Aerobic Oxidative Coupling of o-Xylene: Discovery of 2-Fluoropyridine as a Ligand to Support Selective Pd-Catalyzed C-H Functionalization

Cobalt-promoted dimerization of aminoquinoline benzamides

A method for aminoquinoline-directed, cobalt-promoted dimerization of benzamides has been developed. Reactions proceed in ethanol solvent in the presence of Mn(OAc)2 cocatalyst and Na2CO3 base and use oxygen as a terminal oxidant. Bromo, iodo, nitro, ether, and ester moieties are compatible with the reaction conditions. Cross-coupling of electronically dissimilar aminoquinoline benzamides proceeds with modest yields and selectivities.

Direct C-H arene homocoupling over gold nanoparticles supported on metal oxides

The direct CH/CH bond coupling of dimethyl phthalate was performed successfully over supported gold nanoparticle catalysts. Gold on reducible metal oxides, such as Co3 O4 , and on inert oxides that have an oxygen-releasing capacity, such as ZrO2 , showed the highest catalytic activity for the production of biphenyl tetracarboxylate using O2 as the sole oxidant. Supported Pd(OH)2 also catalyzed the reaction, but the catalytic activity was inferior to that of gold. Moreover, the gold catalysts exhibited excellent regioselectivity for the synthesis of valuable 3,3',4,4'-tetrasubstituted biphenyls by coupling with each other at the 4-position without the need for additional ligands. Gold catalysts also promoted the oxidative homocoupling of arenes including o-xylene to give symmetrical biaryls with high regioselectivity. X-ray absorption fine structure measurements revealed that the catalytically active species was Au(0) and that the lattice oxygen of Co3 O4 played an important role in the gold-catalyzed oxidative coupling. The results of the kinetic studies were consistent with an electrophilic aromatic substitution pathway. Regioselectivity is not controlled by directing groups or the electronic character of the substituents but by steric hindrance, which suggests that gold nanoparticles not only catalyze the oxidative coupling but also act as bulky ligands to control the regioselectivity.

Pd-catalyzed aerobic oxidative coupling of arenes: evidence for transmetalation between two Pd(II)-aryl intermediates

Pd-catalyzed aerobic oxidative coupling of arenes provides efficient access to biaryl compounds. The biaryl product forms via C-H activation of two arenes to afford a Pd(II)ArAr' intermediate, which then undergoes C-C reductive elimination. The key Pd(II)ArAr' intermediate could form via a "monometallic" pathway involving sequential C-H activation at a single Pd(II) center, or via a "bimetallic" pathway involving parallel C-H activation at separate Pd(II) centers, followed by a transmetalation step between two Pd(II)-aryl intermediates. Here, we investigate the oxidative coupling of o-xylene catalyzed by a PdX2/2-fluoropyridine catalyst (X = trifluoroacetate, acetate). Kinetic studies, H/D exchange experiments, and kinetic isotope effects provide clear support for a bimetallic/transmetalation mechanism.

Palladium catalysed cross-dehydrogenative-coupling of 1,3,5-trialkoxybenzenes with simple arenes

The cross-dehydrogenative coupling of two arene C–H positions is reported, generating multi-ortho-substituted biaryls under Pd catalysis.

2-Hydroxy-1,10-phenanthroline vs 1,10-phenanthroline: significant ligand acceleration effects in the palladium-catalyzed oxidative Heck reaction of arenes

A series of bidentate monoanionic nitrogen ligands were designed and applied in the Pd-catalyzed oxidative Heck reaction of arenes with alkenes. Significant ligand-accelerated effects were observed, and direct C-H functionalized products were formed in high yields with meta-selectivity.

Platinum-catalyzed C-H arylation of simple arenes

This report describes the Na2PtCl4 catalyzed C-H arylation of arene substrates with diaryliodonium salts. The site selectivity of these reactions is predominantly controlled by steric factors. Remarkably, Na2PtCl4-catalyzed naphthalene arylation proceeds with opposite site selectivity compared to that obtained with Na2PdCl4 as the catalyst. Preliminary mechanistic studies provide evidence for a Pt(II)/Pt(IV) catalytic cycle involving rate-limiting C-C bond-forming reductive elimination.

Developing ligands for palladium(II)-catalyzed C-H functionalization: intimate dialogue between ligand and substrate

Homogeneous transition-metal-catalyzed reactions are indispensable to all facets of modern chemical synthesis. It is thus difficult to imagine that for much of the early 20th century, the reactivity and selectivity of all known homogeneous metal catalysts paled in comparison to their heterogeneous and biological counterparts. In the intervening decades, advances in ligand design bridged this divide, such that today some of the most demanding bond-forming events are mediated by ligand-supported homogeneous metal species. While ligand design has propelled many areas of homogeneous catalysis, in the field of Pd(II)-catalyzed C-H functionalization, suitable ligand scaffolds are lacking, which has hampered the development of broadly practical transformations based on C-H functionalization logic. In this Perspective, we offer an account of our research employing three ligand scaffolds, mono-N-protected amino acids, 2,6-disubstituted pyridines, and 2,2'-bipyridines, to address challenges posed by several synthetically versatile substrate classes. Drawing on this work, we discuss principles of ligand design, such as the need to match a ligand to a particular substrate class, and how ligand traits such as tunability and modularity can be advantageous in reaction discovery.

Aerobic dehydrogenation of cyclohexanone to cyclohexenone catalyzed by Pd(DMSO)2(TFA)2: evidence for ligand-controlled chemoselectivity

The dehydrogenation of cyclohexanones affords cyclohexenones or phenols via removal of 1 or 2 equiv of H2, respectively. We recently reported several Pd(II) catalyst systems that effect aerobic dehydrogenation of cyclohexanones with different product selectivities. Pd(DMSO)2(TFA)2 is unique in its high chemoselectivity for the conversion of cyclohexanones to cyclohexenones, without promoting subsequent dehydrogenation of cyclohexenones to phenols. Kinetic and mechanistic studies of these reactions reveal the key role of the dimethylsulfoxide (DMSO) ligand in controlling this chemoselectivity. DMSO has minimal kinetic influence on the rate of Pd(TFA)2-catalyzed dehydrogenation of cyclohexanone to cyclohexenone, while it strongly inhibits the second dehydrogenation step, conversion of cyclohexenone to phenol. These contrasting kinetic effects of DMSO provide the basis for chemoselective formation of cyclohexenones.

Palladium-catalyzed arylation of simple arenes with iodonium salts

The development of an arylation protocol for simple arenes with diaryliodonium salts using the Herrmann-Beller palladacycle catalyst is reported. The reaction takes simple aromatic feedstocks and creates valuable biaryls for use in all sectors of the chemical industry.

Catalyst-controlled regioselectivity in the synthesis of branched conjugated dienes via aerobic oxidative Heck reactions

Pd-catalyzed aerobic oxidative coupling of vinylboronic acids and electronically unbiased alkyl olefins provides regioselective access to 1,3-disubstituted conjugated dienes. Catalyst-controlled regioselectivity is achieved by using 2,9-dimethylphenanthroline as a ligand. The observed regioselectivity is opposite to that observed from a traditional (nonoxidative) Heck reaction between a vinyl bromide and an alkene. DFT computational studies reveal that steric effects of the 2,9-dimethylphenanthroline ligand promote C-C bond formation at the internal position of the alkene.

Overcoming the "oxidant problem": strategies to use O2 as the oxidant in organometallic C-H oxidation reactions catalyzed by Pd (and Cu)

Oxidation reactions are key transformations in organic chemistry because they can increase chemical complexity and incorporate heteroatom substituents into carbon-based molecules. This principle is manifested in the conversion of petrochemical feedstocks into commodity chemicals and in the synthesis of fine chemicals, pharmaceuticals, and other complex organic molecules. The utility and function of these molecules correlate directly with the presence and specific placement of oxygen and nitrogen heteroatoms and other functional groups within the molecules. Methods for selective oxidation of C-H bonds have expanded significantly over the past decade, and their role in the synthesis of organic chemicals will continue to increase. Our group's contributions to this field are linked to our broader interest in the development and mechanistic understanding of aerobic oxidation reactions. Molecular oxygen (O(2)) is the ideal oxidant. Its low cost and lack of toxic byproducts make it a highly appealing reagent that can address key "green chemistry" priorities in industry. With strong economic and environmental incentives to use O(2), the commmodity chemicals industry often uses aerobic oxidation reactions. In contrast, O(2) is seldom used to prepare more-complex smaller-volume chemicals, a limitation that reflects, in part, the limited synthetic scope and utility of existing aerobic reactions. Pd-catalyzed reactions represent some of the most versatile methods for selective C-H oxidation, but they often require stoichiometric transition-metal or organic oxidants, such as Cu(II), Ag(I), or benzoquinone. This Account describes recent strategies that we have identified to use O(2) as the oxidant in these reactions. In Pd-catalyzed C-H oxidation reactions that form carbon-heteroatom bonds, the stoichiometric oxidant is often needed to promote difficult reductive elimination steps in the catalytic mechanism. To address this challenge, we have identified new ancillary ligands for Pd that promote reductive elimination, or replaced Pd with a Cu catalyst that undergoes facile reductive elimination from a Cu(III) intermediate. Both strategies have enabled O(2) to be used as the sole stoichiometric oxidant in the catalytic reactions. C-H oxidation reactions that form the product via β-hydride or C-C reductive elimination steps tend to be more amenable to the use of O(2). The use of new ancillary ligands has also overcome some of the limitations in these methods. Mechanistic studies are providing insights into some (but not yet all) of these advances in catalytic reactivity.

Controlling site selectivity in palladium-catalyzed C-H bond functionalization

Effective methodology to functionalize C-H bonds requires overcoming the key challenge of differentiating among the multitude of C-H bonds that are present in complex organic molecules. This Account focuses on our work over the past decade toward the development of site-selective Pd-catalyzed C-H functionalization reactions using the following approaches: substrate-based control over selectivity through the use of directing groups (approach 1), substrate control through the use of electronically activated substrates (approach 2), or catalyst-based control (approach 3). In our extensive exploration of the first approach, a number of selectivity trends have emerged for both sp(2) and sp(3) C-H functionalization reactions that hold true for a variety of transformations involving diverse directing groups. Functionalizations tend to occur at the less-hindered sp(2) C-H bond ortho to a directing group, at primary sp(3) C-H bonds that are β to a directing group, and, when multiple directing groups are present, at C-H sites proximal to the most basic directing group. Using approach 2, which exploits electronic biases within a substrate, our group has achieved C-2-selective arylation of indoles and pyrroles using diaryliodonium oxidants. The selectivity of these transformations is altered when the C-2 site of the heterocycle is blocked, leading to C-C bond formation at the C-3 position. While approach 3 (catalyst-based control) is still in its early stages of exploration, we have obtained exciting results demonstrating that site selectivity can be tuned by modifying the structure of the supporting ligands on the Pd catalyst. For example, by modulating the structure of N-N bidentate ligands, we have achieved exquisite levels of selectivity for arylation at the α site of naphthalene. Similarly, we have demonstrated that both the rate and site selectivity of arene acetoxylation depend on the ratio of pyridine (ligand) to Pd. Lastly, by switching the ligand on Pd from an acetate to a carbonate, we have reversed the site selectivity of a 1,3-dimethoxybenzene/benzo[h]quinoline coupling. In combination with a growing number of reports in the literature, these studies highlight a frontier of catalyst-based control of site-selectivity in the development of new C-H bond functionalization methodology.

Pyridine ligands as promoters in Pd(II/0)-catalyzed C-H olefination reactions

Commercially available pyridine ligands can significantly enhance the rate, yield, substrate scope, and site selectivity of arene C-H olefination (Fujiwara-Moritani) reactions. The use of a 1:1 ratio of Pd/pyridine proved critical to maximize reaction rates and yields.

Ligand-accelerated cross-coupling of C(sp2)-H bonds with arylboron reagents

A ligand-accelerated Pd(II)-catalyzed C(sp(2))-H/arylboron cross-coupling reaction of phenylacetic acid substrates is reported. Using Ac-Ile-OH as the ligand and Ag(2)CO(3) as the oxidant, a fast, high-yielding, operationally simple, and functional group-tolerant protocol has been developed for the cross-coupling of phenylacetic acid substrates with aryltrifluoroborates. This ligand scaffold has also been shown to improve catalysis using 1 atm O(2) as the sole reoxidant, which sheds light on the path forward in developing optimized ligands for aerobic C-H/arylboron cross-coupling.

Regiocontrolled aerobic oxidative coupling of indoles and benzene using Pd catalysts with 4,5-diazafluorene ligands

Palladium-catalyzed aerobic oxidative cross-couplings of indoles and benzene have been achieved by using 4,5-diazafluorene derivatives as ancillary ligands. Proper choice of the neutral and anionic ligands enables control over the reaction regioselectivity.

Synthesis of cyclic enones via direct palladium-catalyzed aerobic dehydrogenation of ketones

α,β-Unsaturated carbonyl compounds are versatile intermediates in the synthesis of pharmaceuticals and biologically active compounds. Here, we report the discovery and application of Pd(DMSO)(2)(TFA)(2) as a catalyst for direct dehydrogenation of cyclohexanones and other cyclic ketones to the corresponding enones, using O(2) as the oxidant. The substrate scope includes heterocyclic ketones and several natural-product precursors.

A general method for copper-catalyzed arene cross-dimerization

A general method for a highly regioselective copper-catalyzed cross-coupling of two aromatic compounds using iodine as an oxidant has been developed. The reactions involve an initial iodination of one arene followed by arylation of the most acidic C-H bond of the other coupling component. Cross-coupling of electron-rich arenes, electron-poor arenes, and five- and six-membered heterocycles is possible in many combinations. Typically, a 1/1.5 to 1/3 ratio of coupling components is used, in contrast to existing methodology that often employs a large excess of one of the arenes. Common functionalities such as ester, ketone, aldehyde, ether, nitrile, nitro, and amine are well-tolerated.

Palladium-catalyzed aerobic dehydrogenation of substituted cyclohexanones to phenols

Aromatic molecules are key constituents of many pharmaceuticals, electronic materials, and commodity plastics. The utility of these molecules directly reflects the identity and pattern of substituents on the aromatic ring. Here, we report a palladium(II) catalyst system, incorporating an unconventional ortho-dimethylaminopyridine ligand, for the conversion of substituted cyclohexanones to the corresponding phenols. The reaction proceeds via successive dehydrogenation of two saturated carbon-carbon bonds of the six-membered ring and uses molecular oxygen as the hydrogen acceptor. This reactivity demonstrates a versatile and efficient strategy for the synthesis of substituted aromatic molecules with fundamentally different selectivity constraints from the numerous known synthetic methods that rely on substitution of a preexisting aromatic ring.

Mechanistic studies of Wacker-type intramolecular aerobic oxidative amination of alkenes catalyzed by Pd(OAc)2/pyridine

Wacker-type oxidative cyclization reactions have been the subject of extensive research for several decades, but few systematic mechanistic studies of these reactions have been reported. The present study features experimental and DFT computational studies of Pd(OAc)(2)/pyridine-catalyzed intramolecular aerobic oxidative amination of alkenes. The data support a stepwise catalytic mechanism that consists of (1) steady-state formation of a Pd(II)-amidate-alkene chelate with release of 1 equiv of pyridine and AcOH from the catalyst center, (2) alkene insertion into a Pd-N bond, (3) reversible β-hydride elimination, (4) irreversible reductive elimination of AcOH, and (5) aerobic oxidation of palladium(0) to regenerate the active trans-Pd(OAc)(2)(py)(2) catalyst. Evidence is obtained for two energetically viable pathways for the key C-N bond-forming step, featuring a pyridine-ligated and a pyridine-dissociated Pd(II) species. Analysis of natural charges and bond lengths of the alkene-insertion transition state suggest that this reaction is best described as an intramolecular nucleophilic attack of the amidate ligand on the coordinated alkene.