Long-term sealing ability of Pulp Canal Sealer, AH-Plus, GuttaFlow and Epiphany

Effects of radiotherapy dose and application time on the load-to-failure values of teeth filled with different sealers

BACKGROUND

The materials used in root canal filling and radiotherapy (RT) application can affect the load-to-failure of the teeth. This study aimed to compare the load-to-failure of the teeth filled with AH Plus (AHP) or AH Plus bioceramic (AHPB) before or after 60 Gy- and 70 Gy-dose radiotherapy.

MATERIALS AND METHODS

One hundred and ten maxillary incisors were endodontically prepared up to ProTaper Next X4 instruments. The teeth were randomly divided into 5 main groups as: non-irradiated, root canal treatment (RCT) before 60 Gy radiotherapy, RCT before 70 Gy radiotherapy, RCT after 60 Gy radiotherapy, RCT after 70 Gy radiotherapy. These groups were divided into 2 subgroups for filling material: AHP ve AHPB. After filling and radiotherapy procedures, the teeth were fixed on the thermoplastic mask plane. The plane were placed in the middle of a rectangular prism shaped glass phantom, and irradiated via a linear accelerator device. The teeth were then embedded in cylindrical acrylic blocks and the force (N) that caused the fracture was recorded under the Universal testing device. Student t-test was used for statistical comparisons. Statistical significance level was determined as p < 0.05.

RESULTS

After 70 Gy dose radiotherapy, the group filled with AHPB showed statistically significantly lower fracture strength than the group filled with AHP (p < 0.05). In the control group, before 60 Gy RT group, after 60 Gy RT group, and before 70 Gy RT group, the sealers had statistically significantly similar load-to-failure. (p > 0.05).

CONCLUSION

The group filled with AHPB caused a lower fracture strength than the group filled with AHP following a 70 Gy dose of RT. The sealers in the control group, before 60 Gy RT group, after 60 Gy RT group, and before 70 Gy RT group exhibited comparable load-to-failure values.

Field Emission Scanning Electron Microscope Analysis of the Marginal Adaptation of Various Root Canal Sealers at the Dentin-Sealer and Sealer-Guttapercha Interfaces at Three Root Canal Levels: An In Vitro Study

Aims An in vitro evaluation of the marginal adaptation of four root canal sealer variants at the dentin-sealer and sealer gutta-percha interfaces in the coronal, middle, and apical thirds of root canals was conducted using field emission scanning electron microscope (FESEM) analysis.  Materials and methods In total, 80 extracted human mandibular premolar teeth were used in this study. All teeth were decoronated to standardize the root length to 14 mm. A round bur was used to gain access into canal orifices and the working length was determined. Root canal instrumentation was performed using the crown-down technique with ProTaper Next rotary files up to size X3, along with the use of root canal irrigants. All specimens were then randomly divided into four groups, with 20 specimens per group, depending on the root canal sealer used: Group A consisted of AH Plus (Dentsply Maillefer, Ballaigues, Switzerland), Group B of MTA-Fillapex (Angelus Dental, Londrina, Brazil), Group C of Bio-C Sealer (Angelus Dental), and Group D of GuttaFlow-2 (Coltene Whaledent, Altstatten, Switzerland). All specimens were obturated with size X3 gutta-percha points uniformly coated with respective sealers in the single-cone technique and coronal access was sealed with glass ionomer cement. The specimens were incubated for seven days and then horizontally sectioned at the coronal, middle, and apical thirds of the root canals. On each sample obtained, three points were randomly chosen and both sealer-dentin and sealer gutta-percha interfaces were examined under FESEM at 1000x magnification. The marginal gaps of all four sealers at both interfaces and at three levels of root canals were measured in µm and values were recorded, tabulated, and used for data analysis. One-way analysis of variance (ANOVA) and post hoc Bonferroni tests were used for statistical analysis. A p-value ≤ 0.05 was considered statistically significant. Results Compared to the sealer gutta-percha interface, AH Plus, MTA-Fillapex, and Bio-C sealers at all three levels of the root canals showed more marginal gaps at the sealer-dentin interface with a significant difference (p<0.05). However, the GuttaFlow-2 sealer showed no significant difference (P > 0.05).  Conclusions The marginal adaptation of the GuttaFlow-2 sealer is superior to both dentin and gutta-percha at the coronal, middle, and apical thirds of root canals compared to other sealers used in the study.

Comparative Analysis of Interfacial Adaptation and Depth Penetration of Recent HiFlow versus Regular Bioceramic Sealers in Conjunction with BC Gutta-Percha Points Using Two Different Obturation Techniques-A Preliminary Report of an Ex Vivo Study

This study aimed to assess the adaptability and penetration depth capacity of recent bioceramic systems, including regular EndoSequence (BC) versus HiFlow (BCH) sealers in the presence of BC points. A total of 54 single-rooted teeth were instrumented and obturated with either the cold or warm compaction technique (n = 9), using either BC, BCH, or AH Plus (AHP) combined with BC points. The adaptation, film thickness, and gaps/voids were evaluated by scanning electron microscopy. The sealer/dentin interface was evaluated by Raman spectroscopy, and depth penetration was evaluated by a confocal laser scanning microscope. According to the normality test, the data were statistically analyzed by ANOVA or Kruskal-Wallis and Mann-Whitney U tests at p < 0.05. BCH sealer showed the significantly thinnest film with the greatest flow (p > 0.001), with further improvement when subjected to the warm compaction technique. Moreover, it exhibited close adaptation with deep penetration into radicular dentin, forming a tag-like structure. The Raman spectra also indicated close contact with the dentin surface. The use of BC sealer with BC points exhibited homogenous, single-unit obturation, either with a cold or warm technique. Furthermore, the use of the warm compaction technique with BCH sealer achieved a gap-free interface associated with tag-like structures, which exhibit the monoblock phenomenon.

Effect of different sealer activation techniques on dentinal tubule penetration

The aim of this study was to evaluate the influence of different activation techniques on dentin tubule penetration of root canal sealer. Seventy-five teeth with single canals were chemomechanically prepared. A calcium silicate-based sealer was stained with a fluorescent dye (rhodamine B), placed into the canals and activated according to the following groups: control (no activation), EDDY, EndoActivator, ultrasonic and XP-Endo Finisher. Then, the samples were obturated. The percentages of sealer penetration at various depth levels of root sections were measured with confocal laser scanning microscopy. XP-Endo Finisher presented the highest penetration at 50 μm (p < 0.05). XP-Endo Finisher showed similar penetration with EDDY at 100 and 200 μm (p > 0.05) while presented higher penetration than the other groups (p < 0.05). At 500 μm, XP-Endo Finisher presented higher penetration than EndoActivator (p < 0.05) while similar penetration with the other groups (p > 0.05). XP-Endo Finisher can be recommended for activation during sealer placement for better penetration into dentin tubules.

Cytocompatibility and cell migration evaluation of calcium silicate-based root canal sealer compared to epoxide-amine resin sealer in stem cells from human apical papilla: An in-vitro study

The purpose of this study was to assess the effect of a calcium silicate-based sealers (CeraSeal) and an epoxy resin-based sealer (AH Plus) on cytotoxicity and cell migration of stem cell from the human apical papilla (hSCAPs) by using the Alamar Blue, Annexin V-FICT and wound healing assays. In Alamar Blue assay, hSCAPs exposed to undiluted CeraSeal extract had significantly higher cell viability compared with that observed when cells were treated with AH Plus in all experimental period (p < 0.001). The flow cytometry analysis confirmed the comparison on viable cells and indicated that AH Plus increased apoptosis compared to CeraSeal and the control groups (p < 0.001). Additionally, AH Plus exhibited significantly lower level of cell migration than CeraSeal and the control for up to 48 h observation (p < 0.01). In summary, calcium silicate-based sealer (CeraSeal) is less cytotoxic and more biocompatible than epoxy resin-based sealer (AH Plus).

Evaluation of push-out bond strength, dentinal tubule penetration and adhesive pattern of bio-ceramic and epoxy resin-based root canal sealers

INTRODUCTION

Root canal sealing materials play a crucial role in an endodontic procedure by forming a bond between the dentinal walls and the gutta-percha. The current study aims to analyse the dentinal tubule penetration and adhesive pattern, including the push-out bond strength of six commercially available root canal sealers.

METHODOLOGY

Eighty-four mandibular first premolars were split into seven groups (and n = 12), Group 1: Dia-Root, Group 2: One-Fil, Group 3: BioRoot RCS, Group 4: AH Plus, Group 5: CeraSeal, Group 6: iRoot SP, Group 7: GP without sealer (control). Two groups were made, one for dentinal tubule penetration and the other for push-out bond strength; the total sample size was one hundred sixty-eight. Root canal treatment was performed using a method called the crown down technique, and for obturation, the single cone technique was used. A confocal laser scanning microscope (Leica, Microsystem Heidel GmbH, Version 2.00 build 0585, Germany) was used to evaluate dentinal tubule penetration, and Universal Testing Machine was utilised to measure the push-out bond strength (Shimadzu, Japan) using a plunger size of 0.4 mm and speed of 1mm/min. Finally, the adhesive pattern of the sealers was analysed by HIROX digital microscope (KH-7700). Statistical analysis was carried out by a one-way Anova test, Dunnet's T3 test, and Chi-square test.

RESULTS

Highest dentinal tubule penetration was noticed with One-Fil (p<0.05), followed by iRoot SP, CeraSeal, AH Plus, Dia-Root also, the most negligible value was recorded for BioRoot RCS. Meanwhile, BioRoot RCS (p<0.05) demonstrated the greater value of mean push-out bond strength, followed by One-fil, iRoot SP, CeraSeal, AH Plus and Dia-Root. Regarding adhesive pattern, most of the samples were classified as type 3 and type 4 which implies greater sealing ability and better adherence to the dentinal wall. However, BioRoot RCS revealed the most type 4 (p<0.05), followed by AH Plus, One-Fil, CeraSeal and Dia-Root.

CONCLUSION

The highest dentinal tubule penetration was shown by One-Fil compared to other groups. Meanwhile, BioRoot RCS had greater push-out bond strength and more adhesive pattern than other tested materials.

Comparison of the Fracture Resistance of Root-Canal-Treated Premolars Obturated With Dissimilar Materials: An In Vitro Study

Introduction The utilization of endodontic sealers is of paramount importance in ensuring the sustained efficacy and resilience of endodontic treatment. The primary objective of the research was to appraise and contrast the fracture resistance (FR) of three distinct categories of endodontic sealing materials that are frequently employed in the context of endodontic therapy. Materials and methods This research used an in vitro experimental design. Sixty single-rooted human teeth indicated for extraction were utilized according to established protocols. These teeth were then arbitrarily divided into four piles, one for each of the four possible sealants. All specimens were put through a standardized thermal cycling procedure to simulate clinical conditions after the root canals were obturated. The subsequent step involved testing the FR of each group by utilizing a universal testing machine up until failure. Any statistically significant difference in FR among the three sealing materials was identified through appropriate statistical analysis. Results Group 1, which utilized a particular sealing material, exhibited the highest mean fracture resistance, measuring at an impressive 1198.33 ± 321.4 Newtons (N). A post hoc analysis was done to see the exact differences between each group and statistically significant differences between Groups 1 and 2 (p<0.05), Groups 1 and 4 (p<0.05), and Groups 3 and 4 (p<0.001) were observed. Conclusion The FR of Group 1 specimens were noticeably greater than those of Group 2 and Group 4 while the FR of Group 3 specimens was more than that of the Group 4 specimens. This study provides important insights into the fracture resistance of various endodontic sealing materials.

Effectiveness of root canal filling materials and techniques for treatment of apical periodontitis: A systematic review

BACKGROUND

Apical periodontitis (AP) is an inflammatory disease of the apical periodontium as sequelae of pulp death. It is managed by disinfection and filling of the root canal space.

OBJECTIVES

The aim of this systematic review was to investigate whether obturation techniques and materials used for root canal filling led to the management of AP.

METHODS

A systematic review protocol was written following the preferred reporting items for systematic reviews and meta-analyses (PRISMA) checklist and registered on the international prospective register of systematic reviews (PROSPERO; CRD42021260275) including two populations, interventions, comparisons, outcomes and time (PICOT) for the research questions querying the effectiveness of obturation techniques (PICOT 1) and materials (PICOT 2) for the management of AP. Electronic searches were conducted on PubMed, ScienceDirect, Scopus and Embase search engines. Searches on International Endodontic Journal, Journal of Endodontics, Clinical Oral Investigations, Journal of Dental Research and Journal of Dentistry websites were also conducted, until May 2021. Both primary (tooth survival) and secondary outcomes were evaluated. The risk of bias was assessed by Cochrane RoB2 for the randomized and ROBINS-I for the nonrandomized trials.

RESULTS

The search strategy identified 1652 studies, with 1600 excluded on the title and abstract screening, leaving 52 studies for full-text screening. In total, 10 studies met the inclusion criteria. The obturation technique and materials used did not affect the outcome of AP. Vertical compaction resulted in faster resolution of periapical lesions. The oral health-related quality of life of patients treated with lateral condensation exhibited poorer outcomes compared with single matched cone after 6 months of recall.

DISCUSSION

The inclusion and exclusion criteria used for this systematic review enabled the capture of all the literature available on the effect of obturation techniques and materials on the outcome of AP. The data were heterogenous, and a number of articles investigating obturation techniques had no information on the materials and techniques used as they looked at the quality of fill.

CONCLUSIONS

Included studies did not find any difference between different procedures (PICOT 1) and materials (PICOT 2). The risk of bias was high, thus the findings should be interpreted with caution.

REGISTRATION

PROSPERO registration number: CRD42021260275.

An In Vitro Comparative Study of the Push-out Bond Strengths of Various Endodontic Sealers to Radicular Dentin

BACKGROUND

The bond strength of an endodontic sealer to the root dentin is an important factor in maintaining the integrity of the root canal seal. The present study aimed to assess the push-out bond strength of three endodontic sealers used with the single-cone obturation technique.

MATERIALS AND METHODS

The root canals of 40 central maxillary incisors were instrumented using ProTaper Universal NiTi rotary files. The roots were divided into 4 groups (N = 10) according to the type of root canal sealers: Group 1 (control group): AH Plus/Gutta-percha lateral condensation technique (LC); Group 2: AH Plus/Gutta-percha single-cone technique (SC); Group 3: GuttaFlow 2/SC; Group 4: Realseal SE/SC. After obturation, each tooth was prepared for push-out assessment. The total and sectional push-out bond strengths were measured and statistically analysed. Furthermore, failure modes were identified microscopically.

RESULTS

The results indicated that samples in the first group showed the highest total and sectional bond strengths. Samples from other groups showed statistically similar total bond strengths. The highest sectional bond strength was found mainly in the apical root sections. Cohesive failure was predominant for the first group, whereas adhesive failure was predominant in the other groups.

CONCLUSIONS

It could be concluded that the dentin bond strengths of the tested sealers used with the single-cone technique were nearly similar but lower than those of AH Plus/LC. The highest sectional bond strength was observed in the apical thirds. The failure mode was mostly cohesive for AH Plus/LC and adhesive for sealers used with the single-cone obturation technique.

Effects of calcium hydroxide intracanal medicament on push-out bond strength of endodontic sealers: A systematic review and meta-analysis

OBJECTIVE

To investigate the effect of calcium hydroxide intracanal medicament on the push-out bond strength of resin-based and calcium silicate-based endodontic sealers.

METHODS

A comprehensive search of was conducted for all relevant in-vitro studies. All randomized controlled in-vitro studies that evaluated the effect of calcium hydroxide on the push-out bond strength of resin-based or calcium silicate-based endodontic sealers were assessed. The variables of interest were extracted, and the risk of the included studies was evaluated. The standardized mean difference was calculated and the significance level was set at p value <0.05.

RESULTS

A total of 26 studies were eligible for analysis. There were 45 independent comparison groups and 1009 recruited teeth. The pooled data showed no significant difference in push-out bond strength between calcium hydroxide and control group in the resin-based group (SMD = 0.03; 95% CI = -0.55, 0.60; p = 0.93), and calcium silicate-based group (SMD = 0.02; 95% CI = -0.31, 0.35; p = 0.90). Most of the studies (21 out of 26) were at medium risk of bias and five studies showed a low risk of bias.

CONCLUSION

The available evidence suggests that calcium hydroxide used as intracanal medication does not influence the push-out bond strength of the resin- and calcium silicate-based endodontic sealers.

CLINICAL SIGNIFICANCE

The results of this meta-analysis suggest that calcium hydroxide used as intracanal medication does not influence the push-out bond strength of resin-based and calcium silicate-based endodontic sealers.

Biological Evaluation of the Effect of Root Canal Sealers Using a Rat Model

Gutta-percha points and root canal sealers have been used for decades in endodontics for root canal obturation. With techniques such as single cone methods, the amount of sealer is larger, making their properties more critical. However, relatively few reports have comprehensively evaluated their biological effects. To this end, we evaluated three types of sealers, zinc oxide-fatty acid-, bio-glass- and methacrylate resin-containing sealers were considered. Their biological effects were evaluated using a rat subcutaneous implantation model. Each sealer was loaded inside a Teflon tube and implanted subcutaneously in the backs of rats. Inflammatory cells were observed around all samples 7 days after implantation and reduced after 28 days. Our results revealed that all samples were in contact with the subcutaneous tissue surrounding the sealer. Additionally, Ca and P accumulation was observed in only the bio-glass-containing sealer. Furthermore, each of the three sealers exhibited unique immune and inflammatory modulatory effects. In particular, bio-glass and methacrylate resin sealers were found to induce variable gene expression in adjacent subcutaneous tissues related to angiogenesis, wound healing, muscle tissue, and surrounding subcutaneous tissue. These results may help to understand the biological impacts of root canal sealers on surrounding biological tissues, guiding future research and comparisons with new generations of materials.

The Effect of Primary Root Canal Treatment on Dentinal Tubule Penetration of Calcium Silicate-based Sealers during Endodontic Retreatment

INTRODUCTION

The aim of this study was to evaluate the effect of previous root canal treatment on dentinal tubule penetration of calcium silicate-based sealers during endodontic retreatment and to compare 2 different (commonly used and modified) tubule penetration depth measurement techniques.

METHODS

The crowns of mandibular premolar teeth were removed, and root canals were prepared (ProTaper Universal; Dentsply Sirona, York, PA) and obturated using AH Plus (AH; Dentsply DeTrey, Konstanz, Germany), MTA Fillapex (MTAF; Angelus, Londrina, Brazil), and WellRoot ST (WRST; Vericom, Gyeonggi-do, South Korea); 0.1% red Rhod-2 dye (Chemodex, St Gallen, Switzerland) was added to the sealers. After storage for 3 weeks (37°C, 100% humid), the following sealer combination subgroups were created (the sealer used during the primary root canal treatment/the sealer used during the retreatment, n = 8): AH/AH, AH/MTAF, and AH/WRST; MTAF/AH, MTAF/MTAF, and MTAF/WRST; and WRST/AH, WRST/MTAF, and WRST/WRST. Green Fluo-3 dye (0.1%) was added to the sealers during retreatment. Sealer penetration depths were measured at 8 points and averaged, and the ratio of the retreatment sealer to the initial sealer was recorded as the mean tubule penetration depth ratio in the first technique, whereas the percentage of the circumferential penetration area ratios of the retreatment and initial sealers was calculated in the second technique. Statistical analyses were performed using Kolmogorov-Smirnov, Kruskal-Wallis, and Mann-Whitney U tests.

RESULTS

The mean penetration depth of AH and MTFA was found to be higher at the coronal third region in the control groups (P < .05). Both methods showed a significant difference among the groups at the coronal and median regions (P < .05). The AH/WRST, MTAH/AH, MTAF/MTAF, MTAF/WRSTS, and WRST/WRST groups showed deeper tubule penetration (first technique, P = .01). Both techniques showed that the penetration depth of the sealers was the same at the apical region (P > .05), whereas a difference was found among the techniques at the coronal and median regions. The sealers used in the previous root canal treatment limited the penetration depth of the sealers used during the retreatment process (P < .05). When MTAF was used as the initial sealer, the penetration depth of the second sealer did not change, whereas if WRST was the initial sealer, the penetration depth of the sealers at the median and apical regions is negatively affected during the retreatment process (P < .05).

CONCLUSIONS

Previous root canal treatment affects the penetration depth of calcium silicate-based sealers. The use of AH Plus and MTA Fillapex during the retreatment process showed an advantage. Both measurement techniques showed similar performances at the apical region, whereas the results varied at the coronal and midcoronal regions; therefore, a more stable sealer penetration measurement technique is still necessary.

Comparison of Sealing Ability of Bioceramic Sealer, AH Plus, and GuttaFlow in Conservatively Prepared Curved Root Canals Obturated with Single-Cone Technique: An In vitro Study

Background:

Inadequate obturation techniques of the root canal system have been found to be the most frequent reason of failure post root canal treatment. An ideal endodontic sealer should fulfill all ideal requisites. The present study aimed to compare apical sealing ability between bioceramic (BC) sealer, GuttaFlow, and AH Plus.

Methodology:

One hundred and twenty-five curved roots of maxillary and mandibular third molar teeth with fully formed apex were collected for this study. The root canals were cleaned and shaped using a standard single-cone preparation to file at the established working length and divided into five groups of 25 each. Dye leakage was carried out. Group A: with GP, using EndoSequence BC sealer with conventional with 4% gutta-percha (Brasseler USA, Savannah, Georgia, USA); Group B: with ceramic coated with 4% gutta-percha (Brasseler USA, Savannah, Georgia, USA); Group C: with GP, using AH Plus sealer (Dentsply, De-Trey Konstanz, Germany) with 4% gutta-percha; Group D: with GuttaFlow bioseal (Roeko-Coltène/Whaledent, Langenau, Germany) with 4% Gutta-percha; and Group E is a negative control group. Statistical analysis was done using the Statistical Package for the Social Sciences software and Student's unpaired t-test.

Results:

The group AH Plus showed more leakage values than the GuttaFlow group and of two groups of BC sealer and negative control. Student's unpaired t-test disclosed no significant difference (P < 0.05) between the groups.

Conclusion:

None of the sealers used in the study could completely seal the apical foramen to have a fluid-tight seal.

In vitro Assessment of Apical Microleakage of Teeth Sealed with Three Different Root Canal Sealers: A Comparative Study

Background

For the success of an endodontic treatment, a hermetic seal is of utmost importance. The event of entry of cariogenic bacteria through the interface between the tooth and the restoration of a proliferation of these microbes and subsequent adverse effects on the pulpal tissue or recurrent caries can be expected. Hence, the present study was undertaken for evaluating the apical microleakage of teeth sealed with four different root canal sealers.

Materials and Methods

Collection of a total of ninety freshly extracted mandibular first premolars was done for the present study. Establishment of working length was done by measuring the root canal length and subtracting 1 mm from it. All the specimens were divided into three study groups as follows: Group A: Endofill sealer group, Group B: EndoREZ sealer group, and Group C: AH Plus group. The resin points were supplied with the sealer (according to their respective study groups), and obturation was done. Application of four layers of nail polish was done on the entire tooth surface leaving the apical 2 mm portion. This was followed by immersion of the specimens in the India ink followed by storage for 1 week at room temperature. Afterward, thorough washing of the specimens was done in running water. Removal of the nail polish was done. All the specimens were observed under microscope for assessing the extent of dye penetration.

Results

The mean apical dye penetration among specimens of Group A, Group B, and Group C was found to be 0.86 mm, 0.39 mm, and 0.03 mm, respectively. While comparing statistically, significant results were obtained. The mean apical dye penetration was highest for Group A and was lowest for Group C.

Conclusion

Minimal microleakage is exhibited by a resin-based sealer. Hence, they provide a better apical seal in patients undergoing root canal therapy.

Porosity Distribution in Single Cone Root Canal Fillings Performed by Operators with Different Clinical Experience: A microCT Assessment

The objective of this study was to assess the porosity distribution of BioRoot RCS/single gutta-percha point root-canal fillings performed by a general dental practitioner and endodontist. Fourteen plastic models of maxillary premolars with two roots were selected and shaped with HyFlex EDM instruments to a size 40/0.04 taper and randomly divided into two experimental groups. A total of 14 canals in each group were obturated by two different operators with one HyFlex EDM size 40 gutta-percha point and BioRoot RCS sealer. The specimens were scanned with a high-resolution micro-computed tomography scanner, and the porosity of the fillings at the coronal, middle, and apical thirds of the root canals was qualified and quantified. The differences between groups and root-canal thirds were compared using Mann–Whitney, Friedman, and Wilcoxon tests with the significance level set at p < 0.05. The highest number of pores was observed in the apical third of root-canal fillings in both groups; however, the porosity distribution between the two groups was not significantly different in the apical and middle thirds (p > 0.05). Statistically significant differences were determined only in the coronal third (p < 0.05). The predominance of open pores was detected in all root-canal thirds and groups, with no significant differences in the number of open pores between the coronal and middle thirds (p > 0.05).

Melatonin-doped polymeric nanoparticles reinforce and remineralize radicular dentin: Morpho-histological, chemical and biomechanical studies

OBJECTIVES

To investigate the effectiveness of novel polymeric nanoparticles (NPs) doped with melatonin (ML) in reducing dentin permeability and facilitating dentin remineralization after endodontic treatment.

METHODS

The effect of undoped NPs and ML-doped NPs (ML-NPs) was tested in radicular dentin, at 24 h and 6 m. A control group without NPs was included. ML liberation was measured. Radicular dentin was assessed for fluid filtration. Dentin remineralization was analyzed by scanning electron microscopy, AFM, Young's modulus (Ei), Nano DMA-tan delta, and Raman analysis.

RESULTS

ML release ranged from 1.85 mg/mL at 24 h to 0.033 mg/mL at 28 d. Both undoped NPs and ML-NPs treated dentin exhibited the lowest microleakage, but samples treated with ML-NPs exhibited hermetically sealed dentinal tubules and extended mineral deposits onto dentin. ML-NPs promoted higher and durable Ei, and functional remineralization at root dentin, generating differences between the values of tan delta among groups and creating zones of stress concentration. Undoped-NPs produced closure of some tubules and porosities at the expense of a relative mineral amorphization. Chemical remineralization based on mineral and organic assessments was higher in samples treated with ML-NPs. When using undoped NPs, precipitation of minerals occurred; however, radicular dentin was not mechanically reinforced but weakened over time.

SIGNIFICANCE

Application of ML-NPs in endodontically treated teeth, previous to the canal filling step, is encouraged due to occlusion of dentinal tubules and the reinforcement of the radicular dentin structure.

Microcomputed Tomographic Assessment of the Single Cone Root Canal Fillings Performed by Undergraduate Student, Postgraduate Student and Specialist Endodontist

The present study evaluated the obturation quality of root canals filled with BioRoot RCS sealer and single gutta-percha point by undergraduate student (US), postgraduate student (PS) and endodontist (ED). Twenty-one plastic models of upper premolars were enlarged with HyFlex EDM instruments to a size 40/0.04 taper and randomly divided into three groups (7 teeth/14 canals per group): US, PS and ED. After the obturation of root canals with BioRoot RCS and one HyFlex EDM size 40 gutta-percha point, plastic models were scanned using micro-computed tomography scanner (µCT) SkyScan 1272 at isotropic resolution of 10 µm. The porosity distribution was evaluated separately for the apical, middle and coronal thirds. The Kruskal–Wallis, Mann–Whitney, Friedman and Wilcoxon tests with the significance level set at 5% were used for data analysis. The µCT evaluation revealed open pores being the dominant type of porosity in all experimental groups and root canal thirds, with the highest percentage of pores in the apical third of root canal fillings. The quality and homogeneity of single cone root canals fillings remained similar between the groups in the apical and middle thirds (p > 0.05). Significant differences were observed only in the coronal third (p < 0.05).

The effect of chlorhexidine and dimethyl sulfoxide on long-term sealing ability of two calcium silicate cements in root canal

OBJECTIVES

To evaluate the long-term effect of chlorhexidine (CHX) and dimethyl sulfoxide (DMSO) on the sealing ability and biomineralization of two different calcium silicate cements (CSC) in root canal.

METHODS

Sixty human third molar root canals were obturated with ProRoot MTA or Biodentine. Before obturation the canals were irrigated with saline (control), 2% CHX or 5% DMSO. Microleakage was tested after three days and after six months. After additional six months (12 months after root filling) the roots were cut into 2 mm thick dentine discs. The discs were stored in artificial saliva for one year. The bond strength was measured with the push-out method, and the failure mode was evaluated with a stereomicroscope. The most apical disc of each tooth was used for Vickers hardness test.

RESULTS

No significant differences between the groups was found in initial microleakage. The leakage increased significantly during the 6-month storage in all groups except in Biodentine-CHX group and Biodentine-DMSO group. CHX and DMSO irrigation significantly increased the leakage with ProRoot MTA with time, but there was no statistically significant difference compared to the ProRoot MTA-control group at six months' time point. CHX significantly reduced the push-out bond strength of ProRoot MTA. With Biodentine irrigation with CHX or DMSO resulted with significantly higher push-out strength compared to the Biodentine control group. Fracture analysis showed statistically significant difference in the distribution of the fractures between the groups, but neither CHX nor DMSO change the fracture pattern statistically significantly. With Vickers hardness test ProRoot MTA with and without DMSO as the final irrigant showed significantly higher dentin hardness than any Biodentine-group.

SIGNIFICANCE

Considering that aging increased the leakage in all groups except with Biodentine-DMSO and the differences in the push-out strength and surface microhardness data, it appears that the time-related biomineralizing effect of MTA and Biodentine does not improve sealing to dentin. CHX significantly reduced ProRoot MTA bond strength and increased pure adhesive failures with both cements.

Sealing Ability of AH Plus and GuttaFlow Bioseal

The objective of root canal obturation is to achieve a fluid-tight seal. Recently, GuttaFlow bioseal (GB), a root canal sealer composed of polydimethylsiloxane, gutta-percha particles, and bioactive glass ceramics, has been developed, to enhance the sealing ability of root canal filling material. The objective of this study was to assess the sealing ability of GB using a subnanoliter-scaled fluid-flow measuring device and to compare with that of AH Plus (AH). The fluid flow in root canal-filled teeth using either gutta-percha cone (GP) with AH (GAR; n = 10) or GP with GB (GBR; n = 10) and in GP inserted in AH blocks (GA; n = 10) or GP inserted in GB blocks (GB; n = 10) was measured. In addition, fluid flow in sealer blocks of AH (A; n = 10) and GB (B; n = 10), which served as negative controls, was measured. Root canal-filled teeth using GP without any sealer (GR) acted as positive controls (n = 10). The leakage was obtained by calculating the volume of moved water by time (s), after stabilization of the fluid flow was achieved. Statistical analysis was performed using the Kruskal–Wallis test and Mann–Whitney U-test with Bonferroni correction. A p value less than 0.00238 (0.05/21) was considered significantly different. The mean leakages (nL/s) in the groups are as follows: GAR, 0.0958 ± 0.0543; GBR, 0.0223 ± 0.0246; GA, 0.0644 ± 0.0803; GB, 0.0267 ± 0.0182; A, 0.0055 ± 0.0057; B, 0.0052 ± 0.005; and GR, 0.2892 ± 0.3018. The mean leakage in the GBR group was lower than that in the GAR group (p = 0.001), while the mean leakages in the GA and GB groups were not significantly different. GuttaFlow bioseal can be useful in single-cone obturation technique.

Comparative Evaluation of Physicochemical Properties and Apical Sealing Ability of a Resin Sealer Modified with Pachymic Acid

Objective:

The addition of pachymic acid (PA) to AH Plus (an epoxy resin sealer) offsets the cytotoxicity of the latter. Prior to the clinical implementation of this formulation, a thorough knowledge of its physicochemical properties and sealing ability becomes mandatory. Hence, this in vitro study aimed to characterize and evaluate the physicochemical properties and apical sealing ability of AH Plus (AHP) with and without the addition of PA.

Methods:

Flow, setting time, film thickness, solubility and radiopacity of AHP (group 1) and AHP modified with PA (AHP/PA, group 2) were evaluated in accordance with the guidelines put forth by ISO 6876:2012. The percentage was determined under each parameter. Apical sealing ability was assessed using fluid filtration device. An independent samples t-test was used for inter- and intra-group comparisons of mean fluid flow (MFF).

Results:

Incorporating PA to AHP decreased its flow, setting time and film thickness by 24.34%, 2.14% and 31.71% respectively. The solubility of group 2 increased on day 1 by 85.71% and decreased on days 3, 7 and 14 by 46.67%, 34.79% and 13.8% respectively. The radiopacity of AHP was not altered by the addition of PA. MFF rates of group 2 was significantly higher than group 1 on day 1, but not significantly different on day 7.

Conclusion:

AHP/PA exhibited physicochemical properties that were within the requirements of ISO and with time, and showed fluid flow similar to AHP.

Novel Bioactive and Therapeutic Root Canal Sealers with Antibacterial and Remineralization Properties

According to the American Dental Association Survey of Dental Services Rendered (published in 2007), 15 million root canal treatment procedures are performed annually. Endodontic therapy relies mainly on biomechanical preparation, chemical irrigation and intracanal medicaments which play an important role in eliminating bacteria in the root canal. Furthermore, adequate obturation is essential to confine any residual bacteria within the root canal and deprive them of nutrients. However, numerous studies have shown that complete elimination of bacteria is not achieved due to the complex anatomy of the root canal system. There are several conventional antibiotic materials available in the market for endodontic use. However, the majority of these antibiotics and antiseptics provide short-term antibacterial effects, and they impose a risk of developing antibacterial resistance. The root canal is a dynamic environment, and antibacterial and antibiofilm materials with long-term effects and nonspecific mechanisms of action are highly desirable in such environments. In addition, the application of acidic solutions to the root canal wall can alter the dentin structure, resulting in a weaker and more brittle dentin. Root canal sealers with bioactive properties come in direct contact with the dentin wall and can play a positive role in bacterial elimination and strengthening of the root structure. The new generation of nanostructured, bioactive, antibacterial and remineralizing additives into polymeric resin-based root canal sealers are discussed in this review. The effects of these novel bioactive additives on the physical and sealing properties, as well as their biocompatibility, are all important factors that are presented in this article.

Polymeric nanoparticles for endodontic therapy

The effectiveness of novel polymeric nanoparticles (NPs) application in reducing dentin permeability and facilitating dentin remineralization after endodontic treatment was evaluated. The effect of undoped NPs, zinc, calcium and doxycycline-doped NPs (Zn-NPs, Ca-NPs and D-NPs, respectively) was tested in radicular dentin. A control group without NPs was included. Radicular dentin was assessed for fluid filtration. Dentin remineralization was analyzed by scanning and transmission electron microscopy, energy-dispersive analysis, AFM, Young's modulus (Ei), Nano DMA, Raman, and X-Ray Diffraction analysis. Ca-NPs and Zn-NPs treated dentin exhibited the lowest microleakage with hermetically sealed dentinal tubules and a zinc-based salt generation onto dentin. Zn-NPs favored crystallinity and promoted the highest Ei and functional remineralization at the apical dentin, generating differences between the values of complex modulus among groups. Ca-NPs produced closure of tubules and porosities at the expense of a relative mineral amorphization, without creating zones of stress concentration. The highest sealing efficacy was obtained in Zn-NPs-treated samples, along with the highest values of Young's modulus and dentin mineralization. These high values of Ei were obtained by closing voids, cracks, pores and tubules, and by strengthening the root dentin. When using undoped NPs or Ca-NPs, deposition of minerals occurred, but radicular dentin was not mechanically reinforced. Therefore, application of Zn-NPs in endodontically treated teeth previous to the canal filling is encouraged.

Shear bond strengths of calcium silicate-based sealer to dentin and calcium silicate-impregnated gutta-percha

AIM

To compare the shear bond strengths of a calcium silicate-based root canal sealer (CSS), to dentin or calcium silicate-impregnated gutta-percha (CSGP), with the shear bond strengths of an epoxy resin-based sealer.

METHODS

For sealer/dentin testing, 40 hemisectioned roots were divided into 2 groups. Coronal root dentin discs were bonded with CSS or epoxy resin-based sealer. For sealer/core material testing, CSGP and conventional gutta-percha discs were bonded with a matching sealer (N = 20 per group). The shear bond strengths were tested using a universal testing machine. The failed modes were analyzed using stereomicroscopy and scanning electron microscopy.

RESULTS

The CSS sealer had significantly higher shear bond strength to dentin than did epoxy resin-based sealer (P < .01). However, shear bond strengths of the 2 sealers to core materials did not significantly differ (P = .74). The remnants of the CSS sealer adhering to dentin or calcium silicate gutta-percha disc were observed.

CONCLUSIONS

The CSS sealer had better adhesion to dentin than did epoxy resin-based sealer. However, the bond of the CSS sealer to impregnated gutta-percha was not superior to the epoxy resin-based sealer bonded to conventional gutta-percha.

The push out bond strength of polydimethylsiloxane endodontic sealers to dentin

Background

The purpose of this experiment was to assess the push out bond strength of Polydimethylsiloxane sealers (GuttaFlow 2 and GuttaFlow Bioseal by Colte’ne/Whaledent, Altstätten, Switzerland). AH Plus (Dentsply, DeTrey, Konstanz, Germany) was used as a reference material for comparison.

Methods

Thirty root slices were prepared from the middle third of 10 mandibular premolars. Each slice was 1 ± 0.1 mm thick. Three holes, 0.8 mm wide each, were drilled on the axial side of each root slice. These holes were subjected to standardized irrigations and then dried using paper points. Finally, for each root slice, each hole was filled with exactly one of the following three root canal sealers: AH Plus, GuttaFlow 2 and GuttaFlow Bioseal. After all the holes were filled in that way, the root slices were stored on top of phosphate-buffered saline solution (pH 7.2) soaked gauze for 7 days at the temperature of 37 degrees Celsius. Then, for each root canal sealer on a root slice, the universal testing machine was used to measure the push out bond strength. The differences in push out bond strengths between the three sealer samples were assessed using the Friedman test, while the paired comparisons were assessed using Wilcoxon signed rank test with Bonferroni correction. All statistical tests were two-tailed and the significance level was set at the 5%.

Results

According to the Friedman test the distributions of push out bond strengths of AH Plus, GuttaFlow 2 and GuttaFlow Bioseal were different (P < 0.05). Paired comparisons indicated that AH Plus had a significantly superior push out bond strength than GuttaFlow 2 and GuttaFlow Bioseal, while the push out bond strength of GuttaFlow Bioseal was significantly stronger than that of GuttaFlow 2 (P < 0.01).

Conclusions

Based on these findings, AH Plus is a better root canal sealer than GuttaFlow 2 and GuttaFlow Bioseal.

Biocompatibility and Mineralization Activity of Three Calcium Silicate-Based Root Canal Sealers Compared to Conventional Resin-Based Sealer in Human Dental Pulp Stem Cells

The purpose of this study was to compare the cytotoxic effects and mineralization activity of three calcium silicate-based root canal sealers to those of a conventional resin-based sealer. Experiments were performed using human dental pulp stem cells grown in a monolayer culture. The root canal sealers tested in this study were EndoSequence BC Sealer (Brasseler), BioRoot RCS (Septodont), Endoseal MTA (Maruchi), and AH Plus (Dentsply DeTrey). Experimental disks 6 mm in diameter and 3 mm in height were made and stored in a 100% humidity chamber at 37 °C for 72 h to achieve setting. The cytotoxicity of various root canal sealers was evaluated using a methyl-thiazoldiphenyl-tetrazolium (MTT) assay. To evaluate cell migration ability, a scratch wound healing method was used, and images of the scratch area were taken using a phase-contrast microscope. Cell morphology was evaluated by a scanning electron microscope after direct exposure for 72 h to each sealer disk. In the cell viability assay, there were no significant differences between the EndoSequence BC, BioRoot RCS, Endoseal MTA, and control groups in any experimental period (p > 0.05). In the cell migration assay, there were no significant differences between the EndoSequence BC, Endoseal MTA, and control groups in any experimental period (p > 0.05). BioRoot RCS exhibited slower cell migration relative to EndoSequence BC and Endoseal MTA for up to 72 h (p < 0.05). Conversely, it showed a similar wound healing percentage at 96 h (p > 0.05). In an evaluation of cell morphology, cells in direct contact with EndoSequence BC, BioRoot RCS, and Endoseal MTA disks showed superior spreading compared to those in contact with the AH Plus disk. In an Alizarin red staining assay, EndoSequence BC, BioRoot RCS, and Endoseal MTA showed a significant increase in mineralized nodule formation compared to the AH Plus group (p < 0.05). In conclusion, all calcium silicate-based root canal sealers tested in this study showed good biological properties and mineralization activity compared to conventional resin-based sealer.

Comparative evaluation of apical sealing ability of different root canal sealers

Purpose

The aim of this study was to compare the short and long term apical sealing ability of different root canal sealers.

Materials and methods

Fifty-five extracted human anterior single-root teeth were used. The coronal part of each tooth was removed and the root canals were prepared with NiTi rotary instruments. Teeth were divided into 5 study groups; Group I: MTA Fillapex (Angelus, Brazil); Group II: Sealapex (Sybron-Kerr, Romulus, MI, USA) and Group III: AH Plus (Dentsply, Konstanz, Germany) (n=15) and negative and positive control groups (n=5). The quality of root canal sealing was assessed by a fluid filtration method performed at 24 h and 180-day time intervals. Kruskal Wallis and Mann Whitney U tests were used to compare the groups.

Results

At 24 h evaluation, MTA Fillapex presented significantly less microleakage than the Sealapex and AH Plus (p<0.05). At long term interval (180-day), Sealapex and AH Plus presented significantly less microleakage than the MTA Fillapex (p<0.05).

Conclusion

Sealapex and AH Plus showed significantly better sealing abilities than MTA Fillapex in the long term.

The Penetration Ability of Calcium Silicate Root Canal Sealers into Dentinal Tubules Compared to Conventional Resin-Based Sealer: A Confocal Laser Scanning Microscopy Study

The purpose of this study was to compare the penetration ability of calcium silicate root canal sealers and conventional resin-based sealer using confocal laser scanning microscopy (CLSM). A total of 60 recently extracted single-rooted human premolars were used in this study. The root canals were prepared to a size 40/0.06 taper with ProFile rotary instruments and irrigated with NaOCl and EDTA. After drying all canals, the specimens were randomly divided into three experimental groups (n = 20): Group 1, gutta-percha (GP)/AH Plus with continuous wave compaction; group 2, GP/BioRoot RCS with a single-cone technique; and group 3, GP/Endoseal MTA with a single-cone technique. All experimental samples were sectioned perpendicular to their long axis using a low-speed diamond wheel at the apical, middle, and coronal third levels. The penetration abilities of all samples were evaluated using CLSM. A Kruskal⁻Wallis analysis and a series of Mann⁻Whitney U post hoc tests were performed. A higher intensity level was found in the coronal area and a lower intensity level in the apical area in all the experimental groups. The AH Plus group showed higher sum fluorescence intensity in the apical and coronal thirds compared with the BioRoot RCS and Endoseal MTA groups, whereas the BioRoot RCS group showed a higher intensity level in the middle third, similar to the AH Plus group. The maximum sealer penetration depth was low in the apical area and high in the coronal area in the AH Plus and Endoseal MTA groups. In the BioRoot RCS group, maximum sealer penetration was observed in the middle third. In conclusion, there were significant differences in sealer penetration pattern and distance according to the root level and sealer type.

The Effect of Chlorhexidine and Dimethyl Sulfoxide on Long-Term Microleakage of Two Different Sealers in Root Canals

Objective

The aim of root canal obturation is to prevent leakage and inhibit microbial invasion. This study aimed to determine the effect of chlorhexidine (CHX) and dimethyl sulfoxide (DMSO) as final irrigants on microleakage of root filling immediately and after 18 months. The hypothesis was that either CHX or DMSO would not affect the immediate or long-term microleakage.

Methods

A total of 120 human third molar root canals were obturated with RealSeal SE or Topseal and gutta percha. Before obturation, the canals were irrigated with saline (control), 2% CHX or 5% DMSO. Microleakage of half of each groups (n=10) was measured after 3 days, and of the other half was measured after 18 months with fluid filtration method.

Results

In immediate measurements, RealSeal SE performed significantly better in CHX-irrigated group (p=0.035; Mann-Whitney test). For both sealers, DMSO had the lowest mean microleakage values, which were also statistically significantly lower than with CHX irrigation within sealers (p<0.009 for Topseal and p=0.04 for RealSeal SE; Mann-Whitney test). With RealSeal SE, the microleakage with CHX was significantly higher than that in controls (p=0.022; Mann-Whitney test).

Conclusion

Neither final irrigant showed statistically significant differences in the immediate microleakage within the two sealers. Irrigation with DMSO caused significantly less microleakage than CHX for both sealers after 18 months.

Comparison of push-out bond strength of three different obturating systems to intraradicular dentin: An In vitro study

Background:

To increase the push-out bond strength of endodontic materials, newer obturation materials and obturation techniques are being introduced.

Aim:

The present study aimed to evaluate the push-out bond strength of three different obturating materials using a universal testing machine (UTM).

Materials and Methods:

A total of thirty freshly extracted maxillary anterior teeth were collected and randomly divided into three groups of ten each. Biomechanical preparation was done in all the teeth, and they were then divided into three experimental groups according to the obturation material and technique used, as follows: Group I: gutta-percha (GP) with AH Plus root canal sealer (lateral condensation); Group II: thermoplasticized GP technique – noncarrier based (CALAMUS^®) with AH Plus sealer (backfill); and Group III: C-points (self-sealing root canal obturating system) with bioceramic sealer (single cone). Each specimen was subjected to push-out test using the UTM, where the punch moved in an apical to coronal direction at a crosshead speed of 0.5 mm/min, which resulted in the displacement of the filling material. The depth of dye penetration was examined under a stereomicroscope at ×30 magnification.

Results:

All the analyses were performed using SPSS software version 16. P < 0.05 was considered statistically significant. Comparisons of mean values were done using ANOVA with post hoc Games–Howell test and ANOVA with post hoc Tukey's test. Group III demonstrated the highest mean push-out bond strength and Group I exhibited the least bond strength. A statistically significant difference was found between Group III and Group I with regard to the push-out bond strength assessment.

Conclusion:

Push-out bond strength differs among different obturation materials and obturation techniques.

The effect of smear layer removal on E. faecalis leakage and bond strength of four resin-based root canal sealers

BACKGROUND

The aim of the study was to assess bacterial sealability and bonding ability of methacrylate-based Resilon (RS, SybronEndo), Endo Rez (ER, Ultradent Products Inc), and epoxy-based AH Plus (AH, Dentsply/DeTrey), MTA Fill Apex (MTAF, Angelus Soluções Odontológicas) root canal sealers, and the effect of the smear layer removal on the sealability.

METHODS

One hundred thirty root segments were instrumented up to apical size #60 and rinsed with 2.5% NaOCl. Half of the roots were rinsed with 5ml 17% EDTA to remove the smear layer. All the roots were filled with AH, ER, MTAF sealers and gutta-percha, or RS with Resilon cones. After storage at 37°C for 7 days the samples were mounted into bacterial leakage assay for 50 days. Another 100 roots were instrumented and rinsed as described above, split longitudinally, cut into the cervical, middle and apical parts. The sealers were injected through the plastic mould on the dentin surface. After 7 days of incubation at 37°C, bond strength was tested using a notched-edge test fixture (Crosshead, Ultradent Products Inc.) and a universal testing machine (Lloyd Instruments).

RESULTS

AH revealed the longest mean time for bacterial resistance by 29.4 and 36.8 days (with and without smear layer, respectively) followed by RS (15.1 and 24.7 days, respectively). The difference between materials was significant (p<0.001). Bond strength values ranged from 0.2± 0.1 to 3.5± 0.7 MPa and increased from the apical to the cervical third. In the apical third, AH showed the highest mean (SD) bond values 1.4 (0.4) MPa and 1.7 (0.6) MPa (with and without smear, respectively, followed by RS, 0.5 (0.1) MPa and 0.8 (0.1) MPa, respectively. The difference between materials was significant (p=0.001).

CONCLUSION

The effect of the smear layer removal on the sealability was material-dependent.

Influence of ultrasonics on the penetration depth of AH plus, acroseal, and EndoREZ root canal sealers: An in vitro study

Aim

The aim of this study is to evaluate the effect of ultrasonic activation on the penetration depth of AH Plus, Acroseal, and EndoREZ sealers into dentinal tubules using Confocal laser microscopy.

Methods

A total of 60 single-rooted teeth were prepared and divided into three groups on the basis of the type of sealer used (G1: AH Plus, G2: Acroseal and G3:EndoREZ). Each group was further subdivided into two equal subgroups on the basis of ultrasonic activation of sealers and nonactivation. Teeth were obturated and coronally sealed with GIC. Horizontal sections at 2 mm, 4 mm, and 6 mm from the apex were obtained, and the depth of sealer penetration into the dentinal tubules was measured using confocal laser scanning microscopy. Statistical analysis was performed using Students unpaired t-test, ANOVA, and Tukey's multiple comparison test.

Results

Within the three groups, ultrasonically activated subgroups showed significantly (P < 0.05) higher depth of sealer penetration. Among the groups, Group 1 showed significantly (P < 0.05) higher depth of sealer penetration than Group 2 and Group 3 while the difference between Group 2 and Group 3 was not significant (P > 0.05).

Conclusion

The use of ultrasonic activation with AH Plus sealer showed better results.

Novel Calcium Zirconate Silicate Cement Biomineralize and Seal Root Canals

This study evaluated the sealing ability of gutta-percha (GP) with a calcium silicate-based sealer and a novel calcium zirconate containing calcium silicate cement (ZC). The root canals of the extracted premolars were prepared, which were then randomly allocated to three experimental groups (12 root canals per group) for obturation by continuous wave of condensation with the GP and AH 26 sealer (CW); obturation using a single GP with a calcium silicate-based EndoSequence BC sealer (SC); or obturation with ZC. The roots were inserted into sterile Eppendorf tubes, which were inoculated coronally with Porphyromonas gingivalis. The amount of endotoxin leakage into the apical reservoirs were measured using the Limulus Amebocyte Lysate (LAL) assay over 21 days, with comparisons made using one-way ANOVA and Scheffe’s tests (α = 0.05). After 21 days, 75% of the canals that had been obturated by SC, 50% of those obturated by CW and 42% of those obturated by ZC showed endotoxin leakage. The amount of leakage was higher in the SC canals than in the CW (p = 0.031) or ZC (p = 0.03) canals, although there was no significant difference in the amount of leakage for CW and ZC (p > 0.05). X-ray diffraction revealed the presence of tricalcium silicate (Ca₃SiO₅) and calcium zirconate (CaZrO₃) in the synthesized ZC. Scanning electron microscopy revealed mineralized precipitates on the dentin of canals obturated by ZC. The novel calcium zirconate silicate cement appears to promote biomineralization and seal root canals at least as effectively as the conventional sealer.

Effect of photodynamic therapy and non-thermal plasma on root canal filling: analysis of adhesion and sealer penetration

Objective

The aim of this study was to evaluate the effect of photodynamic therapy (PDT) and non-thermal plasma (NTP) on adhesion and sealer penetration in root canals.

Material and Methods

Sixty single-rooted premolars were used. The teeth were prepared using a crown-down technique. NaOCl and EDTA were used for irrigation and smear layer removal, respectively. The root canals were divided into three groups: control, PDT, and NTP. After treatments, the roots were filled using gutta-percha and either AH Plus (AHP) or MTA Fillapex (MTAF) sealers. Samples were sectioned at 4, 8, and 12 mm from the apex (1-mm slices)and analyzed by the push-out bond strength test (adhesion) and confocal laser scanning microscopy (sealer penetration). Data were statistically evaluated using Kruskal-Wallis, Dunn’s, and Spearman’s tests.

Results

Regarding AHP, bond strength was similar in the NTP group and in the control group, but significantly lower in the PDT group. As to MTAF, both therapies showed lower values than the control group. In the confocal analysis of AHP, maximum and mean penetration, and penetrated area were statistically higher in the control group than in the PDT and NTP groups. Penetrated perimeter was similar among groups. Regarding MTAF, all parameters yielded better results in the NTP than in the control group. The PDT and control groups showed similar results except for penetrated area.

Conclusion

PDT and plasma therapy affected the adhesion and sealer penetration of root canals filled with AH Plus and MTA Fillapex and there is no positive correlation between adhesion and sealer penetration.

Comparative evaluation of the apical sealing ability of a ceramic based sealer and MTA as root-end filling materials - An in-vitro study

Background

The present study was aimed to evaluate and compare the apical sealing ability of two endodontic root-end filling materials namely, iRoot SP (ceramic based) and ProRoot MTA using the bacterial leakage system.

Material and Methods

A total of fifty recently extracted, single rooted teeth with a single straight canal were selected for the study. The teeth were chemo mechanically prepared. The apical 3mm of the root was resected and root end cavities were prepared. The teeth were randomly divided into two groups of twenty teeth each for the experimental root end filling materials namely, iRoot SP and ProRoot MTA. A two-chamber model was constructed using pippeter tips and plastic vials. The pipetter tips with the teeth were suspended in these caps and the entire assembly was reattached to the vial. The upper chamber was seeded withEnterococcus faecalis. An Enterococci-selective broth was used in the lower chamber. Leakage was assessed for 90 days and compared using survival statistics.

Results

The ProRoot MTA filled root end samples leaked within 30-72 days. The iRoot SP filled root end samples leaked within 51-69 days.

Conclusions

Under the parameters of this study, it can be concluded that all the tested materials showed significant apical sealing ability as root-end filling materials over a period of 90 days. iRoot SP exhibited the most effective apical sealing ability as compared to ProRoot MTA.

Key words:Apical sealing ability, Bacterial leakage, iRoot SP, ProRoot MTA, Root-end filling.

Stereomicroscopic Dye Leakage Measurement of Six Different Root Canal Sealers

INTRODUCTION

Hermetic sealing of the root canal is the most desirable outcome of any root canal treatment, but almost always the filling of the root canal is defective, which is a multifactorial outcome. One such factor majorly influencing the obturation is the root canal sealer used.

AIM

The present study was done for evaluating microleakage in different root canal sealers.

MATERIALS AND METHODS

Sixty extracted human single rooted teeeth were used in this in-vitro study. Sealers tested for microleakage in this study were zinc oxide eugenol based sealer, Sealapex, AH Plus, MTA Plus, EndoRez, Endosequence BC. All the specimens were examined under stereomicroscope for microleakage and the obtained data were statistically analysed using One-way ANOVA test and Tukey's multiple comparision tests using the software GraphPad Prism 7.02.

RESULTS

The Endosequence BC group showed the least dye leakage and the highest leakage was seen in Zinc oxide Eugenol based sealer.

CONCLUSION

Bio ceramic salers being hydrophilic show better sealing ability compared to resin based and eugenol based sealers.

Evaluation of bond strength of various epoxy resin based sealers in oval shaped root canals

Background

The aim of this study was to evaluate the bond strength of AH plus, Acroseal, and Adseal to the root canal dentin.

Methods

A total of 36 single-rooted, mandibular premolar teeth were used. Root canal shaping procedures were performed with ProTaper rotary instruments (Dentsply Maillefer) up to size F4. The prepared samples were then randomly assembled into 3 groups (n = 12). For each group, an ultrasonic tip (size 15, 0.02 taper) which was also coated with an epoxy resin based sealer and placed 2 mm shorter than the working length. The sealer was then activated for 10 s. A push-out test was used to measure the bond strength between the root canal dentine and the sealer. Kruskal-Wallis test to evaluate the push-out bond strength of epoxy based sealer (P = 0.05). The failure mode data were statistically analyzed using Pearson’s chi square test (P = 0.05).

Results

Kruskal-Wallis test indicated that there were no statistically significant difference among the push out bond strength values of 3 mm (p = 0.123) and 6 mm (P = 0.057) for groups, there was statistically significant difference push out bond strength value of 9 mm (P = 0.032). Pearson’s chi square test showed statistically significant differences for the failure types among the groups.

Conclusion

Various epoxy resin based sealers activated ultrasonically showed similar bond strength in oval shaped root canals. Apical sections for all groups have higher push out bond strength values than middle and coronal sections.

Electronic supplementary material

The online version of this article (doi:10.1186/s12903-016-0301-1) contains supplementary material, which is available to authorized users.

A comparison of apical sealing ability between GuttaFlow and AH plus: An in vitro study

Aims:

The present study aimed to compare apical sealing ability between GuttaFlow and AH Plus.

Materials and Method:

Eighty extracted human maxillary anterior teeth with fully formed apex and straight root were collected for this study. The root canals were cleaned and shaped using a standard step back preparation to size 60# master apical file at the established working length and divided into four groups: Group 1, GuttaFlow sealer with gutta-percha; Group 2, AH Plus sealer with gutta-percha; Group 3, positive control group (Teeth were instrumented and left without obturation); Group 4, negative control group (Teeth were totally coated with nail varnish) Dye leakage was carried out. Statistical analysis was done using the Statistical Package for the Social Sciences software and Student's unpaired t-test.

Results:

The GuttaFlow group had a mean leakage of 1.38 mm whereas AH Plus had a mean of 1.425 mm. The standard deviation of GuttaFlow and AH Plus were 0.3861 and 0.3226, respectively. Student's unpaired t-test disclosed no significant difference (P < 0.05) between the groups.

Conclusion:

None of the sealers used in the study could completely seal the apical foramen to have a fluid-tight seal. GuttaFlow and AH Plus showed no statistically significant difference in microleakage; the better result was shown by GuttaFlow.

In vitro evaluation of a newly produced resin-based endodontic sealer

OBJECTIVES

A variety of root canal sealers were recently launched to the market. This study evaluated physicochemical properties, biocompatibility, and sealing ability of a newly launched resin-based sealer (Dia-Proseal, Diadent) compared to the existing root canal sealers (AHplus, Dentsply DeTrey and ADseal, Metabiomed).

MATERIALS AND METHODS

The physicochemical properties of the tested sealers including pH, solubility, dimensional change, and radiopacity were evaluated. Biocompatibility was measured using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. For microleakage test, single-rooted teeth were instrumented, and obturated with gutta-percha and one of the sealers (n = 10). After immersion in 1% methylene blue solution for 2 weeks, the specimens were split longitudinally. Then, the maximum length of staining was measured. Statistical analysis was performed by one-way analysis of variance followed by Tukey test (p = 0.05).

RESULTS

Dia-Proseal showed the highest pH value among the tested sealers (p < 0.05). ADseal showed higher dimensional change compared to AHplus and Dia-Proseal (p < 0.05). The solubility values of AHplus and Dia-Proseal were similar, whereas ADseal had the lowest solubility value (p < 0.05). The flow values of sealer in increasing order were AHplus, DiaProseal, and ADseal (p < 0.05). The radiopacity of AHplus was higher than those of ADseal and Dia-Proseal (p < 0.05). The cell viability of the tested materials was statistically similar throughout the experimental period. There were no significant differences in microleakage values among the tested samples.

CONCLUSIONS

The present study indicates that Dia-Proseal has acceptable physicochemical properties, biocompatibility, and sealing ability.

Ability of Three Endodontic Sealers to Fill the Root Canal System in Association with Gutta-Percha

Introduction:

The present study compared the ability of the endodontic sealers AH Plus, Pulp Canal Sealer and EndoREZ to fill the root canal system in association with gutta-percha.

Methods:

Ninety mandibular premolars were accessed, prepared and divided into three groups of 30 teeth each, according to the sealer used to fill the canals: AH Plus, Pulp Canal Sealer and EndoREZ. All the teeth were filled using the continuous wave of condensation technique. The specimens were then decalcified, dehydrated, rendered transparent, and analyzed by three independent evaluators with 8x magnification. Chi-squared test (χ², p < 0.05) was used to compare the groups in relation to the totally filled, the partially filled and the non filled ramifications. The same test was used to compare the directions of filled ramifications and the number of ramifications among the three thirds of the roots.

Results:

EndoREZ filled a significantly higher number of ramifications than AH Plus and Pulp Canal Sealer (χ², p < 0.05). All the groups showed higher number of totally filled ramifications than partially filled and unfilled ramifications. The ramifications were more frequently detected in the apical third, followed by medium and coronal thirds, respectively (χ², p < 0.05). The ramifications were more frequently detected towards lingual direction (χ², p < 0.05).

Conclusion:

EndoREZ presented higher ability to fill the root canal system in association with gutta-percha when compared to AH Plus and Pulp Canal Sealer. The ramifications were more frequently detected in the apical third, running in a lingual direction.

Thermocompaction decreases long-term push-out bond strength of methacrylate-based sealers

PURPOSE

The purpose of this study was to evaluate the immediate and long-term bond strengths to root dentin of Epiphany/Resilon and AH Plus/gutta-percha fillings, after using either lateral condensation or Tagger's hybrid thermomechanical compaction techniques.

MATERIALS AND METHODS

Eighty human single-rooted teeth were used. The root canals were prepared by means of hand crown-down technique up to a #45 K-file and irrigation with 1% sodium hypochlorite was performed. Samples were randomly divided into eight (n=10) experimental groups divided according to filling material (gutta-percha/AH Plus and Resilon/Epiphany), obturation technique (Lateral compaction and Tagger's hybrid thermomechanical compaction) and storage time (24 h and 6 months). During storage, the samples were kept at 37°C and 100% humidity. After the two experimental periods, each root was sectioned perpendicular to its long axis into three serial slices and push-out tests were carried out using a universal testing machine. Statistical significant differences were set by ANOVA and Tuckey post-hoc (p<0.05).

RESULTS

Using thermocompaction technique, the samples filled with Epiphany/Resilon decreased significantly the bond strength after a 6 months storage-period (p<0.05) and the ones filled with AH Plus/gutta-percha presented a tendency to lower values of the push-out test, although not statistically significant. For both materials, dentin bond strength of the specimens filled by means of lateral condensation remained stable throughout the experimental periods.

CONCLUSION

Under the limitations of the current study, it can be concluded that the thermocompaction technique and the storage time can influence push-out bond strength when used with methacrylate-based sealers.

Influence of pH change and water storage on the sealing ability of two resin-based root-filling materials

AIM

To evaluate the Influence of pH change and water storage up to 90 days on the sealing ability of two resin-based root-filling materials.

MATERIALS AND METHODS

Forty-four human mandibular single-rooted teeth were instrumented and filled with gutta-percha/ AH Plus or Resilon/Epiphany SE (n=20 per group). Two teeth each were used as positive and negative controls. Specimens were set for 7 days under 100% humidity at 37°C. They were allocated into two subgroups (n=10) according to whether they were tested immediately or stored for up to 90 days in water before testing. Sealing ability was evaluated by passive dye penetration. Absorbance at 630 nm (in μg/ml) was measured by spectrophotometry. The pH values were obtained in triplicate. Data were submitted to ANOVA by post-hoc Tukey's test (α=0.05).

RESULTS

Specimens filled with Resilon/Epiphany SE exhibited more leakage than specimens filled with gutta-percha/AH Plus at the immediate time point (p<0.001). No differences were detected between the groups after storage, or between the materials with pH changes after 30, 60 and 90 days (p>0.05).

CONCLUSION

Gutta-percha/AH Plus provided superior sealing at the immediate time point. Water storage and pH changes did not Influence the sealing ability of tested materials.

CLINICAL SIGNIFICANCE

These results suggest that Resilon/ Epiphany SE sealer offered no apparent advantage over the more conventional gutta-percha/AH Plus sealer technique in terms of sealing ability.