Supramolecular Antibacterial Materials for Combatting Antibiotic Resistance

Preparation of an amphiphilic peptide (P13) with proton sponge effect and analysis of its antitumor activity

In order to prevent drugs from being captured and degraded by the acidic environment of organelles, such as lysosomes, after entering cells, this study designed and synthesized a novel carrier amphiphilic polypeptide (DGRHHHLLLAAAA), designated P13, for use as a tumor-targeting drug delivery vehicle. The P13 peptide was synthesized by the solid phase synthesis method, and its self-assembly behavior and drug-loading capacity in aqueous solution were studied and characterizedin vitro. Doxorubicin (DOX) was loaded by dialysis method, and P13 and DOX were mixed at a mass ratio of 6:1 to form regular rounded globules. The acid-base buffering capacity of P13 was investigated determined by acid-base titration. The results revealed that P13 had excellent acid-base buffering capacity, a critical micelle concentration value of about 0.000 21 g l^-1, and the particle size of P13-Dox nanospheres was 167 nm. The drug encapsulation efficiency and drug loading capacity of micelles were 20.40 ± 1.21% and 21.25 ± 2.79%, respectively. At the concentration of 50μg ml^-1of P13-DOX , the inhibition rate was 73.35%. The results of thein vivoantitumor activity assay in mice showed that P13-DOX also exhibited excellent inhibitory effect on tumor growth, compared with the tumor weight of 1.1 g in the control group, the tumor weight in the P13-DOX-treated group was only 0.26 g. Additionally, the results of hematoxylin and eosin staining of the organs showed that P13-DOX had no damaging effect on normal tissues. The novel amphiphilic peptide P13 with proton sponge effect designed and prepared in this study is expected to be a promising tumor-targeting drug carrier with excellent application potential.

Toward Pathogenic Biofilm Suppressors: Synthesis of Amino Derivatives of Pillar[5]arene and Supramolecular Assembly with DNA

New amino derivatives of pillar[5]arene were obtained in three stages with good yields. It was shown that pillar[5]arene containing thiaether and tertiary amino groups formed supramolecular complexes with low molecular weight model DNA. Pillar[5]arene formed complexes with a DNA nucleotide pair at a ratio of 1:2 (macrocycle/DNA base pairs), as demonstrated by UV-visible and fluorescence spectroscopy. The association constants of pillar[5]arene with DNA were lgKass1:1 = 2.38 and lgKass1:2 = 5.07, accordingly. By using dynamic light scattering and transmission electron microscopy, it was established that the interaction of pillar[5]arene containing thiaether and tertiary amino groups (concentration of 10-5 M) with a model nucleic acid led to the formation of stable nanosized macrocycle/DNA associates with an average particle size of 220 nm. It was shown that the obtained compounds did not exhibit a pronounced toxicity toward human adenocarcinoma cells (A549) and bovine lung epithelial cells (LECs). The hypothesis about a possible usage of the synthesized macrocycle for the aggregation of extracellular bacterial DNA in a biofilm matrix was confirmed by the example of St. Aureus. It was found that pillar[5]arene at a concentration of 10^-5 M was able to reduce the thickness of the St. Aureus biofilm by 15%.

The Construction of Alkaline Phosphatase-Responsive Biomaterial and Its Application for In Vivo Urinary Tract Infection Therapy

Urinary tract infections caused by urinary catheter implantations are becoming more serious. Therefore, the construction of a responsive antibacterial biomaterial that can not only provide biocompatible conditions, but also effectively prevent the growth and metabolism of bacteria, is urgently needed. In this work, a benzophenone-derived phosphatase light-triggered antibacterial agent is designed and synthesized, which is tethered to the biological materials using a one-step method for in vivo antibacterial therapy. This surface could kill gram-positive bacteria (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli). More importantly, because this material exhibited a zwitterion structure, it does not damage blood cells and tissue cells. When the bacteria interact with this surface, the initial fouling of the bacteria is reduced by zwitterion hydration. When the bacteria actively accumulate and metabolize to produce a certain amount of alkaline phosphatase, the surface immediately started the sterilization performance, and the bactericidal effect is achieved by destroying the bacterial cell membrane. In summary, an antibacterial biomaterial that shows biocompatibility with mammalian cells is successfully constructed, providing new ideas for the development of intelligent urinary catheters.

Dual-Cascade Responsive Nanoparticles Enhance Pancreatic Cancer Therapy by Eliminating Tumor-Resident Intracellular Bacteria

The limited drug penetration and robust bacteria-mediated drug inactivation in pancreatic cancer result in the failure of chemotherapy. To fight against these issues, a dual-cascade responsive nanoparticle (sNP@G/IR) that can sequentially trigger deep penetration, killing of intratumor bacteria, and controlled release of chemo-drug, is reported. sNP@G/IR consists of a hyaluronic acid (HA) shell and glutathione (GSH)-responsive polymer-core (NP@G/IR), that encapsulates gemcitabine (Gem) and photothermal agent (IR1048). The polymer core, as an antibiotic alternative, is tailored to exert optimal antibacterial activity and selectivity. sNP@G/IR actively homes in on the tumor due to the CD44 targeting of the HA shell, which is subsequently degraded by the hyaluronidase in the extracellular matrix. The resultant NP@G/IR in decreased size and reversed charge facilitates deep tumor penetration. After cellular endocytosis, the exposed guanidine on NP@G/IR kills intracellular bacteria through disrupting cell membranes. Intracellular GSH further triggers the controlled release of the cargo. Thus, the protected Gem eventually induces cell apoptosis. Under laser irradiation, the hyperthermia of IR1048 helps further elimination of tumors and bacteria. Moreover, sNP@G/IR activates immune response, thereby reinforcing anticancer capacity. Therefore, this dual-cascade responsive sNP@G/IR eliminates tumor-resident intracellular bacteria and augments drug delivery efficacy, providing a new avenue for improving cancer therapy.

Phytochemical Composition, Antibacterial, Antioxidant and Antidiabetic Potentials of Cydonia oblonga Bark

Cydonia oblonga is a medicinal plant that is used to treat a number of health complications in traditional medication systems. The objective of this study was to evaluate the phytochemical composition, and antibacterial, antioxidant, and ant-diabetic potentials of methanolic extracts of Cydonia oblonga bark. The Cydonia oblonga bark extraction was fractionated through HPLC and seven purified fractions labeled as F1, F2, F3, F4, F5, F6, and F7 were obtained. The HPLC-UV analysis of methanolic extract showed the presence of a number of possible compounds. The GC-MS and HPLC analysis confirmed the presence of the following bioactive compounds in the crude extract and purified fractions: malic acid, mandelic acid, quercetin, caffeic acid, catechin hydrate, as morin (HPLC analysis), BIS-(2-ethylhexyl)phthalate and diisooctyl phthalate (F1), carbamide (F2, used as fertilizer), octasiloxane and dimethylsiloxanecyclictrimer (F3), silicic acid and cyclotrisiloxane (F4), 6-AH-cAMP, 4H-cyclopropa[5′,6′]benz[1′,2′,7,8]azule, and 4-(4-chlorophenyl)-3-morpholinepyrol-2-yl)-butenedioic acid (F5), isopropyamine (F6), and 1-propylhydrazine (F7). The extract and purified fractions were then tested for biological activities. All the purified fractions and methanolic extract showed effective antibacterial activity; however, the highest activity was recorded for methanolic extract against Staphylococcus aureus and Streptococcus pneumonia. Antioxidant evaluation of methanolic extract and purified fractions against DPPH showed strong % inhibition of the synthetic free radical. The methanolic extract exhibited 87.41 ± 0.54% inhibition whereas fractions showed: F1, 85.45 ± 0.85; F2, 65.78 ± 0.68; F3, 58.61 ± 0.58; F4, 80.76 ± 0.59; F5, 571.29 ± 0.49; F6, 85.28 ± 0.94; and F7, 48.45 ± 0.62% inhibition. Ascorbic acid (standard) was used as a control with 94.88 ± 0.56% inhibition at a maximum concentration of 1000 µg/mL. The α-glucosidase inhibition assay of methanolic extract and purified fractions at a maximum concentration of 1000 µg/mL showed activities as: methanolic extract, 78.21 ± 0.67; F1, 55.01 ± 0.29; F2, 56.10 ± 0.24; F3, 62.44 ± 1.03; F4, 70.52 ± 0.15; F5, 62.18 ± 0.92; F6, 72.68 ± 0.2; and F7, 57.33 ± 0.05% inhibition. α-Amylase % inhibition of methanolic extract and purified fractions were noted as: methanolic extract, 77.98 ± 0.57; F1, 79.72 ± 0.02; F2, 79.72 ± 0.02; F3, 82.16 ± 0.48; F4, 77.37 ± 0.28; F5, 72.14 ± 0.30; F6, 74.24 ± 0.29; and F7, 56.58 ± 0.10 at the highest concentration of 1000 µg/mL. Acarbose (standard) showed 87.65 ± 0.71% inhibition of α-glucosidase and 85.99 ± 0.44% inhibition of α-amylase at the highest concentration of 1000 µg/mL. It was found that all biological activities of methanolic extract and purified fractions might be attributed to the fact that they are rich sources of phenolic and flavonoids along with other bioactive compounds. The total phenolic and flavonoid contents of methanolic extract were recorded higher as compared to purified fractions (TPC = 70% and TFC = 69%). Amongst the purified fractions, fraction 6 exhibited the highest TPC value (64%), and purified fraction 1 exhibited the highest value of TFC (58%). Recent research demonstrated that Cydonia oblonga may be considered an antibacterial medicinal plant. The result of the present study revealed that it might be utilized for the isolation of bioactive phytochemicals that can lead to new opportunities in the discovery of new antibiotics.

Breaching Bacterial Biofilm Barriers: Efficient Combinatorial Theranostics for Multidrug-Resistant Bacterial Biofilms with a Novel Penetration-Enhanced AIEgen Probe

The formation of microbial biofilms is acknowledged as a major virulence factor in a range of persistent local infections. Failures to remove biofilms with antibiotics foster the emergence of antibiotic-resistant bacteria and result in chronic infections. As a result, the construction of effective biofilm-inhibiting and biofilm-eradicating chemicals is urgently required. Herein, we designed a water-soluble probe APDIS for membrane-active fluorescence and broad-spectrum antimicrobial actions, particularly against methicillin-resistant Staphylococcus aureus (MRSA), which shows multidrug resistance. In vitro and in vivo experiments demonstrate its high antibacterial effects comparable to vancomycin. Furthermore, it inhibits biofilm formation by effectively killing planktonic bacteria at low inhibitory concentrations, without toxicity to mammalian cells. More importantly, this probe can efficiently penetrate through biofilm barriers and exterminate bacteria that are enclosed within biofilms and startle existing biofilms. In the mouse model of implant-related biofilm infections, this probe exhibits strong antibiofilm activity against MRSA biofilms, thus providing a novel theranostic strategy to disrupt biofilms in vivo effectively. Our results indicate that this probe has the potential to be used for the development of a combinatorial theranostic platform with synergistic enhanced effects for the treatment of multidrug-resistant bacterial infections and antibiofilm medications.

AIE-Active Antibiotic Photosensitizer with Enhanced Fluorescence in Bacteria Infected Cells and Better Therapy Effect toward Drug-Resistant Bacteria

It is well-known that bacterial infections will induce a variety of diseases in the clinic. In particular, the emergence of drug-resistant bacteria has increased the threat to human health. The development of multiple modes of therapy will effectively fight against drug-resistant bacterial infections. In this work, we covalently attached an AIE photosensitizer to the antibiotic of moxifloxacin hydrochloride (MXF-HCl) and synthesized an antibiotic derivative, MXF-R, with pharmacological activity and photodynamic activation. In infected cells, MXF-R showed enhanced fluorescence after it specifically binds to bacteria; thus, in situ visualization of the bacteria was realized. Notably, through chemo- and photodynamic therapy, MXF-R exhibited better antibacterial activity than its parent antibiotic in rapid sterilization, and it achieved effective killing for moxifloxacin resistant bacteria. In addition, MXF-R shows a broad-spectrum antibacterial effect and could be used in the recovery therapy of infected wounds in mice, demonstrative of a significant therapeutic effect and good biological safety. Thus, as a promising multifunctional antibacterial agent, MXF-R will have tremendous potential in in situ visualization study and killing of drug-resistant bacteria. This work provides an innovative strategy for solving critical disease through the combination of materials and biomedical sciences.

A new self-immolative colistin prodrug with dual targeting functionalities and reduced toxicity for the treatment of intracellular bacterial infections

Colistin is a potent antibiotic but its severe side effects including nephrotoxicity and neurotoxicity are the roadblock for their wide use in clinics. To solve this problem, we synthesized a new prodrug, mannose-maltose-colistin conjugate, termed MMCC that can reversibly mask the five amines of colistin that are primarily responsible for the toxicity. The deliberated design of disulfide-based self-immolative linker warranted the reversibly release of the pristine amines of colistin on demand without sacrificing antimicrobial efficacy. Once MMCC was delivered in cells, reducing agents cleaves the disulfide bond and release the pristine amines. The targeting ligands of maltose and mannose were grafted on colistin conjugate for targeting delivery of colistin to bacteria and macrophages, respectively. Taken together, MMCC as a new class of antimicrobial biomaterials, demonstrates its great potential for the treatment of intracellular bacterial infections.

Dynamic grafting of carboxylates onto poly(vinyl alcohol) polymers for supramolecularly-crosslinked hydrogel formation

Supramolecular hydrogels have attracted considerable interest due to their unique stimuli-responsive and self-healing properties. However, these hydrogel systems are usually achieved by covalent grafting of supramolecular units onto the polymer backbone, which in turn limits their reprocessability. Herein, we prepared a supramolecular hydrogel system by forming dynamic covalent crosslinks between 4-carboxyphenylboronic acid (CPBA) and polyvinyl alcohol (PVA). The system was then further crosslinked with either calcium ions or branched polyethylenimine (PEI) to generate hydrogels with distinctly different properties. Incorporation of calcium ions resulted in the formation of hydrogels with higher storage modulus of 7290 Pa but without self-healing properties. On the other hand, PEI-crosslinked hydrogel (PVA-CPBA-PEI) exhibited >2000% critical strain value, demonstrated high stability over 52 days and showed sustained antibacterial effect. A combination of supramolecular interactions and dynamic covalent crosslinks can be an alternate strategy to fabricate next generation hydrogel materials.

Supramolecular Adhesive Materials with Antimicrobial Activity for Emerging Biomedical Applications

Traditional adhesives or glues such as cyanoacrylates, fibrin glue, polyethylene glycol, and their derivatives have been widely used in biomedical fields. However, they still suffer from numerous limitations, including the mechanical mismatch with biological tissues, weak adhesion on wet surfaces, biological incompatibility, and incapability of integrating desired multifunction. In addition to adaptive mechanical and adhesion properties, adhesive biomaterials should be able to integrate multiple functions such as stimuli-responsiveness, control-releasing of small or macromolecular therapeutic molecules, hosting of various cells, and programmable degradation to fulfill the requirements in the specific biological systems. Therefore, rational molecular engineering and structural designs are required to facilitate the development of functional adhesive materials. This review summarizes and analyzes the current supramolecular design strategies of representative adhesive materials, serving as a general guide for researchers seeking to develop novel adhesive materials for biomedical applications.

Metal organic framework-based antibacterial agents and their underlying mechanisms

Bacteria, as the most abundant living organisms, have always been a threat to human life until the development of antibiotics. However, with the wide use of antibiotics over a long time, bacteria have gradually gained tolerance to antibiotics, further aggravating threat to human beings and environmental safety significantly. In recent decades, new bacteria-killing methods based on metal ions, hyperthermia, free radicals, physical pricks, and the coordination of several multi-mechanisms have attracted increasing attention. Consequently, multiple types of new antibacterial agents have been developed. Among them, metal organic frameworks (MOFs) appear to play an increasingly important role. The unique characteristics of MOFs make them suitable multiple-functional platforms. By selecting the appropriate metastable coordination bonds, MOFs can act as reservoirs and release antibacterial metal ions or organic linkers; by constructing a porous structure, MOFs can act as carriers for multiple types of agents and achieve slow and sustained release; and by designing their composition and the pore structure precisely, MOFs can be endowed with properties to produce heat and free radicals under stimulation. Importantly, in combination with other materials, MOFs can act as a platform to kill bacteria effectively through the synergistic effect of multiple types of mechanisms. In this review, we focus on the recent development of MOF-based antibacterial agents, which are classified according to their antibacterial mechanisms.

Current Advances in the Development of Hydrogel-Based Wound Dressings for Diabetic Foot Ulcer Treatment

Diabetic foot ulcers (DFUs) are one of the most prevalent complications associated with diabetes mellitus. DFUs are chronic injuries that often lead to non-traumatic lower extremity amputations, due to persistent infection and other ulcer-related side effects. Moreover, these complications represent a significant economic burden for the healthcare system, as expensive medical interventions are required. In addition to this, the clinical treatments that are currently available have only proven moderately effective, evidencing a great need to develop novel strategies for the improved treatment of DFUs. Hydrogels are three-dimensional systems that can be fabricated from natural and/or synthetic polymers. Due to their unique versatility, tunability, and hydrophilic properties, these materials have been extensively studied for different types of biomedical applications, including drug delivery and tissue engineering applications. Therefore, this review paper addresses the most recent advances in hydrogel wound dressings for effective DFU treatment, providing an overview of current perspectives and challenges in this research field.

Recent Progress on Bioinspired Antibacterial Surfaces for Biomedical Application

Surface bacterial fouling has become an urgent global challenge that calls for resilient solutions. Despite the effectiveness in combating bacterial invasion, antibiotics are susceptible to causing microbial antibiotic resistance that threatens human health and compromises the medication efficacy. In nature, many organisms have evolved a myriad of surfaces with specific physicochemical properties to combat bacteria in diverse environments, providing important inspirations for implementing bioinspired approaches. This review highlights representative natural antibacterial surfaces and discusses their corresponding mechanisms, including repelling adherent bacteria through tailoring surface wettability and mechanically killing bacteria via engineering surface textures. Following this, we present the recent progress in bioinspired active and passive antibacterial strategies. Finally, the biomedical applications and the prospects of these antibacterial surfaces are discussed.

Recent Development of Polydopamine Anti-Bacterial Nanomaterials

Polydopamine (PDA), as a mussel-inspired material, exhibits numerous favorable performance characteristics, such as a simple preparation process, prominent photothermal transfer efficiency, excellent biocompatibility, outstanding drug binding ability, and strong adhesive properties, showing great potential in the biomedical field. The rapid development of this field in the past few years has engendered substantial progress in PDA antibacterial materials. This review presents recent advances in PDA-based antimicrobial materials, including the preparation methods and antibacterial mechanisms of free-standing PDA materials and PDA-based composite materials. Furthermore, the urgent challenges and future research opportunities for PDA antibacterial materials are discussed.

Preparation and shape change of silver nanoparticles (AgNPs) loaded on the dialdehyde cellulose by in-situ synthesis method

With the improvement of medical and health care level in our society, the demand for antibacterial materials is increasing. In this work, we prepared the antibacterial materials by loading silver nanoparticles (AgNPs) on the dialdehyde cellulose (DAC) with in-situ synthesis method. DAC was prepared by pretreating cellulose fiber with sodium metaperiodate (NaIO₄) to convert the hydroxyl group into aldehyde group, and then reacted with silver nitrate (AgNO₃) to obtain AgNPs loaded on DAC. UV-Vis results show that the characteristic absorption peak of AgNPs at 428 nm appeared in the AgNPs-loaded-DAC. It was observed by SEM that the spherical AgNPs were distributed uniformly on the DAC surface without obvious flocculation. The color of DAC was not changed significantly, indicating that a small amount of AgNPs was loaded. In addition, sodium citrate (Na₃C₆H₅O₇) was added in the reaction of DAC and AgNO₃ and its effect on the formation of AgNPs was studied. The results demonstrated that the color of DAC turned deeper and finally dark yellow with reaction time extended. When the reaction time was 60 h, the spherical AgNPs were gradually grown and transformed into triangular prism on the DAC surface. The antibacterial properties of AgNPs showed inhibition zones of 4.90 mm and 7.35 mm (60 h) against Gram-negative (E. coli) and Gram-positive (S. aureus), respectively, which increased by 40.00% and 14.85% compared with spherical AgNPs (2.5 h) obtained without Na₃C₆H₅O₇. The research of AgNPs-loaded cellulose-based materials promotes the development prospect of new nano-antibacterial materials.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10570-022-04692-6.

Levofloxacin Cocrystal/Salt with Phthalimide and Caffeic Acid as Promising Solid-State Approach to Improve Antimicrobial Efficiency

To overcome the issue of multidrug resistant (MDR) microbes, the exploration of ways to improve the antimicrobial efficiency of existing antibiotics is one of the promising approaches. In search of synthons with higher efficiency, in current investigations, cocrystal and amorphous salt of levofloxacin hemihydrate (LEV) were developed with phthalimide (PTH) and caffeic acid (CFA). New materials were characterized with the help of FT-IR, Raman spectroscopy, powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Shifting, attenuation, appearance/disappearance and broadening of bands were observed in the FT-IR and Raman spectra of the materials as evidence of the required product. The PXRD diffraction pattern observed for LEV-PTH indicated cocrystal while halo diffractogram of LEV-CFA revealed amorphous nature. DSC/TG analysis confirmed the hydrated nature of the cocrystal/salt. The dissolution rate and antimicrobial activity against selected strains, K.pneumonia, E. coli and S. typhi of parent drug and the new material were compared. The zone of inhibition (ZI) observed for 5 µg LEV-PTH was 30.4 + 0.36 (K. pneumonia), 26.33 + 0.35 (E. coli) and 30.03 + 0.25 mm (S. typhi) while LEV-CFA salt (5 µg) against the same strains inhibited 33.96 ± 0.25, 31.66 ± 0.35 and 27.93 ± 0.40 mm, respectively. These novel formulations enhance the dissolution rate as well as antibacterial efficiency and are expected to be potent against MDR bacterial strains.

Intelligent design of polymersomes for antibacterial and anticancer applications

Polymersomes (or polymer vesicles) have attracted much attention for biomedical applications in recent years because their lumen can be used for drug delivery and their coronas and membrane can be modified with a variety of functional groups. Thus, polymersomes are very suitable for improved antibacterial and anticancer therapy. This review mainly highlighted recent advances in the synthetic protocols and design principles of intelligent antibacterial and anticancer polymersomes. Antibacterial polymersomes are divided into three categories: polymersomes as antibiotic nanocarriers, intrinsically antibacterial polymersomes, and antibacterial polymersomes with supplementary means including photothermal and photodynamic therapy. Similarly, the anticancer polymersomes are divided into two categories: polymersomes-based delivery systems and anticancer polymersomes with supplementary means. In addition, the bilateral relationship between bacteria and cancer is addressed, since more and more evidences show that bacteria may cause cancer or promote cancer progression. Finally, prospective on next-generation antibacterial and anticancer polymersomes are discussed. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Biology-Inspired Nanomaterials > Lipid-Based Structures.

A Bacteria-Responsive Porphyrin for Adaptable Photodynamic/Photothermal Therapy

We report a cationic porphyrin 5,10,15,20-tetrakis-(4-N-methylpyridyl)-porphyrin (TMPyP) that can respond to specific bacteria, followed by adaptable photodynamic/photothermal therapy processes. TMPyP could be reduced to phlorin by facultative anaerobes with a strong reducing ability such as E. coli and S. typhimurium in hypoxic environments, possessing strong NIR absorption and remarkable photothermal conversion capacity, thus demonstrating excellent antimicrobial activity (>99 %) by photothermal therapy. While in an aerobic environment with aerobic bacteria, TMPyP functioned as a typical photosensitizer that killed bacteria effectively (>99.9 %) by photodynamic therapy. By forming a host-guest complex with cucurbit[7]uril, the biocompatibility of TMPyP significantly improved. This kind of bacteria-responsive porphyrin shows specificity and adaptivity in antimicrobial treatment and holds potential in non-invasive treatments of bacterial infections.

Dithienylethene-Bridged Fluoroquinolone Derivatives for Imaging-Guided Reversible Control of Antibacterial Activity

The emerging field of photopharmacology has offered a promising alternative to guard against the bacterial resistance by effectively avoiding antibiotic accumulation in the body or environment. However, the degradation, toxicity, and thermal reversibility have always been an ongoing concern for potential applications of azobenzene-based photopharmacology. Developing novel photopharmacological agents based on a more matched switch is highly in demand and remains a major challenge. Herein, two novel dithienylethene-bridged dual-fluoroquinolone derivatives have been developed by introducing two fluoroquinolone drugs into both ends of the dithienylethene (DTE) switch, in which the fluoroquinolone acts as a fluorophore except for the pharmacodynamic component. For comparison, two monofluoroquinolone-DTE hybrids were also prepared by a similar strategy. As expected, these resultant DTE-based antibacterial agents displayed efficient photochromism and fluorescence switching behavior in dimethyl sulfoxide. Moreover, improved antibacterial activities compared to those of monofluoroquinolone derivatives and a maximum fourfold active difference against Escherichia coli (E. coli) for open and closed isomers and photoswitchable bacterial imaging for Staphylococcus aureus and E. coli were observed. The molecular docking to DNA gyrase gave a rationale for the discrepancies in antibacterial activity for both isomers. Therefore, these fluoroquinolone derivatives can act as interesting imaging-guided photopharmacological agents for further in vivo studies.

An Effective Strategy to Develop Potent and Selective Antifungal Agents from Cell Penetrating Peptides in Tackling Drug-Resistant Invasive Fungal Infections

The high mortality rate of invasive fungal infections and quick emergence of drug-resistant fungal pathogens urgently call for potent antifungal agents. Inspired by the cell penetrating peptide (CPP) octaarginine (R8), we elongated to 28 residues poly(d,l-homoarginine) to obtain potent toxicity against both fungi and mammalian cells. Further incorporation of glutamic acid residues shields positive charge density and introduces partial zwitterions in the obtained optimal peptide polymer that displays potent antifungal activity against drug-resistant fungi superior to antifungal drugs, excellent stability upon heating and UV exposure, negligible in vitro and in vivo toxicity, and strong therapeutic effects in treating invasive fungal infections. Moreover, the peptide polymer is insusceptible to antifungal resistance owing to the unique CPP-related antifungal mechanism of fungal membrane penetration followed by disruption of organelles within fungal cells. All these merits imply the effectiveness of our strategy to develop promising antifungal agents.

Microbial Metabolite Inspired β-Peptide Polymers Displaying Potent and Selective Antifungal Activity

Potent and selective antifungal agents are urgently needed due to the quick increase of serious invasive fungal infections and the limited antifungal drugs available. Microbial metabolites have been a rich source of antimicrobial agents and have inspired the authors to design and obtain potent and selective antifungal agents, poly(DL-diaminopropionic acid) (PDAP) from the ring-opening polymerization of β-amino acid N-thiocarboxyanhydrides, by mimicking ε-poly-lysine. PDAP kills fungal cells by penetrating the fungal cytoplasm, generating reactive oxygen, and inducing fungal apoptosis. The optimal PDAP displays potent antifungal activity with minimum inhibitory concentration as low as 0.4 µg mL-1 against Candida albicans, negligible hemolysis and cytotoxicity, and no susceptibility to antifungal resistance. In addition, PDAP effectively inhibits the formation of fungal biofilms and eradicates the mature biofilms. In vivo studies show that PDAP is safe and effective in treating fungal keratitis, which suggests PDAPs as promising new antifungal agents.

Degradable Pseudo Conjugated Polymer Nanoparticles with NIR-II Photothermal Effect and Cationic Quaternary Phosphonium Structural Bacteriostasis for Anti-Infection Therapy

Photothermal therapy based on conjugated polymers represents a promising antibacterial strategy but still possesses notable limitations. Herein, degradable pseudo conjugated polymers (PCPs) containing photothermal molecular backbones and reactive oxygen species (ROS)-sensitive thioketal bonds are designed. Triphenylphosphine (PPh3 ) is introduced into PCPs to generate phosphonium-based PCPs (pPCPs), which further assembled with hyaluronic acid into pPCP nanoparticles (pPCP-NPs). pPCP-NPs with quaternary phosphonium cations selectively anchor on and destroy bacterial cell membranes through electrostatic action. Under 1064 nm laser irradiation, pPCP-NPs (pPCP-NPs/+L) produce near-infrared-II (NIR-II) photothermal antibacterial effect, thereby killing bacteria in a sustained manner. pPCP-NPs are readily degraded upon ROS abundant at infection sites, therefore exhibiting enough biosafety. pPCP-NPs/+L display an almost 100% bacterial inhibition rate in vitro and resultin a nearly complete recovery of bacteria-induced mouse wounds. A further metabolomics analysis denotes that pPCP-NPs/+L work in a concerted way to induce bacterial DNA damage, inhibit bacterial carbon/nitrogen utilization and amino acid/nucleotide synthesis. Taken together, degradable pPCP-NPs with both NIR-II photothermal effect and cationic phosphonium structural bacteriostasis provide a new avenue for antibiotics-alternative anti-infection therapy.

A Perfect Pair: Stabilized Black Phosphorous Nanosheets Engineering with Antimicrobial Peptides for Robust Multidrug Resistant Bacteria Eradication

Black phosphorus (BP) nanosheets emerged as promising 2D nanomaterial that have been applied to eradicate antibiotic-resistant bacteria. However, their applications are limited by intrinsic ambient instability. Here, the ε-poly-l-lysine (ε-PL)-engineered BP nanosheets are constructed via simple electrostatic interaction to cater the demand for passivating BP with amplified antibacterial activity. The dual drug-delivery complex named BP@ε-PL can closely anchor onto the surface of bacteria, leading to membrane disintegration. Subsequently, in situ hyperthermia generated by BP under near-infrared (NIR) irradiation can precisely eradicate pathogenic bacteria. In vitro antibacterial studies verify the rapid disinfection ability of BP@ε-PL against Methicillin-resistant Staphylococcus aureus (MRSA) within 15 min. Moreover, ε-PL can serve as an effective protector to avoid chemical degradation of bare BP. The in vivo antibacterial study shows that a 99.4% antibacterial rate in a MRSA skin infection model is achieved, which is accompanied by negligible toxicity. In conclusion, this work not merely provides a new conjecture for protecting the BP, but also opens a novel window for synergistic antibiotic-resistant bacteria therapy based on antimicrobial peptides and 2D photothermal nanomaterial.

Photodynamic Antitumor and Antimicrobial Activities of Free-Base Tetra(4-methylthiolphenyl)chlorin and Its Tin(IV) Complex

Meso-tetra(4-methylthiolphenyl)chlorin (3) and its Sn(IV) complex (3-Sn) have been synthesized and characterized. The heavy atom effects of the Sn(IV) ion and sulfur atoms result in relatively high singlet oxygen quantum yield values of 0.40 and 0.48. The photodynamic activities against MCF-7 breast cancer cells were determined through irradiation with a Thorlabs 660 nm LED for 30 min (280 mW.cm-2). IC50 values of 7.8 and 3.9 μM were obtained, respectively. 3-Sn was found to have significant photodynamic antimicrobial activity against both gram-(+) S. aureus and gram-(-) E. coli bacteria upon irradiation with a Thorlabs 660 nm LED for 75 min.

Hybrid Macrocyclic Polymers: Self-Assembly Containing Cucurbit[m]uril-pillar[n]arene

Supramolecular self-assembly by hybrid macrocycles containing both cucurbit[m]uril (CB[m]) and pillar[n]arene was discussed and summarized in this review. Due to different solubility, diverse-sized cavities, and various driving forces in recognizing guests, the role of CB[m] and pillar[n]arene in such hybrid macrocyclic systems could switch between competitor in capturing specialized guests, and cooperator for building advanced hybridized macrocycles, by controlling their characteristics in host-guest inclusions. Furthermore, both CB[m] and pillar[n]arene were employed for fabricating advanced supramolecular self-assemblies such as mechanically interlocked molecules and supramolecular polymers. In those self-assemblies, CB[m] and pillar[n]arene played significant roles in, e.g., microreactor for catalyzing particular reactions to bridge different small pieces together, molecular "joint" to connect different monomers into larger assemblies, and "stabilizer" in accommodating the guest molecules to adopt a favorite structure geometry ready for assembling.

Short Guanidinium-Functionalized Poly(2-oxazoline)s Displaying Potent Therapeutic Efficacy on Drug-Resistant Fungal Infections

New antifungals are urgently needed to combat invasive fungal infections, due to limited types of available antifungal drugs and frequently encountered side effects, as well as the quick emergence of drug-resistance. We previously developed amine-pendent poly(2-oxazoline)s (POXs) as synthetic mimics of host defense peptides (HDPs) to have antibacterial properties, but with poor antifungal activity. Hereby, we report the finding of short guanidinium-pendent POXs, inspired by cell-penetrating peptides, as synthetic mimics of HDPs to display potent antifungal activity, superior mammalian cells versus fungi selectivity, and strong therapeutic efficacy in treating local and systemic fungal infections. Moreover, the unique antifungal mechanism of fungal cell membrane penetration and organelle disruption explains the insusceptibility of POXs to antifungal resistance. The easy synthesis and structural diversity of POXs imply their potential as a class of promising antifungal agents.

Peptide-Engineered AIE Nanofibers with Excellent and Precisely Adjustable Antibacterial Activity

Photosensitizers with aggregation-induced emission properties (AIEgens) can produce reactive oxygen species (ROS) under irradiation, showing great potential in the antibacterial field. However, due to the limited molecular skeletons, the development of AIEgens with precisely adjustable antibacterial activity is still a daunting challenge. Herein, a series of AIE nanofibers (AIE-NFs) based on the AIEgen of DTPM as the inner core and rationally designed peptides as bacterial recognition ligands (e.g., antimicrobial peptide (AMP) HHC36, ditryptophan, polyarginine, and polylysine) is developed. These AIE-NFs show precisely adjustable antibacterial behaviors simply by changing the decorated peptides, which can regulate the aggregation and inhibition of different bacteria. By mechanistic analysis, it is demonstrated that this effect can be attributed to the synergistic antibacterial activities of the ROS and the peptides. It is noteworthy that the optimized AIE-NFs, NFs-K18, can efficiently aggregate bacteria to cluster and kill four types of clinical bacteria under irradiation in vitro, inhibit the infection of methicillin-resistant Staphylococcus aureus (MRSA) and promote wound healing in vivo. To the authors' knowledge, this is the first report of AIE-NFs with precisely adjustable antibacterial activity, providing new opportunities for photodynamic therapy (PDT) treatment of infection.

pH-responsive curcumin-based nanoscale ZIF-8 combining chemophotodynamic therapy for excellent antibacterial activity

Antimicrobial photodynamic therapy (aPDT) is a highly attractive therapy due to its advantages of being a non-antibiotic procedure for reducing drug-resistant microbes. Curcumin (CCM) has been considered as a natural photosensitizer for PDT with prominent antibacterial, antifungal, and anti-proliferative activity. However, its excellent biological and pharmacological activities are limited because of its low solubility, rapid metabolization and instability. Herein, we reported a promising agent based on CCM-incorporated into zeolitic imidazolate framework-8 (ZIF@CCM). The as-prepared nanoparticle exhibited high drug loading capability (11.57%) and drug loading encapsulation (82.76%). Additionally, ZIF@CCM displayed a pH-responsive drug release behavior and chemophotodynamic therapy for excellent antibacterial activity. The underlying mechanism elucidated that Zn2+ released from ZIF-8 increased the permeability of the bacterial cell membrane with leakages of K+. The overproduction of extracellular ROS further resulted in the disrupted bacterial cell membrane and distorted bacterial morphology. Thus, ZIF@CCM-mediated photodynamic activation might be a promising treatment strategy for microbial inactivation.

The Construction of Cucurbit[7]uril-Based Supramolecular Nanomedicine for Glioma Therapy

Two supramolecular nanomedicines (CB[7]⊃DOX and CB[7]⊃CPT) based on the host–guest recognition between CB[7] and anticancer drugs were constructed. After supramolecular modification, the stability and water solubility of DOX and CPT were greatly improved, and the anticancer activities of chemotherapeutic drugs were effectively maintained. This work provided a simple but efficient method to enrich supramolecular nanomedicines for cancer therapy.

Degradable Bactericide Constructed Using a Charge-Reversal Surfactant against Plant Pathogenic Bacteria

Plant bacterial diseases are serious problems in agriculture, posing threats to global food security and the agricultural economy. Here, a degradable agricultural bactericide AMC-10 constructed using a charge-reversal surfactant, from being positively charged to negatively charged, was designed and synthesized. AMC-10 possessed high bactericidal activity toward plant pathogenic bacteria, consequently being able to inhibit the corresponding plant bacterial diseases. After degradation by water, the hydrolyzed products were nontoxic to bacteria and human cells. Such a degradable bactericide provides new ideas for the design of environmentally friendly agricultural bactericides. It is anticipated that degradable bactericides such as AMC-10 can be applied in the prevention and control of plant bacterial diseases, being less likely to produce toxicity or drug resistance.

Phthalocyanine-Assembled "One-For-Two" Nanoparticles for Combined Photodynamic-Photothermal Therapy of Multidrug-Resistant Bacteria

The treatment of diseases caused by drug-resistant bacterial infections urgently requires new types of broad-spectrum antimicrobial materials. Herein, we introduce a supramolecular self-assembly, NanoPcN, which realizes the combination of type I photodynamic activity and photothermal effects by modifying zinc(II) phthalocyanine with a 3-(dimethylamino) phenoxy group. Antibacterial experiments demonstrate that this "one-for-two" property endows NanoPcN with excellent antimicrobial efficacy, not only against Gram-positive and Gram-negative bacteria but also against multidrug-resistant bacteria. An ultralow concentration of NanoPcN (50 nM) almost completely inhibited the growth of methicillin-resistant Staphylococcus aureus upon 655 nm laser irradiation (0.5 W/cm²) for 2 min, and the antibacterial effect was significantly stronger than that of the known photosensitizers methylene blue and tetraphenylporphyrin tetrasulfonic acid. Thus, the construction of "one-for-two" materials through a simple molecular structure modification paves a feasible way for the development of effective broad-spectrum antibacterial agents.

Pillar[5]arene-Based Acid-Triggered Supramolecular Porphyrin Photosensitizer for Combating Bacterial Infections and Biofilm Dispersion

The treatment of pathogenic bacterial infection has long been the most serious threat to human life and attracted widespread attention. Herein, a supramolecular photosensitizer platform based on carboxylatopillar[5]arene (CP5) and tetrafluorophenyl porphyrin functionalized with a quaternary ammonium group (TFPP-QA) for combating bacteria and dispersing biofilm via photodynamic treatment is constructed. By introducing the host macrocycle CP5 and host-guest interaction, the supramolecular photosensitizer has great biocompatibility and acid responsiveness. On the one hand, the acid-triggered dissociation of TFPP-QA/CP5 could induce the porphyrin photosensitizer to target bacterial cells and disrupt the charge balance of bacterial membranes, enhance the permeability of the bacterial membrane. On the other hand, the TFPP-QA/CP5 antibacterial platform possesses superb reactive oxygen species (ROS) generation capability under light irradiation, leading to enhanced photodynamic antibacterial efficacy. The in vitro and in vivo studies show that the supramolecular photosensitizers exhibit high antibacterial efficiency and biofilm dissipation effect under 660 nm light irradiation. Therefore, it is anticipated that the rational design and integration of photosensitizers and quaternary ammonium compounds through the supramolecular strategy would provide a promising prospect for clinical photodynamic antimicrobial therapy.

Low-Molecular-Weight Polylysines with Excellent Antibacterial Properties and Low Hemolysis

The steady development of bacterial resistance has become a global public health issue, and new antibacterial agents that are active against drug-resistant bacteria and less susceptible to bacterial resistance are urgently needed. Here, a series of low-molecular-weight cationic polylysines (C_x-PLL_n) with different hydrophobic end groups (C_x) and degrees of polymerization (PLL_n) was synthesized and used in antibacterial applications. All the obtained C_x-PLL_n have antibacterial activity. Among them, C₆-PLL₁₃ displays the best antibacterial effect for Gram-positive bacteria, that is, Staphylococcus aureus (S. aureus) and methicillin-resistant Staphylococcus aureus (MRSA), and highest selectivity against Gram-positive bacteria. A mechanistic study revealed that the C₆-PLL₁₃ destroys the integrity of the bacterial cell membrane and causes effective bacterial death. Owing to this membrane-disrupting property, C₆-PLL₁₃ showed rapid bacterial killing kinetics and was not likely to develop resistance after repeat treatment (up to 13 generations). Moreover, C₆-PLL₁₃ demonstrated a significant therapeutic effect on an MRSA infection mouse model, which further proved that this synthetic polymer could be used as an effective weapon against bacterial infections.

Fabrication of Host-Guest Complexes between Adamantane-Functionalized 1,3,4-Oxadiazoles and β-Cyclodextrin with Improved Control Efficiency against Intractable Plant Bacterial Diseases

Supramolecular chemistry provides huge potentials and opportunities in agricultural pest management. In an attempt to develop highly bioactive, eco-friendly, and biocompatible supramolecular complexes for managing intractable plant bacterial diseases, herein, a type of interesting adamantane-functionalized 1,3,4-oxadiazole was rationally prepared to facilitate the formation of supramolecular complexes via β-cyclodextrin-adamantane host-guest interactions. Initial antibacterial screening revealed that most of these adamantane-decorated 1,3,4-oxadiazoles were obviously bioactive against three typically destructive phytopathogens. The lowest EC₅₀ values could reach 0.936 (III₁₈), 0.889 (III₁₈), and 2.10 (III₁₉) μg/mL against the corresponding Xanthomonas oryzae pv. oryzae (Xoo), Xanthomonas axonopodis pv. citri (Xac), and Pseudomonas syringae pv. actinidiae (Psa). Next, the representative supramolecular binary complex III₁₈@β-CD (binding mode 1:1) was successfully fabricated and characterized by ¹H nuclear magnetic resonance (NMR), isothermal titration calorimetry (ITC), high-resolution mass spectrometry (HRMS), dynamic light scattering (DLS), and transmission electron microscopy (TEM). Eventually, correlative water solubility and foliar surface wettability were significantly improved after the formation of host-guest assemblies. In vivo antibacterial evaluation found that the achieved supramolecular complex could distinctly alleviate the disease symptoms and promote the control efficiencies against rice bacterial blight (from 34.6-35.7% (III₁₈) to 40.3-43.6% (III₁₈@β-CD)) and kiwi canker diseases (from 41.0-42.3% (III₁₈) to 53.9-68.0% (III₁₈@β-CD)) at 200 μg/mL (active ingredient). The current study can provide a feasible platform and insight for constructing biocompatible supramolecular assemblies for managing destructive bacterial infections in agriculture.

β-Cyclodextrin-Derivative-Functionalized Graphene Oxide/Graphitic Carbon Nitride Composites with a Synergistic Effect for Rapid and Efficient Sterilization

The nonselectivity of phototherapy and the hydrophobicity of phototherapy agents limit their application in the treatment of antibiotic-resistant bacteria. In this work, β-cyclodextrin-derivative-functionalized graphene oxide (GO)/graphitic carbon nitride (g-C₃N₄) antibacterial materials (CDM/GO/CN) were designed and synthesized. CN is used as a photosensitizer for photodynamic therapy (PDT) and GO as a photothermal agent for photothermal therapy (PTT). In addition, the supramolecular host-guest complex on the substrate can not only increase the inherent water solubility of the substrate and reduce the aggregation of the photosensitizer/photothermal agent but also manipulate the interaction between the photosensitizer/photothermal agent and bacteria to capture specific bacteria. The hyperthermia caused by PTT denatures proteins on the cell membrane, allowing reactive oxygen species (ROS) to enter the cell better and kill bacteria. The specific capture of Escherichia coli CICC 20091 by mannose significantly improves the sterilization efficiency and reduces side effects. The synergistic antibacterial agent shows excellent antibacterial efficacy of over 99.25% against E. coli CICC 20091 after 10 min of 635 + 808 nm dual-light irradiation. Moreover, cell proliferation experiments show that the composite material has good biocompatibility, expected to have applications in bacterial infections.

Evolution of Phthalocyanine Structures as Photodynamic Agents for Bacteria Inactivation

Phthalocyanine derivatives have been proposed as photosensitizers for the treatment of several microbial infections. In this review, the progress in the structures of phthalocyanines was analyzed, considering that these compounds can easily functionalize and can form complexes with various metal ions. In this sense, different substituents were used to increase the interaction with the microorganisms, improving their photodynamic inactivation. Furthermore, these photosensitizers absorb strongly at phototherapeutic window, emit red fluorescence, and efficiently produce the formation of reactive oxygen species. Subsequently, the influence of binding, bacteria types, cell density, washing effect, and media on photoinactivation was remarked to elimination of microbes. Finally, photokilling of bacterial biofilm by phthalocyanines and the mechanism of action were discussed. Therefore, this review brings together the main features of phthalocyanines as antimicrobial phototherapeutic agents.

Silver Cluster-Porphyrin-Assembled Materials as Advanced Bioprotective Materials for Combating Superbacteria

Superbugs are bacteria that have grown resistant to most antibiotics, seriously threating the health of people. Silver (Ag) nanoparticles are known to exert a wide-spectrum antimicrobial property, yet remains challenging against superbugs. Here, Ag clusters are assembled using porphyrin-based linkers and a novel framework structure (Ag9 -AgTPyP) is produced, in which nine-nuclearity Ag9 clusters are uniformly separated by Ag-centered porphyrin units (AgTPyP) in two dimensions, demonstrating open permeant porosity. Ag9 -AgTPyP eliminates over 99.99999% and 99.999% methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa (P. aeruginosa) within 2 h upon visible-light irradiation, which are superior to a majority of bacteria inactivation photocatalysts. The novel-established long-term charge-transfer states from AgTPyP to adjacent Ag9 cluster that has preferential affinity to O2 greatly promote reactive oxygen species (ROS) production efficiency; and its unique framework accelerates the ROS transportation. Personal protective equipment (masks and protective suits) incorporating Ag9 -AgTPyP film also shows excellent performances against superbugs. This superbugs-killing efficiency is unprecedented among silver complexes and porphyrin derivatives. Utilizing efficient photogenerated electrons and holes between metal cluster and linkers can open up new interests of research in photocatalytic areas.

Nanoplatforms for Sepsis Management: Rapid Detection/Warning, Pathogen Elimination and Restoring Immune Homeostasis

Sepsis, a highly life-threatening organ dysfunction caused by uncontrollable immune responses to infection, is a leading contributor to mortality in intensive care units. Sepsis-related deaths have been reported to account for 19.7% of all global deaths. However, no effective and specific therapeutic for clinical sepsis management is available due to the complex pathogenesis. Concurrently eliminating infections and restoring immune homeostasis are regarded as the core strategies to manage sepsis. Sophisticated nanoplatforms guided by supramolecular and medicinal chemistry, targeting infection and/or imbalanced immune responses, have emerged as potent tools to combat sepsis by supporting more accurate diagnosis and precision treatment. Nanoplatforms can overcome the barriers faced by clinical strategies, including delayed diagnosis, drug resistance and incapacity to manage immune disorders. Here, we present a comprehensive review highlighting the pathogenetic characteristics of sepsis and future therapeutic concepts, summarizing the progress of these well-designed nanoplatforms in sepsis management and discussing the ongoing challenges and perspectives regarding future potential therapies. Based on these state-of-the-art studies, this review will advance multidisciplinary collaboration and drive clinical translation to remedy sepsis.

Assembly of Hexagonal Column Interpenetrated Spheres from Plant Polyphenol/Cationic Surfactants and Their Application as Antimicrobial Molecular Banks

Microbial infections has become a great threat to human health and one of the main risks arises from direct contact with the surfaces contaminated by pathogenic microbes. Developing long-lasting antimicrobial materials becomes an urgent need. Herein, a kind of hexagonal column interpenetrated spheres (HCISs) are fabricated by non-covalent assembly of plant gallic acid with quaternary ammonium surfactants. Different from one-time burst release of conventional antimicrobial agents, the HCIS acts like a "antimicrobial molecular bank" and releases the antimicrobial ingredients in a multistage way, leading to long-lasting antimicrobial performance. Taking advantage of strong hydrophobicity and adhesion, HCISs are applicable to various substrates and endowed with anti-water washing property, thus showing high in vitro antimicrobial efficiency ( > 99 %) even after being used for 10 cycles. Meanwhile, HCISs exhibit broad-spectrum antimicrobial activity against bacteria and fungi, and have good biocompatibility with mammalian cells. Such a low-cost and portable long-lasting antimicrobial agent meets the growing anti-infection demand in public spaces.

Recent Strategies to Develop Innovative Photosensitizers for Enhanced Photodynamic Therapy

This review presents a robust strategy to design photosensitizers (PSs) for various species. Photodynamic therapy (PDT) is a photochemical-based treatment approach that involves the use of light combined with a light-activated chemical, referred to as a PS. Attractively, PDT is one of the alternatives to conventional cancer treatment due to its noninvasive nature, high cure rates, and low side effects. PSs play an important factor in photoinduced reactive oxygen species (ROS) generation. Although the concept of photosensitizer-based photodynamic therapy has been widely adopted for clinical trials and bioimaging, until now, to our surprise, there has been no relevant review article on rational designs of organic PSs for PDT. Furthermore, most of published review articles in PDT focused on nanomaterials and nanotechnology based on traditional PSs. Therefore, this review aimed at reporting recent strategies to develop innovative organic photosensitizers for enhanced photodynamic therapy, with each example described in detail instead of providing only a general overview, as is typically done in previous reviews of PDT, to provide intuitive, vivid, and specific insights to the readers.

Additive Production of a Material Based on an Acrylic Polymer with a Nanoscale Layer of Zno Nanorods Deposited Using a Direct Current Magnetron Discharge: Morphology, Photoconversion Properties, and Biosafety

On the basis of a direct current magnetron, a technology has been developed for producing nanoscale-oriented nanorods from zinc oxide on an acrylic polymer. The technology makes it possible to achieve different filling of the surface with zinc oxide nanorods. The nanorods is partially fused into the polymer; the cross section of the nanorods is rather close to an elongated ellipse. It is shown that, with intense abrasion, no delamination of the nanorods from the acrylic polymer is observed. The zinc oxide nanorods abrades together with the acrylic polymer. Zinc oxide nanorods luminesces with the wavelength most preferable for the process of photosynthesis in higher plants. It was shown that plants grown under the obtained material grow faster and gain biomass faster than the control group. In addition, it was found that on surfaces containing zinc oxide nanorods, a more intense formation of such reactive oxygen species as hydrogen peroxide and hydroxyl radical is observed. Intensive formation of long-lived, active forms of the protein is observed on the zinc oxide coating. The formation of 8-oxoguanine in DNA in vitro on a zinc oxide coating was shown using ELISA method. It was found that the multiplication of microorganisms on the developed material is significantly hampered. At the same time, eukaryotic cells of animals grow and develop without hindrance. Thus, the material we have obtained can be used in photonics (photoconversion material for greenhouses, housings for LEDs), and it is also an affordable and non-toxic nanomaterial for creating antibacterial coatings.

Host Defense Peptide-Mimicking Polymers and Polymeric-Brush-Tethered Host Defense Peptides: Recent Developments, Limitations, and Potential Success

Amphiphilic antimicrobial polymers have attracted considerable interest as structural mimics of host defense peptides (HDPs) that provide a broad spectrum of activity and do not induce bacterial-drug resistance. Likewise, surface engineered polymeric-brush-tethered HDP is considered a promising coating strategy that prevents infections and endows implantable materials and medical devices with antifouling and antibacterial properties. While each strategy takes a different approach, both aim to circumvent limitations of HDPs, enhance physicochemical properties, therapeutic performance, and enable solutions to unmet therapeutic needs. In this review, we discuss the recent advances in each approach, spotlight the fundamental principles, describe current developments with examples, discuss benefits and limitations, and highlight potential success. The review intends to summarize our knowledge in this research area and stimulate further work on antimicrobial polymers and functionalized polymeric biomaterials as strategies to fight infectious diseases.