Recombineering: a homologous recombination-based method of genetic engineering

Zebrafish dmrta2 regulates the expression of cdkn2c in spermatogenesis in the adult testis

The exact function of the doublesex and mab-3 related transcription factor-like family a2 gene (dmrta2) has remained largely unknown possibly because of its functional redundancy with dmrta1 in most vertebrates. In this study, dmrta1 was demonstrated to likely be absent in the zebrafish genome, which facilitated our functional analysis of dmrta2 in this model organism. To analyze its gene function in embryos and adults, we generated a mutant form of Dmrta2 (R106Q, Dmrta2(RQ)) with its in vitro DNA-binding capacity abolished and a transgenic line for the inducible expression of this mutant Dmrta2(RQ) upon doxycycline (Dox) treatment. Preferential dmrta2 expression was detected in the developing brain during embryogenesis and in the adult testis. During embryogenesis, Dmrta2(RQ) expression caused severe embryonic development defects and dramatic expression changes of two telencephalic marker genes, fibroblast growth factor 8a (fgf8a), and empty spiracles homolog 1 (emx1). In adults, the inducible Dmrta2(RQ) expression occurred specifically in the adult testis and recapitulated the endogenous dmrta2 expression in this organ. Intriguingly, adult males expressing dmrta2(RQ) showed normal spermatogenesis and were fertile, but the expression of cyclin-dependent kinase inhibitor 2C (cdkn2c), which is evolutionarily clustered with dmrta2, was significantly suppressed during spermatogenesis. Further protein-binding and promoter mutation analysis indicated that a putative Dmrta2-binding site on the cdkn2c promoter was required for sustaining the normal expression of cdkn2c during zebrafish spermatogenesis, suggesting that Dmrta2 might regulate the expression of cdkn2c.

A simplified counter-selection recombineering protocol for creating fluorescent protein reporter constructs directly from C. elegans fosmid genomic clones

BACKGROUND

Recombineering is a genetic engineering tool that enables facile modification of large episomal clones, e.g. BACs, fosmids. We have previously adapted this technology to generate, directly from fosmid-based genomic clones, fusion gene reporter constructs designed to investigate gene expression patterns in C. elegans. In our adaptation a rpsL-tet(A) positive/negative-selection cassette (RT-cassette) is first inserted and then, under negative selection, seamlessly replaced with the desired sequence. We report here on the generation and application of a resource comprising two sets of constructs designed to facilitate this particular recombineering approach.

RESULTS

Two complementary sets of constructs were generated. The first contains different fluorescent protein reporter coding sequences and derivatives while the second set of constructs, based in the copy-number inducible vector pCC1Fos, provide a resource designed to simplify RT-cassette-based recombineering. These latter constructs are used in pairs the first member of which provides a template for PCR-amplification of an RT-cassette while the second provides, as an excised restriction fragment, the desired fluorescent protein reporter sequence. As the RT-cassette is flanked by approximately 200 bp from the ends of the reporter sequence the subsequent negative selection replacement step is highly efficient. Furthermore, use of a restriction fragment minimizes artefacts negating the need for final clone sequencing. Utilizing this resource we generated single-, double- and triple-tagged fosmid-based reporters to investigate expression patterns of three C. elegans genes located on a single genomic clone.

CONCLUSIONS

We describe the generation and application of a resource designed to facilitate counter-selection recombineering of fosmid-based C. elegans genomic clones. By choosing the appropriate pair of 'insertion' and 'replacement' constructs recombineered products, devoid of artefacts, are generated at high efficiency. Gene expression patterns for three genes located on the same genomic clone were investigated via a set of fosmid-based reporter constructs generated with the modified protocol.

Recombineering: highly efficient in vivo genetic engineering using single-strand oligos

Recombineering provides the ability to make rapid, precise, and inexpensive genetic alterations to any DNA sequence, either in the chromosome or cloned onto a vector that replicates in E. coli (or other recombineering-proficient bacteria), and to do so in a highly efficient manner. Complicated genetic constructs that are impossible to make with in vitro genetic engineering can be created in days with recombineering. Recombineering with single-strand DNA (ssDNA) can be used to create single or multiple clustered point mutations, small or large (up to 10kb) deletions, and small (10-20 base) insertions such as sequence tags. Using optimized conditions, point mutations can be made with such high frequencies that they can be found without selection. This technology excels at creating both directed and random mutations.

Conventional murine gene targeting

Murine gene knockout models engineered over the last two decades have continued to demonstrate their potential as invaluable tools in understanding the role of gene function in the context of normal human development and disease. The more recent elucidation of the human and mouse genomes through sequencing has opened up the capability to elucidate the function of every human gene. State-of-the-art mouse model generation allows, through a multitude of experimental steps requiring careful standardization, gene function to be reliably and predictably ablated in a live model system. The application of these standardized methodologies to directly target gene function through murine gene knockout has to date provided comprehensive and verifiable genetic models that have contributed tremendously to our understanding of the cellular and molecular pathways underlying normal and disease states in humans. The ensuing chapter provides an overview of the latest steps and procedures required to ablate gene function in a murine model.

Screening and expression of genes from metagenomes

Microorganisms are the most abundant and widely spread organisms on earth. They colonize a huge variety of natural and anthropogenic environments, including very specialized ecological niches and even extreme habitats, which are made possible by the immense metabolic diversity and genetic adaptability of microbes. As most of the organisms from environmental samples defy cultivation, cultivation-independent metagenomics approaches have been applied since more than one decade to access and characterize the phylogenetic diversity in microbial communities as well as their metabolic potential and ecological functions. Thereby, metagenomics has fully emerged as an own scientific field for mining new biocatalysts for many industrially relevant processes in biotechnology and pharmaceutics. This review summarizes common metagenomic approaches ranging from sampling, isolation of nucleic acids, construction of metagenomic libraries and their evaluation. Sequence-based screenings implement next-generation sequencing platforms, microarrays or PCR-based methods, while function-based analysis covers heterologous expression of metagenomic libraries in diverse screening setups. Major constraints and advantages of each strategy are described. The importance of alternative host-vector systems is discussed, and in order to underline the role of phylogenetic and physiological distance from the gene donor and the expression host employed, a case study is presented that describes the screening of a genomic library from an extreme thermophilic bacterium in both Escherichia coli and Thermus thermophilus. Metatranscriptomics, metaproteomics and single-cell-based methods are expected to complement metagenomic screening efforts to identify novel biocatalysts from environmental samples.

Constructing unmarked gene deletions in Legionella pneumophila

The ability to construct recombinant alleles efficiently in strains of interest, particularly unmarked deletions that reduce the potential for polar effects, is essential to studies of both pathogenesis and basic bacterial physiology. Here we describe a three-phase approach for generating unmarked deletions in Legionella pneumophila by constructing a mutant allele in E. coli using λ-Red recombination, so-called recombineering; transferring the allele onto the L. pneumophila chromosome by natural transformation; and then removing the selectable marker by utilizing the Flp site-specific recombinase. This strategy can decrease the amount of clone screening required while also increasing the percentage of the time the desired allele is obtained on the first attempt. The approach is particularly suited for constructing multiple unmarked deletions in a single strain in fewer steps than traditional methods.

Trackable multiplex recombineering for gene-trait mapping in E. coli

Recent advances in homologous recombination in Escherichia coli have enabled improved genome engineering by multiplex recombineering. In this chapter, we present trackable multiplex recombineering (TRMR), a method for gene-trait mapping which creates simulated knockdown and overexpression mutants for virtually all genes in the E. coli genome. The method combines oligonucleotide synthesis with multiplex recombineering to create two libraries comprising of over 8,000 E. coli strains in total that can be selected for traits of interest via high-throughput screening or selection. DNA barcodes included in the recombineering cassette allow for rapid characterization of a naïve or selected population via DNA microarray analysis. Important considerations for oligonucleotide design, DNA library construction, recombineering, strain characterization, and selection are discussed.

Engineering of large deletions and duplications in vivo

Gene targeting in embryonic stem (ES) cells coupled with the site-specific Cre/loxP recombination system offers unique opportunities to identify and analyze the roles of cis-acting sequences in the regulation of imprinted gene expression. Although several different approaches have been described to engineer large chromosomal rearrangements in ES cells, these strategies can be labor-intensive and often require several subcloning of the original stem cells, therefore limiting the chances of obtaining germ line transmission of the mutation introduced. Here we describe an alternative approach which is based on in vivo recombination, therefore limiting the number of steps performed in ES cells and allowing to take advantage of the growing number of loxP insertional mutations already available in transgenic mice.

Tuning promoter strength through RNA polymerase binding site design in Escherichia coli

One of the paramount goals of synthetic biology is to have the ability to tune transcriptional networks to targeted levels of expression at will. As a step in that direction, we have constructed a set of 18 unique binding sites for E. coli RNA Polymerase (RNAP) δ⁷⁰ holoenzyme, designed using a model of sequence-dependent binding energy combined with a thermodynamic model of transcription to produce a targeted level of gene expression. This promoter set allows us to determine the correspondence between the absolute numbers of mRNA molecules or protein products and the predicted promoter binding energies measured in k(B)T energy units. These binding sites adhere on average to the predicted level of gene expression over 3 orders of magnitude in constitutive gene expression, to within a factor of 3 in both protein and mRNA copy number. With these promoters in hand, we then place them under the regulatory control of a bacterial repressor and show that again there is a strict correspondence between the measured and predicted levels of expression, demonstrating the transferability of the promoters to an alternate regulatory context. In particular, our thermodynamic model predicts the expression from our promoters under a range of repressor concentrations between several per cell up to over 100 per cell. After correcting the predicted polymerase binding strength using the data from the unregulated promoter, the thermodynamic model accurately predicts the expression for the simple repression strains to within 30%. Demonstration of modular promoter design, where parts of the circuit (such as RNAP/TF binding strength and transcription factor copy number) can be independently chosen from a stock list and combined to give a predictable result, has important implications as an engineering tool for use in synthetic biology.

Captured segment exchange: a strategy for custom engineering large genomic regions in Drosophila melanogaster

Site-specific recombinases (SSRs) are valuable tools for manipulating genomes. In Drosophila, thousands of transgenic insertions carrying SSR recognition sites have been distributed throughout the genome by several large-scale projects. Here we describe a method with the potential to use these insertions to make custom alterations to the Drosophila genome in vivo. Specifically, by employing recombineering techniques and a dual recombinase-mediated cassette exchange strategy based on the phiC31 integrase and FLP recombinase, we show that a large genomic segment that lies between two SSR recognition-site insertions can be "captured" as a target cassette and exchanged for a sequence that was engineered in bacterial cells. We demonstrate this approach by targeting a 50-kb segment spanning the tsh gene, replacing the existing segment with corresponding recombineered sequences through simple and efficient manipulations. Given the high density of SSR recognition-site insertions in Drosophila, our method affords a straightforward and highly efficient approach to explore gene function in situ for a substantial portion of the Drosophila genome.

Phage recombinases and their applications

The homologous recombination systems of linear double-stranded (ds)DNA bacteriophages are required for the generation of genetic diversity, the repair of dsDNA breaks, and the formation of concatemeric chromosomes, the immediate precursor to packaging. These systems have been studied for decades as a means to understand the basic principles of homologous recombination. From the beginning, it was recognized that these recombinases are linked intimately to the mechanisms of phage DNA replication. In the last decade, however, investigators have exploited these recombination systems as tools for genetic engineering of bacterial chromosomes, bacterial artificial chromosomes, and plasmids. This recombinational engineering technology has been termed "recombineering" and offers a new paradigm for the genetic manipulation of bacterial chromosomes, which is far more efficient than the classical use of nonreplicating integration vectors for gene replacement. The phage λ Red recombination system, in particular, has been used to construct gene replacements, deletions, insertions, inversions, duplications, and single base pair changes in the Escherichia coli chromosome. This chapter discusses the components of the recombination systems of λ, rac prophage, and phage P22 and properties of single-stranded DNA annealing proteins from these and other phage that have been instrumental for the development of this technology. The types of genetic manipulations that can be made are described, along with proposed mechanisms for both double-stranded DNA- and oligonucleotide-mediated recombineering events. Finally, the impact of this technology to such diverse fields as bacterial pathogenesis, metabolic engineering, and mouse genomics is discussed.

Production of recombineering substrates with standard-size PCR primers

Recombineering is a powerful method for DNA manipulation. It has advantages over restriction endonuclease-based methods and is usually rapid. Typically, recombineering uses long PCR primers (c. 65 bases), each of which contains a small region of target homology (c. 45 bases). We have developed a simple, albeit somewhat less rapid, strategy to create recombineering substrates that can use primers of ≤ 35 bases for all steps. The regions of homology can be several hundred base pairs in length to (1) increase the chance of obtaining the desired clone and/or (2) allow coliphage-based recombineering in some non-Escherichia coli bacteria. The method uses cloning techniques to construct a template for the generation of the recombineering substrate. Because the template is made from cloned DNA segments, the segments (including those for the homology regions) can be readily changed. During construction of the template plasmid, potential background transformants arising from the vector without insert are significantly reduced by cloning each segment with two restriction endonucleases that produce noncompatible ends. We have used this method to change the bla gene of pACYC177 to aadA, to add the MCS-lacZα region from pBBR1MCS to IncQ plasmid vectors, and to make an oriT(IncP) -aacC1 cassette and add it to a plasmid.

New yeast/E. coli/Drosophila triple shuttle vectors for efficient generation of Drosophila P element transformation constructs

We have generated a set of novel triple shuttle vectors that facilitate the construction of Drosophila-P-element transformations vectors. These YED-vectors allow the insertion of any kind of sequence at any chosen position due to the presence of a yeast casette which ensures replication and allows for homologous recombination in Saccharomyces cerevisiae. As a proof of principle we generated several reporter constructs and tested them in transgenic flies for expression and correct subcellular localization. YED-vectors can be used for many purposes including promoter analysis or the expression of tagged or truncated proteins. Thus, time-consuming conventional restriction site based multi-step cloning procedures can be circumvented by using the new YED-vectors. The new set of triple shuttle vectors will be highly beneficial for the rapid construction of complex Drosophila transformation plasmids.

Improving lambda red genome engineering in Escherichia coli via rational removal of endogenous nucleases

Lambda Red recombineering is a powerful technique for making targeted genetic changes in bacteria. However, many applications are limited by the frequency of recombination. Previous studies have suggested that endogenous nucleases may hinder recombination by degrading the exogenous DNA used for recombineering. In this work, we identify ExoVII as a nuclease which degrades the ends of single-stranded DNA (ssDNA) oligonucleotides and double-stranded DNA (dsDNA) cassettes. Removing this nuclease improves both recombination frequency and the inheritance of mutations at the 3′ ends of ssDNA and dsDNA. Extending this approach, we show that removing a set of five exonucleases (RecJ, ExoI, ExoVII, ExoX, and Lambda Exo) substantially improves the performance of co-selection multiplex automatable genome engineering (CoS-MAGE). In a given round of CoS-MAGE with ten ssDNA oligonucleotides, the five nuclease knockout strain has on average 46% more alleles converted per clone, 200% more clones with five or more allele conversions, and 35% fewer clones without any allele conversions. Finally, we use these nuclease knockout strains to investigate and clarify the effects of oligonucleotide phosphorothioation on recombination frequency. The results described in this work provide further mechanistic insight into recombineering, and substantially improve recombineering performance.

Rates of gyrase supercoiling and transcription elongation control supercoil density in a bacterial chromosome

Gyrase catalyzes negative supercoiling of DNA in an ATP-dependent reaction that helps condense bacterial chromosomes into a compact interwound "nucleoid." The supercoil density (σ) of prokaryotic DNA occurs in two forms. Diffusible supercoil density (σ(D)) moves freely around the chromosome in 10 kb domains, and constrained supercoil density (σ(C)) results from binding abundant proteins that bend, loop, or unwind DNA at many sites. Diffusible and constrained supercoils contribute roughly equally to the total in vivo negative supercoil density of WT cells, so σ = σ(C)+σ(D). Unexpectedly, Escherichia coli chromosomes have a 15% higher level of σ compared to Salmonella enterica. To decipher critical mechanisms that can change diffusible supercoil density of chromosomes, we analyzed strains of Salmonella using a 9 kb "supercoil sensor" inserted at ten positions around the genome. The sensor contains a complete Lac operon flanked by directly repeated resolvase binding sites, and the sensor can monitor both supercoil density and transcription elongation rates in WT and mutant strains. RNA transcription caused (-) supercoiling to increase upstream and decrease downstream of highly expressed genes. Excess upstream supercoiling was relaxed by Topo I, and gyrase replenished downstream supercoil losses to maintain an equilibrium state. Strains with TS gyrase mutations growing at permissive temperature exhibited significant supercoil losses varying from 30% of WT levels to a total loss of σ(D) at most chromosome locations. Supercoil losses were influenced by transcription because addition of rifampicin (Rif) caused supercoil density to rebound throughout the chromosome. Gyrase mutants that caused dramatic supercoil losses also reduced the transcription elongation rates throughout the genome. The observed link between RNA polymerase elongation speed and gyrase turnover suggests that bacteria with fast growth rates may generate higher supercoil densities than slow growing species.

A novel plasmid vector designed for chromosomal gene integration and expression: use for developing a genetically stable Escherichia coli melanin production strain

Recombinant Escherichia coli strains for the production of valuable products are usually generated by transformation with plasmid expression vectors. However, in spite of their usefulness, common problems associated with plasmid use include segregrational and structural instability as well as undesired copy-number effects. A viable alternative to plasmid use is chromosomal gene integration. With the purpose of facilitating the process of stable strain generation, a novel chromosomal integration vector was developed and tested. We describe the construction and use of novel expression vector pLoxGentrc that contains the strong trc promoter (P(trc)), a multiple cloning site, the T1 and T2 rrnB terminator sequences, the lacI(q) gene and the aacC1 gene conferring gentamicin resistance flanked by two loxP sites. As a demonstration of utility, melanin-producing strains of E. coli were generated employing this vector. Melanin is a polymer synthesized by the enzyme tyrosinase using l-tyrosine as substrate. The melA gene encoding a tyrosinase from Rhizobium etli was ligated to pLoxGentrc to generate pLoxGentrcmelA. This plasmid was transformed into E. coli W3110 to generate a melanin-producing strain. A region from this plasmid including P(trc)melA, T1 and T2 rrnB and the aacC1 gene was amplified by PCR employing primers with 45 b regions of homology to the lacZ gene. The PCR product was electroporated into strain W3110 that expressed the λ-Red enzymes. From this experiment, strain W3110P(tr)(c)melA, was obtained having the melA gene inserted in the lacZ locus. Fermentor cultures with strain W3110/pLoxGentrcmelA grown in the presence and absence of gentamicin as well as W3110P(tr)(c)melA without antibiotic revealed that the latter displays high genetic stability as well as the highest melanin titer. Vector pLoxGentrc should be useful during strain generation processes, enabling direct comparison of plasmid and chromosome-based production systems.

A novel chimpanzee adenovirus vector with low human seroprevalence: improved systems for vector derivation and comparative immunogenicity

Recombinant adenoviruses are among the most promising tools for vaccine antigen delivery. Recently, the development of new vectors has focused on serotypes to which the human population is less exposed in order to circumvent pre-existing anti vector immunity. This study describes the derivation of a new vaccine vector based on a chimpanzee adenovirus, Y25, together with a comparative assessment of its potential to elicit transgene product specific immune responses in mice. The vector was constructed in a bacterial artificial chromosome to facilitate genetic manipulation of genomic clones. In order to conduct a fair head-to-head immunological comparison of multiple adenoviral vectors, we optimised a method for accurate determination of infectious titre, since this parameter exhibits profound natural variability and can confound immunogenicity studies when doses are based on viral particle estimation. Cellular immunogenicity of recombinant E1 E3-deleted vector ChAdY25 was comparable to that of other species E derived chimpanzee adenovirus vectors including ChAd63, the first simian adenovirus vector to enter clinical trials in humans. Furthermore, the prevalence of virus neutralizing antibodies (titre >1:200) against ChAdY25 in serum samples collected from two human populations in the UK and Gambia was particularly low compared to published data for other chimpanzee adenoviruses. These findings support the continued development of new chimpanzee adenovirus vectors, including ChAdY25, for clinical use.

Proteins and DNA elements essential for the CRISPR adaptation process in Escherichia coli

The clustered regularly interspaced short palindromic repeats and their associated proteins (CRISPR/Cas) constitute a recently identified prokaryotic defense mechanism against invading nucleic acids. Activity of the CRISPR/Cas system comprises of three steps: (i) insertion of alien DNA sequences into the CRISPR array to prevent future attacks, in a process called 'adaptation', (ii) expression of the relevant proteins, as well as expression and processing of the array, followed by (iii) RNA-mediated interference with the alien nucleic acid. Here we describe a robust assay in Escherichia coli to explore the hitherto least-studied process, adaptation. We identify essential genes and DNA elements in the leader sequence and in the array which are essential for the adaptation step. We also provide mechanistic insights on the insertion of the repeat-spacer unit by showing that the first repeat serves as the template for the newly inserted repeat. Taken together, our results elucidate fundamental steps in the adaptation process of the CRISPR/Cas system.

Persistence of transferable extended-spectrum-β-lactamase resistance in the absence of antibiotic pressure

The treatment of infections caused by antibiotic-resistant bacteria is one of the great challenges faced by clinicians in the 21st century. Antibiotic resistance genes are often transferred between bacteria by mobile genetic vectors called plasmids. It is commonly believed that removal of antibiotic pressure will reduce the numbers of antibiotic-resistant bacteria due to the perception that carriage of resistance imposes a fitness cost on the bacterium. This study investigated the ability of the plasmid pCT, a globally distributed plasmid that carries an extended-spectrum-β-lactamase (ESBL) resistance gene (bla(CTX-M-14)), to persist and disseminate in the absence of antibiotic pressure. We investigated key attributes in plasmid success, including conjugation frequencies, bacterial-host growth rates, ability to cause infection, and impact on the fitness of host strains. We also determined the contribution of the bla(CTX-M-14) gene itself to the biology of the plasmid and host bacterium. Carriage of pCT was found to impose no detectable fitness cost on various bacterial hosts. An absence of antibiotic pressure and inactivation of the antibiotic resistance gene also had no effect on plasmid persistence, conjugation frequency, or bacterial-host biology. In conclusion, plasmids such as pCT have evolved to impose little impact on host strains. Therefore, the persistence of antibiotic resistance genes and their vectors is to be expected in the absence of antibiotic selective pressure regardless of antibiotic stewardship. Other means to reduce plasmid stability are needed to prevent the persistence of these vectors and the antibiotic resistance genes they carry.

Genome-wide manipulations of Drosophila melanogaster with transposons, Flp recombinase, and ΦC31 integrase

Transposable elements, the Flp recombinase, and the ΦC31 integrase are used in Drosophila melanogaster for numerous genome-wide manipulations. Often, their use is combined in a synergistic fashion to alter and engineer the fruit fly genome. Transposons are the foundation for all transgenic technologies in flies and hence almost all innovations in the fruit fly. They have been instrumental in the generation of genome-wide collections of insertions for gene disruption and manipulation. Many important transgenic strains of these collections are available from public repositories. The Flp protein is the most widely used recombinase to induce mitotic clones to study individual gene function. However, Flp has also been used to generate chromosome- and genome-wide collections of precise deletions, inversions, and duplications. Similarly, transposons that contain attP attachment sites for the ΦC31 integrase can be used for numerous applications. This integrase was incorporated into a transgenesis system that allows the integration of small to very large DNA fragments that can be easily manipulated through recombineering. This system allowed the creation of genomic DNA libraries for genome-wide gene manipulations and X chromosome duplications. Moreover, the attP sites are being used to create libraries of tens of thousands of RNAi constructs and tissue-specific GAL4 lines. This chapter focuses on genome-wide applications of transposons, Flp recombinase, and ΦC31 integrase that greatly facilitate experimental manipulation of Drosophila.

Strategy for directing combinatorial genome engineering in Escherichia coli

We describe a directed genome-engineering approach that combines genome-wide methods for mapping genes to traits [Warner JR, Reeder PJ, Karimpour-Fard A, Woodruff LBA, Gill RT (2010) Nat Biotechnol 28:856-862] with strategies for rapidly creating combinatorial ribosomal binding site (RBS) mutation libraries containing billions of targeted modifications [Wang HH, et al. (2009) Nature 460:894-898]. This approach should prove broadly applicable to various efforts focused on improving production of fuels, chemicals, and pharmaceuticals, among other products. We used barcoded promoter mutation libraries to map the effect of increased or decreased expression of nearly every gene in Escherichia coli onto growth in several model environments (cellulosic hydrolysate, low pH, and high acetate). Based on these data, we created and evaluated RBS mutant libraries (containing greater than 100,000,000 targeted mutations), targeting the genes identified to most affect growth. On laboratory timescales, we successfully identified a broad range of mutations (>25 growth-enhancing mutations confirmed), which improved growth rate 10-200% for several different conditions. Although successful, our efforts to identify superior combinations of growth-enhancing genes emphasized the importance of epistatic interactions among the targeted genes (synergistic, antagonistic) for taking full advantage of this approach to directed genome engineering.

Enhanced multiplex genome engineering through co-operative oligonucleotide co-selection

Genome-scale engineering of living organisms requires precise and economical methods to efficiently modify many loci within chromosomes. One such example is the directed integration of chemically synthesized single-stranded deoxyribonucleic acid (oligonucleotides) into the chromosome of Escherichia coli during replication. Herein, we present a general co-selection strategy in multiplex genome engineering that yields highly modified cells. We demonstrate that disparate sites throughout the genome can be easily modified simultaneously by leveraging selectable markers within 500 kb of the target sites. We apply this technique to the modification of 80 sites in the E. coli genome.

A PCR-free cloning method for the targeted φ80 Int-mediated integration of any long DNA fragment, bracketed with meganuclease recognition sites, into the Escherichia coli chromosome

The genetic manipulation of cells is the most promising strategy for designing microorganisms with desired traits. The most widely used approaches for integrating specific DNA-fragments into the Escherichia coli genome are based on bacteriophage site-specific and Red/ET-mediated homologous recombination systems. Specifically, the recently developed Dual In/Out integration strategy enables the integration of DNA fragments directly into specific chromosomal loci (Minaeva et al., 2008). To develop this strategy further, we designed a method for the precise cloning of any long DNA fragments from the E. coli chromosome and their targeted insertion into the genome that does not require PCR. In this method, the region of interest is flanked by I-SceI rare-cutting restriction sites, and the I-SceI-bracketed region is cloned into the unique I-SceI site of an integrative plasmid vector that then enables its targeted insertion into the E. coli chromosome via bacteriophage φ80 Int-mediated specialized recombination. This approach allows any long specific DNA fragment from the E. coli genome to be cloned without a PCR amplification step and reproducibly inserted into any chosen chromosomal locus. The developed method could be particularly useful for the construction of marker-less and plasmid-less recombinant strains in the biotechnology industry.

Single-cell census of mechanosensitive channels in living bacteria

Bacteria are subjected to a host of different environmental stresses. One such insult occurs when cells encounter changes in the osmolarity of the surrounding media resulting in an osmotic shock. In recent years, a great deal has been learned about mechanosensitive (MS) channels which are thought to provide osmoprotection in these circumstances by opening emergency release valves in response to membrane tension. However, even the most elementary physiological parameters such as the number of MS channels per cell, how MS channel expression levels influence the physiological response of the cells, and how this mean number of channels varies from cell to cell remain unanswered. In this paper, we make a detailed quantitative study of the expression of the mechanosensitive channel of large conductance (MscL) in different media and at various stages in the growth history of bacterial cultures. Using both quantitative fluorescence microscopy and quantitative Western blots our study complements earlier electrophysiology-based estimates and results in the following key insights: i) the mean number of channels per cell is much higher than previously estimated, ii) measurement of the single-cell distributions of such channels reveals marked variability from cell to cell and iii) the mean number of channels varies under different environmental conditions. The regulation of MscL expression displays rich behaviors that depend strongly on culturing conditions and stress factors, which may give clues to the physiological role of MscL. The number of stress-induced MscL channels and the associated variability have far reaching implications for the in vivo response of the channels and for modeling of this response. As shown by numerous biophysical models, both the number of such channels and their variability can impact many physiological processes including osmoprotection, channel gating probability, and channel clustering.

H-NS regulation of IraD and IraM antiadaptors for control of RpoS degradation

RpoS, the master sigma factor during stationary phase and under a variety of stress conditions, is regulated at multiple levels, including regulated degradation. Degradation is dependent upon ClpXP and the RssB adaptor protein. H-NS, a nucleoid-associated protein, affects the regulated degradation of RpoS; in the absence of H-NS, RpoS is stable. The mechanisms involved in this regulation were not known. We have found that H-NS inhibits the expression of iraD and iraM, the genes coding for two antiadaptor proteins that stabilize RpoS when overexpressed. The regulation by H-NS of iraM is independent from the previously demonstrated regulation by the PhoP/PhoQ two-component system. Moreover, differences in the behavior of several hns alleles are explained by a role for StpA, an H-NS-like protein, in the regulation of RpoS stability. This finding parallels recent observations for a role of StpA in regulation of RpoS stability in Salmonella.

The segregation of Escherichia coli minichromosomes constructed in vivo by recombineering

Circularized regions of the chromosome containing the origin of replication, oriC, can be maintained as autonomous minichromosomes, oriC plasmids. We show that oriC plasmids containing precise, pre-determined segments of the chromosome can be generated by a simple in vivo recombineering technique. We generated two such plasmids carrying fluorescent markers. These were transferred to a recipient strain with a different fluorescent marker near the chromosomal copy of oriC. Thus the fates of the oriC plasmid and chromosomal origins could be followed independently in living cells by fluorescence microscopy. In contrast to a previous report, we show that there is a strong tendency of oriC plasmid copies to accumulate at the cell center as a single or double focus at the plane of cell division. This is not simply due to exclusion from the nucleoid space but rather appears to be a specific recognition and retention of the plasmid by some central-located cell site.

Use of recombination-mediated genetic engineering for construction of rescue human cytomegalovirus bacterial artificial chromosome clones

Bacterial artificial chromosome (BAC) technology has contributed immensely to manipulation of larger genomes in many organisms including large DNA viruses like human cytomegalovirus (HCMV). The HCMV BAC clone propagated and maintained inside E. coli allows for accurate recombinant virus generation. Using this system, we have generated a panel of HCMV deletion mutants and their rescue clones. In this paper, we describe the construction of HCMV BAC mutants using a homologous recombination system. A gene capture method, or gap repair cloning, to seize large fragments of DNA from the virus BAC in order to generate rescue viruses, is described in detail. Construction of rescue clones using gap repair cloning is highly efficient and provides a novel use of the homologous recombination-based method in E. coli for molecular cloning, known colloquially as recombineering, when rescuing large BAC deletions. This method of excising large fragments of DNA provides important prospects for in vitro homologous recombination for genetic cloning.

Modelling human regulatory variation in mouse: finding the function in genome-wide association studies and whole-genome sequencing

An increasing body of literature from genome-wide association studies and human whole-genome sequencing highlights the identification of large numbers of candidate regulatory variants of potential therapeutic interest in numerous diseases. Our relatively poor understanding of the functions of non-coding genomic sequence, and the slow and laborious process of experimental validation of the functional significance of human regulatory variants, limits our ability to fully benefit from this information in our efforts to comprehend human disease. Humanized mouse models (HuMMs), in which human genes are introduced into the mouse, suggest an approach to this problem. In the past, HuMMs have been used successfully to study human disease variants; e.g., the complex genetic condition arising from Down syndrome, common monogenic disorders such as Huntington disease and β-thalassemia, and cancer susceptibility genes such as BRCA1. In this commentary, we highlight a novel method for high-throughput single-copy site-specific generation of HuMMs entitled High-throughput Human Genes on the X Chromosome (HuGX). This method can be applied to most human genes for which a bacterial artificial chromosome (BAC) construct can be derived and a mouse-null allele exists. This strategy comprises (1) the use of recombineering technology to create a human variant-harbouring BAC, (2) knock-in of this BAC into the mouse genome using Hprt docking technology, and (3) allele comparison by interspecies complementation. We demonstrate the throughput of the HuGX method by generating a series of seven different alleles for the human NR2E1 gene at Hprt. In future challenges, we consider the current limitations of experimental approaches and call for a concerted effort by the genetics community, for both human and mouse, to solve the challenge of the functional analysis of human regulatory variation.

Full-length 3'-untranslated region reporter construction with recombineering

Complexity in higher animals derives in part from various modalities of protein-coding gene expression regulation, including microRNA repression by binding to 3'-untranslated regions (UTRs) of specific genes. Reporter constructs containing candidate microRNA target sites are a popular approach of functional studies, and full-length 3'-UTR sequences are preferred because they contain all regulatory elements and preserve higher order structure as much as possible. However, this approach is often handicapped by the extreme length of the 3'-UTR. Here, we present a rapid and accurate cloning procedure to generate full-length 3'-UTR reporter constructs by recombinogenic engineering (recombineering) in vivo cloning. The approach includes making retrieval constructs by sequence- and ligation-independent cloning (SLIC) and retrieving the full-length 3'-UTR in one exon to the retrieval construct from a bacterial artificial chromosome (BAC) by recombineering to generate the final full-length 3'-UTR reporter construct for the gene of interest. This method is successfully implemented with mouse full-length 3'-UTRs of Igf1 (6.5 kb), Igf1r (7.5 kb), and Sp1 (5.5 kb). Expansion of this method is adaptable to retrieve 3'-UTRs encoded in more than one exon by removing the introns from the BAC first with recombineering. This method will advance functional studies of regulation of gene expression at the post-transcriptional level through microRNA suppression.

Production of artificial piRNAs in flies and mice

In animals a discrete class of small RNAs, the piwi-interacting RNAs (piRNAs), guard germ cell genomes against the activity of mobile genetic elements. piRNAs are generated, via an unknown mechanism, from apparently single-stranded precursors that arise from discrete genomic loci, termed piRNA clusters. Presently, little is known about the signals that distinguish a locus as a source of piRNAs. It is also unknown how individual piRNAs are selected from long precursor transcripts. To address these questions, we inserted new artificial sequence information into piRNA clusters and introduced these marked clusters as transgenes into heterologous genomic positions in mice and flies. Profiling of piRNA from transgenic animals demonstrated that artificial sequences were incorporated into the piRNA repertoire. Transgenic piRNA clusters are functional in non-native genomic contexts in both mice and flies, indicating that the signals that define piRNA generative loci must lie within the clusters themselves rather than being implicit in their genomic position. Comparison of transgenic animals that carry insertions of the same artificial sequence into different ectopic piRNA-generating loci showed that both local and long-range sequence environments inform the generation of individual piRNAs from precursor transcripts.

Using recombineering to generate point mutations: the oligonucleotide-based "hit and fix" method

Ability to manipulate the genome or design genes with desired mutation is critical for functional studies. Recombineering has made genetic manipulation of large genomic fragments very feasible and efficient. In the bacteriophage lambda-based recombineering system, three prophage genes, exo, bet, and gam, under the control of a temperature-sensitive lambda cI-repressor, provide the recombination function. The high efficiency of recombineering by oligonucleotides allows generation of subtle alterations in the bacterial chromosomal DNA as well as episomal DNA. We describe here a two-step "Hit and Fix" method, in which a short heterologous sequence is inserted to the target site first (Hit) and this sequence is replaced with the desired mutation in the second step (Fix). Insertion and replacement of the heterologous sequence allows screening of the recombinant clones by PCR or colony hybridization.

Genetic manipulation of poxviruses using bacterial artificial chromosome recombineering

Traditional methods for genetic manipulation of poxviruses rely on low-frequency natural recombination in virus-infected cells. Although these powerful systems represent the technical foundation of current knowledge and applications of poxviruses, they require long (≥ 500 bp) flanking sequences for homologous recombination, an efficient viral selection method, and burdensome, time-consuming plaque purification. The beginning of the twenty-first century has seen the application of bacterial artificial chromosome (BAC) technology to poxviruses as an alternative method for their genetic manipulation, following the invention of a long-sought-after method for deriving a BAC clone of vaccinia virus (VAC-BAC) by Arban Domi and Bernard Moss. The key advantages of the BAC system are the ease and versatility of performing genetic manipulation using bacteriophage λ Red recombination (recombineering), which requires only ∼50 bp homology arms that can be easily created by PCR, and which allows seamless mutations lacking any marker gene without having to perform transient-dominant selection. On the other hand, there are disadvantages, including the significant setup time, the risk of contamination of the cloned genome with bacterial insertion sequences, and the nontrivial issue of removal of the BAC cassette from derived viruses. These must be carefully weighed to decide whether the use of BACs will be advantageous for a particular application, making pox-BAC systems likely to complement, rather than supplant, traditional methods in most laboratories.

Transposon-mediated BAC transgenesis in zebrafish

Bacterial artificial chromosomes (BACs) are widely used in studies of vertebrate gene regulation and function because they often closely recapitulate the expression patterns of endogenous genes. Here we report a step-by-step protocol for efficient BAC transgenesis in zebrafish using the medaka Tol2 transposon. Using recombineering in Escherichia coli, we introduce the iTol2 cassette in the BAC plasmid backbone, which contains the inverted minimal cis-sequences required for Tol2 transposition, and a reporter gene to replace a target locus in the BAC. Microinjection of the Tol2-BAC and a codon-optimized transposase mRNA into fertilized eggs results in clean integrations in the genome and transmission to the germline at a rate of ∼15%. A single person can prepare a dozen constructs within 3 weeks, and obtain transgenic fish within approximately 3-4 months. Our protocol drastically reduces the labor involved in BAC transgenesis and will greatly facilitate biological and biomedical studies in model vertebrates.

Reversing bacterial resistance to antibiotics by phage-mediated delivery of dominant sensitive genes

Pathogen resistance to antibiotics is a rapidly growing problem, leading to an urgent need for novel antimicrobial agents. Unfortunately, development of new antibiotics faces numerous obstacles, and a method that resensitizes pathogens to approved antibiotics therefore holds key advantages. We present a proof of principle for a system that restores antibiotic efficiency by reversing pathogen resistance. This system uses temperate phages to introduce, by lysogenization, the genes rpsL and gyrA conferring sensitivity in a dominant fashion to two antibiotics, streptomycin and nalidixic acid, respectively. Unique selective pressure is generated to enrich for bacteria that harbor the phages carrying the sensitizing constructs. This selection pressure is based on a toxic compound, tellurite, and therefore does not forfeit any antibiotic for the sensitization procedure. We further demonstrate a possible way of reducing undesirable recombination events by synthesizing dominant sensitive genes with major barriers to homologous recombination. Such synthesis does not significantly reduce the gene's sensitization ability. Unlike conventional bacteriophage therapy, the system does not rely on the phage's ability to kill pathogens in the infected host, but instead, on its ability to deliver genetic constructs into the bacteria and thus render them sensitive to antibiotics prior to host infection. We believe that transfer of the sensitizing cassette by the constructed phage will significantly enrich for antibiotic-treatable pathogens on hospital surfaces. Broad usage of the proposed system, in contrast to antibiotics and phage therapy, will potentially change the nature of nosocomial infections toward being more susceptible to antibiotics rather than more resistant.

Evidence-based annotation of gene function in Shewanella oneidensis MR-1 using genome-wide fitness profiling across 121 conditions

Most genes in bacteria are experimentally uncharacterized and cannot be annotated with a specific function. Given the great diversity of bacteria and the ease of genome sequencing, high-throughput approaches to identify gene function experimentally are needed. Here, we use pools of tagged transposon mutants in the metal-reducing bacterium Shewanella oneidensis MR-1 to probe the mutant fitness of 3,355 genes in 121 diverse conditions including different growth substrates, alternative electron acceptors, stresses, and motility. We find that 2,350 genes have a pattern of fitness that is significantly different from random and 1,230 of these genes (37% of our total assayed genes) have enough signal to show strong biological correlations. We find that genes in all functional categories have phenotypes, including hundreds of hypotheticals, and that potentially redundant genes (over 50% amino acid identity to another gene in the genome) are also likely to have distinct phenotypes. Using fitness patterns, we were able to propose specific molecular functions for 40 genes or operons that lacked specific annotations or had incomplete annotations. In one example, we demonstrate that the previously hypothetical gene SO_3749 encodes a functional acetylornithine deacetylase, thus filling a missing step in S. oneidensis metabolism. Additionally, we demonstrate that the orphan histidine kinase SO_2742 and orphan response regulator SO_2648 form a signal transduction pathway that activates expression of acetyl-CoA synthase and is required for S. oneidensis to grow on acetate as a carbon source. Lastly, we demonstrate that gene expression and mutant fitness are poorly correlated and that mutant fitness generates more confident predictions of gene function than does gene expression. The approach described here can be applied generally to create large-scale gene-phenotype maps for evidence-based annotation of gene function in prokaryotes.

Many computationally predicted gene annotations in bacteria are incomplete or wrong. Consequently, experimental methods to systematically determine gene function in bacteria are required. Here, we describe a genetic approach to meet this challenge. We constructed a large transposon mutant library in the metal-reducing bacterium Shewanella oneidensis MR-1 and profiled the fitness of this collection in more than 100 diverse experimental conditions. In addition to identifying a phenotype for more than 2,000 genes, we demonstrate that mutant fitness profiles can be used to assign “evidence-based” gene annotations for enzymes, signaling proteins, transporters, and transcription factors, a subset of which we verify experimentally.

Towards artificial metallonucleases for gene therapy: recent advances and new perspectives

The process of DNA targeting or repair of mutated genes within the cell, induced by specifically positioned double-strand cleavage of DNA near the mutated sequence, can be applied for gene therapy of monogenic diseases. For this purpose, highly specific artificial metallonucleases are developed. They are expected to be important future tools of modern genetics. The present state of art and strategies of research are summarized, including protein engineering and artificial ‘chemical’ nucleases. From the results, we learn about the basic role of the metal ions and the various ligands, and about the DNA binding and cleavage mechanism. The results collected provide useful guidance for engineering highly controlled enzymes for use in gene therapy.

Systematic discovery of Rab GTPases with synaptic functions in Drosophila

BACKGROUND

Neurons require highly specialized intracellular membrane trafficking, especially at synapses. Rab GTPases are considered master regulators of membrane trafficking in all cells, and only very few Rabs have known neuron-specific functions. Here, we present the first systematic characterization of neuronal expression, subcellular localization, and function of Rab GTPases in an organism with a brain.

RESULTS

We report the surprising discovery that half of all Drosophila Rabs function specifically or predominantly in distinct subsets of neurons in the brain. Furthermore, functional profiling of the GTP/GDP-bound states reveals that these neuronal Rabs are almost exclusively active at synapses and the majority of these synaptic Rabs specifically mark synaptic recycling endosomal compartments. Our profiling strategy is based on Gal4 knockins in large genomic fragments that are additionally designed to generate mutants by ends-out homologous recombination. We generated 36 large genomic targeting vectors and transgenic rab-Gal4 fly strains for 25 rab genes. Proof-of-principle knockout of the synaptic rab27 reveals a sleep phenotype that matches its cell-specific expression.

CONCLUSIONS

Our findings suggest that up to half of all Drosophila Rabs exert specialized synaptic functions. The tools presented here allow systematic functional studies of these Rabs and provide a method that is applicable to any large gene family in Drosophila.

Genetic manipulation of genes and cells in the nervous system of the fruit fly

Research in the fruit fly Drosophila melanogaster has led to insights in neural development, axon guidance, ion channel function, synaptic transmission, learning and memory, diurnal rhythmicity, and neural disease that have had broad implications for neuroscience. Drosophila is currently the eukaryotic model organism that permits the most sophisticated in vivo manipulations to address the function of neurons and neuronally expressed genes. Here, we summarize many of the techniques that help assess the role of specific neurons by labeling, removing, or altering their activity. We also survey genetic manipulations to identify and characterize neural genes by mutation, overexpression, and protein labeling. Here, we attempt to acquaint the reader with available options and contexts to apply these methods.

Systematic chromosomal deletion of bacterial ribosomal protein genes

Detailed studies of ribosomal proteins (RPs), essential components of the protein biosynthetic machinery, have been hampered by the lack of readily accessible chromosomal deletions of the corresponding genes. Here, we report the systematic genomic deletion of 41 individual RP genes in Escherichia coli, which are not included in the Keio collection. Chromosomal copies of these genes were replaced by an antibiotic resistance gene in the presence of an inducible, easy-to-exchange plasmid-born allele. Using this knockout collection, we found nine RPs (L15, L21, L24, L27, L29, L30, L34, S9, and S17) nonessential for survival under induction conditions at various temperatures. Taken together with previous results, this analysis revealed that 22 of the 54 E. coli RP genes can be individually deleted from the genome. These strains also allow expression of truncated protein variants to probe the importance of RNA-protein interactions in functional sites of the ribosome. This set of strains should enhance in vivo studies of ribosome assembly/function and may ultimately allow systematic substitution of RPs with RNA.

Metabolic engineering in dark fermentative hydrogen production; theory and practice

Dark fermentation is an attractive option for hydrogen production since it could use already existing reactor technology and readily available substrates without requiring a direct input of solar energy. However, a number of improvements are required before the rates and yields of such a process approach those required for a practical process. Among the options for achieving the required advances, metabolic engineering offers some powerful tools for remodeling microbes to increase product production rates and molar yields. Here we review the current metabolic engineering tool box that is available, discuss the current status of engineering efforts as applied to dark hydrogen production, and suggest areas for future improvements.

An efficient method for recombineering GAL4 and QF drivers

Neural circuit mapping and manipulation are facilitated by independent control of gene expression in pre- and post-synaptic neurons. The GAL4/UAS and Q binary transcription systems have the potential to provide this capability. Of particular use in neural circuit mapping would be GAL4 and QF drivers specific for neurotransmitters and neurotransmitter receptors. Recently available Drosophila genomic BAC libraries make recombineering large genes including those specific for neurotransmitters and neurotransmitter receptors feasible. Here the functionality of cassettes that allow efficient recombineering of GAL4 and QF drivers based on kanamycin selection is demonstrated in Drosophila. The cassettes should, however, be generalizable for recombineering in other species.

Newly discovered antiterminator RNAs in bacteriophage

Antiterminator RNA directly modifies the transcription elongation complex so that it terminates less efficiently at intrinsic and factor-dependent terminators. These unusual RNAs were first discovered in bacteriophage HK022, where the nascent transcripts of the phage put sites promote full expression of phage genes during lytic infection. The activity of antiterminator RNA depends on specific structural elements that form as the transcript exits RNA polymerase. To further our understanding of the critical sequence features that permit RNA to serve as a transcriptional antiterminator, we have identified eight antiterminator RNA sequences in bacteriophages or prophages. There is strong sequence conservation among most of the put sequences, but sequence divergence is tolerated if critical structural elements are preserved. The most diverged antiterminator RNA is found in bacteriophage HK639. The HK639 putL transcript is an efficient antiterminator, and it has a novel structural feature that is critical for its activity. HK639 also displays a unique pattern of sensitivity to amino acid substitutions in the β' subunit zinc binding domain of RNA polymerase, adding to existing evidence that this domain interacts specifically with antiterminator RNA.

Vectors for ligation-independent construction of lacZ gene fusions and cloning of PCR products using a nicking endonuclease

Several ligation-independent cloning methods have been developed that offer advantages for construction of recombinant plasmids at high efficiency while minimizing cloning artifacts. Here we report new plasmid vectors that use the nicking endonuclease Nt.BspQI to generate extended single stranded tails for direct cloning of PCR products. The vectors include pLacCOs1, a ColE1-derivative plasmid imparting resistance to ampicillin, which allows facile construction of lacZ translational fusions and pKanCOs1, a pSC101-derivative cloning vector that imparts resistance to kanamycin, for cloning of PCR amplicons from genomic DNA as well as from ampicillin-based plasmids. We have successfully used these plasmids to directionally clone and characterize bacterial promoters that exhibit temperature regulated expression, as well as for cloning a variety of PCR products. In all cases, constructs with the correct configurations were generated at high efficiency and with a minimal number of manipulations. The cloning vectors can also be easily modified to incorporate additional reporter genes or to express epitope-tagged gene products.

Conserved, disordered C terminus of DnaK enhances cellular survival upon stress and DnaK in vitro chaperone activity

The 70-kDa heat shock proteins (Hsp70s) function as molecular chaperones through the allosteric coupling of their nucleotide- and substrate-binding domains, the structures of which are highly conserved. In contrast, the roles of the poorly structured, variable length C-terminal regions present on Hsp70s remain unclear. In many eukaryotic Hsp70s, the extreme C-terminal EEVD tetrapeptide sequence associates with co-chaperones via binding to tetratricopeptide repeat domains. It is not known whether this is the only function for this region in eukaryotic Hsp70s and what roles this region performs in Hsp70s that do not form complexes with tetratricopeptide repeat domains. We compared C-terminal sequences of 730 Hsp70 family members and identified a novel conservation pattern in a diverse subset of 165 bacterial and organellar Hsp70s. Mutation of conserved C-terminal sequence in DnaK, the predominant Hsp70 in Escherichia coli, results in significant impairment of its protein refolding activity in vitro without affecting interdomain allostery, interaction with co-chaperones DnaJ and GrpE, or the binding of a peptide substrate, defying classical explanations for the chaperoning mechanism of Hsp70. Moreover, mutation of specific conserved sites within the DnaK C terminus reduces the capacity of the cell to withstand stresses on protein folding caused by elevated temperature or the absence of other chaperones. These features of the C-terminal region support a model in which it acts as a disordered tether linked to a conserved, weak substrate-binding motif and that this enhances chaperone function by transiently interacting with folding clients.