Phthalocyanine metal complexes in catalysis

Oxidation of alkylaromatics to aromatic ketones catalyzed by metalloporphyrins under the special temperature control method

The aerobic oxidation of alkylaromatics to aromatic ketones catalyzed by metalloporphyrins under the special temperature control method was systematically investigated. Three novel and key points were found to have significant functions in this process, that is, the special temperature control method (initiation at higher temperature and reaction at lower temperature), the synergistic effect of the composite catalysts comprising cobalt and manganese porphyrins, and the amount of catalysts in the reaction. Subsequently, the effects of substitutes on alkylaromatics were also explored under the same conditions. Results showed that alkylaromatic conversions gradually increased from 8.5% to 54.3% with the para-substituents shifting from the electron-donating group to the electron-withdrawing group (i.e., methoxy < hydro < bromo < acyl < nitro). A possible mechanism for this reaction was also proposed.

Stability and catalytic properties of μ-oxo and μ-nitrido dimeric iron tetrasulfophthalocyanines in the oxidation of Orange II by tert-butylhydroperoxide

A study of catalytic activity of μ-nitrido- and μ-oxo-dimeric iron tetrasulfophthalocyanines in the oxidation of Orange II by tert-butylhydroperoxide in aqueous solutions has been performed. It is shown that though in one catalytic cycle activity of μ-oxo-dimer is higher, stability of this complex in oxidative conditions is poor. μ-nitrido-dimer combines relatively good catalytic activity with very high stability in the presence of tert-butylhydroperoxide. The mechanisms of oxidative decomposition of dimers and catalytic oxidation of Orange II have been proposed on the base of kinetic results. The products of catalytic processes are shown to be bio-degradable non-toxic small organic compounds.

Photocatalytic oxygenation of 10-methyl-9,10-dihydroacridine by O₂ with manganese porphyrins

Photocatalytic oxygenation of 10-methyl-9,10-dihydroacridine (AcrH₂) by dioxygen (O₂) with a manganese porphyrin [(P)Mn^III: 5,10,15,20-tetrakis-(2,4,6-trimethylphenyl)porphinatomanganese(III) hydroxide [(TMP)Mn^III(OH)] (1) or 5,10,15,20-tetrakis(pentafluorophenyl)porphyrinatomanganese(III) acetate [(TPFPP)Mn^III(CH₃COO)] (2)] occurred to yield 10-methyl-(9,10H)-acridone (Acr=O) in an oxygen-saturated benzonitrile (PhCN) solution under visible light irradiation. The photocatalytic reactivity of (P)Mn^III in the presence of O₂ is in proportion to concentrations of AcrH₂ or O₂ with the maximum turnover numbers of 17 and 6 for 1 and 2, respectively. The quantum yield with 1 was determined to be 0.14%. Deuterium kinetic isotope effects (KIEs) were observed with KIE = 22 for 1 and KIE = 6 for 2, indicating that hydrogen-atom transfer from AcrH₂ is involved in the rate-determining step of the photocatalytic reaction. Femtosecond transient absorption measurements are consistent with photoexcitation of (P)Mn^III, resulting in intersystem crossing from a tripquintet excited state to a tripseptet excited state. A mechanism is proposed where the tripseptet excited state reacts with O₂ to produce a putative (P)Mn^IV superoxo complex. Hydrogen-atom transfer from AcrH₂ to (P)Mn^IV(O₂^•–) generating a hydroperoxo complex (P)Mn^IV(OOH) and AcrH^• is likely the rate-determining step, in competition with back electron transfer to regenerate the ground state (P)Mn^III and O₂. The subsequent reductive O–O bond cleavage by AcrH^• may occur rapidly inside of the reaction cage to produce (P)Mn^V(O) and AcrH(OH), followed by the oxidation of AcrH(OH) by (P)Mn^V(O) to yield Acr=O with regeneration of (P)Mn^III.

Optical, electrochemical, third-order nonlinear optical, and excited state dynamics studies of thio-zinc phthalocyanine

Zinc phthalocyanine with S-aryl groups at α-positions have been synthesized and its optical, emission, electrochemical and third-order nonlinear optical properties were investigated. Both the Soret and Q-bands were red-shifted and obeyed Beer–Lambert's law. Electrochemical properties indicated that both oxidation and reduction processes were ring centered. Emission spectra were recorded in different solvents and the fluorescence yields obtained were in the range of 0.02 while time-resolved fluorescence data revealed lifetimes of typically few ns. Excited state dynamics in this novel thio-zinc phthalocyanine molecule has been investigated using femtosecond (fs) degenerate pump-probe spectroscopy. Nonlinear optical properties of this molecule have been examined using the Z-scan technique with picosecond (ps) and fs pulses. Both open and closed aperture Z-scan curves were recorded with ~2 ps/~150 fs laser pulses at a wavelength of 800 nm and nonlinear optical coefficients were extracted from both the studies. Degenerate pump-probe data performed at 600 nm suggested a single long lifetime of ~300 ps, possibly originating from the non-radiative decay of S1 state.

Ordered-mesoporous-carbon-bonded cobalt phthalocyanine: a bioinspired catalytic system for controllable hydrogen peroxide activation

The chemistry of enzymes presents a key to understanding the catalysis in the world. In the pursuit of controllable catalytic oxidation, researchers make extensive efforts to discover and develop functional materials that exhibit various properties intrinsic to enzymes. Here we describe a bioinspired catalytic system using ordered-mesoporous-carbon (OMC)-bonded cobalt tetraaminophthalocyanine (CoTAPc-OMC) as a catalyst that could mimic the space environment and reactive processes of metalloporphyrin-based heme enzymes and employing linear dodecylbenzenesulfonate as the fifth ligands to control the activation of H2O2 toward the peroxidase-like oxidation. The generation of nonselective free hydroxyl radicals was obviously inhibited. In addition, functional modification of OMC has been achieved by a moderate method, which can reduce excessive damage to the structure of OMC. Because of its favorable and tunable pore texture, CoTAPc-OMC provides a suitable interface and environment for the accessibility and oxidation of C.I. Acid Red 1, the model compound, and exhibits significantly enhanced catalytic activity and sufficient stability for H2O2 activation. The high-valent cobalt oxo intermediates with high oxidizing ability have been predicted as the acceptable active species, which have been corroborated by the results from the semiempirical quantum-chemical PM6 calculations.

Spin tuning of electron-doped metal-phthalocyanine layers

The spin state of organic-based magnets at interfaces is to a great extent determined by the organic environment and the nature of the spin-carrying metal center, which is further subject to modifications by the adsorbate-substrate coupling. Direct chemical doping offers an additional route for tailoring the electronic and magnetic characteristics of molecular magnets. Here we present a systematic investigation of the effects of alkali metal doping on the charge state and crystal field of 3d metal ions in Cu, Ni, Fe, and Mn phthalocyanine (Pc) monolayers adsorbed on Ag. Combined X-ray absorption spectroscopy and ligand field multiplet calculations show that Cu(II), Ni(II), and Fe(II) ions reduce to Cu(I), Ni(I), and Fe(I) upon alkali metal adsorption, whereas Mn maintains its formal oxidation state. The strength of the crystal field at the Ni, Fe, and Mn sites is strongly reduced upon doping. The combined effect of these changes is that the magnetic moment of high- and low-spin ions such as Cu and Ni can be entirely turned off or on, respectively, whereas the magnetic configuration of MnPc can be changed from intermediate (3/2) to high (5/2) spin. In the case of FePc a 10-fold increase of the orbital magnetic moment accompanies charge transfer and a transition to a high-spin state.

Ligand-based molecular recognition and dioxygen splitting: an endo epoxide ending

The phosphido complex RuCp*(PPh2CH=CHPPh2)(PPh2) (1) was exposed to a number of small molecules and was found to recognize and activate molecular oxygen in an unprecedented fashion: the ruthenium species split O2 in a ligand-based 4-electron reduction to produce an endo epoxide, as well as a phosphinito ligand. Based on XRD data, VT NMR studies, cyclooctene trapping studies, and crossover experiments it was determined that the reaction proceeded through an intramolecular mechanism in which initial oxidation of the phosphido ligand generated an end-on peroxo intermediate. This mechanism was also supported by computational studies and electrochemical experiments. In contrast, an analogue of 1, RuCp*(Ph2P(ortho-C6H4)PPh2)(PPh2) (3), reacted in an intermolecular fashion to generate two phosphinito ligands.

Gas cleaning and hydrogen sulfide removal for COREX coal gas by sorption enhanced catalytic oxidation over recyclable activated carbon desulfurizer

This paper proposes a novel self-developed JTS-01 desulfurizer and JZC-80 alkaline adsorbent for H2S removal and gas cleaning of the COREX coal gas in small-scale and commercial desulfurizing devices. JTS-01 desulfurizer was loaded with metal oxide (i.e., ferric oxides) catalysts on the surface of activated carbons (AC), and the catalyst capacity was improved dramatically by means of ultrasonically assisted impregnation. Consequently, the sulfur saturation capacity and sulfur capacity breakthrough increased by 30.3% and 27.9%, respectively. The whole desulfurizing process combined selective adsorption with catalytic oxidation. Moreover, JZC-80 adsorbent can effectively remove impurities such as HCl, HF, HCN, and ash in the COREX coal gas, stabilizing the system pressure drop. The JTS-01 desulfurizer and JZC-80 adsorbent have been successfully applied for the COREX coal gas cleaning in the commercial plant at Baosteel, Shanghai. The sulfur capacity of JTS-01 desulfurizer can reach more than 50% in industrial applications. Compared with the conventional dry desulfurization process, the modified AC desulfurizers have more merit, especially in terms of the JTS-01 desulfurizer with higher sulfur capacity and low pressure drop. Thus, this sorption enhanced catalytic desulfurization has promising prospects for H2S removal and other gas cleaning.

A magnetic supported iron complex for selective oxidation of sulfides to sulfoxides using 30% hydrogen peroxide at room temperature

Selective oxidation of sulfides to corresponding sulfoxides using H₂O₂ as a green oxidant at room temperature have been investigated by a magnetic supported iron (iron(ii) acetylacetonate) as an efficient and recyclable heterogeneous catalyst with excellent sulfide conversion and good sulfoxide selectivity.

Self-assembly and magnetic properties of Ni(ii)/Co(ii) coordination polymers based on 1,4-bis(imidazol-1-yl)benzene and varying biphenyltetracarboxylates

Five complexes of 1,4-bis(imidazol-1-yl)benzene, H₄bptas and cobalt/nickel are synthesized via solvothermal reaction; both of them have intriguing interpenetrated architectures.

Oxidation of primary and secondary benzylic alcohols with hydrogen peroxide and tert-butyl hydroperoxide catalyzed by a “helmet” phthalocyaninato iron complex in the absence of added organic solvent

A “helmet” metallophthalocyanine of iron(iii) is a very effective catalyst for benzylic alcohol oxidation in the absence of added organic solvent.

In situ metalation of free base phthalocyanine covalently bonded to silicon surfaces

Free 4-undecenoxyphthalocyanine molecules were covalently bonded to Si(100) and porous silicon through thermic hydrosilylation of the terminal double bonds of the undecenyl chains. The success of the anchoring strategy on both surfaces was demonstrated by the combination of X-ray photoelectron spectroscopy with control experiments performed adopting the commercially available 2,3,9,10,16,17,23,24-octakis(octyloxy)-29H,31H-phthalocyanine, which is not suited for silicon anchoring. Moreover, the study of the shape of the XPS N 1s band gave relevant information on the interactions occurring between the anchored molecules and the substrates. The spectra suggest that the phthalocyanine ring interacts significantly with the flat Si surface, whilst ring-surface interactions are less relevant on porous Si. The surface-bonded molecules were then metalated in situ with Co by using wet chemistry. The efficiency of the metalation process was evaluated by XPS measurements and, in particular, on porous silicon, the complexation of cobalt was confirmed by the disappearance in the FTIR spectra of the band at 3290 cm(-1) due to -NH stretches. Finally, XPS results revealed that the different surface-phthalocyanine interactions observed for flat and porous substrates affect the efficiency of the in situ metalation process.

Oxidation of hydrocarbons with H2O2/O2 catalyzed by osmium complexes containing p-cymene ligands in acetonitrile

Osmium π-complexes containing p-cymene ligands efficiently catalyze (TONs up to 200 000) the oxidation of alkanes to alkyl hydroperoxides with H₂O₂.

Polymeric heterogeneous catalysts of transition-metal oxides: surface characterization, physicomechanical properties, and catalytic activity

We investigate the physicomechanical properties of polymeric heterogeneous catalysts of transition-metal oxides, specifically, the specific surface area, elongation at break, breaking strength, specific electrical resistance, and volume resistivity. Digital microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and energy-dispersive analysis are used to study the surfaces of the catalysts. The experimental results show that polymeric heterogeneous catalysts of transition-metal oxides exhibit high stability and can maintain their catalytic activity under extreme reaction conditions for long-term use. The oxidation mechanism of sulfur-containing compounds in the presence of polymeric heterogeneous catalysts of transition-metal oxides is confirmed. Microstructural characterization of the catalysts is performed by using X-ray computed tomography. The activity of various catalysts in the oxidation of sulfur-containing compounds is determined. We demonstrate the potential application of polymeric heterogeneous catalysts of transition-metal oxides in industrial wastewater treatment.