Growth of human osteoblast-like cells on alkanethiol on gold self-assembled monolayers: the effect of surface chemistry

Enhanced expression of the osteoblastic phenotype on substrates that modulate fibronectin conformation and integrin receptor binding

Integrins represent the primary mechanism of cell-extracellular matrix interactions and control cell morphology, proliferation, and differentiation. We have previously shown that substrate-dependent modulation of adsorbed fibronectin (Fn) conformation alters alpha5beta1 integrin binding to Fn and directs C2C12 myoblast proliferation and differentiation (Mol. Biol. Cell 10 (1999) 785). The model substrates used in these experiments were bacteriological (untreated) polystyrene (B), tissue culture polystyrene (T), and type-I collagen-coated T (C). In the present study, we examined MC3T3-EI osteoblast-like cell differentiation on Fn-coated B, T, and C substrates. Immunofluorescence staining revealed substrate-dependent differences in integrin alpha5beta1 binding and clustering into focal adhesions (C > T > B), consistent with our previous integrin binding analysis. Alkaline phosphatase activity and matrix mineralization showed substrate-dependent differences (C > T > B, p < 0.05). Similar trends were observed for alkaline phosphatase, osteocalcin, and bone sialoprotein gene expression. Blocking experiments with antibodies directed against Fn completely inhibited matrix mineralization on Fn-coated C, indicating that Fn is critical to expression of the osteoblastic phenotype on this extracellular matrix component. These substrate-dependent differences in osteoblast differentiation correlated with differences in alpha5beta1 binding, suggesting that these differences arise from substrate modulation of integrin-matrix interactions. Substrate-dependent modulation of cell function may provide a versatile mechanism to control cell responses in numerous biomedical applications.

Effect of adsorbed fibronectin concentration on cell adhesion and deformation under shear on hydrophobic surfaces

To facilitate tissue integration with biomaterials proteins and peptides frequently are immobilized on the biomaterial surface. In particular, extracellular matrix proteins--which interact specifically with integrin adhesion receptors on the cell surface--can stimulate initial cell attachment by serving both as a ligand for receptor-mediated attachment and as a stimulant of focal adhesion formation and cytoskeletal reorganization. Consequently, the strength of cell adhesion should depend both on the strength of cell/surface contacts and cytoskeleton-dependent properties of the cell (i.e., morphology, compliance). To examine this dual role of extracellular matrix proteins, murine fibroblasts were seeded onto self-assembled monolayers (SAMs) of dodecanethiolate coated with 0 to 0.45 microg/cm(2) of fibronectin (Fn) and then detached by hydrodynamic shear using a radial-flow chamber (RFC). Cell adhesion was characterized in terms of the critical wall shear stress for detachment (tau(wc)), and the compliance was evaluated from measurements of cell displacement and elongation as a function of the fibronectin concentration. Critical wall shear stress and cell displacement were found to be insensitive to Fn at concentrations below 0.23 microg/cm(2) while above this threshold tau(wc) increased and displacement decreased with increasing Fn concentration. Elongation of the cells in the direction of flow was independent of Fn concentration, but correlated linearly with tau(wc) for Fn densities below 0.23 microg/cm(2). These studies show that Fn concentration affects both tau(wc) and cell displacement under shear, and that tau(wc) is sensitive to cell compliance. In addition, they suggest that the dominant mechanism of cell detachment from hydrophobic substrates involves cell displacement.

Adhesion and growth of electrically active cortical neurons on polyethylenimine patterns microprinted onto PEO-PPO-PEO triblockcopolymer-coated hydrophobic surfaces

This paper describes the adhesion and growth of dissociated cortical neurons on chemically patterned surfaces over a time period of 30 days. The presence of neurons was demonstrated by measurement of spontaneous bioelectrical activity on a micropatterned multielectrode array. Chemical patterns were prepared with a combination of neurophobic layers of polyethylenoxide-polypropylenoxide-polyethylenoxide (PEO-PPO-PEO) triblockcopolymers adsorbed onto hydrophobic surfaces and neurophilic microprinted tracks of polyethylenimine (PEI). Results showed that commercially available PEO-PPO-PEO triblockcopolymers F108 and F127 (Synperonics, ICI) significantly reduced the adhesion of neuronal tissue when adsorbed on hydrophobic Polyimide (PI) and Fluorocarbon (FC) surfaces over a time period of eight days. In general, both F108- and F127-coated PI displayed equal or better neurophobic background properties after 30 days. Viability of neuronal tissue after 30 days on PEI microprinted F108- and F127-coated PI was comparable with relatively high viability factors between 0.9 and 1 (scale from 0 to 1). Summarizing, the strategy to combine the neurophobic adsorbed triblock-copolymers F108 and F127 onto hydrophobic surfaces with neurophilic microprinted PEI resulted in relatively long-term neuronal pattern preservation with high numbers of viable neurons present after 30 days.

Cellulose phosphates as biomaterials. In vivo biocompatibility studies

Femoral implantation of regenerated cellulose hydrogels revealed their biocompatibility, but a complete osseointegration could not be observed. Phosphorylation was therefore envisaged as the means to enhance cellulose bioactivity. In vitro studies showed that regenerated cellulose hydrogels promote bone cells attachment and proliferation but do not mineralize in acellular simulated physiological conditions. On the contrary, phosphorylated cellulose has shown an opposite behavior, by inducing the formation of a calcium phosphate layer in simulated physiological conditions, but behaving as a poor substrate for bone cells attachment and proliferation. In order to investigate the in vivo behavior of these materials, and assess the influence of mineralization induction ability vs. bone cells compatibility, unmodified and phosphorylated cellulose hydrogels were implanted in rabbits for a maximum period of 6 months and bone regeneration was investigated. Despite the difficulties arising from the retraction of cellulose hydrogels upon dehydration during the preparation of retrieved implants, histological observations showed no inflammatory response after implantation, with bone intra-spongious regeneration of cells and the integration of the unmodified as well as the phosphorylated cellulose implants. After a maximum implantation period of 6 months, histological observations, histomorphometry and the measurement of the amount of 45Ca incorporated in the surrounding tissue indicated a slightly better osseointegration of phosphorylated cellulose, although no significant differences between the two materials were found.

Protein adsorption and human osteoblast-like cell attachment and growth on alkylthiol on gold self-assembled monolayers

Protein adsorption and growth of primary human osteoblasts on self-assembled monolayers of alkylthiols on gold (SAMs) with carboxylic acid and hydroxyl and methyl termini were investigated. Single-component SAMs and SAMs patterned by photolithographic techniques were used. Cell growth on patterned SAMs demonstrated preferences for one pattern region in all combinations of alkylthiols, with the hierarchical preference COOH > OH > CH(3). Patterned SAMs and immunochemistry were used to investigate adsorption of fibronectin and albumin with respect to different alkylthiol termini. Fibronectin adsorption from both pure solution and serum containing cell culture medium (SDMEM) followed the sequence COOH > OH > CH(3). Albumin adsorption from pure solution followed the sequence OH > COOH > CH(3); from SDMEM the sequence was CH(3) > OH > COOH. Cell attachment to SAMs with the above termini, after preadsorption with fibronectin, albumin, or mixtures of fibronectin and albumin, was measured. Attachment was maximal on COOH-terminated SAMs precoated with fibronectin. Attachment to COOH was significantly reduced only when fibronectin was omitted from the protein preadsorption solution. On OH and CH(3) SAMs increasing the proportion of albumin in the solution was sufficient to significantly reduce cell attachment. The distribution vinculin and the integrins alpha(5)beta(1) and alpha(v)beta(3) indicated that focal contact formation by cells varied with alkylthiol termini in the following sequence: COOH > OH > CH(3).

Micropatterning of biomedical polymer surfaces by novel UV polymerization techniques

The "living" radical polymerization with an iniferter was used to create micropatterned biomedical surfaces. Novel, photosensitive biomedical polymers were created by the incorporation of dithiocarbamate groups from iniferters. A second monomer layer was then irradiated onto the photosensitive polymer substrate created with the iniferter to form a copolymer. Patterns were created on the films by application of modified microfabrication-based photolithographic techniques. The technique was used to create patterns with depths from 5 to 80 microm. In addition, various polymers were incorporated, including polyethylene glycol methacrylates, styrene, and methacrylic acid, to synthesize regions with different physico-chemical properties. Applications include novel surfaces for biosensors and biomaterials for the selective adhesion of cells and proteins.

Adhesion and patterning of cortical neurons on polyethylenimine- and fluorocarbon-coated surfaces

Adhesion and patterning of cortical neurons was investigated on isolated islands of neuron-adhesive polyethylenimine (PEI) surrounded by a neuron-repellent fluorocarbon (FC) layer. In addition, the development of fasciculated neurites between the PEI-coated areas was studied over a time period of fifteen days. The patterns consisted of PEI-coated wells (diameter 150 microns, depth 0.5 micron) which were etched in a coating of fluorocarbon (FC) on top of polyimide (PI) coated glass. The separation distance between the PEI-coated wells were varied between 10 and 90 microns. This paper shows that chemical patterns of PEI and FC result in highly compliant patterns of adhering cortical neurons after one day in vitro. Interconnecting neurite fascicles between PEI-coated wells were especially present on patterns with a separation distance of 10 microns after eight days in vitro. A significant lower number of interconnecting neurite fascicles was observed on 20 microns separated patterns. Effective isolation of neurons into PEI-coated wells was achieved on patterns with a separation distance of 80 microns as no interconnecting neurite fascicles were observed.

Adhesion and proliferation of corneal epithelial cells on self-assembled monolayers

The effect of surface chemistry on the proliferation and adhesion of SV-40 human corneal epithelial cells was investigated. The surface chemistry of substrates was controlled by the deposition of self-assembled monolayers (SAMs) terminated with the following functional groups: -CF3, -CH3, -CO(2)H, and -NH(2). SAMs of alkanethiols on gold and of alkylsiloxanes on SiOx were included in the study. Comparisons are made between different types and functionalities of SAMs and between SAM-covered substrates and tissue culture polystyrene. Adhesion assays were performed after incubation of the cells for 1 h in 10% fetal bovine serum and in serum-free conditions. The cellular response was found to be a function of surface chemistry and the presence of exogenous proteins. The number of cells that adhered to most of the SAMs in 10% serum and in serum-free conditions was not significantly different from the number of cells that adhered to TCPS. Proliferation assays were carried out in 10% serum and in 0.5% serum. Cell behavior was influenced by surface chemistry but did not deviate significantly from the behavior on TCPS for most of the SAMs. Serum level did not play a major role in cell proliferation. Our data establish the expected behaviors for a corneal epithelial cell line under defined conditions on specific surfaces.

Comparison of proliferation and growth of human keratinocytes on plasma copolymers of acrylic acid/1,7-octadiene and self-assembled monolayers

Human keratinocytes were cultured on plasma copolymers (PCPs), self-assembled monolayers (SAMs), and tissue culture poly(styrene) (TCPS). Plasma copolymerization was used to deposit films with controlled concentrations of carboxylic acid functional groups (<5%). Human keratinocytes were cultured onto these PCP surfaces, TCPS, and collagen I. A hydrocarbon plasma polymer surface was used as the negative control. Keratinocyte attachment was measured at 24 h and cell proliferation and growth at 3 and 7 days using optical microscopy and DNA concentrations. The PCP surfaces were compared with two SAM systems comprising pure acid and pure hydrocarbon functionalities, and pure gold was used as a control surface. PCP surfaces containing carboxylic acid functionalities promoted keratinocyte attachment. The level of attachment on these surfaces was comparable to that seen on collagen I, a preferred substratum for the culturing of keratinocytes. After several days in culture the cells were well attached and proliferative, forming confluent sheets of keratinocytes. This result was confirmed by DNA assays that suggested the acid PCP surfaces were performing as well as collagen I. Keratinocytes attached well to gold and acid-terminated SAMs but attached poorly to methyl-terminated SAMs. The acid functionality also promoted proliferation and growth of keratinocytes after several days in culture. DNA assays revealed that keratinocyte growth on the acid surface was higher than on collagen I.

Alkylsilane-modified surfaces: inhibition of human macrophage adhesion and foreign body giant cell formation

A homologous set of alkylsilane-modified glass surfaces with chain lengths ranging from methyl to octadecyl was prepared in order to examine the influence of alkyl surface chemistry on macrophage adhesion and foreign body giant cell (FBGC) formation. Contact angle and X-ray photoelectron spectroscopy analysis confirmed our silanation technique and indicated a consistent alkyl chain density independent of chain length. Human peripheral blood monocytes were isolated and cultured on these alkylsilane surfaces for a period of 10 days. The initial density of human monocytes was similar on all surfaces. Beyond day 0 the clean glass, methyl (DM and C1), propyl (C3), and hexyl (C6) surfaces maintained a high cell density and supported macrophage development. In contrast, long-term macrophage density was extremely low on the tetradecyl (C14) and octadecyl (C18) surfaces. When interleukin-4 was added to induce FBGC formation in vitro, the DM, C1, C3, and C6 surfaces supported high levels of macrophage fusion while clean glass strongly inhibited fusion. The C14 and C18 surfaces did not contain sufficient macrophages to support FBGC formation. Cage implant studies revealed that in vivo macrophage density and FBGC formation on clean glass and C6 surfaces was similar to in vitro data. In contrast to the monocyte culture results, the C18 cage implant samples supported significant FBGC formation, possibly as a result of different conditions within each experimental system. Radiotracer adsorption studies of eight human serum proteins identified the high concentration and tenacious hold of adsorbed von Willebrand factor as being possibly involved in the poor long-term macrophage density observed on C14 and C18.