Bimetallic iron-nickel phosphide as efficient peroxymonosulfate activator for tetracycline hydrochloride degradation: Performance and mechanism

Sulfate radical-based advanced oxidation processes with (SR-AOPs) are widely employed to degrade organic pollutants due to their high efficiency, cost-effectiveness and safety. In this study, a highly active and stable FeNiP was successfully prepared by reduction and heat treatment. FeNiP exhibited high performance of peroxymonosulfate (PMS) activation for tetracycline hydrochloride (TC) removal. Over a wide pH range, an impressive TC degaradation efficiency 97.86% was achieved within 60 min employing 0.1 g/L FeNiP and 0.2 g/L PMS at room temperature. Both free radicals of SO4·-, ·OH, ·O2- and non-free radicals of 1O2 participated the TC degradation in the FeNiP/PMS system. The PMS activation ability was greatly enhanced by the cycling between Ni and Fe bimetal, and the active site regeneration was achieved due to the existence of the negatively charged Pn-. Moreover, the FeNiP/PMS system exhibited substantial TC degradation levels in both simulated real-world disturbance scenarios and practical water tests. Cycling experiments further affirmed the robust stability of FeNiP catalyst, demonstrating sustained degradation efficiency of approximately 80% even after four cycles. These findings illuminate its promising potential across natural water bodies, presenting an innovative catalyst construction approach for PMS activation in the degradation of antibiotic pollutants.

Ratiometric fluoroprobe based on Eu-MOF@Tb3+ for detecting tetracycline hydrochloride in freshwater fish and its application in rapid visual detection

Tetracycline hydrochloride (TCH), a prevalent antibiotic in aquaculture for treating bacterial infections, poses challenges for on-site detection. This study employed the reversed-phase microemulsion method to synthesize a uniform nano metal-organic framework (MOF) material, europium-benzene-p-dicarboxylic acid (Eu-BDC), doped with Tb3+ to form a dual-emission fluorescence probe. By leveraging the combined a-photoinduced electron-transfer (a-PET) and inner filter effect (IFE) mechanisms, high-sensitivity TCH detection in Carassius auratus and Ruditapes philippinarum was achieved. The detection range for TCH is 0.380-75 μM, with a low limit of detection (LOD) at 0.115 μM. Upon TCH binding, Eu-BDC fluorescence rapidly decreased, while Tb3+ fluorescence remained constant, establishing a ratiometric fluorescence change. Investigation into the TCH quenching mechanism on Eu-BDC was conducted using time-dependent density functional theory (TD-DFT) calculations and fluorescence quenching kinetic equations, suggesting a mixed quenching mechanism. Furthermore, a novel photoelectric conversion fluorescence detection device (FL-2) was developed and evaluated in conjunction with high-performance liquid chromatography-diode-array detection (HPLC-DAD). This is the first dedicated fluorescence device for TCH detection, showcasing superior photoelectric conversion performance and stability that reduces experimental errors associated with smartphone photography methods, presenting a promising avenue for on-site rapid TCH detection.

Insights into the discovery and intervention of metalloproteinase in marine hazardous jellyfish

The proliferation of toxic organisms caused by changes in the marine environment, coupled with the rising human activities along the coastal lines, has resulted in an increasing number of stinging incidents, posing a serious threat to public health. Here, we evaluated the systemic toxicity of the venom in jellyfish Chrysaora quinquecirrha at both cellular and animal levels, and found that jellyfish tentacle extract (TE) has strong lethality accompanied by abnormal elevation of blood biochemical indicators and pathological changes. Joint analysis of transcriptome and proteome indicated that metalloproteinases are the predominant toxins in jellyfish. Specially, two key metalloproteinases DN6695_c0_g3 and DN8184_c0_g7 were identified by mass spectrometry of the red blood cell membrane and tetracycline hydrochloride (Tch) inhibition models. Structurally, molecular docking and kinetic analysis are employed and observed that Tch could inhibit the enzyme activity by binding to the hydrophobic pocket of the catalytic center. In this study, we demonstrated that Tch impedes the metalloproteinase activity thereby reducing the lethal effect of jellyfish, which suggests a potential strategy for combating the health threat of marine toxic jellyfish.

N,S,O triply-doped carbon with nanotubes-interwoven nanosheets encapsulated Co nanoparticles for robust antibiotic destruction via activating peroxymonosulfate

The development of facile and effective approaches to regulate the stability and reusability of metallic Co catalytic materials towards peroxymonosulfate (PMS) activation for remediating antibiotic pollutants remains challenging. In this study, we develop a one-step pyrolysis strategy to fabricate three-dimensional porous architecture assembled with N,S,O-codoped carbon nanotube-interwoven hierarchically porous carbon nanosheets encapsulated Co nanoparticles (Co@NSOC), which serve as chainmail catalysts for stable and reusable degradation of tetracycline hydrochloride (TCH) through PMS activation. The optimal Co@NSOC-700-activated PMS system presents an excellent removal efficiency of 94.1 % for TCH within 10 min and a high cycling efficiency of 92.9 % after eight cycles. The encapsulated structure, abundant catalytic sites, superior hydrophilicity and strong magnetism contribute to the high performance. Further investigation demonstrates that both radical and nonradical pathways contribute to the TCH destruction, and 1O2 is verified as the dominant reactive substance. The possible degradation pathways and the toxicity of intermediates for TCH are evaluated. This work offers an innovative structure design and surface modulation strategy to fabricate robust catalysts towards environmental remediation.

A novel synchronous fluorescence spectrometry combined with fluorescence sensitization for the highly sensitive and simultaneous detection of enoxacin, ofloxacin and tetracycline hydrochloride residues in wastewater

The synergistic effect of sodium dodecyl sulfate (SDS) and Mg2+ could significantly enhance the fluorescence intensity of enoxacin (ENO) at λex/λem = 269.2 nm/385.6 nm, ofloxacin (OFL) at λex/λem = 290.8 nm/466.2 nm and tetracycline hydrochloride (TCH) at λex/λem = 372.6 nm/514.8 nm. Moreover, when the wavelength difference (Δλ) was chosen 135 nm, the synchronous fluorescence spectra of the three antibiotic complexes could be well separated and the interference of the samples matrix were eliminated primely. Therefore, only one synchronous fluorescence scan was needed to simultaneously determine the three antibiotics. Based on these facts, a synchronous fluorescence spectrometry combining fluorescence sensitization for highly sensitive and selective determination of ENO, OFL and TCH residues in wastewater was developed for the first time. The experimental results showed that the concentrations of ENO, OFL and TCH in the range of 0.5-550 ng mL-1, 1-1500 ng mL-1 and 10-5500 ng mL-1 showed a good linear relationship with fluorescence intensity. The limits of detection were 0.0599 ng mL-1, 0.115 ng mL-1 and 0.151 ng mL-1, respectively. The recoveries of the actual sample were 87.50%-99.99 %, 93.00%-98.50 % and 85.70%-98.42 %, respectively. Overall, the novel synchronous fluorescence spectrometry established in the experiment has the advantages of high sensitivity, good selectivity, fast detection speed and high accuracy. It has been successfully applied to the detection of residual amounts of ENO, OFL and TCH in wastewater with satisfactory results.

Synergistic integration of ZrO2-enriched reduced graphene oxide-based nanostructures for advanced photodegradation of tetracycline hydrochloride

The escalating demand for the antibiotic drug tetracycline hydrochloride (TCH) contributes to an increased release of its residues into land and water bodies, which poses risks to both aquatic life and human health. Therefore, it is precedence to effectively degrade TCH residues to protect environment from their long-term impacts. In this aspect, the present study entails the synthesis of zirconia (ZrO2) nanostructures and focuses on the enhancement in the catalytic performance of ZrO2 nanostructures by employing reduced graphene oxide (RGO) as a solid support to synthesize ZrO2-enriched RGO-based photocatalysts (ZrO2-RGO) for the degradation of TCH. The study delves into comprehensive spectroscopic and microscopic investigations and their photodegradation assessments. Powder XRD and HR-TEM studies depicted the phase crystallinity and also displayed uniform distribution of ZrO2 nanostructures with spherical morphology within ZrO2-RGO. This corresponds to high surface-to-volume ratios, providing a substantial number of active sites for light absorption and generation of e--h+ pairs. Moreover, the heterojunctions created between RGO and ZrO2 nanostructures promoted the interspecies electron transfer which prolonged the recombination time of e- and h+ than pure ZrO2 nanostructures, accounted for enhanced degradation of TCH using ZrO2-RGO. The photocatalytic activity of as-synthesized materials were examined under visible and UV light irradiation. The degradation efficiency of ~ 73.82% was achieved using ZrO2-RGO-based photocatalyst with rate constant k = 0.007023 min-1 under visible-light illumination. Moreover, under UV-light, the degradation rate was explicated to be k = 0.01017 min-1 with ~ 85.56% degradation of TCH antibiotics within 180 mins. Hence, the synthesized ZrO2-enriched RGO-based photocatalysts represents a promising potential for the effective degradation of pharmaceutical compounds, particularly TCH under visible and UV-light irradiation.

Preparation of O-g-C3N4 nanowires/Bi2O2CO3 porous plate composite photocatalysts for the efficient degradation of tetracycline hydrochloride in wastewater

Both g-C3N4 and Bi2O2CO3 are good photocatalysts for the removal of antibiotic pollutants, but their morphological modulation and catalytic performance need to be further improved. In this study, the calcination-hydrothermal method is used to prepare a O-g-C3N4@Bi2O2CO3 (CN@BCO) composite photocatalyst from dicyandiamide and bismuth nitrate. The prepared catalyst is characterized through various methods, including X-ray diffraction (XRD) and transmission electron microscopy (TEM). Further, the effects of different parameters, such as catalyst concentration and initial pH of the reaction solution, on its photocatalytic activity are investigated. The results show that the CN@BCO sample achieves an optimal degradation rate of 98.1% for tetracycline hydrochloride (TCH) with a concentration of 20 mg/L and a removal rate of 69.4% for total organic carbon (TOC) at 40 min. The quenching experiments show that ·O2-, h+, and ·OH participate in the photocatalytic process, with ·O2- being the most dominant active species. The toxicity of the predicted TCH degradation intermediates is analyzed using Toxicity Estimation Software Tool (TEST). Overall, the CN@BCO composite exhibits excellent photocatalytic performance, making it a promising candidate for environmental purification and wastewater treatment.

Underwater bubbling plasma assisted with persulfate activation for the synergistic degradation of tetracycline hydrochloride

The performance and mechanism of persulfate consisting of peroxymonosulfate (PMS) and peroxydisulfate (PDS) activation by underwater bubbling plasma (UBP) for the synergistic removal of tetracycline hydrochloride (TCH) were comparatively investigated. Both PMS and PDS addition significantly promoted the removal of TCH in UBP system, indicating persulfate exhibited highly synergistic effect with UBP. Furthermore, enhancing the persulfate dosage, peak voltage and pulse frequency, as well as reducing initial TCH concentration were favorable for the elimination of TCH. Compared with neutral condition, acidic and alkaline condition were advantageous to TCH removal. The presence of coexisting substances including Cl-, SO42- and humic acid (HA) had an adverse effect on TCH degradation, while Fe2+ could improve the removal of TCH. The degradation of ciprofloxacin and metronidazole proved the applicability for other antibiotics degradation of the reaction system. SO4-·, ·OH, ·O2-, hydrated electrons, O3 and H2O2 were the active substances responsible for TCH removal. The reduction of aqueous O3 concentration and enhancement of H2O2 concentration were observed after persulfate addition. UV-vis spectra and TOC analysis illustrated the addition of PMS or PDS facilitated the degradation and mineralization of TCH. 3D-EEMF spectra visually displayed the degradation process of TCH. Plausible degradation routes were deduced based on LC-MS and the toxicities of TCH and its intermediates were evaluated by Toxicity Estimation Software Tool.

Electrochemically deposited bimetallic SERS substrate for trace sensing of antibiotics

Electrochemically deposited bimetallic copper-gold nanoparticles on indium tin oxide (Cu-AuNPs on ITO) glass are demonstrated to be a sensitive and reproducible surface-enhanced Raman scattering (SERS) platform. An optimal signal enhancement with reasonably good degree of homogeneity was obtained by tuning the deposition parameters of the electrochemical setup. For Raman active analytes such as malachite green (MG) and rhodamine 6G (R6G), the developed SERS platform yields a limit of detection (LOD) of 0.75 nM. The usability of the proposed SERS platform has been realized through detection of two important antibiotics namely sulfamethoxazole (SFZ) and tetracycline hydrochloride (TCH) commonly used in egg farms. Furthermore, a machine learning (ML)-based model coupled with a dimensionality reduction technique-principal component analysis (PCA)-has been implemented to classify the targeted analytes in egg samples.

Activation of peroxymonosulfate by biochar-supported Fe3O4 derived from oily sludge to enhance the oxidative degradation of tetracycline hydrochloride

Carbon materials used for catalysis in advanced oxidation processes tend to be obtained from cheap and readily available raw materials. We constructed a carbon material, OSC@Fe3O4, by loading Fe3O4 onto the pyrolyzed hazardous waste oily sludge. OSC@Fe3O4 was then used to activate peroxymonosulfate (PMS) for the removal of tetracycline hydrochloride (TTCH) from water. At 298 K, 0.2 g⋅L-1 of catalyst and 0.3 g⋅L-1 of PMS, the reaction rate constant of the OSC@I-2/PMS system reached 0.079 min-1, with a TTCH removal efficiency of 92.6%. The degradation efficiency of TTCH remained at 81% after five cycles. The specific surface area and pore volume of OSC@I-2 were 263.9 m2⋅g-1 and 0.42 cm3⋅g-1, respectively, which improved the porous structure of the carbon material and provided more active points, thus improving the catalytic performance. N and S were doped into the oily sludge carbon due to the presence of N- and S-containing compounds in the raw oily sludge. N and S doping led to more electron-rich sites with higher negative charges in OSC@I-2 and gave the oily sludge carbon a higher affinity to PMS, thereby promoting its ability to activate PMS. Sulfate radicals (SO4•‾) played a dominant role in the degradation of TTCH, with demethylation and the breaking of double bonds being a possible degradation pathway. A biotoxicity test showed that the microbial toxicity of the degradation intermediates was significantly reduced. This work provides a strategy for the application of PMS-based catalysts derived from waste carbon resources.

Water flow promoted charge separation in piezoelectric Bi4Ti3O12 for the enhanced photocatalytic degradation of antibiotic

Addressing the issue of antibiotic residues in the environment is key to improving the quality of aquatic environments and reducing human health risks. In this study, piezoelectric bismuth titanate (Bi4Ti3O12) nanosheets are synthesized and employed to conduct antibiotic degradation. The piezoelectric potential induced by the water flow shear force is utilized to facilitate charge separation and migration in the photocatalytic process and enhance the catalytic degradation of antibiotic wastewater. As a result, 85% of tetracycline hydrochloride (TC) is degraded within 90 min. The piezo-photocatalytic process exhibits a 2.4 times faster reaction rate and a 15% higher mineralization rate than photocatalysis. Different environmental factors are investigated for their effects on the catalytic activity in piezo-photocatalysis. In situ electrochemical measurement and photoluminescence (PL) spectroscopy under stress demonstrated that the piezoelectric potential shifted the energy band of Bi4Ti3O12 and promoted the charge migration and separation, which produce more active species that favor the efficient catalytic degradation. Finally, the intermediate products of the tetracycline hydrochloride degradation process are analyzed and possible degradation pathways are suggested. This study elucidates the degradation mechanism of Bi4Ti3O12 as a piezo-photocatalyst for antibiotic pollutants, and meticulously investigates the charge transfer mechanism of the catalyst material in response to micro-stress. Hence, it provides an efficient solution for organic wastewater treatment and can potentially provide theoretical support for the development and performance optimization of catalyst materials applied in natural environments.

Novel g-C3N4/PrFeO3 nanocomposites with Z-scheme structure and superior photocatalytic activity toward visible-light-driven removal of tetracycline antibiotics

In the presented work, heterostructured nanocomposites based on g-C3N4 and PrFeO3 with different mass content of PrFeO3 (0-10 wt%) were prepared by ultrasonic processing to study their photocatalytic activity in the process of antibiotic degradation under visible light. The study of phase composition, structural, morphological and textural characteristics carried out by powder X-ray diffraction, scanning electron microscopy and adsorption-structural analysis confirmed the presence of two phases - graphite-like C3N4 and orthorhombic PrFeO3 with average crystallite sizes of 5 and 21 nm and mesoporous structure with specific surface area of 57.2-68.6 m2/g and average pore size of 20 nm. The measured values of the forbidden bandwidth for the obtained nanocomposites were ∼3 eV, indicating potential activity under visible light irradiation. The efficiency of antibiotic removal under visible light was evaluated in the degradation of TCHCl. It was found that 5 % PrFeO3 content was optimal and increased the TOF by 5 times compared to pure g-C3N4. The results of photocatalytic test with absorbers showed that photocatalysis occurs by Z-scheme mechanism. The results obtained allow us to consider this nanocomposite as an effective and stable photocatalyst for pharmaceutical wastewater treatment.

Enhanced conversion of superoxide radical to singlet oxygen in peroxymonosulfate activation by metal-organic frameworks derived heteroatoms dual-doped porous carbon catalyst

The activation of persulfate technology using carbon-based materials doped with heteroatoms has been extensively researched for the elimination of refractory pollutants in wastewater. In this study, metal-organic frameworks were utilized as precursors to synthesize P, N dual-doped carbon material (PNC), which was employed to activate peroxymonosulfate (PMS) for the degradation of tetracycline hydrochloride (TCH). The results demonstrated a 90.2% removal efficiency of total organic carbon within 60 min. The significant increase of surface defects on the nitrogen self-doped porous carbon materials anchored with phosphorus promoted the conversion of superoxide radical to singlet oxygen during PMS activation, which was identified as the key active species of PNC/PMS system. Additionally, the enhanced direct electron transfer also facilitated the degradation of TCH. Consequently, TCH was successfully degraded into nontoxic and harmless inorganic small molecules. The findings of this research provide valuable insights into improving the performance of heteroatom-doped carbon materials for pollutant degradation by activating PMS and transforming the non-radical pathway. The results highlight the potential of metal-organic frameworks derived heteroatoms dual-doped porous carbon catalysts for the development of advanced treatment technologies in wastewater treatment.

Efficient visible light-induced photocatalytic degradation of tetracycline hydrochloride using CuFe2O4 and PANI/CuFe2O4 nanohybrids

Tetracycline hydrochloride (TC-HCl) is widely implemented as a wide-ranging antibacterial drug in medical care and animal husbandry, in spite of having negative effects on the environment and human health. Photocatalytic treatment is one of the popular techniques used to treat TC-HCl in wastewater. In this study, we have used CuFe2O4 and CuFe2O4/polyaniline (PANI) nanohybrids as photocatalysts for the degradation of TC-HCl. The metal ferrite and its nanohybrids were synthesized by co-precipitation method. FTIR, UV-Vis, XRD, and SEM-EDX were used to characterize the synthesized nanohybrids. The optical band gaps were estimated to be 2.74 eV for CuFe2O4, 1.72 eV for 1-PANI/CuFe2O4, 1.66 eV for 3-PANI/CuFe2O4, and 1.31 eV for 5-PANI/CuFe2O4. The photocatalytic performance of the nanohybrids appeared superior than pristine CuFe2O4, and maximum photocatalytic degradation was observed to be 86% within 120 min using 5-PANI/CuFe2O4 as the photocatalyst. The degraded fragments were analyzed by LCMS technique, and a tentative mechanism for the degradation of TC-HCl was proposed.

Ultrasound enhanced destruction of tetracycline hydrochloride with peroxydisulfate oxidation over FeS/NBC catalyst: Governing factors, strengthening mechanism and degradation pathway

In this study, FeS/N-doped biochar (NBC) derived from the co-pyrolysis of birch sawdust and Mohr's salt was applied to evaluate the efficiency of catalyzed peroxydisulfate (PDS) oxidation for tetracycline (TC) degradation. It is found that the combination of ultrasonic irradiation can distinctly enhance the removal of TC. This study investigated the effects of control factors such as PDS dose, solution pH, ultrasonic power, and frequency on TC degradation. Within the applied ultrasound intensity range, TC degradation increases with increasing frequency and power. However, excessive power can lead to a reduced efficiency. Under the optimized experimental conditions, the observed reaction kinetic constant of TC degradation increased from 0.0251 to 0.0474 min-1, with an increase of 89%. The removal ratio of TC also increased from ∼85% to ∼99% and the mineralization level from 45% to 64% within 90 min. Through the decomposition testing of PDS, reaction stoichiometric efficiency calculation, and electron paramagnetic resonance experiments, it is shown that the increase in TC degradation of the ultrasound-assisted FeS/NBC-PDS system was attributed to the increase in PDS decomposition and utilization, as well as the increase in SO4•- concentration. The radical quenching experiments showed that SO4•-, •OH, and O2•- radicals were the dominant active species in TC degradation. TC degradation pathways were speculated according to intermediates from HPLC-MS analysis. The test of simulated actual samples showed that dissolved organic matter, metal ions, and anions in waters can undercut the TC degradation in FeS/NBC-PDS system, but ultrasound can significantly reduce the negative impact of these factors.

Roles of CeO2 in preparing Ce-doped CdIn2S4 with boosted photocatalytic degradation performance for methyl orange and tetracycline hydrochloride

Element doping is considered as a feasible strategy to develop efficient photocatalysts. In this study, a Ce-doped CdIn2S4 photocatalyst was prepared through a modified coprecipitation method. During the synthesis of Ce-doped CdIn2S4, the CeO2 nanorods were gradually reduced by the decomposition products of thioacetamide (TAA), and mainly existed as Ce(III) in the supernatant. This resulted in a large increase in the specific surface area of the as-obtained products, providing more exposed active sites for the reactant. Additionally, a trace amount of Ce was doped into the lattice of the CdIn2S4, resulting in a significant effect on the band structure. By tracing the roles of CeO2 during the synthesis process, a possible reaction mechanism was proposed. Benefiting from the synergistic advantages of the structural and compositional features, the optimal sample showed enhanced photocatalytic activities for the degradation of methyl orange (94.6% within 25 min) and tetracycline hydrochloride (85.6% within 120 min). The degradation rates were 13.3 times and 2.7 times higher than that of pristine CdIn2S4. This work may provide a strategy for designing metal element doped photocatalysts with good activity for pollutant removal.

Regeneration and modification of cellulose acetate from cigarette waste: Biomedical potential by encapsulation of tetracycline hydrochloride

Cigarette waste are pervasive litter on Earth, posing a major threat to organisms and ecosystems. However, these waste contain cellulose acetate (CA) and can be recycled, transforming into raw materials for new products. Polymers like CA can be used in biomedical applications as drug carriers and scaffolds for drug release. In this study, cigarette filters waste was collected, recycled and used for fabricating the nanofibrous membrane of cellulose acetate nanofibers (CFCA) through electrospinning technique. Tetracycline hydrochloride (TC) was encapsulated in the nanofibers to prevent bacterial infections. Various analyses were conducted: Scanning Electron Microscope (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction Analysis (XRD) and Thermogravimetric analysis (TGA). CA and CFCA exhibited high water uptake properties and exhibited similar breaking stress and strain values. Both CA and CFCA effectively acted as stable drug carriers, with sustained in vitro drug release. Antibacterial activity was demonstrated by the drug-loaded CA and CFCA nanofibers against, Gram-positive bacteria Staphylococcus aureus and Gram-negative bacteria Escherichia coli. Based on their cytotoxicity evaluations on mouse fibroblast cells (L929), CA and CFCA fibrous mats demonstrated no cytotoxicity and similar cell viability results. Consequently, the TC-loaded nanofibers made from CA and CFCA exhibited suitable properties for wound healing applications.

Preparation of sludge-based biochar loaded with ferromanganese and its removal mechanism of tetracycline hydrochloride

To remove the serious contamination caused by tetracycline hydrochloride, this paper uses the method of impregnation followed by pyrolysis to prepare ferromanganese-loaded sludge-based biochar and investigate its effectiveness in removing tetracycline hydrochloride. The material was characterized by field emission SEM, FTIR, and X-ray diffraction analysis. The possible reaction mechanisms involved in the removal of tetracycline were deduced based on the determination of Mn2+ during the reaction process and XPS characterization of materials before and after the reaction, and analysis of degradation intermediates and reaction pathways during tetracycline hydrochloride degradation was discussed. The results showed that the highest removal rate of 90.71% was achieved at a Fe-to-Mn ratio of 2:1 for the Fe-to-Mn-loaded sludge-based biochar. XPS characterization before and after the reaction showed that the valence state of Fe did not change significantly and was stable, while Mn4+ partially changed to Mn2+ and a redox reaction occurred. The changes in Mn2+ concentration during the reaction showed that the degradation of tetracycline hydrochloride was mainly dominated by MnO2. The LC-MS analysis revealed eight intermediates in the degradation of tetracycline, and two possible reaction pathways existed.

Enhanced photocatalytic activity of S-doped graphitic carbon nitride hollow microspheres: Synergistic effect, high-concentration antibiotic elimination and antibacterial behavior

For the past few years, graphitic carbon nitride (g-C₃N₄) has been widely used to eliminate environmental pollutants, but limited active site on surface and low separation/migration ability suppress its practical uses. Herein, we adopted a supramolecular self-assembly route followed with S doping to synthesize S-doped g-C₃N₄ with a hollow microsphere composition (SCNHM), where the shell was demonstrated to compose of ultrathin nanosheets. The unique structural characteristics endow the SCNHM with high specific surface area (∼81 m² g^-1) to provide abundant reaction sites and enhanced light-harvesting due to the light-scattering effect of hollow structure. Moreover, the S dopant meliorated the electronic structure to narrow the bandgap and promoted the charge separation/transfer capability. With this synergistic effect, the SCNHM presented greatly improved photocatalytic activity for degrading tetracycline hydrochloride (TC) compared to the CN, SCN and CNHM samples. This photocatalyst could eliminate high-concentration TC (50 mg L^-1) in 18 min, and the 30 min removal efficiencies of 100 mg L^-1 and 200 mg L^-1 reached 92 % and 60 %, which is much better than the reported photocatalysts in literatures (usually ≤ 20 mg L^-1). Additionally, the good photocatalytic durability was confirmed and the degradation pathway of TC was proposed. Furthermore, the SCNHM was proved to meanwhile possess superior performance for inactivating the typical Gram-positive bacterium of Staphylococcus aureus (S. aureus) and the typical Gram-negative bacterium of Escherichia coli (E. coli). Finally, based on determination of band alignment and detection of active species, a plausible photocatalytic mechanism was proposed.

Activation of persulfate by heterogeneous nano zero-valent iron/halloysite nanotubes: reaction behavior, mechanism, and implication for tetracycline hydrochloride degradation

A novel composite (nZVI/HNTs) was prepared via incorporating nano zero-valent iron (nZVI) on halloysite nanotubes (HNTs) for degrading tetracycline hydrochloride (TCH) with existence of persulfate (PS). The adsorption process of nZVI/HNTs to TCH conformed to the Freundlich isotherm model and pseudo-second-order kinetic model, and its maximum adsorption capacity was 76.62 mg·g-1. Furthermore, the nZVI/HNTs + PS system exhibited satisfactory degradation efficiency (84.21%) for TCH, and stable nZVI/HNTs (Fe leaching < 0.001 mg·L-1) could be reused. When nZVI/HNTs dosage, PS dosage and temperature increased, TCH degradation could be enhanced. After four cycling, nZVI/HNTs + PS system had still 65.8% degradation for TCH. The quenching tests and EPR analysis evidenced that SO4•- was predominant instead of •OH in such system. Three possible pathways of TCH degradation were provided through the liquid chromatograph-mass spectrometer (LC-MS) determination. Meanwhile, the biological toxicity prediction analysis indicated that the nZVI/HNTs + PS system would be an environment friendly treatment method toward TCH pollution.

Perylene diimide/iron phthalocyanine Z-scheme heterojunction with strong interfacial charge transfer through π-π interaction: Efficient photocatalytic degradation of tetracycline hydrochloride

The development of an all-organic Z-scheme heterojunction photocatalyst with the matched band structure, efficient electron transfer and excellent photocatalytic performance is valuable for a sustainable future. A novel perylene diimide/phthalocyanine iron (PDI/FePc) heterojunctions with strong π-π interaction were synthesized by a self-assembled method, which exhibited strong visible-light-driven photocatalytic degradation activities of tetracycline hydrochloride (TC). The TC removal rate over PDI/FePc was achieved three times and 87.5 times higher than that of PDI and FePc. PDI/FePc (131.1 mv·dec^-1) presented a lower Taffel slope than that of PDI (228.6 mv·dec^-1) for the oxidation. This may be due to the strong π-π interactions between PDI and FePc, which can reduce the layer spacing of the supramolecular structure and facilitate the separation and transfer of photogenerated carriers in the built-in electric field. In addition, radical quenching tests revealed that superoxide radicals (•O₂^-) acted as a dominant role in photocatalytic oxidation. An increscent specific surface area of PDI decorated by FePc also gave the rapid pathway for charge transfer and enhanced the adsorption ability. This provides a new idea for the formation of heterojunction to improve the photocatalytic activity of organic supramolecular materials.

Visible-light-driven AgI/Bi4O5I2 S-scheme heterojunction for efficient tetracycline hydrochloride removal: Mechanism and degradation pathway

The existence of excessive tetracycline hydrochloride (TCH) in the ecological environment has seriously threatened human health, so there is an urgent need to develop a high-performance photocatalyst that can efficiently and greenly remove TCH. Currently, most photocatalysts have the problems of fast recombination of photogenerated charge carriers and low degradation efficiency. Herein, S-scheme AgI/Bi₄O₅I₂ (AB) heterojunctions was constructed for TCH removal. Compared with the single component, the apparent kinetic constant of the 0.7AB is 5.6 and 10.2 time as high as the AgI and Bi₄O₅I₂, and the photocatalytic activity only decreases by 3.0% after four recycle runs. In addition, to verify the potential practical application of the fabricated AgI/Bi₄O₅I₂ nanocomposite, the photocatalytic degradation of TCH was performed under different conditions by regulating the dosage of photocatalyst, the TCH concentration, pH, and the existence of various anions. Systematical characterizations are conducted to investigate the intrinsic physical and chemical properties of the constructed AgI/Bi₄O₅I₂ composites. Based on the synergetic characterizations by in situ X-ray photoelectron spectroscopy, band edge measurements, as well as reactive oxygen species (ROS) detections, the S-scheme photocatalytic mechanism is proved. This work provides a valuable reference for developing efficient and stable S-scheme AgI/Bi₄O₅I₂ photocatalyst for TCH removal.

Mitigating mechanism of nZVI-C on the inhibition of anammox consortia under long-term tetracycline hydrochloride stress: Extracellular polymeric substance properties and microbial community evolution

In this study, activated carbon-loaded nano-zero-valent iron (nZVI-C) composites were added to anaerobic ammonium oxidation bacteria (AnAOB) to overcome the inhibition of tetracycline hydrochloride (TCH). Results showed that 500 mg L^-1 nZVI-C effectively mitigated the long-term inhibition of 1.5 mg L^-1 TCH on AnAOB and significantly improved the total nitrogen removal efficiency (TNRE) (from 65.27% to 86.99%). Spectroscopic analysis revealed that nZVI-C increased the content of N-H and CO groups in EPS, which contributed to the adsorption of TCH. The accumulation of humic acid-like substances in EPS was also conducive to strengthening the extracellular defense level. In addition, TCH-degrading bacteria (Clostridium and Mycobacterium) were enriched in situ, and the abundance of Ca. Brocadia was significantly increased (from 10.69% to 18.59%). Furthermore, nZVI-C increased the abundance of genes encoding tetracycline inactivation (tetX), promoted mineralization of TCH by 90%, weakening the inhibition of TCH on microbial nitrogen metabolism. nZVI-C accelerated the electron consumption of anammox bacteria by upregulating the abundance of electron generation genes (nxrA, hdh) and providing electrons directly.

Peroxymonosulfate and peroxydisulfate activation by fish scales biochar for antibiotics removal: Synergism of N, P-codoped biochar

Social development is accompanied by technological progress, which commonly leads to the expansion of pollution As an essential resource of modern medical treatment, antibiotics have become a hot topic in the aspect of environmental pollution. In this study, we first used fish scales to synthesize N, P-codoped biochar catalyst (FS-BC) as peroxymonosulfate (PMS) and peroxydisulfate (PDS) activator to degrade tetracycline hydrochloride (TC). At the same time, peanut shell biochar (PS-BC) and coffee ground biochar (CG-BC) were prepared as reference materials. Among them, FS-BC exhibited the best catalytic performance due to the excellent defect structure (I_D/I_G = 1.225) and the synergism of N, P heteroatoms. PS-BC, FS-BC and CG-BC achieved degradation efficiencies of 86.26%, 99.71% and 84.41% for TC during PMS activation and 56.79%, 93.99% and 49.12% during PDS, respectively. In both FS-BC/PMS and FS-BC/PDS systems, non-free radical pathways involved singlet oxygen (¹O₂), surface-bound radicals mechanism and direct electron transfer mechanism. Structural defects, graphitic N and pyridinic N, P-C groups and positively charged sp² hybridized C adjacent to graphitic N were all critical active sites. FS-BC has the potential for practical applications and development because of its robust adaptation to pH and anions and stable re-usability. This study not only provides a reference for biochar selection, but also suggests a superior strategy for TC degradation in the environment.

Removal of low-concentration tetracycline from water by a two-step process of adsorption enrichment and photocatalytic regeneration

Developing a high-performance method that can effectively control pollution caused by low concentrations of antibiotics is urgently needed. Herein, a novel three-dimensional PPy/Zn₃In₂S₆ nanoflower composites were prepared for the comprehensive treatment of low-concentration tetracycline (Tc) hydrochloride in wastewater based on the adsorption/photocatalysis of Zn₃In₂S₆ and the conductivity of PPy. In this preparation method, adsorption enrichment and photocatalytic regeneration were conducted in two steps, eliminating the dilution and dispersion effects of aqueous solvents on photocatalytic species and antibiotics. Results showed that Zn₃In₂S₆ could effectively adsorb 87.85% of Tc at pH of 4.5 and photocatalytically degrade Tc at pH of 10.5. Although the adsorption capacity of Zn₃In₂S₆ was slightly reduced after being combined with PPy, its photocatalytic efficiency was substantially enhanced. Specifically, 0.5%PPy/Zn₃In₂S₆ could degrade 99.92% of the surface-enriched Tc in 1 h and induce the regeneration of the adsorption sites. Furthermore, the adsorption capacity remained above 85% even after recycling PPy/Zn₃In₂S₆ ten times. The photocatalytic degradation mechanism analysis revealed that the enrichment of Tc on 0.5%PPy/Zn₃In₂S₆ negatively impacts the photocatalytic efficiency, while •O₂^- and •OH radicals were the main oxidative species that played an important role in the photoregeneration process.

Efficient visible-light-driven S-scheme AgVO3/Ag2S heterojunction photocatalyst for boosting degradation of organic pollutants

The traditional semiconductor photocatalysts for solving the related environmental aggravation are often challenged by the recombination of photogenerated carriers. Designing an S-scheme heterojunction photocatalyst is one of the keys to tackling its practical application problems. This paper reports an S-scheme AgVO₃/Ag₂S heterojunction photocatalyst constructed via a straightforward hydrothermal approach that exhibits outstanding photocatalytic degradation performances to the organic dye Rhodamine B (RhB) and antibiotic Tetracycline hydrochloride (TC-HCl) driven by visible light. The results show that AgVO₃/Ag₂S heterojunction with a molar ratio of 6:1 (V6S) possesses the highest photocatalytic performances, 99% of RhB can be almost degraded by 0.1 g/L V6S within 25 min light illumination, and about 72% of TC-HCl can be photodegraded with the act of 0.3 g/L V6S under 120 min light irradiation. Meanwhile, the AgVO₃/Ag₂S system exhibits superior stability and maintains high photocatalytic activity after 5 repeated tests. Moreover, the EPR measurement and radical capture test identify that superoxide radicals and hydroxyl radicals mainly contribute to the photodegradation process. The present work demonstrates that constructing an S-scheme heterojunction can effectively inhibit the recombination of carriers, providing insights into the fabrication of applied photocatalysts for practical wastewater purification treatment.

Tetracycline hydrochloride degradation by activation of peroxymonosulfate with lanthanum copper Ruddlesden-Popper perovskite oxide: Performance and mechanism

ABO₃-type perovskite oxides have been regarded as a kind of potential catalyst for peroxymonosulfate (PMS) activation. But some limitations such as specific pH conditions and coexisting ion interference restrict its practical application. Herein, a lanthanum copper Ruddlesden-Popper perovskite oxide (La₂CuO₄) was successfully synthesized through the sol-gel process and applied in the activation of PMS. And for the first time the La₂CuO₄/PMS system was used for tetracycline hydrochloride (TC-HCl) degradation. Results showed that La₂CuO₄ was a potential PMS activation catalyst in the removal of antibiotics. At optimized condition (0.2 g/L catalysts, 1 mM PMS, pH₀ 6.9), 96.05% of TC-HCl was removed in 30 min. In experiments of debugging control conditions, over a wide pH range of 3-11, more than 90% of TC-HCl can be removed. In the natural water treatment process, TC-HCl removal rates of about 84.2% and 70.3% were obtained in tap water and River water, respectively. According to the reusability and stability tests and the results of FTIR and XPS analysis, La₂CuO₄ had high structural and chemical stability. Electron paramagnetic resonance (EPR) suggested that the active species including ·OH, SO₄^-· and ¹O₂ were detected in degradation reaction. Finally, reasonable reaction mechanisms and possible degradation pathways of TC-HCl were proposed. These results indicate that La₂CuO₄ can act as a potential catalyst for PMS activation to degrade TC-HCl in water.

A novel MIL-125(Ti)-based nanocomposite for enhanced adsorption and catalytic degradation of tetracycline hydrochloride: Synergetic mechanism of calcination and the nitrogen-containing reticulated surface layer

A multi-nitrogen conjugated organic molecule (TPE-2Py) was selected to surface modify the calcined MIL-125(Ti) to prepare a nanocomposite (TPE-2Py@DSMIL-125(Ti)) for adsorption and photodegradation of organic pollutant (tetracycline hydrochloride) under visible light. A novel reticulated surface layer was formed on the nanocomposite, and the adsorption capacity of TPE-2Py@DSMIL-125(Ti) for tetracycline hydrochloride can reach 157.7 mg/g under neutral conditions, which is higher than that of most other reported materials. Kinetic and thermodynamic studies show that the adsorption is a spontaneous heat absorption process, dominated by chemisorption, in which electrostatic interaction, π-π conjugation and Ti-N covalent bonds played dominant roles. The photocatalytic study shows that the visible photo-degradation efficiency of TPE-2Py@DSMIL-125(Ti) for tetracycline hydrochloride can further reach 89.1% after adsorption. Mechanism studies reveal that •O₂^- and h⁺ play a major role in the degradation process, and the separation and transfer rate of photo-generated carriers increase, improving its visible photocatalytic performance. This study revealed the relationship between the adsorption/photocatalytic properties of the nanocomposite and the structure of the molecular as well as the calcination, providing a convenient strategy to regulate the removal efficiency of MOFs materials towards organic pollutants. Furthermore, TPE-2Py@DSMIL-125(Ti) exhibits good reusability and even better removal efficiency for tetracycline hydrochloride in real water samples, indicating its sustainable treatment of pollutants in contaminated water.

The Ovs surface defecting of an S-scheme g-C3N4/H2Ti3O7 nanoheterostructures with accelerated spatial charge transfer

Semiconductor photocatalysis was a rising star in the sustainable transformation of solar energy for environmental problems governance. Herein, an S-scheme g-C₃N₄/H₂Ti₃O₇ heterostructure was constructed and applied to tetracycline hydrochloride (TCH) destruction. The g-C₃N₄/H₂Ti₃O₇ composite has a superior photocatalytic property to degrade TCH in contrast with bare g-C₃N₄ and H₂Ti₃O₇. The 20% g-C₃N₄/H₂Ti₃O₇ (CNHTO20) composite exhibited the optimum photocatalytic performance, and the degradation efficiency of 20 mg/L TCH reached 87.37% within 3 h (K = 0.572 min^-1). The affluent active sites of the g-C₃N₄ nanosheet and effective interfacial charge separation of the S-scheme pathway facilitated the excellent performance. Moreover, the ample oxygen vacancies (Ovs) act as the electron mediator, not only reducing the band gap energy by producing the formation of defect levels, but also broadening the photo response range and promoting the interfacial charge transfer. The coordination complexes formed between TCH molecules and Ti (IV) ions in CNHTO20 composites induce strong visible light absorption through ligand-metal charge transfer (LMCT). The Ti⁴⁺/Ti³⁺ metal cycle in CNHTO20 was conducive to the separation of the photogenerated electron-hole pairs on the heterojunction interface as well. The ESR characterization and trapping experiments certified that the dominant substances were OH, O₂^- and h⁺. The AQY calculated by the COD removal rate was 0.16%. Conclusively, the S-scheme heterojunction between H₂Ti₃O₇ and g-C₃N₄ enabled the CNHTO photocatalyst with high redox ability and boosted photocatalytic performance accordingly. This study may shed some enlightenment on the construction of heterojunctions and the realistic treatment of wastewater.

Effect and mechanism of simultaneous cadmium-tetracycline removal by a self-assembled microbial-photocatalytic coupling system

Electrochemical bacteria Shewanella oneidensis MR-4 (MR-4) was used to biologically generate cadmium sulfide (bio-CdS) nanocrystals and construct a self-assembled intimately coupled photocatalysis-biodegradation system (SA-ICPB) to remove cadmium (Cd) and tetracycline hydrochloride (TCH) from wastewater. The characterization using EDS, TEM, XRD, XPS, and UV-vis confirmed the successful CdS bio-synthesis and its visible-light response capacity (520 nm). 98.4% of Cd²⁺ (2 mM) was removed during bio-CdS generation within 30 min. The electrochemical analysis confirmed the photoelectric response capability of the bio-CdS as well as its photocatalytic efficiency. Under visible light, SA-ICPB entirely eliminated TCH (30 mg/L). In 2 h, 87.2% and 43.0% of TCH were removed separately with and without oxygen. 55.7% more chemical oxygen demand (COD) was removed with oxygen participation, indicating the degradation intermediates elimination by SA-ICPB required oxygen participation. Biodegradation dominated the process under aerobic circumstances. Electron paramagnetic resonance analysis indicated that h⁺ and ·O₂^- played a decisive role in photocatalytic degradation. Mass spectrometry analysis proved that TCH was dehydrated, dealkylated, and ring-opened before mineralizing. In conclusion, MR-4 can spontaneously generate SA-ICPB and rapidly-deeply eliminate antibiotics by coupling photocatalytic and microbial degradation. Such an approach was efficient for the deep degradation of persistent organic pollutants with antimicrobial properties.

Architecture and active motif engineering of N-CoS2@C yolk-shell nanoreactor for boosted tetracycline removal via peroxymonosulfate activation: Performance, mechanism and destruction pathways

Rational construction of yolk-shell architecture with regulated binding configuration is crucially important but challengeable for antibiotic degradation via peroxymonosulfate (PMS) activation. In this study, we report the utilization of yolk-shell hollow architecture consisted of nitrogen-doped cobalt pyrite integrated carbon spheres (N-CoS₂@C) as PMS activator to boost tetracycline hydrochloride (TCH) degradation. The creation of yolk-shell hollow structure and nitrogen-regulated active site engineering of CoS₂ endow the resulted N-CoS₂@C nanoreactor with high activity for PMS activating toward TCH degradation. Intriguingly, the N-CoS₂@C nanoreactor exhibits an optimal degradation performance with a rate constant of 0.194 min^-1 toward TCH via PMS activation. The ¹O₂ and SO₄^•- species are demonstrated as the dominant active substances for TCH degradation through quenching experiments and electron spin resonance characterization. The possible degradation mechanism, intermediates and degradation pathways for TCH removal over the N-CoS₂@C/PMS nanoreactor are unveiled. Graphitic N, sp²-hybrid carbon, oxygenated group (C-OH) and Co species are verified as the possible catalytic sites of N-CoS₂@C for PMS activation toward TCH removal. This study offers a unique strategy to engineer sulfides as highly efficient and promising PMS activators for antibiotic degradation.

In-situ preparation of yeast-supported Fe0@Fe2O3 as peroxymonosulfate activator for enhanced degradation of tetracycline hydrochloride

Nano zero-valent iron (nZVI) is extensively used as a peroxymonosulfate (PMS) activator but suffers from the ease of oxidation and agglomeration due to its high surface energy and inherent magnetism. Here, green and sustainable yeast was selected as a support material to firstly in-situ prepare yeast-supported Fe⁰@Fe₂O₃ and used for activating PMS to degrade tetracycline hydrochloride (TCH), one of the common antibiotics. Due to the anti-oxidation ability of the Fe₂O₃ shell and the support effect of yeast, the prepared Fe⁰@Fe₂O₃/YC exhibited a superior catalytic activity for the removal of TCH as well as some other typical refractory contaminants. The chemical quenching experiments and EPR results demonstrated SO₄^•- was the main reactive oxygen species while O₂^•-, ¹O₂ and ^•OH played a minor role. Importantly, the crucial role of the Fe²⁺/Fe³⁺ cycle promoted by the Fe⁰ core and surface iron hydroxyl species in PMS activation was elucidated in detail. The TCH degradation pathways were proposed by LC-MS and density functional theory (DFT) calculation. In addition, the outstanding magnetic separation property, anti-oxidation ability, and high environmental resistance of the catalyst were demonstrated. Our work may inspire the development of green, efficient, and robust nZVI-based materials for wastewater treatment.

Zeolitic imidazolate framework-L loaded on melamine foam for removal tetracycline hydrochloride from water

Zeolitic imidazolate framework-L/melamine foam (ZIF-L/MF) is fabricated by an in situ growth method to treat the tetracycline hydrochloride in wastewater. The results show that a large amount of leaf-like ZIF-L is vertically grown on the MF surface. ZIF-L/MF exhibits well adsorption performance with a maximum adsorption ability of 1346 mg/g. The pseudo-second-order kinetic model and the Langmuir isotherm model are used to describe the adsorption process well. In addition, the influences of pH and coexisting ions are studied. According to the experimental data and analysis, the adsorption mechanisms may involve H-bonding, π-π interaction, and weak electrostatic interaction. A dynamic adsorption experiment is also performed, and the results show that the time required to achieve the same removal efficiency as static adsorption is reduced by half. This work shows that the obtained ZIF-L/MF has practical applications in antibiotic adsorption.

Preparation of sludge-based micro-electrolysis filler and its application in pharmaceutical wastewater treatment by an up-flow aerated filter

Sewage sludge (SS) and raw pharmaceutical wastewater (RPW) are both toxic and harmful wastes, which are a menace to human and animal health and the ecosystem. A sludge-base micro-electrolysis filler (SMEF) was gained by SS and Fe powder as the primary raw materials. The preparation process of the SMEF was achieved based on the tetracycline hydrochloride (TCH) removal efficiency. The physicochemical characteristics (e.g., surface area, morphology features, function groups, and valence state of Fe) of the obtained SMEF were decided. With an Fe/SS ratio of 1/2, a sintering temperature of 1050 °C, a sintering time of 30 min, an initial pH of 3, and a filler dosage of 100 g/L, the SMEF demonstrated a high degradation ability for TCH with a removal rate reached 95.62% in 24 h. Kinetic analysis showed that the adsorption process of TCH was consistent with the pseudo-first-order Lagergren kinetic model. Moreover, degradation mechanism analysis showed that TCH was gradually degraded through dehydroxylation, demethylation, ring opening, oxidation, and reduction in solution. The SMEF had a good continuous removal performance for contaminants in RPW in an up-flow aerated filter. The removal efficiency of TOC and TN reached 46.60 and 42.27% within 24 h, respectively. The treated pharmaceutical wastewater was considered non-biotoxic after 24-h treatment with the SMEF. This study presents a innovative Fe-C micro-electrolysis filler based on SS and is important to the environmental-friendly recycling of SS and sustainable treatment of RPW, achieving the purpose of waste disposal.

Ultrafast short-range catalytic pathway modified peroxymonosulfate activation over CuO with surface oxygen defects for tetracycline hydrochloride degradation

The presence of antibiotics in water bodies seriously threatens the ecosystem and human health. Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS), an effective method to remove antibiotics, have a bottleneck problem that the low oxidant utilization is attributed to the hindered electron transfer between metal oxides and peroxides. Here, CuO with rich oxygen vacancies (OVs), MSCuO-300, was synthesized to efficiently degrade tetracycline hydrochloride (TTCH) (k = 0.095 min^-1). The dominant role of direct adsorption and activation of OVs and its regulated Cu-O, rather than surface hydroxyl adsorption, mediated a short-range catalytic pathway. The shortened catalytic pathway between active sites and PMS accelerated the charge transfer at the interface, which promoted PMS activation. Compared with Cu_xO-500 and Commercial CuO, the activation rate of PMS was increased by 11.97, and 12.64 times, respectively. OVs contributed to the production of ¹O₂ and O₂^•-, the main active species. In addition, MSCuO-300/PMS showed excellent adaptability to real water parameters, such as pH (3-11), anions, and continuous reactor maintained for 168 h. This study provides a successful case for the purification of antibiotic-containing wastewater in the design of efficient catalysts by oxygen defect strategies.

Activity and mechanism of vanadium sulfide for organic contaminants oxidation with peroxymonosulfate

Transition metal sulfides have been demonstrated to be effective for peroxymonosulfate (PMS) activation towards wastewater treatment. However, the activity of vanadium sulfide (VS₄) and the role of the chemical state of V have not been revealed. Here, three types of VS₄ with various morphologies and chemical states of V were synthesized by using methanol (M-VS₄, nanosphere composed of nanosheets), ethanol (E-VS₄, sea urchin like nanosphere) and ultrapure water (U-VS₄, compact nanosphere) as hydrothermal solvent, respectively, and used as heterogeneous catalysts to activate PMS for the degradation of refractory organic pollutants. The effects of PMS concentration, temperature, pH, inorganic ions, and humic acid (HA) on the degradation efficiency of VS₄/PMS system were investigated systematically. The results indicated that the highest specific surface area and lowest ratio of V⁵⁺ enable E-VS₄/PMS system possessed the highest performance in degrading tetracycline hydrochloride (TCH), in which 100% TCH was removed after operating 10 min (0.805 min^-1) under a relatively low concentration of PMS (1 mM) and catalyst (100 mg/L). It also revealed that the system exhibited a typical radical process in TCH degradation, which could be attributed to the redox cycles between V⁵⁺, V⁴⁺ and V³⁺ in the presence of PMS to generate various radicals. This radical process enabled the E-VS₄/PMS system with a high activity in wide reaction conditions and high mineralization ratios in degrading various refractory organic pollutants within 10 min. In addition, the E-VS₄/PMS system exhibited favorable reusability and stability with very less V and S ions leaching, and showed excellent performance in real water purification.

In situ synthesis of g-C3N4/TiO2 heterojunction by a concentrated absorption process for efficient photocatalytic degradation of tetracycline hydrochloride

The construction of heterojunctions between semiconductors is a preferred route to improve overall photocatalytic activity. In this work, a facile and feasible method was innovatively developed to one-step prepare g-C3N4/TiO2 heterojunctions via an absorption-calcination process using nitrogen and titanium precursors directly. This method can effectively avoid interfacial defects and establish a tight interfacial connection between g-C3N4 and TiO2. The resultant g-C3N4/TiO2 composites exhibited prominent photodegradation efficiency for tetracycline hydrochloride (TC-HCl) under visible light and simulated-sunlight irradiation. The optimal g-C3N4/TiO2 composite (urea content of 4 g) showed the highest photocatalytic efficiency, which can degrade 90.1% TC-HCl under simulated-sunlight irradiation within 30 min, achieving 3.9 and 2 times increases compared to pure g-C3N4 and TiO2, respectively. Besides, photodegradation pathways based on the role of active species ·O2- and ·OH were identified, indicating that a direct Z-scheme heterojunction was formed over the g-C3N4/TiO2 photocatalyst. The enhanced photocatalytic performance can be attributed to the close-knit interface contact and the formation of Z-scheme heterojunction between g-C3N4 and TiO2, which can accelerate the photo-induced charge carrier separation, broaden the spectra absorption range, and retain a higher redox potential. This one-step synthesis method may provide a new strategy for the construction of Z-scheme heterojunction photocatalysts consisting of g-C3N4 and TiO2 for environmental remediation and solar energy utilization.

Hydrogel-forming microarray patch mediated transdermal delivery of tetracycline hydrochloride

Antibiotic resistance is one of the most serious health problems today and is expected to worsen in the coming decades. It has been suggested that antibiotic administration routes that bypass the human gut could potentially tackle this problem. In this work, an antibiotic hydrogel-forming microarray patch (HF-MAP) system, which can be used as an alternative antibiotic delivery technology, has been fabricated. Specifically, poly(vinyl alcohol)/poly(vinylpyrrolidone) (PVA/PVP) microarray showed excellent swelling properties with >600% swelling in PBS over 24 h. The tips on the HF-MAP were proven to be able to penetrate a skin model which is thicker than stratum corneum. The antibiotic (tetracycline hydrochloride) drug reservoir was mechanically robust and dissolved completely in an aqueous medium within a few minutes. In vivo animal studies using a Sprague Dawley rat model showed antibiotic administration using HF-MAP achieved a sustained release profile, in comparison with animals receiving oral gavage and intravenous (IV) injection, with a transdermal bioavailability of 19.1% and an oral bioavailability of 33.5%. The maximum drug plasma concentration for HF-MAP group reached 7.40 ± 4.74 μg/mL at 24 h, whereas the drug plasma concentration for both oral (5.86 ± 1.48 μg/mL) and IV (8.86 ± 4.19 μg/mL) groups peaked soon after drug administration and had decreased to below the limit of detection at 24 h. The results demonstrated that antibiotics can be delivered by HF-MAP in a sustained manner.

A novel BC/g-C3N4 porous hydrogel carrier used in intimately coupled photocatalysis and biodegradation system for efficient removal of tetracycline hydrochloride in water

Intimately coupled photocatalysis and biodegradation (ICPB) is a promising technology to remove refractory contaminants from water. The key to successful ICPB is a carrier capable of accumulating biofilm and adhering photocatalyst firmly. Herein, BC/g-C₃N₄ was prepared into a three dimensional porous hydrogel and used as a carrier in ICPB system for the first time. Degradation experiments revealed that the removal rate of tetracycline hydrochloride (TCH) in water by the ICPB system was 96.0% after 10 h, which was significantly higher than that by the photocatalysis (PC, 76.3%), biodegradation (B, 32.5%), adsorption (AD, 17.2%), and photolysis (P, 5.0%) systems. Photo-electrochemical tests confirmed that ICPB system had superior electron transfer ability between photocatalysts and microorganisms. The removal efficiency of COD proved that microorganisms played an important role in the mineralization process of TCH by the ICPB system. After the ICPB degradation experiment, microorganisms maintained high activity and Pseudomonas, Burkholderiaceae and Flavobacterium which had TCH degradation or electron transport ability, were enriched. In conclusion, the novel ICPB carrier overcame shortcomings of the traditional ICPB carrier and the novel ICPB system had superior degradation performance for TCH. This study provided a possible method to promote the practical application of ICPB technology.

Determination of the key role to affect the piezocatalytic activity of graphitic carbon nitride for tetracycline hydrochloride degradation in water

Graphitic carbon nitride (g-C₃N₄) has been proved to possess intrinsic piezoelectricity and its two-dimensional (2D) nanosheets present piezocatalytic activity to produce hydrogen from water splitting and eliminate organic pollutants in wastewater. Specific surface area and piezoelectric polarization are of great significance to achieve high piezocatalytic activity, but it is difficult to simultaneously improve both of them. Herein, to reveal the dominant role in the piezocatalysis of g-C₃N₄, we investigated the effect of exfoliation level on the piezocatalytic activity for degrading tetracycline hydrochloride (TC). Characterization results indicated that the specific surface area of the bulk g-C₃N₄ was much lower than those of exfoliated g-C₃N₄ samples due to the decrease of size and thickness. However, piezoresponse force microscopy (PFM) and kelvin probe force microscopy (KPFM) examinations suggested the bulk g-C₃N₄ possessed the biggest piezoelectric polarization that gradually declined as increasing the exfoliation temperature. Through testing the piezocatalytic abatement of TC, the activity decline following the order of decrease in polarization was confirmed, which demonstrated the piezoelectric polarization was the dominant factor in the piezocatalysis of g-C₃N₄. This conclusion was also verified by the step-by-step performance decrease of the bulk g-C₃N₄ during the successive four piezocatalytic runs, where the ultrasound treatment promoted the delamination of g-C₃N₄. In addition, superoxide (·O₂^-) radical, hydroxyl (·OH) radical and polarized positive charge were determined to be main active species, and accordingly the bulk g-C₃N₄ had the highest ·OH and ·O₂^- concentrations, as well as the highest piezocurrent response. This work reveals the main role to affect the piezocatalytic performance of g-C₃N₄, and also provides a possible strategy to design piezocatalysts with optimized piezocatalytic activity.

Mitigating phytotoxicity of tetracycline by metal-free 8-hydroxyquinoline functionalized carbon nitride photocatalyst

Photooxidative removal of pharmaceuticals and organic dyes is an effective way to eliminate growing micropollutants. However, photooxidation often results in byproducts as secondary hazardous substances such as phytotoxins. Herein, we found that photooxidation of common antibiotic tetracycline hydrochloride (TCH) over a metal-free 8-hydroxyquinoline (8-HQ) functionalized carbon nitride (CN) photocatalyst significantly reduces the TCH phytotoxic effect. The phytotoxicity test of photocatalytic treated TCH-solution evaluated towards seed growth of Cicer arietinum plant model endowed natural root and shoot growth. This study highlights the conceptual insights in designing of metal-free photocatalyst for environmental remediation.

Sonocatalytic degradation of tetracycline hydrochloride with CoFe2O4/g-C3N4 composite

In this work, different mass percent ratios of CoFe₂O₄ coupled g-C₃N₄ (w%-CoFe₂O₄/g-C₃N₄, CFO/CN) nanocomposites were integrated through a hydrothermal process for the sonocatalytic eradication of tetracycline hydrochloride (TCH) from aqueous media. The prepared sonocatalysts were subjected to various techniques to investigate their morphology, crystallinity, ultrasound wave capturing activity and charge conductivity. From the investigated activity of the composite materials, it has been registered that the best sonocatalytic degradation efficiency of 26.71 % in 10 min was delivered when the amount of CoFe₂O₄ was 25% in the nanocomposite. The delivered efficiency was higher than that of bare CoFe₂O₄ and g-C₃N₄. This enriched sonocatalytic efficiency was credited to the accelerated charge transfer and separation of e^--h⁺ pair through the S-scheme heterojunctional interface. The trapping experiments confirmed that all the three species i.e. ^•OH, h⁺ and ^•O₂^- were involved in the eradication of antibiotics. A strong interaction was shown up between CoFe₂O₄ and g-C₃N₄ in the FTIR study to support charge transfer as confirmed from the photoluminescence and photocurrent analysis of the samples. This work will provide an easy approach for fabricating highly efficient low-cost magnetic sonocatalysts for the eradication of hazardous materials present in our environment.

Ag-enhanced CeF3-O: highly enhanced photocatalytic performance under NIR light irradiation

CeF₃-O with intermediate band showed improved synergic photodegradation activity toward HCl-TC and RhB under NIR light irradiation when enhanced by Ag as a cocatalyst. Ag⁺ ions take electrons from the second transition in CeF₃-O's intermediate band, which are then reduced to Ag as cocatalyst. The photodegradation efficiencies of HCl-TC by various Ag/CeF₃-O nanoparticles in 180-min increase from 26.5 to 73.1%. The optimal Ag/CeF₃-O-100 is about 2.76 times that of pure CeF₃-O. Ag/CeF₃-O-100 has an apparent rate constant of 4.5 × 10^-3 min^-1, which is 3.0 times that of pure CeF₃-O. Similarly, Ag/CeF₃-O-10 achieves a superior photodegradation efficiency of RhB at 96.7% under NIR light within 120 min. Its apparent rate constant of 27.7 × 10^-3 min^-1 is 12.0 times that of pure CeF₃-O (2.3 × 10^-3 min^-1). Further, the turnover frequencies of Ag/CeF₃-O nanoparticles are greatly higher than that of the corresponding pure CeF₃-O nanoparticles. Ag-enhanced CeF₃-O has a unique metal-semiconductor interface where Ag acts as a bridge for facilitating charge transfer and the separation efficiency of photogenerated carries. The synergic effect between CeF₃-O and Ag provides a practical technique for enhancing the wastewater treatment with NIR light irradiation.

Hierarchical porous melamine sponge@MIL-101-Fe-NH2 composite as Fenton-like catalyst for efficient and rapid tetracycline hydrochloride removal

Metal-organic frameworks have been investigated in Fenton-like catalysis for tetracycline hydrochloride degradation, a widely used antibiotic which threatens the growth and health of creatures. However, powder phase and absence of large pores limit the materials' degradation performance and application. In this work, a hierarchical macro-meso-microporous composite melamine sponge@MIL-101-Fe-NH₂ was firstly designed and constructed. While the micropores provided plenty of active sites to generate reactive oxygen species, the macropores and mesopores accelerated mass transfer. Besides, MIL-101-Fe-NH₂ particles dispersed on melamine sponge individually, exposing more catalytic sites and avoiding inactivation caused by aggregation compared to powder catalysts. Its catalysis performance for tetracycline hydrochloride degradation was evaluated through changing various influence factors like H₂O₂ concentration, catalyst amount, pH and coexisting ions. Different from the preference of homogenous Fenton catalysts for pH 2-4, the composite displayed the most effective degradation at a subacid environment closer to nature with 77.24% in 30 min. Owing to the synergistic effect of hierarchical porous structure and monodispersed nanoparticles, the composite exhibited faster reaction rate and longer persistence compared to powder MIL-101-Fe-NH₂. Easy recycling and less ion leaching made it advantages for practical application. •OH, •O₂^- and ¹O₂ active species contributed together to the degradation and two main possible degradation pathways were put forward based on 35 detected intermediates.

NiFe2O4/g-C3N4 heterostructure with an enhanced ability for photocatalytic degradation of tetracycline hydrochloride and antibacterial performance

In this work, NiFe₂O₄/g-C₃N₄ heterostructure was prepared and used for the photocatalytic decomposition of tetracycline hydrochloride antibiotic and for inactivation of E. coli bacteria. The fabricated NiFe₂O₄/g-C₃N₄ composite displayed enhanced ability for photodegradation of organic pollutants and disinfection activities compared to the bare samples, because of the enhancement of visible light absorbance, heterojunction formation and photo-Fenton process. The optimized sample 10%-NiFe₂O₄/g-C₃N₄ has photodegraded 94.5% of tetracycline hydrochloride in 80 min. The active species trapping experiments revels that ·O₂^-, h⁺ and •OH are key decomposing species participated in the antibiotic degradation. It is hoped that the present study will provide a better understanding to fabricate efficient photocatalysts for the decomposition of organic pollutants and disinfection of bacteria.

The potential of a natural iron ore residue application in the efficient removal of tetracycline hydrochloride from an aqueous solution: insight into the degradation mechanism

In the existing research, most of the heterogeneous catalysts applied in the activation of persulfate to degrade organic pollutants were synthesized from chemical reagents in the laboratory. In this paper, we have obtained a spent iron ore (IO) residue directly collecting from the iron ore plants, and efficiently activating peroxydisulfate (PS) to produce reactive free radicals. The experimental results demonstrated that the IO could effectively activate PS to degrade tetracycline hydrochloride (TCH), with TCH removal rate reaching up to 85.6% within 2 h at room temperature. The TCH removal rate was increased with increasing iron ore dosage, while the more acidic pH condition would be favorable to TCH removal process. The material characterization results demonstrated that the dominant components of IO were Fe₃O₄ and FeOOH. The transformation from Fe(II) to Fe(III) at the surface IO was observed after TCH degradation. What's more, the quenching experiment and EPR detection results confirmed that the sulfate radical (SO₄^•-) and hydroxyl radicals (•OH) would be acting as the main free radicals for TCH degradation. This study could not only explore a novel way to recycle the discarded iron ore, but also further expand its application in an effective activation of PS in an aqueous solution.

Construction lamellar BaFe12O19/Bi3.64Mo0.36O6.55 photocatalyst for enhanced photocatalytic activity via a photo-Fenton-like Mo6+/Mo4+redox cycle

The novel BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55 composite materials were constructed as magnetically recyclable photo-Fenton-like degradation systems. The composite catalyst not only promoted the effective transfer of photo-generated electrons and improved the Mo⁶⁺/Mo⁴⁺ cycle consequent, but also activated hydrogen peroxide to generate oxidizing free radicals. BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55-0.25 exhibited an outstanding degradation performance for tetracycline hydrochloride it is 1.3 times to Bi_3.64Mo_0.36O_6.55. The thermal catalytic performance of the Bi_3.64Mo_0.36O_6.55 monomer is similar to that of the BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55 material without light. However, the removal rate of BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55 material reaches 84.5% after 60 min with light, far exceeding that of Bi_3.64Mo_0.36O_6.55 material. By way of the contrast experiment with light and without light, it is further demonstrated that interfacial interaction between BaFe₁₂O₁₉ and Bi_3.64Mo_0.36O_6.55 acted a key role in the photocatalytic reaction system. It is also a good advantage that pollutants can be efficiently degraded without adjusting the pH. The characterization of photocurrent and X-ray photoelectron spectroscopy (XPS) also further proved the synergy between the two materials, which is useful to the separation of electrons and holes. The synergy ultimately improves the degradation performance. Besides, BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55 can be easily separated by an external magnetic field after the photocatalytic activity reaction owing to BaFe₁₂O₁₉'s magnetic properties. It provides a new research idea for the construction and iron-based heterogeneous Fenton-like system for magnetic degradation of antibiotics.

Synthesis of γ-Fe2O3/La/Bi2WO6 composites for enhanced visible light-driven photocatalytic degradation of tetracycline hydrochloride

γ-Fe₂O₃/La/Bi₂WO₆ heterojunction composites have been successfully synthesized by simple and convenient hydrothermal method. The photocatalytic activity of the prepared samples was evaluated by the degradation of tetracycline hydrochloride (TCH) solution under simulated visible light irradiation. The results indicated that the removal rate of γ-Fe₂O₃/La/Bi₂WO₆ samples was higher than that of pure Bi₂WO₆ and La/Bi₂WO₆, among which 5%γ-Fe₂O₃/La/Bi₂WO₆ had the highest photocatalytic activity. The removal rate of TCH solution can reach 92.42% in 220 min. The as-prepared samples were characterized by scanning electron microscope (SEM), Fourier transform infrared spectra (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), and UV-vis diffuse reflectance spectrum (DRS). The material morphology of γ-Fe₂O₃/La/Bi₂WO₆ was nano-flake. γ-Fe₂O₃/La-doped Bi₂WO₆ did not damage the crystal phase and structure of Bi₂WO₆. Through getting insight into the mechanism, γ-Fe₂O₃/La doping increased the specific surface area of Bi₂WO₆ and inhibited the recombination of photogenerated electron pairs, thus enhancing the photocatalytic activity. h⁺ and ·O₂^- were the main active substances in the photocatalytic degradation of TCH solution by γ-Fe₂O₃/La/Bi₂WO₆ photocatalysts. In order to better explain the photocatalytic degradation process of TCH solution by γ-Fe₂O₃/La/Bi₂WO₆ photocatalyst, a possible removal mechanism was proposed for the first time. Moreover, γ-Fe₂O₃/La/Bi₂WO₆ sample is magnetic and easy to recover. At the same time, the high stability of γ-Fe₂O₃/La/Bi₂WO₆ sample can be reused.

Electrochemical degradation of tetracycline hydrochloride in sulfate solutions on boron-doped diamond electrode: The accumulation and transformation of persulfate

In this study, a novel electrifying mode (divided power-on and power-off stage) was applied in the system of BDD activate sulfate to degrade tetracycline hydrochloride (TCH). The BDD electrode could activate sulfate and H₂O to generate sulfate radicals (SO₄^•-) and hydroxyl radicals (^•OH) to remove TCH, and SO₄^•- could dimerize to form S₂O₈^2-. Then, the S₂O₈^2- was activated by heat and quinones to generate SO₄^•- for the continuous degradation of TCH during the power-off stage. In addition, the intermittent time has a significant effect on the degradation of TCH. Factors, affecting the accumulation of S₂O₈^2-, were analyzed using a full factorial design, and the accumulation of S₂O₈^2- could reach 16.2 mM in 120 min. The results of electron spin resonance and radical quenching test showed that SO₄^•-, ^•OH, direct electron transfer (DET), and non-radical in the system could effectively degrade TCH, and SO₄^•- was dominated. The intermediate products of TCH were analyzed by HPLC-QTOF-MS/MS, and the TCH mainly underwent hydroxylation, demethylation and ring opening reactions to form small molecules, and finally mineralized. The results of the feasibility analysis revealed that some intermediates have high toxicity, but the system could improve the toxicity. The results of energy consumption indicated that the intermittent electrifying mode could make full use of the persulfate generated during the power-on stage and reduce about 30% energy consumption. In conclusion, this work demonstrated that it was economically feasible to degrade TCH in wastewater by activating sulfate with BDD electrodes with an intermittent electrifying mode.

Direct Z-scheme mediated SmVO4/UiO-66-NH2 heterojunction nanocomposite for the degradation of antibiotic tetracycline hydrochloride molecules under sunlight

The use of tetracycline hydrochloride (TCH) for veterinary, human therapy, and agriculture has risen in the past few decades, making it to become one of the most exploited antibiotics. However, TCH residue in the environment is causing issues related to the evolution of antibiotic-resistant bacteria. To address such a problem, photodegradation offers a potential solution to decompose these pollutants in wastewater and thereby mitigates negative environmental impacts. In this context, the research focuses on the use of the rare-earth metal oxide samarium orthovanadate (SmVO₄) with nanorod structure, coupled with UiO-66-NH₂ for the photocatalytic degradation. Their photocatalytic activity to degrade antibiotic TCH molecules is explored under simulated solar light irradiation. The integration of UiO-66-NH₂ with SmVO₄ enhanced the light absorption, recombination resistance, carrier lifetime (from 0.382 to 0.411 ns) and specific surface area (from 67.17 to 246 m²/g) of the composite system as confirmed from multiple analyses. The obtained results further indicated that SmVO₄/UiO-66-NH₂ nanocomposites could form a direct Z-scheme based heterojunction. Such mechanism of charge transfer leads to the effective degradation of TCH molecules up to 50% in 90 min under solar light, while it is degraded only 30% in the case of bare-SmVO₄ nanorods. In this work, the incorporation of UiO-66-NH₂ positively influences photoelectrochemical properties and improves the overall photoredox properties of SmVO₄ for the degradation of complex compounds like antibiotic TCH molecules. Therefore, UiO-66-NH₂ can be proposed as an effective material to sensitize the rare-earth based photocatalytic material.