Enzyme Directed Templating of Artificial Bone Mineral

Facile synthesis of a biocompatible silver nanoparticle derived tripeptide supramolecular hydrogel for antibacterial wound dressings

Through a mineralization process, Nap-FFC peptides produced transparent silver nanoparticle-based hydrogels (AgNPs@Nap-FFC) for antibacterial wound dressing.

Supramolecular nanofibers of self-assembling peptides and DDP to inhibit cancer cell growth

The addition of cis-dichlorodiamineplatinum(ii) to a taxol-peptide amphiphile results in hydrogelations.

Matrix metalloproteinase-20 mediates dental enamel biomineralization by preventing protein occlusion inside apatite crystals

Reconstruction of enamel-like materials is a central topic of research in dentistry and material sciences. The importance of precise proteolytic mechanisms in amelogenesis to form a hard tissue with more than 95% mineral content has already been reported. A mutation in the Matrix Metalloproteinase-20 (MMP-20) gene results in hypomineralized enamel that is thin, disorganized and breaks from the underlying dentin. We hypothesized that the absence of MMP-20 during amelogenesis results in the occlusion of amelogenin in the enamel hydroxyapatite crystals. We used spectroscopy and electron microscopy techniques to qualitatively and quantitatively analyze occluded proteins within the isolated enamel crystals from MMP-20 null and Wild type (WT) mice. Our results showed that the isolated enamel crystals of MMP-20 null mice had more organic macromolecules occluded inside them than enamel crystals from the WT. The crystal lattice arrangements of MMP-20 null enamel crystals analyzed by High Resolution Transmission Electron Microscopy (HRTEM) were found to be significantly different from those of the WT. Raman studies indicated that the crystallinity of the MMP-20 null enamel crystals was lower than that of the WT. In conclusion, we present a novel functional mechanism of MMP-20, specifically prevention of unwanted organic material entrapped in the forming enamel crystals, which occurs as the result of precise amelogenin cleavage. MMP-20 action guides the growth morphology of the forming hydroxyapatite crystals and enhances their crystallinity. Elucidating such molecular mechanisms can be applied in the design of novel biomaterials for future clinical applications in dental restoration or repair.

Enzymatic Dissolution of Biocomposite Solids Consisting of Phosphopeptides to Form Supramolecular Hydrogels

Enzyme-catalyzed dephosphorylation is essential for biomineralization and bone metabolism. Here we report the exploration of using enzymatic reaction to transform biocomposites of phosphopeptides and calcium (or strontium) ions to supramolecular hydrogels as a mimic of enzymatic dissolution of biominerals. (31) P NMR shows that strong affinity between the phosphopeptides and alkaline metal ions (e.g., Ca(2+) or Sr(2+) ) induces the formation of biocomposites as precipitates. Electron microscopy reveals that the enzymatic reaction regulates the morphological transition from particles to nanofibers. Rheology confirms the formation of a rigid hydrogel. As the first example of enzyme-instructed dissolution of a solid to form supramolecular nanofibers/hydrogels, this work provides an approach to generate soft materials with desired properties, expands the application of supramolecular hydrogelators, and offers insights to control the demineralization of calcified soft tissues.

Beta-Sheet-Forming, Self-Assembled Peptide Nanomaterials towards Optical, Energy, and Healthcare Applications

Peptide self-assembly is an attractive route for the synthesis of intricate organic nanostructures that possess remarkable structural variety and biocompatibility. Recent studies on peptide-based, self-assembled materials have expanded beyond the construction of high-order architectures; they are now reporting new functional materials that have application in the emerging fields such as artificial photosynthesis and rechargeable batteries. Nevertheless, there have been few reviews particularly concentrating on such versatile, emerging applications. Herein, recent advances in the synthesis of self-assembled peptide nanomaterials (e.g., cross β-sheet-based amyloid nanostructures, peptide amphiphiles) are selectively reviewed and their new applications in diverse, interdisciplinary fields are described, ranging from optics and energy storage/conversion to healthcare. The applications of peptide-based self-assembled materials in unconventional fields are also highlighted, such as photoluminescent peptide nanostructures, artificial photosynthetic peptide nanomaterials, and lithium-ion battery components. The relation of such functional materials to the rapidly progressing biomedical applications of peptide self-assembly, which include biosensors/chips and regenerative medicine, are discussed. The combination of strategies shown in these applications would further promote the discovery of novel, functional, small materials.

Composites of gellan gum hydrogel enzymatically mineralized with calcium-zinc phosphate for bone regeneration with antibacterial activity

Gellan gum hydrogels functionalized with alkaline phosphatase were enzymatically mineralized with phosphates in mineralization medium containing calcium (Ca) and zinc (Zn) to improve their suitability as biomaterials for bone regeneration. The aims of the study were to endow mineralized hydrogels with antibacterial activity by incorporation of Zn in the inorganic phase, and to investigate the effect of Zn incorporation on the amount and type of mineral formed, the compressive modulus of the mineralized hydrogels and on their ability to support adhesion and growth of MC3T3-E1 osteoblast-like cells. Mineralization medium contained glycerophosphate (0.05 m) and three different molar Ca:Zn ratios, 0.05:0, 0.04:0.01 and 0.025:0.025 (all mol/dm³ ), hereafter referred to as A, B and C, respectively. FTIR, SAED and TEM analysis revealed that incubation for 14 days caused the formation of predominantly amorphous mineral phases in sample groups A, B and C. The presence of Zn in sample groups B and C was associated with a drop in the amount of mineral formed and a smaller mineral deposit morphology, as observed by SEM. ICP-OES revealed that Zn was preferentially incorporated into mineral compared to Ca. Mechanical testing revealed a decrease in compressive modulus in sample group C. Sample groups B and C, but not A, showed antibacterial activity against biofilm-forming, methicillin-resistant Staphylococcus aureus. All sample groups supported cell growth. Zn incorporation increased the viable cell number. The highest values were seen on sample group C. In conclusion, the sample group containing the most Zn, i.e. group C, appears to be the most promising. Copyright © 2015 John Wiley & Sons, Ltd.

Self-assembly of a dual functional bioactive peptide amphiphile incorporating both matrix metalloprotease substrate and cell adhesion motifs

We describe a bioactive lipopeptide that combines the capacity to promote the adhesion and subsequent self-detachment of live cells, using template-cell-environment feedback interactions. This self-assembling peptide amphiphile comprises a diene-containing hexadecyl lipid chain (C16e) linked to a matrix metalloprotease-cleavable sequence, Thr-Pro-Gly-Pro-Gln-Gly-Ile-Ala-Gly-Gln, and contiguous with a cell-attachment and signalling motif, Arg-Gly-Asp-Ser. Biophysical characterisation revealed that the PA self-assembles into 3 nm diameter spherical micelles above a critical aggregation concentration (cac). In addition, when used in solution at 5-150 nM (well below the cac), the PA is capable of forming film coatings that provide a stable surface for human corneal fibroblasts to attach and grow. Furthermore, these coatings were demonstrated to be sensitive to metalloproteases expressed endogenously by the attached cells, and consequently to elicit the controlled detachment of cells without compromising their viability. As such, this material constitutes a novel class of multi-functional coating for both fundamental and clinical applications in tissue engineering.

Biocompatibility and characterization of a peptide amphiphile hydrogel for applications in peripheral nerve regeneration

Peripheral nerve injury is a debilitating condition for which new bioengineering solutions are needed. Autografting, the gold standard in treatment, involves sacrifice of a healthy nerve and results in loss of sensation or function at the donor site. One alternative solution to autografting is to use a nerve guide conduit designed to physically guide the nerve as it regenerates across the injury gap. Such conduits are effective for short gap injuries, but fail to surpass autografting in long gap injuries. One strategy to enhance regeneration inside conduits in long gap injuries is to fill the guide conduits with a hydrogel to mimic the native extracellular matrix found in peripheral nerves. In this work, a peptide amphiphile (PA)-based hydrogel was optimized for peripheral nerve repair. Hydrogels consisting of the PA C₁₆GSH were compared with a commercially available collagen gel. Schwann cells, a cell type important in the peripheral nerve regenerative cascade, were able to spread, proliferate, and migrate better on C₁₆GSH gels in vitro when compared with cells seeded on collagen gels. Moreover, C₁₆GSH gels were implanted subcutaneously in a murine model and were found to be biocompatible, degrade over time, and support angiogenesis without causing inflammation or a foreign body immune response. Taken together, these results help optimize and instruct the development of a new synthetic hydrogel as a luminal filler for conduit-mediated peripheral nerve repair.

Zinc-triggered hydrogelation of self-assembled small molecules to inhibit bacterial growth

There is a significant need to develop antibacterial materials that could be applied locally and directly to the places surrounded by large amount of bacteria, in order to address the problems of bacterial antibiotic-resistance or irreversible biofilm formation. Hydrogels are thought to be suitable candidates due to their versatile applications in biomedical field. Among them, small molecular hydrogels have been paid lots of attention because they are easy to design and fabricate and often sensitive to external stimuli. Meanwhile, the antibacterial activity of metal ions are attracting more and more attention because resistance to them are not yet found within bacteria. We therefore designed the zinc ion binding peptide of Nap-GFFYGGGHGRGD, who can self-assemble into hydrogels after binds Zn(2+) and inhibit the growth of bacteria due to the excellent antibacterial activity of Zn(2+). Upon the addition of zinc ions, solutions containing Nap-GFFYGGGHGRGD transformed into supramolecular hydrogels composed of network of long nano-fibers. Bacterial tests revealed an antibacterial effect of the zinc triggered hydrogels on E. coli. The studied small molecular hydrogel shows great potential in locally addressing bacterial infections.

Towards the sequence-specific multivalent molecular recognition of cyclodextrin oligomers

Sequence-specific multivalent molecular recognition has been recognized to play a major role in biological processes. Furthermore, sequence-specific recognition motifs have been used in various artificial systems in the last years, e.g., to emulate biological processes or to build up new materials with highly specific recognition domains. In this article, we present the preparation of cyclodextrin (CD)-based strands and complementary and non-complementary strands modified with guest molecules and the investigation of their complexation behavior towards each other by isothermal titration calorimetry (ITC). As complementary binding motifs n-butyl and α-CD and adamantane and β-CD were selected. It was found that it is possible to realize sequence-specific molecular recognition by the use of host–guest chemistry, but the recognition motifs as well as the linkages have to be chosen very carefully. In the case of trivalent systems one adamantane moiety must be included to induce preferred formation of 1:1 adducts. Due to the too weak interaction between n-butyl and α-CD these systems have a negative chelate cooperativity and open adducts are preferentially formed. As soon as two adamantane moieties are present, the complementary systems have a positive chelate cooperativity and double-stranded structures are favored over open adducts. In this system the n-butyl moiety provides insufficient discrimination towards α- and β-CD and no sequence specificity is observed. By the combination of three adamantane moieties sequence specificity can be generated. Exclusively with the complementary CD sequence double-stranded structures are formed, with non-complementary strands aggregates of higher stoichiometry are generated.

Hybrid nanotopographical surfaces obtained by biomimetic mineralization of statherin-inspired elastin-like recombinamers

Modification of surfaces mimicking unique chemical and physical features of mineralized tissues is of major interest for obtaining biomaterials for replacing and regenerating biological tissues. Here, human salivary statherin-inspired genetically engineered recombinamers (ELRs, HSS) on biomedical surfaces regulates mineralization to form an amorphous-calcium-phosphate (ACP) layer that reproduces the original substrate nanotopography. The HSS-ELRs carry a statherin-derived peptide with high affinity to tooth enamel. They are tethered to nanorough surfaces and mineralized using an enzyme-directed process. A homogeneous layer of ACP-minerals forms on HSS-coated surfaces retaining the original nanotopography of the substrate. In contrast, biomineralization of control surfaces results in uncontrolled growth of minerals. This suggest the statherin-inspired ELRs have ability to induce and control growth of the minerals on the biofunctional surfaces. Likely, the HSS-ELR coating have similar bioactivity to that of statherin in human saliva. The hybrid nanorough surfaces improve adhesion and differentiation of preosteoblasts and show potential for dental and orthopedic implants integration. This method enables the combination and tailoring of nanotopographical and biochemical cues to design functionalized surfaces to investigate and potentially direct the stem cell fate.

Supramolecular assembly of asymmetric self-neutralizing amphiphilic peptide wedges

Mimicking the remarkable dynamic and multifunctional utility of biological nanofibers, such as microtubules, is a challenging and technologically attractive objective in synthetic supramolecular chemistry. Understanding the complex molecular interactions that govern the assembly of synthetic materials, such as peptides, is key to meeting this challenge. Using molecular dynamics simulations to guide molecular design, we explore here the self-assembly of structurally and functionally asymmetric wedge-shaped peptides. Supramolecular assembly into nanofiber gels or multilayered lamellar structures was determined by cooperative influences of hydrogen bonding, amphiphilicity (hydrophilic asymmetry), and the distribution of electrostatic charges on the aqueous self-assembly of asymmetric peptides. Molecular amphiphilicity and β-sheet forming capacity were both identified as necessary, but not independently sufficient, to form supramolecular nanofibers. Imbalances in positive and negative charges prevented nanofiber assembly, while the asymmetric distribution of balanced charges within a peptide is believed to affect peptide conformation and subsequent self-assembly into either nanofibers or lamellar structures. Insights into cooperative molecular interactions and the effects of molecular asymmetry on assembly may aid the development of next-generation supramolecular nanomaterial assemblies.

Generation of composites for bone tissue-engineering applications consisting of gellan gum hydrogels mineralized with calcium and magnesium phosphate phases by enzymatic means

Mineralization of hydrogels, desirable for bone regeneration applications, may be achieved enzymatically by incorporation of alkaline phosphatase (ALP). ALP-loaded gellan gum (GG) hydrogels were mineralized by incubation in mineralization media containing calcium and/or magnesium glycerophosphate (CaGP, MgGP). Mineralization media with CaGP:MgGP concentrations 0.1:0, 0.075:0.025, 0.05:0.05, 0.025:0.075 and 0:0.1 (all values mol/dm³ , denoted A, B, C, D and E, respectively) were compared. Mineral formation was confirmed by IR and Raman, SEM, ICP-OES, XRD, TEM, SAED, TGA and increases in the the mass fraction of the hydrogel not consisting of water. Ca was incorporated into mineral to a greater extent than Mg in samples mineralized in media A-D. Mg content and amorphicity of mineral formed increased in the order A < B < C < D. Mineral formed in media A and B was calcium-deficient hydroxyapatite (CDHA). Mineral formed in medium C was a combination of CDHA and an amorphous phase. Mineral formed in medium D was an amorphous phase. Mineral formed in medium E was a combination of crystalline and amorphous MgP. Young's moduli and storage moduli decreased in dependence of mineralization medium in the order A > B > C > D, but were significantly higher for samples mineralized in medium E. The attachment and vitality of osteoblastic MC3T3-E1 cells were higher on samples mineralized in media B-E (containing Mg) than in those mineralized in medium A (not containing Mg). All samples underwent degradation and supported the adhesion of RAW 264.7 monocytic cells, and samples mineralized in media A and B supported osteoclast-like cell formation. Copyright © 2014 John Wiley & Sons, Ltd.

Environment-sensitive fluorescent supramolecular nanofibers for imaging applications

The combination of an environment-sensitive fluorophore, 4-nitro-2,1,3-benzoxadiazole (NBD), and peptides have yielded supramolecular nanofibers with enhanced cellular uptake, brighter fluorescence, and significant fluorescence responses to external stimuli. We had designed and synthesized NBD-FFYEEGGH that can form supramolecular nanofibers and emit brighter than its counterpart of NBD-EEGGH without the self-assembling property. The nanofibers of NBD-FFYEEGGH could specifically bind to Cu(2+), leading to the formation of fluorescence quenched elongated nanofibers. This fluorescence quenching property was enhanced in self-assembling nanofibers and could be applied for detection of Cu(2+) in vitro and within cells. In a further step, an enzyme-cleavable DEVD peptide was placed between NBD-FFY and the copper binding tripeptide GGH. The resulting self-assembling peptide NBD-FFFDEVDGGH also showed strong fluorescence quenching to Cu(2+). Upon the enzymatic cleavage to remove the Cu(2+)-binding GGH tripeptide from the peptide, the fluorescence was restored. The cellular uptake of nanofibers was better than that of free molecules because of endocytosis. The supramolecular nanofibers with fluorescence turn-on property could therefore be applied for detection of caspase-3 activity in vitro and within cells. We believe that the combination of environment-sensitive fluorescence and fast responses of supramolecular nanostructures would lead to a useful platform to detect many important analytes.

Biocatalytic self-assembly of nanostructured peptide microparticles using droplet microfluidics

Uniformly-sized, nanostructured peptide microparticles are generated by exploiting the ability of enzymes to serve (i) as catalysts, to control self-assembly within monodisperse, surfactant-stabilized water-in-oil microdroplets, and (ii) as destabilizers of emulsion interfaces, to enable facile transfer of the produced microparticles to water. This approach combines the advantages of biocatalytic self-assembly with the compartmentalization properties enabled by droplet microfluidics. Firstly, using microfluidic techniques, precursors of self-assembling peptide derivatives and enzymes are mixed in the microdroplets which upon catalytic conversion undergo molecular self-assembly into peptide particles, depending on the chemical nature of the precursors. Due to their amphiphilic nature, enzymes adsorb at the water-surfactant-oil interface of the droplets, inducing the transfer of peptide microparticles from the oil to the aqueous phase. Ultimately, through washing steps, enzymes can be removed from the microparticles which results in uniformely-sized particles composed of nanostructured aromatic peptide amphiphiles.

Biomimetic graphene oxide–hydroxyapatite composites via in situ mineralization and hierarchical assembly

A graphene oxide (GO)–hydroxyapatite (HAP) hybrid with excellent mechanical properties and biocompatibility is synthesized via in situ mineralization and hierarchical assembly.

Additive manufacturing of cell-loaded alginate enriched with alkaline phosphatase for bone tissue engineering application

Hydrogels are gaining interest as scaffolds for bone tissue regeneration due to ease of incorporation of cells and biological molecules such as enzymes. Mineralization of hydrogels, desirable for bone tissue regeneration applications, may be achieved enzymatically by incorporation of alkaline phosphatase (ALP). Additive manufacturing techniques such as bioplotting enable the layer-by-layer creation of three-dimensional hydrogel scaffolds with highly defined geometry and internal architecture. In this study, we present a novel method to produce macroporous hydrogel scaffolds in combination with cell-loaded capsule-containing struts by 3D bioplotting. This approach enables loading of the capsules and strut phases with different cells and/or bioactive substances and hence makes compartmentalization within a scaffold possible. 3D porous alginate scaffolds enriched with ALP and MG-63 osteoblast-like cells were produced by bioplotting struts of alginate which were loaded with pre-fabricated alginate capsules. Two combinations were compared, namely ALP in the struts and cells in the capsules and vice-versa. Both combinations were cytocompatible for cells and mineralization of scaffolds could be detected in both cases, according to an OsteoImage staining. ALP had no adverse effect on cytocompatibility and enhanced mitochondrial activity.

Self-assembly to function: design, synthesis, and broad spectrum antimicrobial properties of short hybrid E-vinylogous lipopeptides

Nonribosomal E-vinylogous γ-amino acids are widely present in many peptide natural products and have been exploited as inhibitors for serine and cysteine proteases. Here, we are reporting the broad spectrum antimicrobial properties and self-assembled nanostructures of various hybrid lipopeptides composed of 1:1 alternating α- and E-vinylogous residues. Analysis of the results revealed that self-assembled nanostructures also play a significant role in the antimicrobial and hemolytic activities. In contrast to the α-peptide counterparts, vinylogous hybrid peptides displayed excellent antimicrobial properties against various bacterial and fungal strains. Peptides that adopted nanofiber structures displayed less hemolytic activity, while peptides that adopted nanoneedle structures displayed the highest hemolytic activity.

Supramolecular Nanofibers of Peptide Amphiphiles for Medicine

Peptide nanostructures are an exciting class of supramolecular systems that can be designed for novel therapies with great potential in advanced medicine. This paper reviews progress on nanostructures based on peptide amphiphiles capable of forming one-dimensional assemblies that emulate in structure the nanofibers present in extracellular matrices. These systems are highly tunable using supramolecular chemistry, and can be designed to signal cells directly with bioactive peptides. Peptide amphiphile nanofibers can also be used to multiplex functions through co-assembly and designed to deliver proteins, nucleic acids, drugs, or cells. We illustrate here the functionality of these systems describing their use in regenerative medicine of bone, cartilage, the nervous system, the cardiovascular system, and other tissues. In addition, we highlight recent work on the use of peptide amphiphile assemblies to create hierarchical biomimetic structures with order beyond the nanoscale, and also discuss the future prospects of these supramolecular systems.

Naturally and synthetic smart composite biomaterials for tissue regeneration

The development of smart biomaterials for tissue regeneration has become the focus of intense research interest. More opportunities are available by the composite approach of combining the biomaterials in the form of biopolymers and/or bioceramics either synthetic or natural. Strategies to provide smart capabilities to the composite biomaterials primarily seek to achieve matrices that are instructive/inductive to cells, or that stimulate/trigger target cell responses that are crucial in the tissue regeneration processes. Here, we review in-depth, recent developments concerning smart composite biomaterials available for delivery systems of biofactors and cells and scaffolding matrices in tissue engineering. Smart composite designs are possible by modulating the bulk and surface properties that mimic the native tissues, either in chemical (extracellular matrix molecules) or in physical properties (e.g. stiffness), or by introducing external therapeutic molecules (drugs, proteins and genes) within the structure in a way that allows sustainable and controllable delivery, even time-dependent and sequential delivery of multiple biofactors. Responsiveness to internal or external stimuli, including pH, temperature, ionic strength, and magnetism, is another promising means to improve the multifunctionality in smart scaffolds with on-demand delivery potential. These approaches will provide the next-generation platforms for designing three-dimensional matrices and delivery systems for tissue regenerative applications.

Photodynamic control of bioactivity in a nanofiber matrix

Self-assembling peptide materials have been used extensively to mimic natural extracellular matrices (ECMs) by presenting bioactive epitopes on a synthetic matrix. Although this approach can facilitate a desired response from cells grown in the matrix, it lacks the capacity for spatial or temporal regulation of the presented signals. We describe here a photoresponsive, synthetic ECM using a supramolecular platform composed of peptide amphiphiles (PAs) that self-assemble into cylindrical nanofibers. A photocleavable nitrobenzyl ester group was included in the peptide backbone using a novel Fmoc-amino acid that is compatible with microwave-assisted solid-phase peptide synthesis. The placement of the photolabile group on the peptide backbone enabled efficient removal of the ECM-derived cell adhesion epitope RGDS from PA molecules upon exposure to light (half-life of photolysis ~1.9 min) without affecting the nanofiber assembly. Fibroblasts cultured on RGDS-presenting PA nanofiber substrates demonstrated increased cell spreading and more mature focal adhesions compared with unfunctionalized and control (RGES-presenting) surfaces, as determined by immunostaining and cell morphological analysis. Furthermore, we observed an arrest in fibroblast spreading on substrates containing a cleavable RGDS epitope when the culture was exposed to light; in contrast, this dynamic shift in cell response was absent when the RGDS epitope was attached to the PA molecule by a light-insensitive control linker. Light-responsive bioactive materials can contribute to the development of synthetic systems that more closely mimic the dynamic nature of native ECM.

The role of nanoscale architecture in supramolecular templating of biomimetic hydroxyapatite mineralization

Understanding and mimicking the hierarchical structure of mineralized tissue is a challenge in the field of biomineralization and is important for the development of scaffolds to guide bone regeneration. Bone is a remarkable tissue with an organic matrix comprised of aligned collagen bundles embedded with nanometer-sized inorganic hydroxyapatite (HAP) crystals that exhibit orientation on the macroscale. Hybrid organic-inorganic structures mimic the composition of mineralized tissue for functional bone scaffolds, but the relationship between morphology of the organic matrix and orientation of mineral is poorly understood. Herein the mineralization of supramolecular peptide amphiphile templates, that are designed to vary in nanoscale morphology by altering the amino acid sequence, is reported. It is found that 1D cylindrical nanostructures direct the growth of oriented HAP crystals, while flatter nanostructures fail to guide the orientation found in biological systems. The geometric constraints associated with the morphology of the nanostructures may effectively control HAP nucleation and growth. Additionally, the mineralization of macroscopically aligned bundles of the nanoscale assemblies to create hierarchically ordered scaffolds is explored. Again, it is found that only aligned gel templates of cylindrical nanostructures lead to hierarchical control over hydroxyapatite orientation across multiple length scales as found in bone.

Mineralization of peptide amphiphile nanofibers and its effect on the differentiation of human mesenchymal stem cells

One of the important targets in regenerative medicine is to design resorbable materials that can promote formation of new bone in large skeletal defects. One approach to this challenge is to use a bioactive and biodegradable organic matrix that can promote cellular adhesion and direct differentiation. We have here studied matrices composed of peptide amphiphiles (PAs) that self-assemble into nanofibers and create self-supporting gels under cell culture conditions. The bioactivity of PAs was designed by incorporating in their peptide sequences phosphoserine residues, to promote hydroxyapatite formation in the culture medium, and the cell adhesion epitope RGDS. In osteogenic medium supplemented with calcium the PA nanofibers were found to nucleate spheroidal nanoparticles of crystalline carbonated hydroxyapatite approximately 100 nm in diameter. This mineralization mode is not epitaxial relative to the long axis of the nanofibers and occurs in the presence of serine or phosphoserine residues in the peptide sequence of the amphiphiles. Mixing of the phosphoserine-containing PAs with 5 wt.% RGDS-containing PA molecules does not inhibit formation of the mineral nanoparticles. Quantitative real time reverse transcription polymerase chain reaction and immunohistochemistry analysis for alkaline phosphatase (ALP) and osteopontin expression suggest that these mineralized matrices promote osteogenic differentiation of human mesenchymal stem cells. Based on ALP expression, the presence of phosphoserine residues in PA nanofibers seems to favor osteogenic differentiation.

Osteogenic differentiation of bone marrow mesenchymal stem cells on the collagen/silk fibroin bi-template-induced biomimetic bone substitutes

Biomimetic bone substitutes of collagen-silk fibroin/hydroxyapatite (COL-SF/HA) were synthesized via a bi-template-induced coassembly strategy. Collagen-hydroxyapatite (COL-HA) and silk fibroin-hydroxyapatite (SF-HA) served as controls were prepared with similar method. The osteogenic differentiation ability of bone marrow mesenchymal stem cells (BMSCs) seeded onto the resulting materials was evaluated both in vitro and in vivo. The results suggested that the bi-template-induced biomimetic substitutes were able to support the growth and proliferation of BMSCs. We further demonstrated that BMSCs were stimulated to differentiate into the osteoblast cell lineage by evaluating several specific osteogenic markers including staining of alkaline phosphate (ALP) and calcium nodular and expression of osteogenic genes of osteocalcin (OCN) and osteonectin (ONN). The rat femoral defect model was used to assess the aforementioned biomimetic bone substitutes combined with BMSCs in vivo. Histological analysis indicated that the bi-template material exhibited good biocompatibility and strong ability of the new bone formation in comparison with the control of single-template material in vivo.

Enzymatic mineralization of hydrogels for bone tissue engineering by incorporation of alkaline phosphatase

Alkaline phosphatase (ALP), an enzyme involved in mineralization of bone, is incorporated into three hydrogel biomaterials to induce their mineralization with calcium phosphate (CaP). These are collagen type I, a mussel-protein-inspired adhesive consisting of PEG substituted with catechol groups, cPEG, and the PEG/fumaric acid copolymer OPF. After incubation in Ca-GP solution, FTIR, EDS, SEM, XRD, SAED, ICP-OES, and von Kossa staining confirm CaP formation. The amount of mineral formed decreases in the order cPEG > collagen > OPF. The mineral:polymer ratio decreases in the order collagen > cPEG > OPF. Mineralization increases Young's modulus, most profoundly for cPEG. Such enzymatically mineralized hydrogel/CaP composites may find application as bone regeneration materials.