Shewanella secretes flavins that mediate extracellular electron transfer

Enhancement of extracellular electron transfer and bioelectricity output by synthetic porin

The microbial fuel cell (MFC), is a promising environmental biotechnology for harvesting electricity energy from organic wastes. However, low bacterial membrane permeability of electron shuttles is a limiting factor that restricts the electron shuttle-mediated extracellular electron transfer (EET) from bacteria to electrodes, thus the electricity power output of MFCs. To this end, we heterologously expressed a porin protein OprF from Pseudomonas aeruginosa PAO1 into Escherichia coli, which dramatically increased its membrane permeability, delivering a much higher current output in MFCs than its parental strain (BL21). We found that the oprF-expression strain showed more efficient EET than its parental strain. More strikingly, the enhanced membrane permeability also rendered the oprF-expression strain an efficient usage of riboflavin as the electron shuttle, whereas its parental strain was incapable of. Our results substantiated that membrane permeability is crucial for the efficient EET, and indicated that the expression of synthetic porins could be an efficient strategy to enhance bioelectricity generation by microorganisms (including electrogenic bacteria) in MFCs.

Fe(III) reduction and U(VI) immobilization by Paenibacillus sp. strain 300A, isolated from Hanford 300A subsurface sediments

A facultative iron-reducing [Fe(III)-reducing] Paenibacillus sp. strain was isolated from Hanford 300A subsurface sediment biofilms that was capable of reducing soluble Fe(III) complexes [Fe(III)-nitrilotriacetic acid and Fe(III)-citrate] but unable to reduce poorly crystalline ferrihydrite (Fh). However, Paenibacillus sp. 300A was capable of reducing Fh in the presence of low concentrations (2 μM) of either of the electron transfer mediators (ETMs) flavin mononucleotide (FMN) or anthraquinone-2,6-disulfonate (AQDS). Maximum initial Fh reduction rates were observed at catalytic concentrations (<10 μM) of either FMN or AQDS. Higher FMN concentrations inhibited Fh reduction, while increased AQDS concentrations did not. We also found that Paenibacillus sp. 300A could reduce Fh in the presence of natural ETMs from Hanford 300A subsurface sediments. In the absence of ETMs, Paenibacillus sp. 300A was capable of immobilizing U(VI) through both reduction and adsorption. The relative contributions of adsorption and microbial reduction to U(VI) removal from the aqueous phase were ∼7:3 in PIPES [piperazine-N,N'-bis(2-ethanesulfonic acid)] and ∼1:4 in bicarbonate buffer. Our study demonstrated that Paenibacillus sp. 300A catalyzes Fe(III) reduction and U(VI) immobilization and that these reactions benefit from externally added or naturally existing ETMs in 300A subsurface sediments.

Change in electrogenic activity of the microbial fuel cell (MFC) with the function of biocathode microenvironment as terminal electron accepting condition: influence on overpotentials and bio-electro kinetics

Influence of biocathode microenvironment as terminal electron accepting process (TEAP) on the electrogenic activity of the microbial fuel cell (MFC)/bio-electrochemical system (BES) was evaluated in concurrence with the internal losses and bio-electro kinetics. Aerobic metabolism as TEAP showed power output (37.5 ± 2.7 mW/m(2)) for extended time (240 h) over abiotic (42.5 ± 1.5 mW/m(2)) electron accepting process. On the contrary, anaerobic metabolism as TEAP showed negligible power output in spite of increased retention time due to the absence of electron acceptor. Presence of strong electron acceptor conditions in aerobic metabolism facilitated gradual and stable reduction of electrons which helped to overcome the activation over potential and other potential losses. Voltammetric and amperometric analysis witnessed higher and sustainable electron discharge against the aerobic metabolism at cathode. Bio-electro kinetic analysis also showed lower Tafel slope and electron transfer co-efficient indicating the positive impact of aerobic metabolism at cathode in decreasing the internal losses.

Photoautotrophic cathodic oxygen reduction catalyzed by a green alga, Chlamydomonas reinhardtii

Biofuel cells (BFCs) use enzymes and microbial cells to produce energy from bioavailable substrates and treat various wastewaters, and cathodic oxygen reduction is a key factor governing the efficiency of BFCs. In this study, we demonstrated that a green alga, Chlamydomonas reinhardtii, could directly mediate oxygen reduction. Cyclic voltammogram analysis revealed that the C. reinhardtii biofilm formed on a solid electrode was responsible for oxygen reduction without dosing of electron mediator. Furthermore, 4-electron oxygen reduction pathway was found in this self-sustained, light-responded BFC. The results of this study could expand our understanding and viewpoints of biocathode catalysis, which is essential for novel catalyst design and development for BFCs.

Geothrix fermentans secretes two different redox-active compounds to utilize electron acceptors across a wide range of redox potentials

The current understanding of dissimilatory metal reduction is based primarily on isolates from the proteobacterial genera Geobacter and Shewanella. However, environments undergoing active Fe(III) reduction often harbor less-well-studied phyla that are equally abundant. In this work, electrochemical techniques were used to analyze respiratory electron transfer by the only known Fe(III)-reducing representative of the Acidobacteria, Geothrix fermentans. In contrast to previously characterized metal-reducing bacteria, which typically reach maximal rates of respiration at electron acceptor potentials of 0 V versus standard hydrogen electrode (SHE), G. fermentans required potentials as high as 0.55 V to respire at its maximum rate. In addition, G. fermentans secreted two different soluble redox-active electron shuttles with separate redox potentials (-0.2 V and 0.3 V). The compound with the lower midpoint potential, responsible for 20 to 30% of electron transfer activity, was riboflavin. The behavior of the higher-potential compound was consistent with hydrophilic UV-fluorescent molecules previously found in G. fermentans supernatants. Both electron shuttles were also produced when cultures were grown with Fe(III), but not when fumarate was the electron acceptor. This study reveals that Geothrix is able to take advantage of higher-redox-potential environments, demonstrates that secretion of flavin-based shuttles is not confined to Shewanella, and points to the existence of high-potential-redox-active compounds involved in extracellular electron transfer. Based on differences between the respiratory strategies of Geothrix and Geobacter, these two groups of bacteria could exist in distinctive environmental niches defined by redox potential.

Biomineralization mechanism of gold by zygomycete fungi Rhizopus oryzae

In recent years, there has been significant progress in the biological synthesis of nanomaterials. However, the molecular mechanism of gold biomineralization in microorganisms of industrial relevance remains largely unexplored. Here we describe the biosynthesis mechanism of gold nanoparticles (AuNPs) in the fungus Rhizopus oryzae . Reduction of AuCl(4)(-) [Au(III)] to nanoparticulate Au(0) (AuNPs) occurs in both the cell wall and cytoplasmic region of R. oryzae . The average size of the as-synthesized AuNPs is ~15 nm. The biomineralization occurs through adsorption, initial reduction to Au(I), followed by complexation [Au(I) complexes], and final reduction to Au(0). Subtoxic concentrations (up to 130 μM) of AuCl(4)(-) in the growth medium increase growth of R. oryzae and induce two stress response proteins while simultaneously down-regulating two other proteins. The induction increases mycelial growth, protein yield, and AuNP biosynthesis. At higher Au(III) concentrations (>130 μM), both mycelial and protein yield decrease and damages to the cellular ultrastructure are observed, likely due to the toxic effect of Au(III). Protein profile analysis also confirms the gold toxicity on R. oryzae at high concentrations. Sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis shows that two proteins of 45 and 42 kDa participate in gold reduction, while an 80 kDa protein serves as a capping agent in AuNP biosynthesis.

Multistep hopping and extracellular charge transfer in microbial redox chains

Dissimilatory metal-reducing bacteria are microorganisms that gain energy by transferring respiratory electrons to extracellular solid-phase electron acceptors. In addition to its importance for physiology and natural environmental processes, this form of metabolism is being investigated for energy conversion and fuel production in bioelectrochemical systems, where microbes are used as biocatalysts at electrodes. One proposed strategy to accomplish this extracellular charge transfer involves forming a conductive pathway to electrodes by incorporating redox components on outer cell membranes and along extracellular appendages known as microbial nanowires within biofilms. To describe extracellular charge transfer in microbial redox chains, we employed a model based on incoherent hopping between sites in the chain and an interfacial treatment of electrochemical interactions with the surrounding electrodes. Based on this model, we calculated the current-voltage (I-V) characteristics and found the results to be in good agreement with I-V measurements across and along individual microbial nanowires produced by the bacterium Shewanella oneidensis MR-1. Based on our analysis, we propose that multistep hopping in redox chains constitutes a viable strategy for extracellular charge transfer in microbial biofilms.

The 'porin-cytochrome' model for microbe-to-mineral electron transfer

Many species of bacteria can couple anaerobic growth to the respiratory reduction of insoluble minerals containing Fe(III) or Mn(III/IV). It has been suggested that in Shewanella species electrons cross the outer membrane to extracellular substrates via 'porin-cytochrome' electron transport modules. The molecular structure of an outer-membrane extracellular-facing deca-haem terminus for such a module has recently been resolved. It is debated how, once outside the cells, electrons are transferred from outer-membrane cytochromes to insoluble electron sinks. This may occur directly or by assemblies of cytochromes, perhaps functioning as 'nanowires', or via electron shuttles. Here we review recent work in this field and explore whether it allows for unification of the electron transport mechanisms supporting extracellular mineral respiration in Shewanella that may extend into other genera of Gram-negative bacteria.

Characterisation of the dissimilatory reduction of Fe(III)-oxyhydroxide at the microbe-mineral interface: the application of STXM-XMCD

A combination of scanning transmission X-ray microscopy and X-ray magnetic circular dichroism was used to spatially resolve the distribution of different carbon and iron species associated with Shewanella oneidensis MR-1 cells. S. oneidensis MR-1 couples the reduction of Fe(III)-oxyhydroxides to the oxidation of organic matter in order to conserve energy for growth. Several potential mechanisms may be used by S. oneidensis MR-1 to facilitate Fe(III)-reduction. These include direct contact between the cell and mineral surface, secretion of either exogenous electron shuttles or Fe-chelating agents and the production of conductive 'nanowires'. In this study, the protein/lipid signature of the bacterial cells was associated with areas of magnetite (Fe₃O₄), the product of dissimilatory Fe(III) reduction, which was oversaturated with Fe(II) (compared to stoichiometric magnetite). However, areas of the sample rich in polysaccharides, most likely associated with extracellular polymeric matrix and not in direct contact with the cell surface, were undersaturated with Fe(II), forming maghemite-like (γ-Fe₂O₃) phases compared to stoichiometric magnetite. The reduced form of magnetite will be much more effective in environmental remediation such as the immobilisation of toxic metals. These findings suggest a dominant role for surface contact-mediated electron transfer in this study and also the inhomogeneity of magnetite species on the submicron scale present in microbial reactions. This study also illustrates the applicability of this new synchrotron-based technique for high-resolution characterisation of the microbe-mineral interface, which is pivotal in controlling the chemistry of the Earth's critical zone.

Role of outer membrane c-type cytochromes MtrC and OmcA in Shewanella oneidensis MR-1 cell production, accumulation, and detachment during respiration on hematite

The iron-reducing bacterium Shewanella oneidensis MR-1 has the capacity to contribute to iron cycling over the long term by respiring on crystalline iron oxides such as hematite when poorly crystalline phases are depleted. The ability of outer membrane cytochromes OmcA and MtrC of MR-1 to bind to and transfer electrons to hematite has led to the suggestion that they function as terminal reductases when this mineral is used as a respiratory substrate. Differences in their redox behavior and hematite-binding properties, however, indicate that they play different roles in the electron transfer reaction. Here, we investigated how these differences in cytochrome behavior with respect to hematite affected biofilm development when the mineral served as terminal electron acceptor (TEA). Upon attachment to hematite, cells of the wild-type (WT) strain as well as those of a ΔomcA mutant but not those of a ΔmtrC mutant replicated and accumulated on the mineral surface. The results indicate that MtrC but not OmcA is required for growth when this mineral serves as TEA. While an OmcA deficiency did not impede cell replication and accumulation on hematite prior to achievement of a maximum surface cell density comparable to that established by WT cells, OmcA was required for efficient electron transfer and cell attachment to hematite once maximum surface cell density was achieved. OmcA may therefore play a role in overcoming barriers to electron transfer and cell attachment to hematite imposed by reductive dissolution of the mineral surface from cell respiration associated with achievement of high surface cell densities.

Electromicrobiology

Electromicrobiology deals with the interactions between microorganisms and electronic devices and with the novel electrical properties of microorganisms. A diversity of microorganisms can donate electrons to, or accept electrons from, electrodes without the addition of artificial electron shuttles. However, the mechanisms for microbe-electrode electron exchange have been seriously studied in only a few microorganisms. Shewanella oneidensis interacts with electrodes primarily via flavins that function as soluble electron shuttles. Geobacter sulfurreducens makes direct electrical contacts with electrodes via outer-surface, c-type cytochromes. G. sulfurreducens is also capable of long-range electron transport along pili, known as microbial nanowires, that have metallic-like conductivity similar to that previously described in synthetic conducting polymers. Pili networks confer conductivity to G. sulfurreducens biofilms, which function as a conducting polymer, with supercapacitor and transistor functionalities. Conductive microorganisms and/or their nanowires have a number of potential practical applications, but additional basic research will be necessary for rational optimization.

Essential data and techniques for conducting microbial fuel cell and other types of bioelectrochemical system experiments

Microbial fuel cells (MFCs) and other bioelectrochemical systems are new technologies that require expertise in a variety of technical areas, ranging from electrochemistry to biological wastewater treatment. There are certain data and critical information that should be included in every MFC study, such as specific surface area of the electrodes, solution conductivity, and power densities normalized to electrode surface area and volumes. Electrochemical techniques such as linear sweep voltammetry can be used to understand the performance of the MFC, but extremely slow scans are required for these biological systems compared to more traditional fuel cells. In this Minireview, the critical information needed for MFC studies is provided with examples of how results can be better conveyed through a full description of materials, the use of proper controls, and inclusion of a more complete electrochemical analysis.

Enzymatic versus microbial bio-catalyzed electrodes in bio-electrochemical systems

Catalyses of electrode reactions by oxidoreductases or living electroactive bacteria are compared and recent advances reviewed. The relation between the biological and nevertheless inert nature of enzymes and the living machinery of electroactive microbes is discussed. The way these biocatalysts may be electrically contacted to anodes or cathodes is considered with a focus on their immobilization at electrodes and on the issue of time stability of these assemblies. Recent improvements in power output of biofuel cells are reviewed together with applications that have appeared in the literature. This account also reviews new approaches for combining enzymes and living microbes in bioelectrochemical systems such as reproducing microbial metabolisms with enzyme cascades and expressing oxidoreductases on genetically engineered microbes. Finally, the use of surface chemistry for studying the microbe-electrode interface and bioelectrodes with cell organelles, such as mitochondria, or with higher organisms, such as yeasts, are discussed. Some perspectives for future research to extend this field are offered as conclusions.

Microbial nanowires: a new paradigm for biological electron transfer and bioelectronics

The discovery that Geobacter sulfurreducens can produce protein filaments with metallic-like conductivity, known as microbial nanowires, that facilitate long-range electron transport is a paradigm shift in biological electron transfer and has important implications for biogeochemistry, microbial ecology, and the emerging field of bioelectronics. Although filaments in a wide diversity of microorganisms have been called microbial nanowires, the type IV pili of G. sulfurreducens and G. metallireducens are the only filaments that have been shown to be required for extracellular electron transport to extracellular electron acceptors or for conduction of electrons through biofilms. Studies of G. sulfurreducens pili preparations and intact biofilms under physiologically relevant conditions have provided multiple lines of evidence for metallic-like conduction along the length of pili and for the possibility of pili networks to confer high conductivity within biofilms. This mechanism of electron conduction contrasts with the previously known mechanism for biological electron transfer via electron tunneling or hopping between closely associated molecules, a strategy unlikely to be well adapted for long-range electron transport outside the cell. In addition to promoting electron exchange with abiotic electron acceptors, microbial nanowires have recently been shown to be involved in direct interspecies electron transfer between syntrophic partners. An improved understanding of the mechanisms for metallic-like conductivity in microbial nanowires, as well as engineering microorganisms with desirable catalytic abilities with nanowires, could lead to new applications in microbial electrosynthesis and bioelectronics.

The diversity of techniques to study electrochemically active biofilms highlights the need for standardization

Microbial bioelectrochemical systems (BESs) employ whole microorganisms to catalyze electrode reactions. BESs allow electricity generation from wastewater, electricity-driven (bio)production, biosensing, and bioremediation. Many of these processes are perceived as highly promising; however, to date the performance of particularly bioproduction processes is not yet at the level required for practical applications. Critical to enabling high catalytic activity are the electrochemically active microorganisms. Whether the biocatalyst comes as a planktonic cell, a surface monolayer of cells, or a fully developed biofilm, effective electron transfer and process performance need to be achieved. However, despite many different approaches and extensive research, many questions regarding the functioning of electroactive microorganisms remain open. This is certainly due to the complexity of bioelectrochemical processes, as they depend on microbial, electrochemical, physical-chemical, and operational considerations. This versatility and complexity calls for a plethora of analytical tools required to study electrochemically active microorganisms, especially biofilms. Here, we present an overview of the parameters defining electroactive microbial biofilms (EABfs) and the analytical toolbox available to study them at different levels of resolution. As we will show, a broad diversity of techniques have been applied to this field; however, these have often led to conflicting information. Consequently, to alleviate this and further mature the field of BES research, a standardized framework appears essential.

A laminar-flow microfluidic device for quantitative analysis of microbial electrochemical activity

We report a laminar flow-based microfluidic bioelectrochemical system (BES) that was fabricated by using polydimethyl siloxane (PDMS) channels and gold electrodes. The microfluidic BES was operated as a potentiostatically controlled two-electrode system. A pure culture of Geobacter sulfurreducens strain PCA, which is a model electrode-respiring bacterium, was grown in the channel and respired with the electrode under strict anaerobic conditions. We took advantage of the short hydraulic retention time (≈ 2 min) and response times (<21 min) to rapidly test the effect of certain chemical stimuli, such as O(2) and anthraquinone disulfide (AQDS), on electric current production by G. sulfurreducens. The results showed that: i) short-term (2 min) exposure to O(2) -saturated solution did not cause any irreversible toxicity to G. sulfurreducens, and ii) AQDS can be used as a redox mediator by G. sulfurreducens for shuttling electrons between the microbe and the electrode. We, therefore, demonstrate that the microfluidic BES is a promising research tool for gaining insight into microbial electrochemical activity. In our two-dimensional microfluidic-based research tool, a well-defined electrochemical environment can be maintained with the help of laminar flow without a membrane to separate two electrodes.

Flavins secreted by bacterial cells of Shewanella catalyze cathodic oxygen reduction

On Her Majesty's Secrete Service: Oxygen reduction is an important process for microbial fuel cells (MFCs) and microbiologically-influenced corrosion (MIC). We demonstrate that flavins secreted by anode-respiring Shewanella cells can catalyze cathodic oxygen reduction via adsorption on the cathode. The findings will provide new insight for developing methods to improve MFC performance and to prevent MIC.

pH, redox potential and local biofilm potential microenvironments within Geobacter sulfurreducens biofilms and their roles in electron transfer

The limitation of pH inside electrode-respiring biofilms is a well-known concept. However, little is known about how pH and redox potential are affected by increasing current inside biofilms respiring on electrodes. Quantifying the variations in pH and redox potential with increasing current is needed to determine how electron transfer is tied to proton transfer within the biofilm. In this research, we quantified pH and redox potential variations in electrode-respiring Geobacter sulfurreducens biofilms as a function of respiration rates, measured as current. We also characterized pH and redox potential at the counter electrode. We concluded that (1) pH continued to decrease in the biofilm through different growth phases, showing that the pH is not always a limiting factor in a biofilm and (2) decreasing pH and increasing redox potential at the biofilm electrode were associated only with the biofilm, demonstrating that G. sulfurreducens biofilms respire in a unique internal environment. Redox potential inside the biofilm was also compared to the local biofilm potential measured by a graphite microelectrode, where the tip of the microelectrode was allowed to acclimatize inside the biofilm.

Duty cycling influences current generation in multi-anode environmental microbial fuel cells

Improving microbial fuel cell (MFC) performance continues to be the subject of research, yet the role of operating conditions, specifically duty cycling, on MFC performance has been modestly addressed. We present a series of studies in which we use a 15-anode environmental MFC to explore how duty cycling (variations in the time an anode is connected) influences cumulative charge, current, and microbial composition. The data reveal particular switching intervals that result in the greatest time-normalized current. When disconnection times are sufficiently short, there is a striking decrease in current due to an increase in the overall electrode reaction resistance. This was observed over a number of whole cell potentials. Based on these results, we posit that replenishment of depleted electron donors within the biofilm and surrounding diffusion layer is necessary for maximum charge transfer, and that proton flux may be not limiting in the highly buffered aqueous phases that are common among environmental MFCs. Surprisingly, microbial diversity analyses found no discernible difference in gross community composition among duty cycling treatments, suggesting that duty cycling itself has little or no effect. Such duty cycling experiments are valuable in determining which factors govern performance of bioelectrochemical systems and might also be used to optimize field-deployed systems.

Biodecolorization of Naphthol Green B dye by Shewanella oneidensis MR-1 under anaerobic conditions

The anaerobic decolorization of metal-complex dye Naphthol Green B (NGB) by a metal-reducing bacterium, Shewanella oneidensis MR-1, was investigated. S. oneidensis MR-1 showed a high capacity for decolorizing NGB even at a concentration of up to 1000mg/L under anaerobic conditions. Maximum decolorization efficiency was appeared at pH 8.0 and 40°C. Addition of iron oxide caused no inhibition to the NGB decolorization, while the presence of ferric citrate, nitrite, or nitrate almost completely terminated the decolorization. Biosynthesis of nanomaterials was observed coupled with the degradation of NGB when thiosulfate was added. The Mtr respiratory pathway was found to be responsible for the decolorization of NGB by S. oneidensis, in which extracellular electron shuttle also plays a positive role in promoting the decolorization.

Enhanced electricity production by use of reconstituted artificial consortia of estuarine bacteria grown as biofilms

Microbial fuel cells (MFCs) can convert organic compounds directly into electricity by catalytic oxidation, and although MFCs have attracted considerable interest, there is little information on the electricity-generating potential of artificial bacterial biofilms. We have used acetate-fed MFCs inoculated with sediment, with two-chamber bottles and carbon cloth electrodes to deliver a maximum power output of ~175 mW · m(-2) and a stable power output of ~105 mW · m(-2). Power production was by direct transfer of electrons to the anode from bacterial consortia growing on the anode, as confirmed by cyclic voltammetry (CV) and scanning electron microscopy (SEM). Twenty different species (74 strains) of bacteria were isolated from the consortium under anaerobic conditions and cultured in the laboratory, of which 34% were found to be exoelectrogens in single-species studies. Exoelectrogenesis by members of the genera Vibrio , Enterobacter , and Citrobacter and by Bacillus stratosphericus was confirmed, by use of culture-based methods, for the first time. An MFC with a natural bacterial consortium showed higher power densities than those obtained with single strains. In addition, the maximum power output could be further increased to ~200 mW · m(-2) when an artificial consortium consisting of the best 25 exoelectrogenic isolates was used, demonstrating the potential for increased performance and underlying the importance of artificial biofilms for increasing power output.

Soluble electron shuttles can mediate energy taxis toward insoluble electron acceptors

Shewanella species grow in widely disparate environments and play key roles in elemental cycling, especially in environments with varied redox conditions. To obtain a system-level understanding of Shewanella's robustness and versatility, the complex interplay of cellular growth, metabolism, and transport under conditions of limiting carbon sources, energy sources, and electron acceptors must be elucidated. In this paper, population-level taxis of Shewanella oneidensis MR-1 cells in the presence of a rate-limiting, insoluble electron acceptor was investigated. A novel mechanism, mediated energy taxis, is proposed by which Shewanella use riboflavin as both an electron shuttle and an attractant to direct cell movement toward local sources of insoluble electron acceptors. The cells secrete reduced riboflavin, which diffuses to a nearby particle containing an insoluble electron acceptor and is oxidized. The oxidized riboflavin then diffuses away from the particle, establishing a spatial gradient that draws cells toward the particle. Experimental and modeling results are presented to support this mechanism. S. oneidensis MR-1 cells inoculated into a uniform dispersion of MnO(2) particles in dilute agar exhibited taxis outward, creating a clear zone within which riboflavin was detected by mass spectrometry. Cells inoculated into dilute agar containing oxidized riboflavin similarly exhibited taxis, rapidly forming an expanding zone of reduced riboflavin. A mathematical model based on the proposed mechanism was able to predict experimental trends, including how concentrations of riboflavin and insoluble electron acceptors (e.g., MnO(2)) affected tactic cell migration.

Menaquinone-7 is specific cofactor in tetraheme quinol dehydrogenase CymA

Little is known about enzymatic quinone-quinol interconversions in the lipid membrane when compared with our knowledge of substrate transformations by globular enzymes. Here, the smallest example of a quinol dehydrogenase in nature, CymA, has been studied. CymA is a monotopic membrane tetraheme c-type cytochrome belonging to the NapC/NirT family and central to anaerobic respiration in Shewanella sp. Using protein-film electrochemistry, it is shown that vesicle-bound menaquinone-7 is not only a substrate for this enzyme but is also required as a cofactor when converting other quinones. Here, we propose that the high concentration of quinones in the membrane negates the evolutionary pressure to create a high affinity active site. However, the instability and reactivity of reaction intermediate, semiquinone, might require a cofactor that functions to minimize damaging side reactions.

Reconstruction of Extracellular Respiratory Pathways for Iron(III) Reduction in Shewanella Oneidensis Strain MR-1

Shewanella oneidensis strain MR-1 is a facultative anaerobic bacterium capable of respiring a multitude of electron acceptors, many of which require the Mtr respiratory pathway. The core Mtr respiratory pathway includes a periplasmic c-type cytochrome (MtrA), an integral outer-membrane β-barrel protein (MtrB), and an outer-membrane-anchored c-type cytochrome (MtrC). Together, these components facilitate transfer of electrons from the c-type cytochrome CymA in the cytoplasmic membrane to electron acceptors at and beyond the outer-membrane. The genes encoding these core proteins have paralogs in the S. oneidensis genome (mtrB and mtrA each have four while mtrC has three) and some of the paralogs of mtrC and mtrA are able to form functional Mtr complexes. We demonstrate that of the additional three mtrB paralogs found in the S. oneidensis genome, only MtrE can replace MtrB to form a functional respiratory pathway to soluble iron(III) citrate. We also evaluate which mtrC/mtrA paralog pairs (a total of 12 combinations) are able to form functional complexes with endogenous levels of mtrB paralog expression. Finally, we reconstruct all possible functional Mtr complexes and test them in a S. oneidensis mutant strain where all paralogs have been eliminated from the genome. We find that each combination tested with the exception of MtrA/MtrE/OmcA is able to reduce iron(III) citrate at a level significantly above background. The results presented here have implications toward the evolution of anaerobic extracellular respiration in Shewanella and for future studies looking to increase the rates of substrate reduction for water treatment, bioremediation, or electricity production.

Molecular Underpinnings of Fe(III) Oxide Reduction by Shewanella Oneidensis MR-1

In the absence of O₂ and other electron acceptors, the Gram-negative bacterium Shewanella oneidensis MR-1 can use ferric [Fe(III)] (oxy)(hydr)oxide minerals as the terminal electron acceptors for anaerobic respiration. At circumneutral pH and in the absence of strong complexing ligands, Fe(III) oxides are relatively insoluble and thus are external to the bacterial cells. S. oneidensis MR-1 and related strains of metal-reducing Shewanella have evolved machinery (i.e., metal-reducing or Mtr pathway) for transferring electrons from the inner-membrane, through the periplasm and across the outer-membrane to the surface of extracellular Fe(III) oxides. The protein components identified to date for the Mtr pathway include CymA, MtrA, MtrB, MtrC, and OmcA. CymA is an inner-membrane tetraheme c-type cytochrome (c-Cyt) that belongs to the NapC/NrfH family of quinol dehydrogenases. It is proposed that CymA oxidizes the quinol in the inner-membrane and transfers the released electrons to MtrA either directly or indirectly through other periplasmic proteins. A decaheme c-Cyt, MtrA is thought to be embedded in the trans outer-membrane and porin-like protein MtrB. Together, MtrAB deliver the electrons through the outer-membrane to the MtrC and OmcA on the outmost bacterial surface. MtrC and OmcA are the outer-membrane decaheme c-Cyts that are translocated across the outer-membrane by the bacterial type II secretion system. Functioning as terminal reductases, MtrC and OmcA can bind the surface of Fe(III) oxides and transfer electrons directly to these minerals via their solvent-exposed hemes. To increase their reaction rates, MtrC and OmcA can use the flavins secreted by S. oneidensis MR-1 cells as diffusible co-factors for reduction of Fe(III) oxides. Because of their extracellular location and broad redox potentials, MtrC and OmcA can also serve as the terminal reductases for soluble forms of Fe(III). In addition to Fe(III) oxides, Mtr pathway is also involved in reduction of manganese oxides and other metals. Although our understanding of the Mtr pathway is still far from complete, it is the best characterized microbial pathway used for extracellular electron exchange. Characterizations of the Mtr pathway have made significant contributions to the molecular understanding of microbial reduction of Fe(III) oxides.

Surface multiheme c-type cytochromes from Thermincola potens and implications for respiratory metal reduction by Gram-positive bacteria

Almost nothing is known about the mechanisms of dissimilatory metal reduction by Gram-positive bacteria, although they may be the dominant species in some environments. Thermincola potens strain JR was isolated from the anode of a microbial fuel cell inoculated with anaerobic digester sludge and operated at 55 °C. Preliminary characterization revealed that T. potens coupled acetate oxidation to the reduction of hydrous ferric oxides (HFO) or anthraquinone-2,6-disulfonate (AQDS), an analog of the redox active components of humic substances. The genome of T. potens was recently sequenced, and the abundance of multiheme c-type cytochromes (MHCs) is unusual for a Gram-positive bacterium. We present evidence from trypsin-shaving LC-MS/MS experiments and surface-enhanced Raman spectroscopy (SERS) that indicates the expression of a number of MHCs during T. potens growth on either HFO or AQDS, and that several MHCs are localized to the cell wall or cell surface. Furthermore, one of the MHCs can be extracted from cells with low pH or denaturants, suggesting a loose association with the cell wall or cell surface. Electron microscopy does not reveal an S-layer, and the precipitation of silver metal on the cell surface is inhibited by cyanide, supporting the involvement of surface-localized redox-active heme proteins in dissimilatory metal reduction. These results provide unique direct evidence for cell wall-associated cytochromes and support MHC involvement in conducting electrons across the cell envelope of a Gram-positive bacterium.

A VOLTAMMETRIC FLAVIN MICROELECTRODE FOR USE IN BIOFILMS

Biofilms used in bioelectrochemical systems are expected to transfer electrons using electron transfer mediators. One mediator type, flavins, which includes flavin mononucleotide, riboflavin, and flavin adenine dinucleotide, has been found to be endogenously produced by Shewanella oneidensis MR-1. However, the presence and concentration of flavins inside a S. oneidensis MR-1 biofilm have never been reported. The goal of this study was to develop a flavin microelectrode capable of measuring flavins inside a living biofilm and apply it to a biofilm which produces flavins. Because flavins are electrochemically active molecules, the flavin microelectrode was based on detection via square-wave voltammetry. The microelectrode consisted of a carbon working electrode with a 10-30 μm tip diameter, a built-in platinum counter electrode, and a Ag/AgCl reference electrode, all enclosed in a glass outer case. The microelectrode was calibrated between 0.1 μM and 10 μM flavins and showed a linear correlation between flavin concentration and peak currents located at -424 mV(Ag/AgCl) on a square-wave voltammogram. We also developed a model to explain the electrochemical mechanism of flavin detection, and to determine the effective surface area of the microelectrode, the standard reduction potential, and the transfer coefficient. We found that the effective surface area of the microelectrode was close to 100 times the projected surface area. The model predicted a standard reduction potential for RF/RFH2 of -419 mV(Ag/AgCl) at 20 °C and a transfer coefficient of 0.45. Lastly, we measured flavin concentration inside a S. oneidensis MR-1 biofilm grown on a glass surface using oxygen as the electron acceptor. The flavin concentration reached 0.7 μM, increasing near the bottom of the biofilm, where no oxygen was present. This shows the possibility that flavins are produced in the anaerobic zone to act as intermediate electron acceptors in the deeper parts of the biofilm, where there is no oxygen.

Electrochemically active biofilms: facts and fiction. A review

This review examines the electrochemical techniques used to study extracellular electron transfer in the electrochemically active biofilms that are used in microbial fuel cells and other bioelectrochemical systems. Electrochemically active biofilms are defined as biofilms that exchange electrons with conductive surfaces: electrodes. Following the electrochemical conventions, and recognizing that electrodes can be considered reactants in these bioelectrochemical processes, biofilms that deliver electrons to the biofilm electrode are called anodic, ie electrode-reducing, biofilms, while biofilms that accept electrons from the biofilm electrode are called cathodic, ie electrode-oxidizing, biofilms. How to grow these electrochemically active biofilms in bioelectrochemical systems is discussed and also the critical choices made in the experimental setup that affect the experimental results. The reactor configurations used in bioelectrochemical systems research are also described and the authors demonstrate how to use selected voltammetric techniques to study extracellular electron transfer in bioelectrochemical systems. Finally, some critical concerns with the proposed electron transfer mechanisms in bioelectrochemical systems are addressed together with the prospects of bioelectrochemical systems as energy-converting and energy-harvesting devices.

Dissimilatory reduction of extracellular electron acceptors in anaerobic respiration

An extension of the respiratory chain to the cell surface is necessary to reduce extracellular electron acceptors like ferric iron or manganese oxides. In the past few years, more and more compounds were revealed to be reduced at the surface of the outer membrane of Gram-negative bacteria, and the list does not seem to have an end so far. Shewanella as well as Geobacter strains are model organisms to discover the biochemistry that enables the dissimilatory reduction of extracellular electron acceptors. In both cases, c-type cytochromes are essential electron-transferring proteins. They make the journey of respiratory electrons from the cytoplasmic membrane through periplasm and over the outer membrane possible. Outer membrane cytochromes have the ability to catalyze the last step of the respiratory chains. Still, recent discoveries provided evidence that they are accompanied by further factors that allow or at least facilitate extracellular reduction. This review gives a condensed overview of our current knowledge of extracellular respiration, highlights recent discoveries, and discusses critically the influence of different strategies for terminal electron transfer reactions.

Monodispersed biocompatible silver sulfide nanoparticles: facile extracellular biosynthesis using the γ-proteobacterium, Shewanella oneidensis

Interest in engineered metal and semiconductor nanocrystallites continues to grow due to their unique size- and shape-dependent optoelectronic, physicochemical and biological properties. Therefore identifying novel non-hazardous nanoparticle synthesis routes that address hydrophilicity, size and shape control and production costs has become a priority. In the present article we report for the first time on the efficient generation of extracellular silver sulfide (Ag₂S) nanoparticles by the metal-reducing bacterium Shewanella oneidensis. The particles are reasonably monodispersed and homogeneously shaped. They are produced under ambient temperatures and pressures at high yield, 85% theoretical maximum. UV-visible and Fourier transform infrared spectroscopy, dynamic light scattering, X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy measurements confirmed the formation, optical and surface properties, purity and crystallinity of the synthesized particles. Further characterization revealed that the particles consist of spheres with a mean diameter of 9±3.5 nm, and are capped by a detachable protein/peptide surface coat. Toxicity assessments of these biogenic Ag₂S nanoparticles on Gram-negative (Escherichia coli and S. oneidensis) and Gram-positive (Bacillus subtilis) bacterial systems, as well as eukaryotic cell lines including mouse lung epithelial (C 10) and macrophage (RAW-264.7) cells, showed that the particles were non-inhibitory and non-cytotoxic to any of these systems. Our results provide a facile, eco-friendly and economical route for the fabrication of technologically important semiconducting Ag₂S nanoparticles. These particles are dispersible and biocompatible, thus providing excellent potential for use in optical imaging, electronic devices and solar cell applications.

Transient storage of electrical charge in biofilms of Shewanella oneidensis MR-1 growing in a microbial fuel cell

Current output of microbial fuel cells (MFCs) depends on a number of engineering variables mainly related to the design of the fuel cell reactor and the materials used. In most cases the engineering of MFCs relies on the premise that for a constant biomass, current output correlates well with the metabolic activity of the cells. In this study we analyze to what extent, MFC output is also affected by the mode of operation, emphasizing how discontinuous operation can affect temporal patterns of current output. The experimental work has been carried out with Shewanella oneidensis MR-1, grown in conventional two-chamber MFCs subject to periodic interruptions of the external circuit. Our results indicate that after closure of the external circuit, current intensity shows a peak that decays back to basal values. The result suggests that the MFC has the ability to store charge during open circuit situations. Further studies using chronoamperometric analyses were carried out using isolated biofilms of Shewanella oneidensis MR-1 developed in a MFC and placed in an electrochemistry chamber in the presence of an electron donor. The results of these studies indicate that the amount of excess current over the basal level released by the biofilm after periods of circuit disconnection is proportional to the duration of the disconnection period up to a maximum of approximately 60 min. The results indicate that biofilms of Shewanella oneidensis MR-1 have the ability to store charge when oxidizing organic substrates in the absence of an external acceptor.

Construction and elementary mode analysis of a metabolic model for Shewanella oneidensis MR-1

A stoichiometric model describing the central metabolism of Shewanella oneidensis MR-1 wild-type and derivative strains was developed and used in elementary mode analysis (EMA). Shewanella oneidensis MR-1 can anaerobically respire a diverse pool of electron acceptors, and may be applied in several biotechnology settings, including bioremediation of toxic metals, electricity generation in microbial fuel cells, and whole-cell biocatalysis. The metabolic model presented here was adapted and verified by comparing the growth phenotypes of 13 single- and 1 double-knockout strains, while considering respiration via aerobic, anaerobic fumarate, and anaerobic metal reduction (Mtr) pathways, and utilizing acetate, n-acetylglucosamine (NAG), or lactate as carbon sources. The gene ppc, which encodes phosphoenolpyruvate carboxylase (Ppc), was determined to be necessary for aerobic growth on NAG and lactate, while not essential for growth on acetate. This suggests that Ppc is the only active anaplerotic enzyme when cultivated on lactate and NAG. The application of regulatory and substrate limitations to EMA has enabled creation of metabolic models that better reflect biological conditions, and significantly reduce the solution space for each condition, facilitating rapid strain optimization. This wild-type model can be easily adapted to include utilization of different carbon sources or secretion of different metabolic products, and allows the prediction of single- and multiple-knockout strains that are expected to operate under defined conditions with increased efficiency when compared to wild type cells.

Lactate oxidation coupled to iron or electrode reduction by Geobacter sulfurreducens PCA

Geobacter sulfurreducens PCA completely oxidized lactate and reduced iron or an electrode, producing pyruvate and acetate intermediates. Compared to the current produced by Shewanella oneidensis MR-1, G. sulfurreducens PCA produced 10-times-higher current levels in lactate-fed microbial electrolysis cells. The kinetic and comparative analyses reported here suggest a prominent role of G. sulfurreducens strains in metal- and electrode-reducing communities supplied with lactate.