Palladium-Cobalt Nanotube Arrays Supported on Carbon Fiber Cloth as High-Performance Flexible Electrocatalysts for Ethanol Oxidation

CoP/RGO-Pd Hybrids with Heterointerfaces as Highly Active Catalysts for Ethanol Electrooxidation

The ethanol oxidation reaction is of critical importance to the commercial viability of direct ethanol fuel cell technology. However, owing to the poor C-C bond cleavage capability, almost all ethanol oxidation is incomplete and suffers from low selectivity toward the C1 pathway. Herein, under the support of theoretical calculations that the heterointerfaces between CoP and Pd can reduce the energy barrier of C-C bond cleavage, rich heterointerfaces in CoP/RGO-Pd hybrids were designed to improve ethanol electrooxidation performance through enhancing the selectivity toward the C1 pathway. The experimental results show that the faradaic efficiency of the C1 pathway of CoP/RGO-Pd hybrids is as high as 27.6%, surpassing most reported catalysts in the literature. As a result of this enhancement, CoP/RGO-Pd10 exhibits mass activity as high as 4597 mA·mg_Pd^-1 and specific activity as high as 10 mA·cm^-2, which are much higher than those of other Pd-based electrocatalysts.

Promoting Effects of Au Submonolayer Shells on Structure-Designed Cu-Pd/Ir Nanospheres: Greatly Enhanced Activity and Durability for Alkaline Ethanol Electro-Oxidation

Rationally engineering the surface physicochemical properties of nanomaterials can improve their activity and durability for various electrocatalytic and energy conversion applications. Cu-Pd/Ir (CPI) nanospheres (NSs) anchored on N-doped porous graphene (NPG) [(CPI NSs/NPG)] have been recently demonstrated as a promising electrocatalyst for the alkaline ethanol oxidation reaction (EOR); to further enhance their electrocatalytic performance, the NPG-supported CPI NSs are coated with Au submonolayer (SML) shells (SMSs), through which their surface physicochemical properties can be tuned. CPI NSs/NPG is prepared by our previously developed method and possesses the special structures of composition-graded Cu₁Pd₁ and surface-doped Ir_0.03. The Au SMSs with designed surface coverages are formed via an electrochemical technology involving incomplete Cu underpotential deposition (UPD) and Au³⁺ galvanic replacement. A distinctive volcano-type relation between the EOR electrocatalytic activity and the Au-SMS surface coverage for CPI@Au_SML NSs/NPG is revealed, and the optimal CPI@Au_1/6ML NSs/NPG greatly surpasses commercial Pd/C and CPI NSs/NPG in electrocatalytic activity and noble metal utilization. More importantly, its electrocatalytic durability in 1 h chronoamperometric and 500-cycle potential cycling degradation tests is also significantly improved. According to detailed physicochemical characterizations, electrochemical analyses, and density functional theory calculations, the promoting effects of the Au SMS for enhancing the EOR electrocatalytic activity and durability of CPI NSs/NPG can be mainly attributed to the greatly weakened carbonaceous intermediate bonding and properly increased surface oxidation potential. This work also proposes a versatile and effective strategy to tune the surface physicochemical properties of metal-based nanomaterials via incomplete UPD and metal-cation galvanic replacement for advancing their electrocatalytic and energy conversion performance.

Unexpectedly high stability and surface reconstruction of PdAuAg nanoparticles for formate oxidation electrocatalysis

High-performance Pd-based nanocatalysts for alkaline methanol and formate fuel cells have stimulated widespread attention. Hence, a series of ternary Pd-Au-Ag nanoalloys have been synthesized on carbon nanotubes, which demonstrate promising activity and unexpectedly high stability for the formate oxidation reaction (FOR) in alkaline medium. The ternary Pd3Au3Ag1 nanoalloy catalyst showed an initial mass activity of 4.51 A mgPd-1 and a retained mass activity of 1.32 A mgPd-1 after chronoamperometric measurement for 3600 s, which are superior to the best values for all FOR catalysts reported so far. The Pd3Au3Ag1 catalyst also showed a good specific activity of 4.32 mA cm-2 for the methanol oxidation reaction. Furthermore, surface reconstruction of the Pd3Au3Ag1 nanoalloy was observed during FOR, where the activity of Pd3Au3Ag1 catalysts increased up to 33% and the cycling durability retained 55% after cyclic voltammetry with the upper potential of 1.7 V. The FOR enhancement is attributed to the formation of mixed oxidation-state Ag sites and the increase in the Pd surface coverage, and provides a new prospect for the design of ternary nanoalloy electrocatalysts for various fuel oxidation reactions.

Engineering cobalt oxide by interfaces and pore architectures for enhanced electrocatalytic performance for overall water splitting

The development of efficient electrocatalysts for overall water splitting is important for future renewable energy systems. Herein, macroporous CoO covered by Co/N-doped graphitic carbon nanosheet arrays (mac-CoO@Co/NGC NSAs) were constructed by engineering a mesoporous CoO nanowire (mes-CoO NWAs) core with highly conductive Co nanoparticles coated by a N-doped graphitic carbon (Co/NGC) shell. The in situ derived Co/NGC shell not only introduces electrocatalytic active sites for the hydrogen evolution reaction (HER) but also promotes the oxygen evolution reaction (OER) through the strong interaction between the CoO core and the Co/NGC shell. Moreover, the highly conductive Co/NGC shell crosslinks the isolated mesoporous CoO nanowires into a nanosheet rich in macropores, ensuring effective electron and mass transfer. Furthermore, the chemically stable N-doped graphitic carbon layer and physically stable hierarchical nanosheet arrays ensure the stability of the catalyst. Owing to the desirable interfaces and pore architecture, the as-prepared mac-CoO@Co/NGC NSAs can serve as highly effective, binder-free electrocatalysts for overall water splitting with a stable cell voltage of 1.62 V at 10 mA cm-2 for 35 h.

Synthesis of Palladium-Based Crystalline@Amorphous Core-Shell Nanoplates for Highly Efficient Ethanol Oxidation

Phase engineering of nanomaterials (PEN) offers a promising route to rationally tune the physicochemical properties of nanomaterials and further enhance their performance in various applications. However, it remains a great challenge to construct well-defined crystalline@amorphous core-shell heterostructured nanomaterials with the same chemical components. Herein, the synthesis of binary (Pd-P) crystalline@amorphous heterostructured nanoplates using Cu_{3- χ} P nanoplates as templates, via cation exchange, is reported. The obtained nanoplate possesses a crystalline core and an amorphous shell with the same elemental components, referred to as c-Pd-P@a-Pd-P. Moreover, the obtained c-Pd-P@a-Pd-P nanoplates can serve as templates to be further alloyed with Ni, forming ternary (Pd-Ni-P) crystalline@amorphous heterostructured nanoplates, referred to as c-Pd-Ni-P@a-Pd-Ni-P. The atomic content of Ni in the c-Pd-Ni-P@a-Pd-Ni-P nanoplates can be tuned in the range from 9.47 to 38.61 at%. When used as a catalyst, the c-Pd-Ni-P@a-Pd-Ni-P nanoplates with 9.47 at% Ni exhibit excellent electrocatalytic activity toward ethanol oxidation, showing a high mass current density up to 3.05 A mg_Pd ^-1 , which is 4.5 times that of the commercial Pd/C catalyst (0.68 A mg_Pd ^-1 ).

Tunable long-chains of core@shell PdAg@Pd as high-performance catalysts for ethanol oxidation

High performance nanomaterial catalysts have attracted great attention on the application for the direct alcohol fuel cell. To improve the catalytic behavior, it is a challenge to modulate the surface structure and morphology of catalysts. We integrated properties of advanced networks nanostructure and core@shell structure to form a series of PdAg@Pd worm-like networks catalysts. Importantly, the composition-optimized Pd₇₆Ag₂₄ WNWs exhibited excellent catalytic performance towards ethanol oxidation reaction compared to that of commercial Pd/C catalysts in alkaline media. The mass activity of Pd₇₆Ag₂₄ WNWs is 3.55 times higher than that of commercial Pd/C catalysts for EOR. Moreover, the Pd₇₆Ag₂₄ WNWs also showed superior stability after 250 successive cycles and kept far higher residual activities than that of the other catalysts. The synthesis of PdAg@Pd worm-like networks catalysts provides a reference to well combine the advantages of core@shell and networks structure to form high performance catalysts application for DEFC.

Flexible 3D carbon cloth as a high-performing electrode for energy storage and conversion

High-performance energy storage and conversion devices with high energy density, power density and long-term cycling life are of great importance in current consumer electronics, portable electronics and electric vehicles. Carbon materials have been widely investigated and utilized in various energy storage and conversion devices due to their excellent conductivity, mechanical and chemical stability, and low cost. Abundant excellent reviews have summarized the most recent progress and future outlooks for most of the current prime carbon materials used in energy storage and conversion devices, such as carbon nanotubes, fullerene, graphene, porous carbon and carbon fibers. However, the significance of three-dimensional (3D) commercial carbon cloth (CC), one of the key carbon materials with outstanding mechanical stability, high conductivity and flexibility, in the energy storage and conversion field, especially in wearable electronics and flexible devices, has not been systematically summarized yet. In this review article, we present a careful investigation of flexible CC in the energy storage and conversion field. We first give a general introduction to the common properties of CC and the roles it has played in energy storage and conversion systems. Then, we meticulously investigate the crucial role of CC in typical electrochemical energy storage systems, including lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries and supercapacitors. Following a description of the wide application potential of CC in electrocatalytic hydrogen evolution, oxygen evolution/reduction, full-water splitting, etc., we will give a brief introduction to the application of CC in the areas of photocatalytically and photoelectrochemically induced solar energy conversion and storage. The review will end with a brief summary of the typical superiorities that CC has in current energy conversion and storage systems, as well as providing some perspectives and outlooks on its future applications in the field. Our main interest will be focused on CC-based flexible devices due to the inherent superiority of CC and the increasing demand for flexible and wearable electronics.

Advanced Catalytic Materials for Ethanol Oxidation in Direct Ethanol Fuel Cells

Direct ethanol fuel cells (DEFCs) have emerged as promising and advanced power systems that can considerably reduce fossil fuel dependence, and thus have attracted worldwide attention. DEFCs have many apparent merits over the analogous devices fed with hydrogen or methanol. As the key constituents, the catalysts for both cathodes and anodes usually face some problems (such as high cost, low conversion efficiency, and inferior durability) that hinder the commercialization of DEFCs. This review mainly focuses on the most recent advances in nanostructured catalysts for anode materials in DEFCS. First, we summarize the effective strategies used to achieve highly active Pt- and Pd-based catalysts for ethanol electro-oxidation, including composition control, microstructure design, and the optimization of support materials. Second, a few non-precious catalysts based on transition metals (such as Fe, Co, and Ni) are introduced. Finally, we outline the concerns and future development of anode catalysts for DEFCs. This review provides a comprehensive understanding of anode catalysts for ethanol oxidation in DEFCs.

Dual roles of underpotential deposition in the synthesis of tetrahexahedral Pd–Ag alloy nanocrystals

Underpotential deposition of Ag(i) not only selectively passivates the high-index facets of tetrahexahedral nanocrystals, but also leads to the formation of Pd–Ag alloy structures.

Highly branched and defect-rich PdP nanosheets for ethanol oxidation electrocatalysis

Highly branched, defect-rich, and ultrathin PdP alloy nanosheets with enhanced electrocatalytic ethanol oxidation reaction (EOR) performance.

Trimetallic palladium-copper-cobalt alloy wavy nanowires improve ethanol electrooxidation in alkaline medium

Recently, engineering high performance Pd-based nanocatalysts for alkaline ethanol fuel cells has attracted wide attention. Here, we report a one-pot synthesis of low-palladium ternary palladium-copper-cobalt (PdCuCo) alloy nanowires (NWs) with a diameter of ∼4.0 nm to improve the mass activity (MA) of ethanol electrooxidation in alkaline medium. The MA (7.45 A mg^-1) of the Pd₃₁Cu₆₁Co₈ NWs is 8.5-fold and 12.4-fold that of commercial Pd black and Pd/C, respectively. The reaction mechanism of the EOR and the reasons for the activity enhancement on Pd₃₁Cu₆₁Co₈ NWs are elucidated based on the results of in situ Fourier transform infrared spectroscopy and structure characterization. Besides the electronic effect and surface defect sites, the coexistence of surface Cu and Co that have high capacities to activate water to produce reactive oxygen species is another key factor. This study shows an example of how to design low-palladium ternary PdCuCo NWs as improved anode electrocatalysts for alkaline direct ethanol fuel cells with high mass activity.

Insights into Compositional and Structural Effects of Bimetallic Hollow Mesoporous Nanospheres toward Ethanol Oxidation Electrocatalysis

A one-pot soft-templating method is reported to fabricate nanosized bimetallic PdAg hollow mesoporous nanospheres (HMSs) for electrocatalytic ethanol oxidation reaction (EOR). The synthesis relies on the "dual-template" surfactant of dioctadecyldimethylammonium chloride that drives in situ growth of mesoporous frameworks on the surface of vesicles into the HMSs with radially opened mesochannels. The synthetic protocol is extendable to engineer elemental compositions and hierarchical nanostructures of PdAg nanoalloys. This system thus provides a direct yet solid platform to understand catalytic add-in synergies of PdAg HMSs toward electrochemical EOR. By evaluating compositional and structural features separately, bimetallic Pd₆₅Ag₃₅ HMSs display the highest EOR activity with a mass activity of 4.61 A mg_Pd^-1. Mechanism studies indicate that synergistically electronic and bifunctional effects as well as structural advantages of Pd₆₅Ag₃₅ HMSs kinetically optimize the removal of poisoning carbonaceous intermediates and accelerate the diffusion processes (the rate-determining step), and thus promote the EOR performance accordingly.

Polyhedron-Assembled Ternary PtCuCo Nanochains: Integrated Functions Enhance the Electrocatalytic Performance of Methanol Oxidation at Elevated Temperature

Recently, the preparation of a high-performance one-dimensional alloy nanostructure for fuel cells has been given increasing attention due to its smart-structure merits and electronic effect triggered by alloying different kinds of metals at the nanoscale. In this study, unique ternary PtCuCo nanochains assembled with small polyhedra are first achieved and used as high-performance anode electrocatalysts toward methanol oxidation at elevated temperature (60 °C) that is closer to the operating temperature of direct methanol fuel cells than room temperature. The specific activity/mass activity of Pt₄₅Cu₃₅Co₂₀ one-dimensional nanochains can reach up to 18.24 mA cm^-2/4.19 A mg^-1_Pt that is 9.25/10.47 times that of commercial Pt black in sulfuric acid medium. After a 3600 s durability test, the remaining current density of Pt₄₅Cu₃₅Co₂₀ one-dimensional nanochains is 73.3 times that of commercial Pt black. The structure characterizations show that the high density of surface active sites, d-band center of the Pt downshift, moderate strain effect, and synergetic effect are jointly responsible for the enhanced electrocatalytic performance of one-dimensional ternary PtCuCo nanochains.

Recent Advances on Controlled Synthesis and Engineering of Hollow Alloyed Nanotubes for Electrocatalysis

The past decade has witnessed great progress in the synthesis and electrocatalytic applications of 1D hollow alloy nanotubes with controllable compositions and fine structures. Hollow nanotubes have been explored as promising electrocatalysts in the fuel cell reactions due to their well-controlled surface structure, size, porosity, and compositions. In addition, owing to the self-supporting ability of 1D structure, hollow nanotubes are capable of avoiding catalyst aggregation and carbon corrosion during the catalytic process, which are two other issues for the widely investigated carbon-supported nanoparticle catalysts. It is currently a great challenge to achieve high activity and stability at a relatively low cost to realize commercialization of these catalysts. An overview of the structural and compositional properties of 1D hollow alloy nanotubes, which provide a large number of accessible active sites, void spaces for electrolytes/reactants impregnation, and structural stability for suppressing aggregation, is presented. The latest advances on several strategies such as hard template and self-templating methods for controllable synthesis of hollow alloyed nanotubes with controllable structures and compositions are then summarized. Benefiting from the advantages of the unique properties and facile synthesis approaches, the capability of 1D hollow nanotubes is then highlighted by discussing examples of their applications in fuel-cell-related electrocatalysis. Finally, the remaining challenges and potential solutions in the field are summarized to provide some useful clues for the future development of 1D hollow alloy nanotube materials.

Cyanogel auto-reduction induced synthesis of PdCo nanocubes on carbon nanobowls: a highly active electrocatalyst for ethanol electrooxidation

Direct ethanol fuel cells (DEFCs) with a high conversion efficiency are quite promising candidates for energy conversion devices. Herein, we have successfully synthesized PdCo alloy nanocubes supported on carbon nanobowl (denoted as Pd₂Co₁/CNB) nanohybrids by using the cyanogel auto-reduction method at high temperature. The morphology, composition and structure of Pd₂Co₁/CNB nanohybrids are characterized in detail, revealing that PdCo nanocubes have a high alloying degree and special {110} facets. In cyclic voltammetry measurements, Pd₂Co₁/CNB nanohybrids show a mass activity of 1089.0 A g _Pd^-1 and a specific activity of 40.03 mA cm^-2 for ethanol electrooxidation at peak potential, which are much higher than that of the commercial Pd/C electrocatalyst (278.2 A g_Pd^-1 and 8.22 mA cm^-2). Additionally, chronoamperometry measurements show that Pd₂Co₁/CNB nanohybrids have excellent durability for ethanol electrooxidation. A high alloying degree, special {110} facets and the CNB supporting material contribute to the high activity and durability of Pd₂Co₁/CNB nanohybrids, making them a highly promising Pt-alternative electrocatalyst for ethanol electrooxidation in DEFCs.

Bi(OH)3/PdBi Composite Nanochains as Highly Active and Durable Electrocatalysts for Ethanol Oxidation

Developing high-performance electrocatalysts for the ethanol oxidation reaction (EOR) is critical to the commercialization of direct ethanol fuel cells. However, current EOR catalysts suffer from high cost, low activity, and poor durability. Here we report the preparation of PdBi-Bi(OH)₃ composite nanochains with outstanding EOR activity and durability. The incorporation of Bi can tune the electronic structure and downshift the d-band center of Pd while the surface decoration of Bi(OH)₃ can facilitate the oxidative removal of CO and other carbonaceous intermediates. As a result, the nanochains manifest an exceptional mass activity (5.30 A mg_Pd^-1, 4.6-fold higher than that of commercial Pd/C) and outstanding durability (with a retained current density of ∼1.00 A mg_Pd^-1 after operating for 20 000 s). More importantly, the nanochain catalyst can be reactivated, and negligible activity loss has been observed after operating for 200 000 s with periodic reactivation, making it one of the best EOR catalysts.

Noble Metal Based Alloy Nanoframes: Syntheses and Applications in Fuel Cells

Noble metal nanostructures are being used broadly as catalysts for energy conversion in fuel cells. To overcome the future energy crises, fuel cells are anticipated as clean energy sources because they can be operated at low temperature, their energy conversion is high and their carbon release is almost zero. However, an active and stable electrocatalyst is essential for the electrochemical reactions in fuel cells. Therefore, properties of the nanostructures greatly depend on the shape of the nanostructures. Individual as well as interaction properties are greatly affected by changes in the surface area of the nanostructures. By shape controlled synthesis, properties of the nanostructures could be further enhanced by increasing the surface area or active sites for electrocatalysts. Therefore, an efficient approach is needed for the fabrication of nanostructures to increase their efficiency, activity, or durability in fuel cells by reducing the usage of noble metals. Different types of hollow nanostructures until now have been prepared including nanoboxes, nanocages, nanoshells, nanoframes (NFs), etc. NFs are the hollow unique three-dimensional structure which have no walls-they only contain corners or edges so they have large surface area. In electrocatalytic reactions, the molecules involved in the reaction can easily reach the inner surface of the nanoframes, thus noble metals' utilization efficiency increases. NFs usually have high surface area, greater morphological and compositional stabilities, allowing them to withstand harsh environmental conditions. By considering the current challenges in fabrication of noble metal based alloy NFs as electrocatalysts, this review paper will highlight recent progress, design, and fabrication of noble metal alloy NFs through different strategies-mainly photocatalytic template, electrodeposition, Kirkendall effect, galvanic replacement, chemical/oxidative etching, combination of both and other methods. Then, electrochemical applications of NFs in fuel cells toward formic acid, methanol, ethanol, oxygen reduction reaction as well as bifunctional catalyst will also be highlighted. Finally, we will summarize different challenges in the fabrication of highly proficient nanocatalysts for the fuel cells with low cost, high efficiency and high durability, which are the major issues for the highly commercial use of fuel cells in the future.

Nanocatalysts for Electrocatalytic Oxidation of Ethanol

The use of ethanol as a fuel in direct alcohol fuel cells depends not only on its ease of production from renewable sources, but also on overcoming the challenges of storage and transportation. In an ethanol-based fuel cell, highly active electrocatalysts are required to break the C-C bond in ethanol for its complete oxidation at lower overpotentials, with the aim of increasing the cell performance, ethanol conversion rates, and fuel efficiency. In recent decades, the development of wet-chemistry methods has stimulated research into catalyst design, reactivity tailoring, and mechanistic investigations, and thus, created great opportunities to achieve efficient oxidation of ethanol. In this Minireview, the nanomaterials tested as electrocatalysts for the ethanol oxidation reaction in acid or alkaline environments are summarized. The focus is mainly on nanomaterials synthesized by using wet-chemistry methods, with particular attention on the relationship between the chemical and physical characteristics of the catalysts, for example, catalyst composition, morphology, structure, degree of alloying, presence of oxides or supports, and their activity for ethanol electro-oxidation. As potential alternatives to noble metals, non-noble-metal catalysts for ethanol oxidation are also briefly reviewed. Insights into further enhancing the catalytic performance through the design of efficient electrocatalysts are also provided.

Catalytically Active Au Layers Grown on Pd Nanoparticles for Direct Synthesis of H2O2: Lattice Strain and Charge-Transfer Perspective Analyses

Despite its effectiveness in improving the properties of materials, strain engineering has not yet been employed to endow catalytic characteristics to apparently nonactive metals. This limitation can be overcome by controlling simultaneously lattice strains and charge transfer originated from the epitaxially prepared bimetallic core-shell structure. Here, we report the experimental results of the direct H₂O₂ synthesis enabled by a strained Au layer grown on Pd nanoparticles. This system can benefit the individual catalytic properties of each involved material, and the heterostructured catalyst displays an improved productivity for the direct synthesis of H₂O₂ by ∼100% relative to existing Pd catalysts. This is explained here by exploring the individual effects of lattice strain and charge transfer on the alteration of the electronic structure of ultrathin Au layers grown on Pd nanoparticles. The approach used in this study can be viewed as a means of designing catalysts with multiple catalytic functions.

Monodisperse ordered indium-palladium nanoparticles: synthesis and role of indium for boosting superior electrocatalytic activity for ethanol oxidation reaction

The slow kinetics of ethanol oxidation reaction (EOR) has limited its widespread use for fuel cells. Bimetallic catalysts with optimized surface compositions can considerably govern rate-determining steps through selectivity for CH3COOH formation or by facilitating the adsorption of OHadsvia the bifunctional effect of an alloy to increase the EOR's kinetic rates. Here, we reported monodisperse ordered In-Pd nanoparticles as new bimetallic high-performance catalysts for EOR. In-Pd nanoparticles, i.e., In3Pd2 and In3Pd5 were prepared using arrested precipitation in solution, and their composition, structures, phase and crystallinity were confirmed using a variety of analyses including TEM, XPS, EDS and XRD. In-Pd nanoparticles were loaded on carbon black (Vulcan XC-72) as electrocatalysts for EOR in alkaline media. In3Pd2 and In3Pd5 nanoparticles exhibited 5.8 times and 4.0 times higher mass activities than commercial Pd/C, which showed that the presence of indium greatly boosts electrocatalytic reactivity for EOR of Pd catalysts. This performance is the best among those of bimetallic nanoparticles reported to date. Such high performance of In-Pd nanoparticles may be attributed to the following two reasons. First, In-Pd nanoparticles exhibited excellent CO anti-poison ability, as confirmed by CO striping experiments. Second, as revealed by DFT calculations of metals with OHads adsorption, In atoms on In3Pd2 surface exhibited the lowest energy (-1.659 eV) for OHads adsorption as compared to other common oxophilic metals including Sn, SnPt, Ag, Ge, Co, Pb, and Cu. We propose that the presence of indium sites promoted efficient free OH radical adsorption on indium sites and resulted in a faster reaction rate of acetate formation from acetaldehyde (the rate determining step for EOR on Pd sites). Finally, a single direct ethanol fuel cell (DEFC) with Pd/C anode was prepared. Compared to the results for a commercial Pd/C anode, the open circuit voltage (OCV) of In3Pd2/C improved by 0.25 V (from 0.64 to 0.89 V) and the power density improved by ∼80% (from 3.7 to 6.7 mW cm-2), demonstrating its practical uses as Pt or Pd catalyst alternatives for DEFC.

Self-recoverable Pd-Ru/TiO2 nanocatalysts with ultrastability towards ethanol electrooxidation

Self-recoverable Pd-Ru/TiO2 nanocatalysts have been prepared by electrochemical stripping of Pd-Ru/TiO2 precursors. For the ethanol oxidation reaction (EOR), these Pd-Ru/TiO2 nanocatalysts are used as an anode catalyst. The characterization of catalysts via chronoamperometry has been repeated 15 times. After 15 stability tests, the Pd1Ru0.69/TiO2 nanocatalysts still achieve a factor of 9.4 enhancement at the residual current density (309.42 mA mgPd-1) for the EOR over commercial Pd/C catalysts (33.01 mA mgPd-1). From the 5th to 15th test, when each 10 000 s stability test is performed in a fresh ethanol electrolyte, the initial and residual current density of the catalysts could recover to the original or even better value in a few hours before performing another 10 000 s stability test. Herein, these Pd-Ru/TiO2 nanocatalysts with ultrastability towards ethanol electrooxidation are self-recoverable. Density functional theory calculations reveal that the introduction of oxophilic metal Ru and a TiO2 support into Pd-based catalysts and the synergistic effects between Ru and TiO2 have led to the ultrastability towards the EOR. The introduction of oxophilic metal Ru and a TiO2 support into catalysts can reduce the adsorption energy of OHads on the Pd-Ru/TiO2 nanocatalysts, and it will inhibit the COads produced and adsorbed on the Pd surface.

Porous PdRh nanobowls: facile synthesis and activity for alkaline ethanol oxidation

Optimizing structure and composition with respect to electrocatalytic performance is critical to achieve outstanding Pd-based electrocatalysts. Herein, we have successfully developed a novel electrocatalyst of hollow and porous PdRh nanobowls (PdRh NBs) for the ethanol oxidation reaction (EOR) by using urea as a guiding surfactant. Under alkaline hydrothermal conditions, urea molecules can release bubbles (NH3 and CO2) that in turn guide the formation of PdRh nanobowls. The porous bowl-like structures of PdRh NBs expose abundant surface sites, which allows for increased collision frequency via confining reactants within open spaces. In regards to composition, the reason for introducing Rh is that not only is the redox potential of Rh approximate with that of Pd (beneficial to the formation of high PdRh alloy phase), but also it can effectively facilitate the breakage of C-C bond on the electrode surface (enhancing the total oxidation of ethanol to CO2). Benefiting from the compositional and structural advantages, the newly developed PdRh NBs exhibit significantly improved electrocatalytic activity for the EOR compared with those of the pure Pd NBs, PdRh nanoparticles (PdRh NPs) and commercial Pd black. These attributes might make them good anodic candidates for application in direct ethanol fuel cells.

Black Phosphorus-Graphene Heterostructure-Supported Pd Nanoparticles with Superior Activity and Stability for Ethanol Electro-oxidation

Rational design supporting material for palladium (Pd)-based catalyst can maximize its electrocatalytic performance for ethanol oxidation reaction (EOR) catalyst in alkaline condition. Utilizing the unique two-dimensional structures and outstanding physicochemical property of graphene and black phosphorus (BP), herein, we proposed and designed a black phosphorus-graphene heterostructure for supporting Pd nanoparticles. Through merely ball-milling of activated graphene (AG) and black phosphorus (BP), the AG-BP hybrid with a linkage of P-C bonding is used as supports of Pd. The obtained Pd/AG-BP hybrid exhibits ultrahigh electrochemical activity toward EOR. Remarkably, it can achieve a high mass peak current density of ∼6004.53 and ∼712.03 mA mg_Pd^-1 before and after the durability tests of 20 000s on EOR, which are ∼7.19 and 80 times higher than those of commercial Pd/C. The experimental analysis and density-functional-theory calculation show that Pd becomes more positive with electrons transfer from Pd to AG-BP supports and is liable to absorb the OH radicals for removing CO_ads intermediate to release active sites on EOR, together with the excellent ability to generate additional OH militants after combining with the AG-BP heterostructure.

Ternary N, S, and P-Doped Hollow Carbon Spheres Derived from Polyphosphazene as Pd Supports for Ethanol Oxidation Reaction

Ethanol oxidation reaction (EOR) is an important electrode reaction in ethanol fuel cells. However, there are many problems with commercial ethanol oxidation electrocatalysts today, such as poor durability, poor anti-CO poisoning ability, and low selectivity for C–C bond cleavage. Therefore, it is very meaningful to develop a high-performance EOR catalyst. Herein, we designed ternary N, S, and P-doped hollow carbon spheres (C–N,P,S) from polyphosphazene (PCCP) as Pd supports for EOR. Using SiO2 spheres as the templates, the PCCP was first coated on the surfaces of SiO2 spheres by in situ polymerization. Through high-temperature pyrolysis and hydrofluoric acid-etching, the hollow PCCP has a large surface area and porous structure. After loading Pd nanoparticles (NPs), the Pd/C–N, P, S catalysts with Pd NPs decorated on the surfaces of C–N, P, S can achieve a high mass peak current density of 1686 mA mgPd−1, which was 2.8 times greater than that of Pd/C. Meanwhile, the Pd/C–N, P, S catalyst also shows a better stability than that of Pd/C after a durability test of 3600s.

Pd-Co nanoalloys nested on CuO nanosheets for efficient electrocatalytic N2 reduction and room-temperature Suzuki-Miyaura coupling reaction

Due to their synergistic and tunable effects, bimetallic alloy systems have recently attracted considerable attention as superior catalysts. Herein, Pd-Co bimetallic alloy nanoparticles were uniformly deposited onto CuO nanosheet supports. This nanostructured catalyst was first shown to be an effective catalyst to convert N2 to NH3 in 0.1 M KOH with a yield of 10.04 μg h-1 mg-1cat. and a faradaic efficiency of 2.16%. The catalyst also performed well in the Suzuki-Miyaura coupling reaction at room temperature without an inert atmosphere and any toxic solvents. Thus, the catalyst is consistent with the principles of green chemistry. Due to the synergistic effects, this bimetallic Pd-Co catalyst shows higher catalytic activity than its monometallic counterparts. Moreover, the Pd/Co ratio was tuned to achieve the best catalytic performance. Finally, the Pd-Co/CuO catalyst presented good stability and recyclability. The superior catalytic activity of the bimetallic alloy catalyst make it an alternative material for catalytic applications in the future.

Electrochemical tuning of Pd100−xAux bimetallics towards ethanol oxidation: effect of an induced d-band center shift and oxophilicity

Electronegative Au improves the oxidation kinetics of Pd by inducing a downshift of the d-band center and increasing the coverage of adsorbed hydroxyls.

Standing Mesochannels: Mesoporous PdCu Films with Vertically Aligned Mesochannels from Nonionic Micellar Solutions

Mesoporous bimetallic palladium (Pd) alloy films with mesochannels perpendicularly aligned to the substrate are expected to show superior electrocatalytic activity and stability. The perpendicular mesochannels allow small molecules to efficiently access the active sites located not only at the surface but also within the film because of low diffusion resistance. When compared to pure Pd films, alloying with a secondary metal such as copper (Cu) is cost-effective and promotes resistance against adventitious poisoning through intermediate reactions known to impair the electrocatalytic performance. Here, we report the synthesis of mesoporous PdCu films by electrochemical deposition in nonionic micellar solutions. The mesoporous structures are vertically aligned on the substrate, and the final content of Pd and Cu can be adjusted by tuning the initial precursor molar ratio in the electrolyte solution.