Chitosan as a bioactive polymer: Processing, properties and applications

Pullulan – Biopolymer with Potential for Use as Food Packaging

The materials used in food packaging based on non-biodegradable synthetic polymers pose a serious threat of pollution to the environment. Hence, research is now focused on developing eco-friendly and biodegradable packaging obtained from natural polymers. Pullulan is a microbial exopolysaccharide, obtained on a commercial scale by the yeast-like fungus Aureobasidium pullulans. It is a water-soluble, non-toxic and non-mutagenic edible biopolymer with excellent film-forming abilities and adhesive properties. Furthermore, pullulan presents great potential to fabricate thin, transparent, odorless and tasteless edible films and coating used as packaging material. This review article presents an overview on the basic mechanical and barrier properties of a pullulan-based film. It also describes the modification methods applied in order to obtain multifunctional materials in terms of satisfactory physico-mechanical performance and antimicrobial activity for food packaging.

Combining Carbon Nanotubes and Chitosan for the Vectorization of Methotrexate to Lung Cancer Cells

A hybrid system composed of multi-walled carbon nanotubes coated with chitosan was proposed as a pH-responsive carrier for the vectorization of methotrexate to lung cancer. The effective coating of the carbon nanostructure by chitosan, quantified (20% by weight) by thermogravimetric analysis, was assessed by combined scanning and transmission electron microscopy, and X-ray photoelectron spectroscopy (N1s signal), respectively. Furthermore, Raman spectroscopy was used to characterize the interaction between polysaccharide and carbon counterparts. Methotrexate was physically loaded onto the nanohybrid and the release profiles showed a pH-responsive behavior with higher and faster release in acidic (pH 5.0) vs. neutral (pH 7.4) environments. Empty nanoparticles were found to be highly biocompatible in either healthy (MRC-5) or cancerous (H1299) cells, with the nanocarrier being effective in reducing the drug toxicity on MRC-5 while enhancing the anticancer activity on H1299.

Design and evaluation of mesenchymal stem cells seeded chitosan/glycosaminoglycans quaternary hydrogel scaffolds for wound healing applications

The main goal of this study was the design, development and characterization of a chitosan based scaffolding substrate including three glycosaminoglycans and collagen to provide an optimal microenvironment for human mesemchymal stem cells isolated from adipose tissue (hMSCs). Chitosan scaffolds provide a moist wound environment which promotes healing and epidermal regeneration. Furthermore, the importance of extracellular molecules such as glycosaminoglycans in wound healing makes them essential ingredients in these types of formulations. The physical properties of hydrogels scaffolds and stability were investigated. The scaffolds were evaluated by structural and microscopic assays, as well as cell culture analyses. The hydrogel with best suitable properties was selected as candidate scaffold for hMSCs encapsulation. The viability of hMSCs remained above 75%, indicating good cell viability. The number of living hMSCs in the scaffold reached a steady state up to ~100% at days 5 and 7. Scanning electron microscopy showed irregular compartments with the presence of the hMSCs. These findings indicated that our hydrogel scaffold provided a suitable niche for cell viability which could be considered a promising candidate for further in vivo studies.

Chitosan/glyphosate formulation as a potential, environmental friendly herbicide with prolonged activity

Although there are many reports on the dangers posed by glyphosate, this herbicide is still one of the most popular and widely used total weed killers. Therefore, great effort should be made to minimize exposure to this herbicide and limit its losses into the environment. The aim of this study was to prepare a new formulation consisted of various molecular weight chitosans with glyphosate and their evaluation toward active substance release, phytotoxicity, and preliminary herbicidal efficiency. The phytotoxicity study of the obtained chitosan/glyphosate formulations was determined based on the Organisation for Economic Co-operation and Development 208 guideline. Among all tested formulations evaluated for phytotoxicity, that containing the highest molecular weight of chitosan was found to be the least toxic, showing simultaneously the most effective herbicidal activity against selected weeds. The release rate of glyphosate from the obtained formulations was dependent on the molecular weight and viscosity of chitosan.

Fabrication of Stable Nanofiber Matrices for Tissue Engineering via Electrospinning of Bare Laser-Synthesized Au Nanoparticles in Solutions of High Molecular Weight Chitosan

We report a methodology for the fabrication of neutralized chitosan-based nanofiber matrices decorated with bare Au nanoparticles, which demonstrate stable characteristics even after prolonged contact with a biological environment. The methodology consists of electrospinning of a mixture of bare (ligand-free) laser-synthesized Au nanoparticles (AuNPs) and solutions of chitosan/polyethylene oxide (ratio 1/3) containing chitosan of a relatively high molecular weight (200 kDa) and concentration of 3% (w/v). Our studies reveal a continuous morphology of hybrid nanofibers with the mean fiber diameter of 189 nm ± 86 nm, which demonstrate a high thermal stability. Finally, we describe a protocol for the neutralization of nanofibers, which enabled us to achieve their structural stability in phosphate-buffered saline (PBS) for more than six months, as confirmed by microscopy and FTIR measurements. The formed hybrid nanofibers exhibit unique physicochemical properties essential for the development of future tissue engineering platforms.

Hyaluronic acid and chitosan-based nanosystems: a new dressing generation for wound care

INTRODUCTION

The main goal in the management of chronic wounds is the development of multifunctional dressings able to promote a rapid recovery of skin structure and function, improving patient compliance.

AREAS COVERED

This review discusses the use of nanosystems, based on hyaluronic acid and chitosan or their derivatives for the local treatment of chronic wounds. The bioactive properties of both polysaccharides will be described, as well as the results obtained in the last decade by the in vitro and in vivo evaluation of the wound healing properties of nanosystems based on such polymers.

EXPERT OPINION

In the last decades, there has been a progressive change in the local treatments of chronic wounds: traditional inert dressings have been replaced by more effective bioactive ones, based on biopolymers taking part in wound healing and able to release the loaded active agents in a controlled way. With the advance of nanotechnologies, the scenario has further changed: nanosystems, characterized by a large area-to-volume ratio, show an improved interaction with the biological substrates, amplifying the activity of the constituent biopolymers. In the coming years, a deeper insight into wound healing mechanisms and the development of new techniques for nanosystem manufacturing will results in the design of new scaffolds with improved performance.

Tuning the Electrical Properties of Electrospun Nanofibers with Hybrid Nanomaterials for Detecting Isoborneol in Water Using an Electronic Tongue

The presence of contaminants in water is a subject of paramount importance nowadays, which can make water improper to human consumption even when these contaminants are present at very low concentrations, causing health issues and economic losses. In this work, we evaluated the performance of nanocomposites based on nylon 6,6/chitosan electrospun nanofibers modified by cellulose nanowhiskers combined with functional materials like silver nanoparticles, gold nanoparticles, and reduced graphene oxide to be used as sensing layers of an electronic tongue (e-tongue) to detect Isoborneol. This compound, found in some plants and essential oils, is used as a natural repellent and also to produce many other chemicals. Additionally, its chemical structure is related to that of 2-methylisoborneol, a critical pollutant in aqueous media. The synergism between the nanomaterials combined with electrospun nanofibers could be verified by the enhancement of the charge transference ability. Additionally, electrical capacitance data measured with the impedimetric e-tongue were treated by Principal Component Analysis (PCA), and revealed the sensing system was able to discriminate samples contaminated with Isoborneol at nanomolar concentrations. Moreover, the electronic tongue system could detect Isoborneol in real water samples under different concentrations.

Conducting Polymeric Nanocomposites with a Three-Dimensional Co-flow Microfluidics Platform

The nanoprecipitation of polymers is of great interest in biological and medicinal applications. Many approaches are available, but few generalized methods can fabricate structurally different biocompatible polymers into nanosized particles with a narrow distribution in a high-throughput manner. We simply integrate a glass slide, capillary, and metal needle into a simple microfluidics device. Herein, a detailed protocol is provided for using the glass capillary and slides to fabricate the microfluidics devices used in this work. To demonstrate the generality of our nanoprecipitation approach and platform, four (semi)natural polymers—acetalated dextran (Ac-DEX), spermine acetalated dextran (Sp-Ac-DEX), poly(lactic-co-glycolic acid) (PLGA), and chitosan—were tested and benchmarked by the polymeric particle size and polydispersity. More importantly, the principal objective was to explore the influence of some key parameters on nanoparticle size due to its importance for a variety of applications. The polymer concentration, the solvent/non-solvent volume rate/ratio, and opening of the inner capillary were varied so as to obtain polymeric nanoparticles (NPs). Dynamic light scattering (DLS), transmission electron microscopy (TEM), and optical microscopy are the main techniques used to evaluate the nanoprecipitation output. It turns out that the concentration of polymer most strongly determines the particle size and distribution, followed by the solvent/non-solvent volume rate/ratio, whereas the opening of the inner capillary shows a minor effect. The obtained NPs were smooth spheres with adjustable particle diameters and polymer-dependent surface potentials, both negative and positive.

Gallic Acid-Chitosan Conjugate Inhibits the Formation of Calcium Oxalate Crystals

It has recently been shown that chitosan (Chit) induces the formation of calcium oxalate (CaOx) crystals, which are mainly responsible for the appearance of kidney stones, and this might limit the use of Chit in vivo. Here, Chit was conjugated with gallic acid (Chit-Gal) to decrease the formation of CaOx crystal. This conjugation was confirmed by FTIR and NMR analyses. Chit-Gal contains 10.2 ± 1.5 mg GA per g of Chit. Compared to the control group, Chit increased the number of crystals by six-fold, mainly in the number of monohydrated CaOx crystals, which are the most harmful CaOx crystals. In addition, Chit increased the zeta potential (ζ) of CaOx crystals by three-fold, indicating that Chit was associated with the crystals. These alterations were abolished when Chit-gal was used in these tests. As oxidative stress is related to renal calculus formation, Chit and Chit-Gal were also evaluated as antioxidants using total antioxidant Capacity (TAC), reducing power, ferrous chelation, and copper chelation tests. Chit-gal was more efficient antioxidant agent in TAC (2 times), in ferrous chelation (90 times), and in reducing Power (5 times) than Chit. Overall, Chit-gal has higher antioxidant activity than Chit, does not induce the formation of CaOx crystals. Thus, Chit-Gal has potential to be used as a chit substitute.

Chitosan-Based Nanocarriers for Nose to Brain Delivery

In the treatment of brain diseases, most potent drugs that have been developed exhibit poor therapeutic outcomes resulting from the inability of a therapeutic amount of the drug to reach the brain. These drugs do not exhibit targeted drug delivery mechanisms, resulting in a high concentration of the drugs in vital organs leading to drug toxicity. Chitosan (CS) is a natural-based polymer. It has unique properties such as good biodegradability, biocompatibility, mucoadhesive properties, and it has been approved for biomedical applications. It has been used to develop nanocarriers for brain targeting via intranasal administration. Nanocarriers such as nanoparticles, in situ gels, nanoemulsions, and liposomes have been developed. In vitro and in vivo studies revealed that these nanocarriers exhibited enhanced drug uptake to the brain with reduced side effects resulting from the prolonged contact time of the nanocarriers with the nasal mucosa, the surface charge of the nanocarriers, the nano size of the nanocarriers, and their capability to stretch the tight junctions within the nasal mucosa. The aforementioned unique properties make chitosan a potential material for the development of nanocarriers for targeted drug delivery to the brain. This review will focus on chitosan-based carriers for brain targeting.

Grafting of chitosan-acrylamide hybrid on the wool: Characterization, reactive dyeing, antioxidant and antibacterial studies

This study presents a new approach to enhance reactive dye uptake and functional finishing of wool yarns via simple grafting with synthesized chitosan-acrylamide (Ch-Ac) hybrid. To this, Ch-Ac was synthesized and characterized with fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. Then, Ch-Ac was grafted on wool, characterized with FTIR, SEM, and weight gain analysis and dyeability with two commercial reactive dyes. Results showed that Ch-Ac treated wool could be dyed at lower temperatures (ca. 40 °C), times (ca. 30 min), and amount of reactive dye (2% owf) as compared to raw wool. Also, deeper shades not obtainable in conventional dyeing could be attained using Ch-Ac treated wool. In addition, Ch-Ac treatment imparted very good radical scavenging and excellent antibacterial activity against gram-negative (E. coli) and gram-positive (S. aureus) bacteria. Color fastness results confirmed that Ch-Ac treatment had no adverse effect on durability of dyes against washing, light, rubbing and perspiration. The results of this study clearly indicated that Ch-Ac can be used in eco-friendly functional finishing of wool with enhanced reactive dye uptake, minimized residual dye in wastewater, saving in consumption of chemicals, energy, and time of dyeing.

Chitin extraction from shrimp waste by liquid fermentation using an alkaline protease-producing strain, Brevibacillus parabrevis

In this study, an extracellular protease, but no chitinolytic enzyme-producing strain, Brevibacillus parabrevis TKU046, has been isolated and analyzed for the deproteinization testing of shrimp waste by liquid fermentation. Deproteinization assays of shrimp waste with this microbe showed 95% protein removal after 4 days fermentation. The efficiency of chitin extraction by B. parabrevis TKU046 on wastes of three shrimp species were also investigated in which the highest deproteinization was found on cooked tiger shrimp shell. Infrared spectra (IR) of the obtained chitin displayed characteristic profiles for chitin. The culture supernatant released after fermentation greatly exhibited growth enhancing effect on Lactobacillus rhamnosus. In addition, B. parabrevis TKU046 protease was isolated and determined the characteristics. The molecular mass of B. parabrevis TKU046 protease was determined as 32 kDa and 34 kDa, respectively, by SDS-PAGE and HPLC. Overall, the findings provide strong support for the potential candidacy of this enzyme as an effective and eco-friendly alternative to the conventional chemicals used for the deproteinization of shrimp heads in the chitin processing industry, as well as the production of prebiotics to be used in the nutraceutical industry.

Antilisterial Activity of Polypropylene Film Coated with Chitosan with Propolis and/or Bee Pollen in Food Models

The aim of the study was to evaluate the effect of propylene film coated with solution of chitosan (CH), ethanolic extracts of propolis (EEP), and bee pollen (EEBP) and its combination on L. monocytogenes number in wrapped salmon, salami, and cheese. Sterile fragments of propylene film were coated with solution containing CH, CH+EEP, CH+EEBP, and CH+EEP+EEBP. The coated film was applied directly after preparation (AP) after 10 days of storage from preparation (AS). L. monocytogenes strains isolated from cheese, salmon, and salami were transferred on adequate food type. ATCC 19111 reference strain was placed on all examined slices. Contaminated slices were wrapped in the coated film. The film adhered strictly to the slices surface and was left for 0, 1, 6, 12, and 24 hours. Antilisterial activity of AP film was additionally assessed during 15-day storage of products wrapped in the coated film. In conclusion, the chitosan-coated film exhibited antibacterial activity. Incorporation of EPP and EEBP enhanced this activity. The antilisterial activity depended on the type and concentration of solutions, the types of food, and the origin of strains. This study proved that the time that passed since the use of coated film for packing food was of great importance.

Chitosan-Coated Nanoparticles: Effect of Chitosan Molecular Weight on Nasal Transmucosal Delivery

Drug delivery to the brain represents a challenge, especially in the therapy of central nervous system malignancies. Simvastatin (SVT), as with other statins, has shown potential anticancer properties that are difficult to exploit in the central nervous system (CNS). In the present work the physico⁻chemical, mucoadhesive, and permeability-enhancing properties of simvastatin-loaded poly-ε-caprolactone nanocapsules coated with chitosan for nose-to-brain administration were investigated. Lipid-core nanocapsules coated with chitosan (LNCchit) of different molecular weight (MW) were prepared by a novel one-pot technique, and characterized for particle size, surface charge, particle number density, morphology, drug encapsulation efficiency, interaction between surface nanocapsules with mucin, drug release, and permeability across two nasal mucosa models. Results show that all formulations presented adequate particle sizes (below 220 nm), positive surface charge, narrow droplet size distribution (PDI < 0.2), and high encapsulation efficiency. Nanocapsules presented controlled drug release and mucoadhesive properties that are dependent on the MW of the coating chitosan. The results of permeation across the RPMI 2650 human nasal cell line evidenced that LNCchit increased the permeation of SVT. In particular, the amount of SVT that permeated after 4 hr for nanocapsules coated with low-MW chitosan, high-MW chitosan, and control SVT was 13.9 ± 0.8 μg, 9.2 ± 1.2 µg, and 1.4 ± 0.2 µg, respectively. These results were confirmed by SVT ex vivo permeation across rabbit nasal mucosa. This study highlighted the suitability of LNCchit as a promising strategy for the administration of simvastatin for a nose-to-brain approach for the therapy of brain tumors.

Maximal Efficiency of PSII as a Marker of Sorghum Development Fertilized With Waste From a Biomass Biodigestion to Methane

The aim of experiments was to investigate a maximal efficiency of PSII, as a marker indicating growth, vigor, energetic value and physiological activity of sorghum fertilized with wastes from a biomass biodigestion to methane in a distillery integrated with a biogas plant using corn grains as substrate. The sorghum plants grown outdoor in different climate and in pots and in field were fertilized with different doses of the waste or Apol-humus - a soil improver and Stymjod - a nano-organic-mineral fertilizer. The maximal efficiency of PSII, in comparison with plant growth and health, chlorophyll content, gas exchange, activity of selected enzymes, element content in leaves and energetic value were studied. The wastes applied to soil resulted in increased maximal efficiency of PSII and the doses of 30 m3 ha-1 and 40-50 m3 ha-1 of the non-centrifuged and centrifuged ones, respectively, were most efficient. This enhancement was associated with the increased kinetics of plant growth, their health, fresh and dry biomass and physiological activity of plants as evidenced by activity of acid and alkaline phosphatase, RNase and dehydrogenase, as well as by gas exchange: net photosynthesis, transpiration, stomatal conductance, intercellular CO2 concentration and index of chlorophyll content in leaves. The fertilization with Apol-humus and Stymjod additionally increased maximal photochemical efficiency of PSII and plant development, biomass yield and physiological activity. The results indicate that waste from a biomass biodigestion to methane can be used as a natural fertilizer in sorghum crops and this ensures their recycling and environmental protection. The measurement values of maximal efficiency of PSII were proportionally to the vigor, growth and physiological activity of the plants. The obtained results indicate that the maximal efficiency of PSII in sorghum plants is a non-destructive method for defining the degree of growth and may be used as a marker of plant vigor and health, development and physiological activity expressed by gas exchange and activity of selected enzymes.

Chitosan/Poly(vinylpyrrolidone) Matrices Obtained by Gamma-Irradiation for Skin Scaffolds: Characterization and Preliminary Cell Response Studies

Several studies have shown that chitosan possesses characteristics favorable for promoting dermal regeneration and accelerated wound healing. In this work we have reported the work that has been done on the development and characterization of biocompatible and biodegradable chitosan based matrices to be used as skin scaffolds. Poly(vinylpyrrrolidone) (PVP) was used as copolymer and a two steps methodology of freeze-drying and gamma irradiation was used to obtain the porous matrices. The influence of PVP content, synthesis procedure and absorbed radiation dose on matrices’ physical, chemical and structural properties was evaluated by ATR-FTIR, TGA, SEM, contact angle measurements and degradation behavior. The in vitro cellular viability and proliferation of HFFF2 fibroblast cell line was analyzed as a measure of matrices’ biocompatibility and ability to assist skin regeneration. Results show that over the studied range values, gamma-radiation dose, copolymer concentration and synthesis procedure can be used to tailor the matrices’ morphology in terms of porosity and surface roughness. Early results from biological assays evidence the biocompatibility of the prepared chitosan/PVP matrices since cells adhered to the surface of all matrices (chitosan/PVP (5%) γ-irradiated at 10 kGy presents the higher cellular viability). These features show that the resultant matrices could be a potential suitable scaffold for skin tissue regeneration.