Molecular engineering of DNA: molecular beacons

Molecular Beacon for Detection miRNA-21 as a Biomarker of Lung Cancer

Lung cancer (LC) is the leading cause of cancer-related death worldwide. Although the diagnosis and treatment of non-small cell lung cancer (NSCLC), which accounts for approximately 80% of LC cases, have greatly improved in the past decade, there is still an urgent need to find more sensitive and specific screening methods. Recently, new molecular biomarkers are emerging as potential non-invasive diagnostic agents to screen NSCLC, including multiple microRNAs (miRNAs) that show an unusual expression profile. Moreover, peripheral blood mononuclear cells’ (PBMCs) miRNA profile could be linked with NSCLC and used for diagnosis. We developed a molecular beacon (MB)-based miRNA detection strategy for NSCLC. Following PBMCs isolation and screening of the expression profile of a panel of miRNA by RT-qPCR, we designed a MB targeting of up-regulated miR-21-5p. This MB 21-5p was characterized by FRET-melting, CD, NMR and native PAGE, allowing the optimization of an in-situ approach involving miR-21-5p detection in PBMCs via MB. Data show the developed MB approach potential for miR-21-5p detection in PBMCs from clinical samples towards NSCLC.

Rapid Nucleic Acid Reaction Circuits for Point-Of-Care Diseases Diagnosis

An urgent need exists for a rapid, cost-effective, facile, and reliable nucleic acid assay for mass screening to control and prevent the spread of emerging pandemic diseases. This urgent need is not fully met by current diagnostic tools. In this review, we summarize the current state-of-the-art research in novel nucleic acid amplification and detection that could be applied to point-of-care (POC) diagnosis and mass screening of diseases. The critical technological breakthroughs will be discussed for their advantages and disadvantages. Finally, we will discuss the future challenges of developing nucleic acid-based POC diagnosis.

A designer DNA tetrahedron-based molecular beacon for tumor-related microRNA fluorescence imaging in living cells

A designer nanoprobe of tetrahedral DNA framework (TDF) combined with MB (termed TDFM nanoprobe) for the efficient fluorescence imaging of tumor-related miRNA-214 in living cells.

Optimizing locked nucleic acid modification in double-stranded biosensors for live single cell analysis

Double-stranded (ds) biosensors are homogeneous oligonucleotide probes for detection of nucleic acid sequences in biochemical assays and live cell imaging.

Engineering DNA on the Surface of Upconversion Nanoparticles for Bioanalysis and Therapeutics

Surface modification of inorganic nanomaterials with biomolecules has enabled the development of composites integrated with extensive properties. Lanthanide ion-doped upconversion nanoparticles (UCNPs) are one class of inorganic nanomaterials showing optical properties that convert photons of lower energy into higher energy. Additionally, DNA oligonucleotides have exhibited powerful capabilities for organizing various nanomaterials with versatile topological configurations. Through rational design and nanotechnology, DNA-based UCNPs offer predesigned functionality and potential. To fully harness the capabilities of UCNPs integrated with DNA, various DNA-UCNP composites have been developed for diagnosis and therapeutics. In this review, beginning with the introduction of the UCNPs and the conjugation of DNA strands on the surface of UCNPs, we present an overview of the recent progress of DNA-UCNP composites while focusing on their applications for bioanalysis and therapeutics.

DNAzyme-Amplified Label-Free Biosensor for the Simple and Sensitive Detection of Pyrophosphatase

The level of pyrophosphatase (PPase) expression has been suggested as a potential biomarker of various cancers, and its prognostic value has been evaluated in patients suffering from lung cancer, colorectal cancer, and hyperthyroidism. However, the detection of PPase usually needs specific materials that require complicated, time-consuming reactions with restricted linear range and sensitivity, limiting their application in early clinical diagnosis. Herein, we developed a DNAzyme-based biosensor for the detection of PPase. In the presence of PPase, pyrophosphate (PPi) and Cu2+ ions released from the PPi-Cu2+-PPi complex induce the cleavage of the DNAzyme and the corresponding substrate. An apurinic/apyrimidinic (AP) site was elaborately designed within substrates that could encase the fluorophore 2-amino-5,6,7-trimethyl-1,8-naphthyridine (ATMND). The fluorescence of ATMND was initially quenched but restored when the DNAzyme/substrate complex was hydrolyzed with the release of ATMND. In this way, the PPase activity can be estimated by detecting the increased fluorescence of the released ATMND. Under optimized conditions, the activity of PPase could be analyzed at concentrations from 0.5 to 1000 mU, with the lowest detectable concentration being 0.5 mU. This work lays a foundation for developing a DNAzyme-amplified fluorescent biosensor with a high sensitivity, a wide linear range, and single-step operation for use as an easy diagnostic for PPase analysis.

Ppia is the most stable housekeeping gene for qRT-PCR normalization in kidneys of three Pkd1-deficient mouse models

Autosomal Dominant Polycystic Kidney Disease (ADPKD) is the most common inherited renal disorder, characterized by renal cyst development leading to end-stage renal disease. Although the appropriate choice of suitable reference is critical for quantitative RNA analysis, no comparison of frequently used “housekeeping” genes is available. Here, we determined the validity of 7 candidate housekeeping genes (Actb, Actg1, B2m, Gapdh, Hprt, Pgam1 and Ppia) in kidney tissues from mouse models orthologous to ADPKD, including a cystic mice (CY) 10–12 weeks old (Pkd1^flox/flox:Nestin^cre/Pkd1^flox/−:Nestin^cre, n = 10) and non-cystic (NC) controls (Pkd1^flox/^flox/Pkd1^flox/^-, n = 10), Pkd1-haploinsufficient (HT) mice (Pkd1^+/−, n = 6) and wild-type (WT) controls (Pkd1^+/+, n = 6) and a severely cystic (SC) mice 15 days old (Pkd1^V/V, n = 7) and their controls (CO, n = 5). Gene expression data were analyzed using six distinct statistical softwares. The estimation of the ideal number of genes suggested the use of Ppia alone as sufficient, although not ideal, to analyze groups altogether. Actb, Hprt and Ppia expression profiles were correlated in all samples. Ppia was identified as the most stable housekeeping gene, while Gapdh was the least stable for all kidney samples. Stat3 expression level was consistent with upregulation in SC compared to CO when normalized by Ppia expression. In conclusion, present findings identified Ppia as the best housekeeping gene for CY + NC and SC + CO groups, while Hprt was the best for the HT + WT group.

Integration of chemically modified nucleotides with DNA strand displacement reactions for applications in living systems

Watson-Crick base pairing rules provide a powerful approach for engineering DNA-based nanodevices with programmable and predictable behaviors. In particular, DNA strand displacement reactions have enabled the development of an impressive repertoire of molecular devices with complex functionalities. By relying on DNA to function, dynamic strand displacement devices represent powerful tools for the interrogation and manipulation of biological systems. Yet, implementation in living systems has been a slow process due to several persistent challenges, including nuclease degradation. To circumvent these issues, researchers are increasingly turning to chemically modified nucleotides as a means to increase device performance and reliability within harsh biological environments. In this review, we summarize recent progress toward the integration of chemically modified nucleotides with DNA strand displacement reactions, highlighting key successes in the development of robust systems and devices that operate in living cells and in vivo. We discuss the advantages and disadvantages of commonly employed modifications as they pertain to DNA strand displacement, as well as considerations that must be taken into account when applying modified oligonucleotide to living cells. Finally, we explore how chemically modified nucleotides fit into the broader goal of bringing dynamic DNA nanotechnology into the cell, and the challenges that remain. This article is categorized under: Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Diagnostic Tools > Biosensing.

In Vivo Monitoring of Intracellular Metabolite in a Microalgal Cell Using an Aptamer/Graphene Oxide Nanosheet Complex

Real-time sensing and imaging of intracellular metabolites in living cells are crucial tools for the characterization of complex biological processes, including the dynamic fluctuation of metabolites. Therefore, additional efforts are required to develop in vivo detection strategies for the visualization and quantification of specific target metabolites, particularly in microalgae. In this study, we developed a strategy to monitor a specific microalgal metabolite in living cells using an aptamer/graphene oxide nanosheet (GOnS) complex. As a proof-of-concept, β-carotene, an antioxidant pigment that accumulates in most microalgal species, was chosen as a target metabolite. To achieve this, a β-carotene-specific aptamer was selected through graphene oxide-assisted systematic evolution of ligands by exponential enrichment (GO-SELEX) and characterized thereafter. The aptamer could sensitively sense the changes in the concentration of β-carotene (i.e., the target metabolite) and more specifically bind to β-carotene than to nontargets. The selected aptamer was labeled with a fluorophore (fluorescein; FAM) and allowed to form an aptamer/GOnS complex that protected the aptamer from nucleic cleavages. The aptamer/GOnS complex was delivered into the cells via electroporation, thus enabling the sensitive monitoring of β-carotene in the cell by quantifying the aptamer fluorescence intensity. The results suggest that our biocompatible strategy could be employed to visualize and semiquantify intracellular microalgae metabolites in vivo, which holds a great potential in diverse fields such as metabolite analysis and mutant screening.

Fundamental photophysics of isomorphic and expanded fluorescent nucleoside analogues

Fluorescent nucleoside analogues (FNAs) are structurally diverse mimics of the natural essentially non-fluorescent nucleosides which have found numerous applications in probing the structure and dynamics of nucleic acids as well as their interactions with various biomolecules. In order to minimize disturbance in the labelled nucleic acid sequences, the FNA chromophoric groups should resemble the natural nucleobases in size and hydrogen-bonding patterns. Isomorphic and expanded FNAs are the two groups that best meet the criteria of non-perturbing fluorescent labels for DNA and RNA. Significant progress has been made over the past decades in understanding the fundamental photophysics that governs the spectroscopic and environmentally sensitive properties of these FNAs. Herein, we review recent advances in the spectroscopic and computational studies of selected isomorphic and expanded FNAs. We also show how this information can be used as a rational basis to design new FNAs, select appropriate sequences for optimal spectroscopic response and interpret fluorescence data in FNA applications.

Nuclease-resistant signaling nanostructures made entirely of DNA oligonucleotides

Nucleic acid probes have the advantages of excellent biocompatibility, biodegradability, versatile functionalities and remarkable programmability. However, the low biostability of nucleic acid probes under complex physiological conditions limits their in vivo application. Despite impressive progress in the development of inorganic material-mediated biostable nucleic acid nanostructures, uncertain systemic toxicity of composite nanocarriers has hindered their application in living organisms. In the field of biomedicine, as a promising alternative capable of avoiding potential cytotoxicity, biologically stable nanostructures composed entirely of DNA oligonucleotides have been rapidly developed in recent years, offering an exciting in vivo tool for cancer diagnosis and clinical treatment. In this review, we summarize the recent advances in the development of nuclease-resistant DNA nanostructures with different geometrical shapes, such as tetrahedron, octahedron, DNA triangular prism (DTP), DNA nanotubes and DNA origami, introduce innovative assembly strategies, and discuss unique structural advantages and especially biological applications in cellular imaging and targeted drug delivery in an organism. Finally, we conclude with the challenges in the clinical development of DNA nanostructures and present an outlook of the future of this rapidly expanding field.

Impact of the Coverage of Aptamers on a Nanoparticle on the Binding Equilibrium and Kinetics between Aptamer and Protein

Knowledge of the interaction between aptamer and protein is integral to the design and development of aptamer-based biosensors. Nanoparticles functionalized with aptamers are commonly used in these kinds of sensors. As such, studies into how the number of aptamers on the nanoparticle surface influence both kinetics and thermodynamics of the binding interaction are required. In this study, aptamers specific for interferon gamma (IFN-γ) were immobilized on the surface of gold nanoparticles (AuNPs), and the effect of surface coverage of aptamer on the binding interaction with its target was investigated using fluorescence spectroscopy. The number of aptamers were adjusted from an average of 9.6 to 258 per particle. The binding isotherm between AuNPs-aptamer conjugate and protein was modeled with the Hill-Langmuir equation, and the determined equilibrium dissociation constant (K'_D) decreased 10-fold when increasing the coverage of aptamer. The kinetics of the reaction as a function of coverage of aptamer were also investigated, including the association rate constant (k_on) and the dissociation rate constant (k_off). The AuNPs-aptamer conjugate with 258 aptamers per particle had the highest k_on, while the k_off was similar for AuNPs-aptamer conjugates with different surface coverages. Therefore, the surface coverage of aptamers on AuNPs affects both the thermodynamics and the kinetics of the binding. The AuNPs-aptamer conjugate with the highest surface coverage is the most favorable in biosensors considering the limit of detection, sensitivity, and response time of the assay. These findings deepen our understanding of the interaction between aptamer and target protein on the particle surface, which is important to both improve the scientific design and increase the application of aptamer-nanoparticle based biosensor.

Pyrene-Modified Guanine Cluster Probes Forming DNA/RNA Hybrid Three-Way Junctions for Imaging of Intracellular MicroRNAs

MicroRNAs (miRNAs) regulate gene expression in cells; high levels of expression are associated with various cancers. In this paper, we describe ^PyA-modified nucleic acid probes that can detect intracellular miRNAs by forming DNA/RNA hybrid three-way junction structures containing a fluorescent scaffold-a so-called G-cluster. This G-cluster featured two mismatched strands, four guanine residues, and one fluorescent adenine residue having a pyrene moiety covalently connected at the 8-position through an acetylene linker. The scaffold underwent a dramatic shift in its emission wavelength when two mismatched strands formed a duplex, similar to the behavior of an adenine pentad system (A-cluster). We applied the G-cluster scaffold in a three-way junction system to probe for miRNAs; its red-shifted fluorescence intensity and stability were greater than those reported previously for A-cluster three-way junction probes. Furthermore, confocal microscopy of cancer cell lines revealed bright fluorescence emissions in response to the miRNAs in the cells. Thus, this system can be applied intracellularly as a potential fluorescent probe for the detection of various biologically important nucleic acids.

Luminescent Nanomaterials (II)

In this review, we focus on sensing techniques and biological applications of various luminescent nanoparticles including quantum dot (QD), up-conversion nanoparticles (UCNPs) following the previous chapter. Fluorescent phenomena can be regulated or shifted by interaction between biological targets and luminescence probes depending on their distance, which is so-called Fӧrster resonance energy transfer (FRET). QD-based FRET technique, which has been widely applied as a bioanalytical tool, is described. We discuss time-resolved fluorescence (TRF) imaging and flow cytometry technique, using photoluminescent nanoparticles with unique properties for effectively improving selectivity and sensitivity. Based on these techniques, bioanalytical and biomedical application, bioimaging with QD, UCNPs, and Euripium-activated luminescent nanoprobes are covered. Combination of optical property of these luminescent nanoparticles with special functions such as drug delivery, photothermal therapy (PTT), and photodynamic therapy (PDT) is also described.

Versatile Multiplex Endogenous RNA Detection with Simultaneous Signal Normalization Using Mesoporous Silica Nanoquenchers

Detection of endogenous tumor-related RNA is vital for cancer diagnostics. Despite advancements made, live-cell RNA detection still faces numerous problems, such as low signal output and cell-to-cell variations arising from differences in probe uptake. To address these issues, we designed a versatile and highly sensitive mRNA/miRNA nanosensor featuring, for the first time, signal amplification and in-built signal normalization. Using dye-loaded mesoporous silica nanoquenchers (qMSNs) capped with target-corresponding antisense oligos (ASOs), direct fluorescence "Turn-ON" with signal amplification was achieved upon target binding. By readily varying the capping ASOs as well as cargo dyes, a suite of RNA nanosensors for multiplex target detection could be easily prepared. Further modification of glyceraldehyde 3-phosphate dehydrogenase (GAPDH) mRNA-responsive molecular beacons (MBs) onto our nanosensor enabled dual detection of target RNA and GAPDH mRNA, allowing for target signal normalization using GAPDH as a reference. We demonstrated that this newly developed nanosensor could successfully differentiate between noncancer and cancer cells, as well as accurately monitor the relative expression levels of multiple tumor-related RNAs simultaneously in different cancer cell lines, with a high degree of specificity and sensitivity, functioning as a noninvasive "qPCR mimic" imaging tool in live cells.

Complex Nucleic Acid Hybridization Reactions inside Capillary-Driven Microfluidic Chips

Nucleic acid hybridization reactions play an important role in many (bio)chemical fields, for example, for the development of portable point-of-care diagnostics, and often such applications require nucleic acid-based reaction systems that ideally run without enzymes under isothermal conditions. The use of novel capillary-driven microfluidic chips to perform two isothermal nucleic acid hybridization reactions, the simple opening of molecular beacon structures and the complex reaction cascade of a clamped-hybridization chain reaction (C-HCR), is reported here. For this purpose, reagents are arranged in a self-coalescence module (SCM) of a passive silicon microfluidic chip using inkjet spotting. The SCM occupies a footprint of ≈7 mm² of a ≈0.4 × 2 cm² microfluidic chip. By means of fluorophore-labeled DNA probes, the hybridization reactions can be analyzed in just ≈2 min and using only ≈3 µL of the sample. Furthermore, the SCM chip offers a variety of reagent delivery options, allowing, for example, the influence of the initiator concentration on the kinetics of C-HCR to be investigated systematically with minimal sample and time requirements. These results suggest that self-powered microfluidic chips equipped with a SCM provide a powerful platform for performing and investigating complex reaction systems.

2'-O-Methyl molecular beacon: a promising molecular tool that permits elimination of sticky-end pairing and improvement of detection sensitivity

An innovative 2'-O-methyl molecular beacon (MB) has been designed and prepared with improved thermal stability and unique nuclease resistance. The employment of 2'-O-methyl MBs helps efficiently suppress the background signal, while DNase I is responsible for the signal amplification and elimination of sticky-end pairing. The coupled use of 2'-O-methyl MBs and DNase I makes it possible to develop an enzyme-aided strategy for amplified detection of DNA targets in a sensitive and specific fashion. The analysis requires only mix-and-measure steps that can be accomplished within half an hour. The detection sensitivity is theoretically determined as 27.4 pM, which is nearly 200-fold better than that of the classic MB-based assay. This proposed sensing system also shows desired selectivity. All these features are of great importance for the design and application of MBs in biological, chemical, and biomedical fields.

Carbazole modified oligonucleotides: synthesis, hybridization studies and fluorescence properties

Synthesis of the novel thiophenyl carbazole phosphoramidite DNA building block 5 was accomplished in four steps using a Suzuki-Miyaura cross-coupling reaction from the core carbazole and it was seamlessly accommodated into a 9-mer DNA-based oligonucleotide by incorporation at the flanking 5'-end in combination with a central insertion of an LNA-T nucleotide. The carbazole-containing oligonucleotide was combined in different duplex hybrids, which were characterized by thermal denaturation, circular dichroism and fluorescence studies. The carbazole monomer modulates the duplex stability in various ways. Thus, monomer Z increased the thermal stability of the 9-mer towards the complementary 9-mer/15-mer DNA duplex by 4.2 °C. Furthermore, indications of its intercalation into the duplex were obtained by modeling studies and robust decreases in fluorescence emission intensities upon duplex formation. In contrast, no clear intercalating tendency was corroborated for monomer Z within the DNA/RNA hybrid duplex as indicated by moderate quenching of the fluorescence and similar duplex thermal stabilities relative to the corresponding control duplex. The recognition efficiencies of the carbazole modified oligonucleotide toward single nucleotide mismatches were studied with two 15-mer model targets (DNA and RNA). For both systems, mismatches positioned at the juxtaposition of the carbazole monomer showed pronounced deceases in thermal denaturation temperature. Steady-state fluorescence emission studies of all mismatched duplexes with incorporation of Z monomer typically displayed efficient fluorescence quenching.

Conformational Conversion Enhances Cellular Uptake of F Base Double-Strand-Conjugated Oligonucleotides

Artificial bases have emerged as a useful tool to expand genetic alphabets and biomedical applications of oligonucleotides. Herein, we reported that the conformation conversion enhances cellular uptake of hydrophobic 3,5-bis(trifluoromethyl)benzene (F) base double-strand-conjugated oligonucleotides. The formation of the F base double-strand caged the hydrophobic F base in the duplex strand, thus preventing F base from interacting with cells to some extent. However, upon conversion of F base double-strand-conjugated oligonucleotide to F base single-strand-conjugated oligonucleotide, F bases then were allowed to interact with cells by stronger hydrophobic interactions, followed by cellular uptake. The results were concluded as a pairing-induced cage effect of F base and have the potential for the construction of stimuli-responsive cellular uptake of functional nucleic acids.

Bioluminescent Protein-Inhibitor Pair in the Design of a Molecular Aptamer Beacon Biosensing System

Although bioluminescent molecular beacons designed around resonance quenchers have shown higher signal-to-noise ratios and increased sensitivity compared with fluorescent beacon systems, bioluminescence quenching is still comparatively inefficient. A more elegant solution to inefficient quenching can be realized by designing a competitive inhibitor that is structurally very similar to the native substrate, resulting in essentially complete substrate exclusion. In this work, we designed a conjugated anti-interferon-γ (IFN-γ) molecular aptamer beacon (MAB) attached to a bioluminescent protein, Gaussia luciferase (GLuc), and an inhibitor molecule with a similar structure to the native substrate coelenterazine. To prove that a MAB can be more sensitive and have a better signal-to-noise ratio, a bioluminescence-based assay was developed against IFN-γ and provided an optimized, physiologically relevant detection limit of 1.0 nM. We believe that this inhibitor approach may provide a simple alternative strategy to standard resonance quenching in the development of high-performance molecular beacon-based biosensing systems.

A Peptide-PNA Hybrid Beacon for Sensitive Detection of Protein Biomarkers in Biological Fluids

Specific and rapid detection of proteins in biological fluids poses a challenging problem. In biological fluids, many proteins are present at low concentrations, requiring high affinity and specificity of the beacon-protein interaction. We report the design of a peptide-PNA hybrid beacon that exploits the dimeric nature of a target protein, S100B, a biomarker for brain trauma, to enhance binding affinity and specificity. The complementary base-pairing of the PNA bases brings the two arms of the beacon, one carrying an Alexa tag and the other carrying a Dabcyl moiety, into proximity, thus quenching Alexa fluorescence. Each of the arms carries a sequence that binds to one of the subunits. Binding to the target separates the quencher from the probe lifting the quenching of fluorescence. Enhanced affinity and specificity resulting from simultaneously binding to two sites allowed specific detection of S100B at low-nanomolar concentrations in the presence of serum. The design can be easily adapted for the detection of proteins containing multiple binding sites and could prove useful for rapid and sensitive biomarker detection.

Nucleic-Acid Structures as Intracellular Probes for Live Cells

The chemical composition of cells at the molecular level determines their growth, differentiation, structure, and function. Probing this composition is powerful because it provides invaluable insight into chemical processes inside cells and in certain cases allows disease diagnosis based on molecular profiles. However, many techniques analyze fixed cells or lysates of bulk populations, in which information about dynamics and cellular heterogeneity is lost. Recently, nucleic-acid-based probes have emerged as a promising platform for the detection of a wide variety of intracellular analytes in live cells with single-cell resolution. Recent advances in this field are described and common strategies for probe design, types of targets that can be identified, current limitations, and future directions are discussed.

Integrating Artificial Intelligence and Nanotechnology for Precision Cancer Medicine

Artificial intelligence (AI) and nanotechnology are two fields that are instrumental in realizing the goal of precision medicine-tailoring the best treatment for each cancer patient. Recent conversion between these two fields is enabling better patient data acquisition and improved design of nanomaterials for precision cancer medicine. Diagnostic nanomaterials are used to assemble a patient-specific disease profile, which is then leveraged, through a set of therapeutic nanotechnologies, to improve the treatment outcome. However, high intratumor and interpatient heterogeneities make the rational design of diagnostic and therapeutic platforms, and analysis of their output, extremely difficult. Integration of AI approaches can bridge this gap, using pattern analysis and classification algorithms for improved diagnostic and therapeutic accuracy. Nanomedicine design also benefits from the application of AI, by optimizing material properties according to predicted interactions with the target drug, biological fluids, immune system, vasculature, and cell membranes, all affecting therapeutic efficacy. Here, fundamental concepts in AI are described and the contributions and promise of nanotechnology coupled with AI to the future of precision cancer medicine are reviewed.

Hg2+-mediated stabilization of G-triplex based molecular beacon for label-free fluorescence detection of Hg2+, reduced glutathione, and glutathione reductase activity

G-triplexes have been reported recently with the similar function to G-quadruplex that can combine with thioflavin T (ThT) and emit strong fluorescence but easier to be controlled and excited. In this work, we report an Hg²⁺-mediated stabilization of G-triplex based functional molecular beacon (G3TMB) sensing system for the label-free detection of Hg²⁺, reduced glutathione (GSH), and glutathione reductase (GR) activity. In the presence of Hg²⁺, the extended G-triplex sequence containing the "T" bases can form a stable hairpin structure due to the strong interactions of "T-Hg²⁺-T", resulting in the locking of G-tracts in the stem of the G3TMB effectively. However, the hairpin structure of the G3TMB can be opened by the introduction of GSH through the stronger "GSH-Hg²⁺" interaction. Therefore, by employing the fact that GR can catalyze the reduction of oxidized glutathione (GSSG) into GSH, this concept can be applied to fluorescence "off-on" detection of GR activity, with a linear range of 0.02-30 mU/mL and detection limit of 0.01 mU/mL. This work may expand a new perspective of G-triplex based functional molecular beacon as the label-free fluorescent probes in the detection of small biomolecule and enzyme activity.

A simple fluorescent strategy based on triple-helix molecular switch for sensitive detection of chloramphenicol

A simple fluorescent strategy based on the formation of triple-helix molecular switch (THMS) between a signal transduction probe (STP) and an aptamer (Apt) was constructed for the determination of chloramphenicol (CAP). A weak fluorescence intensity was observed for STP solution due to the proximity of fluorophore and quencher through intramolecular DNA hybridization, causing the fluorescence quenching. The fluorescence intensity of the system was significantly enhanced after the addition of Apt. It was attributed to the formation of THMS between the Apt and STP through the Watson-Crick and Hoogsteen base pairing, resulting in the restoration of fluorescence because of the long distance between the fluorophore and quencher of STP. The fluorescence intensity of the system decreased due to the release of STP caused by the specific binding between Apt and CAP. The quantitative analysis of CAP could be achieved based on the decreased fluorescence intensity. The parameters affecting the performance of THMS including the Apt arm length, pH of buffer solution, Mg²⁺ concentration and the formation time of THMS were investigated in detail. Under the optimal conditions (Apt arm length of 9 bases, pH of 6.5, 2.5 × 10³ μmol L^-1 Mg²⁺, THMS formation time of 30 min), the decreased fluorescence intensity and the concentration of chloramphenicol were linear in the range of 5.0 × 10^-3-2.0 × 10^-1 μmol L^-1 with the correlation coefficient of 0.9963. The limit of detection was 1.2 nmol L^-1. Subsequently, the developed method was applied to the analysis of chloramphenicol in honey sample, and the recovery was between 84.5% and 103.0% with relative standard deviation less than 4.6%.

Application of a Y-type-DNA-functionalized nanogold probe featuring specific telomerase recognition and doxorubicin release in cancer cells

A Y-type-DNA-functionalized nanogold probe was synthesized to identify telomerase and trigger drug release in cancer cells.

Carbon dot-based fluorometric optical sensors: an overview

Fluorescent carbon dots (CDs) are a new class of carbon nanomaterials and have demonstrated excellent optical properties, good biocompatibility, great aqueous solubility, low cost, and simple synthesis. Since their discovery, various synthesis methods using different precursors were developed, which were mainly classified as top-down and bottom-up approaches. CDs have presented many applications, and this review article mainly focuses on the development of CD-based fluorescent sensors. The sensing mechanisms, sensor design, and sensing properties to various targets are summarized. Broad ranges of detection, including temperature, pH, DNA, antibiotics, cations, cancer cells, and antibiotics, have been discussed. In addition, the challenges and future directions for CDs as sensing materials are also presented.

Exploration of intramolecular split G-quadruplex and its analytical applications

Distinct from intermolecular split G-quadruplex (Inter-SG), intramolecular split G-quadruplex (Intra-SG) which could be generated in a DNA spacer-inserted G-quadruplex strand has not been systematically explored. Not only is it essential for the purpose of simplicity of DNA-based bioanalytical applications, but also it will give us hints how to design split G-quadruplex-based system. Herein, comprehensive information is provided about influences of spacer length and split mode on the formation of Intra-SG, how to adjust its thermodynamic stability, and selection of optimal Intra-SG for bioanalysis. For instances, non-classical Intra-SG (e.g. 2:10, 4:8 and 5:7) displays lower stability than classical split strands (3:9, 6:6 and 9:3), which is closely related to integrity of consecutive guanine tract; as compared to regular Intra-SG structures, single-thymine capped ones have reduced melting temperature, providing an effective approach to adjustment of stability. It is believed that the disclosed rules in this study will contribute to the effective application of split G-quadruplex in the field of DNA technology in the future.

Flavin Binding Allosteric Aptamer with Noncovalent Labeling for miR Sensing

Modular allosteric aptamers with discrete recognition and signaling regions provide a facile method of carrying out label-free detection by forgoing complex target labeling requirements. Herein, we describe the design and function of an aptamer scaffold capable of forming a hairpin loop in the presence of FAD (the signaling trigger). The aptamer includes a recognition region for the microRNA (miR) Let-7i. Upon selective miR hybridization, the aptamer undergoes a conformational shift to release FAD and thus produce a measurable response. As a result, the described method can sensitively and selectively detect miR Let-7i with a wide linear range of 0.1 pM to 1 μM and a detection limit of 150 fM. Additionally, this strategy was able to selectively discriminate between sequences with 1- and 2-nucleotide (nt) differences.

A universal aptasensing platform based on cryonase-assisted signal amplification and graphene oxide induced quenching of the fluorescence of labeled nucleic acid probes: application to the detection of theophylline and ATP

This study describes a universal fluorometric method for sensitive detection of analytes by using aptamers. It is based on the use of graphene oxide (GO) and cryonase-assisted signal amplification. GO is a strong quencher of FAM-labeled nucleic acid probes, while cryonase digests all types of nucleic acid probes. This makes the platform widely applicable to analytes for which the corresponding aptamers are available. Theophylline and ATP were chosen as model analytes. In the absence of targets, dye-labeled aptamers are in a flexible single strand state and adsorb on the GO. As a result, the probes are non-fluorescent due to the efficient quenching of dyes by GO. Upon the addition of a specific target, the aptamer/target complex desorbed from the GO surface and the probe becomes fluorescent. The released complex will immediately become a substrate for cryonase digestion and subsequently releasing the target to bind to another aptamer to initiate the next round of cleavage. This cyclic reaction will repeat again and again until all the related-probes are consumed and all fluorophores light up, resulting in significant fluorescent signal amplification. The detection limits are 47 nM for theophylline and 22.5 nM for ATP. This is much better than that of known methods. The assay requires only mix-and-measure steps that can be accomplished rapidly. In our perception, the detection scheme holds great promise for the design enzyme-aided amplification mechanisms for use in bioanalytical methods. Graphical abstract A cryonase-assisted signal amplification (CASA) method has been developed by using graphene oxide (GO) conjugated with a fluorophore-labeled aptamer for fluorescence signal generation. It has a large scope because it may be applied to numerous analytes.

Supramolecular Microgels with Molecular Beacons at the Interface for Ultrasensitive, Amplification-Free, and SNP-Selective miRNA Fluorescence Detection

In this study, a supramolecular structure with femtomolar biorecognition properties is proposed for use in analytical devices. It is obtained by an innovative interface between synthetic hydrogel polymers and molecular beacon (mb) probes. Supramolecularly structured microgels are synthetized with a core-shell architecture with specific dyes polymerized in a desired compartment. Mb probes are opportunely conjugated at the microgel interface so that their recognition mechanism is preserved and their spatial distribution is optimized to avoid crowding effects. The miR-21, a microRNA involved in various biological processes and usually used as a biomarker in early cancer diagnosis, has been selected as the target. The results demonstrate that by tuning the spatial distribution of molecular probes immobilized on the microgel and/or the amount of microgels, the assay shows scalable sensitivity reaching a limit of detection down to about 10 fM, without amplification steps and with detection time as short as 1 h. The assay results specific toward single mutated targets, and it is stable in the presence of high-interfering oligonucleotides concentrations. The miRNA target is also detected in human serum with performances similar to those observed in PBS buffer because of microgel antifouling properties without the need of any surface treatment. All tests were performed in a low sample volume (20 μL). As a result, mb-microgel represents an innovative biosensor to precisely quantify microRNAs in a direct (mix&read), scalable, and selective way. Such an approach paves the way for creating innovative biosensing interfaces with other probes, such as hairpins, aptamers, and PNA.

Kinetics and equilibrium constants of oligonucleotides at low concentrations. Hybridization and melting study

Although DNA hybridization/melting is one of the most important biochemical reactions, the non-trivial kinetics of the process is not yet fully understood. In this work, we use Förster resonance energy transfer (FRET) to investigate the influence of temperature, ionic strength, and oligonucleotide length on the kinetic and equilibrium constants of DNA oligonucleotide binding and dissociation. We show that at low reagent concentrations and ionic strength, the time needed to establish equilibrium between single and double strand forms may be of the order of days, even for simple oligonucleotides of a length of 20 base pairs or less. We also identify and discuss the possible artifacts related to fluorescence-based experiments conducted in extremely dilute solutions. The results should prove useful for the judicious design of technologies based on DNA-matching, including sensors, DNA multiplication, sequencing, and gene manipulation.

Progress in biosensor based on DNA-templated copper nanoparticles

During the last decades, by virtue of their unique physicochemical properties and potential application in microelectronics, biosensing and biomedicine, metal nanomaterials (MNs) have attracted great research interest and been highly developed. Deoxyribonucleic acid (DNA) is a particularly interesting ligand for templating bottom-up nanopreparation, by virtue of its excellent properties including nanosized geometry structure, programmable and artificial synthesis, DNA-metal ion interaction and powerful molecular recognition. DNA-templated copper nanoparticles (DNA-CuNPs) has been developed in recent years. Because of its advantages including simple and rapid preparation, high efficiency, MegaStokes shifting and low biological toxicity, DNA-CuNPs has been highly exploited for biochemical sensing from 2010, especially as a label-free detection manner, holding advantages in multiple analytical technologies including fluorescence, electrochemistry, surface plasmon resonance, inductively coupled plasma mass spectrometry and surface enhanced Raman spectroscopy. This review comprehensively tracks the preparation of DNA-CuNPs and its application in biosensing, and highlights the potential development and challenges regarding this field, aiming to promote the advance of this fertile research area.

A Universal Paper-Based Electrochemical Sensor for Zero-Background Assay of Diverse Biomarkers

This paper describes a universal paper-based electrochemical sensing platform that uses a paper modified with signal molecule-labeled DNA and a screen-printed electrode along with target recognition solutions to achieve the detection of multiple types of biomarkers. These assays rely on the target-induced synthesis of Mg²⁺-dependent DNAzyme for catalyzing the cleavage of substrate DNA from paper, which have been demonstrated by using microRNA recognition probe for miR-21, a phosphorylated hairpin probe for alkaline phosphatase, and a DNA aptamer for carcinoembryonic antigen assays, respectively. Taking advantages of the high specific target-triggered polymerization/nicking and DNAzyme-catalyzed signal amplification, the present assays enable highly sensitive and selective detection of these targets with zero-background. These assays can also be applied to detect target in spiked serum samples, demonstrating the potential for point-of-care detection of clinical samples.