An Ultralow-concentration and Moisture-resistant Electrolyte of Lithium Difluoro(oxalato)borate in Carbonate Solvents for Stable Cycling in Practical Lithium-ion Batteries

The electrolyte concentration not only impacts the battery performance but also affects the battery cost and manufacturing. Currently, most studies focus on high-concentration (>3 M) or localized high-concentration electrolytes (~1 M); however, the expensive lithium salt imposes a major concern. Most recently, ultralow concentration electrolytes (<0.3 M) have emerged as intriguing alternatives for battery applications, which feature low cost, low viscosity, and extreme-temperature operation. However, at such an early development stage, many works are urgently needed to further understand the electrolyte properties. Herein, we introduce an ultralow concentration electrolyte of 2 wt % (0.16 M) lithium difluoro(oxalato)borate (LiDFOB) in standard carbonate solvents. This electrolyte exhibits a record-low salt/solvent mass ratio reported to date, thus pointing to a superior low cost. Furthermore, this electrolyte is highly compatible with commercial Li-ion materials, forming stable and inorganic-rich interphases on the lithium cobalt oxide (LiCoO2) cathode and graphite anode. Consequently, the LiCoO2-graphite full cell demonstrates excellent cycling performance. Besides, this electrolyte is moisture-resistant and effectively suppresses the generation of hydrogen fluoride, which will markedly facilitate the battery assembly and recycling process under ambient conditions.

Boosting the Cell Performance of the SiO/Cu and SiO/PPy Anodes via In-Situ Reduction/Oxidation Coating Strategies

Silicon monoxide (SiO) has attracted great attention due to its high theoretical specific capacity as an alternative material for conventional graphite anode, but its poor electrical conductivity and irreversible side reactions at the SiO/electrolyte interface seriously reduce its cycling stability. Here, to overcome the drawbacks, the dicharged SiO anode coated with Cu coating layer is elaborately designed by in-situ reduction method. Compared with the pristine SiO anode of lithium-ion battery (293 mAh g-1 at 0.5 A g-1 after 200 cycles), the obtained SiO/Cu composite presents superior cycling stability (1206 mAh g-1 at 0.5 A g-1 after 200 cycles). The tight combination of Cu particles and SiO significantly improves the conductivity of the composite, effectively inhibits the side-reaction between the active material and electrolyte. In addition, polypyrrole-coated SiO composites are further prepared by in-situ oxidation method, which delivers a high reversible specific capacity of 1311 mAh g-1 at 0.5 A g-1 after 200 cycles. The in-situ coating strategies in this work provide a new pathway for the development and practical application of high-performance silicon-based anode.

Long-Life, High-Rate Rechargeable Lithium Batteries Based on Soluble Bis(2-pyrimidyl) Disulfide Cathode

Organosulfides are promising candidates as cathode materials for the development of electric vehicles and energy storage systems due to their low-cost and high capacity properties. However, they generally suffer from slow kinetics because of the large rearrangement of S-S bonds and structural degradation upon cycling in batteries. In this paper, we reveal that soluble bis(2-pyrimidyl) disulfide (Pym2 S2 ) can be a high-rate cathode material for rechargeable lithium batteries. Benefiting from the superdelocalization of pyrimidyl group, the extra electrons prefer to be localized on the π* (pyrimidyl group) than σ* (S-S bond) molecular orbitals initially, generating the anion-like intermedia of [Pym2 S2 ]2- and thus decreasing the dissociation energy of the S-S bond. It makes the intrinsic energy barrier of dissociative electron transfer depleted, therefore the lithium half cell exhibits 2000 cycles at 5 C. This study provides a distinct pathway for the design of high-rate, long-cycle-life organic cathode materials.

A Systematic Study on the Effects of Solvating Solvents and Additives in Localized High-Concentration Electrolytes over Electrochemical Performance of Lithium-Ion Batteries

Localized high-concentration electrolytes (LHCEs) based on five different types of solvents were systematically studied and compared in lithium (Li)-ion batteries (LIBs). The unique solvation structure of LHCEs promotes the participation of Li salt in forming solid electrolyte interphase (SEI) on graphite (Gr) anode, which enables solvents previously considered incompatible with Gr to achieve reversible lithiation/delithiation. However, the long cyclability of LIBs is still subject to the intrinsic properties of the solvent species in LHCEs. Such issue can be readily resolved by introducing a small amount of additive into LHCEs. The synergetic decompositions of Li salt, solvating solvent and additive yield effective SEIs and cathode electrolyte interphases (CEIs) in most of the studied LHCEs. This study reveals that both the structure and the composition of solvation sheaths in LHCEs have significant effect on SEI and CEI, and consequently, the cycle life of energetically dense LIBs.

Competitive Doping Chemistry for Nickel-Rich Layered Oxide Cathode Materials

Chemical modification of electrode materials by heteroatom dopants is crucial for improving storage performance in rechargeable batteries. Electron configurations of different dopants significantly influence the chemical interactions inbetween and the chemical bonding with the host material, yet the underlying mechanism remains unclear. We revealed competitive doping chemistry of Group IIIA elements (boron and aluminum) taking nickel-rich cathode materials as a model. A notable difference between the atomic radii of B and Al accounts for different spatial configurations of the hybridized orbital in bonding with lattice oxygen. Density functional theory calculations reveal, Al is preferentially bonded to oxygen and vice versa, and shows a much lower diffusion barrier than B^III . In the case of Al-preoccupation, the bulk diffusion of B^III is hindered. In this way, a B-rich surface and Al-rich bulk is formed, which helps to synergistically stabilize the structural evolution and surface chemistry of the cathode.

Boosting lithium-ion storage performance by ultrafine bimetal carbides nanoparticles coupled with Hollow-like carbon composites

Metallic carbides demonstrated tremendous application potential in energy conversion field deriving from their distinctive electrochemical activity and chemical stability. Herein, a molybdenum-based hybrid self-template strategy was adopted to confine ultrafine molybdenum carbides and tungsten carbides nanoparticles in N, P-codoped carbon nanotubes (MoC/WC@N, P-CNTs) for enhanced lithium-ion storage. Specifically, hierarchical MoW-polydopamine nanotubes were prepared via a self-template strategy, which employed Mo₃O₁₀(C₆H₈N)₂·2H₂O nanowires as the template. Ultrafine MoC and WC nanoparticles embedded in ultrathin carbon nanosheets could be obtained rationally after carbonization treatment, which could not only prevent carbides nanoparticles from agglomeration and oxidation, but also endow the rapid electron transfer rate. Thus, MoC/WC@N, P-CNTs displayed outstanding lithium storage abilities with great rate property and long-term cycling durability. The stable specific capacity of 475.0 mAh g^-1 could be preserved at high current intensity of 5.0 A g^-1 after 1000 cycles, which was one of the best performances for metal carbides anodes. Furthermore, the successful fabrication of lithium-ion hybrid capacitors (LIHCs) delivered the maximum energy density of 117 Wh kg^-1 and power density of 6571 W kg^-1. Moreover, the superior capacity retention of 89.7 % after 2000 cycles also indicated the excellent cycling stability. The present work highlights a self-template strategy for designing nanostructures toward efficient energy storage and conversion fields.

Mechanical Composite of LiNi0.8Co0.15Al0.05O2/Carbon Nanotubes with Enhanced Electrochemical Performance for Lithium-Ion Batteries

LiNi_0.8Co_0.15Al_0.05O₂/carbon nanotube (NCA/CNT) composite cathode materials are prepared by a facile mechanical grinding method, without damage to the crystal structure and morphology of the bulk. The NCA/CNT composite exhibits enhanced cycling and rate performance compared with pristine NCA. After 60 cycles at a current rate of 0.25 C, the reversible capacity of NCA/CNT composite cathode is 181 mAh/g with a discharge retention rate of 96%, considerably higher than the value of pristine NCA (153 mAh/g with a retention rate of 90%). At a high current rate of 5 C, it also can deliver a reversible capacity of 160 mAh/g, while only 140 mAh/g is maintained for the unmodified NCA. Highly electrical conductive CNTs rather than common inert insulating materials are for the first time employed as surface modifiers for NCA, which are dispersed homogenously on the surface of NCA particles, not only improving the electrical conductivity but also providing effective protection to the side reactions with liquid electrolyte of the battery.

Hydrothermal Synthesis and Electrochemical Performance of Manganese Oxide (Na-OMS-2) Nanorods

Sodium octahedral molecular sieve nanorods (Na-OMS-2) were prepared through a facile hydrothermal method. The effects of reaction temperature and duration on particle sizes of the products were investigated. The electrochemical performance of samples was studied by constant current charge–discharge tests as cathode material for Li-ion batteries (LIBs). The initial discharge capacity of Na-OMS-2 is 123.4 mAh g−1 and the capacity retention was 123.9 mAh g−1 after 100 cycles. The result demonstrates that Na-OMS-2 cathode material behaves a good cycling stability.