Fully dispersed cobalt diatomic site with significantly improved Fenton-like catalysis performance for organic pollutant degradation

A novel strategy for better catalytic performance in terms of precisely tuning the metal atom number of active centers is gradually getting attention. In this paper, the Co atom pair sites on N-doped porous carbon was engineered. The binuclear Co2 site structure was identified by aberration-corrected scanning transmission electron microscopy and X-ray absorption spectroscopy. As expected, the Co2NC display an outstanding Fenton-like catalysis activity in tetracycline degradation with turnover frequency exceeding 0.91 min-1 that is approximately 4 times higher than the conventional CoN4 site. The EPR tests indicated that the ROS strength stimulated by the binuclear site was much stronger than that of single site. Theoretical density functional theory calculations reveal that the optimized adsorption configuration is the O1 of peroxymonosulfate (PMS) interacting with two Co atoms, leading to stronger interaction effect and electron transfer for PMS comparing to single atom sites.

Synergistic oxidation induced by underwater bubbling plasma and diatomite-CoFe2O4 activated peroxymonosulfate for the degradation of ciprofloxacin hydrochloride

Underwater bubbling plasma (UBP) coupled with diatomite-CoFe2O4 (Dt-CFO) activated peroxymonosulfate (PMS) was proposed for the degradation of ciprofloxacin hydrochloride (CIP) in this work. The catalyst sample of Dt-CFO with large specific surface area, rich active sites and excellent magnetic property was prepared by the hydrothermal method and systematically characterized to investigate its material properties. The combination of UBP and Dt-CFO activated PMS (UBP/Dt-CFO/PMS) showed excellent synergy with the synergistic factor of 1.98, and reached the CIP degradation percentage of 94.7%, which corresponded to the kinetic constant of 0.097 min-1. Dt-CFO with the diatomite content of 30 wt% achieved the best catalytic activity in the reaction system. Higher catalyst and PMS dose, peak voltage, pulse frequency and lower initial CIP concentration were beneficial for CIP removal. The addition of Cl-, HCO3-, SO42- and humic acid suppressed CIP degradation, while NO3- had no effect on CIP removal. The Dt-CFO composite exhibited excellent reusability and low leaching metal amount, demonstrating its good stability. SO4-·, ·OH, ·O2-, 1O2, eaq, O3 and H2O2 were the active species confirmed to be involved in CIP degradation. The redox circles of ≡ Co(Ⅱ)/≡Co(Ⅲ) and ≡ Fe(Ⅱ)/≡Fe(Ⅲ) on Dt-CFO surface and the plasma-induced physicochemical effects dominated PMS activation. The decomposition process of CIP was explored through fluorescence spectra. Three degradation pathways were inferred, and the toxicity analysis showed the toxicity of CIP solution weakened after discharge treatment.

Persistent production of multiple active species with copper doped zinc gallate nanoparticles for light-independent photocatalytic degradation of organic pollutants

Photocatalysis is considered as an environmentally friendly and sustainable method as it can produce active species to degrade pollutants. However, its applications are hindered by the turbidity of pollutants and the requirements for continuous or repeated in situ irradiation. To avoid the need for continuous in situ irradiation in the photocatalytic process, herein we report the doping of Cu(II) ions into zinc gallate (ZnGa2O4) as traps to capture photo-generated electrons. In this way, long lifetime charge release and separation were effectively achieved for the persistent degradation of organic dyes in wastewater. The Cu(II) doped ZnGa2O4 (ZGC) nanoparticles with a small size about 7.7 nm synthesized via a hydrothermal method exhibited a persistent photocatalytic activity with continuous production of reactive oxygen species for at least 96 h without in situ irradiation due to its unique electronic structure and carrier transport path, and enabled to degrade 82.2 % of rhodamine B in 1 h. Further investigation revealed that the doped Cu(II) ions occupied the octahedral sites of ZGC and highly increased the persistent production and availability of active species for the persistent degradation of organic dyes under pre-illuminated conditions.

Exploring the mechanism of norfloxacin removal and active species evolution by coupling persulfate activation with biochar hybridized Fe3O4 composites

In situ growth of dispersed active sites on substrates is a strategy for designing highly efficient catalysts for sulfate radical (SO4•-)-based advanced oxidation processes (SR-AOPs). Here, magnetic biochar composite (Fe3O4/BC) was fabricated as an activator to trigger PDS (peroxydisulfate) for norfloxacin (NOR) removal, achieving reliable NOR removal efficiency (>90%) within 10 min. Based on the synergistic effect between Fe3O4 and BC, the removal rate increases to 0.0265 L mg-1 min-1. Fe3O4/BC exhibited decent adaptability, stability, and recyclability toward affecting factors variation during PDS activation, attributed to the synergistic effect between Fe3O4 and BC. The electron transfer of magnetic Fe3O4 coupled with the adsorption and conduction function of carbon skeleton, which overcomes typical problems as crystal agglomeration, metal leaching, and catalysts recovery etc. The electron-rich Fe(II) sites promote the radical pathway by generating reactive oxygen species (ROS, •OH, SO4•- and O2•-), and radicals evolution contributing to the form of 1O2 in non-radical pathway. Under the effect of multipath in NOR degradation, HPLC-QTOF-MS spectroscopy and DFT calculation revealed the possible degradation pathway of NOR. In addition, according to toxicity prediction, the overall NOR contamination toxicity of NOR was effectively alleviated by Fe3O4/BC + PDS system. Overall, this study presents a promising composite in PDS activation and views the active species evolution in the NOR removal system, which is crucial for mechanism study in relevant research in the future.

Underwater bubbling plasma assisted with persulfate activation for the synergistic degradation of tetracycline hydrochloride

The performance and mechanism of persulfate consisting of peroxymonosulfate (PMS) and peroxydisulfate (PDS) activation by underwater bubbling plasma (UBP) for the synergistic removal of tetracycline hydrochloride (TCH) were comparatively investigated. Both PMS and PDS addition significantly promoted the removal of TCH in UBP system, indicating persulfate exhibited highly synergistic effect with UBP. Furthermore, enhancing the persulfate dosage, peak voltage and pulse frequency, as well as reducing initial TCH concentration were favorable for the elimination of TCH. Compared with neutral condition, acidic and alkaline condition were advantageous to TCH removal. The presence of coexisting substances including Cl-, SO42- and humic acid (HA) had an adverse effect on TCH degradation, while Fe2+ could improve the removal of TCH. The degradation of ciprofloxacin and metronidazole proved the applicability for other antibiotics degradation of the reaction system. SO4-·, ·OH, ·O2-, hydrated electrons, O3 and H2O2 were the active substances responsible for TCH removal. The reduction of aqueous O3 concentration and enhancement of H2O2 concentration were observed after persulfate addition. UV-vis spectra and TOC analysis illustrated the addition of PMS or PDS facilitated the degradation and mineralization of TCH. 3D-EEMF spectra visually displayed the degradation process of TCH. Plausible degradation routes were deduced based on LC-MS and the toxicities of TCH and its intermediates were evaluated by Toxicity Estimation Software Tool.

Applications of vacancy defect engineering in persulfate activation: Performance and internal mechanism

The vacancy defects in heterogeneous catalysts have received extensive attention for persulfate (PS) activation. Vacancy defects can tune the electronic structure of metal oxides and generate unsaturated coordination sites. Meanwhile, the adsorption energy of reactants on catalyst surface is optimized. Thereby, the reaction energy barrier between catalysts and PS decreases, which could promote catalytic activation and accelerate pollutants degradation. Nowadays, oxygen vacancy (OV), nitrogen vacancy (NV), sulfur vacancy (SV), selenium vacancy (SeV) and titanium vacancy (TiV) have been widely studied with great potential for water remediation. So far, no review was reported regarding the vacancy activated persulfate systems. This paper summarized the types, preparation, mechanism and applications of vacancy in PS systems systematically. In addition, we put forward possible development of vacancy engineering in PS activation systems. It is expected that this review will contribute to the controllable synthesis and applications of vacancies in catalysts for PS activation and contaminants removal.

Thermal effect on sulfamethoxazole degradation in a trivalent copper involved peroxymonosulfate system

Persulfate (PS) activated by thermal or homogeneous metals can generate reactive oxygen species (ROS) and high-valence-state metals for contaminants degradation, showing great potential for applications. However, thermal effect in peroxymonosulfate (PMS) system with high-valence-state metal is still ambiguous. In this study, divalent copper (Cu(II)) catalysis was taken to explore thermal effect on PMS performance. Results showed that the Sulfamethoxazole (SMX) removal efficiency in the Cu(II)/PMS system at 60 min increased by only 5.9% with temperature increase from 30 °C to 60 °C. Moreover, SMX removal efficiency was excellent at neutral or basic pH, best with PMS concentration of 2.4 mM, and slightly affected by Cu(II) concentration. The singlet oxygen (¹O₂) was identified as main active species at low temperature while sulfate radicals (SO₄^-) was more effective at high temperature with Cu(II) co-activation. Also, trivalent copper (Cu(III)) was an important active species. The higher Cu(III) content, the better SMX removal efficiency, but the stronger intermediates toxicity. In combination with removal efficiency and intermediates toxicity at different temperatures, 30 °C was the optimal reaction temperature. Overall, this study provides new perspective on utilization of waste heat and high-valence-state metal for organic wastewater treatment in PMS systems.

Heterogeneous activation of peroxymonosulfate by magnetic hybrid CuFe2O4@N-rGO for excellent sulfamethoxazole degradation: Interaction of CuFe2O4 with N-rGO and synergistic catalytic mechanism

In order to address the low catalytic performance of magnetic CuFe₂O₄ caused by the agglomeration, low conductivity and potential metal ion leaching risk, N-doped reduced graphene oxide (N-rGO) with high charge density and rich active sites was employed as support to synthesize CuFe₂O₄@N-rGO (CuFe@NG), which was used for peroxymonosulfate (PMS) activation to degrade sulfamethoxazole (SMX). Results showed that the CuFe@NG/PMS system exhibited excellent degradation rate and mineralization efficiency on SMX in 60 min, which exceeded 93.15% and 31.96%, respectively. Besides, its degradation rate constants was 1.68 times higher than that of the CuFe₂O₄/PMS system. The enhanced performance could be mainly ascribed to the efficient synergistic activation of PMS by two components: I. the successful dispersion of CuFe₂O₄ on N-rGO and the interaction between them exposed more Fe³⁺-O^2- and Cu²⁺-O^2- active sites via decreasing size and aggregation of CuFe₂O₄ particles; II. the supported N-rGO supplied extra CO, C-OH and C-NC active groups, resulting in a large number of π electrons; III. the pyrrole N formed by further doping of N could activate the π electrons and reduce the energy barrier of electron transfer. The abundant active groups and sites and excellent electron transfer ability co-accelerate the production of active species. Specifically, surface-bound radical (•OH, SO₄^•-) and singlet oxygen ¹O₂ played a dominant role according to ESR and quenching tests. Furthermore, M-O-C binding site between two components enhanced catalyst stability and reduced metal leaching, leading to its availability on reusability in the 5 cyclic experiments. Lastly, CuFe@NG/PMS system also possessed a strong application ability in actual aquatic environment for SMX treatment.

Peroxymonosulfate activation using heterogeneous catalyst Sr2FeO4 coated on SBA-15 for efficient degradation of antibiotic sulfapyridine

It is significant to explore the advanced oxidation process (AOP) for antibiotic degradation. Herein, a peroxymonosulfate (PMS) activator, Sr₂FeO₄/SBA-15 (SFS) heterogeneous catalyst, was synthesized by in situ growth of Sr₂FeO₄ on the surface of SBA-15. In SFS/PMS catalytic system, Sr atom provided electrons to Fe(II) ↔Fe(III) ↔Fe(II) redox cycle through Sr-O-Fe bonds for PMS activation. The SFS catalyst could activate PMS to generate a free radical coexistence system, including sulfate radical (SO₄∙^-) and hydroxyl radicals (∙OH). The catalyst possessed high catalytic activity and high stability. The degradation efficiency of sulfapyridine (SAD) over the SFS/PMS catalytic system could reach 99.0% after 90 min reaction. After the 5th reuse, the degradation efficiency of SAD was still more than 94.0%, and the phase structure of the catalyst did not alter. The low ion leaching concentration would be more conducive to reuse and avoiding secondary pollution, in comparison to homogeneous catalysts. This catalyst can be widely applied to organic wastewater treatment.-->.

Photocatalytic degradation of pharmaceuticals by pore-structured graphitic carbon nitride with carbon vacancy in water: Identification of intermediate degradants and effects of active species

Pharmaceuticals are increasingly used in daily life and have been massively discharged to the aquatic environment. The removal of pharmaceuticals from water by various nanomaterials including graphitic carbon nitride (g-C₃N₄) has received extensive attention. Herein, we synthesized a carbon-defective carbon nitride with pore structure through a simple thermal polymerization method for photodegradation of lidocaine, mepivacaine and ropivacaine (typical amide local anesthetics). The results showed that the degradation process conformed to the pseudo-first-order reaction kinetics, and the degradation rate constant of organic pollutants using CCN-600 (i.e., g-C₃N₄ synthesized at 600 °C) reached 5.05 × 10^-2 min^-1, about 2.5 times higher than that of the prototype g-C₃N₄ (2.09 × 10^-2 min^-1). The capture experiment of active species and the electron paramagnetic resonance (EPR) test demonstrated that superoxide radical (O₂^-) played a major role in the degradation process. Based on the possible photodegraded intermediate products identified, the degradation pathways were deduced. This study provides not only a new strategy for fabrication of pore-structured g-C₃N₄ with carbon vacancy, but also a reference method for the treatment of pharmaceuticals in water bodies.

Peroxymonosulfate activation using a composite of copper and nickel oxide coated on SBA-15 for the removal of sulfonamide antibiotics

The sluggish Ni(II)/Ni(III) redox cycle does not benefit perxymonosulfate (PMS) activation for recalcitrant pollutant degradation. To solve this problem, a heterogeneous catalyst, Cu_0.2Ni_0.8O/SBA-15 (CNS), was constructed to activate PMS for decomposing two sulfonamide antibiotics, sulfachlorpyridazine (SACP) and sulfapyridine (SAP). SACP and SAP were completely degraded over Cu_0.2Ni_0.8O/SBA-15/PMS (CNSP) after 90 min. O₂^.- was the dominant active species involved in the degradation of SACP and SAP. Structural analysis and elemental valence state observations indicated that Cu(Ⅰ) provided electrons through Cu-O-Ni bonds to realize the charge compensation for Ni(Ⅲ) in the CNSP system. Thus, the in situ Cu(I)/Cu(II) promoting the Ni(II)/Ni(III) cycle could accelerate the PMS activation. This work provides new insights into the electron transfer between transition metals and the charge compensation mechanism for PMS activation. The degradation mechanism was proposed based on the XPS results before and after the reaction, a radical quenching test, and an EPR test. Combined with the SACP and SAP degradation intermediates identified by LC-MS, we suggest that the choice of treatment process depends on the occurrence of a steric hindrance effect between the molecular structure of the degradation target and free radicals.

A novel BiOX photocatalyst for the "green" degradation of polymers used in oilfields

The wastes from functional polymers (polyanionic cellulose, polyacrylamide, potassium polyacrylamide, and hydroxyethyl cellulose) generated during oil and gas exploration and development are harmful to biodiversity and human health. However, most traditional treatments are inefficient in degradation and cause secondary pollution. In this paper, BiOBr_0.5Cl_0.5 a 3D flower-like solid solution with in-situ deposition of elementary substance Bi and surface oxygen vacancies was synthesized by the hydrolysis and the redox methods. The chemical compositions, the morphologies, and the UV-visible absorption properties of Bi/BiOBr_0.5Cl_0.5 were characterized. Moreover, the photocatalytic activity of Bi/BiOBr_0.5Cl_0.5 and the kinetic behavior of the RhB photocatalytic degradation were investigated. The photocatalytic degradation of RhB followed a pseudo-first-order kinetic reaction, and Bi/BiOBr_0.5Cl_0.5-0.3 demonstrated the highest photocatalytic activity: The RhB degradation efficiency of Bi/BiOBr_0.5Cl_0.5-0.3 was 85%, and the COD removal rate of the functional polymers conducted by Bi/BiOBr_0.5Cl_0.5-0.3 was greater than 80%. The exciton photocatalytic processes of Bi/BiOBr_0.5Cl_0.5 was found through the electron spin resonance (ESR) and the active-species trapping analyses of the photocatalytic degradations of RhB by Bi/BiOBr_0.5Cl_0.5. In summary, in this paper, the synthesis methods of Bi/BiOBr_0.5Cl_0.5 photocatalyst and the photocatalytic activity of the Bi/BiOBr_0.5Cl_0.5 on the degradations of polymers used in oilfields were reported, addressing the shortcomings of the existing treatments for polymer waste fluids that are incorporated into the oil and gas exploration and development process.

Activation and characterization of environmental catalysts in plasma-catalysis: Status and challenges

Plasma-catalysis has attracted great attentions in environmental/energy-related fields, but the synergetic mechanism still suffers intractable defects. Key issues are that what kind of catalysts are applicable for plasma system, how are they activated in plasma, and how to characterize them in plasma. This review systematically gives a comprehensive summarization of the selection of catalysts and its activation mechanism in plasma, based on the character of plasma, including physical effects containing the enhancement of discharge intensity and adsorption of reactants, and the utilization of plasma-generated active species such as·O, heat, O₃, ultraviolet light and e* . Focus is given to the illumination of the activation mechanisms of catalysts when placed in plasma zone. Subsequently, the novel characterization techniques for catalysts, which may associate properties to performance, are critically overviewed. The challenges and opportunities for the activation and characterizations of catalysts are proposed, and future perspectives are suggested about where the efforts should be made. It is expected that a bridge between catalysts design and character of plasma can be built to shed light on the synergetic mechanism for plasma-catalysis and design of new plasma-catalysis systems.

Insights into the degradation mechanisms and pathways of cephalexin during homogeneous and heterogeneous photo-Fenton processes

The widespread occurrence of antibiotics in the environment poses a potential threat to human health. The photo-Fenton process has demonstrated better degradation performance compared with the conventional wastewater treatment processes. In this study, the degradation of cephalexin was evaluated comparatively by homogeneous (Fe²⁺/H₂O₂/UV) and heterogeneous (MoS₂@Fe/H₂O₂/UV) photo-Fenton processes. Key influencing factors affecting photo-Fenton performance were assessed, confirming the optimum Fe²⁺ concentration at 0.2016 mg L^-1 and H₂O₂/Fe²⁺ molar ratio at 6. Higher degradation efficiency (73.10%) and pseudo-first-order degradation rate constant (0.0078 min^-1) were achieved with the assistance of MoS₂@Fe as the heterogeneous catalyst. Completely different degradation products were identified in the homogeneous and heterogeneous photo-Fenton processes, with main degradation pathways proposed as β-lactam ring-opening, sulfoxide formation, demethylation, N-dealkylation, decarbonylation, hydroxylation and deamination in the Fe²⁺/H₂O₂/UV system and β-lactam ring-opening, hydroxylation, dehydration, amide hydrolysis, and demethylation and ring contraction in the MoS₂@Fe/H₂O₂/UV system, respectively. The formation of newly identified products might root in the attack on cephalexin from active species (i.e., OH, h⁺, e^-, O₂^-) photoinduced by the MoS₂@Fe catalyst. Results also indicated the importance of understanding the underlying mechanisms and pathways to eliminate the antimicrobial activities of antibiotics in the future.

Construction of visible light driven silver sulfide/graphitic carbon nitride p-n heterojunction for improving photocatalytic disinfection

Compared with the Z-scheme and type-II heterojunctions, p-n type heterojunctions are more favorable for the migration of photo-induced carriers owing to the advantage of built-in electric fields. In addition, it is still of great significance to understand the carrier migration properties of the p-n heterojunction. Therefore, the development of new p-n heterojunctions and the development of high-efficiency catalysts with effective modulation of light responsiveness and rapid transfer of charge to achieve photocatalytic inactivation have attracted much attention. In this study, we synthesized a Ag₂S/g-C₃N₄ heterojunction via the in situ deposition of Ag₂S onto the g-C₃N₄ substrate. The prepared Ag₂S/g-C₃N₄ composite facilitated photo-generated charge carrier transfer and exhibited outstanding photocatalytic inactivation of bacteria compared to that of a single catalyst under visible light irradiation. In addition, the ACN-2 composites fully deactivated 7 log10 CFU/mL E. coli and 7 log10 CFU/mL S. aureus cells in 90 min under visible light. The quenching experiments confirmed that photo-generated active species (O₂^-, OH, and h⁺) were the major reactive oxygen species that contributed to the inactivation of bacteria. Energy band alignment analysis indicated that a type-II band alignment was formed in the p-n heterostructure, thereby providing strong support for the photocatalytic mechanism. This study not only provides insights into the design of p-n heterostructures, but also presents a promising strategy to enhance the photocatalytic capacities of g-C₃N₄ based materials for pathogen inactivation.

Landfill leachate treatment by persulphate related advanced oxidation technologies

Landfill leachate is produced from garbage decomposition with highly toxic and bio-refractory compounds, which poses serious harm to environmental security and human health. Thus, it is urgent to treat landfill leachate properly. Persulfate (PS) oxidation has attracted extensive attentions in terms of fast reaction speed, non-selectivity to target pollutants and thorough oxidation. In recent years, PS oxidation has been widely adopted for landfill leachate purification. However, the related results have been rarely summarized. In this review, the treatment of landfill leachate by PS oxidation system is discussed systematically including oxidants, activation modes and oxidation mechanisms. In addition, the current situation of PS oxidation system and other coupled systems for landfill leachate treatment is also summarized. Finally, the challenges and future research directions of landfill leachate treatment based on PS oxidation process are proposed. Meaningfully, this review will provide valuable references for the development of landfill leachate treatment process, promoting the application of advanced oxidation technology in landfill leachate treatment.

Interaction of the potent antitumoral compounds Casiopeinas® with blood serum and cellular bioligands

Casiopeinas® are among the few Cu^II compounds patented for their antitumor activity, but their mode of action has not been fully elucidated yet. One of them, Cas II-gly, is formed by 4,7-dimethyl-1,10-phenanthroline (Me₂phen) and glycinato (Gly). In blood and cells, Cas II-gly can keep its identity or form mixed species with serum or cytosol bioligands (bL or cL) with composition Cu^II-Me₂phen-bL/cL, Cu^II-Gly-bL/cL, or Cu^II-bL/cL. In this study, the binding of Cas II-gly with low molecular mass bioligands of blood serum (citric, L-lactic acid, and L-histidine) and cytosol (reduced glutathione (GSH), reduced nicotinamide adenine dinucleotide (NADH), adenosine triphosphate (ATP), and l-ascorbic acid) was examined through the application of instrumental (ElectroSpray Ionization-Mass Spectrometry and Electron Paramagnetic Resonance) and computational (Density Functional Theory) methods. The results indicated that mixed species Cu^II-Me₂phen-bL/cL are formed, with the bioligands replacing glycinato. The formation of these adducts may participate in the copper transport toward the target organs and facilitate the cellular uptake or, in constrast, preclude it. In the systems with GSH, NADH and L-ascorbate, a redox reaction occurs with the partial oxidation of cL to the corresponding oxidized form (GSSG, NAD⁺ and dehydroascorbate) which interact with Cu^II. Formed Cu^I ion does not give complexation reactions with reduced or oxidized form of bioligands for its 'soft' character and low affinity for oxygen and nitrogen donors compared to Cu^II. However, Cu^I could promote Fenton-like reactions with production of reactive oxygen species (ROS) related to the antitumor activity of Casiopeinas®.

Unveiling the catalytic ability of carbonaceous materials in Fenton-like reaction by controlled-release CaO2 nanoparticles for trichloroethylene degradation

Carbonaceous materials (CMs) have been applied extensively for enhancing the catalytic performance of environmental catalysts, however, the self-catalytic mechanism of CMs for groundwater remediation is rarely investigated. Herein, we unveiled the catalytic ability of various CMs via Fe(III) reduction through polyvinyl alcohol-coated calcium peroxide nanoparticles (PVA@nCP) for trichloroethylene (TCE) removal. Among selected CMs (graphite (G), biochar (BC) and activated carbon (AC)), BC and AC showed enhancement of TCE removal of 89% and 98% via both adsorption and catalytic degradation. BET and SEM analyses showed a higher adsorption capacity of AC (27.8%) than others. The generation of solution-Fe(II) and surface-Fe(II) revealed the reduction of Fe(III) on CMs-surface. The role of O-containing groups was investigated by the FTIR technique and XPS quantified the 52% and 57% surface-Fe(II) in BC and AC systems, respectively. EPR and quenching tests confirmed that both solution and surface-bound species (HO•, O₂^-• and ¹O₂) contributed to TCE degradation. Acidic pH condition encouraged TCE removal and the presence of HCO₃^- negatively affected TCE removal than other inorganic ions. Both schemes (PVA@nCP/Fe(III)/BC and PVA@nCP/Fe(III)/AC) exhibited promising results in the actual groundwater, surfactant-amended solution, and removal of other chlorinated-pollutants, opening a new direction towards green environmental remediation for prolonged benefits.

Degradation of fluoroquinolones in homogeneous and heterogeneous photo-Fenton processes: A review

Fluoroquinolone antibiotics are frequently detected in the environment causing potential hazards to ecological and human health. Inadequate removal efficiencies were reported for fluoroquinolones during conventional wastewater treatment processes whereas the application of photo-Fenton reactions has attracted much attention due to their high reaction rate. This article summarizes the recent proceedings on homogeneous and heterogeneous photo-Fenton degradation of fluoroquinolones. Degradation efficiencies of fluoroquinolones were discussed as well as rate constants for a distinct comparison. The influences of initial fluoroquinolone concentration, H₂O₂, Fe²⁺, pH and temperature were also investigated on homogeneous photo-Fenton degradation of fluoroquinolones. The currently applied heterogenous catalysts were considered including iron oxides catalysts, iron-based composite catalysts and iron-based semiconductor. In addition, the degradation pathways for typical fluoroquinolones were proposed with the products identified in the literature. The results indicated the better performance with the aid of heterogeneous catalysts due to the generation of more active species. Intermediate products at smaller molecular weight were obtained through various types of pathways under heterogeneous photo-Fenton degradation of fluoroquinolones, implying a practical application with biological treatment processes for fully mineralization.

Enhanced peroxymonosulfate activation over heterogeneous catalyst Cu0.76Co2.24O4/SBA-15 for efficient degradation of sulfapyridine antibiotic

The largest source of resistant bacteria or viruses is the overuse and misuse of antibiotics in humans and animals. These resistant bacteria or viruses may evolve into superbacteria or superviruses, which causes global plague. Therefore, it is significant to find a highly efficiency and low-cost method to eliminate antibiotics in water environment from inappropriate discharge. Here, a highly active and highly stable heterogeneous catalyst, Cu0.76Co2.24O4/SBA-15 (CCS) was prepared for peroxymonosulfate (PMS) activation in aim of decomposing persistent sulfapyridine (SPD). The reaction mechanism was thoroughly investigated via in situ quenching test and in situ electron paramagnetic resonance. Four reactive species, SO4·-, O2·-, 1O2 and ·OH were generated in Cu0.76Co2.24O4/SBA-15/PMS (CCSP) system. The SO4·- and O2·- were dominant active species responsible for SPD degradation. Co(Ⅱ)↔Co(Ⅲ)↔Co(Ⅱ) redox reaction cycle was constructed due to the different redox potential of Co(Ⅱ)/Co(Ⅲ), HSO5-/SO4∙-, and HSO5-/SO5∙-. Interestingly, Cu(Ⅰ) could urge the redox reaction cycle for PMS activation to be more thermodynamically feasible. Therefore, CCS possessed a highly catalytic activity and excellent stability. Meanwhile, the anions interference test indicated Cl-, NO3-, HCO3-, and H2PO4- had almost no inhibitory effect on SPD degradation over this catalytic system. We sincerely expected that this catalyst system would be applied extensively into antibiotics degradation in real water bodies.

Enhanced visible light photoelectrocatalytic degradation of tetracycline hydrochloride by I and P co-doped TiO2 photoelectrode

Elimination of antibiotics such as tetracycline hydrochloride (TC) from wastewater is of great significance, but still faces challenges. Herein, for the first time, I and P co-doped TiO₂ catalysts were prepared via a hydrolysis method. We also reported a simple method to prepare I and P co-doped TiO₂ photoelectrodes, which exhibited preeminent photoelectrocatalytic (PEC) performance for the decomposition of TC. The synergistic effect of I and P co-doping could significantly improve the charge separation rate and enhance the light absorption capacity of TiO₂, leading to an enhancement of PEC activity. The main factors affecting the PEC performance were investigated, and the highest degradation rate constant (4.20 × 10^-2 min^-1) was achieved when the doping content of P was 4 at% (ITP-4 photoelectrode) at pH 11.02 under visible light. The Langmuir-Hinshelwood kinetic model and active species trapping experiments were selected to investigate the degradation mechanism of TC. The results suggest that the hydroxyl radicals and photogenerated holes were the main active species that were responsible for the decomposition of TC. Moreover, the degradation pathways of TC based on the intermediates also demonstrated that the hydroxyl radicals and holes showed a principal role in degrading TC.

Experimental study of nitrobenzene degradation in water by strong ionization dielectric barrier discharge

Nitrobenzene (NB) is toxic and carcinogenic aromatic compound widely used in several industries which is ultimately found in their effluents. In this work, dielectric barrier discharge (DBD) reactor was employed for the degradation of nitrobenzene in aqueous solution. Active species like O₃ and ^•OH produced by DBD reactor were mixed with water which degraded the NB. The results indicated that the lower NB concentrations slightly acidic conditions and high voltage ranges showed the optimum efficiencies. Moreover, the impacts of active species inhibitors isopropyl alcohol (IPA), tert-butanol (TBA), inorganic ions for instance sulfates ( S O 4 2 - ), bicarbonates ( H C O 3 - ), nitrates ( N O 3 - ), carbonates ( C O 3 2 - ) and chlorides (Cl^-) on the degradation of NB were examined. This analysis showed that the hydroxyl radical was captured by the addition of these inhibitors and resulted in the decrease in efficiencies. Byproducts produced during the degradation of nitrobenzene were assessed by analytical techniques of high-performance liquid chromatography (HPLC), liquid chromatography-mass spectrometry (LC-MS), UV-visible spectroscopy and total organic carbon (TOC) analysis. Main intermediate products were nitrophenols and low molecular weight organic acids including oxalic acid and acetic acid that were eventually mineralized to CO₂ and H₂O. The dielectric barrier discharge technology was found productive for the degradation of nitroaromatic compounds.

One-pot synthesis of Fe/Cu-SSZ-13 catalyst and its highly efficient performance for the selective catalytic reduction of nitrogen oxide with ammonia

Series of Fe/Cu-SSZ-13 catalysts with different Fe loading content were synthesized by simple one-pot strategy. The obtained catalysts were subjected to selective catalytic reduction (SCR) of NO_x with NH₃ and were characterized by various techniques. The results show that Fe_0.63/Cu_1.50-SSZ-13 catalyst with proper Fe content exhibits excellent catalytic activity with widest operation temperature window from 160 to 580°C, excellent hydrothermal stability as well as good resistance to sulfur poisoning when compared with Cu-SSZ-13, signifying its great potential for practical applications. Further characterizations reveal that the synthesized Fe/Cu-SSZ-13 catalysts present typical chabazite (CHA) structure with good crystallinity, while isolated Cu²⁺ and monomeric Fe³⁺ are revealed as the predominant copper and iron species. At low temperatures, isolated Cu²⁺ species act as primary active sites for SCR reaction, while monomeric Fe³⁺ species provide sufficient active sites for sustain the SCR activity at high temperature. Moreover, Fe over doping would lead to the damage of zeolite structure, destruction of isolated Cu²⁺ site, as well as the formation of highly oxidizing Fe₂O₃, thus causing deterioration of catalytic performances.

Surface activation towards manganese dioxide nanosheet arrays via plasma engineering as cathode and anode for efficient water splitting

Developing high-efficiency, low-cost electrocatalysts for water splitting is important but challenging. Two-dimensional nanosheet manganese dioxide (MnO₂) arrays are promising candidates for the design and development of advanced catalysts because of their large surface area. Here, a feasible solution to improve the catalytic activity of MnO₂ materials via decorating the active sites on the surface is proposed. With the help of plasma engineering, we successfully enabled surface activity of the MnO₂ nanosheets by decorating P or Fe species together with rich vacancies on the surface. The decorated P (P-MnO₂) or Fe (Fe-MnO₂) species were highly beneficial for the absorption of protons and OH^- respectively, and rich oxygen vacancies induced the formation of stable Mn³⁺, which contributed to electron and charge transfer. Thus, increased electrochemically active specific areas, accelerated charge transfer, and a proper surface electronic structure could be achieved. On the basis of this activation strategy, the fabricated P-MnO₂ and Fe-MnO₂ showed excellent catalytic performance for the hydrogen evolution and oxygen evolution reactions. To our knowledge, the performance of P-MnO₂ and Fe-MnO₂ outperformed most MnO₂-based electrocatalysts in the field of electrocatalytic water splitting. Surface activation of two-dimensional MnO₂ materials by decorating active species via plasma treatment can provide a feasible route for modulating the performance of earth-abundant electrocatalysts for practical applications.

A simple and facile bioinspired catalytic strategy to decolorize dye wastewater by using metal octacarboxyphthalocyanine particles

To explore the simple, facile, environmental friendly and low cost catalytic technique to decolorize harmful dye contaminants in solution and understand the mechanism is an interesting and practical research. In this paper, we provide a highly efficient and convenient method for fast decolorization of dyes (methylene blue and rhodamine B) in aqueous solution catalyzed by iron octacarboxyphthalocyanine (FeOCPc) or cobalt octacarboxyphthalocyanine (CoOCPc). Compared to the traditional methods, our method is very simple. The 30 mg/L methylene blue could be decolorized almost absolutely less than 30 min just by dispersing FeOCPc powders into the dye solution. The decolorization of rhodamine B at high concentration (30 mg/L) could be achieved to 100% decolorization degree less than 20 min in the presence of FeOCPc and tert-butyl hydroperoxide (BuOOH). Moreover, the ESR and HPLC-MS measurement were performed to determine the active radicals and various intermediates in decolorization processes and the possible catalytic mechanism was proposed. It is noted that both FeOCPc and CoOCPc catalysts show the different catalytic oxidation behaviors depending on the oxidant (O₂ or BuOOH). Our investigation provides a novel, low cost and convenient strategy to purify the environmental pollutions.

Effect of preparation methods on the performance of CuFe-SSZ-13 catalysts for selective catalytic reduction of NOx with NH3

CuFe-SSZ-13 catalyst showed excellent performance in the selective catalytic reduction of NO_x with NH₃ (NH₃-SCR) for diesel engine exhaust purification. To investigate the effect of preparation methods on NH₃-SCR performance, Fe was loaded into one-pot synthesized Cu-SSZ-13 catalysts through solid-state ion-exchange (SSIE), homogeneous deposition precipitation (HDP) and liquid ion-exchange (IE), respectively. Three CuFe-SSZ-13 catalysts showed similar SO₂ resistance, which was better than that of Cu-SSZ-13. The improvement was attributed to the protection of Fe species. Hydrothermal stability of three CuFe-SSZ-13 catalysts was significantly different, which was attributed to the state of active species caused by different preparation methods. Compared with the other two catalysts, more active species existed inside the zeolite pores of CuFe-SSZ-13_SSIE. During hydrothermal aging, the aggregation of these active species in the pores caused the collapse of catalyst structure, ultimately leading to the deactivation of CuFe-SSZ-13_SSIE. In contrast, Fe species was dispersed better on the surface over CuFe-SSZ-13_IE, enhancing the hydrothermal stability of catalysts. Consequently, Fe loading effectively improved the resistance of SO₂ and H₂O over Cu-SSZ-13. For CuFe-SSZ-13, large amounts of active species located inside the zeolite pores are not beneficial for the hydrothermal stability.

Kinetic study on photocatalytic degradation of Acid Orange 52 in a baffled reactor using TiO2 nanoparticles

In this study, a baffled photocatalytic reactor was used for the treatment of colored wastewater containing the azo dye of Acid Orange 52 (AO52). A study on the active species of the photocatalytic process using TiO₂ nanoparticles indicated that hydroxyl radical and superoxide have the greatest contribution to the dye degradation process respectively. Given that a level of biological oxygen demand/chemical oxygen demand (BOD₅/COD) equal to 0.4 was achieved after about 5 hr from the beginning of the experiment, the reactor seems to be capable of purifying the wastewater containing AO52 dye after this time in order to discharge into a biological treatment system to continue the treatment process. The results of the liquid chromatography-mass spectrometry (LC-MS) test showed that during the first 4 hr of the experiment, with the breakdown of the azo bond, the contaminant was decomposed into the benzene annular compounds with less toxicity indicating a reduction in the toxicity of wastewater after removing the dye agent. The study on the kinetics of these reactions followed the pseudo-first-order kinetic model in all conditions and corresponded well to Langmuir-Hinshelwood model. According to the kinetic model for the simultaneous occurrence of possible pathways, the kinetic constant of production and degradation of intermediate products in optimal conditions was estimated to be between 0.0029 and 0.0391 min^-1.

Facile synthesis of magnetic Fe3O4@BiOI@AgI for water decontamination with visible light irradiation: Different mechanisms for different organic pollutants degradation and bacterial disinfection

Magnetic Fe₃O₄@BiOI@AgI (FBA) spheres were synthesized through a multi-step process. The fabricated photocatalysts were characterized by different techniques. To testify the visible light driven photocatalytic activity of FBA, Rhodamine B and Bisphenol A were chosen as model common and emerging organic contaminants, respectively. While, gram-negative strain Escherichia coli was selected as model waterborne bacteria. The results showed that under visible light irradiation, FBA contained strong photocatalytic degradation capacity towards both RhB and BPA. Moreover, FBA was also found to exhibit excellent disinfection activity towards E. coli. The photocatalytic mechanisms for different pollutants by FBA were determined and found to vary for different pollutants. Specifically, scavenger experiments, degradation intermediates determination, as well as theoretical density functional theory (DFT) analysis showed that RhB and BPA were degraded via photosensitization (dominated by e^- and ·O₂^-) and direct photocatalytic oxidation (contributed by h⁺, e^- and ·O₂^-), respectively. Whereas, E. coli cells yet were found to be inactivated by the generation of e^- and ·O₂^- rather than by the released Ag⁺. Since it contained superparamagnetic property, FBA could be easily separated from the reaction suspension after use. Due to the excellent photo stability, FBA exhibited strong photocatalytic activity in the fourth reused recycle. Therefore, FBA could serve as a promising alternative for water purification.

Efficient bacterial inactivation with Z-scheme AgI/Bi2MoO6 under visible light irradiation

A novel Z-scheme AgI/Bi₂MoO₆ hybrid photocatalyst was fabricated via a solvothermal-precipitation approach to disinfect bacteria in water. Powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopic (SEM) equipped with energy-dispersive X-ray spectroscopy (EDX), high resolution transmission electron microscope (HRTEM), UV-vis diffuse reflectance spectra (DRS), as well as photoluminescence spectra (PL) were employed to characterize the fabricated photocatalyst. Due to the stronger redox potential and better separation of charge carriers induced by the Z-scheme structure, the optimal synthesized AgI/Bi₂MoO₆ exhibited excellent disinfection activity towards both Gram-negative strain Escherichia coli (E. coli) and Gram-positive strain Staphylococcus aureus (S. aureus) under visible light irradiation. 5.0 × 10⁷ CFU mL^-1 of E. coli and S. aureus cells were completely disinfected within 30 min and 90 min, respectively. Ag⁺ ions did not contribute to the disinfection activity, while active species including h⁺, O₂^-, e^-, and H₂O₂ contributed to the cell inactivation. By changing the interaction force and being involved in the photocatalytic reactions, the common anions (Cl^-, NO₃^-, SO₄^2-, and H₂PO₄^-) would affect the disinfection activity. Moreover, AgI/Bi₂MoO₆ exhibited effective disinfection activity in four consecutive reused cycles. Thus, AgI/Bi₂MoO₆ could be used as a promising photocatalyst for water disinfection.

Support-dependent active species formation for CuO catalysts: Leading to efficient pollutant degradation in alkaline conditions

Redox metal ions play the crucial role in versatile advanced oxidation technologies, in which controlling the active species formation through catalyst design is one of the key challenges in oxidant utilization. This work describes an example of different active species formations in CuO-mediated degradation just because of supporting material differences. Although three CuO catalysts were prepared by similar procedures, it was found that CuO-MgO catalyst demonstrated high efficiency in phenol degradation with bicarbonate activated H₂O₂, in which the superoxide radical is crucial, while hydroxyl radical and singlet oxygen are ignorable. For the CuO-MgO-Al₂O₃ and CuO-Al₂O₃ catalysts, the degradation proceeds by popular hydroxyl radical based process, however, the efficiency was poor. The EPR experiments also confirmed the absence of hydroxyl radical in CuO-MgO system but its presence in CuO-MgO-Al₂O₃ and CuO-Al₂O₃ system. The high catalytic efficiency with ignorable hydroxyl radical in the CuO-MgO system leads us to propose that an alternative Cu(III) species dominates the degradation. The basic MgO support may facilitate the formation of the Cu(III) species, whereas the neutral MgO-Al₂O₃ and acidic Al₂O₃ supports are unable to stabilize the high valent Cu(III) species, leading to the common hydroxyl radical mechanism with low efficiency of H₂O₂ in alkaline conditions.

Research on the degradation mechanism of pyridine in drinking water by dielectric barrier discharge

Pyridine, an important chemical raw material, is widely used in industry, for example in textiles, leather, printing, dyeing, etc. In this research, a dielectric barrier discharge (DBD) system was developed to remove pyridine, as a representative type of nitrogen heterocyclic compound in drinking water. First, the influence of the active species inhibitors tertiary butanol alcohol (TBA), HCO₃^-, and CO₃^2- on the degradation rate of pyridine was investigated to verify the existence of active species produced by the strong ionization discharge in the system. The intermediate and final products generated in the degradation process of pyridine were confirmed and analyzed through a series of analytical techniques, including liquid chromatography-mass spectrometry (LC-MS), high performance liquid chromatography (HPLC), ion chromatography (IC), total organic carbon (TOC) analysis, ultraviolet (UV) spectroscopy, etc. The results showed that the degradation of pyridine was mainly due to the strong oxidizing power of ozone and hydroxyl radical produced by the DBD system. Several intermediate products including 3-hydroxyl pyridine, fumaric acid, 2, 3-dihydroxypyridine, and oxalic acid were detected. Nitrogen was removed from the pyridine molecule to form nitrate. Through analysis of the degradation mechanism of pyridine, the oxidation pathway was deduced. The study provided a theoretical and experimental basis for the application of DBD strong ionization discharge in treatment of nitrogen heterocyclic compounds in drinking water.

New insights into how RGO influences the photocatalytic performance of BiOIO3/RGO nanocomposites under visible and UV irradiation

Reduced graphene oxide (RGO) has been demonstrated to be effective in enhancing the photocatalytic activity of various semiconductors. However, an important issue that has been overlooked is the role of RGO in UV-induced photocatalysis of RGO-based nanocomposites. In the present work, novel BiOIO3/RGO nanocomposites were prepared by a simple one-pot hydrothermal method, during which BiOIO3 nanoplates were formed in situ on RGO sheets resulting from partial reduction of RGO. The two components of the composite displayed intimate interfacial contact. The as-prepared BiOIO3/RGO nanocomposites exhibited highly enhanced visible photocatalytic activity, relative to that of pure BiOIO3, toward removal of NO from air. However, the BiOIO3/RGO nanocomposites showed only slightly increased photocatalytic activity, relative to pure, under UV irradiation. The limited enhancement of UV activity can be ascribed to the fact that BiOIO3 would be expected to compete with RGO with regard to absorption and utilization of UV light. Evidence shows that RGO can act as a semiconductor rather than a photosensitizer or electron reservoir in BiOIO3/RGO nano-composites. In addition, the active species responsible for photoactivity have been investigated by a DMPO spin-trapping electron spin resonance technique. Photo-generated holes were found to be the main active species inducing the photo-oxidation of NO under visible light, whereas holes and OH radicals are considered to be responsible for photo-activity under UV light. This work points to BiOIO3/RGO nano-composites as new and efficient visible light photocatalysts for environmental remediation applications, and also as a source of new insights into the pivotal role of RGO in photocatalysis of RGO-based nanocomposites under visible as well as UV light.

Evaluation of the potential of soil remediation by direct multi-channel pulsed corona discharge in soil

A novel approach, named multi-channel pulsed corona discharge in soil, was developed for remediating organic pollutants contaminated soil, with p-nitrophenol (PNP) as the model pollutant. The feasibility of PNP degradation in soil was explored by evaluating effects of pulse discharge voltage, air flow rate and soil moisture on PNP degradation. Based on roles of chemically active species and evolution of degradation intermediates, PNP degradation processes were discussed. Experimental results showed that about 89.4% of PNP was smoothly degraded within 60min of discharge treatment at pulse discharge voltage 27kV, soil moisture 5% and air flow rate 0.8Lmin(-1), and the degradation process fitted the first-order kinetic model. Increasing pulse discharge voltage was found to be favorable for PNP degradation, but not for energy yield. There existed appropriate air flow rate and soil moisture for obtaining gratifying PNP degradation efficacy. Roles of radical scavenger and measurement of active species suggested that ozone, H2O2, and OH radicals played very important roles in PNP degradation. CN bond in PNP molecule was cleaved, and the main intermediate products such as hydroquinone, benzoquinone, catechol, phenol, acetic acid, formic acid, oxalic acid, NO2(-) and NO3(-) were identified. Possible pathway of PNP degradation in soil in such a system was proposed.