Development and validation of a QuEChERS-HPLC-DAD method using polymer-functionalized melamine sponges for the analysis of antipsychotic drugs in milk

The prohibition of antipsychotic drugs in animal foodstuffs has raised significant concerns. In this study, a novel matrix purification adsorbent comprising a polymer (polyaniline and polypyrrole)-functionalized melamine sponge (Ms) was employed for the high performance liquid chromatography-diode array detector (HPLC-DAD) detection of three phenothiazines (chlorpromazine, thioridazine, and promethazine), and a tricyclic imipramine in milk. The as-prepared functionalized Ms was characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, and water contact angle measurements. Excellent linearity with a coefficient of determination (R2) of 0.999 was achieved for all drugs within the concentration range of 0.01-47.00 μg mL-1. The recoveries of the four analytes ranged from 92.1 % to 106.9 % at the three spiked levels. These results demonstrate the successful application of the proposed method for the determination of the four drugs. Cost-effective polymer-functionalized Ms is a viable alternative for matrix purification, enabling rapid determination of drug residues in diverse food samples.

Free-standing and flexible polyvinyl alcohol-sodium alginate-polypyrrole electrodes based on interpenetrating network hydrogels

Flexible supercapacitors (FSCs) have attracted much attention due to their strong mechanical flexibility, wearability and portability, which greatly rely on the employed flexible electrodes. The conductive polymer hydrogels with excellent flexibility, processability and capacitive performance are one of the most promising candidates, which are still limited by their poor mechanical properties. Constructing robust interpenetrating polymer networks (IPN) is an effective approach to promote their mechanical properties. Herein, interpenetrating polyvinyl alcohol (PVA)-sodium alginate (SA)-polypyrrole (PPy) hydrogels are prepared by the freeze-thaw and in-situ polymerization method. The IPN structure composed of PVA and SA not only enhances the mechanical properties of hydrogels, but also provides substantial active sites for electrochemical reactions. Moreover, the hydrogen-bonding interaction between different components in the PVA-SA-PPy hydrogel boosts the charge/ion transfer. The optimal PVA-SA-PPy hydrogels show an elongation at break of 380 %, a tensile strength of 1.5 MPa, and a specific capacitance of 2646 mF cm-2 at 2 mA cm-2. The symmetric PVA-SA-PPy FSCs show an energy density of 96.7 μWh cm-2 at a power density of 999.9 μW cm-2, and the capacitance retention is 66.3 % after 10,000 cycles. These exceptional mechanical and electrochemical properties make the PVA-SA-PPy hydrogels a promising candidate for FSCs.

Design and synthesis of polypyrrole conductive ink based on sulfated chitosan for bactericide carbendazim detection

Conductive polymers (CPs) are typically insoluble in solvents, and devising biocompatible hydrophilic CPs is challenging and imperative to expand the applications of CPs. Herein, sulfated chitosan (SCS) is used as a green dopant instead of toxic poly(styrene sulfonate) (PSS), and SCS:polypyrrole (SCS:PPy) conductive ink is prepared by in situ polymerization. Due to the complex structure between PPy and SCS polyanion, the synthesized SCS:PPy dispersion forms a well-connected electric pathway and confers superior conductivity, dispersion stability, good film-forming ability, and high electrical stability. As proof of our concept, electrochemical sensing utilizing an SCS:PPy-modified screen-printed carbon electrode (SPCE) was performed towards carbendazim (CBZ). The SCS:PPy on the SPCE surface displayed greater sensitivity to CBZ because the conductive complex structure eased the electrocatalytic action of SCS:PPy by dramatically increasing the current intensity of CBZ oxidation and notably ameliorating stability. The sensor unveils the lowest detection value of 1.02 nM with a linear range of 0.05 to 906 μM for sensing trace CBZ by utilizing the pulse voltammetry technique. Interestingly, this senor shows excellent selectivity towards CBZ due to the formation of substantial interactions between SCS:PPy and CBZ, as demonstrated by molecular simulation studies. Furthermore, this sensor can precisely monitor CBZ in actual fruit and river water samples with satisfactory results. This study sheds light on the design and synthesis of sustainable hydrophilic CPs in the fabrication of sensors.

Newly graphene/polypyrrole (rGO/PPy) modified carbon felt as bio-cathode in bio-electrochemical systems (BESs) achieving complete denitrification

Nitrate reduction in bio-electrochemical systems (BESs) has attracted wide attention due to its low sludge yields and cost-efficiency advantages. However, the high resistance of traditional electrodes is considered to limit the denitrification performance of BESs. Herein, a new graphene/polypyrrole (rGO/PPy) modified electrode is fabricated via one-step electrodeposition and used as cathode in BES for improving nitrate removal from wastewater. The formation and morphological results support the successful formation of rGO/PPy nanohybrids and confirm the part covalent bonding of Py into GO honeycomb lattices to form a three-dimensional cross-linked spatial structure. The electrochemical tests indicate that the rGO/PPy electrode outperforms the unmodified electrode due to the 3.9-fold increase in electrochemical active surface area and 6.9-fold decrease in the charge transfer resistance (Rct). Batch denitrification activity tests demonstrate that the BES equipped with modified rGO/PPy biocathode could not only achieve the full denitrification efficiency of 100% with energy recovery (15.9 × 10-2 ± 0.14 A/m2), but also favor microbial attach and growth with improved biocompatible surface. This work provides a feasible electrochemical route to fabricate and design a high-performance bioelectrode to enhance denitrification in BESs.

Stimuli-responsive thin film composites of conducting polymers and cellulose nanocrystals for tissue engineering

Thin composite films comprising two primary representatives of conducting polymers, poly(3, 4-ethylenedioxythiophene) (PEDOT) and polypyrrole (PPy), with eco-friendly cellulose nanocrystals (CNC) were prepared through electrochemical polymerization. The combination of CNC and PEDOT (or PPy) results in the formation of films with highly different surface topography and thickness. Intriguingly, different surface conductivity of PEDOT and PPy was revealed by atomic force microscopy albeit that the electrochemical properties were rather similar. The biological properties of the composites in contact with prospective human induced pluripotent stem cells (hiPSC) and cardiomyocytes derived from hiPSC demonstrated good cytocompatibility of both composites and their potential in engineering of electro-sensitive tissues. The as-prepared conducting, eco-friendly and cytocompatible composites are thus promising candidates for biomedical applications where stimuli-responsivity is a crucial cell-instructive property.

Fabrication of hollow core-shell NiCo2O4@polypyrrole nanofibers/reduced graphene oxide ternary composites with excellent microwave absorption performances

In contemporary times, electromagnetic radiation poses a significant threat to both human health and the normal functioning of electronic devices. Developing composites as adsorption materials possess exceptional electromagnetic wave absorption performances can efficient address this critical issue. Herein, hollow core-shell NiCo2O4@polypyrrole nanofibers/reduced graphene oxide (NiCo-HFPR) composites are fabricated by the combination of electrostatic spinning, air calcination, in-situ polymerization, freeze-drying and hydrazine vapor reduction. As anticipated, NiCo-HFPR-0.2 exhibits noteworthy properties, with the minimum reflection loss (RLmin) of -61.20 dB at 14.26 GHz and 1.56 mm, as well as the effective absorption bandwidth (EAB) of 4.90 GHz at 1.57 mm. Additionally, the simulation procedure is employed to determine the radar cross-section (RCS) attenuation. In comparison to a singular perfect electrically conductive (PEC) layer, the PEC layer coated with NiCo-HFPR-0.2 consistently yields an RCS value below -10 dB m2 within the range of -60° < θ < 60°. The RCS attenuation value of the NiCo-HFPR-0.2 coating achieves an outstanding 31.0 dB m2 at θ = 0°, strongly affirming the ability to effectively attenuate electromagnetic wave in real-world applications. The employed experimental methodology, the meticulously crafted composite, and the simulation outcomes presented in this study bear great promise for the progressive advancement of both theoretical investigations and practical applications within the domain of electromagnetic wave absorption.

Conductive interpenetrating network organohydrogels of gellan gum/polypyrrole with weather-tolerance, piezoresistive sensing and shape-memory capability

To develop ecofriendly multifunctional gel materials for sustainable flexible electronic devices, composite organohydrogels of gellan gum (GG) and polypyrrole (PPy) with an interpenetrating network structure (IPN-GG/PPy organohydrogels) were developed first time, through fabrication of GG organohydrogels followed by in-situ oxidation polymerization of pyrrole inside. Combination of water with glycerol can not only impart environment-stability to GG hydrogels but promote the mechanics remarkably, with the compressive strength amplified by 1250 % from 0.02 to 0.27 MPa. Incorporation of PPy confers electrical conductivity to the GG organohydrogel as well as promoting the mechanical performance further. The maximum conductivity of the IPN-GG/PPy organohydrogels reached 1.2 mS/cm at 25 °C, and retained at 0.6 mS/cm under -20 °C and 0.56 mS/cm after 7 days' exposure in 25 °C and 60 % RH. The compression strength of that with the maximum conductivity increases by 170 % from 0.27 to 0.73 MPa. The excellent conductivity and mechanical properties endow the IPN-GG/PPy organohydrogels good piezoresistive strain/pressure sensing behavior. Moreover, the thermo-reversible GG network bestows them shape-memory capability. The multifunctionality and intrinsic eco-friendliness is favorable for sustainable application in fields such as flexible electronics, soft robotics and artificial intelligence, competent in motion recognition, physiological signal monitoring, intelligent actuation.

Synthesis and evaluation of cellulose/polypyrrole composites as polymer electrolytes for lithium-ion battery application

Natural polymers as battery components have a number of advantages, including availability, biodegradability, unleakage, stable form, superior process, electrochemical stability, and low cost. In other sides, conductive polymers can improve the electrochemical properties of the battery, such as charge/discharge rates, cycling stability, and overall energy storage capacity. Therefore, the combination of these two materials can provide acceptable features. In this study, polymer electrolytes based on cellulose have been synthesized by solution casting method to prepare a thin polymer film. Then, polypyrrole (PPy) was blended with cellulose in different weight ratios. To prevent electrical conductivity of blends, PPy was used <10 wt%. The electrochemical properties of prepared electrolytes have been investigated by different methods. The results showed that ionic conductivity was increased by addition of PPy to cellulose due to the creation of pores and also due to the high dielectric constant of conductive polymers. All synthesized electrolytes had suitable ionic conductivity (in the range of 10-3 S cm-1), significant charge capacity, stable cyclic performance, excellent electrochemical stability (above 4.8 V), and high cation transfer number (between 0.38 and 0.66 for pure cellulose and the sample containing 10 wt% PPy).

Chitosan/dialdehyde cellulose hydrogels with covalently anchored polypyrrole: Novel conductive, antibacterial, antioxidant, immunomodulatory, and anti-inflammatory materials

In this work, conductive composite hydrogels with covalently attached polypyrrole (PPy) nanoparticles are prepared. Hydrogels are based on partially re-acetylated chitosan soluble at physiological pH without any artificial structural modifications or need for an acidic environment, which simplifies synthesis and purification. Low-toxic and sustainable dialdehyde cellulose (DAC) was used for crosslinking chitosan and covalent anchoring of PPy colloidal particles. The condensation reaction between DAC and PPy is reported for the first time and improves not only the anchoring of PPy particles but also control over the properties of the final composite. The soluble chitosan and PPy particles are shown to act in synergy, which improves the biological properties of the materials. Prepared composite hydrogels are non-cytotoxic, non-irritating, antibacterial, can capture reactive oxygen species often related to excessive inflammation, have conductivity similar to human tissues, enhance in vitro cell growth (migration assay), and have immunomodulatory effects related to the stimulation of neutrophils and macrophages. The covalent attachment of PPy also strengthens the hydrogel network. The aldol condensation as a method for PPy covalent anchoring thus presents an interesting possibility for the development of advanced biomaterials in the future.

Preparation of a novel polypyrrole/dolomite composite adsorbent for efficient removal of Cr(VI) from aqueous solution

A novel adsorbent, deposited PPy on the DMI (PPy/DMI) composite, was successfully synthesized for Cr(VI) removal from aqueous solution. PPy/DMI composite was characterized by BET, SEM, TEM, XRD, and XPS. The SEM and TEM analyses revealed that DMI can greatly reduce the aggregation of PPy and significantly enhance its adsorption performance. The Cr(VI) removal was highly pH dependent. The high selectivity of PPy/DMI composite for Cr(VI) removal was found even in the presence of co-existing ions. The adsorption kinetic process followed the pseudo-second-order equation, demonstrating that the Cr(VI) adsorption behavior onto PPy/DMI is chemisorption. Furthermore, the intra-particle diffusion model implied that the adsorption was controlled by both liquid membrane diffusion and internal diffusion. The adsorption isotherm data fitted well with the Langmuir model with the maximum adsorption capacity (406.50 mg/g at 323 K) which was considerably higher than that of other PPy-based adsorbents. The Cr(VI) adsorption onto PPy/DMI composite was endothermic. The main mechanisms of Cr(VI) removal are involved in adsorption through electrostatic attractions, ion exchange, and in situ reduction. The results suggested that PPy/DMI composite could be a promising candidate for efficient Cr(VI) removal from aqueous solution.

Polypyrrole-wool composite with electrical heating properties fabricated via layer-by-layer method

This study presents the development of conductive polymer-textile composites with outstanding electric heating properties achieved through the in-situ polymerization of polypyrrole on wool-felt fabrics, renowned for their superior thermal insulation. Employing successive layer-by-layer (LBL) cycles facilitated precise control over the uniform deposition of polypyrrole with the fabrics. The investigation focused on the interaction between wool fiber and polypyrrole, evaluating appearance, add-on, and electrical heating performance with varying LBL cycles. The polymerization process resulted in the formation of spherical polypyrrole particles on the wool-felt, with deposition increasing alongside LBL cycle numbers. Mechanical properties, including tensile strength and bending rigidity, exhibited enhancement with polypyrrole deposition, while strain reduction was noted, with minimal influence from LBL cycles. Electrical properties, particularly surface resistance, displayed a rapid decrease up to the second LBL cycle. Concerning electrical heating performance, the application of a 12 V voltage resulted in a linear increase in surface temperature with increasing LBL cycles, peaking at 15.5 ℃. Notably, this sustained electrical heating effect persisted even after voltage removal, attributed to the low thermal conductivity of wool fiber. Moreover, the polypyrrole conductive layer maintained exceptional conductivity following repeated abrasion and washing, credited to improved uniformity through LBL cycles. The synergy of wool's insulating properties and polypyrrole's conductivity, as confirmed in this study, presents the potential for a highly efficient heating fabric. These developed materials exhibited improved heating performance, energy conservation, and minimal change in mechanical properties, making them suitable for applications such as electrical heating smart clothing.

A novel polycaprolactone/polypyrrole/β-cyclodextrin electrochemical flexible sensor for dinotefuran pesticide detection

The monitoring and the rapid quantification of pesticides and their residues are becoming increasingly important in the field of food safety. Herein, the polycaprolactone/polypyrrole/β-cyclodextrin (PCL/PPy/β-CD) flexible sensor was developed for the electrochemical determination of new neonicotinoid insecticide Dinotefuran (DNF). The morphology, structure, and hydrophilicity of PCL/PPy/β-CD sensor probes were characterized by SEM, FTIR spectroscopy and static contact angle test. Under optimum conditions, the fabricated PCL/PPy/β-CD sensor exhibited excellent electrochemical sensing performance for DNF with a low detection limit of 0.05 μM in the linear concentration range from 0.2 μM to 50 μM and high sensitivity 14.07 μA·μM-1·cm-2, which attributed to the two-stage porous structure, good electron transfer rate and the adsorption effect. The PCL/PPy/β-CD sensor also showed reproducibility (RSD = 4.76%), stability, and high selectivity towards DNF. In addition, a real samples investigation in rice with recoveries of 96.67 % ∼ 103.65 % implied the good application potential of PCL/PPy/β-CD in DNF monitoring.

A flexible capacity-metric creatinine sensor based on polygon-shape polyvinylpyrrolidone/CuO and Fe2O3 NRDs electrodeposited on three-dimensional TiO2-V2O5-Polypyrrole nanocomposite

The innovations of the present work include these items; (i) Design and preparation of three-dimensional flexible conductive polymeric nanocomposites (3D-FCPNCs) containing polypyrrole (PPy), V2O5 and TiO2 and modification of their surface with polygon-shape polyvinylpyrrolidone/CuO nanorods (PVP/CuO NRDs) and Fe2O3 NRDs using an hierarchical process based on isoelectric point (IEP), (ii) Application of the prepared surfaces as the flexible enzymeless creatinine sensors using four calibration curves (impedimetric, real capacitance (C'), imaginary capacitance (C″) and double layer capacitance (Cdl)) obtained from electrochemical impedance spectroscopy (EIS) technique. The best results have been obtained using PVP/CuO NRDs-Fe2O3 NRDs/TiO2-V2O5-PPy 3D-FCPNC hierarchical electrode with a wide range of the linear concentration range (10 nmol L-1 -1.3 mmol L-1). Although, determination of creatinine through extraction of parameters such as charge transfer resistance (Rct) and Cdl from measuring impedance at a wide range of frequencies provides useful information about the characteristics of the electrolyte/electrode interface, but measuring real and imaginary capacitances at a specific frequency instead of a wide frequency range can decrease the response time to lower than 1 min. Finally, the prepared hierarchical enzymeless sensors have been successfully used to estimate creatinine concentration in blood serum.

Polypyrrole-based structures for activation of cellular functions under electrical stimulation

Polypyrrole (Ppy) is an electroconductive polymer used in various applications, including in vitro experiments with cell cultures under electrical stimulation (ES). Ppy can be applied in various forms and most importantly, it is biocompatible with cells. Ppy specifically directs ES to cells, which makes Ppy a potential polymer for the development of novel technologies for targeted tissue regeneration. The high potential of ES in combination with different Ppy-based systems, such as hydrogels, scaffolds, or Ppy-layers is advantageous to stimulate cellular differentiation towards neurogenic, cardiac, muscle, and osteogenic lineages. Different in-house devices and the principles of ES application used to stimulate cellular functions are reviewed and summarized. The focus of this review is to observe the most relevant studies and their in-house techniques regarding the application of Ppy-based materials for the use of bone, neural, cardiac, and muscle tissue regeneration under ES. Different types of Ppy materials, such as Ppy particles, layers/films, membranes, and 3D-shaped synthetic and natural scaffolds, as well as combining Ppy with different active molecules are reviewed.

Conductive GelMA/alginate/polypyrrole/graphene hydrogel as a potential scaffold for cardiac tissue engineering; Physiochemical, mechanical, and biological evaluations

Cardiac failure can be a life-threatening condition that, if left untreated, can have significant consequences. Functional hydrogel has emerged as a promising platform for cardiac tissue engineering. In the proposed study, gelatin methacrylate (GelMA) and alginate, as a primary matrix to maintain cell viability and proliferation, and polypyrrole and carboxyl-graphene, to improve mechanical and electrical properties, are thoroughly evaluated. Initially, a polymer blend of GelMA/Alginate (1:1) was prepared, and then the addition of 2-5 wt% of polypyrrole was evaluated. Next, the effect of incorporating graphene-carboxyl nanosheets (1, 2, and 3 wt%) within the optimized scaffold with 2 wt% polypyrrole was thoroughly studied. The electrical conductivity of the hydrogels was significantly enhanced from 0.0615 ± 0.007 S/cm in GelMA/alginate to 0.124 ± 0.04 S/cm with the addition of 5 wt% polypyrrole. Also, 3 wt% carboxyl graphene improved the electrical conductivity to 0.27 ± 0.09 S/cm. The compressive strength of carboxyl-graphene-containing hydrogel was in the range of 175 to 520 kPa, and tensile strength was 61 and 133 kPa. The simplicity and low-cost fabrication, tunable mechanical properties, optimal electrical conductivity, blood compatibility, and non-cytotoxicity of GelMA/alginate/polypyrrole/graphene biocomposite hydrogel is a promising construct for cardiac tissue engineering.

Constructing ion-transport blockchain by polypyrrole to link CoTi-ZIF-9 derived carbon materials for high-performance seawater desalination

The instability and poor electronic conductivity of carbon materials derived from bimetallic zeolite imidazolate frameworks (ZIFs) pose significant challenges for utilizing these carbon materials as direct electrodes for achieving rapid electron transfer and high-performance capacitive deionization (CDI). However, modifying ZIFs through conductive polymers is a wise tool to enhance the target characteristics of ZIFs. Herein, a strategy is proposed to use polypyrrole (PPy) to interlink the carbon units derived from CoTi-ZIF-9 to construct a blockchain network system with high capacity and fast electrochemical kinetics for high performance CDI. In this system, PPy serves as a branched link connecting each carbon unit, so that the ions in the electrolyte can achieve low barrier and fast transmission in the three-dimensional network structure between the unit structures. As expected, with the improved charge transfer efficiency between electrode materials and electrolyte, the CDI cell exhibits excellent desalination capacity (77.3 mg g-1). In addition, density functional theory calculations also indicate that the introduction of PPy results in a higher electron density near the fermi surface of carbon material, which is conducive to electron transport and reaction kinetics. This work may provide important concepts for the design of CDI electrodes with high-conductivity and high-performance.

Porous polypyrrole with a vesicle-like structure for efficient removal of per- and polyfluoroalkyl substances from water: Crucial role of porosity and morphology

Herein, a vesicle-like and porous polypyrrole (pPPy) was fabricated by in suit self-template method to efficiently capture per- and polyfluoroalkyl substances (PFASs) and the important role of porosity and morphology in PFAS removal was explored. Compared to solid PPy (sPPy), the porosity and vesicle-like morphology of pPPy endowed it with excellent properties such as large specific surface area (108.9 m2/g vs. 22.3 m2/g), suitable pore sizes (17.4 nm), dispersity, and high hydrophilicity, which facilitated mass transfer and enhanced PFAS sorption performance. The estimated sorption capacities of pPPy for perfluorooctanoic acid (PFOA) and perfluorooctanesulfonate (PFOS) were 509 mg/g and 532 mg/g, respectively, which were ∼2 times higher than sPPy. Furthermore, pPPy demonstrated PFAS removal of ≥ 90% across a wide pH range (3-9) and varying humic acid concentrations (0-50 mg/L). In actual water matrices, pPPy efficiently removed 12 short-chain (C-F number: 3-6) and long-chain PFASs (>90% removal for major PFASs), outperforming sPPy by ∼1.2-2.5 times. Notably, the enlarged porosity and regular morphology of pPPy significantly enhanced the removal of short-chain PFASs by ∼2 times. The spent pPPy could be regenerated and reused over 5 times. This research provides valuable insights for designing efficient PFAS sorbents by emphasizing control over porosity and morphology.

Flexible, ultrathin and integrated nanopaper supercapacitor based on cationic bacterial cellulose

Cellulose composite nanopaper is extensively employed in flexible energy storage systems owing to their light weight, good flexibility and high specific surface area. Nevertheless, achieving flexible and ultrathin nanopaper supercapacitors with excellent electrochemical performance remains a challenge. Herein, surface cationization of bacterial cellulose (BC) nanofibers was conducted using 2,3-epoxypropyltrimethylammonium chloride (EPTMAC). Anion-doped polypyrrole (PPy) was incorporated onto the surface of the cationic bacterial cellulose (BCE) nanofibers by an interfacial electrostatic self-assembly process. The obtained PPy@BCE electrode exhibited excellent electrochemical performance, including an areal capacitance of 3988 mF cm-2 at 1.0 mA cm-2 and a capacitance retention of 97 % after 10,000 cycles. A laminated paper-forming strategy was adopted to design and fabricate all-in-one integrated flexible supercapacitors (IFSCs) using PPy@BCE nanopaper as electrodes and BC nanopaper as a separator. The IFSCs showed superior areal capacitance (3669 mF cm-2 at 1 mA cm-2), high energy density (193.7 μWh cm-2 at a power density of 827.3 μW cm-2), and outstanding mechanical flexibility (with no significant capacitance attenuation after repeatedly bending for 1000 times). The present strategy paves a way for the large-scale production of paper-based energy storage devices.

Simultaneous Cr(VI) reduction and Cr(III) sequestration in a wide pH range by using magnetic chitosan-based biopolymer

The simultaneous reduction of Cr(VI) and sequestration of the resulting Cr(III) in one process is highly desirable as a cost-effective and environmental-friendly approach for the decontamination of Cr(VI)-polluted wastewater. However, most of the existing adsorptive materials are only effective in low pH environments (pH = 1-3), severely restricting the adsorption efficiency and cost effectiveness. Herein, we proposed a chitosan-based magnetic porous microsphere (PPy@PMCS) for simultaneous Cr(VI) reduction and Cr(III) sequestration in a wide pH range. Benefiting from its abundant interaction sites, Cr(VI) was effectively adsorbed on the surface and then immediately reduced to Cr(III) with much lower toxicity. Most importantly, the resulting Cr(III) was in-situ sequestrated by the complexation of chitosan matrix. As a result, PPy@PMCS exhibited a maximum Cr(VI) adsorption capacity of 330.42 mg/g at pH 2.0 and an adsorption capacity of 167.82 mg/g even at near neutral pH (6.0), which is superior to most reported adsorbents. Furthermore, the exhausted PPy@PMCS can be rapidly separated from solutions under an external magnetic field and facilely regenerated. The proposed novel biopolymer-based material shows great application potentials in wastewater treatment.

Sponge-like biodegradable polypyrrole-modified biopolymers for selective adsorption of basic red 46 and crystal violet dyes from single and binary component systems

Recently, several researchers have been trying to reduce the ecological effects of water pollution by considering the use of biodegradable materials that prevent the generation of secondary pollution in our environment and enable water reuse. Here, new biodegradable hydrogels based on alginate (Alg), gelatin (Gel) and polypyrrole (PPy) were successfully implemented to remove two known highly toxic cationic dyes from wastewater. The design process was performed in two steps: in-situ polymerization of polypyrrole within the Alg/Gel mixture, followed by hydrogel formation. Biocomposites showed promising efficacy for the removal of both basic red 46 (BR46) and crystal violet (CV) dyes from real and demineralized water samples. However, Alg-Gel-PPy hydrogel showed better selectivity for BR46 than for CV as compared to the pristine Alg-Gel hydrogel. Adsorption of both pollutants on biocomposite hydrogel beads followed the Langmuir isotherm and pseudo-second order kinetic models. Besides, the highest adsorption capacities (125 mg g-1 for BR46 and 88.5 mg g-1 for CV) were obtained for the Alg-Gel-PPy hydrogel, compared with those determined for PPy-free hydrogel (103.09 mg g-1 for BR46 and 86.96 mg g-1 for CV) and remained at a satisfactory level for five adsorption-desorption cycles. Finally, the obtained hydrogels showed excellent biodegradability by natural soil microorganisms, with 91 % decomposition.

Boosting the Cell Performance of the SiO/Cu and SiO/PPy Anodes via In-Situ Reduction/Oxidation Coating Strategies

Silicon monoxide (SiO) has attracted great attention due to its high theoretical specific capacity as an alternative material for conventional graphite anode, but its poor electrical conductivity and irreversible side reactions at the SiO/electrolyte interface seriously reduce its cycling stability. Here, to overcome the drawbacks, the dicharged SiO anode coated with Cu coating layer is elaborately designed by in-situ reduction method. Compared with the pristine SiO anode of lithium-ion battery (293 mAh g-1 at 0.5 A g-1 after 200 cycles), the obtained SiO/Cu composite presents superior cycling stability (1206 mAh g-1 at 0.5 A g-1 after 200 cycles). The tight combination of Cu particles and SiO significantly improves the conductivity of the composite, effectively inhibits the side-reaction between the active material and electrolyte. In addition, polypyrrole-coated SiO composites are further prepared by in-situ oxidation method, which delivers a high reversible specific capacity of 1311 mAh g-1 at 0.5 A g-1 after 200 cycles. The in-situ coating strategies in this work provide a new pathway for the development and practical application of high-performance silicon-based anode.

Fabrication of cobalt-zinc bimetallic oxides@polypyrrole composites for high-performance electromagnetic wave absorption

Composite materials that combine magnetic and dielectric losses offer a potential solution to enhance impedance match and significantly improve microwave absorption. In this study, Co3O4/ZnCo2O4 and ZnCo2O4/ZnO with varying metal oxide compositions are successfully synthesized, which are achieved by modifying the ratios of Co2+ and Zn2+ ions in the CoZn bimetallic metal-organic framework (MOF) precursor, followed by a high-temperature oxidative calcination process. Subsequently, a layer of polypyrrole (PPy) is coated onto the composite surfaces, resulting in the formation of core-shell structures known as Co3O4/ZnCo2O4@PPy (CZCP) and ZnCo2O4/ZnO@PPy (ZCZP) composites. The proposed method allows for rapid adjustments to the metal oxide composition within the inner shell, enabling the creation of composites with varying degrees of magnetic losses. The inclusion of PPy in the outer shell serves to enhance the bonding strength of the entire composite structure while contributing to conductive and dielectric losses. In specific experimental conditions, when the loading is set at 50 wt%, the CZCP composite exhibits an effective absorption bandwidth (EAB) of 5.58 GHz (12.42 GHz-18 GHz) at a thickness of 1.53 mm. Meanwhile, the ZCZP composite demonstrates an impressive minimum reflection loss (RLmin) of -71.2 dB at 13.04 GHz, with a thickness of 1.84 mm. This study offers a synthesis strategy for designing absorbent composites that possess light weight and excellent absorptive properties, thereby contributing to the advancement of electromagnetic wave absorbing materials.

Robust double-network polyvinyl alcohol-polypyrrole hydrogels as high-performance electrodes for flexible supercapacitors

The growing demands of flexible and wearable electronic devices boost the rapid development of flexible supercapacitors (FSCs). Conductive hydrogels are considered to be one type of promising electrode materials for FSCs due to their good processability and electrochemical properties. However, the poor mechanical properties of conductive hydrogels hinder their practical applications. Building robust cross-linked network structures is a feasible way to enhance their mechanical properties. Herein, the double-network polyvinyl alcohol (PVA)-polypyrrole (PPy) conductive hydrogels are synthesized by the freeze-thaw and in-situ polymerization method. The double-network structure not only enhances mechanical properties of the hydrogels, but also promotes their electrolyte ion transport. The maximum elongation at break of the optimized PVA-PPy hydrogels can reach 156.4%, and the specific capacitance is 1718.7 mF cm-2 at 0.5 mA cm-2. Furthermore, the energy densities of the symmetrical PVA-PPy FSCs are 46.7 and 13.3 μWh cm-2 at power densities of 200.0 and 2000.0 μW cm-2. Such excellent electrochemical performances and mechanical properties make the synthesized PVA-PPy hydrogels a promising candidate for FSCs.

Removal of an agricultural herbicide (2,4-Dichlorophenoxyacetic acid) using magnetic nanocomposite: A combined experimental and modeling studies

This study focused on modeling the removal of one of the widely used agricultural herbicides known as 2,4-Dichlorophenoxyacetic acid (2,4-D) using polypyrrole-coated Fe2O3 nanoparticles (Fe2O3@PPy). The Fe2O3@PPy nanocomposite was synthesized by surface-coating the Tabebuia aurea leaf extract synthesized Fe2O3 nanoparticles with polypyrrole. After characterization, the adsorptive potential of the nanocomposite for removing 2,4-D from aqueous solution was examined. Central composite design (CCD) was employed for optimizing the adsorption, revealing an adsorption efficiency of 90.65% at a 2,4-D concentration of 12 ppm, a dosage of 3.8 g/L, an agitation speed of 150 rpm, and 196 min. Adsorption dataset fitted satisfactorily to Langmuir isotherm (R2: 0.984 & χ2: 0.054) and pseudo-second-order kinetics (R2: 0.929 & χ2: 0.013) whereas the exothermic and spontaneous nature were confirmed via the thermodynamic study. The predictive models, including adaptive neuro-fuzzy inference system (ANFIS), artificial neural network (ANN), and response surface methodology (RSM), demonstrated good precision for the prediction of 2,4-D adsorption, with respective R2 of 0.9719, 0.9604, and 0.9528. Nevertheless, statistical analysis supported ANFIS as the better forecasting tool, while RSM was the least effective. The maximum adsorption capacity of 2,4-D onto the Fe2O3@PPy nanocomposite was 7.29 mg/g, significantly higher than a few reported values. Therefore, the Fe2O3@PPy nanocomposite could serve as a competent adsorbent to remove 2,4-D herbicide from aqueous streams.

A multifunctional surgical suture with electroactivity assisted by oligochitosan/gelatin-tannic acid for promoting skin wound healing and controlling scar proliferation

Surgical wound closure is accomplished most frequently with sutures, optimally proceeding rapidly and without complication. However, surgical sutures can trigger foreign body reactions and incite abnormal collagen deposition. Sustained inflammation can result in abnormal wound healing with hypertrophic scar formation. Therefore, evolution of suture material to inhibit inflammation and scar formation is of great clinical significance. In the present study, commercial 3-0 PPDO [poly(p-dioxanone)] suture was used as the base material and modified by adding two layers: a drug-loaded layer and an electroactive layer. The former layer was curcumin (Cur) encapsulated by PLGA [poly (lactic-co-glycolic acid)] and the latter layer was composed of oligochitosan-gelatin/tannic acid/polypyrrole (OCS-GE/TA/PPy). The multifunctional sutures, named S@LC@CGTP, had desirable sustained-drug release properties in vitro where Cur could be released for 8 days due to the action of PLGA. The three-dimensional network structure of OCS-GE/TA ensured S@LC@CGTP against surface cracking and maintained electrical. Furthermore, using an in vivo experiment, S@LC@CGTP could attenuate inflammation and promote scar-free wound healing according to suppression of infiltrating inflammatory cells, down-regulation of TGF-β1 and collagen type I expression, and improved collagen arrangement. Cumulatively, we indicated that S@LC@CGTP suture material has great potential to facilitate optimal, nearly scarless healing of surgical incisions.

Proton Shuttling by Polyaniline of High Brønsted Basicity for Improved Electrocatalytic Ethylene Production from CO2

Hybrid organic/inorganic composites with the organic phase tailored to modulate local chemical environment at the Cu surface arise as an enchanting category of catalysts for electrocatalytic CO2 reduction reaction (CO2 RR). A fundamental understanding on how the organics of different functionality, polarity, and hydrophobicity affect the reaction path is, however, still lacking to guide rational catalyst design. Herein, polypyrrole (PPy) and polyaniline (PANI) manifesting different Brønsted basicity are compared for their regulatory roles on the CO2 RR pathways regarding *CO coverage, proton source and interfacial polarity. Concerted efforts from in situ IR, Raman and operando modelling unveil that at the PPy/Cu interface with limited *CO coverage, hydridic *H produced by the Volmer step favors the carbon hydrogenation of *CO to form *CHO through a Tafel process; Whereas at the PANI/Cu interface with concentrated CO2 and high *CO coverage, protonic H+ shuttled through the benzenoid -NH- protonates the oxygen of *CO, yielding *COH for asymmetric coupling with nearby *CO to form *OCCOH under favored energetics. As a result of the tailored chemical environment, the restructured PANI/Cu composite demonstrates a high partial current density of 0.41 A cm-2 at a maximal Faraday efficiency of 67.5 % for ethylene production, ranking among states of the art.

Flexible genosensors based on polypyrrole and graphene quantum dots for PML/RARα fusion gene detection: A study of acute promyelocytic leukemia in children

Acute promyelocytic leukemia (APL) in children is associated with a favorable initial prognosis. However, minimal residual disease (MRD) follow-up remains poorly defined, and relapse cases are concerning due to their recurrent nature. Thus, we report two electrochemical flexible genosensors based on polypyrrole (PPy) and graphene quantum dots (GQDs) for label-free PML-RARα oncogene detection. Atomic force microscopy (AFM), scanning electron microscope (SEM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) were used to characterize the technological biosensor development. M7 and APLB oligonucleotide sequences were used as bioreceptors to detect oncogenic segments on chromosomes 15 and 17, respectively. AFM characterization revealed heterogeneous topographical surfaces with maximum height peaks for sensor layers when tested with positive patient samples. APLB/Genosensor exhibited a percentage change in anode peak current (ΔI) of 423 %. M7/Genosensor exhibited a ΔI of 61.44 % for more concentrated cDNA samples. The described behavior is associated with the biospecific recognition of the proposed biosensors. Limits of detection (LOD) of 0.214 pM and 0.677 pM were obtained for APLB/Genosensor and M7/Genosensor, respectively. The limits of quantification (LOQ) of 0.648 pM and 2.05 pM were estimated for APLB/Genosensor and M7/Genosensor, respectively. The genosensors showed reproducibility with a relative standard deviation of 7.12 % for APLB and 1.18 % for M7 and high repeatability (9.89 % for APLB and 1.51 % for M7). In addition, genetic tools could identify the PML-RARα oncogene in purified samples, plasmids, and clinical specimens from pediatric patients diagnosed with APL with high bioanalytical performance. Therefore, biosensors represent a valuable alternative for the clinical diagnosis of APL and monitoring of MRD with an impact on public health.

Electroconductive bioplatform based on dextrin for the immobilization of hemoglobin: Application for electrochemical monitoring of H2O2

A novel biodegradable dextrin-based nanocomposite, involving polypyrrole (PPy) and hydrophilic dextrin (Dex) (PPy@Dex) was prepared using in-situ radical chemical polymerization technique. The obtained PPy@Dex bionanocomposite was fully characterized by FT-IR, XRD, FESEM, and DSC methods. The exceptional properties such as biocompatibility, high surface area, the proper functional group on the surface, and outstanding electrical conductivity of synthesized bionanocomposite made it a superior candidate over biomolecules immobilization. Electrochemical observations revealed that the PPy@Dex-coated glassy carbon electrode (GCE) demonstrated improved performance, making it a suitable substrate for immobilizing hemoglobin (Hb) and constructing an efficient biosensor. The resulting biosensor, named Hb-PPy@Dex/GCE, exhibited high activity in the reduction of hydrogen peroxide (H2O2). Amperometric examinations demonstrated an extensive linear range from 2 to 350 μM for Hb-PPy@Dex/GCE. The detection limit of the proposed approach was calculated to be 0.54 μM, following the S/N = 3 protocol.

In situ self-sacrificial synthesis of polypyrrole/biochar composites for efficiently removing short- and long-chain perfluoroalkyl acid from contaminated water

Efficient removal of perfluoroalkyl acids (PFAAs), especially short-chain ones, from contaminated water is of great challenge and is urgently called for so as to safeguard the ecosystem and human health. Herein, polypyrrole (PPy) functionalized biochar (BC) composites were innovatively synthesized by an in situ self-sacrificial approach to allow efficient capture of PFAAs with different chain lengths. Compared with conventional PPy-based composites synthesized by direct polymerization using FeCl3 as an oxidizing agent, PPy/BC composites were fabricated utilizing freshly generated Fe3+ as an oxidizing agent from self-sacrificial Fe3O4 for pyrrole monomers in situ polymerizing on BC. As a result, with the support of BC and gradual release of Fe3+, PPy overcame its tendency to aggregate and became uniformly dispersed on BC, and meanwhile, PPy could well tailor the surface chemistry of BC to endow its positively charged surface. Consequently, the composites exhibited strong sorption capacities of 3.89 and 1.53 mmol/g for short-chain perfluorobutanoic acid (PFBA) and perfluorobutane sulfonic acid (PFBS), 2.55 and 1.22 mmol/g for long-chain perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), respectively, which were superior to those of pristine BC, commercial activated carbon, and anion exchange resins reported. Additionally, they could effectively remove 17 different classes of per- and polyfluoroalkyl substances (PFAS) (removal >95%) from actual PFAS-contaminated water, and the spent sorbent could be well regenerated and reused at least 5 times. An integrated analysis indicated that such an outstanding PFAA sorption performance on PPy/BC composites could be mainly attributed to surface adsorption enhanced by electrostatic attractions (anion exchange interaction) with the traditional hydrophobic interaction and pore filling of less contribution, particularly for short-chain analogues. These results are expected to inform the design of BC with greater ability to remove PFAS from water and the new sorbent could help water facilities comply with PFAS regulations.

Multifaceted synergistic facilitation mechanism of conductive polymers in promoting selenite bioreduction and biological detoxification

Here, polypyrrole (PPY) was first used to the bioreduction of toxic selenite, while the acceleration effect and mechanism were explored. Experiment results suggested that PPY could enhance the selenite bioreduction from 0.42 to 1.04 mg/(L·h). The tests of electrochemical analysis and cytochrome c (cyt-c) content confirmed that PPY promoted the intracellular/intracellular electron transfer of Shewanella oneidensis·MR-1 in selenite bioreduction process. The enhancement of metabolic activity by PPY contributed to biological detoxification, which was manifested in the increased extracellular polymeric substances (EPS), adenosine triphosphate (ATP), electron transfer system activity (ETSA), membrane permeability and enzyme activity. Transcriptome analysis of DEGs, KEGG pathway enrichment and GO functional classification verified that the environmental adaptability of Shewanella oneidensis·MR-1 was enhanced with the addition of PPY. The transmission electron microscopy (TEM) images indicated that PPY promoted the biosynthesis of selenium nanoparticles (SeNPs), which was beneficial to reduce cell damage. Combined with the above results, a multifaceted synergistic facilitation mechanism based on "conductive cross-linking network" was elaborated from electron transfer, microbial metabolism and environmental adaptability. This study shed light the effect of conductive polymers (CPs) on selenite bioreduction and provided new insights into the bioremediation of toxic pollutants.

In situ regulation of selectivity and permeability by electrically tuning pore size in trans-membrane ion process

Regulating ion transport behavior through pore size variation is greatly attractive for membrane to meet the need for precise separation, but fabricating nanofiltration (NF) membranes with tunable pore size remains a huge challenge. Herein, a NF membrane with electrically tunable pores was fabricated by intercalating polypyrrole into reduced graphene oxide interlayers. As the potential switches from reduction to oxidation, the membrane pore size shrinks by 11%, resulting in a 16.2% increase in salt rejection. The membrane pore size expands/contracts at redox potentials due to the polypyrrole volume swelling/shrinking caused by the insertion/desertion of cations, respectively. In terms of the inserted cation, Na+ and K+ induce larger pore-size stretching range for the membrane than Ca2+ due to greater binding energy and larger doping amount. Such an electrical response characteristic remained stable after multiple cycles and enabled application in ion selective separation; e.g., the Na+/Mg2+ separation factor in the reduced state is increased by 41% compared to that in the oxide state. This work provides electrically tunable nanochannels for high-precision separation applications such as valuable substance purification and resource recovery from wastewater.

Nitrogen-doped porous carbon nanomaterials synthesized using a magadiite template as efficient peroxidase mimics for colorimetric detection of ascorbic acid as an antioxidant

Nanomaterials with intrinsic enzyme-like activity have gained substantial scientific attention as viable substitutes to natural biological enzymes owing to their cheap price and great stability. Numerous artificial enzyme mimics have been employed effectively in sectors such as sensing, environmental processing, and cancer treatment. In this study, novel nitrogen-doped porous carbon nanomaterials (CPs) were produced by modifying polypyrrole with magadiite using chemical oxidative polymerization and calcination methods. The obtained nitrogen-doped porous carbon nanomaterials exhibited improved peroxidase-like activity, which catalyzed the oxidation of 3,3,5,5-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide (H2O2) to produce colorful compounds. Kinetic investigation revealed that the affinity for TMB of nitrogen-doped porous carbon peroxidase mimics was higher than that of genuine horseradish peroxidase (HRP). In addition, a sensitive assay with encouraging performance for the colorimetric detection of ascorbic acid (AA) was successfully fabricated employing nitrogen-doped porous carbon nanomaterials as peroxidase mimics. The results were satisfactory and demonstrated its potential application in antioxidant detection.

Electrochemical DNA Sensor Designed Using the Pencil Graphite Electrode to Detect Listeria monocytogenes

In the present work, a novel electrochemical DNA sensor was designed to detect L. monocytogenes. Two different gene fragments were selected for the sensor design. One is a 702 bp long fragment of the hlyA gene, encoding the synthesis of listeriolysin O toxin, which is unique only to pathogenic strains of L. monocytogenes and is essential for pathogenicity. The other is a 209 bp long fragment of the 16 S RNA gene found in all species of the Listeria genus. As the working electrode, the pencil graphite electrode was modified in various ways (activated or covered with polypyrrole), and six different combinations were constituted using three types of the modified working electrode and two different gene fragments. The developed system is based on differential pulse voltammetric transduction of guanine oxidation after hybridization between the selected gene fragment (38 µg/mL) and the selected fragment-specific inosine-modified probe (1.8 µmol/L) immobilized on a pencil graphite electrode surface. The comparison of all combinations demonstrates that the best results are obtained with the combination formed from a polypyrrole-coated pencil graphite electrode (prepared at 2 scans) and 702 bp fragment of the hlyA gene. The analysis time is less than 1 hour, and the necessary DNA concentrations for the analysis have been determined as 8.2 × 10-11 M DNA and 2.7 × 10-10 M DNA respectively, for the hlyA gene and 16 S RNA gene.

D-tartaric acid doping improves the performance of whole-cell bacteria imprinted polymer for sensing Vibrio parahaemolyticus

Whole-cell bacteria imprinted polymer-based sensors still face challenges in the form of the difficulty of removing the template entirely, low affinity, and poor sensitivity. To further improve their performance, it is pivotal to modulate the morphology and chemical properties of imprintied polymer by taking advantage of doping engineering. Here we introduced D-tartaric acid (D-TA) as a dopant and employed pyrrole as a functional monomer to construct D-TA/polypyrrole (PPy)-based bacteria imprinted polymer (DPBIP) sensor for Vibrio parahaemolyticus (VP) detection. It is demonstrated that D-TA doping can synergistically accelerate the removal of template bacteria from imprinted polymers (1.5 h), improve bacteria affinity of imprinted sites (the recognition time of 30 min), and enhance the sensitivity of DPBIP sensor (a detection limit of 19 CFU mL-1). The DPBIP sensor had a linear range of 102∼106 CFU mL-1 and exhibited high selectivity and good repeatability. Moreover, a recovery of 94.8%-105.3% was achieved in drinking water and oyster samples. Therefore, small functional molecules doping opens a new avenue to engineering BIP-based sensors with high performance, holding potential applications in securing food safety.

Implantable polypyrrole bioelectrodes inducing anti-inflammatory macrophage polarization for long-term in vivo signal recording

Bioelectrodes are critical components of implantable electronic devices that enable precise electrical signal transmission in close contact with living tissues. However, their in vivo performance is often compromised by inflammatory tissue reactions mainly induced by macrophages. Hence, we aimed to develop implantable bioelectrodes with high performance and high biocompatibility by actively modulating the inflammatory response of macrophages. Consequently, we fabricated heparin-doped polypyrrole electrodes (PPy/Hep) and immobilized anti-inflammatory cytokines (interleukin-4 [IL-4]) via non-covalent interactions. IL-4 immobilization did not alter the electrochemical performance of the original PPy/Hep electrodes. In vitro primary macrophage culture revealed that IL-4-immobilized PPy/Hep electrodes induced anti-inflammatory polarization of macrophages, similar to the soluble IL-4 control. In vivo subcutaneous implantation indicated that IL-4 immobilization on PPy/Hep promoted the anti-inflammatory polarization of host macrophages and significantly mitigated scarring around the implanted electrodes. In addition, high-sensitivity electrocardiogram signals were recorded from the implanted IL-4-immobilized PPy/Hep electrodes and compared to bare gold and PPy/Hep electrodes, which were maintained for up to 15 days post-implantation. This simple and effective surface modification strategy for developing immune-compatible bioelectrodes will facilitate the development of various electronic medical devices that require high sensitivities and long-term stabilities. STATEMENT OF SIGNIFICANCE: To fabricate highly immunocompatible conductive polymer-based implantable electrodes with high performance and stability in vivo, we introduced the anti-inflammatory activity to PPy/Hep electrodes by immobilizing IL-4 via non-covalent surface modification. IL-4-immobilized PPy/Hep could significantly mitigate inflammatory responses and scarring around implants by skewing macrophages to an anti-inflammatory phenotype. The IL-4-immobilized PPy/Hep electrodes could successfully record in vivo electrocardiogram signals for up to 15 days with no substantial sensitivity loss, retaining their superior sensitivity compared to bare gold and pristine PPy/Hep electrodes. Our simple and effective surface modification strategy for developing immune-compatible bioelectrodes will facilitate the development of various electronic medical devices that require high sensitivities and long-term stabilities, such as neural electrode arrays, biosensors, and cochlear electrodes.

Efficient photocatalytic degradation of ciprofloxacin by graphite felt-supported MnS/Polypyrrole composite: Dominant reactive species and reaction mechanisms

The accumulation of antibiotics in aquatic environments poses a serious threat to human health. Photocatalytic degradation is a promising method for removing antibiotics from water, but its practical implementation requires improvements in photocatalyst activity and recovery. Here, a novel graphite felt-supported MnS/Polypyrrole composite (MnS/PPy/GF) was constructed to achieve effective adsorption of antibiotics, stable loading of photocatalyst, and rapid separation of spatial charge. Systematic characterization of composition, structure and photoelectric properties indicated the efficient light absorption, charge separation and migration of the MnS/PPy/GF, which achieved 86.2% removal of antibiotic ciprofloxacin (CFX), higher than that of MnS/GF (73.7%) and PPy/GF (34.8%). The charge transfer-generated 1O2, energy transfer-generated 1O2, and photogenerated h+ were identified as the dominant reactive species, which mainly attacked the piperazine ring in the photodegradation of CFX by MnS/PPy/GF. The •OH was confirmed to participate in the defluorination of CFX via hydroxylation substitution. The MnS/PPy/GF-based photocatalytic process could ultimately achieve the mineralization of CFX. The facile recyclability, robust stability, and excellent adaptability to actual aquatic environments further confirmed MnS/PPy/GF is a promising eco-friendly photocatalyst for antibiotic pollution control.

Polypyrrole/carbon dot nanocomposite as an electrochemical biosensor for liquid biopsy analysis of tryptophan in the human serum of normal and breast cancer women

Liquid biopsy analysis represents a suitable alternative analysis procedure in several cases where no tumor tissue is available or in poor patient conditions. Amino acids can play a crucial role in aiding cancer diagnosis. Monitoring of tryptophan (Trp) catabolism can aid in tracking cancer progression. Therefore, a novel nanocomposite was fabricated using overoxidized polypyrrole film doped with nano-carbon dots (nano-CDs) on the pencil graphite electrode (PGE) surface for sensitive evaluation of Trp in human serum. Using square wave voltammetry (SWV), the overoxidized polypyrrole/carbon dots/pencil graphite electrode (Ov-Ox PPy/CDs/PGE) achieved excellent electrochemical catalytic activity for evaluating Trp. The modified electrode, known as Ov-Ox PPy/CDs/PGE, demonstrated superior electrochemical catalytic activity compared to bare PGE, CDs/PGE, PPy/PGE, and PPy/CDs/PGE for evaluation of Trp. The method's excellent sensitivity was confirmed by the low limits of detection (LOD = 0.003 μmol L-1) and limit of quantitation (LOQ = 0.009 μmol L-1). The biosensor that was developed can measure tryptophan (Trp) levels in the serum of both healthy individuals and female breast cancer patients with high accuracy and sensitivity. The results indicate that there is a significant difference, as shown by the F-test, between healthy individuals and those with breast cancer. This suggests that Trp amino acid could be an essential biomarker for cancer diagnosis. Consequently, liquid biopsy analysis presents a valuable opportunity for early disease detection, particularly for cancer.

Fabrication of polypyrrole gas sensor for detection of NH3 using an oxidizing agent and pyrrole combinations: Studies and characterizations

The organic polymer known as Polypyrrole (Ppy) is synthesized when pyrrole monomers are polymerized. Excellent thermal stability, superior electrical conductivity, and environmental stability are all characteristics of Polypyrrole. Chemical oxidative polymerization was used to synthesize Ppy using Ferric chloride (FeCl₃) as an oxidizing agent and surfactant CTAB in aqueous solution. Oxidant (FeCl₃) to pyrrole varied in different molar ratios (2, 3, 4 and 5). It was found that increasing this ratio up to 4 increases PPy's conductivity. XRD, FTIR, and SEM were used to characterize Ppy. The conductive nature of Ppy was studied by I-V characteristics. The best conductive polymer is studied for the NH₃ gas response.

Fabrication of hierarchical reduced graphene oxide decorated with core-shell Fe3O4@polypyrrole heterostructures for excellent electromagnetic wave absorption

The design of heterostructures with reasonable chemical composition and spatial structure is one of the effective strategies to achieve high performances electromagnetic wave (EMW) absorption. Herein, reduced graphene oxide (rGO) nanosheets decorated with hollow core-shell Fe₃O₄@PPy (FP) microspheres have been prepared by the combination of hydrothermal method, in situ polymerization method, directional freeze-drying and hydrazine vapor reduction. FP acting as traps can consume EMW trapped into their interior through the magnetic and dielectric losses. RGO nanosheets forming the conductive network are served as multi-reflected layers. Moreover, the impedance matching is optimized by the synergistic effect between FP and rGO. As expected, the synthetic Fe₃O₄@PPy/rGO (FPG) composite shows excellent EMW absorption performances with the minimum reflect loss (RL_min) of -61.20 dB at 1.89 mm and the effective absorption bandwidth (EAB) of 5.26 GHz at 1.71 mm. The excellent performances for the heterostructure are attributed to the synergistic effect of conductive loss, dielectric loss, magnetic loss, multiple reflection loss, and optimized impedance matching. This work provides a simple and effective strategy for the fabrication of lightweight, thin and high-performances EMW absorbing materials.

Polypyrrole-based nanocomposites doped with both salicylate/molybdate and graphene oxide for enhanced corrosion resistance on low-carbon steel

In this work, polypyrrole-based nanocomposites doped with graphene oxide, molybdate, and salicylate (PPy/GO/Mo/Sal) were synthesized via in situ electrochemical polymerization to enhance the anti-corrosion protection performance of polymer coatings. The morphology and structures of the coatings were characterized by SEM, EDX, FTIR, Raman spectroscopy, and XRD. The protection abilities of coatings against corrosion were investigated in 0.1 M NaCl solution with EIS potentiodynamic polarization, salt spray test, and open-circuit potential (OCP) measurements. The results showed that with the presence of both molybdate/salicylate and GO in the PPy matrix, the nanocomposite coating exhibited an excellent protection ability against corrosion for low-carbon steel, better than that with only GO as filler. Compared to the nanocomposites doped with only salicylate or salicylate/GO, the one doped with both molybdate/salicylate and GO exhibited the longest protection plateau (ca. 100 h) on the OCP-time curves with some fluctuation points known as the self-healing action of molybdate dopant. It also resulted in a decrease in the corrosion current (Tafel plots), a higher impedance (Bode plot), and a better protection performance in salt spray tests. In this case, the anti-corrosion ability of the coatings was provided through a barrier and self-healing mechanism.

An ultrasensitive bacterial imprinted electrochemical sensor for the determination of Lactobacillus rhamnosus GG

An ultrasensitive label-free electrochemical sensor based on a homemade imprinted polypyrrole (PPy) polymer film was prepared to achieve quantitative determination of Lactobacillus rhamnosus GG (LGG). The LGG-imprinted polymer (LIP) film was deposited on a portable screen-printed electrode (SPE) via electropolymerization, which constituted an independent integrated system. The main preparation parameters of the LIP sensor were investigated to obtain optimal performance. Under optimized conditions, the peak current response of the LIP sensor showed a linear relationship with the logarithmic value of LGG concentration in the range from 10¹ to 10⁹ CFU mL^-1 and a detection limit of 5 CFU mL^-1. The proposed LIP sensor has achieved efficient, ultrasensitive, highly selective, and cost-effective detection of LGG and can be further developed for practical applications in the quality inspection and development of probiotic products.

Removal of low-concentration tetracycline from water by a two-step process of adsorption enrichment and photocatalytic regeneration

Developing a high-performance method that can effectively control pollution caused by low concentrations of antibiotics is urgently needed. Herein, a novel three-dimensional PPy/Zn₃In₂S₆ nanoflower composites were prepared for the comprehensive treatment of low-concentration tetracycline (Tc) hydrochloride in wastewater based on the adsorption/photocatalysis of Zn₃In₂S₆ and the conductivity of PPy. In this preparation method, adsorption enrichment and photocatalytic regeneration were conducted in two steps, eliminating the dilution and dispersion effects of aqueous solvents on photocatalytic species and antibiotics. Results showed that Zn₃In₂S₆ could effectively adsorb 87.85% of Tc at pH of 4.5 and photocatalytically degrade Tc at pH of 10.5. Although the adsorption capacity of Zn₃In₂S₆ was slightly reduced after being combined with PPy, its photocatalytic efficiency was substantially enhanced. Specifically, 0.5%PPy/Zn₃In₂S₆ could degrade 99.92% of the surface-enriched Tc in 1 h and induce the regeneration of the adsorption sites. Furthermore, the adsorption capacity remained above 85% even after recycling PPy/Zn₃In₂S₆ ten times. The photocatalytic degradation mechanism analysis revealed that the enrichment of Tc on 0.5%PPy/Zn₃In₂S₆ negatively impacts the photocatalytic efficiency, while •O₂^- and •OH radicals were the main oxidative species that played an important role in the photoregeneration process.

Electrochemical assembly of single-walled carbon nanotube/polypyrrole/tellurium/lead telluride multi-layer nanocomposite films for room-temperature flexible thermoelectric application

With the complexity and diversification of thermoelectric (TE) application scenarios, it becomes increasingly difficult for single-component thermoelectric materials to satisfy practical demands. Therefore, recent researches have largely focused on the development of the multi-component nanocomposites, which are probably a good solution for the TE application of some materials that are not eligible when used alone. In this work, a seires of single-walled carbon nanotube (SWCNT)/polypyrrole (PPy)/tellurium (Te)/lead telluride (PbTe) multi-layer flexible composite films were fabricated via the successive electrodeposition of the flexible PPy layer with a low thermal conductivity, the ultra-thin Te induction layer, and the brittle PbTe layer with a large Seebeck coefficient over the pre-fabricated SWCNT membrane electrode with a high electrical conductivity. Through the complementary advantages between different components and the multiple synergies of the interface engineering, the SWCNT/PPy/Te/PbTe composites harvested the excellent TE performance with a maximum power factor (PF) of 929.8 ± 35.4 µW m^-1 K^-2 at room temperature, outperforming those of most of the electrochemically-prepared organic/inorganic TE composites reported previously. This work evidenced that the electrochemical multi-layer assembly is a feasible tactic for constructing special thermoelectric materials to meet customized requirements, which could also be applied to other material platforms.

Picomolar detection of As(III) ions by using hydrothermal synthesis of functionalized polymer dots as a highly selective fluorescence sensor

Arsenic is a toxic and ubiquitous metalloid that leads to a widespread health risk to human beings and other living organisms. In this paper, a novel water-soluble fluorescent probe based on functionalized polypyrrole dots (FPPyDots) was designed and applied to determine As(III) selectively and sensitively in aqueous media. FPPyDots probe was synthesized by using a hydrothermal method, via the facile chemical polymerization of pyrrole (Py) and cysteamine (Cys) and then functionalized with ditheritheritol (DTT). To investigate the chemical composition, morphology, and optical properties of the resultant fluorescence probe various characterization techniques including FTIR, EDC, TEM, Zeta potential, UV-vis, and fluorescence spectroscopies were used. The Stern-Volmer equation was used for calibration curves and show a negative deviation with the two linear concentration ranges of 270-2200 pM and 2.5-22.5 nM with an excellent limit of detection (LOD) of 110 pM. FPPyDots exhibit high selectivity to As(III) ions over various transition and heavy metal ions interferences. The performance of the probe has also been perused concerning the pH effect. Finally, to illustrate the applicability and reliability of the FPPyDots probe, the As(III) traces were identified in water real samples and compared with ICP-OES analysis.

Immobilization of polypyrrole on waste face masks using a novel in-situ-surface polymerization method: Removal of Cr(VI) from electroplating wastewater

AbstractIn this work, polypyrrole (PPy) was synthesized on the surface of waste surgical face masks (SFM) with a novel environmentally-friendly in-situ-surface polymerization approach and used as an adsorbent for removing hexavalent chromium (Cr(VI)). In this method, the SFM surface was activated using KMnO₄, resulting in the immobilization of porous MnO₂, on which pyrrole can be polymerized efficiently. The novelty of this method is the presence of the oxidant on the surface before the polymerization step, which results in a better surface modification with polypyrrole. This method provides adsorbents with higher adsorption capacity compared to the conventional polymerization method with ammonium persulfate (APS). The adsorbent prepared at the mass ratios of 1.0 and 2.0; respectively, for KMnO₄/SFM and pyrrole/SFM showed the highest performance. The adsorbent characterization revealed the successful polymerization of pyrrole on the surface of SFM. Reusability of the KMnO₄ and pyrrole solutions were successful with remarkable results, showing the advantage of this technique compared to the conventional polymerization method with APS. The effect of different factors on the adsorption process was investigated. The removal rate was around 98% under the optimum conditions (pH, 2; adsorbent dosage, 3 g L^-1; contact time, 60 min). The equilibrium data were well fitted by Langmuir isotherm (R²= 0.9999). Kinetic investigations revealed that the adsorption process fitted well with the pseudo-second-order model. The adsorbent was regenerated for up to five cycles. One of the most important advantages of the proposed method compared to other methods is the reduction of wastewater during the synthesis process.

Preparation of a novel metal-free polypyrrole-red phosphorus adsorbent for efficient removal of Cr(VI) from aqueous solution

The toxicity and carcinogenicity of Cr(VI) makes it a major threat to the health of animals and people. However, how to efficiently remove Cr(VI) still faces important challenges. In this study, a new metal-free polypyrrole-red phosphorus (PPy-RP) composite is successfully synthesized by in-situ oxidation polymerization for Cr(VI) removal from wastewater. The maximum adsorption capacity (q_m) of Cr(VI) on PPy-RP-1 is 513.2 mg/g when the pH value is 2, which is far superior to RP nanosheets (207.8 mg/g) and PPy (294.9 mg/g). The improved q_m can be ascribe to the good dispersion and increased specific surface area of PPy-RP adsorbent. Encouragingly, PPy-RP adsorbent still exhibits excellent stability after 7 cycles tests without a significant decline in removal efficiency, and remain above 81.4%. Based on the fittings of adsorption isotherms and kinetics, the process conforms to the pseudo-first-order kinetic model and the single-layer adsorption of the Langmuir model with an R² value of 0.98533. The adsorption process is chemical and monolayer. The experimental result demonstrates that the PPy-RP can efficient removal Cr(VI) by electrostatic attraction and complexation reaction (formation of N-Cr(VI) bond) through the PPy on the surface. The results of this study indicate that PPy-RP is a promising adsorbent to remove the Cr(IV).

A facile strategy to prepare FeNx decorated PtFe intermetallic with excellent acidic oxygen reduction reaction activity and stability

The construction of low-Pt-content intermetallic on carbon supports has been verified as a promising method to promote the activity of the oxygen reduction reaction (ORR). In this study, we have developed a simple and effective strategy to obtain a well-designed CNT-PtFe-PPy precursor. This precursor contains modulated Pt- and Fe-based content dispersed in polypyrrole (PPy) chain segments, which are in-situ generated on the templates of carbon nanotubes (CNTs). Subsequent pyrolysis of the CNT-PtFe-PPy precursor produces a CNT-PtFe@FeNC catalyst, which contains both Fe-N_x and PtFe intermetallic active sites. Due to the highly efficient dispersion of active species, the CNT-PtFe@FeNC electrocatalyst displays a 9.5 times higher specific activity (SA) and 8.5 times higher mass activity (MA) than those of a commercial Pt/C catalyst in a 0.1 M HClO₄ solution. Additionally, these results, combined with excellent durability (the SA and MA maintained 94 % and 91 % of initial activity after a 10-k cycle accelerated durability test), represent among the best performance achieved so far for Pt-based ORR electrocatalysts. Furthermore, density functional theory (DFT) calculations revealed that the presence of Fe-N₄ species reduces the adsorption energy between the PtFe intermetallic compound and OH*, accelerating the ORR process.

Anticancer polypyrrole-polyethylenimine drug-free nanozyme for precise B-cell lymphoma therapy

As an alternative strategy for cancer treatment, the combination of cancer nanomedicine and immunotherapy is promising with regard to efficacy and safety; however, precise modulation of the activation of antitumor immunity remains challenging. Therefore, the aim of the present study was to describe an intelligent nanocomposite polymer immunomodulator, drug-free polypyrrole-polyethyleneimine nanozyme (PPY-PEI NZ), which responds to the B-cell lymphoma tumor microenvironment, for precision cancer immunotherapy. Earlier engulfment of PPY-PEI NZs in an endocytosis-dependent manner resulted in rapid binding in four different types of B-cell lymphoma cells. The PPY-PEI NZ effectively suppressed B cell colony-like growth in vitro accompanied by cytotoxicity via apoptosis induction. During PPY-PEI NZ-induced cell death, mitochondrial swelling, loss of mitochondrial transmembrane potential (MTP), downregulation of antiapoptotic proteins, and caspase-dependent apoptosis were observed. Deregulated AKT and ERK signaling contributed to glycogen synthase kinase-3-regulated cell apoptosis following deregulation of Mcl-1 and MTP loss. Additionally, PPY-PEI NZs induced lysosomal membrane permeabilization while inhibiting endosomal acidification, partly protecting cells from lysosomal apoptosis. PPY-PEI NZs selectively bound and eliminated exogenous malignant B cells in a mixed culture system with healthy leukocytes ex vivo. While PPY-PEI NZs showed no cytotoxicity in wild-type mice, they provided long-term and efficient inhibition of the growth of B-cell lymphoma-driven nodules in a subcutaneous xenograft model. This study explores a potential PPY-PEI NZ-based anticancer agent against B-cell lymphoma.

Fabrication of CuS/Fe(3)O(4)@polypyrrole flower-like composites for excellent electromagnetic wave absorption

Recently, electromagnetic radiation is a serious threat to equipment accuracy, military safety and human health. The combination with different materials to fabricate absorber composites with well-designed morphology is expected to ameliorate this issue. In here, CuS/Fe₃O₄@polypyrrole (CuS/Fe₃O₄@PPy) flower-like composites are constructed by the combination of hydrothermal method, solvothermal method and in-situ polymerization. CuS with flower-like structure consisting of nanosheets can provide a conductive backbone and large specific surface area. Hollow Fe₃O₄ microspheres play a key role in deciding magnetic loss, and electromagnetic waves can penetrate their hollow structure, result in multiple reflection and refraction. PPy coating can enhance the combined strength of composite, and effectively consume microwaves by scattering and multiple refraction in the intercalated structure. As expected, the minimum reflection loss (RL_min) of CuS/Fe₃O₄@PPy composites is -74.12 dB at 8.16 GHz with a thickness of 2.96 mm, and the effective absorption bandwidth (EAB) is 4.6 GHz (13.4-18.0 GHz) at 1.68 mm. The excellent electromagnetic wave absorption performances are attributed to the synergy effect of different components. This work provides a unique strategy for the structural design of flower-like microspheres in the field of electromagnetic wave absorption.