Molybdenum Oxides - From Fundamentals to Functionality

Insights of Fe2O3 and MoO3 Electrodes for Electrocatalytic CO2 Reduction in Aprotic Media

Transition metal oxides (TMO) have been successfully used as electrocatalytically active materials for CO2 reduction in some studies. Because of the lack of understanding of the catalytic behavior of TMOs, electrochemical methods are used to investigate the CO2 reduction in thin-film nanostructured electrodes. In this context, nanostructured thin films of Fe2O3 and MoO3 in an aprotic medium of acetonitrile have been used to study the CO2 reduction reaction. In addition, a synergistic effect between CO2 and the TMO surface is observed. Faradic cathodic processes not only start at lower potentials than those reported with metal electrodes, but also an increase in capacitive currents is observed, which is directly related to an increase in oxygen vacancies. Finally, the results obtained show CO as a product of the reduction.

A strategy for anode modification for future zinc-based battery application

In the past several years, rechargeable zinc batteries, featuring the merits of low cost, environmental friendliness, easy manufacturing, and enhanced safety, have, attracted much attention. Zinc (Zn) anodes for zinc metal batteries play an important role. In this review, the fundamental understanding of these batteries and modification strategies to deal with the problematic issues for Zn anodes, including dendrite growth, corrosion, and the hydrogen evolution phenomenon will be summarized. The practical application of Zn anodes can still lead to Zn dendrites, various side reactions, and serious safety risks. Therefore, metal-free anodes for "rocking chair" zinc ion batteries to replace Zn anodes are systemically reviewed. The performance and the zinc storage mechanism of metal-free anodes will be discussed. Subsequently, a "rocking chair" zinc ion battery prototype selected as a recent example is assessed to explore the merits and demerits of Zn anodes and metal-free anodes. To conclude, a perspective on the future of zinc metal batteries and "rocking chair" zinc ion batteries is presented. It is hoped that this review may provide for further improvement of commercial rechargeable zinc batteries.

MoS2 oxidative etching caught in the act: formation of single (MoO3) n molecules

We report the presence of sub-nm MoO x clusters formed on basal planes of the 2H MoS2 crystals during thermal oxidative etching in air at a temperature of 370 °C. Using high resolution non-contact atomic force microscopy (AFM) we provide a histogram of their preferred heights. The AFM results combined with density functional theory (DFT) simulations show remarkably well that the MoO x clusters are predominantly single MoO3 molecules and their dimers at the sulfur vacancies. Additional Raman spectroscopy, and energy and wavelength dispersive X-ray spectroscopies as well as Kelvin probe AFM investigations confirmed the presence of the MoO3/MoO x species covering the MoS2 surface only sparsely. The X-ray absorption near edge spectroscopy data confirm the MoO3 stoichiometry. Taken together, our results show that oxidative etching and removal of Mo atoms at the atomic level follow predominantly via formation of single MoO3 molecules. Such findings confirm the previously only proposed oxidative etching stoichiometry.

Plasmonic metal oxides and their biological applications

Metal oxides modified with dopants and defects are an emerging class of novel materials supporting the localized surface plasmon resonance across a wide range of optical wavelengths, which have attracted tremendous research interest particularly in biological applications in the past decade. Compared to conventional noble metal-based plasmonic materials, plasmonic metal oxides are particularly favored for their cost efficiency, flexible plasmonic properties, and improved biocompatibility, which can be important to accelerate their practical implementation. In this review, we first explicate the origin of plasmonics in dopant/defect-enabled metal oxides and their associated tunable localized surface plasmon resonance through the conventional Mie-Gans model. The research progress of dopant incorporation and defect generation in metal oxide hosts, including both in situ and ex situ approaches, is critically discussed. The implementation of plasmonic metal oxides in biological applications in terms of therapy, imaging, and sensing is summarized, in which the uniqueness of dopant/defect-driven plasmonics for inducing novel functionalities is particularly emphasized. This review may provide insightful guidance for developing next-generation plasmonic devices for human health monitoring, diagnosis and therapy.

Enhanced Room Temperature Ammonia Gas Sensing Properties of Fe-Doped MoO3 Thin Films Fabricated Using Nebulizer Spray Pyrolysis

MoO₃ thin films are fabricated using nebulizer spray pyrolysis technique, which is doped with Fe at various concentrations of 1, 2, 3, and 4% for ammonia gas sensors application at room temperature. X-ray diffraction (XRD) study confirms the growth of the crystal by Fe doping up to 3%, nano rods shape morphology of the thin film samples observed by field emission scanning electron microscope (FESEM), reduction in bandgap is evidenced via UV-VIS spectrophotometer. Gas sensing study is performed using gas analyzing chamber attached with Keithley source meter. Since 3% Fe doped MoO₃ sample displayed nano rods over the film surface which exhibits highest sensitivity of 38,500%, in a short period of raise and decay time 54 and 6 s. Our findings confirms that the 3% Fe doped MoO₃ films suitability for ammonia gas sensing application.

Charge Separation by Creating Band Bending in Metal-Organic Frameworks for Improved Photocatalytic Hydrogen Evolution

Metal-organic frameworks (MOFs) have been intensively studied as a class of semiconductor-like materials in photocatalysis. However, band bending, which plays a crucial role in semiconductor photocatalysis, has not yet been demonstrated in MOF photocatalysts. Herein, a representative MOF, MIL-125-NH₂ , is integrated with the metal oxides (MoO₃ and V₂ O₅ ) that feature appropriate work functions and energy levels to afford the corresponding MOF composites. Surface photovoltage results demonstrate band bending in the MOF composites, which gives rise to the built-in electric field of MIL-125-NH₂ , boosting the charge separation. As a result, the MOF composites present 56 and 42 times higher activities, respectively, compared to the pristine MOF for photocatalytic H₂ production. Upon depositing Pt onto the MOF, ∼6 times higher activity is achieved. This work illustrates band bending of MOFs for the first time, supporting their semiconductor-like nature, which would greatly promote MOF photocatalysis.

Electrochemical Proton Storage: From Fundamental Understanding to Materials to Devices

Simultaneously improving the energy density and power density of electrochemical energy storage systems is the ultimate goal of electrochemical energy storage technology. An effective strategy to achieve this goal is to take advantage of the high capacity and rapid kinetics of electrochemical proton storage to break through the power limit of batteries and the energy limit of capacitors. This article aims to review the research progress on the physicochemical properties, electrochemical performance, and reaction mechanisms of electrode materials for electrochemical proton storage. According to the different charge storage mechanisms, the surface redox, intercalation, and conversion materials are classified and introduced in detail, where the influence of crystal water and other nanostructures on the migration kinetics of protons is clarified. Several reported advanced full cell devices are summarized to promote the commercialization of electrochemical proton storage. Finally, this review provides a framework for research directions of charge storage mechanism, basic principles of material structure design, construction strategies of full cell device, and goals of practical application for electrochemical proton storage.

Quasi-two-dimensional α-molybdenum oxide thin film prepared by magnetron sputtering for neuromorphic computing

Two-dimensional (2D) layered materials have attracted intensive attention in recent years due to their rich physical properties, and shown great promise due to their low power consumption and high integration density in integrated electronics. However, mostly limited to mechanical exfoliation, large scale preparation of the 2D materials for application is still challenging. Herein, quasi-2D α-molybdenum oxide (α-MoO3) thin film with an area larger than 100 cm2 was fabricated by magnetron sputtering, which is compatible with modern semiconductor industry. An all-solid-state synaptic transistor based on this α-MoO3 thin film is designed and fabricated. Interestingly, by proton intercalation/deintercalation, the α-MoO3 channel shows a reversible conductance modulation of about four orders. Several indispensable synaptic behaviors, such as potentiation/depression and short-term/long-term plasticity, are successfully demonstrated in this synaptic device. In addition, multilevel data storage has been achieved. Supervised pattern recognition with high recognition accuracy is demonstrated in a three-layer artificial neural network constructed on this α-MoO3 based synaptic transistor. This work can pave the way for large scale production of the α-MoO3 thin film for practical application in intelligent devices.

Synthesis and Characterization of Highly Photocatalytic Active Ce and Cu Co-Doped Novel Spray Pyrolysis Developed MoO3 Films for Photocatalytic Degradation of Eosin-Y Dye

The current work deals with the fabrication of novel MoO3 nanostructured films with Ce and Cu co-doping through the spray pyrolysis route on a glass substrate maintained at 460 °C for the first time. The phase of developed films was approved by an X-ray diffraction study, and the crystallite size was determined between 82 and 92 nm. The optical transmission of the developed films was noticed to be reduced with doping and found between 45 and 90% for all films, and the absorption edge shifted to a higher wavelength with doping. The optical energy gap of the fabricated films was found to be reduced from 3.85 to 3.28 eV with doping. The developed films were used to degrade the harmful Eosin-Y dye under UV light. The system with 2% Ce and 1% Cu-doped MoO3 turned out to be the most effective catalyst for photodegradation of the dye in a period of 3H and almost degrade it. Hence, the MoO3 films prepared with 2% Ce and 1% Cu will be highly applicable as photocatalysts for the removal of hazardous dye from wastewater.

Highly Responsive Pd-Decorated MoO3 Nanowall H2 Gas Sensors Obtained from In-Situ-Controlled Thermal Oxidation of Sputtered MoS2 Films

Among transition metal oxides, MoO₃ is a promising material due to its layered structure and different oxidation states, making it suitable for different device applications. One of the methods used to grow MoO₃ is radio frequency magnetron sputtering (RFMS), which is the most compatible method in industry. However, obtaining nanostructures by RFMS for metal oxides is challenging because of compact morphology film formation. In this study, α-MoO₃ with vertical nanowalls is obtained by a two-step process; deposition of magnetron-sputtered MoS₂ vertical nanowalls and postoxidation of these structures without changing the morphology. In situ transmittance and electrical measurements are performed to control the oxidation process, which shed light on understanding the oxidation of MoS₂ nanowalls. The transition from MoS₂ to α-MoO₃ is investigated with partially oxidized MoS₂/MoO₃ samples with different thicknesses. It is also concluded that oxidation starts from nanowalls perpendicular to the substrate and lasts with oxidation of basal planes. Four different thicknesses of α-MoO₃ nanowall samples are fabricated for H₂ gas sensors. Also, the effect of Pd deposition on the H₂-sensing properties of sensors is deeply investigated. An outstanding response of 3.3 × 10⁵ as well as the response and recovery times of 379 and 304 s, respectively, are achieved from the thinnest Pd-loaded sample. Also, the gas-sensing mechanism is explored by gasochromic measurements to investigate the sensor behaviors under the conditions of dry air and N₂ gas as the carrier gas.

Correlation of the crystal structure and ion storage behavior of MoO3 electrode materials for aluminum-ion energy storage studied using in situ X-ray spectroscopy

To characterize the correlation of the crystal structure and Al-ion storage behavior, we prepared various crystal structures of MoO₃ (α-MoO₃, β-MoO₃ and h-MoO₃) electrode materials and studied them via in situ X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD) techniques. The α-MoO₃ electrode material possesses a specific capacitance of 575.4 F g^-1 and a gravimetric capacity of 207.8 mA h g^-1 at a current density of 1 A g^-1. From the in situ XRD results, the crystal structures of α-MoO₃ and β-MoO₃ show a significant distortion, whereas that of h-MoO₃ is minorly affected during the insertion or extraction of Al³⁺ ions. Based on the in situ XAS results, the MoO₆ octahedral structure and Mo ion valence of α-MoO₃ and β-MoO₃ also exhibit a strong variation, whereas those of h-MoO₃ are nearly unchanged during the insertion or extraction of Al³⁺ ions. Notably, in situ XRD and XAS also clearly show a possible phase of Al_xMoO₃ during the Al³⁺ insertion and extraction cycles in the α-MoO₃ and β-MoO₃ electrode materials, which may play a crucial role in the behavior of the residue of Al³⁺ ions and poor cycling stability. We provide clear evidence that the Al-ion energy storage performance of various MoO₃ electrode materials is strongly associated with the corresponding tunnel space and the stability of their crystal structures. This work also provides new insight into a strong correlation between ion-storage efficiency and the corresponding crystal structure, which is greatly helpful for the development and improvement of new electrode materials for Al-ion energy storage.

Recent Advances in Wearable Potentiometric pH Sensors

Wearable sensors reflect the real-time physiological information and health status of individuals by continuously monitoring biochemical markers in biological fluids, including sweat, tears and saliva, and are a key technology to realize portable personalized medicine. Flexible electrochemical pH sensors can play a significant role in health since the pH level affects most biochemical reactions in the human body. pH indicators can be used for the diagnosis and treatment of diseases as well as the monitoring of biological processes. The performances and applications of wearable pH sensors depend significantly on the properties of the pH-sensitive materials used. At present, existing pH-sensitive materials are mainly based on polyaniline (PANI), hydrogen ionophores (HIs) and metal oxides (MOx). In this review, we will discuss the recent progress in wearable pH sensors based on these sensitive materials. Finally, a viewpoint for state-of-the-art wearable pH sensors and a discussion of their existing challenges are presented.

The Dopamine Assisted Synthesis of MoO3/Carbon Electrodes With Enhanced Capacitance in Aqueous Electrolyte

A capacitance increase phenomenon is observed for MoO₃ electrodes synthesized via a sol-gel process in the presence of dopamine hydrochloride (Dopa HCl) as compared to α-MoO₃ electrodes in 5M ZnCl₂ aqueous electrolyte. The synthesis approach is based on a hydrogen peroxide-initiated sol-gel reaction to which the Dopa HCl is added. The powder precursor (Dopa)_xMoO_y, is isolated from the metastable gel using freeze-drying. Hydrothermal treatment (HT) of the precursor results in the formation of MoO₃ accompanied by carbonization of the organic molecules; designated as HT-MoO₃/C. HT of the precipitate formed in the absence of dopamine in the reaction produced α-MoO₃, which was used as a reference material in this study (α-MoO₃-ref). Scanning electron microscopy (SEM) images show a nanobelt morphology for both HT-MoO₃/C and α-MoO₃-ref powders, but with distinct differences in the shape of the nanobelts. The presence of carbonaceous content in the structure of HT-MoO₃/C is confirmed by FTIR and Raman spectroscopy measurements. X-ray diffraction (XRD) and Rietveld refinement analysis demonstrate the presence of α-MoO₃ and h-MoO₃ phases in the structure of HT-MoO₃/C. The increased specific capacitance delivered by the HT-MoO₃/C electrode as compared to the α-MoO₃-ref electrode in 5M ZnCl₂ electrolyte in a −0.25–0.70 V vs. Ag/AgCl potential window triggered a more detailed study in an expanded potential window. In the 5M ZnCl₂ electrolyte at a scan rate of 2 mV s⁻¹, the HT-MoO₃/C electrode shows a second cycle capacitance of 347.6 F g⁻¹. The higher electrochemical performance of the HT-MoO₃/C electrode can be attributed to the presence of carbon in its structure, which can facilitate electron transport. Our study provides a new route for further development of metal oxides for energy storage applications.

Lithography-free tunable absorber at visible region via one-dimensional photonic crystals consisting of an α-MoO3 layer

Flexible control of light absorption within the lithography-free nanostructure is crucial for many polarization-dependent optical devices. Herein, we demonstrated that the lithography-free tunable absorber (LTA) can be realized by using two one-dimensional (1D) photonic crystals (PCs) consisting of an α-MoO₃ layer at visible region. The two 1D PCs have different bulk band properties, and the topological interface state-induced light absorption enhancement of α-MoO₃ can be realized as the α-MoO₃ thin film is inserted at the interface between the two 1D PCs. The resonant cavity model is proposed to evaluate the anisotropic absorption performances of the LTA, and the results are in good agreement with those of the transfer matrix method (TMM). The absorption efficiency of the LTA can be tailored by the number of the period of the two PCs, and the larger peak absorption is the direct consequence of the larger field enhancement factor (FEF) within the α-MoO₃ layer. In addition, near-perfect absorption can be achieved as the LTA is operated at the over-coupled resonance. By varying the polarization angle, the absorption channels can be selected and the reflection response can be effectively modulated due to the excellent in-plane anisotropy of α-MoO₃.

A novel approach for designing efficient broadband photodetectors expanding from deep ultraviolet to near infrared

Broadband photodetection (PD) covering the deep ultraviolet to near-infrared (200-1000 nm) range is significant and desirable for various optoelectronic designs. Herein, we employ ultraviolet (UV) luminescent concentrators (LC), iodine-based perovskite quantum dots (PQDs), and organic bulk heterojunction (BHJ) as the UV, visible, and near-infrared (NIR) photosensitive layers, respectively, to construct a broadband heterojunction PD. Firstly, experimental and theoretical results reveal that optoelectronic properties and stability of CsPbI₃ PQDs are significantly improved through Er³⁺ doping, owing to the reduced defect density, improved charge mobility, increased formation energy, tolerance factor, etc. The narrow bandgap of CsPbI₃:Er³⁺ PQDs serves as a visible photosensitive layer of PD. Secondly, considering the matchable energy bandgap, the BHJ (BTP-4Cl: PBDB-TF) is selected as to NIR absorption layer to fabricate the hybrid structure with CsPbI₃:Er³⁺ PQDs. Thirdly, UV LC converts the UV light (200-400 nm) to visible light (400-700 nm), which is further absorbed by CsPbI₃:Er³⁺ PQDs. In contrast with other perovskites PDs and commercial Si PDs, our PD presents a relatively wide response range and high detectivity especially in UV and NIR regions (two orders of magnitude increase that of commercial Si PDs). Furthermore, the PD also demonstrates significantly enhanced air- and UV- stability, and the photocurrent of the device maintains 81.5% of the original one after 5000 cycles. This work highlights a new attempt for designing broadband PDs, which has application potential in optoelectronic devices.

Tungsten and molybdenum oxide nanostructures: two-dimensional layers and nanoclusters

W- and Mo-oxides form an interesting class of materials, featuring structural complexities, stoichiometric flexibility, and versatile physical and chemical properties that render them attractive for many applications in diverse fields of nanotechnologies. In nanostructured form, novel properties and functionalities emerge as a result of quantum size and confinement effects. In this topical review, W- and Mo-oxide nanosystems are examined with particular emphasis on two-dimensional (2D) layers and small molecular-type clusters. We focus on the epitaxial growth of 2D layers on metal single crystal surfaces and investigate their novel geometries and structures by a surface science approach. The coupling between the oxide overlayer and the metal substrate surface is a decisive element in the formation of the oxide structures and interfacial strain and charge transfer are shown to determine the lowest energy structures. Atomic structure models as determined by density functional theory (DFT) simulations are reported and discussed for various interface situations, with strong and weak coupling. Free-standing (quasi-)2D oxide layers, so-called oxide nanosheets, are attracting a growing interest recently in the applied research community because of their easy synthesis via wet-chemical routes. Although they consist typically of several atomic layers thick-not always homogeneous-platelet systems, their quasi-2D character induces a number of features that make them attractive for optoelectronic, sensor or biotechnological device applications. A brief account of recently published preparation procedures of W- and Mo-oxide nanosheets and some prototypical examples of proof of concept applications are reported here. (MO₃)₃(M = W, Mo) clusters can be generated in the gas phase in nearly monodisperse form by a simple vacuum sublimation technique. These clusters, interesting molecular-type structures by their own account, can be deposited on a solid surface in a controlled way and be condensed into 2D W- and Mo-oxide layers; solid-state chemical reactions with pre-deposited surface oxide layers to form 2D ternary oxide compounds (tungstates, molybdates) have also been reported. The clusters have been proposed as model systems for molecular studies of reactive centres in catalytic reactions. Studies of the catalysis of (MO₃)₃clusters in unsupported and supported forms, using the conversion of alcohols as model reactions, are discussed. Finally, we close with a brief outlook of future perspectives.

Molybdenum Oxide Nanoparticle Aggregates Grown by Chemical Vapor Transport

In this study, the advanced chemical vapor transport (CVT) method in combination with the quenching effect is introduced for creating molybdenum oxide nanoparticle arrays, composed of the hierarchical structure of fine nanoparticles (NPs), which are vertically grown with a homogeneous coverage on the individual carbon fibers of carbon fiber paper (CFP) substrates. The obtained molybdenum oxide NPs hold a metastable high-temperature γ-Mo₄O₁₁ phase along with a stable α-MoO₃ phase by the quenching effect. Furthermore, such a quenching effect forms thinner and smaller nanoparticle aggregates by suppressing the growth and coalescence of primary particles. The molybdenum oxide nanoparticle aggregates are prepared using two different types of precursors: MoO₃ and a 1:1 (mol/mol) mixture of MoO₃ and activated carbon. The results characterized using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and Fourier-transform infrared spectroscopy show that the relative amount of α-MoO₃ to γ-Mo₄O₁₁ within the prepared NPs is dependent on the precursor type; a lower amount of α-MoO₃ to γ-Mo₄O₁₁ is obtained in the NPs prepared using the mixed precursor of MoO₃ and carbon. This processing–structure landscape study can serve as the groundwork for the development of high-performance nanomaterials in various electronic and catalytic applications.

Folic acid functionalized molybdenum oxide quantum dots for the detection of Cu2+ ion and alkaline phosphatase via fluorescence turn off-on mechanism

The assay of alkaline phosphatase (ALP) plays a key role in the diagnosis of various diseases. Herein, folic acid functionalized molybdenum oxide quantum dots (FA-MoO_x QDs) are explored as fluorescence "turn- off and on" probes for assaying of Cu²⁺ ion and ALP, respectively. This fluorescence sensing strategy was based on the quenching of emission peak of FA-MoO_x QDs at 445 nm by Cu²⁺ ion, followed by restoring of emission peak selectively with ALP. Based on the quenching and restoring of FA-MoO_x QDs emission intensity, quantitative assay was developed for the detection of Cu²⁺ ion (0.20 - 500 µM) and ALP (0.06 - 150 U/L) with detection limits of 29 nM and 0.026 U/L, respectively. The developed FA-MoO_x QDs-based fluorescence "turn- off and on" strategy exhibited satisfactory results for assaying of ALP in biofluids.

Fabrication of graphitic carbon Nitride/Nonstoichiometric molybdenum oxide nanorod composite with the nonmetal plasma enhanced photocatalytic hydrogen evolution activity

The extended light absorption and the prevented charge recombination are crucial for the graphitic carbon nitride (g-C₃N₄) based photocatalytic materials. Herein, nonstoichiometric molybdenum oxide (MoO_3-x) nanorods with oxygen vacancies were synthesized by a hydrothermal method with trace amount of oleylamine, and the Z-scheme two-dimentional (2D)/one-dimentional (1D) g-C₃N₄/MoO_3-x composites were prepared by a facile electrostatic assembling approach. The blue MoO_3-x nanorods with oxygen vacancies are loaded uniformly on the g-C₃N₄ nanosheets. The g-C₃N₄/MoO_3-x composite materials exhibit strong absorption in the visible and near-infrared light regions, and the improved charge separation efficiency through the Z-scheme charge transfer mechanism. The g-C₃N₄/MoO_3-x composite presents a significantly improved photocatalytic hydrogen generation activity with good cycling stability compared with sonicated g-C₃N₄ nanosheets. The best hydrogen generation activity of 209.2 μmol·h^-1 under solar light irradiation and the highest apparent quantum efficiency of 4.4% irradiated at 365 nm are obtained by the g-C₃N₄/MoO_3-x composite with a mass percent of 27.5%, which is 2.63 times of g-C₃N₄. The weight ratios and the content of oxygen vacancies in the small-size MoO_3-x nanorods have a significant influence on the photocatalytic hydrogen performance. Moreover, effective photocatalytic overall water splitting can be achieved with the H₂ and O₂ evolution rates of 0.755 and 0.368 μmol∙h^-1 by the g-C₃N₄/MoO_3-x composite. The novel g-C₃N₄/MoO_3-x composite will have broad prospects in the field of photocatalytic applications.

Synthesis and characterization of MoxFe1−xO nanocomposites for the ultra-fast degradation of methylene blue via a Fenton-like process: a green approach

A detailed degradation study of methylene blue within 22 minutes by the green synthesis of MoxFe1−xO nanocomposites using Punica granatum peel extract.

Enhanced Jahn-Teller distortion boosts molybdenum trioxide's superior lithium ion storage capability

Upgrading the energy density and cycling life of current lithium ion batteries is urgently needed for developing advanced portable electronics and electric vehicles. Amorphous transition metal oxides (TMO) with inherent lattice disorders exhibit enormous potential as electrode materials owing to their high specific capacity, fast ion diffusion, and excellent cyclic stability. Yet, challenges remain in their controllable synthesis. In this study, the amorphous phase is induced into α-MoO₃ crystal nanobelts at room temperature with the aid of Jahn-Teller effect via enhanced lattice distortion triggered by the accumulation of low-valent molybdenum centers. The optimized HI-MoO₃-36 h exhibits high reversible capacities of 886.0 at 0.1 A g^-1 and 491.1 mA h g^-1 at 1.0 A g^-1, respectively, along with outstanding stability retaining 83.4% initial capacity after 100 cycles at 0.1 A g^-1. The crystal engineering strategy proposed in this work is believed to be a salutary reference towards the synthesis of high-performance TMO anodes for energy storage applications.

Liquid-Metal-Assisted Deposition and Patterning of Molybdenum Dioxide at Low Temperature

Molybdenum dioxide (MoO2), considering its near-metallic conductivity and surface plasmonic properties, is a great material for electronics, energy storage devices and biosensing. Yet to this day, room-temperature synthesis of large area MoO2, which allows deposition on arbitrary substrates, has remained a challenge. Due to their reactive interfaces and specific solubility conditions, gallium-based liquid metal alloys offer unique opportunities for synthesizing materials that can meet these challenges. Herein, a substrate-independent liquid metal-based method for the room temperature deposition and patterning of MoO2 is presented. By introducing a molybdate precursor to the surrounding of a eutectic gallium-indium alloy droplet, a uniform layer of hydrated molybdenum oxide (H2MoO3) is formed at the interface. This layer is then exfoliated and transferred onto a desired substrate. Utilizing the transferred H2MoO3 layer, a laser-writing technique is developed which selectively transforms this H2MoO3 into crystalline MoO2 and produces electrically conductive MoO2 patterns at room temperature. The electrical conductivity and plasmonic properties of the MoO2 are analyzed and demonstrated. The presented metal oxide room-temperature deposition and patterning method can find many applications in optoelectronics, sensing, and energy industries.

Local Interactions of Atmospheric Oxygen with MoS2 Crystals

Thin and single MoS2 flakes are envisioned to contribute to the flexible nanoelectronics, particularly in sensing, optoelectronics and energy harvesting. Thus, it is important to study their stability and local surface reactivity. Their most straightforward surface reactions in this context pertain to thermally induced interactions with atmospheric oxygen. This review focuses on local and thermally induced interactions of MoS2 crystals and single MoS2 flakes. First, experimentally observed data for oxygen-mediated thermally induced morphological and chemical changes of the MoS2 crystals and single MoS2 flakes are presented. Second, state-of-the-art mechanistic insight from computer simulations and arising open questions are discussed. Finally, the properties and fate of the Mo oxides arising from thermal oxidation are reviewed, and future directions into the research of the local MoS2/MoOx interface are provided.

Advanced Strategies to Improve Performances of Molybdenum-Based Gas Sensors

Molybdenum-based materials have been intensively investigated for high-performance gas sensor applications. Particularly, molybdenum oxides and dichalcogenides nanostructures have been widely examined due to their tunable structural and physicochemical properties that meet sensor requirements. These materials have good durability, are naturally abundant, low cost, and have facile preparation, allowing scalable fabrication to fulfill the growing demand of susceptible sensor devices. Significant advances have been made in recent decades to design and fabricate various molybdenum oxides- and dichalcogenides-based sensing materials, though it is still challenging to achieve high performances. Therefore, many experimental and theoretical investigations have been devoted to exploring suitable approaches which can significantly enhance their gas sensing properties. This review comprehensively examines recent advanced strategies to improve the nanostructured molybdenum-based material performance for detecting harmful pollutants, dangerous gases, or even exhaled breath monitoring. The summary and future challenges to advance their gas sensing performances will also be presented.

A Multifunctional Bioactive Glass-Ceramic Nanodrug for Post-Surgical Infection/Cancer Therapy-Tissue Regeneration

The production of reactive oxygen species, persistent inflammation, bacterial infection, and recurrence after a tumor resection has become the main challenge in cancer therapy and post-surgical skin regeneration. Herein, we report a multifunctional branched bioactive Si-Ca-P-Mo glass-ceramic nanoparticle (BBGN) with inlaid molybdate nanocrystals for an effective post-surgical melanoma therapy or infection therapy and defected skin reconstruction. Mixed-valence molybdenum (Mo⁴⁺ and Mo⁶⁺) doped BBGN (BBGN-Mo) was first synthesized via a hydrothermally assisted classical synthesis of BGN, which enables the structure with a lot of free electrons and oxygen vacancies. The BBGN-Mo exhibits excellent photothermal, antibacterial, enzyme-like radical scavenging, and anti-inflammatory as well as promoted vascularized efficiencies. BBGN-Mo could kill drug-resistant methicillin-resistant Staphylococcus aureus (MRSA) bacteria in vitro (99.5%) and in vivo (97.0%) at a low photothermal temperature (42 °C) and efficiently enhance the MRSA-infected wound repair. Additionally, BBGN-Mo could effectively inhibit tumor recurrence (96.4%), continuously improve the wound anti-inflammation and vascularization microenvironment, and significantly promote the post-surgical skin regeneration. This work suggests that conventional bioceramics could be turned to the highly efficient nanodrug for treating the challenge of post-surgical cancer therapy or infection therapy and tissue regeneration, through the mixed-valence strategy.

First-principles prediction of infrared phonon and dielectric function in biaxial hyperbolic van der Waals crystal α-MoO3

Layered biaxial hyperbolic molybdenum trioxide (α-MoO₃) with weak van der Waals (vdW) interlayer bonding recently received extensive attention due to its anisotropic dielectric response to infrared (IR) radiation, which couples to the lattice vibrations and allows for manipulating the radiative energy transport. However, the understanding of IR-active phonon modes and dielectric function of it has not yet been fully achieved. Here, by utilizing mode-level first-principles analysis based on density functional theory (DFT), the phonon modes contributing to the IR dielectric response of α-MoO₃ are fully determined. The anisotropic IR-active modes are identified from lattice vibration analysis, allowing for a clear evaluation of the IR absorption contribution from the weak or strong IR phonon modes. By further employing anharmonic-lattice dynamics calculations, the damping of the corresponding IR modes is directly obtained. This approach enables predictions of IR optical properties without any fitting or assumed parameters. Our predictions bridge the scientific gap of comprehensively understanding the unreported IR-active phonon modes of α-MoO₃ and overall agree well with available experimental data, placing our DFT-based method at a privileged stage for accurately predicting the IR optical properties of α-MoO₃. These comprehensive understandings of the IR phonons and dielectric properties of α-MoO₃ pave the way for nanophotonic devices with tunable functionalities and enable design of α-MoO₃ for advanced optical devices.

Advances in photothermal nanomaterials for biomedical, environmental and energy applications

Materials that exhibit photothermal effect have attracted enormous research interests due to their ability to strongly absorb light and effectively transform it into heat for a wide range of applications in biomedical, environmental and energy related fields. The past decade has witnessed significant advances in the preparation of a variety of photothermal materials, mainly due to the emergence of many nano-enabled new materials, such as plasmonic metals, stoichiometric/non-stoichiometric semiconductors, and the newly emerging MXenes. These photothermal nanomaterials can be hybridized with other constituents to form functional hybrids or composites for achieving enhanced photothermal performance. In this review, we present the fundamental insight of inorganic photothermal materials, including their photothermal conversion mechanisms/properties as well as their potential applications in various fields. Emphasis is placed on strategic approaches for improving their light harvesting and photothermal conversion capabilities through engineering their nanostructured size, shape, composition, bandgap and so on. Lastly, the underlying challenges and perspectives for future development of photothermal nanomaterials are proposed.

Combination of Metal Oxide and Polytriarylamine: A Design Principle to Improve the Stability of Perovskite Solar Cells

In the last decade, perovskite photovoltaics gained popularity as a potential rival for crystalline silicon solar cells, which provide comparable efficiency for lower fabrication costs. However, insufficient stability is still a bottleneck for technology commercialization. One of the key aspects for improving the stability of perovskite solar cells (PSCs) is encapsulating the photoactive material with the hole-transport layer (HTL) with low gas permeability. Recently, it was shown that the double HTL comprising organic and inorganic parts can perform the protective function. Herein, a systematic investigation and comparison of four double HTLs incorporating polytriarylamine and thermally evaporated transition metal oxides in the highest oxidation state are presented. In particular, it was shown that MoOx, WOx, and VOx-based double HTLs provided stable performance of PSCs for 1250 h, while devices with NbOx lost 30% of their initial efficiency after 1000 h. Additionally, the encapsulating properties of all four double HTLs were studied in trilayer stacks with HTL covering perovskite, and insignificant changes in the absorber composition were registered after 1000 h under illumination. Finally, it was demonstrated using ToF-SIMS that the double HTL prevented the migration of perovskite volatile components within the structure. Our findings pave the way towards improved PSC design that ensures their long-term operational stability.

Molybdenum oxide based sensors

In this review article were considered the works of electrochemical sensors modified with molybdenum oxide. The work of sensors based on molybdenum oxide was systematized, a comparison table was developed, the sensors were classified according to the purpose of use. Methods of molybdenum oxide synthesis used to modify the working electrode in electrochemical sensors were considered. The various methods have been used to synthesize molybdenum oxide, such as a thermal, hydrothermal, electrochemical, electric spark, pulsed laser method, acid condensation, electrophoretic precipitation, pulse potential precipitation. The main parameters of the molybdenum oxide modified sensors, such as the detection limit, linear range, response time, sensitivity, and other parameters were compared. As a result of studies, it was found that molybdenum oxide is selected as a modifying material in electrochemical sensors due to the unique physicochemical properties of molybdenum oxide, in particular because of mechanical strength, electrical conductivity, electro catalytic activity, crystallinity. The features of electrochemical biosensors coated with molybdenum oxide were described for the detection of important compounds in specific samples. Sensors based on molybdenum oxide have been used for detection of glucose, dopamine, ethanol, ascorbic acid, troponin-1, norepinephrine, procalcitonin, L-lactate, bromate, chlorate, E110, tartrazine, hydrochlorothiazide, human epidermal growth factor-2, lithium,sodium,potassium. This paper provides general summarized information about current aspects of research works related to electrochemical sensors based on molybdenum oxide.

Defect Engineering Enables Synergistic Action of Enzyme-Mimicking Active Centers for High-Efficiency Tumor Therapy

Perusing redox nanozymes capable of disrupting cellular homeostasis offers new opportunities to develop cancer-specific therapy, but remains challenging, because most artificial enzymes lack enzyme-like scale and configuration. Herein, for the first time, we leverage a defect engineering strategy to develop a simple yet efficient redox nanozyme by constructing enzyme-mimicking active centers and investigated its formation and catalysis mechanism thoroughly. Specifically, the partial Fe doping in MoO_x (donated as Fe-MoO_v) was demonstrated to activate structure reconstruction with abundant defect site generation, including Fe substitution and oxygen vacancy (OV) defects, which significantly enable the binding capacity and catalytic activity of Fe-MoO_v nanozymes in a synergetic fashion. More intriguingly, plenty of delocalized electrons appear due to Fe-facilitated band structure reconstruction, directly contributing to the remarkable surface plasmon resonance effect in the near-infrared (NIR) region. Under NIR-II laser irradiation, the designed Fe-MoO_v nanozymes are able to induce substantial disruption of redox and metabolism homeostasis in the tumor region via enzyme-mimicking cascade reactions, thus significantly augmenting therapeutic effects. This study that takes advantage of defect engineering offers new insights into developing high-efficiency redox nanozymes.

Gas sensing materials roadmap

Gas sensor technology is widely utilized in various areas ranging from home security, environment and air pollution, to industrial production. It also hold great promise in non-invasive exhaled breath detection and an essential device in future internet of things. The past decade has witnessed giant advance in both fundamental research and industrial development of gas sensors, yet current efforts are being explored to achieve better selectivity, higher sensitivity and lower power consumption. The sensing layer in gas sensors have attracted dominant attention in the past research. In addition to the conventional metal oxide semiconductors, emerging nanocomposites and graphene-like two-dimensional materials also have drawn considerable research interest. This inspires us to organize this comprehensive 2020 gas sensing materials roadmap to discuss the current status, state-of-the-art progress, and present and future challenges in various materials that is potentially useful for gas sensors.

Nanomaterials and their composite scaffolds for photothermal therapy and tissue engineering applications

Photothermal therapy (PTT) has attracted broad attention as a promising method for cancer therapy with less severe side effects than conventional radiation therapy, chemotherapy and surgical resection. PTT relies on the photoconversion capacity of photothermal agents (PTAs), and a wide variety of nanomaterials have been employed as PTAs for cancer therapy due to their excellent photothermal properties. The PTAs are systematically or locally administered and become enriched in cancer cells to increase ablation efficiency. In recent years, PTAs and three-dimensional scaffolds have been hybridized to realize the local delivery of PTAs for the repeated ablation of cancer cells. Meanwhile, the composite scaffolds can stimulate the reconstruction and regeneration of the functional tissues and organs after ablation of cancer cells. A variety of composite scaffolds of photothermal nanomaterials have been prepared to combine the advantages of different modalities to maximize their therapeutic efficacy with minimal side effects. The synergistic effects make the composite scaffolds attractive for biomedical applications. This review summarizes these latest advances and discusses the future prospects.

Degradation Behavior, Biocompatibility, Electrochemical Performance, and Circularity Potential of Transient Batteries

Transient technology seeks the development of materials, devices, or systems that undergo controlled degradation processes after a stable operation period, leaving behind harmless residues. To enable externally powered fully transient devices operating for longer periods compared to passive devices, transient batteries are needed. Albeit transient batteries are initially intended for biomedical applications, they represent an effective solution to circumvent the current contaminant leakage into the environment. Transient technology enables a more efficient recycling as it enhances material retrieval rates, limiting both human and environmental exposures to the hazardous pollutants present in conventional batteries. Little efforts are focused to catalog and understand the degradation characteristics of transient batteries. As the energy field is a property-driven science, not only electrochemical performance but also their degradation behavior plays a pivotal role in defining the specific end-use applications. The state-of-the-art transient batteries are critically reviewed with special emphasis on the degradation mechanisms, transiency time, and biocompatibility of the released degradation products. The potential of transient batteries to change the current paradigm that considers batteries as harmful waste is highlighted. Overall, transient batteries are ready for takeoff and hold a promising future to be a frontrunner in the uptake of circular economy concepts.

Ultralow Thermal Conductivity in Two-Dimensional MoO3

Monolayer molybdenum trioxide (MoO₃) is an emerging two-dimensional (2D) material with high electrical conductivity but unexplored thermal conductivity. Using first-principles calculations and a Boltzmann transport theoretical framework, we predict a record low room-temperature phonon thermal conductivity (κ_p) of 1.57 and 1.26 W/mK along the principal in-plane directions of the MoO₃ monolayer. The behavior is attributed to the combination of soft flexural and in-plane acoustic modes, which are coupled through the finite layer thickness, and to the strong bonding anharmonicity, which gives rise to significant 3- and 4-phonon scattering. These insights suggest new indicators for guiding the search of 2D materials with low κ_p and motivates κ_p measurements in MoO₃ and its applications as a thermoelectric and thermally protective material.

Nanostructured Molybdenum Oxides from Aluminium-Based Intermetallic Compound: Synthesis and Application in Hydrogen Evolution Reaction

Characterized by a large surface area to volume ratio, nanostructured metal oxides possess unique chemical and physical properties with applications in electronics, catalysis, sensors, etc. In this study, Mo₃Al₈, an intermetallic compound, has been used as a precursor to obtain nanostructured molybdenum oxides. It was prepared into ribbons by arc-melting and melt-spinning techniques. Single and double-step free corrosion of the as-quenched material have been studied in 1 M KOH, 1 M HF and 1.25 M FeCl₃ at room temperature. In both cases, nanostructured molybdenum oxides were obtained on a surface layer a few microns thick. Two of the as-prepared samples were tested for their electrocatalytic capability for hydrogen evolution reaction (HER) in 0.5 M H₂SO₄ giving low onset potential (−50 mV, −45 mV), small Tafel slopes (92 mV dec⁻¹, 9 mV dec⁻¹) and high exchange current densities (0.08 mA cm⁻², 0.35 mA cm⁻² respectively). The proposed nanostructured molybdenum oxides are cost-effective and sustainable due to the cheap and abundant starting material used and the simple synthetic route, paving the way for their possible application as HER electrocatalysts.

Self-Powered Rewritable Electrochromic Display based on WO3-x Film with Mechanochemically Synthesized MoO3-y Nanosheets

Electrochromic displays with bistable color states provide a promising means toward transparent human-machine interfaces. However, the need for external power and the weak optical modulation in the visible light region of most electrochromic devices hinder their practical applications in displays. Here we prepare the MoO_3-y/WO_3-x films based on MoO_3-y nanosheets, which show a dark blue color that matches the response of the eye and meets visual comfort standards compared to pure WO_3-x film. By introducing the highly transparent Al³⁺ ion hydrogel layer, a convenient electrochromic device driven by the internal chemical potential has been designed. The device based on the MoO_3-y /WO_3-x film exhibits a high optical modulation in the whole visible light range and can operate at self-powered mode with fast response speed and excellent cycle stability. Moreover, we develop an ionic writing board based on the MoO_3-y/WO_3-x film to surmount the fixed display information issue in conventional electrochromic displays. The ionic writing board exhibits excellent visual display quality and realizes arbitrary writing with a self-powered characteristic. This work provides a simple mechanochemical synthesis procedure of MoO_3-y nanosheets and an ingenious design of self-powered electrochromic devices, which will enable the development of next-generation high-performance electrochromic displays.

The Jahn-Teller Effect for Amorphization of Molybdenum Trioxide towards High-Performance Fiber Supercapacitor

Amorphous pseudocapacitive nanomaterials are highly desired in energy storage applications for their disordered crystal structures, fast electrochemical dynamics, and outstanding cyclic stability, yet hardly achievable using the state-of-the-art synthetic strategies. Herein, for the first time, high capacitive fiber electrodes embedded with nanosized amorphous molybdenum trioxide (A-MoO_3-x) featuring an average particle diameter of ~20 nm and rich oxygen vacancies are obtained via a top-down method using α-MoO₃ bulk belts as the precursors. The Jahn-Teller distortion in MoO₆ octahedra due to the doubly degenerate ground state of Mo⁵⁺, which can be continuously strengthened by oxygen vacancies, triggers the phase transformation of α-MoO₃ bulk belts (up to 30 μm long and 500 nm wide). The optimized fibrous electrode exhibits among the highest volumetric performance with a specific capacitance (C_V) of 921.5 F cm⁻³ under 0.3 A cm⁻³, endowing the fiber-based weaveable supercapacitor superior C_V and E_V (energy density) of 107.0 F cm⁻³ and 9.5 mWh cm⁻³, respectively, together with excellent cyclic stability, mechanical robustness, and rate capability. This work demonstrates a promising strategy for synthesizing nanosized amorphous materials in a scalable, cost-effective, and controllable manner.

A long-term stable aqueous aluminum battery electrode based on one-dimensional molybdenum-tantalum oxide nanotube arrays

Aluminum ion aqueous batteries (AIBs) are among the most promising candidates for high energy density devices due to the multivalent redox processes associated with Al³⁺ ion intercalation. However, only a few stable AIB electrode materials have been reported so far. MoO₃ is a very promising electrode material due to its octahedral layered crystal structure which can accommodate multivalent cation by intercalation. However, the poor electrochemical stability of MoO₃ and the sluggish intercalation kinetics of Al³⁺ ion in Mo oxides electrodes limit its practical application. In this work, we propose a strategy to overcome such shortcomings of MoO₃ by fabricating electrodes composed of self-ordered one-dimensional (1D) MoTaO_x nanotubes synthesized via electrochemical anodization of Mo-Ta alloy substrates. We show that this approach allows for direct incorporation of Ta in the Mo oxide nanotubes. The resulting MoTaO_x nanotubes, composed of octahedral MoO₃ and rhombohedral Mo₂Ta₂O₁₁ phases, exhibit remarkable electrochemical stability and Al-ion storage properties in aqueous electrolytes that are superior to that of pristine Mo oxide or other most efficient electrode materials reported to date. Such MoTaO_x nanotube-based electrodes can achieve a specific capacity of 1180 mA h cm^-3 (337 mA h g^-1, 141 μA h cm^-2) at 1.25 A cm^-3 (∼0.35 A g^-1, 0.15 mA cm^-2). More importantly, the capacity retention of such nanotube array electrodes remains above 83% of the initial capacity after 3000 cycles.

Synthesis and defect engineering of molybdenum oxides and their SERS applications

Surface-enhanced Raman scattering (SERS) spectroscopy has been developed into a cross-disciplinary analytical technology through exploring various materials' Raman vibrational modes with ultra-high sensitivity and specificity. Although conventional noble-metal based SERS substrates have achieved great success, oxide-semiconductor-based SERS substrates are attracting researchers' intensive interest due to their merits of facile fabrication, high uniformity and tunable SERS characteristics. Among all the SERS active oxide semiconductors, molybdenum oxides (MoO_x) possess exceptional advantages of high Raman enhancement factor, environmental stability, recyclable detection, etc. More interestingly, the SERS effect of the MoO_x SERS substrates may involve both the electromagnetic enhancement mechanism and the chemical enhancement mechanism, which is determined by the stoichiometry and morphology of the material. Therefore, the focus of this review will be on two critical points: (1) synthesis and material engineering methods of the functional MoO_x material and (2) MoO_x SERS mechanism and performance evaluation. First, we review recent works on the MoO_x preparation and material property tuning approaches. Second, the SERS mechanism and performance of various MoO_x substrates are surveyed. In particular, the performance uniformity, enhancement factor and recyclability are evaluated. In the end, we discuss several challenges and open questions related to further promoting the MoO_x as the SERS substrate for monitoring extremely low trace molecules and the theory for better understanding of the SERS enhancement mechanism.