The Excited-State N-H Tautomerization Rate in Free-Base Corroles

Corrole is a tetrapyrrolic dye with a structure that resembles porphyrin, apart from a single missing carbon. The absence of this carbon results in the re-arrangement of the double bonds within the macrocycle, and the presence of three pyrrolic protons in the central cavity in its free-base form. These protons lead to the existence of two distinct tautomeric structures that exist in a dynamic equilibrium. Although the ground-state energies of the tautomers are similar, the excited states show a significant difference in energy which unbalances the equilibrium between the tautomers and results in rapid excited-state tautomerization, favouring one tautomeric species over the other. Although the excited-state tautomerization process has been known for a long time, very few studies have been performed on it, leaving many key aspects of the process poorly understood. Herein we show how ultrafast photoluminescence can be used to experimentally determine the rates of excited-state tautomerization and activation energies of three free-base corrole derivatives thus allowing us to completely describe the excited-state dynamics of the unusual excited state of free-base corrole and opening the door to the development of new materials that can exploit its unique characteristics.

Conformational and Substitution Effects on the Donor and Reducing Strength of Tin(II) Porphyrinogens

Meso-octaalkylcalix[4]pyrrolates are a class of redox-active porphyrinogen ligands. They have been well established in d- and f-block chemistry for over three decades but have only recently been introduced as ligands for p-block elements. Here, we present a study on the influence of meso-substituents on the redox chemistry of calix[4]pyrrolato stannate(II) dianions [2R]2- (R=Me, Et). Expansion of the normal-mode structural decomposition (NSD) method, well known for porphyrin chemistry, provides insights into the ligand conformation of a calix[4]pyrrolato p-block complex. Combined with the results of spectroscopic donor scaling, electrochemical studies, and quantum mechanical bond analysis tools, subtle but significant substitution and conformational effects on the electronic structure are revealed. Exploiting this knowledge rationalizes the role of this class of tin(II) dianions to act as potent reducing agents, but can also be expanded for other central elements. Photoexcitation boosts this reactivity further, allowing for the reduction of even challenging chlorobenzene.

The mutual lipid-mediated effect of the transmembrane domain of SARS-CoV-2 E-protein and glycyrrhizin nicotinate derivatives on the localization in the lipid bilayer

Glycyrrhizinic acid (GA) is one of the active substances in licorice root. It exhibits antiviral activity against various enveloped viruses, for example, SARS-CoV-2. GA derivatives are promising biologically active compounds from perspective of developing broad-spectrum antiviral agents. Given that GA nicotinate derivatives (Glycyvir) demonstrate activity against various DNA- and RNA-viruses, a search for a possible mechanism of action of these compounds is required. In the present paper, the interaction of Glycyvir with the transmembrane domain of the SARS-CoV-2 E-protein (ETM) in a model lipid membrane was investigated by NMR spectroscopy and molecular dynamics simulation. The lipid-mediated influence on localization of the SARS-CoV-2 E-protein by Glycyvir was observed. The presence of Glycyvir leads to deeper immersion of the ETM in lipid bilayer. Taking into account that E-protein plays a significant role in virus production and takes part in virion assembly and budding, the data on the effect of potential antiviral agents on ETM localization and structure in the lipid environment may provide a basis for further studies of potential coronavirus E-protein inhibitors.

First Examples of s-Metal Complexes with Subporphyrazine and Its Phenylene-Annulated Derivatives: DFT Calculations

Using quantum chemical calculation data obtained by the DFT method with the B3PW91/TZVP and M062X/def2TZVP theory levels, the possibility of the existence of four Be(II) coordination compounds, each of which contains in the inner coordination sphere and the double deprotonated forms of subporphyrazine (H2SP), mono[benzo]subporphyrazine (H2MBSP), di[benzo]subporphyrazine (H2DBSP), and tri[benzo]subporphyrazine (subphthalocyanine) (H2TBSP) with a ratio Be(II) ion/ligand = 1:1, were examined Selected geometric parameters of the molecular structures of these (666)macrotricyclic complexes with closed contours are given; it was noted that BeN3 chelate nodes have a trigonal-pyramidal structure and exhibit a very significant (almost 30°) deviation from coplanarity; however, all three 6-membered metal-chelate and three 5-membered non-chelate rings in each of these compounds are practically planar and deviate from coplanarity by no more than 2.5°. The bond angles between two nitrogen atoms and a Be atom are equal to 60° (in the [BeSP] and [BeTBSP]) or less by no more than 0.5° (in the [BeMBSP] and [BeDBSP]). The presence of annulated benzo groups has little effect on the parameters of the molecular structures of these complexes. Good agreement between the structural data obtained using the above two versions of the DFT method was noticed. NBO analysis data for these complexes are presented; it was noted that, according to both DFT methods used, the ground state of the each of complexes under study is a spin singlet. Standard thermodynamic parameters of formation (standard enthalpy ΔfH0, entropy S0, and Gibbs free energy ΔfG0) for the above-mentioned macrocyclic compounds were calculated.

Electrosynthesis of Verdoheme and Biliverdin Derivatives Following Enzymatic Pathways

Artificial syntheses of biologically active molecules have been fruitful in many bioinspired catalysis applications. Specifically, verdoheme and biliverdin, bearing polypyrrole frameworks, have inspired catalyst designs to address energy and environmental challenges. Despite remarkable progress in benchtop synthesis of verdoheme and biliverdin derivatives, all reported syntheses, starting from metalloporphyrins or inaccessible biliverdin precursors, require multiple steps to achieve the final desired products. Additionally, such synthetic procedures use multiple reactants/redox agents and involve multistep purification/extraction processes that often lower the yield. However, in a single step using atmospheric oxygen, heme oxygenases selectively generate verdoheme or biliverdin from heme. Motivated by such enzymatic pathways, we report a single-step electrosynthesis of verdoheme or biliverdin derivatives from their corresponding meso-aryl-substituted metalloporphyrin precursors. Our electrosynthetic methods have produced a copper-coordinating verdoheme analog in >80% yield at an applied potential of 0.65 V vs ferrocene/ferrocenium in air-exposed acetonitrile solution with a suitable electrolyte. These electrosynthetic routes reached a maximum product yield within 8 h of electrolysis at room temperature. The major products of verdoheme and biliverdin derivatives were isolated, purified, and characterized using electrospray mass spectrometry, absorption spectroscopy, cyclic voltammetry, and nuclear magnetic resonance spectroscopy techniques. Furthermore, X-ray crystallographic data were collected for select cobalt (Co)- and Cu-chelating verdoheme and metal-free biliverdin products. Electrosynthesis routes for the selective modification at the macrocycle ring in a single step are not known yet, and therefore, we believe that this report would advance the scopes of electrosynthesis strategies.

Porphyrin-based covalent organic frameworks from design, synthesis to biological applications

Covalent organic frameworks (COFs) constitute a class of highly functional porous materials composed of lightweight elements interconnected by covalent bonds, characterized by structural order, high crystallinity, and large specific surface area. The integration of naturally occurring porphyrin molecules, renowned for their inherent rigidity and conjugate planarity, as building blocks in COFs has garnered significant attention. This strategic incorporation addresses the limitations associated with free-standing porphyrins, resulting in the creation of well-organized porous crystal structures with molecular-level directional arrangements. The unique optical, electrical, and biochemical properties inherent to porphyrin molecules endow these COFs with diversified applications, particularly in the realm of biology. This review comprehensively explores the synthesis and modulation strategies employed in the development of porphyrin-based COFs and delves into their multifaceted applications in biological contexts. A chronological depiction of the evolution from design to application is presented, accompanied by an analysis of the existing challenges. Furthermore, this review offers directional guidance for the structural design of porphyrin-based COFs and underscores their promising prospects in the field of biology.

Unexpected Supramolecular-Induced Redox Switching in Sandwich Gd Bisphthalocyaninate

The redox state of the phthalocyanine in sandwich lanthanide complexes is crucial for their applications. In this work, we demonstrate that the cation-induced supramolecular assembly of crown-substituted phthalocyanine lanthanide complexes Ln[(15C5)4Pc]2 can be used to control the redox state of the ligand simultaneously with the coordination sphere of the central metal. We achieve unprecedented redox switching of phthalocyanine ligands in a double-decker Gd(III) complex, resulting from the intramolecular inclusion of potassium cations between the decks with simultaneous twisting of the ligands (the skew angle between them decreases from 44.61 to 0.21°). Such a structural change leads to an increase in the deck-to-deck distance and drastically facilitates ligand reduction. This process was shown to be anion-dependent: only potassium salts of weak acids (KOPiv and KOAc) induce intramolecular inclusion of cations with redox switching in contrast to salts of strong acids (KBr, KOPic, KSCN, and KPF6), where such a redox process does not occur. This breakthrough opens new avenues for controlling the electrochromic properties, of phthalocyanines, along with other properties, such as electrical conductivity, optics, etc.

Phosphonate-substituted porphyrins as efficient, cost-effective and reusable photocatalysts

Recent advances in visible light photocatalysis represent a significant stride towards sustainable catalytic chemistry. However, its successful implementation in fine chemical production remains challenging and requires careful optimization of available photocatalysts. Our work aims to structurally modify bioinspired porphyrin catalysts, addressing issues related to their laborious synthesis and low solubility, with the goal of increasing their efficiency and developing reusable catalytic systems. We have demonstrated the catalytic potential of readily available meso-tetrakis[4-(diethoxyphosphoryl)phenyl]porphyrins (M(TPPP)). Novel metal (Pd(II), Co(II) and In(III)) complexes with this ligand were prepared in good yields. These chromophores were characterized in solution using spectroscopic (NMR, UV-vis, fluorescence) and electrochemical methods. The introduction of phosphonate groups on the phenyl substituents of meso-tetraphenylporphyrins (M(TPP)) improves solubility in polar organic solvents without significantly altering the photophysical properties and photostability of complexes. This structural modification also leads to easier reductions and harder oxidations of the macrocycle for all investigated complexes compared to the corresponding TPP derivatives. The free base porphyrin, zinc(II), palladium(II), and indium(III) complexes were studied as photocatalysts for oxidation of sulfides to sulfoxides using molecular oxygen as a terminal oxidant. Both dialkyl and alkyl aryl sulfides were quantitatively transformed into sulfoxides under blue LED irradiation in the acetonitrile-water mixture (10 : 1 v/v) with a low loading (0.005-0.05 mol%) of porphyrin photocatalysts, where H2(TPPP) and Pd(TPPP) were found to be the most efficient. The reaction mechanism was studied using photoluminescence and EPR spectroscopies. Then, to access reusable catalysts, water-soluble derivatives bearing phosphonic acid groups, H2(TPPP-A) and Pd(TPPP-A), were prepared in high yields. These compounds were characterized using spectroscopic methods. Single-crystal X-ray diffraction analysis of Pd(TPPP-A) reveals that the complex forms a 3D hydrogen-bonded organic framework (HOF) in the solid state. Both H2(TPPP-A) and Pd(TPPP-A) were found to catalyze the photooxidation of sulfides by molecular oxygen in the acetonitrile-water mixture (1 : 1 v/v), while only Pd(TPPP-A) resulted in selective production of sulfoxides. The complex Pd(TPPP-A) was easily recovered through extraction in the aqueous phase and successfully reused in five consecutive cycles of the sulfoxidation reaction.

Thiacalixarene Carboxylic Acid Derivatives as Inhibitors of Lysozyme Fibrillation

Amyloid fibroproliferation leads to organ damage and is associated with a number of neurodegenerative diseases affecting populations worldwide. There are several ways to protect against fibril formation, including inhibition. A variety of organic compounds based on molecular recognition of amino acids within the protein have been proposed for the design of such inhibitors. However, the role of macrocyclic compounds, i.e., thiacalix[4]arenes, in inhibiting fibrillation is still almost unknown. In the present work, the use of water-soluble thiacalix[4]arene derivatives for the inhibition of hen egg-white lysozyme (HEWL) amyloid fibrillation is proposed for the first time. The binding of HEWL by the synthesized thiacalix[4]arenes (logKa = 5.05-5.13, 1:1 stoichiometry) leads to the formation of stable supramolecular systems capable of stabilizing the protein structure and protecting against fibrillation by 29-45%. The macrocycle conformation has little effect on protein binding strength, and the native HEWL secondary structure does not change via interaction. The synthesized compounds are non-toxic to the A549 cell line in the range of 0.5-250 µg/mL. The results obtained may be useful for further investigation of the anti-amyloidogenic role of thiacalix[4]arenes, and also open up future prospects for the creation of new ways to prevent neurodegenerative diseases.

Stabilization of Lantern-Type Metal-Organic Cages (MOCs) by Protective Control of Ligand Exchange Rates

Self-assembling systems in nature display remarkable complexity with assemblies of different sub-units to generate functional species. Synthetic analogues of such systems are a challenge, often requiring the ability to bias distributions that are under thermodynamic assembly control. Using lantern-type MOCs (metal-organic cages) as a prototypical self-assembling system, herein we explore the role that steric bulk plays in controlling the exchange rate of ligands in paddlewheel-based assemblies, and thus the stability of cages, in competitive self-assembling scenarios. The effective lifetime of the lantern-type MOCs varies over an order of magnitude depending on the steric bulk proximal to the metal nodes with lifetimes of the cages ranging from tens of minutes to several hours. The bulk of the coordinating solvents likewise reduces the rate of ligand exchange, and thus yields longer-lived species. Understanding this subtle effect has implications for controlling the stability of complex assemblies in competitive environments with implications for guest release and application.

Nanomaterials Based on 2,7,12,17-Tetra-tert-butyl-5,10,15,20-tetraaza-21H,23H-porphine Exhibiting Bifunctional Sensitivity for Monitoring Chloramphenicol and Co2

Monitoring antibiotic retention in human body fluids after treatment and controlling heavy metal content in water are important requirements for a healthy society. Therefore, the approach proposed in this study is based on developing new optical sensors using porphyrin or its bifunctional hybrid materials made with AuNPs to accomplish the accurate detection of chloramphenicol and cobalt. To produce the new optical chloramphenicol sensors, 2,7,12,17-tetra-tert-butyl-5,10,15,20-tetraaza-21H,23H-porphine (TBAP) was used, both alone in an acid medium and as a hybrid material with AuNPs in a water-DMSO acidified environment. The same hybrid material in the unchanged water-DMSO medium was the sensing material used for Co2+ monitoring. The best results of the hybrid materials were explained by the synergistic effects between the TBAP azaporphyrin and AuNPs. Chloramphenicol was accurately detected in the range of concentrations between 3.58 × 10-6 M and 3.37 × 10-5 M, and the same hybrid material quantified Co2+ in the concentration range of 8.92 × 10-5 M-1.77 × 10-4 M. In addition, we proved that AuNPs can be used for the detection of azaporphyrin (from 2.66 × 10-5 M to 3.29 × 10-4 M), making them a useful tool to monitor porphyrin retention after cancer imaging procedures or in porphyria disease. In conclusion, we harnessed the multifunctionality of this azaporphyrin and of its newly obtained AuNP plasmonic hybrids to detect chloramphenicol and Co2+ quickly, simply, and with high precision.

Phosphorus(V) Tetraazaporphyrin with an Intense, Broad CT Band in the Near-IR Region

In phosphorus tetraazaporphyrins (PTAPs), the Q- and charge-transfer (CT) bands appear as a result of configuration interaction between their excited states. On the basis of this concept, a PTAP with an intense, broad CT band in the near-IR region has been rationally designed and realized by introducing eight diphenylaminophenyl (dPAP) groups. The order of the CT and Q-bands in ascending energy was supported by magnetic circular dichroism (MCD) spectroscopy and theoretical calculations. An intense two-photon absorption was also found in the deep near-IR region.

Preparation, X-ray Characterization, and Reactivity of the Rod-like and Angular Germanium- and Titanium(IV)-Capped Iron(II) Bis-Clathrochelates and Their Mono- and Bis-Capped (Semi)clathrochelate Precursors

Transmetalation of the bis{triethylantimony(V)}-capped iron(II) tris-α-dioximate with n-butylboronic acid afforded the mixed antimony, boron cross-linked clathrochelate with single reactive antimony(V)-based apical fragment. This macrobicyclic precursor easily underwent the transmetalation reactions with germanium and titanium(IV) alkoxides to give the rod-like and angular FeII2MIV-trinuclear bis-clathrochelates. Those of the aforementioned diantimony(V)-capped complex with 3- and 4-carboxyphenylboronic acids afforded the monoboron-capped iron(II) semiclathrochelates, undergoing a double-cyclization (macrobicyclization) with germanium- and titanium(IV)-based capping agents. The reactions in the low-temperature range unexpectedly gave the stable 2:1 associates, formed by the bridging of two carboxyl-terminated macrobicyclic molecules of the mixed carboxylboron, triethylantimony-capped iron(II) clathrochelate with a triethylantimony(V)-based linker fragment. The obtained complexes were characterized using elemental analysis, MALDI-TOF, 1H and 13C{1H} NMR and UV-vis spectra, and single-crystal XRD experiments. The encapsulated iron(II) ion in their 3D-molecules is situated almost in the center of its FeN6-coordination polyhedron possessing a truncated trigonal-pyramidal geometry. Fe-N distances fall in the range 1.887(7)-1.945(4) Å characteristic of the low-spin iron(II) complexes. The cross-linking titanium and germanium(IV) ions in the corresponding bis-clathrochelate molecules form the octahedral MIVO6-coordination polyhedra, the MIV-O distances of which vary from 1.946(2) to 1.964(2) Å and from 1.879(7) to 1.907(6) Å, respectively.

Förster-free Effect Fluorescence Quenching of 5,10,15,20-tetraphenylporphyrin in Solution

The absorption of exciting light by an inner filter may be the cause of large errors in estimating the efficiency of fluorescence quenching. We performed fluorescence measurements of 5,10,15,20-tetraphenylporphyrin toluene solution in a wide concentration range. We have shown a Förster-free fluorescence quenching in a right-angle geometry experiment, caused by second order inner filter. We proposed to perform measurements in a front-surface geometry to investigate the nature of quenching not related to the inner filters. We have shown that concentration effects in tetraphenylporphyrin solutions in toluene are not accompanied by a decrease in the fluorescence intensity in a front-surface geometry at concentrations of 10- 3-10- 7 mol/l. It was possible to separate the phenomena of the internal filters from the processes occurring in a liquid medium. Our results are of great importance due to the widespread fundamental research of porphyrin-based dyes properties.

Photosensitizing effects and physicochemical properties of chlorophyll a derivatives with hydrophilic oligoethylene glycol fragments at the macrocycle periphery

In this work, screening studies of the cytotoxic effect of chlorins with fragments of di-, tri-, and pentaethylene glycol at the macrocycle periphery in relation to HeLa, A549, and HT29 cells were performed. It is shown that, despite different hydrophobicity, all the compounds studied have a comparable photodynamic effect. The conjugate of chlorin e6 with pentaethylene glycol, which has the lowest tendency to association among the studied compounds with tropism for low density lipoproteins and the best characteristics of the formation of molecular complexes with Tween 80, has a significant difference in dark and photoinduced toxicity (ratio IC50(dark)/IC50(photo) approximately 2 orders of magnitude for all cell lines), which allows to hope for a sufficiently large "therapeutic window". A study of the interaction of this compound with HeLa cells shows that the substance penetrates the cell and, after red light irradiation induces ROS appearance inside the cell, associated, apparently, with the photogeneration of singlet oxygen. These data indicate that photoinduced toxic effects are caused by damage to intracellular structures as a result of oxidative stress. Programmed type of cell death characterized with caspase-3 induction is prevailing. So, the conjugate of chlorin e6 with pentaethylene glycol is a promising antitumor PS that can be successfully solubilized with Tween 80, which makes it suitable for further in vivo studies.

Novel mixed heterovalent (Mo/Co)Ox-zerovalent Cu system as bi-functional electrocatalyst for overall water splitting

A novel hybrid ternary metallic electrocatalyst of amorphous Mo/Co oxides and crystallized Cu metal was deposited over Ni foam using a one-pot, simple, and scalable solvothermal technique. The chemical structure of the prepared ternary electrocatalyst was systematically characterized and confirmed via XRD, FTIR, EDS, and XPS analysis techniques. FESEM images of (Mo/Co)Ox-Cu@NF display the formation of 3D hierarchical structure with a particle size range of 3-5 µm. The developed (Mo/Co)Ox-Cu@NF ternary electrocatalyst exhibits the maximum activity with 188 mV and 410 mV overpotentials at 50 mA cm-2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Electrochemical impedance spectroscopy (EIS) results for the (Mo/Co)Ox-Cu@NF sample demonstrate the minimum charge transfer resistance (Rct) and maximum constant phase element (CPE) values. A two-electrode cell based on the ternary electrocatalyst just needs a voltage of about 1.86 V at 50 mA cm-2 for overall water splitting (OWS). The electrocatalyst shows satisfactory durability during the OWS for 24 h at 10 mA cm-2 with an increase of only 33 mV in the cell potential.

Correction: Mamardashvili et al. New Polyporphyrin Arrays with Controlled Fluorescence Obtained by Diaxial Sn(IV)-Porphyrin Phenolates Chelation with Cu2+ Cation. Polymers 2021, 13, 829

In the original publication [...].

Does Larger Cavity-Size Really Help Bigger Anions to Bind? A Scrutiny on Core-Expanded Calix[4]pyrroles and Their Properties

Calix[4]pyrroles are an important class of oligopyrrolic macrocycles and have found applications in many diverse fields including anion recognition. To modulate the properties of the calix[4]pyrrole, several structural modifications are realized. The core-expansion has attracted extra attention as it provides larger cavity-size compared to parent calix[4]pyrrole(s). This review highlights the synthetic development of various core-expanded calix[4]pyrroles and their applications in anion-binding properties. Emphasis is given to the changes in the binding properties observed with expanded versions of calix[4]pyrrole(s) in both solution and the solid states. The expanded versions of calix[4]pyrrole do not always show higher binding affinities for larger anions as anticipated. Rather, they display reduced affinities with the anions. The truncated form or asymmetric nature of the expanded versions of calix[4]pyrrole does not probably allow to access all the available binding sites for the anions and hence reduced binding affinities are observed. The receptors which contain a greater number of binding sites and are somehow rigid or preorganized apparently show enhanced binding affinities for anions. The relative binding constants for halide series indicate that the enlarged molecules are more beneficial for largest iodide among others. However, most of the receptors show selectivity towards smallest fluoride over other anions studied.

The Influence of the Nature of the Polymer Incorporating the Same A3B Multifunctional Porphyrin on the Optical or Electrical Capacity to Recognize Procaine

The multifunctionality of an A3B mixed-substituted porphyrin, namely 5-(4-carboxyphenyl)-10,15,20-tris(4-methylphenyl)porphyrin (5-COOH-3MPP), was proven due to its capacity to detect procaine by different methods, depending on the polymer matrix in which it is incorporated. The hybrid nanomaterial containing k-carrageenan and AuNPs (5-COOH-3MPP-k-carrageenan-AuNPs) was able to optically detect procaine in the concentration range from 5.76 × 10-6 M to 2.75 × 10-7 M, with a limit of detection (LOD) of 1.33 × 10-7 M. This method for the detection of procaine gave complementary results to the potentiometric one, which uses 5-COOH-3MPP as an electroactive material incorporated in a polyvinylchloride (PVC) membrane plasticized with o-NPOE. The detected concentration range by this ion-selective membrane electrode is wider (enlarged in the field of higher concentrations from 10-2 to 10-6 M), linearly dependent with a 53.88 mV/decade slope, possesses a detection limit of 7 × 10-7 M, a response time of 60 s, and has a certified stability for a working period of six weeks.

Synthesis of Calamitic Fluorinated Mesogens with Complex Crystallization Behavior

This work presents the synthesis and self-organization of the calamitic fluorinated mesogen, 1,1,2,2-tetrafluoro-2-(1,1,2,2-tetrafluoro-4-iodobutoxy)ethanesulfonic acid, a potential model for perfluorosulfonic acid membranes (PFSA). The compound is derived in three steps from 1,1,2,2-tetrafluoro-2-(1,1,2,2-tetrafluoro-2-iodoethoxy)ethanesulfonyl fluoride, achieving a 78% overall yield. The resulting compound exhibits intricate thermal behavior. At 150 °C, a crystal-to-crystal transition is observed due to the partial disordering of calamitic molecules, which is followed by isotropization at 218 °C. Upon cooling, sample ordering occurs through the formation of large smectic liquid crystalline phase domains. This thermotropic state transforms into a layered crystal phase at lower temperatures, characterized by alternating hydrophilic and hydrophobic layers. Using X-ray diffraction, crystalline unit cell models at both room temperature and 170 °C were proposed. Computer simulations of the molecule across varying temperatures support the idea that thermal transitions correlate with a loss of molecular orientation. Importantly, the study underscores the pivotal role of precursor self-organization in aligning channels during membrane fabrication, ensuring controlled and oriented positioning.

Redox-Active Ligand Assisted Multielectron Catalysis: A Case of Electrocatalyzed CO2-to-CO Conversion

The selective reduction of carbon dioxide remains a significant challenge due to the complex multielectron/proton transfer process, which results in a high kinetic barrier and the production of diverse products. Inspired by the electrostatic and H-bonding interactions observed in the second sphere of the [NiFe]-CODH enzyme, researchers have extensively explored these interactions to regulate proton transfer, stabilize intermediates, and ultimately improve the performance of catalytic CO2 reduction. In this work, a series of cobalt(II) tetraphenylporphyrins with varying numbers of redox-active nitro groups were synthesized and evaluated as CO2 reduction electrocatalysts. Analyses of the redox properties of these complexes revealed a consistent relationship between the number of nitro groups and the corresponding accepted electron number of the ligand at -1.59 V vs. Fc+/0. Among the catalysts tested, TNPPCo with four nitro groups exhibited the most efficient catalytic activity with a turnover frequency of 4.9 × 104 s-1 and a catalytic onset potential 820 mV more positive than that of the parent TPPCo. Furthermore, the turnover frequencies of the catalysts increased with a higher number of nitro groups. These results demonstrate the promising design strategy of incorporating multielectron redox-active ligands into CO2 reduction catalysts to enhance catalytic performance.

Towards Antibacterial Agents: Synthesis and Biological Activity of Multivalent Amide Derivatives of Thiacalix[4]arene with Hydroxyl and Amine Groups

Antimicrobial resistance to modern antibiotics stimulates the search for new ways to synthesize and modify antimicrobial drugs. The development of synthetic approaches that can easily change different fragments of the molecule is a promising solution to this problem. In this work, a synthetic approach was developed to obtain multivalent thiacalix[4]arene derivatives containing different number of amine and hydroxyl groups. A series of macrocyclic compounds in cone, partial cone, and 1,3-alternate stereoisomeric forms containing -NHCH2CH2R (R = NH2, N(CH3)2, and OH) and -N(CH2CH2OH)2 terminal fragments, and their model non-macrocyclic analogues were obtained. The antibacterial activity against Gram-positive (Staphylococcus aureus, Bacillus cereus, and Enterococcus faecalis) and Gram-negative (Escherichia coli and Pseudomonas aeruginosa) bacterial strains and cytotoxicity of the obtained compounds were studied. Structure-activity relationships were established: (1) the macrocyclic compounds had high antibacterial activity, while the monomeric compounds had low activity; (2) the compounds in cone and partial cone conformations had better antibacterial activity compared to the compounds in 1,3-alternate stereoisomeric form; (3) the macrocyclic compounds containing -NHCH2CH2N(CH3)2 terminal fragments had the highest antibacterial activity; (4) introduction of additional terminal hydroxyl groups led to a significant decrease in antibacterial activity; (5) the compounds in partial cone conformation had significant bactericidal activity against all studied cell strains; the best selectivity was observed for the compounds in cone conformation. The mechanism of antibacterial activity of lead compounds with terminal fragments -NHCH2CH2N(CH3)2 was proved using model negatively charged POPG vesicles, i.e., the addition of these compounds led to an increase in the size and zeta potential of the vesicles. The obtained results open up the possibility of using the synthesized macrocyclic compounds as promising antibacterial agents.

Photophysical characterization of tetrahydroxyphenyl porphyrin Zn(II) and V(IV) complexes: experimental and DFT study

Photodynamic therapy (PDT) is a promising technique for the treatment of various diseases. In this sense, the singlet oxygen quantum yield (Φ∆) is a physical-chemical property that allows to stablish the applicability of a potential photosensitizers (PS) as a drug for PDT. In the herein report, the Φ∆ of three photosensitizers was determined: metal-free tetrahydroxyphenyl porphyrin (THPP), THPP-Zn and the THPP-V metal complexes. Their biological application was also evaluated. Therefore, the in vitro study was carried out to assess their biological activity against Escherichia coli. The metal-porphyrin complexes exhibited highest activities against the bacterial strain Escherichia coli. at the highest concentration (175 μg/mL) and show better activity than the free base ligand (salts and blank solution). Results indicated a relation between Φ∆ and the inhibitory activity against Escherichia coli, thus, whereas higher is the Φ∆, higher is the inhibitory activity. The values of the Φ∆ and the inhibitory activity follows the tendency THPP-Zn > THPP > THPP-V. Furthermore, quantum chemical calculations allowed to gain deep insight into the electronic and optical properties of THPP-Zn macrocycle, which let to verify the most probable energy transfer pathway involved in the singlet oxygen generation.

Synthesis, Structure, and Redox and Optical Properties of 5,10,15,20-Tetraaryl-5-azaporphyrinium Salts

The fundamental properties of azaporphyrins can be modulated over a wide range by changing the number of meso-nitrogen atoms. Reported herein are the first examples of 5,10,15,20-tetraaryl-5-azaporphyrinium (MTAMAP) salts, which were prepared via metal-templated cyclization of the corresponding zinc(II) and copper(II) complexes of 10-aryl-1-chloro-19-benzoyl-5,15-dimesityl-10-azabiladiene-ac. The inclusion of one meso-nitrogen atom in the 5,10,15,20-tetraarylporphyrin skeleton considerably changes the redox and optical properties as well as the degree of aromaticity of the porphyrin ring. The present findings suggest that MTAMAP salts would be promising scaffolds for the development of new azaporphyrin-based ionic fluorophores and photosensitizers.

Mn-porphyrins in a four-helix bundle participate in photo-induced electron transfer with a bacterial reaction center

Hybrid complexes incorporating synthetic Mn-porphyrins into an artificial four-helix bundle domain of bacterial reaction centers created a system to investigate new electron transfer pathways. The reactions were initiated by illumination of the bacterial reaction centers, whose primary photochemistry involves electron transfer from the bacteriochlorophyll dimer through a series of electron acceptors to the quinone electron acceptors. Porphyrins with diphenyl, dimesityl, or fluorinated substituents were synthesized containing either Mn or Zn. Electrochemical measurements revealed potentials for Mn(III)/Mn(II) transitions that are ~ 0.4 V higher for the fluorinated Mn-porphyrins than the diphenyl and dimesityl Mn-porphyrins. The synthetic porphyrins were introduced into the proteins by binding to a four-helix bundle domain that was genetically fused to the reaction center. Light excitation of the bacteriochlorophyll dimer of the reaction center resulted in new derivative signals, in the 400 to 450 nm region of light-minus-dark spectra, that are consistent with oxidation of the fluorinated Mn(II) porphyrins and reduction of the diphenyl and dimesityl Mn(III) porphyrins. These features recovered in the dark and were not observed in the Zn(II) porphyrins. The amplitudes of the signals were dependent upon the oxidation/reduction midpoint potentials of the bacteriochlorophyll dimer. These results are interpreted as photo-induced charge-separation processes resulting in redox changes of the Mn-porphyrins, demonstrating the utility of the hybrid artificial reaction center system to establish design guidelines for novel electron transfer reactions.

Evaluation of Oromucosal Natural Gum-Based Emulgels as Novel Strategy for Photodynamic Therapy of Oral Premalignant Lesions

Photodynamic therapy (PDT) recently has been shown as a promising option in the treatment of premalignant lesions of the soft oral tissues. Effective delivery of photosensitizer is challenging due to poor drug adherence to the oromucosal epithelium. In the present work, emulgels composed of natural polysaccharide gums (tragacanth, xanthan and gellan) were evaluated as novel oromucosal platforms of delta-aminolevulinic acid (ALA) for PDT. Apart from mucoadhesive and textural analysis, the specific steps involved studies on drug penetration behavior and safety profile using a three-dimensional human oral epithelium model (HOE). All designed emulgels presented greater mucoadhesiveness when compared to commercial oromucosal gel. Incorporation of ALA affected textural properties of emulgels, and tragacanth/xanthan formulation with greater hardness and cohesiveness exhibited a protective function against the mechanical tongue stress. Permeability studies revealed that ALA is capable of penetrating across oromucosal epithelium by passive transport and all formulations promoted its absorption rate when compared to a commercial topical product with ALA. Importantly, the combination of tragacanth and xanthan profoundly enhanced photosensitizer retention in the buccal epithelium. Tested samples performed negligible reduction in cell viability and moderately low IL-1β release, confirming their non-irritancy and compatibility with HOE. Overall, the presented findings indicate that tragacanth/xanthan emulgel holds promise as an oromucosal ALA-carrier for PDT strategy.

Free-Base Corrole Anion

Free-base corroles have long been known to be acidic, readily undergoing deprotonation by mild bases and in polar solvents. The conjugate base, however, has not been structurally characterized until now. Presented here is a first crystal structure of a free-base corrole anion, derived from tris(p-cyanophenyl)corrole, as the tetrabuylammonium salt. The low-temperature (100 K) structure reveals localized hydrogens on a pair of opposite pyrrole nitrogens. DFT calculations identify such a structure as the global minimum but also point to two cis tautomers only 4-7 kcal/mol above the ground state. In terms of free energy, however, the cis tautomers are above or essentially flush with the trans-to-cis barrier so the cis tautomers are unlikely to exist or be observed as true intermediates. Thus, the hydrogen bond within each dipyrrin unit on either side of the molecular pseudo-C2 axis through C10 (i.e., between pyrrole rings A and B or between C and D) qualifies as or closely approaches a low-barrier hydrogen bond. Proton migration across the pseudo-C2 axis entails much higher activation energies >20 kcal/mol, reflecting the relative rigidity of the molecule along the C1-C19 pyrrole-pyrrole linkage.

Protein Photodamaging Activity and Photocytotoxic Effect of an Axial-Connecting Phosphorus(V)porphyrin Trimer

An axial-connecting trimer of the porphyrin phosphorus(V) complex was synthesized to evaluate the relaxation process of the photoexcited state and the photosensitizer activity. The photoexcitation energy was localized on the central unit of the phosphorus(V)porphyrin trimer. The photoexcited state of the central unit was relaxed through a process similar to that of the monomer phosphorus(V)porphyrin. The excited state of this axially connected type of phosphorus(V)porphyrin trimer was not deactivated through intramolecular electron transfer. The singlet oxygen generation quantum yield of the trimer was almost the same as that of the monomer. The phosphorus(V)porphyrin, trimer, and monomer bound to human serum albumin and oxidized the tryptophan residue via singlet oxygen generation and electron transfer during visible light irradiation. The photocytotoxicity of these phosphorus(V)porphyrins on two cell lines was examined. The monomer induced photocytotoxicity; however, the trimer did not show cytotoxicity with or without photoirradiation. In summary, the photoexcited state of the trimer was almost the same as that of the monomer, and these phosphorus(V)porphyrins demonstrated a similar protein-photodamaging activity. The difference in association between the photosensitizer molecules and cells is the key factor of phototoxicity by these phosphorus(V)porphyrins.

Periodate-Mediated Aerobic Oxidation of Sulfides over a Bifunctional Porphyrin-polyoxometalate Catalyst: Photosensitized Singlet Oxygen Oxidation of Iodate to Periodate

Regeneration of terminal oxidants by molecular oxygen in metal-catalyzed oxidations of organic substrates has the advantage of avoiding the use of stoichiometric amounts of hazardous and/or expensive reagents to meet (some of) the green chemistry requirements. In the present study, photosensitized singlet oxygen oxidation of iodate to periodate has been used to regenerate the oxidant in polyoxometalate (POM)-catalyzed oxidation of sulfides to sulfoxides with periodate in water. To the best of our knowledge, it is the first report on singlet oxygen oxidation of iodate to periodate. In order to determine the contribution of photooxidation and oxidation pathways in the formation of sulfoxide, the oxidation of diphenyl sulfide with a very low reactivity toward aerobic photooxidation was studied; a sevenfold increase in the conversion of the sulfide to the diphenyl sulfoxide was observed for the reaction conducted in the presence of H2TMPyP-PW12O40/IO3-/O2/hν compared to that in the presence of H2TMPyP-PW12O40/O2/hν. Also, under the same conditions, a ca. 1.5-fold increase was observed in the case of methyl phenyl sulfide, which shows high reactivity toward both the oxidation and photooxidation reactions. A porphyrin-POM nanocomposite formed by the electrostatic immobilization of meso-tetra(N-methylpyridinium-4-yl)porphyrin (H2TMPyP) on PW12O40 was employed for the one-pot oxidation and photooxidation reactions. Field-emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), diffuse-reflectance UV-vis spectroscopy, thermal gravimetric analysis, and Fourier transform infrared were used to characterize the formation of the hybrid compound. An average particle size of 42 nm was estimated for H2TMPyP-PW12O40 from XRD peak broadening using the Scherrer equation. Also, FESEM images showed the formation of nearly spherical nanoparticles with a size of ca. 200 nm. The redshift of the Soret band of H2TMPyP upon immobilization on POM was attributed to strong N-H···O hydrogen-bond interactions between POM and porphyrin.

Tetrahomo corona[4]arene-based spirophanes: synthesis, structure, and properties

In contrast to a plethora of macrocyclic and cage compounds, spirophanes have remained largely unexplored. We report herein the construction, structure and properties of unprecedented tetrahomo corona[4]arene-based ditopic and tritopic macrocycles of spiro structures. Synthesis was conveniently achieved by means of an efficient SNAr reaction from simple and commercially available starting materials. Racemic samples were resolved into enantiopure chiral tetrahomo i-corona[4]arenes, spirophanes and bispirophanes which show interesting chiroptical properties. The acquired electron-deficient macrocyclic compounds were found to adopt unique conformational structures and to form distinct complexes with TTF in the solid state. Our study provides a new opportunity to develop multitopic macrocycles of different topologies which have potential applications in supramolecular chemistry.

Nanostructured Aluminum Oxyhydroxide-A Prospective Support for Functional Porphyrin-Based Materials

A method for the grafting of unsymmetrical A2BC-type 5,15-bis(4-butoxyphenyl)-10-(4-carboxyphenyl)-20-(phenanthrenoimidazolyl)-porphyrin onto the surface of nanostructured aluminum oxyhydroxide modified with a single SiO2 layer (NAOM) was successfully developed. A straightforward procedure towards surface modification of NAOM allowed us to prepare a new porphyrin-containing hybrid material. The obtained 3D heterostructure was extensively characterized using XPS, TEM and diffuse reflectance spectroscopy. Structural and morphological peculiarities of the inorganic support before and after the immobilization procedure were studied and discussed in detail. The stability of the material against leaching and the porphyrin immobilization ratio ca. 14% by weight were also revealed.

Synthesis and Characterization of Bulky Substituted Hemihexaphyrazines Bearing 2,6-Diisopropylphenoxy Groups

New substituted [30]trithiadodecaazahexaphyrines (hemihexaphyrazines) were synthesized by a crossover condensation of 2,5-diamino-1,3,4-thiadiazole with 4-chloro-5-(2,6-diisopropylphenoxy)- or 4,5-bis-(2,6-diisopropylphenoxy)phthalonitriles. The compounds were characterized by 1H-, 13C-NMR, including COSY, HMBC, and HSQC spectroscopy, MALDI TOF spectrometry, elemental analysis, IR and UV-Vis absorbance and fluorescence techniques.

Progress of the "Molecular Informatics" Section in 2022

This is the first Editorial of the "Molecular Informatics" Section (MIS) of the International Journal of Molecular Sciences (IJMS), which was created towards the end of 2018 (the first article was submitted on 27 September 2018) and has experienced significant growth from 2018 to now [...].

Highly reusable bentonite clay@biochar@Fe3O4 nanocomposite for Hg(II) removal from synthetic and real wastewater

The present research investigates the performance of bentonite clay@biochar@Fe₃O₄ nanocomposite in removing mercury ions (Hg²⁺) from aqueous media. The physical and structural properties of bentonite clay@biochar@Fe₃O₄ were determined using Brunauer-Emmett-Teller (BET), vibrating-sample magnetometer (VSM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), and Raman analyses. The highest uptake efficiency of Hg²⁺ was obtained at pH 6, Hg²⁺ concentration of 10 mg/L, contact time of 80 min, and the composite dose of 1.5 g/L. Under these conditions, the uptake efficiency of bentonite clay@biochar@Fe₃O₄ and bentonite clay was obtained as 98.78% and 97.67%, respectively, which are remarkable values. Also, the q_max values in Hg²⁺ removal using bentonite clay@biochar@Fe₃O₄ and bentonite clay were obtained as 66.66 and 60.98 mg/g, respectively. Moreover, the uptake process of Hg²⁺ ions using bentonite clay@biochar@Fe₃O₄ nanocomposite and bentonite was spontaneous, physical, favorable, and exothermic. Besides, the impact of various divalent ions such as Co²⁺, Cu²⁺, Pb²⁺, Ni²⁺, and Zn²⁺ on the removal efficiency of Hg²⁺ was studied. The results showed that Co²⁺ and Zn²⁺ ions have the highest and lowest interference effect in Hg²⁺ removal, respectively. Also, the reusability of both adsorbents showed that they have high stability and can be used for at least 5 cycles with high uptake efficiency. Additionally, the removal efficiency of chemical oxygen demand (COD), biochemical oxygen demand (BOD₅), Hg²⁺, As³⁺, and As⁵⁺ from real wastewater using bentonite clay@biochar@Fe₃O₄ was obtained as 37.5%, 28.9%, 65%, 60.5%, and 50%, respectively, indicating its remarkable performance.

Green-step assembly of the supramolecular amphiphile constructed by sodium carboxymethyl cellulose and calixarene for facile loading of hydrophobic food bioactive compounds

The use of biologically active compounds is often limited due to their poor aqueous solubility, which generally reduces their bioavailability and useful efficacy. In this regard, a wide search is currently underway for colloidal systems capable of encapsulating these compounds. In the creation of colloidal systems, long-chain molecules of surfactants and polymers are mainly used, which in an individual state do not always aggregate into homogeneous and stable nanoparticles. In the present work, cavity-bearing calixarene was used for the first time to order polymeric molecules of sodium carboxymethyl cellulose. A set of physicochemical methods demonstrated the spontaneous formation of spherical nanoparticles by non-covalent self-assembly contributed by macrocycle and polymer, and formed nanoparticles were able to encapsulate hydrophobic quercetin and oleic acid. The preparation of nanoparticles by supramolecular self-assembly without use of organic solvents, temperature and ultrasound effects can be an effective strategy for creating water-soluble forms of lipophilic bioactive compounds.

First report of trans-A2B-corrole derived from a lapachone derivative: photophysical, TD-DFT and photobiological assays

In this work, the synthesis, characterization and photophysical assays of a new trans-A₂B-corrole derivative from the naturally occurring quinone are described. β-Lapachone is a naturally occurring quinoidal compound that provides highly fluorescent heterocyclic compounds such as lapimidazoles. The new trans-A₂B-corrole compound was obtained from the reaction between 2,3,4,5,6-(pentafluorophenyl)dipyrromethane and the lapimidazole bearing an aldehyde group. The dyad was characterized by high-resolution mass spectrometry (HRMS), NMR spectroscopy (¹H, COSY 2D, HMBC, ¹⁹F), FT-IR, UV-vis, steady-state and time-resolved fluorescence, electrochemical studies (CV), TD-DFT analysis and photobiological experiments, in which includes aggregation, stability in solution, photostability and partition coefficients assays. Finally, ROS generation assays were performed using 1,3-diphenylisobenzofuran (DPBF) method and the presented compound showed significant photostability and singlet oxygen production.

Heteroligand Iron(V) Complexes Containing Porphyrazine, trans-Di[benzo]porphyrazine or Tetra[benzo]porphyrazine, Oxo and Fluoro Ligands: DFT Quantum-Chemical Study

By using quantum chemical calculation data obtained by the DFT method with the B3PW91/TZVP and OPBE/TZVP levels, the possibility of the existence of three Fe(V) complexes, each of which contains in the inner coordination sphere porphyrazine/trans-di[benzo]porphyrazine/tetra[benzo]porphyrazine (phthalocyanine), oxygen (O^2-) and fluorine (F^-) ions, was shown. Key geometric parameters of the molecular structure of these heteroligand complexes are given; it is noted that FeN4 chelate nodes, and all metal-chelate and non-chelate cycles in each of these compounds, are practically planar with the deviation from coplanarity, as a rule, by no more than 0.5°. Furthermore, the bond angles between two nitrogen atoms and an Fe atom are equal to 90°, or less than this by no more than 0.1°, while the bond angles between donor atoms N, Fe, and O or F, in most cases, albeit insignificantly, differ from this value. Nevertheless, the bond angles formed by Fe, O and F atoms are exactly 180°. It is shown that good agreement occurs between the structural data obtained using the above two versions of the DFT method. NBO analysis data for these complexes are presented; it is noted that, according to both DFT methods used, the ground state of the each of three complexes under consideration may be a spin quartet or spin doublet. Additionally, standard thermodynamic parameters of formation (standard enthalpy ∆_fH⁰, entropy S⁰ and Gibbs's energy ∆_fG⁰) for the macrocyclic compounds under consideration are calculated.

Multistep synthesis and X-ray structures of carboxyl-terminated hybrid iron(II) phthalocyaninatoclathrochelates and their postsynthetic transformation into polytopic carboranyl-containing derivatives

A multistep general synthetic strategy towards polytopic carboranyl-containing (semi)clathrochelate metal complexes, based on the template synthesis, transmetallation, amide condensation and 1,3-dipolar cycloaddition reactions, is developed. Their mono(semi)clathrochelate precursors with a single reactive group were obtained using a transmetallation of the triethylantimony-capped macrobicyclic precursor. The thus obtained carboxyl-terminated iron(II) semiclathrochelate underwent a macrobicyclization with zirconium(IV) phthalocyaninate to form the corresponding phthalocyaninatoclathrochelate. The direct one-pot template condensation of the suitable chelating and cross-linking ligand synthons on the Fe²⁺ ion as a matrix was also used for its preparation. Further amide condensation of the aforementioned semiclathrochelate and hybrid complexes with propargylamine in the presence of carbonyldiimidazole gave the (pseudo)cage derivatives with a terminal CC bond. Their "click" reaction with an appropriate carboranylmethyl azide afforded the ditopic carboranosemiclathrochelates and the tritopic carboranyl-containing phthalocyaninatoclathrochelates with a flexible spacer fragment between their polyhedral entities. The obtained new complexes were characterized using elemental analysis, MALDI-TOF mass spectrometry, multinuclear NMR, and UV-vis spectroscopy, and by single crystal X-ray diffraction experiments. Their FeN₆-coordination polyhedra show a truncated trigonal-pyramidal geometry, while the cross-linking heptacoordinate Zr⁴⁺ or Hf⁴⁺ cations in the hybrid compounds form the M^IVN₄O₃-coordination polyhedra with the geometry of a capped trigonal prism.

Accurate prediction of 11B NMR chemical shift of BODIPYs via machine learning

In this article, we present the results of developing a model based on an RFR machine learning method using the ISIDA fragment descriptors for predicting the ¹¹B NMR chemical shift of BODIPYs. The model is freely available at https://ochem.eu/article/146458. The model demonstrates the high quality of predicting the ¹¹B NMR chemical shift (RMSE, 5CV (FINALE training set) = 0.40 ppm, RMSE (TEST set) = 0.14 ppm). In addition, we compared the "cost" and the user-friendliness for calculations using the quantum-chemical model with the DFT/GIAO approach. The ¹¹B NMR chemical shift prediction accuracy (RMSE) of the model considered is more than three times higher and tremendously faster than the DFT/GIAO calculations. As a result, we provide a convenient tool and database that we collected for all researchers, that allows them to predict the ¹¹B NMR chemical shift of boron-containing dyes. We believe that the new model will make it easier for researchers to correctly interpret the ¹¹B NMR chemical shifts experimentally determined and to select more optimal conditions to perform an NMR experiment.

DFT Method Used for Prediction of Molecular and Electronic Structures of Mn(VI) Macrocyclic Complexes with Porhyrazine/Phthalocyanine and Two Oxo Ligands

By using the data of the DFT quantum chemical calculation in the OPBE/TZVP and B3PW91/TZVP levels, the possibility of the existence of a manganese(VI) heteroligand complex containing porphyrazine or its tetra[benzo] derivative (phthalocyanine) and two oxygen (O^2-) ligands, which is still unknown for this element, is shown. The parameters of the molecular structure, multiplicity of the ground state, NBO analysis data and standard thermodynamic parameters (enthalpy ΔH⁰_f, entropy S⁰_f and Gibbs's energy ΔG⁰_f of formation) of each of these metal macrocyclic compounds are presented. Additionally, it is noted that, based on the totality of structural data obtained by the above versions of the DFT method, the existence of a similar complex of manganese with di[benzo] derivative of porhyrazine and two oxygen (O^2-) ligands seems doubtful.

The role of solvents and concentrations in the properties of oxime bearing A2B corroles

A comprehensive study on the electronic spectral, photophysical and acid-base properties of phenyl- and methyl-oxime corrole derivatives and of triphenylcorrole (model corrole) has been performed, aiming to shed light on the existing species in the ground and excited states. Solvents and corrole concentration are found to govern the properties of the studied compounds and are determinants of their applicability in in vivo studies. In THF, the neutral corrole has two tautomeric forms (T1 and T2). In DMSO, the deprotonated form shows a characteristic long-wavelength Q band slightly shifted to blue when compared with the T1 tautomer and a higher fluorescence quantum yield. In ACN, with the increase of the corrole concentration formation of an aggregate due to homoconjugation (with dimer characteristics) is observed, and pioneeringly reported using UV-Vis and fluorescence studies and confirmed by carrying out titrations with TFA. The effect of the oxime group on the pK values of a corrole is found to influence the formation of a homoconjugate, namely by precluding its formation (at higher concentrations) when compared with the model corrole. TDDFT electronic quantum calculations support the experimental observations, namely the existence of tautomers and deprotonated species, with their respective electronic spectral features, further allowed proposing a structure for the homoconjugate complex in ACN. The characteristics of the oxime-corroles, namely a pK of ∼ 5, absorption and emission at ca. 650 nm and solvent dependent properties, make them good candidates for their use in biological systems either as probes, sensors, or as new sensitizers for photodynamic therapy.

Easily Switchable 18π-, 19π-, and 20π-Conjugation of Diazaporphyrin Double-Pincer Bispalladium Complexes

Ni^II 3,7,13,17-tetrapyridyl-5,15-diazaporphyrin serves as a double tridentate ligand to Pd^II ions to provide a pincer-type bispalladium complex. Electrochemical analysis revealed that the bispalladium complex shows excellent ability to accept electrons and reversible redox properties due to the coordination of the two cationic Pd^II centers to the meso-nitrogen atoms. We isolated and characterized one- and two-electron reduction species of the bispalladium complex. The 20π antiaromatic nature of the two-electron reduction species was confirmed by ¹ H NMR spectroscopy, UV/Vis-near-IR (NIR) absorption spectra, and density functional theory (DFT) calculations. X-ray diffraction revealed highly twisted structures for the bispalladium complexes regardless of the oxidation state.

Hallmarks of anticancer and antimicrobial activities of corroles

Corroles provide a remarkable opportunity for the development of cancer theranostic agents among other porphyrinoids. While most transition metal corrole complexes are only therapeutic, post-transition metallocorroles also find their applications in bioimaging. Moreover, corroles exhibit excellent photo-physicochemical properties, which can be harnessed for antitumor and antimicrobial interventions. Nevertheless, these intriguing, yet distinct properties of corroles, have not attained sufficient momentum in cancer research. The current review provides a comprehensive summary of various cancer-relevant features of corroles ranging from their structural and photophysical properties, chelation, protein/corrole interactions, to DNA intercalation. Another aspect of the paper deals with the studies of corroles conducted in vitro and in vivo with an emphasis on medical imaging (optical and magnetic resonance), photo/sonodynamic therapies, and photodynamic inactivation. Special attention is also given to a most recent finding that shows the development of pH-responsive phosphorus corrole as a potent antitumor drug for organelle selective antitumor cytotoxicity in preclinical studies. Another biomedical application of corroles is also highlighted, signifying the application of water-soluble and completely lipophilic corroles in the photodynamic inactivation of microorganisms. We strongly believe that future studies will offer a greater possibility of utilizing advanced corroles for selective tumor targeting and antitumor cytotoxicity. In the line with future developments, an ideal pipeline is envisioned on grounds of cancer targeting nanoparticle systems upon decoration with tumor-specific ligands. Hence, we envision that a bright future lies ahead of corrole anticancer research and therapeutics.

Specific nanoarchitecture of silica nanoparticles codoped with the oppositely charged Mn2+ and Ru2+ complexes for dual paramagnetic-luminescent contrasting effects

The silica nanoparticles (SNs) co-doped with paramagnetic ([Mn(HL)]^n-,) and luminescent ([Ru(dipy)₃]²⁺) complexes are represented. The specific distribution of [Mn(HL)]^n- within the SNs allows to achieve about ten-fold enhancing in magnetic relaxivities in comparison with those of [Mn(HL)]^n- in solutions. The leaching of [Mn(HL)]^n- from the shell can be minimized through the co-doping of [Ru(dipy)₃]²⁺ into the core of the SNs. The co-doped SNs exhibit colloid stability in aqueous solutions, including those modeling a blood serum. The surface of the co-doped SNs was also decorated by amino- and carboxy-groups. The cytotoxicity, hemoagglutination and hemolytic activities of the co-doped SNs are on the levels convenient for "in vivo" studies, although the amino-decorated SNs cause more noticeable agglutination and suppression of cell viability. The co-doped SNs being intravenously injected into mice allows to reveal their biodistribution in both ex vivo and in vivo conditions through confocal microscopy and magnetic resonance imaging correspondingly.

Synthesis and Design of Hybrid Metalloporphyrin Polymers Based on Palladium (II) and Copper (II) Cations and Axial Complexes of Pyridyl-Substituted Sn(IV)Porphyrins with Octopamine

Supramolecular metalloporphyrin polymers formed by binding tetrapyrrolic macrocycle peripheral nitrogen atoms to Pd(II) cations and Sn(IV)porphyrins extra-ligands reaction centers to Cu(II) cations were obtained and identified. The structure and the formation mechanism of obtained hydrophobic Sn(IV)-porphyrin oligomers and polymers in solution were established, and their resistance to UV radiation and changes in solution temperature was studied. It was shown that the investigated polyporphyrin nanostructures are porous materials with predominance cylindrical mesopores. Density functional theory (DFT) was used to geometrically optimize the experimentally obtained supramolecular porphyrin polymers. The sizes of unit cells in porphyrin tubular structures were determined and coincided with the experimental data. The results obtained can be used to create highly porous materials for separation, storage, transportation, and controlled release of substrates of different nature, including highly volatile, explosive, and toxic gases.

Electronic and steric effects controlling monomer-dimer self-assembly in 6H-1,4-diazepinoporphyrazines: an experimental and theoretical study

A series of 5,7-disubstituted 1,4-diazepinoporphyrazinato magnesium(II) and nickel(II) complexes, including two novel compounds, were obtained by metal-templated macrocyclization. A combination of X-ray diffraction, ¹H NMR, UV-vis, and electrochemical analyses allowed us to study their tendency towards H-type dimerization and trace the influence of structural and solvation factors on dimer stability. Based on the physicochemical and theoretical DFT calculation data, it was found that the main binding forces between 6H-1,4-diazepinoporphyrazine decks in the dimers were efficient π-π donor-acceptor interactions induced by the interdeck C-H⋯N hydrogen bonds. Furthermore, the metal-ligand (Pz^2- → M²⁺) electronic interactions have a key influence on the π-π stacking of the porphyrazine cores. It was shown that the displacement of the metal ion out of the macrocycle plane induced by coordinating agents can trigger the dissociation of the dimer, since the resulting enhancement of the donor-acceptor electronic interaction between the metal ion and the π-system of the ligand leads to a subsequent weakening of the π-π stacking of the porphyrazine cores. The TD-DFT calculations predicted the non-degeneracy of the HOMO-1 → LUMO and HOMO → LUMO+1 transitions in the 6H-1,4-diazepinoporphyrazine H-dimers, which explains the Q-band splitting in their UV-vis spectra.

Effects of Substituents on the Photophysical/Photobiological Properties of Mono-Substituted Corroles

The trans-A₂B-corrole series was prepared starting with 5-(pentafluorophenyl)dipyrromethene, which was then reacted with respective aryl-substituted aldehyde by Gryko synthesis. It was further characterized by HRMS and electrochemical methods. In addition, we investigated experimental photophysical properties (absorption, emission by steady-state and time-resolved fluorescence) in several solvents and TDDFT calculations, aggregation, photostability and reactive oxygen species generation (ROS), which are relevant when selecting photosensitizers used in photodynamic therapy and many other photo-applications. In addition, we also evaluated the biomolecule-binding properties with CT-DNA and HSA by spectroscopy, viscometry and molecular docking calculations assays.

Recognition Site Modifiable Macrocycle: Synthesis, Functional Group Variation and Structural Inspection

Traditional macrocyclic molecules encode recognition sites in their structural backbones, which limits the variation of the recognition sites and thus, would restrict the adjustment of recognition properties. Here, we report a new oligoamide-based macrocycle capable of varying the recognition functional groups by post-synthesis modification on its structural backbone. Through six steps of common reactions, the parent macrocycle (9) can be produced in gram scale with an overall yield of 31%. The post-synthesis modification of 9 to vary the recognition sites are demonstrated by producing four different macrocycles (10-13) with distinct functional groups, 2-methoxyethoxyl (10), hydroxyl (11), carboxyl (12) and amide (13), respectively. The ¹H NMR study suggests that the structure of these macrocycles is consistent with our design, i.e., forming hydrogen bonding network at both rims of the macrocyclic backbone. The ¹H-¹H NOESY NMR study indicates the recognition functional groups are located inside the cavity of macrocycles. At last, a preliminary molecular recognition study shows 10 can recognize n-octyl-β-D-glucopyranoside (14) in chloroform.