UV light and Fe2+ catalysed COD removal of AO 8 using NaOCl as oxidant

The present study aims to establish NaOCl as a potential oxidant in the COD removal of Acid Orange 8 using UVC light (λ = 254 nm) and Fe2+ as catalysts. The different systems used in this study are NaOCl, Fe2+/NaOCl, UV/NaOCl, and Fe2+/NaOCl/UV. All these process were found to be operative in acidic, neutral and basic medium. The initial decolorisation and COD removal efficiency (CODeff) for different systems follow the order: Fe2+/NaOCl/UV > UV/NaOCl > Fe2+/NaOCl > NaOCl. Nevertheless, NaOCl can alone be used in the treatment process considering its CODeff to the extent of 95% in 90 min. The change in pH of the solutions after treatment is an important observation - for non-UV systems it remained around 11.0 and 7.0 in other systems. Thus, UV systems are environmental benign. The effect of various anions on CODeff was tested in Fe2+ systems. Presence of F- ions were found to accelerate CODeff in both the systems. However, the effect is more pronounced in Fe2+/ NaOCl/UV, where complete CODeff was observed in the presence of 9.0 gl-1 of F-. The COD removal kinetics for all systems was studied using zero-order, first-order, second-order, and BMG kinetic models. BMG model was found to be more suitable among all and is in good agreement with CODeff of all systems. It is, therefore, established that NaOCl can serve as a powerful oxidant in the advanced oxidation process.

Ultrasound-Triggered Azo Free Radicals for Cervical Cancer Immunotherapy

PD-1 blockade is a first-line treatment for recurrent/metastatic cervical cancer but benefits only a small number of patients due to low preexisting tumor immunogenicity. Using immunogenic cell death (ICD) inducers is a promising strategy for improving immunotherapy, but these compounds are limited by the hypoxic environment of solid tumors. To overcome this issue, the nanosensitizer AIBA@MSNs were designed based on sonodynamic therapy (SDT), which induces tumor cell death under hypoxic conditions through azo free radicals in a method of nonoxygen radicals. Mechanistically, the azo free radicals disrupt both the structure and function of tumor mitochondria by reversing the mitochondrial membrane potential and facilitating the collapse of electron transport chain complexes. More importantly, the AIBA@MSN-based SDT serves as an effective ICD inducer and improves the antitumor immune capacity. The combination of an AIBA@MSN-based SDT with a PD-1 blockade has the potential to improve response rates and provide protection against relapse. This study provides insights into the use of azo free radicals as a promising SDT strategy for cancer treatment and establishes a basic foundation for nonoxygen-dependent SDT-triggered immunotherapy in cervical cancer treatment.

Understanding the Fast-Triggering Unfolding Dynamics of FK-11 upon Photoexcitation of Azobenzene

Photoswitchable molecules can control the activity and functions of biomolecules by triggering conformational changes. However, it is still challenging to fully understand such fast-triggering conformational evolution from nonequilibrium to equilibrium distribution at the molecular level. Herein, we successfully simulated the unfolding of the FK-11 peptide upon the photoinduced trans-to-cis isomerization of azobenzene based on the Markov state model. We found that the ensemble of FK-11 contains five conformational states, constituting two unfolding pathways. More intriguingly, we observed the microsecond-scale conformational propagation of the FK-11 peptide from the fully folded state to the equilibrium populations of the five states. The computed CD spectra match well with the experimental data, validating our simulation method. Overall, our study not only offers a protocol to study the photoisomerization-induced conformational changes of enzymes but also could orientate the rational design of a photoswitchable molecule to manipulate biological functions.

Enhanced degradation of Direct Red 80 dye via Fenton-like process mediated by cobalt ferrite: generated superoxide radicals and singlet oxygen

Azo dyes, widely used in the textile industry, contribute to effluents with significant organic content. Therefore, the aim of this work was to synthesize cobalt ferrite (CoFe2O4) using the combustion method and assess its efficacy in degrading the azo dye Direct Red 80 (DR80). TEM showed a spherical structure with an average size of 33 ± 12 nm. Selected area electron diffraction and XRD confirmed the presence of characteristic crystalline planes specific to CoFe2O4. The amount of Co and Fe metals were determined by ICP-OES, indicating an n(Fe)/n(Co) ratio of 2.02. FTIR exhibited distinct bands corresponding to Co-O (455 cm-1) and Fe-O (523 cm-1) bonds. Raman spectroscopy detected peaks associated with octahedral and tetrahedral sites. For the first time, the material was applied to degrade DR80 in an aqueous system, with the addition of persulfate. Consistently, within 60 min, these trials achieved nearly 100% removal of DR80, even after the material had undergone five cycles of reuse. The pseudo-second-order model was found to be the most fitting model for the experimental data (k2 = 0.07007 L mg-1 min-1). The results strongly suggest that degradation primarily occurred via superoxide radicals and singlet oxygen. Furthermore, the presence of UV light considerably accelerated the degradation process (k2 = 1.54093 L mg-1 min-1). The material was applied in a synthetic effluent containing various ions, and its performance consistently approached 100% in the photo-Fenton system. Finally, two degradation byproducts were identified through HPLC-MS/MS analysis.

Synergistic effect of Fenton oxidation and adsorption process in treatment of azo printing dye: DSD optimization and reaction mechanism interpretation

The main challenges to overcome within the Fenton process are the acidic pH as an optimal reaction condition, sludge formation in neutral pH medium and high toxicity of treated printing wastewater due to the generation of contaminating by-products. This research discusses the catalytic activity of homogeneous (FeSO4/H2O2) and heterogeneous (Fe2(MoO4)3/H2O2) Fenton processes in treatment of Yellow azo printing dye in synthetic aqueous solution and real printing effluent, with an integration of adsorption on functionalized biochar synthesized from wild plum kernels. The definitive screening design (DSD), was used to design the experiment. Independent variables were initial dye concentration (20-180 mg L-1), iron concentration (0.75-60 mg L-1), pH (2-10) and hydrogen peroxide concentration (1-11 mM). Higher decolourization efficiency of 79% was obtained within homogeneous Fenton treatment of printing wastewater, in comparison to heterogeneous Fenton treatment (54%), after a reaction time of 60 min. Same trend of mineralization degree was established: COD removal was 59% and 33% for homogeneous and heterogeneous Fenton process, respectively. The application of adsorption treatment has achieved significant advantages in terms of toxicity reduction (95%) and decolourization efficiency (90% of TOC removal and 22% of dye removal) of treated samples, even at neutral pH medium. Degradation mechanisms within Fenton and adsorption processes were proposed based on the qualitative gas chromatography/mass spectrometry analysis, physico-chemical properties of dye degradation products and functionalized biochar. Overall, the homogeneous Fenton/adsorption combined process can be potentially used as a treatment to remove azo dyes from contaminated water.

Probing the interaction mechanisms between sunset yellow dye and trypsin protein leading to amorphous aggregation under low pH conditions

Protein aggregation poses a significant concern in the field of food sciences, and various factors, such as synthetic food dyes, can contribute to protein aggregation. One such dye, Sunset Yellow (SY), is commonly employed in the food industry. Trypsin was used as a model protein to assess the impact of SY. We employed several biophysical techniques to examine the binding and aggregation mechanisms between SY and trypsin at different pHs. Results from intrinsic fluorescence measurements indicate a stronger interaction between SY and trypsin at pH 2.0 compared to pH 6.0. Turbidity data reveal trypsin aggregation in the presence of 0.05-3.0 mM SY at pH 2.0, while no aggregation was observed at pH 6.0. Kinetic data demonstrate a rapid, lag-phase-free SY-induced aggregation of trypsin. Circular dichroism analysis reveals that trypsin adopts a secondary structure in the presence of SY at pH 6.0, whereas at pH 2.0, the secondary structure was nearly lost with increasing SY concentrations. Furthermore, turbidity and kinetics data suggest that trypsin aggregation depends on trypsin concentrations and pH. Our study highlights potential health risks associated with the consumption of SY, providing insights into its impact on human health and emphasizing the necessity for further research in this field.

Well-Defined Oligo(azobenzene-graft-mannose): Photostimuli Supramolecular Self-Assembly and Immune Effect Regulation

The immune system can recognize and respond to pathogens of various shapes. Synthetic materials that can change their shape have the potential to be used in vaccines and immune regulation. The ability of supramolecular assemblies to undergo reversible transformations in response to environmental stimuli allows for dynamic changes in their shapes and functionalities. A meticulously designed oligo(azobenzene-graft-mannose) was synthesized using a stepwise iterative method and "click" chemistry. This involved integrating hydrophobic and photoresponsive azobenzene units with hydrophilic and bioactive mannose units. The resulting oligomer, with its precise structure, displayed versatile assembly morphologies and chiralities that were responsive to light. These varying assembly morphologies demonstrated distinct capabilities in terms of inhibiting the proliferation of cancer cells and stimulating the maturation of dendritic cells. These discoveries contribute to the theoretical comprehension and advancement of photoswitchable bioactive materials.

Decolorization and degradation of various dyes and dye-containing wastewater treatment by electron beam radiation technology: An overview

The treatment of dye-containing wastewater generated from textile industries is still a challenge, and various technologies, including physical, chemical and biological ones have been used. In recent years, the ionizing radiation (usually including gamma ray generated by radionuclide, such as 60Co and 137Cs, and electron beam generated by electron accelerator) technology has received increasing attention for degrading refractory or toxic organic pollutants in wastewater because of its unique advantages, such as no chemical additives, fast reaction rate, strong degradation capacity, high efficiency, flexibility, controllability. Compared to the conventional wastewater treatment processes, ionizing radiation technology, as a disruptive wastewater treatment technology, is more efficient for the decolorization and degradation of dyes and the treatment of dye-containing wastewater. In this paper, the recent advances in the treatment of dye-containing wastewater by ionizing radiation, in particular by electron beam (EB) radiation were summarized and analyzed, focusing on the decolorization and degradation of various dyes. Firstly, the formation of various reactive species induced by radiation and their interactions with dye molecules, as well as the influencing factors on the removal efficiency of dyes were discussed. Secondly, the researches on the treating dye-containing wastewater by electron beam radiation technology were systematically reviewed. Then, the decolorization and degradation mechanisms by electron beam radiation were further discussed in detail. And the integrated processes that would contribute to the advancement of this technology in practical applications were examined. More importantly, the recent advances of electron beam radiation technology from laboratory to application were reviewed, especially successful operation of dye-containing wastewater treatment facilities in China. And eventually, current challenges, future research directions, and outlooks of electron beam radiation technology were proposed for further advancing this technology for the sustainable development of water resources.

Compact Micropatterned Chip Empowers Undisturbed and Programmable Drug Addition in High-Throughput Cell Screening

Simultaneously adding multiple drugs and other chemical reagents to individual droplets at specific time points presents a significant challenge, particularly when dealing with tiny droplets in high-throughput screening applications. In this study, a micropatterned polymer chip is developed as a miniaturized platform for light-induced programmable drug addition in cell-based screening. This chip incorporates a porous superhydrophobic polymer film with atom transfer radical polymerization reactivity, facilitating the efficient grafting of azobenzene methacrylate, a photoconformationally changeable group, onto the hydrophilic regions of polymer matrix at targeted locations and with precise densities. By employing light irradiation, the cyclodextrin-azobenzene host-guest complexes formed on the polymer chip can switch from an "associated" to a "dissociated" state, granting precise photochemical control over the supramolecular coding system and its surface patterning ability. Significantly, the exceptional spatial and temporal control offered by these chemical transitions empowers to utilize digital light processing systems for simultaneous regulation and release of cyclodextrin-bearing drugs across numerous droplets containing suspended or adhered cells. This approach minimizes mechanical disruption while achieving precise control over the timing of addition, dosage, and integration varieties of released drugs in high-throughput screening, all programmable to meet specific requirements.

Revealing the degrading-possibility of methyl red by two azoreductases of Anoxybacillus sp. PDR2 based on molecular docking

Azo dyes, as the most widely used synthetic dyes, are considered to be one of the culprits of water resources and environmental pollution. Anoxybacillus sp. PDR2 is a thermophilic bacterium with the ability to degrade azo dyes, whose genome contains two genes encoding azoreductases (named AzoPDR2-1 and AzoPDR2-2). In this study, through response surface methodology (RSM), when the initial pH, inoculation volume and Mg2+ addition amount were 7.18, 10.72% and 0.1 g/L respectively, the decolorization rate of methyl red (MR) (200 mg/L) could reach its maximum (98.8%). The metabolites after biodegradation were detected by UV-Vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), and liquid chromatography mass spectrometry (LC-MS/MS), indicating that MR was successfully decomposed into 4-aminobenzoic acid and other small substrates. In homologous modeling, it was found that both azoreductases were flavin-dependent azoreductases, and belonged to the α/β structure, using the Rossmann fold. In their docking results with the cofactor flavin mononucleotide (FMN), FMN bound to the surface of the protein dimer. Nicotinamide adenine dinucleotide (NADH) was superimposed on the plane of the pyrazine ring between FMN and the activity pocket of protein. Besides, both azoreductase complexes (azoreductase-FMN-NADH) exhibited a substrate preference for MR. Asn104 and Tyr74 played an important role in the combination of the azoreductase AzoPDR2-1 complex and the azoreductase AzoPDR2-2 complex with MR, respectively. This provided assistance for studying the mechanism of azoreductase biodegradation of azo dyes in thermophilic bacteria.

Bidirectional Regulation of Intracellular Enzyme Activity Using Light-Driven Nano-Inhibitors

Photochemical regulation provides precise control over enzyme activities with high spatiotemporal resolution. A promising approach involves anchoring "photoswitches" at enzyme active sites to modulate substrate recognition. However, current methods often require genetic mutations and irreversible enzyme modifications for the site-specific anchoring of "photoswitches", potentially compromising the enzyme activities. Herein, we present a pioneering reversible nano-inhibitor based on molecular imprinting technique for bidirectional regulation of intracellular enzyme activity. The nano-inhibitor employs a molecularly imprinted polymer nanoparticle as its body and azobenzene-modified inhibitors ("photoswitches") as the arms. By using a target enzyme as the molecular template, the nano-inhibitor acquires oriented binding sites on its surface, resulting in a high affinity for the target enzyme and non-covalently firm anchoring of the azobenzene-modified inhibitor to the enzyme active site. Harnessing the reversible isomerization of azobenzene units upon exposure to ultraviolet and visible light, the nano-inhibitor achieves bidirectional enzyme activity regulation by precisely docking and undocking inhibitor at the active site. Notably, this innovative approach enables the facile in situ regulation of intracellular endogenous enzymes, such as carbonic anhydrase. Our results represent a practical and versatile tool for precise enzyme activity regulation in complex intracellular environments.

Optical Control of Proteasomal Protein Degradation with a Photoswitchable Lipopeptide

Photolipids have emerged as attractive tools for the optical control of lipid functions. They often contain an azobenzene photoswitch that imparts a cis double-bond upon irradiation. Herein, we present the application of photoswitching to a lipidated natural product, the potent proteasome inhibitor cepafungin I. Several azobenzene-containing lipids were attached to the cyclopeptide core, yielding photoswitchable derivatives. Most notably, PhotoCep4 exhibited a 10-fold higher cellular potency in its light-induced cis-form, matching the potency of natural cepafungin I. The length of the photolipid tail and distal positioning of the azobenzene photoswitch with respect to the macrocycle is critical for this activity. In a proteome-wide experiment, light-triggered PhotoCep4 modulation showed high overlap with constitutively active cepafungin I. The mode of action was studied using crystallography and revealed an identical binding of the cyclopeptide in comparison to cepafungin I, suggesting that differences in their cellular activity originate from switching the tail structure. The photopharmacological approach described herein could be applicable to many other natural products as lipid conjugation is common and often necessary for potent activity. Such lipids are often introduced late in synthetic routes, enabling facile chemical modifications.

Visible Light Control over the Cytolytic Activity of a Toxic Pore-Forming Protein

Enabling control over the bioactivity of proteins with light, along with the principles of photopharmacology, has the potential to generate safe and targeted medical treatments. Installing light sensitivity in a protein can be achieved through its covalent modification with a molecular photoswitch. The general challenge in this approach is the need for the use of low energy visible light for the regulation of bioactivity. In this study, we report visible light control over the cytolytic activity of a protein. A water-soluble visible-light-operated tetra-ortho-fluoro-azobenzene photoswitch was synthesized by utilizing the nucleophilic aromatic substitution reaction for installing a solubilizing sulfonate group onto the electron-poor photoswitch structure. The azobenzene was attached to two cysteine mutants of the pore-forming protein fragaceatoxin C (FraC), and their respective activities were evaluated on red blood cells. For both mutants, the green-light-irradiated sample, containing predominantly the cis-azobenzene isomer, was more active compared to the blue-light-irradiated sample. Ultimately, the same modulation of the cytolytic activity pattern was observed toward a hypopharyngeal squamous cell carcinoma. These results constitute the first case of using low energy visible light to control the biological activity of a toxic protein.

Synthesis of polymer dots as fluorescent nanoprobe for the detection of Ponceau 4R, an additive color abuse in food

Abusing organic dyes in industrial food products is an important issue in many countries. Rapid chemical sensing of these compounds can be of great importance during the industrial life of humans. In this work, we synthesized a new fluorescent polymer dot and successfully applied it as an optical probe for the detection of red color abuse in foodstuffs. Ponceau 4R is a red organic dye additive that is used in some foodstuffs such as tomato sauces or pastes. It is too hazardous to human health. Detection of such abusage is challenging. The development of π-conjugated polymer dots having a bright emission band at visible can be a promising probe for the detection of food color additives. A variety of methods and monomers were previously used for their synthesis. Here, the Suzuki Coupling method was employed. The limit of detection (LOD) of the method was obtained 16 nmol L-1 for the detection of Ponceau 4R.

UV light assisted degradation of acid orange azo dye by ZVI-ZnS and effluent toxicity effects

Azo dyes, the most common synthetic dyes used in the textile industry, are known xenobiotic compounds and recalcitrant to conventional degradation treatments. As consequence, such contaminants are often discharged into the effluents, treating aquatic ecosystems. Among several processes, the use of zero valent iron (ZVI) represents a suitable alternative to degrade organic molecules containing azo bonds. However, its applications are limited by corrosion and loss of reactivity over the time. To overcome these constraints, ZVI has been coupled to a suitable semiconductor (ZnS) to get a catalytic composite (ZVI-ZnS) active under UV light. The present work deals with the degradation of acid orange (AO7), used as model azo dye, by UV/ZVI-ZnS, as one step treatment and in combination with an adsorption process by biochar. The influence of ZVI-ZnS concentration (0.25, 0.5, 1 and 2 g/L) and reaction time (0-160 min) on degradation of AO7 were investigated. Intermediates formation was monitored by ESI-FT-ICR-MS analysis and the effluent toxicity was assessed by using Artemia franciscana. The experimental results showed that the UV/ZVI-ZnS process at 1 g/L of catalyst allowed to achieve a removal of AO7 up to 97% after 10 min. An increase of the dye relative concentrations as well as the toxicity related to intermediates formations has been observed for treatment time higher than 10 min. The total removal of AO7 together with effluent toxicity reduction was obtained only after the combined treatment (UV/ZVI-ZnS + biochar).

An efficient CuZr-based metallic glasses electrode material for electrocatalytic degradation of azo dyes

Metallic glasses have received a lot of attention on wastewater treatment due to their unique atomic structure, and the use of metallic glasses as electrodes has produced unexpected electrocatalytic degradation effects for many pollutants through combining with electrochemical technology. However, it still is a formidable challenge to find a metallic glass electrode material with both efficient and clean for the catalytic degradation of pollutants. In this work, the Cu55Zr45 metallic glassy ribbons are used as an electrode to degrade azo dyes and show the excellent degradation effect, which can reach 95.6% within 40 min. In the degradation process, almost no additives are produced and Cu55Zr45 metallic glassy ribbons have excellent effects under different pH conditions. Meanwhile, it exhibits good stability for degradation efficiency during the 8 cycle degradation tests of the amorphous alloy electrode. When the copper nanoparticles are exposed on the surface of the ribbons, the oxidized copper obtained synergistically produce activated radicals is the primary degradation mechanism, where the auxiliary degradation mechanisms include electron transfer and the promotion of active chlorine. This research develops a new type of electrode material for wastewater treatment, and the economy and high efficiency of Cu55Zr45 metallic glass endow it the expandable functional applications.

Microbial communities drive flux of acid orange 7 and crystal violet dyes in water-sediment system

Unchecked dye effluent discharge poses escalating environmental and economic concerns, especially in developing nations. While dyes are well-recognized water pollutants, the mechanisms of their environmental spread are least understood. Therefore, the present study examines the partitioning of Acid Orange 7 (AO7) and Crystal Violet (CV) dyes using water-sediment microcosms and reports that native microbes significantly affect AO7 decolorization and transfer. Both dyes transition from infused to pristine matrices, reaching equilibrium in a fortnight. While microbes influence CV partitioning, their role in decolorization is minimal, emphasizing their varied impact on the environmental fate of dyes. Metagenomic analyses reveal contrasting microbial composition between control and AO7-infused samples. Control water samples displayed a dominance of Proteobacteria (62%), Firmicutes (24%), and Bacteroidetes (9%). However, AO7 exposure led to Proteobacteria reducing to 57% and Bacteroidetes to 3%, with Firmicutes increasing to 34%. Sediment samples, primarily comprising Firmicutes (47%) and Proteobacteria (39%), shifted post-AO7 exposure: Proteobacteria increased to 53%, and Firmicutes dropped to 38%. At the genus level, water samples dominated by Niveispirillum (34%) declined after AO7 exposure, while Bacillus and Pseudomonas increased. Notably, Serratia and Sphingomonas, known for azo dye degradation, rose post-exposure, hinting at their role in AO7 decolorization. Conversely, sediment samples showed a decrease in the growth of Bacillus and an increase in that of Pseudomonas and Serratia. These findings emphasize the significant role of microbial communities in determining the environmental fate of dyes, providing insights on its environmental implications and management.

Toxic effects and mechanisms of cationic blue SD-GSL on Chlorella vulgaris before and after the biological decolorization process

Biodegradation is regarded as an efficient way to decolorize azo dyes. However, the changes in the algal toxicity of azo dyes during biodecolorization are still unclear. In this study, the physiological responses of Chlorella vulgaris to the hydrophobic and hydrophilic components of cationic blue SD-GSL (a typical monoazo dye) and its biodecolorization products were investigated. The toxicity of each component to Chlorella vulgaris and the sources of the toxicity were analyzed. The cationic blue SD-GSL components inhibited the algal cell division and superoxide dismutase (SOD) activity at all concentrations, and inhibited the synthesis of chlorophyll-a (Chl-a) at concentrations >100 mg/L, whereas increased the malondialdehyde (MDA) content. The hydrophobic and hydrophilic components of its biodecolorization products had enhanced inhibition rates on cell density (10.7% and 15.6%, respectively), Chl-a content (31.2% and 8.4%, respectively), and SOD activity (13.5% and 1.9%, respectively) of Chlorella vulgaris, and further stimulated an increase in MDA content (4.4% and 7.0%, respectively), indicating that the biodecolorization products were more toxic than the pristine dye. Moreover, the toxic effect of hydrophobic components on Chlorella vulgaris was stronger than that of hydrophilic components. The sensitivity sequence of Chlorella vulgaris to the toxicity of cationic blue SD-GSL and its biodecolorization product components was: Chl-a synthesis > SOD activity > cell division. SUVA analysis and 3D-EEM analysis revealed that the enhanced algal toxicity of the biodecolorization products of cationic blue SD-GSL was attributed to the aromatic compounds, which were mainly concentrated in the hydrophobic components. UPLC-Q-TOF-MS was used to verify dye biodecolorization byproducts. The information obtained from this study helps to understand the decolorization products toxicities of the biologically treated azo dyes, thereby providing new insights into the environmental safety of textile wastewater after traditional biological treatment.

Synthesis of novel azo pyrazole disperse dyes for dyeing and antibacterial finishing of PET fabric under supercritical carbon dioxide

Supercritical carbon dioxide (scCO2) has been suggested as a good substitution to environmentally harmful water-based tincturing. The present study describes the successful synthesis of some biologically active dispersion tinctures for supercritical carbon dioxide tincturing of polyester fabric. The coupling of 1-cyanoacetylpiperidine (1) with the diazonium salt of aryl amine derivatives (2a-d) produced 1-((aryldiazenyl) cyanoacetyl piperidines (3a-d). To create the derivatives of 4-(phenyldiazenyl)-5-(piperidin-1-yl)-1H-pyrazol-3-amine (5a), the propane nitriles (3a-d) were condensed with hydrazine hydrate. However, the unexpected 3-aminopyrazol-5-ol yellow-red dispersion dyes (4a-d) were identified as the reaction results. The MS, IR, and NMR spectra were used to describe the novel dyes, and the results exactly matched the suggested structures. The antibacterial test, which was conducted using the AATCC method, revealed that some of the compounds (3a-d) and (4a-d) had impressive antibacterial capabilities against the researched +ve and gram -ve bacteria. For eight dyestuffs, the dyeability, color strength, and color fastness of the tincturing process were evaluated. The evaluation focused on determining color uptake using a gauge for color strength (K/S). All dyes displayed excellent rubbing, washing, and light fastness (color change and staining grade of 4-5).

Modeling sunset yellow removal from fruit juice samples by a novel chitosan-nickel ferrite nano sorbent

Analysis of food additives is highly significant in the food industry and directly related to human health. This investigation into the removal efficiency of sunset yellow as an azo dye in fruit juices using Chitosan-nickel ferrite nanoparticles (Cs@NiFe2O4 NPs). The nanoparticles were synthesized and characterized using various techniques. The effective parameters for removing sunset yellow were optimized using the response surface methodology (RSM) based on the central composite design (CCD). Under the optimum conditions, the highest removal efficiency (94.90%) was obtained for the initial dye concentration of 26.48 mg L-1 at a pH of 3.87, a reaction time of 67.62 min, and a nanoparticle dose of 0.038 g L-1. The pseudo-second-order kinetic model had a better fit for experimental data (R2 = 0.98) than the other kinetic models. The equilibrium adsorption process followed the Freundlich isotherm model with a maximum adsorption capacity of 212.766 mg g-1. The dye removal efficiency achieved for industrial and traditional fruit juice samples (91.75% and 93.24%), respectively, confirmed the method's performance, feasibility, and efficiency. The dye adsorption efficiency showed no significant decrease after five recycling, indicating that the sorbent has suitable stability in practical applications. variousThe synthesized nanoparticles can be suggested as an efficient sorbent to remove the sunset yellow dye from food products.

Reconstitution of the Final Steps in the Biosynthesis of Valanimycin Reveals the Origin of Its Characteristic Azoxy Moiety

Valanimycin is an azoxy-containing natural product isolated from the fermentation broth of Streptomyces viridifaciens MG456-hF10. While the biosynthesis of valanimycin has been partially characterized, how the azoxy group is constructed remains obscure. Herein, the membrane protein VlmO and the putative hydrazine synthetase ForJ from the formycin biosynthetic pathway are demonstrated to catalyze N-N bond formation converting O-(l-seryl)-isobutyl hydroxylamine into N-(isobutylamino)-l-serine. Subsequent installation of the azoxy group is shown to be catalyzed by the non-heme diiron enzyme VlmB in a reaction in which the N-N single bond in the VlmO/ForJ product is oxidized by four electrons to yield the azoxy group. The catalytic cycle of VlmB appears to begin with a resting μ-oxo diferric complex in VlmB, as supported by Mössbauer spectroscopy. This study also identifies N-(isobutylamino)-d-serine as an alternative substrate for VlmB leading to two azoxy regioisomers. The reactions catalyzed by the kinase VlmJ and the lyase VlmK during the final steps of valanimycin biosynthesis are established as well. The biosynthesis of valanimycin was thus fully reconstituted in vitro using the enzymes VlmO/ForJ, VlmB, VlmJ and VlmK. Importantly, the VlmB-catalyzed reaction represents the first example of enzyme-catalyzed azoxy formation and is expected to proceed by an atypical mechanism.

Decolorization, degradation and detoxification of mutagenic dye Methyl orange by novel biofilm producing plant growth-promoting rhizobacteria

Discharge of untreated dyeing wastewater nearby water-bodies is one of major causes of water pollution. Generally, bacterial strains isolated from industrial effluents and/or contaminated soils are used for the bioremediation of Methyl orange (MO), a mutagenic recalcitrant mono-azo dye, used in textiles and biomedical. However, MO degradation by biofilm producing plant growth-promoting rhizobacteria (BPPGPR) was not studied yet. In this study, 19 out of 21 BPPGPR strains decolorized 96.3-99.9% and 89.5-96.3% MO under microaerophilic and aerobic conditions, respectively from Luria-Bertani broth (LBB) followed by yeast-extract peptone and salt-optimized broth plus glycerol media within 120 h of incubation at 28 °C. Only selected BPPGPR including Pseudomonas fluorescens ESR7, P. veronii ESR13, Stenotrophomonas maltophilia ESR20, Staphylococcus saprophyticus ESD8, and P. parafulva ESB18 were examined for process optimization of MO decolorization using a single factor optimization method. This study showed that under optimal conditions (e.g., LBB, 100 mg L-1 MO, pH 7, incubation of 96 h, 28 °C), these strains could remove 99.1-99.8% and 97.6-99.5% MO under microaerophilic and aerobic conditions, respectively. Total azoreductase and laccase activities responsible for biodegradation were also remarkably activated in the biodegraded samples under optimal conditions, while these activities were repressed under unfavorable conditions (e.g., 40 °C and 7.5% NaCl). This study confirmed that MO was degraded and detoxified by these bacterial strains through breakage of azo bond. So far, this is the first report on bioremediation of MO by the BPPGPR strains. These BPPGPR strains are highly promising to be utilized for the bioremediation of dyeing wastewater in future.

Visualization of the Dynamics of Photoinduced Crawling Motion of 4-(Methylamino)Azobenzene Crystals via Diffracted X-ray Tracking

The photoinduced crawling motion of crystals is a continuous motion that azobenzene molecular crystals exhibit under light irradiation. Such motion enables object manipulation at the microscale with a simple setup of fixed LED light sources. Transportation of nano-/micromaterials using photoinduced crawling motion has recently been reported. However, the details of the motion mechanism have not been revealed so far. Herein, we report visualization of the dynamics of fine particles in 4-(methylamino)azobenzene (4-MAAB) crystals under light irradiation via diffracted X-ray tracking (DXT). Continuously repeated melting and recrystallization of 4-MAAB crystals under light irradiation results in the flow of liquid 4-MAAB. Zinc oxide (ZnO) particles were introduced inside the 4-MAAB crystals to detect diffracted X-rays. The ZnO particles rotate with the flow of liquid 4-MAAB. By using white X-rays with a wide energy width, the rotation of each zinc oxide nanoparticle was detected as the movement of a bright spot in the X-ray diffraction pattern. It was clearly shown that the ZnO particles rotated increasingly as the irradiation light intensity increased. Furthermore, we also found anisotropy in the rotational direction of ZnO particles that occurred during the crawling motion of 4-MAAB crystals. It has become clear that the flow perpendicular to the supporting film of 4-MAAB crystals is enhanced inside the crystal during the crawling motion. DXT provides a unique means to elucidate the mechanism of photoinduced crawling motion of crystals.

Electrochemical oxidation of azo dyes degradation by RuO2-IrO2-TiO2 electrode with biodegradation Aeromonas hydrophila AR1 and its degradation pathway: An integrated approach

Azo dyes are the most varied class of synthetic chemicals with non-degradable characteristics. They are complex compounds made up of many different parts. It was primarily utilized for various application procedures in the dyeing industry. Therefore, it's crucial to develop an economical and environmentally friendly approach to treating azo dyes. Our present investigation is an integrated approach to the electrooxidation (EO) process of azo dyes using RuO2-IrO2-TiO2 (anode) and titanium mesh (cathode) electrodes, followed by the biodegradation process (BD) of the treated EO dyes. Chemical oxygen demand (COD) removal efficiency as follows MB (55%) ≥ MR (45%) ≥ TB (38%) ≥ CR (37%) correspondingly. The fragment generated during the degradation process which was identified with high-resolution mass spectrometry (HRMS) and its degradation mechanism pathway was proposed as demethylation reaction and N-N and C-N/C-S cleavage reaction occurs during EO. In biodegradation studies by Aeromonas hydrophila AR1, the EO treated dyes were completely mineralized aerobically which was evident by the COD removal efficiency as MB (98%) ≥ MR (92.9%) ≥ TB (88%) ≥ CR (87%) respectively. The EO process of dyes produced intermediate components with lower molecular weights, which was effectively utilized by the Aeromonas hydrophila AR1 and resulted in higher degradation efficiency 98%. We reported the significance of the enhanced approach of electrochemical oxidation with biodegradation studies in the effective removal of the pollutants in dye industrial effluent contaminated water environment.

Insights into the structures and properties of dyes in the Fenton catalytic process for treating wastewater effluent

A notable level of apprehension exists over the adverse impacts of dye pollution on aquatic ecosystems and human well-being. The primary objective of this research is to assess the effectiveness of Fenton catalytic reactions in degrading 14 different commercial azo dyes (both single and double) present in aqueous solutions. The investigation focused on the function of dye structures, using a combination of experimental data and examination of theoretical factors. Dye degradation process was carried out at pH 3, and the concentrations of Fe2+ (10-4  mol/L), H2 O2 (2 × 10-3  mol/L), and dye (0.05 g/L). The findings revealed that dyes with a larger molecular weight were more effective at degrading (D%), with the overall degradation efficiency varying from 0% to 94%. Functional groups played an important role in degradation efficiency; for example, dyes with higher aromatic rings led to less D%, while a higher number of sulfonic, methyl, and nitro groups was responsible for better D%. Notably, the presence of OH groups in the backbone of dyes (AB 24, ABE 113, and MB 9) formed the Fe complex during the catalytic process, and the D% was minimal. On the other hand, theoretical quantum calculations such as the greater the JCLogP, highest occupied molecular orbital, and Dipole moment value, the higher the degradation efficiency. And dyes with low lowest unoccupied molecular orbital tended to have a better degradation efficiency. To some extent, UV-Vis spectral analysis was investigated to determine the degradation pathway, and the pseudo-second-order kinetic model fitted better in the degradation process. The overall experimental and theoretical findings suggested that dye degradation efficiency by the Fenton process is structure-dependent. PRACTITIONER POINTS: Insights into the role of azo dye structures-properties on degradation efficiency. Higher molecular weight and sulfonic groups containing dyes showed better degradation efficiency. Hydroxyl groups play the formation of the Fe complex during the degradation process. Higher values of HOMO and lower values of LUMO enhanced degradation efficiency. The pseudo-second-order (PSO) kinetic model obeyed the Fenton process.

Anaerobic biodegradation of azo dye reactive black 5 by a novel strain Shewanella sp. SR1: Pathway and mechanisms

The efficiency of microbial populations in degrading refractory pollutants and the impact of adverse environmental factors often presents challenges for the biological treatment of azo dyes. In this study, the genome analysis and azo dye Reactive Black 5 (RB5) degrading capability of a newly isolated strain, Shewanella sp. SR1, were investigated. By analyzing the genome, functional genes involved in dye degradation and mechanisms for adaptation to low-temperature and high-salinity conditions were identified in SR1. The addition of co-substrates, such as glucose and yeast extract, significantly enhanced RB5 decolorization efficiency, reaching up to 87.6%. Notably, SR1 demonstrated remarkable robustness towards a wide range of NaCl concentrations (1-30 g/L) and temperatures (10-30 °C), maintaining efficient decolorization and high biomass concentration. The metabolic pathways of RB5 degradation were deduced based on the metabolites and genes detected in the genome, in which the azo bond was first cleaved by FMN-dependent NADH-azoreductase and NAD(P)H-flavin reductase, followed by deamination, desulfonation, and hydroxylation mediated by various oxidoreductases. Importantly, the degradation metabolites exhibited reduced toxicity, as revealed by toxicity analysis. These findings highlighted the great potential of Shewanella sp. SR1 for bioremediation of wastewaters contaminated with azo dyes.

Catalytic degradation of crystal violet and methyl orange in heterogeneous Fenton-like processes

Metals-loaded (Fe3+, Cu2+ and Zn2+) activated carbons (M@AC) with different loading ratios (0.1%, 0.5%, 1%, 5% and 10%) were prepared and employed for catalytic degradation of dye model compounds (crystal violet (CV) and methyl orange (MO)) in wastewater by heterogeneous Fenton-like technique. Compared with Cu@AC and Zn@AC, 0.5% Fe3+ loaded AC (0.5Fe@AC) had better catalytic activity for dyes degradation. The effects of dyes initial concentration, catalyst dosage, pH and hydrogen peroxide (H2O2) volume on the catalytic degradation process were investigated. Cyclic performance, stability of 0.5Fe@AC and iron leaching were explored. Degradation kinetics were well fitted to the pseudo-second-order model (Langmuir-Hinshelwood). Almost complete decolorization (99.7%) of 400 mg L-1 CV was achieved after 30 min reaction under the conditions of CV volume (30 mL), catalyst dosage (0.05 g), H2O2 volume (1 mL) and pH (7.7). Decolorization of MO reached 98.2% under the same conditions. The abilities of pyrolysis char (PC) of dyeing sludge (DS) and metal loaded carbon to remove dye pollutants were compared. The intermediate products were analyzed and the possible degradation pathway was proposed. This study provided an insight into catalytic degradation of triphenylmethane- and aromatic azo-based substances, and utilization of sludge char.

Simultaneous microbial electrochemical degradation of methyl orange and bioelectricity generation using coculture as anode inoculum in a microbial fuel cell

Methyl Orange, an azo dye, is a widely used colouring agent in the textile industry. The study aimed to investigate the efficiency of bioremediating bacteria in degrading methyl orange. Escherichia coli (E. coli), a Methyl Orange-degrading bacterium, was isolated from cow dung and its biochemical properties were analysed using 16S rRNA sequencing, and MALDI-TOF MS. A pre-cultured strain of Pseudomonas aeruginosa was co-cultured with E. coli in 1:1 ration in a microbial fuel cell (MFC) for simultaneous electricity production and methyl orange degradation. The degradation was combined with biological wastewater treatment at varying Methyl Orange concentrations, and the electrochemical characteristics were analysed through polarisation study, cyclic voltammetry, and electrochemical impedance spectroscopy. The impact of parameters such as anolyte pH, dye concentration, incubation time, and substrate concentrations were also studied. This study confirmed E. coli as an effective methyl orange degrading bacteria with a maximum % degradation efficiency of 98% after 48 h incubation at pH 7.0. The co-culture of isolated microorganisms at 250 mg/L of methyl orange concentration showed a maximum power density 6.5 W/m3. Further, anode modification with Fe2O3 nanoparticles on the anode surface enhanced power production to 11.2 W/m3, an increase of 4.7 W/m3.

Multi-factorial investigation of the effect of biochar of the secondary medicinal residue of snow lotus on the adsorption of two azo dyes, methyl red and methyl orange

Azo dye residues pollute water, which are difficult to decompose, and posing a major threat to the ecological environment. The residues of Chinese medicine still have many possibilities for use after its medicinal value has been brought into play. In this study, secondary residue biochar activation (Na2 CO3 -modified, SBA) and secondary residue biochar (unmodified, SBC) were prepared from the secondary residue of snow lotus at 200-600°C. Surface features were obtained by Brunauer-Emmett-Teller N2 method and combined with scanning electron microscopy, and their structures were analyzed by x-ray diffraction spectroscopy, Fourier infrared and near-infrared spectroscopy. The effects of five factors, including initial concentration, contact time and adsorption temperature and so forth, on the adsorption of methyl red (MR) and methyl orange (MO) solutions were investigated. Results showed that the biochar yield, specific surface area, and pore size increased after modification. modification promoted the formation of the internal structure aromatization and oxygen-containing functional groups. Adsorption experiments showed that the surroundings pH = 8, the dyes adsorption concentration of 8 mg/L, adsorption temperature of 20-40°C and time of about 1 h were more stable. Under the condition, the removal of MO by SBA could reach approximately 60%-80% (480-640 mg/g), while the removal of MR could reach more than 90% (>720 mg/g).The charcoal prepared and modified under high temperature conditions was more effective for MO adsorption, while MR relied on low temperature effectively. This study provides a new choice of adsorbent for MR and MO and finds a new direction for the utilization of snow lotus residues.

Thermal/Blue Light Induced Cross-Linking of Acrylic Coatings with Diazo Compounds

The thermal curing of industrial coatings (e.g., car painting and metal coil coatings) is accompanied by a substantial energy consumption due to the intrinsically high temperatures required during the curing process. Therefore, the development of new photochemical curing processes-preferably using visible light-is in high demand. This work describes new diazo-based cross-linkers that can be used to photocure acrylic coatings using blue light. This work demonstrates that the structure of the tethered diazo compounds influences the cross-linking efficiency, finding that side reactions are suppressed upon engineering greater molecular flexibility. Importantly, this work shows that these diazo compounds can be employed as either thermal or photochemical cross-linkers, exhibiting identical crosslinking performances. The performance of diazo-cross-linked coatings is evaluated to reveal excellent water resistance and demonstrably similar material properties to UV-cured acrylates. These studies pave the way for further usage of diazo-functionalized cross-linkers in the curing of paints and coatings.

Design, Synthesis and Second-Order Nonlinear Optical Properties of Azobenzene-Based Polysiloxanes

To study the effect of polymeric structures on second-order nonlinear optical properties, polysiloxanes materials based on azobenzene as chromophore have been designed and synthesized successfully. Herein, the siloxane monomer is directly bonded to azobenzene units by palladium catalysis, which avoids the influence of flexible chains on the photoelectric properties of azobenzene. According to the different positions of azobenzene units in the polymers, it is divided into side-chain, main-chain, and alternative-type polymers. The chemical structures of obtained polysiloxanes are confirmed by nuclear magnetic resonance spectra and mass spectra. Three polymers present high thermal decomposition temperatures and the medium glass transition temperatures. The effects of polymeric structures on the second-order nonlinear properties are compared. The main-chain polysiloxane possesses the highest thermal stability because of its rigid architecture. The side-chain polysiloxane shows the fastest isomerization transformation rate due to the large free volume. Besides, the alternative polysiloxane displays the best second-order nonlinear performance with second harmonic generation coefficient (d33 ) value of 47.6 pm V-1 , which is 3 times higher than the side-chain one.

The Synergistic Effects between Liquid Crystal and Crystalline Phase on Photo-Responsive Elastomers toward Quick Photo-Responsive Performance

Adopting only a small amount of azobenzene molecular to design liquid crystal photo-responsive materials capable of quick response and flexible adjustability is in high demand but is challenging. Herein, azobenzenemolecules into polyurethane elastomer containing crystalline structure for preparing azobenzene liquid-crystal elastomers (ALCEs) are demonstrated and this phenomenon of the synergistic effects between liquid crystal and crystalline phase is discovered. The key point of the work is that the synthetic ALCEs can utilize the reversible isomerism capability of azobenzene molecules under light irradiation, which can pry the motion of the macromolecular crystalline region in system to realize the large macroscopic deformation of the photo-responsive behavior. Obviously, the ALCEs sample containing azobenzene molecule and polyethylene glycol crystallization can quickly bend, illuminated by ultraviolet light and rapidly straighten under green light. Under the same ultraviolet irradiation, the bending speed, final bending angle, recovery rate and recovery ratio of ALCEs are larger than that of ALCEs without any crystalline structure. This ALCEs based on the synergistic effects between liquid crystal and crystalline phase can break through the current dilemma that the application of traditional azobenzene photo-responsive materials is limited by their concentration, greatly expanding the design thought and their scope of application.

The global anaerobic metabolism regulator fnr is necessary for the degradation of food dyes and drugs by Escherichia coli

IMPORTANCE

This work has broad relevance due to the ubiquity of dyes containing azo bonds in food and drugs. We report that azo dyes can be degraded by human gut bacteria through both enzymatic and nonenzymatic mechanisms, even from a single gut bacterial species. Furthermore, we revealed that environmental factors, oxygen, and L-Cysteine control the ability of E. coli to degrade azo dyes due to their impacts on bacterial transcription and metabolism. These results open up new opportunities to manipulate the azoreductase activity of the gut microbiome through the manipulation of host diet, suggest that azoreductase potential may be altered in patients suffering from gastrointestinal disease, and highlight the importance of studying bacterial enzymes for drug metabolism in their natural cellular and ecological context.

Potential Environmental Contaminants: Exploring Hydrolyzed Dyes in Household Washing Sources and Electrochemical Degradation

Reactive dyes are often released into the environment during the washing process due to their susceptibility to hydrolysis. The hydrolysis experiment of a pure reactive dye, red 195 (RR 195), and the washing experiment of RR 195-colored fabrics (CFSCs) were carried out successively to explore the sources of hydrolyzed dyes in the washing microenvironment. Reversed-phase high-performance liquid chromatography (RP-HPLC) was used for the analysis of hydrolysis intermediates and final products of reactive red 195. The experimental results indicated that the structure of the dye washing shed is consistent with the final hydrolysate of reactive red 195, which is the main colored contaminant in washing wastewater. To eliminate the hydrolyzed dyes from the source, an electrochemical degradation device was designed. The degradation parameters, including voltage, electrolyte concentration, and dye shedding concentration are discussed in the electrochemical degradation experiment. The electrochemical degradation device was also successfully implemented and verified in a home washing machine.

Combined disposal of methyl orange and corn straw via stepwise adsorption-biomethanation-composting

Agriculture wastes have been proved to be the potential adsorbents to remove azo dye from textile wastewater, but the post-treatment of azo dye loaded agriculture waste is generally ignored. A three-step strategy including sequential adsorption-biomethanation-composting was developed to realize the co-processing of azo dye and corn straw (CS). Results showed that CS represented a potential adsorbent to remove methyl orange (MO) from textile wastewater, with the maximum MO adsorption capacity of 10.00 ± 0.46 mg/g, deriving from the Langmuir model. During the biomethanation, CS could serve as electron donor for MO decolorization and substrate for biogas production simultaneously. Though the cumulative methane yield of CS loaded with MO was 11.7 ± 2.28% lower than that of blank CS, almost complete de-colorization of MO could be achieved within 72 h. Composting could achieve the further degradation of aromatic amines (intermediates during the degradation of MO) and decomposition of digestate. After 5 days' composting, 4-aminobenzenesulfonic acid (4-ABA) was not detectable. The germination index (GI) also indicated that the toxicity of aromatic amine was eliminated. The overall utilization strategy gives novel light on the management of agriculture waste and textile wastewater.

Biowaste-derived Ni/NiO decorated-2D biochar for adsorption of methyl orange

Eco-friendly carbothermal techniques were used to synthesize nanocomposites of biowaste-derived Ni/NiO decorated-2D biochar. The use of chitosan and NiCl2 in the carbothermal reduction technique was a novelty to synthesize the Ni/NiO decorated-2D biochar composite. Potassium persulfate (PS) was found to be activated by Ni/NiO decorated-2D biochar, which is thought to oxidize organic pollutants through an electron pathway designed by the reactive complexes formed between PS and the Ni/NiO biochar surface. This activation led to the efficient oxidation of methyl orange and organic pollutants. Analyzing Ni/NiO decorated-2D biochar composite before and after the methyl orange adsorption and degradation procedure allowed us to report on the process of its elimination. The Ni/NiO biochar with PS activation showed higher efficiency than Ni/NiO decorated-2D biochar composite as this material was able to degrade over 99% of the methyl orange dye. The effects of initial methyl orange concentration, dosages effect, solution pH, equilibrium studies, kinetics, thermodynamic studies, and reusability were examined and evaluated on Ni/NiO biochar.

Photocatalytic oxidation of Reactive Red 195 by bimetallic Fe-Co catalyst: Statistical modeling and optimization via Box-Behnken design

Response surface methodology (RSM) is an effective tool for process optimization with multi-complex operational factors. The present work aims to model and optimize the photocatalytic oxidation (PCO) parameters of Reactive Red 195 (RR195) dye decoloration with the SiO2-supported Fe-Co catalyst (FCS) derived from a novel catalyst synthesis method, fluidized-bed crystallization (FBC) process, using Box-Behnken design (BBD) as the RSM statistical model. The Fe-Co@SiO2 catalyst was successfully fabricated using the FBC process, and it showed good catalytic activity and performance toward the degradation of RR195. The extent of the effects of pH, H2O2 dosage (HD), catalyst loading (CL), and operating time (t) on the decoloration of RR195 was studied. Hence, the order of variable significance follows the sequence: pH > t > CL > HD. pH has the most significant effect among the variables for RR195 decoloration. The decoloration efficiency predicted by the BBD model was 88.3% under the optimized operation conditions of initial pH of 3.15, 0.76 mM H2O2, 1.18 g L-1 FCS and 59.4 min of operating time. The actual decoloration efficiency was very close to the predicted value indicating that BBD can efficiently be utilized to optimize RR195 degradation with FCS under the PCO system.

Roles of CeO2 in preparing Ce-doped CdIn2S4 with boosted photocatalytic degradation performance for methyl orange and tetracycline hydrochloride

Element doping is considered as a feasible strategy to develop efficient photocatalysts. In this study, a Ce-doped CdIn2S4 photocatalyst was prepared through a modified coprecipitation method. During the synthesis of Ce-doped CdIn2S4, the CeO2 nanorods were gradually reduced by the decomposition products of thioacetamide (TAA), and mainly existed as Ce(III) in the supernatant. This resulted in a large increase in the specific surface area of the as-obtained products, providing more exposed active sites for the reactant. Additionally, a trace amount of Ce was doped into the lattice of the CdIn2S4, resulting in a significant effect on the band structure. By tracing the roles of CeO2 during the synthesis process, a possible reaction mechanism was proposed. Benefiting from the synergistic advantages of the structural and compositional features, the optimal sample showed enhanced photocatalytic activities for the degradation of methyl orange (94.6% within 25 min) and tetracycline hydrochloride (85.6% within 120 min). The degradation rates were 13.3 times and 2.7 times higher than that of pristine CdIn2S4. This work may provide a strategy for designing metal element doped photocatalysts with good activity for pollutant removal.

Efficient degradation of the refractory organic pollutant by underwater bubbling pulsed discharge plasma: performance, degradation pathway, and toxicity prediction

It is essential to develop an efficient technology for the elimination of refractory contaminants due to their high toxicity. In this study, a novel underwater bubbling pulsed discharge plasma (UBPDP) system was proposed for the degradation of Orange II (OII). The degradation performance experiments showed that by enhancing the peak voltage and pulse frequency, the degradation efficiency of OII increased gradually. The removal efficiencies under different air flow rates were close. Reducing OII concentration and solution conductivity could promote the elimination of OII. Compared with neutral and alkaline conditions, acidic condition was more beneficial to OII degradation. The active species including ·OH, ·O2-, 1O2, and hydrated electrons were all involved in OII degradation. The concentrations of O3 and H2O2 in OII solution were lower than those in deionized water. During discharge, the solution pH increased while conductivity decreased. The variation of UV-vis spectra with treatment time indicated the effective decomposition of OII. Possible degradation pathways were speculated based on LC-MS. The toxicity of intermediate products was predicted by the Toxicity Estimation Software Tool. Coexisting constituents including Cl-, SO42-, HCO3-, and humic acid had a negative effect on OII removal. Finally, the comparison with other technology depicted the advantage of the UBPDP system.

Efficient biocatalytic removal and algal detoxification of Direct Blue-15 by the hierarchically structured, high-performance, and recyclable laccase@yttrium phosphate hybrid nanostructures

From the environmental point of view, azo dye industrial effluent is a major public health concern due to its toxic, carcinogenic, and teratogenic characteristics. On the other hand, using enzyme-based technologies offers a promising systematic and controllable method for removing synthetic dyes from wastewater. In the present study, yttrium (Y3+) phosphate was applied for the synthesis of hybrid nanoparticles (HNPs) consisting of laccase as the green catalyst. When the association of HNPs was fixed by glutaraldehyde (GA), three-dimensional cubic structures with the regular arrangement were provided. GA increased the reusability of the fabricated hybrid nanostructures (HNSs) up to 32 successive cycles. About 85% of Direct Blue-15 was removed after a 4 h-treatment using laccase@YPO4•HNPs and laccase@GA@YPO4•HNSs. The azo dye removal data were well-fitted with a pseudo-second-order model for both types of the prepared HNSs. For the model freshwater green alga Raphidocelis subcapitata, the half maximal effective concentration (EC50) of the dye decreased 10- and 100-fold after the removal with laccase@YPO4•HNPs and laccase@GA@YPO4•HNSs, respectively. GA-treated HNSs (250 U L-1) inhibited the biofilm formation by approximately 78%, 82%, and 79% for Escherichia coli, Staphylococcus aureus, and Bacillus subtilis, respectively. Thus, the fabricated laccase@GA@YPO4•HNSs could be presented as a novel, efficient, and recyclable heterogeneous biocatalyst for wastewater treatment and clean-up.

Fabrication of magnetic chitosan-grafted salicylaldehyde/nanoclay for removal of azo dye: BBD optimization, characterization, and mechanistic study

Herein, a novel nanohybrid composite of magnetic chitosan-salicylaldehyde/nanoclay (MCH-SAL/NCLA) was hydrothermally synthesized for removal of azo dye (acid red 88, AR88) from simulated wastewater. Response surface methodology combined with the Box-Behnken design (RSM-BBD) was applied with 29 experiments to assess the impact of adsorption variables, that include A: % NCLA loading (0-50), B: MCH-SAL/NCLA dose (0.02-0.1 g/100 mL), C: pH (4-10), and time D: (10-90 min) on AR88 dye adsorption. The highest AR88 removal (75.16 %) as per desirability function was attained at the optimum conditions (NCLA loading = 41.8 %, dosage = 0.06 g/100 mL, solution pH = 4, and time = 86. 17 min). The kinetic and equilibrium adsorption results of AR88 by MCH-SAL/NCLA reveal that the process follows the pseudo-first-order and Temkin models. The MCH-SAL/NCLA composite has a maximum adsorption capacity (173.5 mg/g) with the AR88 dye. The adsorption of AR88 onto the MCH-SAL/NCLA surface is determined by a variety of processes, including electrostatic, hydrogen bonding, n-π, and n-π interactions. This research revealed that MCH-SAL/NCLA can be used as a versatile and efficient bio-adsorbent for azo dye removal from contaminated wastewater.

Controllable synthesis of Co-Al layered double hydroxides with different anionic intercalation layers for the efficient removal of methyl orange

In order to investigate the effect of the types of interlayer anions on the adsorption performance of LDHs, herein, we synthesized three cobalt-aluminum layered double hydroxides (CoAl-LDHs) with different interlayer anions (NO3-/Cl-/CO32-). The experimental results demonstrate that the CoAl-LDH (Cl-) exhibited high adsorption capacity of 1372.1 mg/g at room temperature and the fastest adsorption rate on methyl orange (MO), mainly attributed to the excellent ion exchange capacity and high specific surface area and pore volume. Furthermore, the ion exchange driven by electrostatic interaction, hydrogen bonding, and surface complexation might be the main mechanisms for MO adsorption on CoAl-LDH (Cl-) and CoAl-LDH (NO3-). However, the MO adsorption on CoAl-LDH (CO32-) was strongly pH-dependent and the optimal pH value was about 3.5. Additionally, the supramolecular structure of CoAl-LDHs-MO was formed through electrostatic interaction, hydrogen bonding, and surface complexation between the host hydroxide layers and the guest MO- after adsorption equilibrium. An in-depth understanding of the differences in the adsorption performance of three anion-intercalated CoAl-LDHs will provide opportunities for further improvement of the adsorption capacity and exhibit a bright future for the design and optimization of efficient nano-adsorbents shortly.

Azobenzene-containing surfactant directs small features of DNA thermotropic liquid crystals via bottom-up and top-down strategies

Compared to classical block copolymers, the self-assembly of small molecules shows an advantage in addressing small features. As a new type of solvent-free ionic complexes, azobenzene-containing DNA thermotropic liquid crystals (TLCs) form an assembly as block copolymers when using small DNA. However, the self-assembly behavior of such biomaterials has not been fully investigated. In this study, photoresponsive DNA TLCs are fabricated by employing an azobenzene-containing surfactant with double flexible chains. For these DNA TLCs, the self-assembly behavior of DNA and surfactants could be guided by the factors of the molar ratio of azobenzene-containing surfactant, dsDNA/ssDNA, and presence or absence of water, which addresses the bottom-up control on domain spacing of mesophase. Meanwhile, such DNA TLCs also gain top-down control on morphology via photoinduced phase change. This work would provide a strategy for regulating the small features of solvent-free biomaterials, facilitating the development of patterning templates based on photoresponsive biomaterials. STATEMENT OF SIGNIFICANCE: The relationship between nanostructure and function is attractive in the science of biomaterials. With biocompatibility and degradability, photoresponsive DNA materials in solutions have been widely studied in biological and medical areas, but they are still hard to obtain in a condensed state. The complex created with designed azobenzene-containing surfactants paves the way for obtaining condensed photoresponsive DNA materials. However, fine control of the small features of such biomaterials has not yet been achieved. In this study, we present a bottom-up strategy of controlling the small features of such DNA materials and, simultaneously, the top-down control of morphology via photoinduced phase change. This work provides a bi-directional approach to controlling the small features of condensed biomaterials.

Organic waste peel-assisted synthesis of ZnSe nanoparticles for solar-driven photocatalytic degradation of cationic and anionic dye

The environment and public health are currently being threatened by the water pollution caused by dyes. Finding eco-friendly and economically viable photocatalysts has been a hot issue in recent years, as photocatalytic dye degradation is essential for eliminating dye from contaminated water as compared to other methods because of the cost factor and efficiency in removing organic contaminants. Using un-doped ZnSe for degrading activity has very seldom been attempted up to this point. Therefore, the current research focuses on the use of zinc selenide nanomaterials, which are produced via a green synthesis process from the organic waste peels of orange and potato using the hydrothermal method, and utilizes them as photocatalysts for the degradation of dyes using sunlight as a natural source of light. The crystal structure, bandgap, and surface morphology and analysis of the synthesized materials serve as indicators of their characteristics. Citrate in orange peel-mediated synthesis assists in forming a particle size of 1.85 nm and a large surface area of 17.078 m2/g enabling more surface-active sites resulting in degradation efficiency of 97.16% and 93.61% for methylene blue and Congo red dye, respectively, which outperforms commercial ZnSe in the dye degradation. The presented work maintains overall sustainability in real-practical applications by utilizing sunlight in photocatalytic degradation activity instead of sophisticated equipment and using waste peels as a capping and stabilizing agent in the green synthesis method for the preparation of photocatalysts.

Separation of Anionic Chlorinated Dyes from Polluted Aqueous Streams Using Ionic Liquids and Their Subsequent Recycling

The effect of ionic liquids on the separation of chlorinated anionic dyes such as Mordant Blue 9 (MB9) or Acid Yellow 17 (AY17) via ion exchange has been investigated in model aqueous solutions that simulate wastewater from the textile dyeing industry. The effect of ionic liquids chemical nature on the separation efficiency of mentioned dyes has been compared. It was found that especially ionic liquid based on quaternary ammonium salts comprising two or three long alkyl chains bound to the quaternary ammonium nitrogen (typically benzalkonium chloride or Aliquat 336) are very effective for the separation of both studied MB9 and AY17 from aqueous solution. In addition, the innovative technique has been developed for the reactivation of spent ionic liquids which is based on the chemical reduction of the formed ion pairs using NaBH4/NiSO4, NaBH4/Na2S2O5 or Raney Al-Ni alloy/NaOH. Thus, only NaBH4/NiSO4 in co-action with Al-Ni alloy enables both effective reduction of the azo bond and subsequent hydrodechlorination of emerging chlorinated aromatic amines. The efficiency of tested dyes separation or regeneration of ion pairs was evaluated by determination of the absorbance at wavelength of the maximum absorbance, of the Chemical Oxidation Demand (COD), and of the Adsorbables Organically bound Halogens (AOX). The formation of ion pairs or products of reduction and hydrodechlorination of these ion pairs has been studied using the 1H NMR and LC-MS techniques.

Photoinduced bidirectional switching in lipid membranes containing azobenzene glycolipids

Following the reaction of biological membranes to external stimuli reveals fundamental insights into cellular function. Here, self-assembled lipid monolayers act as model membranes containing photoswitchable azobenzene glycolipids for investigating structural response during isomerization by combining Langmuir isotherms with X-ray scattering. Controlled in-situ trans/cis photoswitching of the azobenzene N = N double bond alters the DPPC monolayer structure, causing reproducible changes in surface pressure and layer thickness, indicating monolayer reorientation. Interestingly, for monolayers containing azobenzene glycolipids, along with the expected DPPC phase transitions an additional discontinuity is observed. The associated reorintation represents a crossover point, with the surface pressure and layer thickness changing in opposite directions above and below. This is evidence that the azobenzene glycolipids themselves change orientation within the monolayer. Such behaviour suggests that azobenzene glycolipids can act as a bidirectional switch in DPPC monolayers providing a tool to investigate membrane structure-function relationships in depth.

Electrochemical degradation of azo dye using granular activated carbon electrodes loaded with bimetallic oxides

The performance of granular activated carbon (GAC) loaded with different combinations of Fe, Co, Ni, Mn, and Ti was examined for the electrochemical degradation of an azo dye such as acid red B (AR-B). Among the bimetallic groups, the combination of Fe and Co exhibited the best degradation effect. X-ray diffraction and X-ray photoelectron spectroscopy revealed that the morphology of the catalyst is CoFe2O4, and scanning electron microscopy manifested that the catalyst is distributed on the GAC surface and holes. The initial pH, hydraulic retention time, and current intensively affected the decolourisation and degradation efficiencies of AR-B, while the electrolyte types and concentrations did not exert any considerable effect. Electron spin resonance spectroscopy indicated that strong signals of hydroxyl radicals are produced by the Fe-Co/GAC electrodes. Results from fluorescence spectroscopy and gas chromatography-mass spectrometry suggested that hydroxyl radicals preferentially attack azo bonds during the degradation of AR-B, forming a series of compounds, and these compounds are finally degraded into small molecules of organic acids, carbon dioxide, and water.

Enhanced anaerobic degradation of azo dyes by biofilms supported by novel functionalized carriers

Azo dyes are significant organic pollutants known for their adverse effects on humans and aquatic life. In this study, anthraquinone-2-sulfonate (AQS) immobilized on biochar (BC) was employed as a novel carrier in up-flow anaerobic fixed-bed reactors to induce specific biofilm formation and promote the biotransformation efficiency of azo dyes. Novel carrier-packed reactor 1 (R1) and BC-packed reactor 2 (R2) were used to treat red reactive 2 (RR2) under continuous operation for 175 days. The decolorization rates of R1 and R2 were 96-83% and 91-73%, respectively. The physicochemical characteristics and extracellular polymeric substances (EPS) of the biofilm revealed a more stable structure in R1. Furthermore, the microbial community in R1 interacted more closely with each other and contained more keystone genera. Overall, this study provides a feasible method for improving the biotransformation of azo dyes, thus providing support for practical applications in wastewater treatment projects.

Transcriptome analysis reveals self-redox mineralization mechanism of azo dyes and novel decolorizing hydrolases in Aspergillus tabacinus LZ-M

Bio-degradation is the most affordable method of azo dye decontamination, while its drawbacks such as aromatic amines accumulation and low degradation efficiency must be overcome. In this study, a novel mechanism of azo dye degradation by a fungus was discovered. At a concentration of 400 mg/L, the decolorization efficiency of Acid Red 73 (AR73) by Aspergillus tabacinus LZ-M was 90.28%. Metabolite analysis and transcriptome sequencing analysis revealed a self-redox process of AR73 degradation, where the electrons generated in carbon oxidation were transferred to the reduction of -C-N = and -NN. The metabolites, 2-hydroxynaphthalene and N-phenylnitrous amide were mineralized into CO₂ through catechol pathway and a glycolytic process. Furthermore, the mineralization ratio of dye was computed to be 31.8% by the carbon balance and electron balance. By using comparative transcriptome, a novel decoloring enzyme Ord95 was discovered in unknown genes through gene cloning. It hydrolyzed AR73 into 2-hydroxynaphthalene and N-phenylnitrous amide, containing a glutathione S-transferase domain with three arginines as key active sites. Here the new mechanism of azo dye degradation was discovered with identification of a novel enzyme in Aspergillus tabacinus LZ-M.

Non-enzymatic oligonucleotide ligation in coacervate protocells sustains compartment-content coupling

Modern cells are complex chemical compartments tightly regulated by an underlying DNA-encoded program. Achieving a form of coupling between molecular content, chemical reactions, and chassis in synthetic compartments represents a key step to the assembly of evolvable protocells but remains challenging. Here, we design coacervate droplets that promote non-enzymatic oligonucleotide polymerization and that restructure as a result of the reaction dynamics. More specifically, we rationally exploit complexation between end-reactive oligonucleotides able to stack into long physical polymers and a cationic azobenzene photoswitch to produce three different phases-soft solids, liquid crystalline or isotropic coacervates droplets-each of them having a different impact on the reaction efficiency. Dynamical modulation of coacervate assembly and dissolution via trans-cis azobenzene photo-isomerization is used to demonstrate cycles of light-actuated oligonucleotide ligation. Remarkably, changes in the population of polynucleotides during polymerization induce phase transitions due to length-based DNA self-sorting to produce multiphase coacervates. Overall, by combining a tight reaction-structure coupling and environmental responsiveness, our reactive coacervates provide a general route to the non-enzymatic synthesis of polynucleotides and pave the way to the emergence of a primitive compartment-content coupling in membrane-free protocells.