Two-Dimensional Organic-Inorganic Hybrid Perovskites: A New Platform for Optoelectronic Applications

Interfacial Synthesis of a Monolayered Fluorescent Two-Dimensional Polymer through Dynamic Imine Chemistry

A fluorescent monolayered two-dimensional polymer (2DP) containing both tetraphenylethylene (TPE) and imine linkages is synthesized at air-water interface using the Langmuir-Blodgett method. We designed TPE-based monomers with long distances between the TPE and the imine linkages to avoid the charge transfer and therefore keep the fluorescence. A monolayered 2DP provided with more than 104 μm2 in domain size and around 0.8 nm thickness was obtained through a successive Schiff base reaction at air-water interface. The nanostructures and fluorescent property of 2DP films were characterized by optical microscopy, SEM, TEM, AFM and fluorescence spectrum. Most importantly, the tip-enhanced Raman spectroscopy (TERS) was utilized here to confirm the success of the polycondensation of monolayered 2DP.

Materials chemistry and engineering in metal halide perovskite lasers

The invention and development of the laser have revolutionized science, technology, and industry. Metal halide perovskites are an emerging class of semiconductors holding promising potential in further advancing the laser technology. In this Review, we provide a comprehensive overview of metal halide perovskite lasers from the viewpoint of materials chemistry and engineering. After an introduction to the materials chemistry and physics of metal halide perovskites, we present diverse optical cavities for perovskite lasers. We then comprehensively discuss various perovskite lasers with particular functionalities, including tunable lasers, multicolor lasers, continuous-wave lasers, single-mode lasers, subwavelength lasers, random lasers, polariton lasers, and laser arrays. Following this a description of the strategies for improving the stability and reducing the toxicity of metal halide perovskite lasers is provided. Finally, future research directions and challenges toward practical technology applications of perovskite lasers are provided to give an outlook on this emerging field.

Halide Perovskites for Nonlinear Optics

Halide perovskites provide an ideal platform for engineering highly promising semiconductor materials for a wide range of applications in optoelectronic devices, such as photovoltaics, light-emitting diodes, photodetectors, and lasers. More recently, increasing research efforts have been directed toward the nonlinear optical properties of halide perovskites because of their unique chemical and electronic properties, which are of crucial importance for advancing their applications in next-generation photonic devices. Here, the current state of the art in the field of nonlinear optics (NLO) in halide perovskite materials is reviewed. Halide perovskites are categorized into hybrid organic/inorganic and pure inorganic ones, and their second-, third-, and higher-order NLO properties are summarized. The performance of halide perovskite materials in NLO devices such as upconversion lasers and ultrafast laser modulators is analyzed. Several potential perspectives and research directions of these promising materials for nonlinear optics are presented.

Ruddlesden-Popper Perovskites: Synthesis and Optical Properties for Optoelectronic Applications

Ruddlesden-Popper perovskites with a formula of (A')2(A) n -1B n X3 n +1 have recently gained widespread interest as candidates for the next generation of optoelectronic devices. The variations of organic cation, metal halide, and the number of layers in the structure lead to the change of crystal structures and properties for different optoelectronic applications. Herein, the different synthetic methods for 2D perovskite crystals and thin films are summarized and compared. The optoelectronic properties and the charge transfer process in the devices are also delved, in particular, for light-emitting diodes and solar cells.

High-Quality Ruddlesden-Popper Perovskite Films Based on In Situ Formed Organic Spacer Cations

Ruddlesden-Popper perovskites (RPPs), consisting of alternating organic spacer layers and inorganic layers, have emerged as a promising alternative to 3D perovskites for both photovoltaic and light-emitting applications. The organic spacer layers provide a wide range of new possibilities to tune the properties and even provide new functionalities for RPPs. However, the preparation of state-of-the-art RPPs requires organic ammonium halides as the starting materials, which need to be ex situ synthesized. A novel approach to prepare high-quality RPP films through in situ formation of organic spacer cations from amines is presented. Compared with control devices fabricated from organic ammonium halides, this new approach results in similar (and even better) device performance for both solar cells and light-emitting diodes. High-quality RPP films are fabricated based on different types of amines, demonstrating the universality of the approach. This approach not only represents a new pathway to fabricate efficient devices based on RPPs, but also provides an effective method to screen new organic spacers with further improved performance.

Benefiting from Spontaneously Generated 2D/3D Bulk-Heterojunctions in Ruddlesden-Popper Perovskite by Incorporation of S-Bearing Spacer Cation

2D Ruddlesden-Popper (RP) perovskite solar cells have manifested superior operation durability yet inferior charge transport compared to their 3D counterparts. Integrating 3D phases with 2D RP perovskites presents a compromise to maintain respective advantages of both components. Here, the spontaneous generation of 3D phases embedded in 2D perovskite matrix is demonstrated at room temperature via introducing S-bearing thiophene-2-ethylamine (TEA) as both spacer and stabilizer of inorganic lattices. The resulting 2D/3D bulk heterojunction structures are believed to arise from the compression-induced epitaxial growth of the 3D phase at the grain boundaries of the 2D phase through the Pb-S interaction. The as-prepared 2D TEA perovskites exhibit longer exciton diffusion length and extended charge carrier lifetime than the paradigm 2D phenylethylamine (PEA)-based analogues and hence demonstrate an outstanding power conversion efficiency of 7.20% with significantly increased photocurrent. Dual treatments by NH4Cl and dimethyl sulfoxide are further applied to ameliorate the crystallinity and crystal orientation of 2D perovskites. Consequently, TEA-based devices exhibit a stabilized efficiency over 11% with negligible hysteresis and display excellent ambient stability without encapsulation by preserving 80% efficiency after 270 h storage in air with 60 ± 5% relative humidity at 25 °C.

The First 2D Homochiral Lead Iodide Perovskite Ferroelectrics: [R- and S-1-(4-Chlorophenyl)ethylammonium]2 PbI4

2D organic-inorganic lead iodide perovskites have recently received tremendous attention as promising light absorbers for solar cells, due to their excellent optoelectronic properties, structural tunability, and environmental stability. However, although great efforts have been made, no 2D lead iodide perovskites have been discovered as ferroelectrics, in which the ferroelectricity may improve the photovoltaic performance. Here, by incorporating homochiral cations, 2D lead iodide perovskite ferroelectrics [R-1-(4-chlorophenyl)ethylammonium]₂ PbI₄ and [S-1-(4-chlorophenyl)ethylammonium]₂ PbI₄ are successfully obtained. The vibrational circular dichroism spectra and crystal structural analysis reveal their homochirality. They both crystalize in a polar space group P1 at room temperature, and undergo a 422F1 type ferroelectric phase transition with transition temperature as high as 483 and 473.2 K, respectively, showing a multiaxial ferroelectric nature. They also possess semiconductor characteristics with a direct bandgap of 2.34 eV. Nevertheless, their racemic analogue adopts a centrosymmetric space group P2₁ /c at room temperature, exhibiting no high-temperature phase transition. The homochirality in 2D lead iodide perovskites facilitates crystallization in polar space groups. This finding indicates an effective way to design high-performance 2D lead iodide perovskite ferroelectrics with great application prospects.

Synthetic control over orientational degeneracy of spacer cations enhances solar cell efficiency in two-dimensional perovskites

Two-dimensional perovskites have emerged as more intrinsically stable materials for solar cells. Chemical tuning of spacer organic cations has attracted great interest due to their additional functionalities. However, how the chemical nature of the organic cations affects the properties of two-dimensional perovskites and devices is rarely reported. Here we demonstrate that the selection of spacer cations (i.e., selective fluorination of phenethylammonium) affects the film properties of two-dimensional perovskites, leading to different device performance of two-dimensional perovskite solar cells (average n = 4). Structural analysis reveals that different packing arrangements and orientational disorder of the spacer cations result in orientational degeneracy and different formation energies, largely explaining the difference in film properties. This work provides key missing information on how spacer cations exert influence on desirable electronic properties and device performance of two-dimensional perovskites via the weak and cooperative interactions of these cations in the crystal lattice.

Optical Properties of Two-Dimensional Perovskite Films of (C6H5C2H4NH3)2[PbI4] and (C6H5C2H4NH3)2 (CH3NH3)2[Pb3I10]

The temperature dependence of absorption and photoluminescence (PL) spectroscopies were used to study the optical properties of 2D perovskite films, including n = 1 and 3 of (PEA)₂(CH₃NH₃) _n-1[Pb _nI_{3 n+1}] (PEA = C₆H₅(CH₂)₂NH₃). In (PEA)₂[Pb₁I₄] (PEPI), excitons coupling to optical phonons with an average energy of ∼30 meV dominate the photophysics of absorption and PL. (PEA)₂(CH₃NH₃)₂[Pb₃I₁₀] (shortened as PMPI₃), nominally prepared as n = 3, actually was a mixture of multiple layered perovskites with various n. In absorption, a PMPI₃ film presents respective n materials' excitonic features, coupling to phonons with an average energy of ∼30 meV; in analyzing PL peaked singly at ∼1.6 eV and its width as a function of temperature, we found that PMPI₃ behaves like PEPI at around 80 K but like 3D perovskite near room temperature, with three times larger electron-phonon interaction strength compared to that in PEPI.