Dual-Single-Atom Tailoring with Bifunctional Integration for High-Performance CO2 Photoreduction

Functionalized MOF-Based Photocatalysts for CO2 Reduction

Metal-organic frameworks (MOFs) materials have become a research forefront in the field of photocatalytic CO₂ reduction attributed to their ultra-high specific surface area, adjustable structure, and abundant catalytic active sites. Particularly, MOFs can be facilely tuned to match CO₂ photoreduction by utilizing post-modification of metal nodes, functionalization of organic linkers, and combination with other active materials. Herein, the recent advances in the construction strategy of MOF-based photocatalysts materials for CO₂ reduction are highlighted. Some systematic modification strategies on MOF-based photocatalysts are also discussed, such as modification of metal sites and organic ligands, construction of heterojunction, introduction of single/dual-atom, and strain engineering. Finally, the future development directions of MOF-based photocatalysts in the field of CO₂ reduction are presented.

Defect Engineering Modulated Iron Single Atoms with Assist of Layered Clay for Enhanced Advanced Oxidation Processes

Single-atom catalysts (SACs) feature maximum atomic utilization efficiency; however, the loading amount, dispersibility, synthesis cost, and regulation of the electronic structure are factors that need to be considered in water treatment. In this study, kaolinite, a natural layered clay mineral, is applied as the support for g-C₃ N₄ and single Fe atoms (FeSA-NGK). The FeSA-NGK composite exhibits an impressive degradation performance toward the target pollutant (>98% degradation rate in 10 min), and catalytic stability across consecutive runs (90% reactivity maintained after three runs in a fluidized-bed catalytic unit) under peroxymonosulfate (PMS)/visible light (Vis) synergetic system. The introduction of kaolinite promotes the loading amount of single Fe atoms (2.57 wt.%), which is a 14.2% increase compared to using a bare catalyst without kaolinite, and improved the concentration of N vacancies, thereby optimizing the regulation of the electronic structure of the single Fe atoms. It is discovered that the single Fe atoms successfully occupied five coordinated N atoms and combined with a neighboring N vacancy. Consequently, this regulated the local electronic structure of single Fe atoms, which drives the electrons of N atoms to accumulate on the Fe centers. This study opens an avenue for the design of clay-based SACs for water purification.

Regulating the Coordination Environment of Mesopore-Confined Single Atoms from Metalloprotein-MOFs for Highly Efficient Biocatalysis

Single-atom catalysts (SACs) exhibit unparalleled atomic utilization and catalytic efficiency, yet it is challenging to modulate SACs with highly dispersed single-atoms, mesopores, and well-regulated coordination environment simultaneously and ultimately maximize their catalytic efficiency. Here, a generalized strategy to construct highly active ferric-centered SACs (Fe-SACs) is developed successfully via a biomineralization strategy that enables the homogeneous encapsulation of metalloproteins within metal-organic frameworks (MOFs) followed by pyrolysis. The results demonstrate that the constructed metalloprotein-MOF-templated Fe-SACs achieve up to 23-fold and 47-fold higher activity compared to those using metal ions as the single-atom source and those with large mesopores induced by Zn evaporation, respectively, as well as up to a 25-fold and 1900-fold higher catalytic efficiency compared to natural enzymes and natural-enzyme-immobilized MOFs. Furthermore, this strategy can be generalized to a variety of metal-containing metalloproteins and enzymes. The enhanced catalytic activity of Fe-SACs benefits from the highly dispersed atoms, mesopores, as well as the regulated coordination environment of single-atom active sites induced by metalloproteins. Furthermore, the developed Fe-SACs act as an excellent and effective therapeutic platform for suppressing tumor cell growth. This work advances the development of highly efficient SACs using metalloproteins-MOFs as a template with diverse biotechnological applications.

Carbon Dots Mediated In Situ Confined Growth of Bi Clusters on g-C3 N4 Nanomeshes for Boosting Plasma-Assisted Photoreduction of CO2

Synthesis of high-efficiency, cost-effective, and stable photocatalysts has long been a priority for sustainable photocatalytic CO₂ reduction reactions (CRR), given its importance in achieving carbon neutrality goals under the new development philosophy. Fundamentally, the sluggish interface charge transportation and poor selectivity of products remain a challenge in the CRR progress. Herein, this work unveils a synergistic effect between high-density monodispersed Bi/carbon dots (CDs) and ultrathin graphite phase carbon nitride (g-C₃ N₄ ) nanomeshes for plasma-assisted photocatalytic CRR. The optimal g-C₃ N₄ /Bi/CDs heterojunction displays a high selectivity of 98% for CO production with a yield up to 22.7 µmol g^-1 without any sacrificial agent. The in situ confined growth of plasmonic Bi clusters favors the production of more hot carriers and improves the conductivity of g-C₃ N₄ . Meanwhile, a built-in electric field driving force modulates the directional injection photogenerated holes from plasmonic Bi clusters and g-C₃ N₄ photosensitive units to adjacent CDs reservoirs, thus promoting the rapid separation and oriented transfer in the CRR process. This work sheds light on the mechanism of plasma-assisted photocatalytic CRR and provides a pathway for designing highly efficient plasma-involved photocatalysts.

Recent Progress of Diatomic Catalysts: General Design Fundamentals and Diversified Catalytic Applications

In recent years, some experiments and theoretical work have pointed out that diatomic catalysts not only retain the advantages of monoatomic catalysts, but also introduce a variety of interactions, which exceed the theoretical limit of catalytic performance and can be applied to many catalytic fields. Here, the interaction between adjacent metal atoms in diatomic catalysts is elaborated: synergistic effect, spacing enhancement effect (geometric effect), and electronic effect. With regard to the classification and characterization of various new diatomic catalysts, diatomic catalysts are classified into four categories: heteronuclear/homonuclear, with/without carbon carriers, and their characterization measures are introduced and explained in detail. In the aspect of preparation of diatomic catalysts, the widely used atomic layer deposition method, metal-organic framework derivative method, and simple ball milling method are introduced, with emphasis on the formation mechanism of diatomic catalysts. Finally, the effective control strategies of four diatomic catalysts and the key applications of diatomic catalysts in electrocatalysis, photocatalysis, thermal catalysis, and other catalytic fields are given.

Phosphorus Tailors the d-Band Center of Copper Atomic Sites for Efficient CO2 Photoreduction under Visible-Light Irradiation

Photoreduction of CO₂ into solar fuels has received great interest, but suffers from low catalytic efficiency and poor selectivity. Herein, two single-Cu-atom catalysts with unique Cu configurations in phosphorus-doped carbon nitride (PCN), namely, Cu₁ N₃ @PCN and Cu₁ P₃ @PCN were fabricated via selective phosphidation, and tested in visible light-driven CO₂ reduction by H₂ O without sacrificial agents. Cu₁ N₃ @PCN was exclusively active for CO production with a rate of 49.8 μmol_CO  g_cat ^-1  h^-1 , outperforming most polymeric carbon nitride (C₃ N₄ ) based catalysts, while Cu₁ P₃ @PCN preferably yielded H₂ . Experimental and theoretical analysis suggested that doping P in C₃ N₄ by replacing a corner C atom upshifted the d-band center of Cu in Cu₁ N₃ @PCN close to the Fermi level, which boosted the adsorption and activation of CO₂ on Cu₁ N₃ , making Cu₁ N₃ @PCN efficiently convert CO₂ to CO. In contrast, Cu₁ P₃ @PCN with a much lower Cu 3d electron energy exhibited negligible CO₂ adsorption, thereby preferring H₂ formation via photocatalytic H₂ O splitting.

Engineering Single-Atom Active Sites on Covalent Organic Frameworks for Boosting CO2 Photoreduction

Solar carbon dioxide (CO₂) conversion is an emerging solution to meet the challenges of sustainable energy systems and environmental/climate concerns. However, the construction of isolated active sites not only influences catalytic activity but also limits the understanding of the structure-catalyst relationship of CO₂ reduction. Herein, we develop a universal synthetic protocol to fabricate different single-atom metal sites (e.g., Fe, Co, Ni, Zn, Cu, Mn, and Ru) anchored on the triazine-based covalent organic framework (SAS/Tr-COF) backbone with the bridging structure of metal-nitrogen-chlorine for high-performance catalytic CO₂ reduction. Remarkably, the as-synthesized Fe SAS/Tr-COF as a representative catalyst achieved an impressive CO generation rate as high as 980.3 μmol g^-1 h^-1 and a selectivity of 96.4%, over approximately 26 times higher than that of the pristine Tr-COF under visible light irradiation. From X-ray absorption fine structure analysis and density functional theory calculations, the superior photocatalytic performance is attributed to the synergic effect of atomically dispersed metal sites and Tr-COF host, decreasing the reaction energy barriers for the formation of *COOH intermediates and promoting CO₂ adsorption and activation as well as CO desorption. This work not only affords rational design of state-of-the-art catalysts at the molecular level but also provides in-depth insights for efficient CO₂ conversion.

Isolating Single and Few Atoms for Enhanced Catalysis

Atomically dispersed metal catalysts have triggered great interest in the field of catalysis owing to their unique features. Isolated single or few metal atoms can be anchored on substrates via chemical bonding or space confinement to maximize atom utilization efficiency. The key challenge lies in precisely regulating the geometric and electronic structure of the active metal centers, thus significantly influencing the catalytic properties. Although several reviews have been published on the preparation, characterization, and application of single-atom catalysts (SACs), the comprehensive understanding of SACs, dual-atom catalysts (DACs), and atomic clusters has never been systematically summarized. Here, recent advances in the engineering of local environments of state-of-the-art SACs, DACs, and atomic clusters for enhanced catalytic performance are highlighted. Firstly, various synthesis approaches for SACs, DACs, and atomic clusters are presented. Then, special attention is focused on the elucidation of local environments in terms of electronic state and coordination structure. Furthermore, a comprehensive summary of isolated single and few atoms for the applications of thermocatalysis, electrocatalysis, and photocatalysis is provided. Finally, the potential challenges and future opportunities in this emerging field are presented. This review will pave the way to regulate the microenvironment of the active site for boosting catalytic processes.

Recent Advances of Doping and Surface Modifying Carbon Nitride with Characterization Techniques

As a non-metallic organic semiconductor photocatalyst, graphitic carbon nitride (g–C3N4, CN) has become a research hotspot due to its excellent performance in organic degradation, CO2 reduction and water splitting to produce hydrogen. However, the high recombination rate of electron-hole pairs, low specific surface area and weak light absorption of bulk CN synthesized by the traditional one-step thermal polymerization method seriously restrict its photocatalytic performance and practical application. To enhance the photocatalytic performance of CN, doping and surface modification strategies are usually employed to tune the band gap of carbon nitride and improve the separation of carriers. In this paper, the research progress of different methods to modify CN in recent years is introduced, and the mechanisms of improving the photocatalytic performance are mainly analyzed. Typical modification methods are mainly divided into metal doping, non-metal doping, co-doping and surface-functionalized modification. Some characterization methods that can analyze the doping state and surface modification are also discussed as examples. Finally, the difficulties that need to be addressed through modified CN photocatalysts and the directions for future research are pointed out.

Synergies of Adjacent Sites in Atomically Dispersed Ruthenium toward Achieving Stable Hydrogen Evolution

It is a challenge to fabricate atomically dispersed metal clusters in polymeric carbon nitride (PCN) for durable photocatalytic reactions owing to the thermodynamic stability limitation. Herein, atomically dispersed Ru clusters are implanted into the PCN skeleton matrix based on an ionic diffusion and coordination (IDC) strategy, the stability of which is improved owing to the robust Ru-N bonds in the formed RuN₄ and RuN₃ configurations. Additionally, RuN₄ and RuN₃ as charge transport bridges between two adjacent melon strands efficaciously conquer hydrogen bond restriction in the skeleton to facilitate the in-plane mobility and separation of charge carriers. Moreover, the synergistic effect of adjacent Ru atoms is triggered on the assembled RuN₃-RuN₄ and RuN₃-RuN₃ in the atomically dispersed Ru clusters to significantly decrease hydrogen adsorption energy. As a result, the optimal PCN-Ru photocatalyst achieves nearly 6 times higher than the photocatalytic hydrogen evolution (PHE) rate of the Pt/PCN benchmark and maintains the long-term stable running for 104 h of 26 cycles; its overall PHE performance is far superior to the most of single atoms supported on g-C₃N₄ photocatalysts reported. The findings here gain new insight into the preparation strategy, structure configuration, and reaction mechanism for atomically dispersed metal clusters supported on PCN, which further stimulates the intensive investigations toward developing more efficient and stable PCN-like photocatalytic materials.

Homogeneity of Supported Single-Atom Active Sites Boosting the Selective Catalytic Transformations

Selective conversion of specific functional groups to desired products is highly important but still challenging in industrial catalytic processes. The adsorption state of surface species is the key factor in modulating the conversion of functional groups, which is correspondingly determined by the uniformity of active sites. However, the non-identical number of metal atoms, geometric shape, and morphology of conventional nanometer-sized metal particles/clusters normally lead to the non-uniform active sites with diverse geometric configurations and local coordination environments, which causes the distinct adsorption states of surface species. Hence, it is highly desired to modulate the homogeneity of the active sites so that the catalytic transformations can be better confined to the desired direction. In this review, the construction strategies and characterization techniques of the uniform active sites that are atomically dispersed on various supports are examined. In particular, their unique behavior in boosting the catalytic performance in various chemical transformations is discussed, including selective hydrogenation, selective oxidation, Suzuki coupling, and other catalytic reactions. In addition, the dynamic evolution of the active sites under reaction conditions and the industrial utilization of the single-atom catalysts are highlighted. Finally, the current challenges and frontiers are identified, and the perspectives on this flourishing field is provided.

Site-Specific Electron-Driving Observations of CO2 -to-CH4 Photoreduction on Co-Doped CeO2 /Crystalline Carbon Nitride S-Scheme Heterojunctions

Photoexcited dynamic modulation, maximizing the effective utilization of photoinduced electron-hole pairs, dominates the multiple electrons-involving reduction pathways for terminal CH₄ evolution during CO₂ photoreduction. Yet, the site-specific regulation of directional charge transfer by modification of an S-scheme heterojunction has seldom been discussed. Herein, an atomic-level tailoring strategy by anchoring single-atomic Co into CeO₂ co-catalyst rather than carbon nitride supports, which can selectively favor CO₂ -to-CH₄ photoreduction, is reported. Through in situ dynamic tracking investigations, this study identifies that surface Co-embedded bimetallic CeCo conjunction is the key feature driving a strong interconnection of dynamical charge states through S-scheme heterojunctions. The Co-embedded modification into CeO₂ co-catalysts is demonstrated to have a critical effect on directional charge control, accelerating the driving of electrons from the carbon nitride donations to site-specific Co hubs, which thereby promotes electronic transferability for electrons-involving CH₄ formation. As a result, an unprecedented CH₄ yield (181.7 µmol g^-1 ) is obtained with a high turnover number (411.4) through a fully gas-solid reaction, demonstrating its potential toward targeted CH₄ formation without adding any sacrificial agent.

Single-Atom Catalysts (SACs) for Photocatalytic CO2 Reduction with H2 O: Activity, Product Selectivity, Stability, and Surface Chemistry

In recent years, single-atom catalysts (SACs) have attracted the interest of researchers owing to their suitability for various catalytic applications. For instance, their optoelectronic features, site-specific activity, and cost-effectiveness make SACs ideal for photocatalytic CO₂ reduction. The activity, product selectivity, and photostability of SACs depend on various factors such as the nature of the metal/support material, the interaction between the metal atoms and support, light-harvesting ability, charge separation behavior, CO₂ adsorption ability, active sites, and defects. Consequently, it is necessary to investigate these factors in depth to elucidate the working principle(s) of SACs for catalytic applications. Herein, the recent progress in the development of SACs for photocatalytic CO₂ reduction with H₂ O is reviewed. First, a brief overview of CO₂ photoreduction and SACs for CO₂ conversion is provided. Several synthesis strategies and useful techniques for characterizing SACs employed in heterogeneous catalysis are then described. Next, the challenges of SACs for photocatalytic CO₂ reduction and related optimization strategies, in terms of activity, product selectivity, and stability, are explored. The progress in the development of noble metal- and transition metal-based SACs and dual-SACs for photocatalytic CO₂ reduction is discussed. Finally, the prospects of SACs for CO₂ reduction are considered.

Carbon Nitride Photocatalysts with Integrated Oxidation and Reduction Atomic Active Centers for Improved CO2 Conversion

Single-atom active-site catalysts have attracted significant attention in the field of photocatalytic CO₂ conversion. However, designing active sites for CO₂ reduction and H₂ O oxidation simultaneously on a photocatalyst and combining the corresponding half-reaction in a photocatalytic system is still difficult. Here, we synthesized a bimetallic single-atom active-site photocatalyst with two compatible active centers of Mn and Co on carbon nitride (Mn₁ Co₁ /CN). Our experimental results and density functional theory calculations showed that the active center of Mn promotes H₂ O oxidation by accumulating photogenerated holes. In addition, the active center of Co promotes CO₂ activation by increasing the bond length and bond angle of CO₂ molecules. Benefiting from the synergistic effect of the atomic active centers, the synthesized Mn₁ Co₁ /CN exhibited a CO production rate of 47 μmol g^-1  h^-1 , which is significantly higher than that of the corresponding single-metal active-site photocatalyst.

Progress in Development of Photocatalytic Processes for Synthesis of Fuels and Organic Compounds under Outdoor Solar Light

With photovoltaics becoming a mature, commercially feasible technology, society is willing to allocate resources for developing and deploying new technologies based on using solar light. Analysis of projects supported by the European Commission in the past decade indicates exponential growth of funding to photocatalytic (PC) and photoelectrocatalytic (PEC) technologies that aim either at technology readiness levels (TRLs) TRL 1-3 or TRL > 3, with more than 75 Mio€ allocated from the year 2019 onward. This review provides a summary of PC and PEC processes for the synthesis of bulk commodities such as solvents and fuels, as well as chemicals for niche applications. An overview of photoreactors for photocatalysis on a larger scale is provided. The review rounds off with the summary of reactions performed at lab scale under natural outdoor solar light to illustrate conceptual opportunities offered by solar-driven chemistry beyond the reduction of CO₂ and water splitting. The authors offer their vision of the impact of this area of research on society and the economy.

Few-layer porous carbon nitride anchoring Co and Ni with charge transfer mechanism for photocatalytic CO2 reduction

The low specific surface area and low charge transfer efficiency of conventional graphite carbon nitride (g-C₃N₄) are the main obstacles to its application in photocatalytic CO₂ reduction. In this paper, graphite carbon nitride was protonated by phosphoric acid (H₃PO₄), and a new few-layer porous carbon nitride was prepared by intercalation polymerization with doping bimetal in the cavity of g-C₃N₄. Under visible light irradiation, the CO formation rate of Co/Ni co-doped g-C₃N₄ can reach 13.55 μmol g^-1 h^-1, which was 3.9 times higher than that of g-C₃N₄ (3.49 μmol g^-1 h^-1). The density functional theory (DFT) calculations showed that the addition of Co and Ni in the cavity of g-C₃N₄ can induce bimetallic synergistic regulation of the electronic structure, thus improving the separation efficiency of charges and visible light capture ability of g-C₃N₄. Our work has great reference value for designing and synthesizing novel bimetallic co-doped g-C₃N₄ photocatalytic materials.

Metal-metal interactions in correlated single-atom catalysts

Single-atom catalysts (SACs) include a promising family of electrocatalysts with unique geometric structures. Beyond conventional ones with fully isolated metal sites, an emerging class of catalysts with the adjacent metal single atoms exhibiting intersite metal-metal interactions appear in recent years and can be denoted as correlated SACs (C-SACs). This type of catalysts provides more opportunities to achieve substantial structural modification and performance enhancement toward a wider range of electrocatalytic applications. On the basis of a clear identification of metal-metal interactions, this review critically examines the recent research progress in C-SACs. It shows that the control of metal-metal interactions enables regulation of atomic structure, local coordination, and electronic properties of metal single atoms, which facilitate the modulation of electrocatalytic behavior of C-SACs. Last, we outline directions for future work in the design and development of C-SACs, which is indispensable for creating high-performing new SAC architectures.

COF-5/CoAl-LDH Nanocomposite Heterojunction for Enhanced Visible-Light-Driven CO2 Reduction

Photocatalytic conversion of CO₂ into value-added chemical fuels is an attractive route to mitigate global warming and the energy crisis. Reasonable design of optical properties and electronic behavior of the photocatalyst are essential to improve their catalytic activity. Herein, the 1D/2D heterojunction by direct in-situ synthesis of the covalent organic framework (COF)-5 colloid on the surface of CoAl layered double hydroxide (LDH) was used as the prospective photocatalyst for CO₂ reduction. COF-5/CoAl-LDH nanocomposite achieved 265.4 μmol g^-1 of CO with 94.6 % selectivity over CH₄ evolution in 5 h under visible light irradiation, which was 4.8 and 2.3 times higher than those of COF-5 colloid and CoAl-LDH, respectively. The enhanced catalytic activity was derived from the increased visible-light activity and the construction of type II-2 heterojunction, which greatly optimized visible light harvesting and accelerated the efficient separation of the photoinduced holes and electrons. This work paves the way for rational design of heterojunction catalysts in photocatalytic CO₂ reduction.

Synergy between Palladium Single Atoms and Nanoparticles via Hydrogen Spillover for Enhancing CO2 Photoreduction to CH4

Selective photoreduction of carbon dioxide (CO₂ ) into carbon-neutral fuels such as methane (CH₄ ) is extremely desirable but remains a challenge since sluggish multiple proton-electron coupling transfer and various C₁ intermediates are involved. Herein, a synergistic function between single Pd atoms (Pd₁ ) and Pd nanoparticles (Pd_NPs ) on graphitic carbon nitride (C₃ N₄ ) for photocatalytic CO₂ methanation is presented. The catalyst achieves a high selectivity of 97.8% for CH₄ production with a yield of 20.3 µmol g_cat. ^-1 h^-1 in pure water. Mechanistic studies revealed that Pd₁ sites activated CO₂ , while Pd_NPs sites boosted water (H₂ O) dissociation for increased H* coverage. The H* produced by Pd_NPs migrate to the Pd₁ sites to promote multiple proton-electron coupling transfer via hydrogen spillover. Moreover, the adjacent Pd₁ and Pd_NPs effectively stabilized intermediates such as *CHO, thereby favoring the pathway for CH₄ production. This work provides a new perspective into the development of selective photocatalytic CO₂ conversion through the artful design of synergistic catalytic sites.

2D CeO2 and a Partially Phosphated 2D Ni-Based Metal-Organic Framework Formed an S-Scheme Heterojunction for Efficient Photocatalytic Hydrogen Evolution

Here, an S-scheme heterojunction was constructed on the basis of the modification of a Ni-based metal-organic framework (Ni-MOF) by different in situ treatment strategies. First, NiS₂, NiO, and Ni₂P were derived in situ on the surface of Ni-MOF through surface sulfonation, oxidation, and phosphatizing treatments. They can efficiently accept the electrons from the conduction band of Ni-MOF as the trap centers, thus improving the hydrogen production activity. Additionally, phosphatizing makes the electronegativity of Ni-MOF/P stronger than that of the original Ni-MOF, which can enhance the absorption of protons, thus promoting the hydrogen evolution reaction. Next, the S-scheme heterojunction was successfully built by the coupling of 2D CeO₂ with Ni-MOF/P. The maximum hydrogen production rate of the hybrid catalyst (6.337 mmol g^-1 h^-1) is 14.18 times that of the untreated Ni-MOF due to the full utilization of photo-induced electrons. Finally, the probable hydrogen evolution mechanism was proposed by analyzing a series of characterization results and by the density functional theory (DFT) calculation.