'-aminoheptyl linker onto a 2D epoxysilane and a 3D NHS activated hydrogel surface. CONCLUSIONS Our experiments identified two basic processes determining immobilization. First, the rate of drop drying that depends on the drop volume and the ambient relative humidity. Oligonucleotides in a dried spot react unspecifically with the surface and long reaction times are needed. 3D hydrogel surfaces allow for immobilization in a liquid environment under diffusive conditions. Here, oligonucleotide immobilization is much faster and a specific reaction with the reactive linker group is observed. Second, the effect of increasing probe concentration as a result of drop drying. On a 3D hydrogel, the increasing concentration of probe molecules in nL spotting volumes accelerates immobilization dramatically. In case of μL volumes, immobilization depends on whether the drop is allowed to dry completely. At non-drying conditions, very limited immobilization is observed due to the low oligonucleotide concentration used in microarray spotting solutions. The results of our study provide a general guideline for microarray assay development. They allow for the initial definition and further optimization of reaction conditions for the immobilization of oligonucleotides and other probe molecule classes to different surfaces in dependence of the applied spotting and reaction volume.
Collapse
Affiliation(s)
- Jens Sobek
- Functional Genomics Center Zurich, ETH Zurich/ University of Zurich, Winterthurerstrasse 190, Zurich, CH-8057, Switzerland.
| | | | | | | |
Collapse
|
23
|
Broderick AH, Carter MCD, Lockett MR, Smith LM, Lynn DM. Fabrication of oligonucleotide and protein arrays on rigid and flexible substrates coated with reactive polymer multilayers. ACS APPLIED MATERIALS & INTERFACES 2013; 5:351-9. [PMID: 23237360 PMCID: PMC3553252 DOI: 10.1021/am302285n] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
We report a top-down approach to the fabrication of oligonucleotide and protein arrays on surfaces coated with ultrathin, amine-reactive polymer multilayers fabricated by the covalent "layer-by-layer" (LbL) assembly of polyethyleneimine (PEI) and the amine-reactive, azlactone-functionalized polymer poly(2-vinyl-4,4-dimethylazlactone) (PVDMA). Manual spotting of amine-terminated oligonucleotide probe sequences on planar glass slides coated with PEI/PVDMA multilayers (~35 nm thick) yielded arrays of immobilized probes that hybridized fluorescently labeled complementary sequences with high signal intensities, high signal-to-noise ratios, and high sequence specificity. Treatment of residual azlactone functionality with the nonfouling small-molecule amine d-glucamine resulted in regions between the features of these arrays that resisted adsorption of protein and permitted hybridization in complex media containing up to 10 mg/mL protein. The residual azlactone groups in these films were also exploited to immobilize proteins on film-coated surfaces and fabricate functional arrays of proteins and enzymes. The ability to deposit PEI/PVDMA multilayers on substrates of arbitrary size, shape, and composition permitted the fabrication of arrays of oligonucleotides on the surfaces of multilayer-coated sheets of poly(ethylene terephthalate) and heat-shrinkable polymer film. Arrays fabricated on these flexible plastic substrates can be bent, cut, resized, and manipulated physically in ways that are difficult using more conventional rigid substrates. This approach could thus contribute to the development of new assay formats and new applications of biomolecule arrays. The methods described here are straightforward to implement, do not require access to specialized equipment, and should also be compatible with automated liquid-handling methods used to fabricate higher-density arrays of oligonucleotides and proteins on more traditional surfaces.
Collapse
Affiliation(s)
- Adam H Broderick
- Department of Chemical and Biological Engineering, 1415 Engineering Drive, University of Wisconsin-Madison, Madison, Wisconsin 53706, USA
| | | | | | | | | |
Collapse
|
24
|
Tuning drug loading and release properties of diatom silica microparticles by surface modifications. Int J Pharm 2012; 443:230-41. [PMID: 23287775 DOI: 10.1016/j.ijpharm.2012.12.012] [Citation(s) in RCA: 80] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/14/2012] [Revised: 11/20/2012] [Accepted: 12/12/2012] [Indexed: 11/20/2022]
Abstract
Diatomaceous earth (DE), or diatomite silica microparticles originated from fossilized diatoms are a potential substitute for its silica-based synthetic counterparts to address limitations in conventional drug delivery. This study presents the impact of engineered surface chemistry of DE microparticles on their drug loading and release properties. Surface modifications with four silanes, including 3-aminopropyltriethoxy silane (APTES), methoxy-poly-(ethylene-glycol)-silane (mPEG-silane), 7-octadecyltrichlorosilane (OTS), 3-(glycidyloxypropyl)trimethoxysilane (GPTMS) and two phosphonic acids, namely 2-carboxyethyl-phosphonic acid (2 CEPA) and 16-phosphono-hexadecanoic acid (16 PHA) were explored in order to tune drug loading and release characteristics of water insoluble (indomethacin) and water soluble drugs (gentamicin). Successful grafting of these functional groups with different interfacial properties was confirmed using X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). Thermogravimetric analysis (TGA) was applied to determine the amount of loaded drugs and UV-spectrophotometry to analyse in vitro drug release from modified DE microparticles. Differences in drug release time (13-26 days) and loading capacity (14-24%) were observed depending on functional groups on the surface of DE microparticles. It was found that hydrophilic surfaces, due to the presence of polar carboxyl, amine or hydrolyzed epoxy group, favor extended release of indomethacin, while the hydrophobic DE surface modified by organic hydrocarbons gives a better sustained release profile for gentamicin. This work demonstrates that by changing surface functionalities on DE microparticles, it is possible to tune their drug loading and release characteristics for both hydrophobic and hydrophilic drugs and therefore achieve optimal drug delivery performance.
Collapse
|
25
|
O'Donnell MJ, Tang K, Köster H, Smith CL, Cantor CR. High-density, covalent attachment of DNA to silicon wafers for analysis by maldi-tof mass spectrometry. Anal Chem 2012; 69:2438-43. [PMID: 21639380 DOI: 10.1021/ac961007v] [Citation(s) in RCA: 97] [Impact Index Per Article: 8.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
A method is described for the covalent attachment of DNA to a solid surface at high density for hybridization detection by mass spectrometry. A silicon wafer is functionalized to place an amino group on the surface; a heterobifunctional cross-linking agent is then reacted with the primary amine to incorporate an iodoacetamido group. An oligodeoxynucleotide containing a 3'- or a 5'-disulfide is treated with a reducing agent, resulting in a terminal free thiol, which is then coupled to the iodoacetamido surface. Analysis of the surface reveals that the amount of covalently bound oligodeoxynucleotide is 250 fmol of DNA/mm(2) with ∼40% of the immobilized oligodeoxynucleotides available for hybridization. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometric (MALDI-TOF MS) analysis reveals that the covalent linkage to the support remains intact, only the annealed strand is desorbed by the laser, and the amount of DNA hybridized to the array is sufficient for detection.
Collapse
Affiliation(s)
- M J O'Donnell
- Sequenom Inc., 11555 Sorrento Valley Road, San Diego, California 92121, Department of Biochemistry and Molecular Biology, University of Hamburg, Martin-Luther-King Platz, 20146 Hamburg, Germany, and Center for Advanced Biotechnology, Boston University, Boston, Massachusetts 02215
| | | | | | | | | |
Collapse
|
26
|
Escorihuela J, Bañuls MJ, Puchades R, Maquieira Á. Development of Oligonucleotide Microarrays onto Si-Based Surfaces via Thioether Linkage Mediated by UV Irradiation. Bioconjug Chem 2012; 23:2121-8. [DOI: 10.1021/bc300333a] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
Affiliation(s)
- Jorge Escorihuela
- Centro de Reconocimiento
Molecular y Desarrollo Tecnológico,
Departamento de Química, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia,
Spain
| | - María-José Bañuls
- Centro de Reconocimiento
Molecular y Desarrollo Tecnológico,
Departamento de Química, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia,
Spain
| | - Rosa Puchades
- Centro de Reconocimiento
Molecular y Desarrollo Tecnológico,
Departamento de Química, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia,
Spain
| | - Ángel Maquieira
- Centro de Reconocimiento
Molecular y Desarrollo Tecnológico,
Departamento de Química, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia,
Spain
| |
Collapse
|
27
|
Cho E, Brown A, Kuech TF. Chemical characterization of DNA-immobilized InAs surfaces using X-ray photoelectron spectroscopy and near-edge X-ray absorption fine structure. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2012; 28:11890-11898. [PMID: 22809291 DOI: 10.1021/la302313v] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
Single-stranded DNA immobilized on an III-V semiconductor is a potential high-sensitivity biosensor. The chemical and electronic changes occurring upon the binding of DNA to the InAs surface are essential to understanding the DNA-immobilization mechanism. In this work, the chemical properties of DNA-immobilized InAs surfaces were determined through high-resolution X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS). Prior to DNA functionalization, HF- and NH(4)OH- based aqueous etches were used to remove the native oxide from the InAs surface. The initial chemical state of the surface resulting from these etches were characterized prior to functionalization. F-tagged thiolated single-stranded DNA (ssDNA) was used as the probe species under two different functionalization methods. The presence of DNA immobilized on the surface was confirmed from the F 1s, N 1s, and P 2p peaks in the XPS spectra. The presence of salt had a profound effect on the density of immobilized DNA on the InAs surface. To study the interfacial chemistry, the surface was treated with thiolated ssDNA with and without the mercaptohexanol molecule. An analysis of the As 3d and In 3d spectra indicates that both In-S and As-S are present on the surface after DNA functionalization. The amount of In-S and As-S was determined by the functionalization method as well as the presence of mercaptohexanol during functionalization. The orientation of the adsorbed ssDNA is determined by polarization-dependent NEXAFS utilizing the N K-edge. The immobilized ssDNA molecule has a preferred tilt angle with respect to the substrate normal, but with a random azimuthal distribution.
Collapse
Affiliation(s)
- EunKyung Cho
- Department of Chemical and Biological Engineering, University of Wisconsin-Madison, 1415 Engineering Drive, Madison, Wisconsin 53706, USA
| | | | | |
Collapse
|
28
|
McInnes SJP, Voelcker NH. Porous silicon-based nanostructured microparticles as degradable supports for solid-phase synthesis and release of oligonucleotides. NANOSCALE RESEARCH LETTERS 2012; 7:385. [PMID: 22784812 PMCID: PMC3552826 DOI: 10.1186/1556-276x-7-385] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 05/15/2012] [Accepted: 06/18/2012] [Indexed: 06/01/2023]
Abstract
We describe the preparation of several types of porous silicon (pSi) microparticles as supports for the solid-phase synthesis of oligonucleotides. The first of these supports facilitates oligonucleotide release from the nanostructured support during the oligonucleotide deprotection step, while the second type of support is able to withstand the cleavage and deprotection of the oligonucleotides post synthesis and subsequently dissolve at physiological conditions (pH = 7.4, 37°C), slowly releasing the oligonucleotides. Our approach involves the fabrication of pSi microparticles and their functionalisation via hydrosilylation reactions to generate a dimethoxytrityl-protected alcohol on the pSi surface as an initiation point for the synthesis of short oligonucleotides.
Collapse
Affiliation(s)
- Steven J P McInnes
- School of Chemical and Physical Sciences, Flinders University, Bedford Park, Adelaide, South Australia, 5042, Australia
- Mawson Institute, University of South Australia, Mawson Lakes, Adelaide, South Australia, 5095, Australia
| | - Nicolas H Voelcker
- Mawson Institute, University of South Australia, Mawson Lakes, Adelaide, South Australia, 5095, Australia
| |
Collapse
|
29
|
Gopinath SCB, Awazu K, Fujimaki M, Shimizu K, Mizutani W, Tsukagoshi K. Surface functionalization chemistries on highly sensitive silica-based sensor chips. Analyst 2012; 137:3520-7. [PMID: 22705905 DOI: 10.1039/c2an35159e] [Citation(s) in RCA: 38] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
The surfaces of silica-based sensor chips, designed for evanescent-field-coupled waveguide-mode sensors, were functionalized using various surface chemistries. The immobilization of molecular entities on the functionalized silica surfaces was monitored using various microscopic techniques (scanning electron, fluorescence, and atomic force microscopies). Further, gold nanoparticle-based signal enhancement analyses were performed with protein conjugation on different functionalized surfaces using a waveguide-mode sensor. Based on these analyses, the sensor surfaces modified with glutaraldehyde (Glu) and carbonyldiimidazole were found to be good for molecules of different sizes. In addition, it can be inferred that the Glu-modified surface may be suitable for small molecules with diameters around 5 nm owing to its surface roughness. The modified surface with carbonyldiimidazole is suitable for the direct immobilization of larger molecules especially for biomolecular assemblies without intermediate chemical modifications.
Collapse
Affiliation(s)
- Subash C B Gopinath
- Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Central 5, 1-1-1 Higashi, Tsukuba, Ibaraki 305-8565, Japan.
| | | | | | | | | | | |
Collapse
|
30
|
Niepelt R, Schröder UC, Sommerfeld J, Slowik I, Rudolph B, Möller R, Seise B, Csaki A, Fritzsche W, Ronning C. Biofunctionalization of zinc oxide nanowires for DNA sensory applications. NANOSCALE RESEARCH LETTERS 2011; 6:511. [PMID: 21867525 PMCID: PMC3212050 DOI: 10.1186/1556-276x-6-511] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/11/2011] [Accepted: 08/25/2011] [Indexed: 05/27/2023]
Abstract
We report on the biofunctionalization of zinc oxide nanowires for the attachment of DNA target molecules on the nanowire surface. With the organosilane glycidyloxypropyltrimethoxysilane acting as a bifunctional linker, amino-modified capture molecule oligonucleotides have been immobilized on the nanowire surface. The dye-marked DNA molecules were detected via fluorescence microscopy, and our results reveal a successful attachment of DNA capture molecules onto the nanowire surface. The electrical field effect induced by the negatively charged attached DNA molecules should be able to control the electrical properties of the nanowires and gives way to a ZnO nanowire-based biosensing device.
Collapse
Affiliation(s)
- Raphael Niepelt
- Institute of Solid State Physics, Friedrich-Schiller-Universität, Max-Wien-Platz 1, 07743 Jena, Germany
| | - Ulrich C Schröder
- Institute of Solid State Physics, Friedrich-Schiller-Universität, Max-Wien-Platz 1, 07743 Jena, Germany
| | - Jana Sommerfeld
- Institute of Solid State Physics, Friedrich-Schiller-Universität, Max-Wien-Platz 1, 07743 Jena, Germany
| | - Irma Slowik
- Institute of Solid State Physics, Friedrich-Schiller-Universität, Max-Wien-Platz 1, 07743 Jena, Germany
| | - Bettina Rudolph
- Institute of Photonic Technology (IPHT), PO Box 100239, 07702 Jena, Germany
| | - Robert Möller
- Institute of Photonic Technology (IPHT), PO Box 100239, 07702 Jena, Germany
| | - Barbara Seise
- Institute of Photonic Technology (IPHT), PO Box 100239, 07702 Jena, Germany
| | - Andrea Csaki
- Institute of Photonic Technology (IPHT), PO Box 100239, 07702 Jena, Germany
| | - Wolfgang Fritzsche
- Institute of Photonic Technology (IPHT), PO Box 100239, 07702 Jena, Germany
| | - Carsten Ronning
- Institute of Solid State Physics, Friedrich-Schiller-Universität, Max-Wien-Platz 1, 07743 Jena, Germany
| |
Collapse
|
31
|
Dmitrienko EV, Pyshnaia IA, Pyshnyĭ DV. [Oligonucleotide derivatives in the nucleic acid hybridization analysis. I. Covalent immobilization of oligonucleotide probes onto the nylon]. RUSSIAN JOURNAL OF BIOORGANIC CHEMISTRY 2011; 36:700-13. [PMID: 21063457 DOI: 10.1134/s1068162010050134] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
The features of UV-induced immobilization of oligonucleotides on a nylon membranes and the effectiveness of enzymatic labeling of immobilized probes at heterophase detection of nucleic acids are studied. Short terminal oligothymidilate (up to 10 nt) sequences are suggested to attach to the probe via a flexible ethylene glycol based linker. The presence of such fragment enhances the intensity of immobilization and reduces UV-dependent degradation of the targeted (sequence-specific) part of the probe by reducing the dose needed for the immobilization of DNA. The optimum dose of UV-irradiation is determined to be ~0.4 J/cm(2) at the wavelength 254 nm. This dose provides high level of hybridization signal for immobilized probes with various nucleotide composition of the sequence specific moiety. The amide groups of the polyamide are shown to play the key role in the photoinduced immobilization of nucleic acids, whereas the primary amino groups in the structure of PA is not the center responsible for the covalent binding of DNA by UV-irradiation, as previously believed. Various additives in the soaking solution during the membrane of UV-dependent immobilization of probes are shown to influence its effectiveness. The use of alternative to UV-irradiation system of radical generation are shown to provide the immobilization of oligonucleotides onto the nylon membrane.
Collapse
|
32
|
Hosokawa K, Sato T, Sato Y, Maeda M. DNA detection on a power-free microchip with laminar flow-assisted dendritic amplification. ANAL SCI 2011; 26:1053-7. [PMID: 20953047 DOI: 10.2116/analsci.26.1053] [Citation(s) in RCA: 11] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
In this paper, we describe DNA detection experiments using our two original technologies, power-free microchip and laminar flow-assisted dendritic amplification (LFDA), which were previously applied to immunoassays. A microchip was fabricated by combining a poly(dimethylsiloxane) (PDMS) part having microchannel patterns and a glass plate modified with probe DNA. We carried out two kinds of experiments: the detection of 21-base biotinylated target DNA and the detection of single-nucleotide polymorphism (SNP) in 56-base unlabeled target DNA by sandwich hybridization with biotinylated probe DNA. For both of the experiments, the necessary solutions were injected into microchannels not by an external power source, but by air dissolution into the PDMS part. After a hybridization reaction, the LFDA was started by injecting FITC-labeled streptavidin and biotinylated anti-streptavidin antibody onto the reaction site. With a detection time of 20 min, the limit of detection (LOD) for the biotinylated target was 2.2 pM, and the LOD for the SNP was 10-30 pM, depending on the SNP type.
Collapse
Affiliation(s)
- Kazuo Hosokawa
- Bioengineering Laboratory, RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198, Japan.
| | | | | | | |
Collapse
|
33
|
Tokuda T, Noda T, Sasagawa K, Ohta J. Optical and Electric Multifunctional CMOS Image Sensors for On-Chip Biosensing Applications. MATERIALS (BASEL, SWITZERLAND) 2010; 4:84-102. [PMID: 28879978 PMCID: PMC5448479 DOI: 10.3390/ma4010084] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/10/2010] [Accepted: 12/27/2010] [Indexed: 11/16/2022]
Abstract
In this review, the concept, design, performance, and a functional demonstration of multifunctional complementary metal-oxide-semiconductor (CMOS) image sensors dedicated to on-chip biosensing applications are described. We developed a sensor architecture that allows flexible configuration of a sensing pixel array consisting of optical and electric sensing pixels, and designed multifunctional CMOS image sensors that can sense light intensity and electric potential or apply a voltage to an on-chip measurement target. We describe the sensors' architecture on the basis of the type of electric measurement or imaging functionalities.
Collapse
Affiliation(s)
- Takashi Tokuda
- Nara Institute of Science and Technology, 8916-5 Takayama, Ikoma, Nara 630-0101, Japan.
- PRESTO, Japan Science and Technology Agency, 3-5 Sanba, Chiyoda, Tokyo, 102-0075, Japan.
| | - Toshihiko Noda
- Nara Institute of Science and Technology, 8916-5 Takayama, Ikoma, Nara 630-0101, Japan.
| | - Kiyotaka Sasagawa
- Nara Institute of Science and Technology, 8916-5 Takayama, Ikoma, Nara 630-0101, Japan.
| | - Jun Ohta
- Nara Institute of Science and Technology, 8916-5 Takayama, Ikoma, Nara 630-0101, Japan.
| |
Collapse
|
34
|
Ikawa T, Kato Y, Yamada T, Shiozawa M, Narita M, Mouri M, Hoshino F, Watanabe O, Tawata M, Shimoyama H. Virus-templated photoimprint on the surface of an azobenzene-containing polymer. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2010; 26:12673-9. [PMID: 20604579 DOI: 10.1021/la101229p] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/16/2023]
Abstract
A photoimprint-based immobilization process is presented for cylindrical viruses on the surface of an azobenzene-bearing acrylate polymer by using atomic force microscopy (AFM). Tobacco mosaic virus (TMV), 18 nm in diameter and ca. 300 nm in length, was employed as a model virus. First, a droplet of an aqueous solution containing TMV was placed on the acrylate polymer surface. After drying the droplet, the polymer surface was irradiated with light at a wavelength of 470 nm from blue-light-emitting diodes. Finally, the surface was washed by aqueous solution with detergents. The polymer surface was observed at each step by AFM. TMV was shown to embed itself gradually on the polymer surface during photoirradiation in a time scale of tens of minutes because of the formation of the surface groove complementary to the shape of TMV. Analysis of immobilization efficiency of TMV on the polymer surface by the immunological enzyme luminescence indicated that efficiency increased proportional to the photoirradiation time. In these experimental conditions, the absorption band of the azobenzene moiety remained constant before and after the photoirradiation. These results show that TMV is physically held on the complementary groove formed on the polymer surface by the photoirradiation.
Collapse
Affiliation(s)
- Taiji Ikawa
- Toyota Central Research & Development Laboratories, Inc., Nagakute, Aichi 480-1192, Japan.
| | | | | | | | | | | | | | | | | | | |
Collapse
|
35
|
Sethi D, Gandhi RP, Kuma P, Gupta KC. Chemical strategies for immobilization of oligonucleotides. Biotechnol J 2010; 4:1513-29. [PMID: 19844919 DOI: 10.1002/biot.200900162] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/27/2023]
Abstract
The development of oligonucleotide-based microarrays (biochips) is a major thrust area in the rapidly growing biotechnology industry, which encompasses a diverse range of research areas including genomics, proteomics, computational biology, and pharmaceuticals, among other activities. Microarray experiments have proved to be unique in offering cost-effective and efficient analysis at the genomic level. In the last few years, biochips have gained increasing acceptance in the study of genetic and cellular processes. As the increase in experimental throughput has posed many challenges to the research community, considerable progress has been made in the advancement of microarray technology. In this review, chemical strategies for immobilization of oligonucleotides have been highlighted with special emphasis on post-synthetic immobilization of oligonucleotides on glass surface. The major objective of this article is to make the researchers acquainted with some most recent advances in this area.
Collapse
Affiliation(s)
- Dalip Sethi
- Institute of Genomics and Integrative Biology, Delhi University Campus, Delhi, India
| | | | | | | |
Collapse
|
36
|
Strelau KK, Schüler T, Möller R, Fritzsche W, Popp J. Novel Bottom-Up SERS Substrates for Quantitative and Parallelized Analytics. Chemphyschem 2010; 11:394-8. [DOI: 10.1002/cphc.200900867] [Citation(s) in RCA: 26] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
|
37
|
Mahajan S, Sethi D, Seth S, Kumar A, Kumar P, Gupta KC. Construction of oligonucleotide microarrays (biochips) via thioether linkage for the detection of bacterial meningitis. Bioconjug Chem 2009; 20:1703-10. [PMID: 19678627 DOI: 10.1021/bc900162u] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Oligonucleotide-based arrays are increasingly becoming useful tools for the analysis of gene expression and single-nucleotide polymorphism. Here, we report a method that allows the direct immobilization of thiolated oligonucleotides onto an epoxy-activated glass surface via a stable thioether linkage under microwaves. The described chemistry efficiently immobilizes the probes via terminal thiol groups with uniform spot morphology. The thioether linkage could endure repeated PCR-like heat cycling with only 2.5% loss after 20 cycles, indicating that the chemistry can be used in integrated PCR/microarray devices. The highlighting feature of the proposed method is that the detection limit for the probe concentration can be reduced to 0.25 microM with 20-mer oligonucleotides. The efficiency of the projected method (approximately 33%) indicates its advantage over the existing standard methods, viz., NTMTA (approximately 9.8%), epoxide-amine (approximately 9.8%) and disulfide (approximately 1.7%). The constructed microarrays were validated through the detection of base mismatches and bacterial meningitis. These features make the projected strategy ideal for manufacturing oligonucleotide arrays and detection of mismatches and bacterial diseases.
Collapse
Affiliation(s)
- S Mahajan
- Institute of Genomics and Integrative Biology (CSIR), Mall Road, Delhi University Campus, Delhi-110 007, India
| | | | | | | | | | | |
Collapse
|
38
|
Schüler T, Kretschmer R, Jessing S, Urban M, Fritzsche W, Möller R, Popp J. A disposable and cost efficient microfluidic device for the rapid chip-based electrical detection of DNA. Biosens Bioelectron 2009; 25:15-21. [DOI: 10.1016/j.bios.2009.05.040] [Citation(s) in RCA: 22] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/06/2009] [Revised: 05/19/2009] [Accepted: 05/21/2009] [Indexed: 10/20/2022]
|
39
|
UV cross-linking of unmodified DNA on glass surfaces. Anal Bioanal Chem 2009; 395:1097-105. [DOI: 10.1007/s00216-009-3045-9] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2009] [Revised: 06/22/2009] [Accepted: 08/07/2009] [Indexed: 10/20/2022]
|
40
|
Péter M, Schüler T, Furthner F, Rensing PA, van Heck GT, Schoo HFM, Möller R, Fritzsche W, van Breemen AJJM, Meinders ER. Flexible biochips for detection of biomolecules. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2009; 25:5384-5390. [PMID: 19326940 DOI: 10.1021/la8037457] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
Miniaturization of biosensors is envisaged by the development of biochips consisting of parallel microarray patterns of binding sites on rigid substrates, such as glass or silicon. Thin plastic substrates are promising flexible alternatives because of the possibility for large-area roll-to-roll manufacturing of disposable chips at lower costs. Mature optical lithography technology faces many challenges when used to pattern flexible foils as a result of the substrate instabilities, especially at higher temperatures. In this work, flexible biochips with gold electrode patterns were fabricated on thin polyethylene naphthalate (PEN) foils using photolithography. The gold electrode structures of the chips were manufactured by direct metal patterning and by lift-off processing. Both methodologies resulted in well-defined electrode patterns as concluded from optical microscopy and scanning electron microscopy (SEM) characterization and resistance measurements. The biochips were successfully employed for the electrical and optical detection of DNA molecules. The DNA detection was based on the immobilization of capture DNA between electrode gaps, hybridization with biotin-labeled target DNA, and enzymatic silver enhancement.
Collapse
Affiliation(s)
- Mária Péter
- Holst Centre/Netherlands Institute for Applied Scientific Research (TNO), High Tech Campus 31, Postbus 8550, 5605 KN Eindhoven, The Netherlands.
| | | | | | | | | | | | | | | | | | | |
Collapse
|
41
|
Sethi D, Kumar A, Gupta KC, Kumar P. A facile method for the construction of oligonucleotide microarrays. Bioconjug Chem 2009; 19:2136-43. [PMID: 18939860 DOI: 10.1021/bc800241k] [Citation(s) in RCA: 11] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
In recent years, the oligonucleotide-based microarray technique has emerged as a powerful and promising tool for various molecular biological studies. Here, a facile protocol for the construction of an oligonucleotide microarray is demonstrated that involves immobilization of oligonucleotide-trimethoxysilyl conjugates onto virgin glass microslides. The projected immobilization strategy reflects high immobilization efficiency ( approximately 36-40%) and signal-to-noise ratio ( approximately 98), and hybridization efficiency ( approximately 32-35%). Using the proposed protocol, aminoalkyl, mercaptoalkyl, and phosphorylated oligonucleotides were immobilized onto virgin glass microslides. Briefly, modified oligonucleotides were reacted first with 3-glycidyloxypropyltriethoxysilane (GOPTS), and subsequently, the resultant conjugates were directly immobilized onto the virgin glass surface by making use of silanization chemistry. The constructed microarrays were then used for discrimination of base mismatches. On subjecting to different pH and thermal conditions, the microarray showed sufficient stability. Application of this chemistry to manufacture oligonucleotide probe-based microarrays for detection of bacterial meningitis is demonstrated. Single-step reaction for the formation of conjugates with the commercially available reagent (GOPTS), omission of capping step and surface modification, and efficient immobilization of oligonucleotides onto the virgin glass surface are the key features of the proposed strategy.
Collapse
Affiliation(s)
- Dalip Sethi
- Institute of Genomics and Integrative Biology (CSIR), Delhi University Campus, Delhi, India
| | | | | | | |
Collapse
|
42
|
Qamhieh K, Wong KY, Lynch GC, Pettitt BM. THE MELTING MECHANISM OF DNA TETHERED TO A SURFACE. INTERNATIONAL JOURNAL OF NUMERICAL ANALYSIS AND MODELING 2009; 6:474-488. [PMID: 19802357 PMCID: PMC2755589] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
The details of melting of DNA immobilized on a chip or nanoparticle determines the sensitivity and operating characteristics of many analytical and synthetic biotechnological devices. Yet, little is known about the differences in how the DNA melting occurs between a homogeneous solution and that on a chip. We used molecular dynamics simulations to explore possible pathways for DNA melting on a chip. Simulation conditions were chosen to ensure that melting occurred in a submicrosecond timescale. The temperature was set to 400 K and the NaCl concentration was set to 0.1 M. We found less symmetry than in the solution case where for oligomeric double-stranded nucleic acids both ends melted with roughly equal probability. On a prepared silica surface we found melting is dominated by fraying from the end away from the surface. Strand separation was hindered by nonspecific surface adsorption at this temperature. At elevated temperatures the melted DNA was attracted to even uncharged organically coated surfaces demonstrating surface fouling. While hybridization is not the simple reverse of melting, this simulation has implications for the kinetics of hybridization.
Collapse
Affiliation(s)
- Khawla Qamhieh
- Department of Chemistry and Institute for Molecular Design, University of Houston, Houston, TX 77204-5003, USA
| | | | | | | |
Collapse
|
43
|
Chu LQ, Knoll W, Förch R. Plasma polymerized epoxide functional surfaces for DNA probe immobilization. Biosens Bioelectron 2008; 24:118-22. [DOI: 10.1016/j.bios.2008.03.026] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2007] [Revised: 02/27/2008] [Accepted: 03/19/2008] [Indexed: 11/17/2022]
|
44
|
Bormuth V, Jannasch A, Ander M, van Kats CM, van Blaaderen A, Howard J, Schäffer E. Optical trapping of coated microspheres. OPTICS EXPRESS 2008; 16:13831-44. [PMID: 18772994 DOI: 10.1364/oe.16.013831] [Citation(s) in RCA: 51] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/06/2023]
Abstract
In an optical trap, micron-sized dielectric particles are held by a tightly focused laser beam. The optical force on the particle is composed of an attractive gradient force and a destabilizing scattering force. We hypothesized that using anti-reflection-coated microspheres would reduce scattering and lead to stronger trapping. We found that homogeneous silica and polystyrene microspheres had a sharp maximum trap stiffness at a diameter of around 800 nm--the trapping laser wavelength in water--and that a silica coating on a polystyrene microsphere was a substantial improvement for larger diameters. In addition, we noticed that homogeneous spheres of a correct size demonstrated anti-reflective properties. Our results quantitatively agreed with Mie scattering calculations and serve as a proof of principle. We used a DNA stretching experiment to confirm the large linear range in detection and force of the coated microspheres and performed a high-force motor protein assay. These measurements show that the surfaces of the coated microspheres are compatible with biophysical assays.
Collapse
Affiliation(s)
- Volker Bormuth
- Max Planck Institute of Molecular Cell Biology and Genetics, Dresden, Germany
| | | | | | | | | | | | | |
Collapse
|
45
|
|
46
|
Pal S, Kim MJ, Song JM. Quantitation of surface coverage of oligonucleotides bound to chip surfaces: a fluorescence-based approach using alkaline phosphatase digestion. LAB ON A CHIP 2008; 8:1332-1341. [PMID: 18651076 DOI: 10.1039/b804066d] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
Abstract
Silanized chip surfaces provide a reliable substrate for immobilization of oligonucleotides. The ability for rapid and sensitive detection of oligonucleotide surface coverage on these chips is crucial for their wide and effective applications in biotechnology. In this paper, two different silanization procedures were used to covalently bind fluorescent-labeled single-stranded DNA onto silicon dioxide or nitride chip surfaces. Effects of surface functionalization techniques for different surfaces, and immobilization conditions, including buffers and solution ionic strength, on surface probe coverage were investigated, quantifying the endpoint probe density by fluorescent measurement upon digestion with alkaline phosphatase (ALP). Digestion of surface-immobilized oligonuleotides with ALP released the fluorophore-tagged probe fragments back into the solution. The detection of DNA was accomplished by laser-induced fluorescence detection of the solution containing those cleaved fragments. The probe surface density on gold thin film, determined by ALP-digestion, was found to coincide well with that measured using the conventional alkanethiol-based fluorescence-displacement technique for the same system. The developed method has important implications for evaluating the performance of different oligonucleotide immobilization strategies. Also, it has the potential to serve as a sample-thrifty, time saving, and therefore routine tool to realize more realistic, practical quantification of the surface coverage of oligonucleotides immobilized on any solid surfaces.
Collapse
Affiliation(s)
- Sukdeb Pal
- Research Institute of Pharmaceutical Sciences and College of Pharmacy, Seoul National University, Seoul, 151-742, South Korea
| | | | | |
Collapse
|
47
|
Sheng H, Ye BC. Different strategies of covalent attachment of oligonucleotide probe onto glass beads and the hybridization properties. Appl Biochem Biotechnol 2008; 152:54-65. [PMID: 18491234 DOI: 10.1007/s12010-008-8245-9] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/08/2007] [Accepted: 03/31/2008] [Indexed: 11/28/2022]
Abstract
The glass bead is a new biochip support material for immobilization biomolecules, due to its independence and convenient rearrangement. In order to optimize the immobilization efficiency of oligonucleotides onto glass beads and obtain the highest hybridization efficiency, three commonly used coupling strategies have been studied for covalently attaching oligonucleotides onto large glass beads. Glass beads with 250 microm diameter were amino-silaned with 2% 3-aminopropyltrimethoxysilane (APTMS) and then reacted separately with glutaraldehyde, succinic anhydride and 1,4-phenylene diisothiocyanate (PDITC) to derive CHO beads, COOH beads and isothiocyanate-modified beads (NCS-Beads) accordingly. Afterwards, amino-terminal oligonucleotides were covalently attached onto the surface of beads achieved by three strategies mentioned above. The immobilization efficiency were studied to compare the three strategies, which turned out 2.55 x 10(13) probes/cm2 for CHO-Beads, 3.21 x 10(13) probes/cm2 for COOH beads and 6.68 x 10(13) probes/cm2 for NCS beads. It meant that the immobilization efficiency based on NCS beads was most acceptable. And the method, developed by attaching amino-terminal oligonucleotides onto these cyanate active beads, could be regarded as an efficient one for immobilizing oligonucleotides onto a solid surface. Moreover, in this paper, the hybridization properties of NCS bead-based oligonucleotides have been studied by employing Cy5-tagged complementary oligonucleotides. It was found that the high probe density NCS beads led to low hybridization efficiency possibly due to the existence of steric crowding. In addition, the equilibrium binding constant KA was determined by employing Langmuir isotherm model, which was 7.0 x 10(6) M(-1) for NCS beads with the density of 6.7 x 10(13) probes/cm2. Furthermore, it only took 60 min to reach hybridization equilibrium. These large microspheres (>100 microm) can be employed in the mesofluidic systems for automated heterogeneous assays.
Collapse
Affiliation(s)
- Han Sheng
- Laboratory of Bioanalysis and Biosystems, State Key Laboratory of Bioreactor Engineering, East China University of Science & Technology, Shanghai 200237, China
| | | |
Collapse
|
48
|
Greenberg MM. Attachment of reporter and conjugate groups to the 3' termini of oligonucleotides. ACTA ACUST UNITED AC 2008; Chapter 4:Unit 4.5. [PMID: 18428852 DOI: 10.1002/0471142700.nc0405s02] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
Conjugation of oligonucleotides at the 3 terminus is less common because this site is used for covalent linkage to solid-phase oligonucleotide synthesis supports. However, 3-oligonucleotide conjugates have several valuable physicochemical properties, including their ability to stabilize nucleic acid hybridization complexes and to retard the activity of exonucleases. This unit discusses methods for preparing oligonucleotides conjugated at the 3 terminus.
Collapse
Affiliation(s)
- M M Greenberg
- Colorado State University, Fort Collins, Colorado, USA
| |
Collapse
|
49
|
Schwartz DE, Gong P, Shepard KL. Time-resolved Förster-resonance-energy-transfer DNA assay on an active CMOS microarray. Biosens Bioelectron 2008; 24:383-90. [PMID: 18515059 DOI: 10.1016/j.bios.2008.04.015] [Citation(s) in RCA: 29] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/07/2008] [Revised: 04/15/2008] [Accepted: 04/17/2008] [Indexed: 11/16/2022]
Abstract
We present an active oligonucleotide microarray platform for time-resolved Förster-resonance-energy-transfer (TR-FRET) assays. In these assays, immobilized probe is labeled with a donor fluorophore and analyte target is labeled with a fluorescence quencher. Changes in the fluorescence decay lifetime of the donor are measured to determine the extent of hybridization. In this work, we demonstrate that TR-FRET assays have reduced sensitivity to variances in probe surface density compared with standard fluorescence-based microarray assays. Use of an active array substrate, fabricated in a standard complementary metal-oxide-semiconductor (CMOS) process, provides the additional benefits of reduced system complexity and cost. The array consists of 4096 independent single-photon avalanche diode (SPAD) pixel sites and features on-chip time-to-digital conversion. We demonstrate the functionality of our system by measuring a DNA target concentration series using TR-FRET with semiconductor quantum dot donors.
Collapse
Affiliation(s)
- David Eric Schwartz
- Department of Electrical Engineering, Bioelectronic Systems Laboratory, Columbia University, NY 10027, USA.
| | | | | |
Collapse
|
50
|
A multidisciplinary approach for molecular diagnostics based on biosensors and microarrays. Ing Rech Biomed 2008. [DOI: 10.1016/j.rbmret.2007.12.008] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
|