Ion sieving in graphene oxide membranes via cationic control of interlayer spacing

Water Diffusion in Wiggling Graphene Membranes

Water diffusion in nanopores has attracted considerable attention in the past decades. Recently the coupling between the vibration of pore walls and movement of confined water has been recognized to largely enhance diffusion. However, its impact on water diffusion in graphene oxide membranes remains to be discussed. Here we explore how water diffusion couples with the thermal fluctuation of graphene nanochannels by molecular dynamics simulations. Our finding demonstrates an approximately linear dependence of diffusion enhancement on temperature; i.e., the wiggling nanopore enhances diffusion at low temperature and inhibits diffusion at high temperature. This mechanism is further extended to be applicable for another two typical layered materials, hBN and MoS₂. These results offer opportunities to tune surface diffusion by thermal operation or mechanical activation, advancing the application of two-dimensional materials in membrane separations.

Supramolecular Calix[n]arenes-Intercalated Graphene Oxide Membranes for Efficient Proton Conduction

Graphene oxide (GO) membranes with 2D interlaminar channels have triggered intensive interest as ion conductors. Incorporating abundant ion-conducting sites into GO interlayers is recognized as an effective strategy to facilitate ion conduction. Herein, we designed supramolecular compounds, para-sulphonato-calix[n]arenes (p-SC[n]As), as versatile intercalators to acquire highly conductive and robust GO membranes. The SC[n]A with ultrahigh ionic exchange capacity (IEC_w, 5.37 mmol g^-1) imparts sufficient proton donors, and its rigid framework imparts strong support of adjacent nanosheets. We designed three kinds of SC[n]As with the same IEC_w but different sizes as intercalators, endowing the GO/SC[n]A membranes with increasing ion concentration and d-spacing in the order of GO/SC[4]A < GO/SC[6]A < GO/SC[8]A. Therefore, the interlayers of GO/SC[8]A membranes afforded higher density of proton donors and could accommodate more water molecules to construct more continuous H-bond networks for proton transfer. Accordingly, the proton conductivities exhibited the same increasing trend, up to 327.0 mS cm^-1 of GO/SC[8]A-30% at 80 °C, 100% RH, which was 2.80 times higher than that of the GO membrane. Moreover, the GO/SC[n]A membranes remained stable in wet state, along with a 66% elevation in mechanical performance compared to the GO membrane.

Recent Advances in Graphene Oxide Membranes for Gas Separation Applications

Graphene oxide (GO) can dramatically enhance the gas separation performance of membrane technologies beyond the limits of conventional membrane materials in terms of both permeability and selectivity. Graphene oxide membranes can allow extremely high fluxes because of their ultimate thinness and unique layered structure. In addition, their high selectivity is due to the molecular sieving or diffusion effect resulting from their narrow pore size distribution or their unique surface chemistry. In the first part of this review, we briefly discuss different mechanisms of gas transport through membranes, with an emphasis on the proposed mechanisms for gas separation by GO membranes. In the second part, we review the methods for GO membrane preparation and characterization. In the third part, we provide a critical review of the literature on the application of different types of GO membranes for CO2, H2, and hydrocarbon separation. Finally, we provide recommendations for the development of high-performance GO membranes for gas separation applications.

Electrically Tunable Electron Transfer and Binding Interaction between Hydrated Ions and Graphene Oxide

Density functional theory simulations were carried out to study the binding interaction between hydrated Na⁺/Cl^- and graphene oxide (GO) under electric fields. External electric fields can modify the binding interactions of the hydrated ions with GO. The field-dependent binding energy is mainly controlled by the orbital interaction driven by the field-dependent electron transfer, in which miscellaneous electron-transfer routes in the interfaces between hydrated ions and GO surface were disclosed. The electric field is able to influence the electron-transfer degree for each route, thereby creating various electron acceptor-donor coupling interactions. Furthermore, we preliminarily explored the effect of the electric field on the interlayer structure of bilayer GO with NaCl and water confined inside. Electric fields can enlarge the interlayer spacing through tuning of the hydrated ion-GO interactions. Our simulations present a new understanding of hydrated ion-GO interactions in the presence of an electric field, which is expected to be valuable in the electrical modulation of GO nanomaterials.

Unconventional Atomic Structure of Graphene Sheets on Solid Substrates

The atomic structure of free-standing graphene comprises flat hexagonal rings with a 2.5 Å period, which is conventionally considered the only atomic period and determines the unique properties of graphene. Here, an unexpected highly ordered orthorhombic structure of graphene is directly observed with a lattice constant of ≈5 Å, spontaneously formed on various substrates. First-principles computations show that this unconventional structure can be attributed to the dipole between the graphene surface and substrates, which produces an interfacial electric field and induces atomic rearrangement on the graphene surface. Further, the formation of the orthorhombic structure can be controlled by an artificially generated interfacial electric field. Importantly, the 5 Å crystal can be manipulated and transformed in a continuous and reversible manner. Notably, the orthorhombic lattice can control the epitaxial self-assembly of amyloids. The findings reveal new insights about the atomic structure of graphene, and open up new avenues to manipulate graphene lattices.

Enhanced sieving from exfoliated MoS2 membranes via covalent functionalization

Nanolaminate membranes made of two-dimensional materials such as graphene oxide are promising candidates for molecular sieving via size-limited diffusion in the two-dimensional capillaries, but high hydrophilicity makes these membranes unstable in water. Here, we report a nanolaminate membrane based on covalently functionalized molybdenum disulfide (MoS₂) nanosheets. The functionalized MoS₂ membranes demonstrate >90% and ~87% rejection for micropollutants and NaCl, respectively, when operating under reverse osmotic conditions. The sieving performance and water flux of the functionalized MoS₂ membranes are attributed both to control of the capillary widths of the nanolaminates and to control of the surface chemistry of the nanosheets. We identify small hydrophobic functional groups, such as the methyl group, as the most promising for water purification. Methyl- functionalized nanosheets show high water permeation rates as confirmed by our molecular dynamic simulations, while maintaining high NaCl rejection. Control of the surface chemistry and the interlayer spacing therefore offers opportunities to tune the selectivity of the membranes while enhancing their stability.

Control of Edge/in-Plane Interactions toward Robust, Highly Proton Conductive Graphene Oxide Membranes

Graphene oxide (GO) membrane, bearing well-aligned interlayer nanochannels and well-defined physicochemical properties, promises fast proton transport. However, the deficiency of proton donor groups on the basal plane of GO and weak interlamellar interactions between the adjacent nanosheets often cause low proton conduction capability and poor water stability. Herein, we incorporate sulfonated graphene quantum dots (SGQD) into  GO membrane to solve the above dilemma via synergistically controlling the edge electrostatic interaction and in-plane π-π interaction of SGQD with GO nanosheets. SGQD with three different kinds of electron-withdrawing groups are employed to modulate the edge electrostatic interactions and improve the water swelling resistant property of GO membranes. Meanwhile, SGQD with abundant proton donor groups assemble on the sp² domain of GO via in-plane π-π interaction and confer the GO membranes with low-energy-barrier proton transport channels. As a result, the GO membrane achieves an enhanced proton conductivity of 324 mS cm^-1, maximum power density of 161.6 mW cm^-2, and superior water stability when immersed into water for one month. This study demonstrates a strategy for independent manipulation of conductive function and nonconductive function to fabricate high-performance proton exchange membranes.

Self-Crosslinked MXene (Ti3C2Tx) Membranes with Good Antiswelling Property for Monovalent Metal Ion Exclusion

A 2D membrane-based separation technique has been increasingly applied to solve the problem of fresh water shortage via ion rejection. However, these 2D membranes often suffer from a notorious swelling problem when immersed in solution, resulting in poor rejection for the monovalent metal ion. The design of the antiswelling 2D lamellar membranes has been proved to be a big challenge for highly efficient desalination. Here a kind of self-crosslinked MXene membrane is proposed for ion rejection with an obviously suppressed swelling property, which takes advantage of the hydroxyl terminal groups on the MXene nanosheets by forming Ti-O-Ti bonds between the neighboring nanosheets via the self-crosslinking reaction (-OH + -OH = -O- + H₂O) through a facile thermal treatment. The permeation rates of the monovalent metal ions through the self-crosslinked MXene membrane are about two orders of magnitude lower than those through the pristine MXene membrane, which indicates the obviously improved performance of the ion exclusion by self-crosslinking between the MXene lamellae. Moreover, the excellent stability of the self-crosslinked MXene membrane during the 70 h long-term ion separation also demonstrates its promising antiswelling property. Such a facile and efficient self-crosslinking strategy gives the MXene membrane a good antiswelling property for metal ion rejection, which is also suitable for many other 2D materials with tunable surface functional groups during membrane assembly.

Laminar Graphene Oxide Membranes Towards Selective Ionic and Molecular Separations: Challenges and Progress

Resolution of resources and environmental crises requires an efficient separation technologies, consequently, scientists and engineers are working vigorously for ideal separation materials. Laminar graphene oxide (GO) is a two-dimensional (2D) material offers considerable interest in this field due to its single atomic layer thickness, good stability, chemical inertness, and variety of functional groups. Recently, GO have emerged as a novel membrane material for molecular and ionic separation of gases, solvent, water, and desalination applications. This tutorial review aims to discuss the various approaches used to control the stacking of GO-based membrane with emphasis of advantages and drawbacks associated with each approach. Further, attention will also be given to describe the recent progress in GO based membranes for ionic and molecular separations. Meanwhile, challenges and opportunities will also be discussed in detail. We hope this review expected to provide a compact source of information that will be of great interest to chemists, material scientists, physicists, and engineers working or planning to work in GO based membranes for separation applications.

Effect of graphene oxide (GO) nanosheet sizes, pinhole defects and non-ideal lamellar stacking on the performance of layered GO membranes: an atomistic investigation

The effect of non-idealities, namely pinhole defects and non-ideal lamellar stacking of nanosheets, on the performance of size-differentiated graphene oxide (GO) laminates is investigated using equilibrium molecular dynamics (MD) simulations. With the increase in sizes of the constituent GO nanosheets the water permeability of the layered GO membranes decreases and salt rejection increases. But with the inclusion of non-idealities the difference in water permeability between these membranes substantially reduced. The pinholes on the GO nanosheets provide shorter routes for trans-sheet flow, thereby increasing the water permeability of the membranes. The non-ideal stacking of the nanosheets without pinhole defects results in slight reduction in water permeability because of blockage of permeation pathways inside the membranes. However, with pinhole defects non-ideal stacking becomes favorable for water permeation through the layered GO membranes; as this time the non-ideal stacking leads to formation of voids inside the membranes, which act as routes for shorter permeation pathways. The effect of these non-idealities is more significant for layered GO membranes composed of large GO nanosheets. Although the water permeability through the layered GO membrane is greatly enhanced because of these non-idealities (about 10 times), the corresponding variation in the salt rejection is very low (<2%).

Adsorption and sequestration of cadmium ions by polyptychial mesoporous biochar derived from Bacillus sp. biomass

Bacteria-derived biochars from Bucillus sp. biomass under different pyrolysis temperature (250 °C, 350 °C, 450 °C, and 550 °C, respectively) were prepared, forming polyptychial, mesoporous graphite-like structure. The adsorption and sequestration efficiencies of Cd²⁺ by these biochars were evaluated, and the underlying mechanisms were then discussed. Cd²⁺ sorption data could be well described by Langmuir mode while the pseudo-second-order kinetic model and Elovich model best fitted the kinetic data. The functional groups complexation, cation-π interactions, and interaction with minerals (including surface precipitation with phosphorus and ion exchange) jointly contributed to Cd²⁺ sorption and sequestration on biochar, but the interaction with minerals played a dominant role by forming insoluble cadmium salt composed by polycrystalline and/or amorphous phosphate-bridged ternary complex. The maximum sorption capacity of BBC350 in simulated water phase of soil for Cd²⁺ was 34.6 mg/g. Furthermore, the addition of bacteria-derived biochars (1%, w/w) decreased the fractions easily absorbed by plants for Cd in the test paddy soils by 1.9-26% in a 10-day time. Results of this study suggest that bacteria-derived biochar would be a promising functional material in environmental and agricultural application.

Self-Limiting Growth of Two-Dimensional Palladium between Graphene Oxide Layers

The ability of different materials to display self-limiting growth has recently attracted an enormous amount of attention because of the importance of nanoscale materials in applications for catalysis, energy conversion, (opto)electronics, and so forth. Here, we show that the electrochemical deposition of palladium (Pd) between graphene oxide (GO) sheets result in the self-limiting growth of 5-nm-thick Pd nanosheets. The self-limiting growth is found to be a consequence of the strong interaction of Pd with the confining GO sheets, which results in the bulk growth of Pd being energetically unfavorable for larger thicknesses. Furthermore, we have successfully carried out liquid exfoliation of the resulting Pd-GO laminates to isolate Pd nanosheets and have demonstrated their high efficiency in continuous flow catalysis and electrocatalysis.

Ultrahigh Water Flow Enhancement by Optimizing Nanopore Chemistry and Geometry

The high permeability of nanoporous membranes is crucial for separation processes and energy conversions, especially for the world today that is facing growing water scarcity and energy demands. Unfortunately, further improving permeability, without sacrificing the required selectivity for specific applications, is still extremely challenging. Here, we shed light on the mechanisms of extremely high water permeability of artificial nanopores with the aquaporin-inspired pore geometry and propose a simple yet practical optimization strategy by using computational research to relate nanopore chemistry and geometry to permeability performance. We demonstrated that an ultrahigh water flow enhancement, up to 7 orders of magnitude, can be achieved by optimizing the combination of chemical and geometrical parameters of bioinspired artificial nanopores. Moreover, we addressed an existing debate over the water flow enhancement spanning over 10^-1 to 10⁵, attributed to the huge differences in chemical and geometrical properties. Our work provides a guideline to the design and optimization of nanofluidic devices with excellent performance.

Mechanically strong MXene/Kevlar nanofiber composite membranes as high-performance nanofluidic osmotic power generators

Two-dimensional nanofluidic channels are emerging candidates for capturing osmotic energy from salinity gradients. However, present two-dimensional nanofluidic architectures are generally constructed by simple stacking of pristine nanosheets with insufficient charge densities, and exhibit low-efficiency transport dynamics, consequently resulting in undesirable power densities (<1 W m^-2). Here we demonstrate MXene/Kevlar nanofiber composite membranes as high-performance nanofluidic osmotic power generators. By mixing river water and sea water, the power density can achieve a value of approximately 4.1 W m^-2, outperforming the state-of-art membranes to the best of our knowledge. Experiments and theoretical calculations reveal that the correlation between surface charge of MXene and space charge brought by nanofibers plays a key role in modulating ion diffusion and can synergistically contribute to such a considerable energy conversion performance. This work highlights the promise in the coupling of surface charge and space charge in nanoconfinement for energy conversion driven by chemical potential gradients.

Enhanced water transport through a carbon nanotube controlled by the lateral pressure

The transport of water through carbon nanotubes (CNTs) is now of great importance in bionanotechnology and of considerable interest for potential nanofluidic applications. In this paper, we show by molecular dynamics simulations that the permeation of single-file water molecules through a CNT can be significantly improved by means of tuning the direction of pressure difference, i.e. introducing an additional lateral pressure to the longitudinal one. The water flow exhibits an interesting maximum behavior with the change of lateral pressure, deciphered by the breakdown of single-file water chain inside the CNT. The translocation time decreases monotonously with the increase of lateral pressure and exhibits a clear bifurcation due to the longitudinal pressure, corresponding to the flow enhancement. Therefore, the lateral pressure will increase the difficulty for water entering, while promotes the water conduction inside the CNT, whose competition ultimately leads to the flow maximum behaviors. Along with the water reducing inside the CNT, the CNT switches between the filling and empty states with the unique distributions of water dipole orientation, density and H-bond number. Our results indicate that tuning the direction of pressure difference should be a significant new strategy for enhancing the water permeability, where the key lies in the breakdown of single-file water chain and are thus insightful for future studies.

Chemically Robust, Cu-based Porous Coordination Polymer Nanosheets for Efficient Hydrogen Evolution: Experimental and Theoretical Studies

Due to the extremely high number of accessible active sites and short diffusion path, porous coordination polymer (PCP) nanosheets have demonstrated a variety of promising applications, especially for energy conversion and mass transfer. However, the development of chemically stable PCP nanosheets with dense active sites and large lateral size is a great challenge in terms of feasible considerations. Herein, we first designed and prepared a kind of chemically stable PCP nanosheets via a bottom-up and a top-down integral strategy. Featuring densely exposed and periodic Cu²⁺ active sites (2.1 × 10⁶ per μm²), as well as ultrathin nature (5 nm) and significant pores (18 Å), this nanosheet demonstrated remarkable performance of electrocatalytic hydrogen evolution. Furthermore, one plausible process and the effect of Cu²⁺ active sites were proposed and validated by density functional theory calculations.

How ions block the single-file water transport through a carbon nanotube

Understanding the blockage of ions for water transport through nanochannels is crucial for the design of desalination nanofluidic devices. In this work, we systematically clarify how ions block the single-file water transport through a (6,6) carbon nanotube (CNT) by using molecular dynamics simulations. We consider various pressure differences and salt concentrations. With the increase of pressure difference, the water flux shows a linear growth that coincides with the Hagen-Poiseuille equation. Interestingly, the dependence of the CNT-ion interaction on the salt concentration results in a distinct ion blockage effect that ultimately leads to water flux bifurcation. The water translocation time shows a power law decay with pressure, depending on the salt concentration. Furthermore, with the increase of salt concentration, the water flux shows a linear decay with a larger slope for higher pressure, while the water translocation time shows an opposite behavior. Therefore, the ions can not only block the water entering but also slow down the water motion inside the CNT. Notably, the probability of cations and anions appearing at the CNT entrance is quite similar, suggesting a similar blockage effect; however, anions show deeper interactions with the CNT because of their larger size. We finally find a unique linear relation between the water flux and occupancy divided by the translocation time. Our results provide insightful information on the ion blockage effect for the single-file water transport, and are thus helpful for the design of novel filtration membranes.

Graphite phase carbon nitride based membrane for selective permeation

Precise control of interlayer spacing and functionality is crucial in two-dimensional material based membrane separation technology. Here we show anion intercalation in protonated graphite phase carbon nitride (GCN) that tunes the interlayer spacing and functions of GCN-based membranes for selective permeation in aqueous/organic solutions. Sulfate anion intercalation leads to a crystalline and amphipathic membrane with an accessible interlayer spacing at ~10.8 Å, which allows high solvent permeability and sieves out the solutes with sizes larger than the spacing. We further extend the concept and illustrate the example of GCN-based chiral membrane via incorporating (1R)-(-)-10-camphorsulfonic anion into protonated GCN layers. The membrane exhibits a molecular weight cutoff around 150 among various enantiomers and highly enantioselective permeation towards limonene racemate with an enantiomeric excess value of 89%. This work paves a feasible way to achieve water purification and chiral separation technologies using decorated laminated membranes.

In 2D materials membrane separation technology, control of interlayer spacing and functionality determines the separation performance. Here the authors realize graphitic carbon nitride membranes with anion intercalation into the protonated sheets, achieving (enantio-) selective separation in aqueous and organic solution.

Ice Nucleation of Confined Monolayer Water Conforms to Classical Nucleation Theory

We confirmed that monolayer water confined by parallel graphene sheets spontaneously crystallizes from a structurally and dynamically heterogeneous liquid phase under moderate supercooling via direct molecular dynamics simulation. Square-lattice-like geometric order is observed at the early stage of nucleation and is preserved during the entire nucleus growth process. The diffusion coefficient and free energy profile in the cluster space extracted from a Bayesian trajectory analysis agree well with the classical nucleation theory (CNT) prediction and yield thermodynamic quantities exhibiting linear temperature dependence. The effectiveness of maximum cluster size as the descriptor of ice nucleation dynamics in the CNT framework can be attributed to the dynamical time scale decoupling and strong structural pattern dependence of density fluctuation in the liquid phase.

Chemically modified graphene films with tunable negative Poisson's ratios

Graphene-derived macroscopic assemblies feature hierarchical nano- and microstructures that provide numerous routes for surface and interfacial functionalization achieving unconventional material properties. We report that the microstructural hierarchy of pristine chemically modified graphene films, featuring wrinkles, delamination of close-packed laminates, their ordered and disordered stacks, renders remarkable negative Poisson’s ratios ranging from −0.25 to −0.55. The mechanism proposed is validated by the experimental characterization and theoretical analysis. Based on the understanding of microstructural origins, pre-strech is applied to endow chemically modified graphene films with controlled negative Poisson’s ratios. Modulating the wavy textures of the inter-connected network of close-packed laminates in the chemically modified graphene films also yields finely-tuned negative Poisson’s ratios. These findings offer the key insights into rational design of films constructed from two-dimensional materials with negative Poisson’s ratios and mechanomutable performance.

Negative Poisson’s ratio, offering unusual properties, is displayed by several materials and predicted for graphene. This work demonstrates such behaviors in monolithic films with interconnected networks of close-packed graphene laminates, and tunability through the chemistry and microstructures.

Monte Carlo Simulations of Framework Defects in Layered Two-Dimensional Nanomaterial Desalination Membranes: Implications for Permeability and Selectivity

Two-dimensional nanomaterial (2-D NM) frameworks, especially those comprising graphene oxide, have received extensive research interest for membrane-based separation processes and desalination. However, the impact of horizontal defects in 2-D NM frameworks, which stem from nonuniform deposition of 2-D NM flakes during layer build-up, has been almost entirely overlooked. In this work, we apply Monte Carlo simulations, under idealized conditions wherein the vertical interlayer spacing allows for water permeation while perfectly excluding salt, on both the formation of the laminate structure and molecular transport through the laminate. Our simulations show that 2-D NM frameworks are extremely tortuous (tortuosity ≈10³), with water permeability decreasing from 20 to <1 L m^-2 h^-1 bar^-1 as thickness increased from 8 to 167 nm. Additionally, we find that framework defects allow salt to percolate through the framework, hindering water-salt selectivity. 2-D NM frameworks with a packing density of 75%, representative of most 2-D NM membranes, are projected to achieve <92% NaCl rejection at a water permeability of <1 L m^-2 h^-1 bar^-1, even with ideal interlayer spacing. A high packing density of 90%, which to our knowledge has yet to be achieved, could yield comparable performance to current desalination membranes. Maximizing packing density is therefore a critical technical challenge, in addition to the already daunting challenge of optimizing interlayer spacing, for the development of 2-D NM membranes.

Hydration of Hofmeister ions

Water dissolves salt into ions and then hydrates the ions to form an aqueous solution. Hydration of ions deforms the hydrogen bonding network and triggers the solution with what the pure water never shows such as conductivity, molecular diffusivity, thermal stability, surface stress, solubility, and viscosity, having enormous impact to many branches in biochemistry, chemistry, physics, and energy and environmental industry sectors. However, regulations for the solute-solute-solvent interactions are still open for exploration. From the perspective of the screened ionic polarization and O:H-O bond relaxation, this treatise features the recent progress and a perspective in understanding the hydration dynamics of Hofmeister ions in the typical YI, NaX, ZX₂, and NaT salt solutions (Y = Li, Na, K, Rb, Cs; X = F, Cl, Br, I; Z = Mg, Ca, Ba, Sr; T = ClO₄, NO₃, HSO₄, SCN). Phonon spectrometric analysis turned out the f(C) number fraction of bonds transition from the mode of deionized water to the hydrating. The linear f(C) ∝ C form features the invariant hydration volume of small cations that are fully-screened by their hydration H₂O dipoles. The nonlinear f(C) ∝ 1 - exp.(-C/C₀) form describes that the number insufficiency of the ordered hydrating H₂O dipoles partially screens the anions. Molecular anions show stronger yet shorter electric field of dipoles. The screened ionic polarization, inter-solute interaction, and O:H-O bond transition unify the solution conductivity, surface stress, viscosity, and critical energies for phase transition.

Ultrathin Polyamide Nanofiltration Membrane Fabricated on Brush-Painted Single-Walled Carbon Nanotube Network Support for Ion Sieving

Recently, ultrathin polyamide nanofiltration membranes fabricated on nanomaterial-based supports have overcome the limitations of conventional supports and show greatly improved separation performance. However, the feasibility of the nanomaterial-based supports for large-scale fabrication of the ultrathin polyamide membrane is still unclear. Herein, we report a controllable and saleable fabrication technique for a single-walled carbon nanotube (SWCNT) network support via brush painting. The mechanical and chemical stability of the SWCNT network support were carefully examined, and an ultrathin polyamide membrane with thickness of ∼15 nm was successfully fabricated based on such a support. The obtained thin-film composite (TFC) polyamide nanofiltration membranes exhibited extremely high water permeability of ∼40 L m^-2 h ^-1 bar^-1, a high Na₂SO ₄ rejection of 96.5%, and high monovalent/divalent ion permeation selectivity and maintained highly efficient ion sieving throughout 48 h of testing. This work demonstrates a practical route toward the controllable large-scale fabrication of the TFC membrane with an SWCNT network support for ion and molecule sieving. This work is also expected to boost the mass production and practical applications of state-of-the-art membranes composed of one-dimensional and two-dimensional nanomaterials as well as the nanomaterial-supported TFC membranes.

Graphene Oxide-Enabled Synthesis of Metal Oxide Origamis for Soft Robotics

Origami structures have been widely applied in various technologies especially in the fields of soft robotics. Metal oxides (MOs) have recently emerged as unconventional backbone materials for constructing complex origamis with distinct functionalities. However, the MO origami structures reported in the literature were rigid and not deformable, thus limiting their applications to soft robotics. Herein, we reported a graphene oxide (GO)-enabled templating synthesis to produce complex MO origami structures from their paper origami templates with high structural replication. The MO origami structures were next stabilized with elastomer, and the MO-elastomer origamis were able to be adapted into multiple actuation systems (including magnetic fields, shape-memory alloys, and pneumatics) for the fabrication of MO origami robots. Compared with conventional paper origami robots, the MO robots were lightweight, mechanically compliant, fire-retardant, magnetic responsive, and power efficient. We further demonstrated the legendary phoenix-fire-reborn concept in the soft robotics fields: a paper origami robot sacrificed itself in a fire scene and transformed itself into a downsized Al₂O₃ robot; the Al₂O₃ robot was able to crawl through a narrow tunnel where the original paper robot was unfit. These MO reconfigurable origamis provide an expanded material library for building soft robotics, and the functionalities of MO robots can be systematically engineered via the intercalation of various metal ions during the GO-enabled synthesis.

Fast Capture of Fluoride by Anion-Exchange Zirconium-Graphene Hybrid Adsorbent

Fluoride contamination is a severe problem affecting the safety of drinking water around the world. High-rate adsorbent materials are particularly desirable for potable water defluoridation. Current research on fluoride adsorbent materials is primarily focused on metal-based adsorbents with high capacities. However, they generally suffer from slow adsorption kinetics due to the adsorption mechanism of a sluggish exchange between coordinated hydroxyl groups and fluoride ions. Designing metal-based adsorbents to mimic the rapid ion-exchange behavior of anion-exchange resins is a promising approach to integrate fast adsorption and high capacity for fluoride removal. Herein, a ZrO(OH)_1.33Cl_0.66-reduced graphene oxide (rGO) hybrid adsorbent containing exchangeable chloride ions was synthesized with the assistance of cation-π interactions. Unlike most adsorbents requiring a high surface area, this composite has a negligible surface area (1.45 m² g^-1), but can deliver a fast fluoride capture performance (reaching equilibrium in 5 min) with high adsorption rate constants of 1.05 min^-1 and 0.171 mg g^-1 min^-1, around 10 times faster than the best result reported in the literature. Besides, ZrO(OH)_1.33Cl_0.66-rGO can also demonstrate a high fluoride uptake (44.14 mg g^-1) and high removal efficiency (94.4%) in 35 mg L^-1 fluoride solution, both among the highest performances for fluoride adsorption.

Designing Melittin-Graphene Hybrid Complexes for Enhanced Antibacterial Activity

Antimicrobial peptides (AMPs) promise a fundamental solution to the devastating threat of drug-resistant bacteria. However, drawbacks of AMPs (e.g., poor cell membrane penetration efficiency) seriously block their clinical use. In this work, rational design of a hybrid complex of melittin (as a representative AMP) and graphene or graphene oxide (Gra or GO) nanosheets for enhanced antibacterial ability is achieved, via combining in-silico prediction and in-tube test. In comparison to pristine melittin, the specifically designed AMP-Gra (/GO) complex exhibits remarkable efficiency in transmembrane perforation with an over tenfold decrease in the threshold working concentration of peptide; moreover, it has an up to 20-fold enhancement in antibacterial activity against both Gram-negative and Gram-positive bacteria. Such improvement is ascribed to the synergetic insertion of nanosheets and melittin due to similarity in antibacterial mechanism between them and is further regulated by the structural factors of the complex, including the intersheet spacing and surface functionalization of the Gra/GO sheets, etc. These results provide practical guidelines to engineer AMPs with nanotechnology for improved antimicrobial performances, especially based on targeted functionalization of the Gra/GO nanosheets.

Dehydration impeding ionic conductance through two-dimensional angstrom-scale slits

There has been long-standing academic interest in the study of ion transport in nanochannel systems, owing to its vast implications in understanding the nature of numerous environmental, biological and chemical processes. Here, we investigate ion transport through two-dimensional slits using molecular dynamics simulations. These slits with angstrom-scale height dimensions can be realistically replicated in the simulation, which leads to direct comparisons between simulations and experiments. In particular, this new confining geometry allows the size exclusion effect to be unambiguously decoupled from other mechanisms. As the slit size approaches the ultimate scale, dehydration at the entry impedes the ionic conductance significantly, and even induces a complete ion rejection. We demonstrate that energy barriers required to accomplish the ion permeation can be theoretically connected to the partial dehydration process. The proposed model is further validated by simulations. Our results offer insights into the atomistic details of ion permeation, which may also shed light on developing effective ways for water filtration and desalination.

Selectively Enhanced Ion Transport in Graphene Oxide Membrane/PET Conical Nanopore System

Graphene oxide (GO) has become a promising 2D material in many areas, such as gas separation, seawater desalination, antibacterial materials, and so on because of its abundant oxygen-containing functional groups and excellent dispersibility in various solvents. The graphene oxide membrane (GOM), a laminar and channel-rich structure assembled by stacked GO nanosheets, served as a kind of precise and ultrafast separation material has attracted widespread attention in membrane separation field. To break the trade-off between ion permeability and ion selectivity of separation membrane based on GOM, GOM/conical nanopore system is obtained by spin-coating ultrathin GOM on PET conical nanopore, which possesses ion rectification property. Comparing to pure PET conical nanopore, the existence of GOM not only enhances the cation conductance but also makes the ion rectification ratio increase from 4.6 to 238.0 in KCl solution. Assisted by COMSOL simulation, it is proved that the GOM can absorb large amount of cations and act as cation source to improve the ion selectivity and rectification effect of GOM/conical nanopore system. Finally, the chemical stability of GOM/conical nanopore is also investigated and the corresponding results reveal that the GOM/conical nanopore system can perform the ion rectification behavior in a wider pH range than pure PET conical nanopore. The presented findings demonstrate the great potential applications of GOM/conical nanopore system in ionic logic circuits and sensor systems.

Two dimensional nanomaterial-based separation membranes

Two dimensional nanomaterials including graphene, hexagonal boron-nitride, molybdenum disulfide, etc., provide immense potentials for separation applications. However, the tradeoff between selectivity and permeability in choosing 2D nanomaterial-based membrane is inevitable, limiting the progress on separation efficiency for mass industrial applications. To target these issues, versatile strategies such as the rational design of predefined interlayer channels, membrane nanopores, and reasonable functionalization, as well as new mechanisms have been emerged. In this review, we introduce the recent progress on separation mechanisms of 2D nanomaterial-based membranes with different structures (including the interlayer channels type and the membrane nanopores type) and their inner surface functionalization. Moreover, the interface designs are discussed, in terms of employing dynamic liquid-liquid/liquid-gas interfaces, to advance the selectivity and permeability of the membranes. We further discuss the variety of separation applications based on 2D nanomaterial-based membranes. The authors hope this review will inspire the active interest of many scientists in the area of the development and application of membrane science.