A Fluorescent Sensor for Dual-Channel Discrimination between Phosgene and a Nerve-Gas Mimic

Chromo-fluorogenic sensors for chemical warfare agents in real-time analysis: journey towards accurate detection and differentiation

The existence of chemical weapons (blister and nerve agents) is an unfortunate reality of the modern world. The usage of these chemical agents by rogue states or terrorist groups has showcased their ugly faces in the past and even in recent years. Despite extensive and strenuous efforts by the Organization for the Prohibition of Chemical Weapons (OPCW) to eliminate chemical warfare agents (CWAs) by the prohibition of their production and the destruction of their stockpiles, many countries still possess them in enormous quantities. Given the potential threat from these lethal agents, it is imperative to have a foolproof chemical sensor and detection system, which should consist of readily deployable chemical probes that can operate with high specificity and sensitivity. Over the last decade, our group has been engaged in designing and developing novel field-deployable sensing techniques by exploring approaches based on supramolecular tools, which can result in excellent specificity, sensitivity, high speed, portability and low cost. In this article, I describe our group's journey and success stories in the development of chemical warfare detection protocols, detailing the range of unique chemical probes and methods explored to achieve the specific detection of individual agents under real environmental conditions. It is interesting to note that the combination of three molecular probes (SQ, Fc and LH2) could simply achieve the detection of all CWAs at room temperature in one go without the need for nonportable and expensive instruments. The ease and generality of these techniques/methods suggest great promise for the highly specific chemical sensing of almost the entire class of CWAs. In this paper, a brief introduction is first provided to present the basic chemistry related to CWAs and the importance of supramolecular chemistry in the design of new protocols with new insights. The manipulation of molecular probes is then debated towards the development of a system for the chromo-fluorogenic sensing of CWAs without interference from most relevant analytes. Finally, the outlook of open challenges and the future developments of this rapidly evolving field is discussed.

Acid is a potential interferent in fluorescent sensing of chemical warfare agent vapors

A common feature of fluorescent sensing materials for detecting chemical warfare agents (CWAs) and simulants is the presence of nitrogen-based groups designed to nucleophilically displace a phosphorus atom substituent, with the reaction causing a measurable fluorescence change. However, such groups are also basic and so sensitive to acid. In this study we show it is critical to disentangle the response of a candidate sensing material to acid and CWA simulant. We report that pyridyl-containing sensing materials designed to react with a CWA gave a strong and rapid increase in fluorescence when exposed to Sarin, which is known to contain hydrofluoric acid. However, when tested against acid-free diethylchlorophosphate and di-iso-propylfluorophosphate, simulants typically used for evaluating novel G-series CWA sensors, there was no change in the fluorescence. In contrast, simulants that had been stored or tested under a standard laboratory conditions all led to strong changes in fluorescence, due to acid impurities. Thus the results provide strong evidence that care needs to be taken when interpreting the results of fluorescence-based solid-state sensing studies of G-series CWAs and their simulants. There are also implications for the application of these pyridyl-based fluorescence and other nucleophilic/basic sensing systems to real-world CWA detection.

Sensitive and Visual Detection of Phosgene by a TICT-Based BODIPY Dye with 8-(o-Hydroxy)aniline as the Active Site

Phosgene and its substitutes (diphosgene and triphosgene) are widely utilized as chemical industrial materials and chemical warfare agents and pose a threat to public health and environmental safety due to their extreme toxicity. Research efforts have been directed to develop selective and sensitive detection methods for phosgene and its substitutes. In this paper, we have prepared two BODIPY-based fluorescent probes, o-Pah and o-Pha, which are two isomers with different active sites, ortho-aminohydroxy (3',4' or 4',3') phenyls at meso position of BODIPY, and compared their sensing performance toward triphosgene. The probe with o-(4'-amino-3'-hydroxyl), o-Pha, exhibits better sensing performance over the o-(3'-amino-4'-hydroxyl), o-Pah, for instance, a lower limit of detection (LOD) (0.34 nm vs. 1.2 nm), and more rapid response (10 s vs. 200 s). Furthermore, based on the above comparative studies, a red-fluorescence probe o-Phae has been constructed through extending 3,5-conjugation of o-Pha. The probe o-Phae displays rapid response (60 s), high sensitivity to triphosgene (LOD=0.88 nm), and high selectivity for triphosgene over relevant analytes including nitric oxide. Finally, a facile test strip for phosgene was fabricated by immobilizing o-Phae in a polyethylene oxide membrane for sensitive (<2 ppm) and selective detection of phosgene in the gas phase.

A facile dual-function fluorescent probe for detection of phosgene and nitrite and its applications in portable chemosensor analysis and food analysis

Due to the potential threats of phosgene and nitrite to public health and safety, in this work, we first proposed the application of a facile dual-function fluorescent probe 2-(1H-Benzimidazol-2-yl)Aniline (BMA) for the detection of phosgene and nitrite in different solvent environments. BMA had fast response (1 min), high selectivity and sensitivity (the limit of detection was 1.27 nM) to phosgene in CH₃CN solution (containing 10% DMSO), which manifested as a ratiometric fluorescent mode from 416 nm to 480 nm. The response of BMA to nitrite in HCl solution (pH = 1, containing 10% CH₃CN) was also highly selective and sensitive (the limit of detection was 60.63 nM), which shown as a turn-off fluorescent mode at 485 nm. In addition, two portable chemosensors (BMA-loaded TLC plates and test strips) had also been successfully manufactured for the detection of phosgene in the gas phase and nitrite in solution, which displayed good responses. Most importantly, BMA had also been successfully used for detection of nitrite in food samples, and a good recovery (88.5%-107.2%) was obtained by adding standard sodium nitrite.

Optical detection of sulfur mustard contaminated surfaces based on a sprayable fluorescent probe

A water-based sprayable functional polymer was immobilized with the fluorescent probe DPXT and was used as a chemo-sensor for rapid localization of surface contamination by sulfur mustard.

Facile synthesis of pyronin-9-thione via a trisulfur radical anion mechanism

A new synthetic methodology to obtain pyronin-9-thione is established. This is the first case of a trisulfur radical anion being involved in CS formation disclosed by both experimental and theoretical investigations.

Bis-heteroleptic Ru(ii) polypyridine complex-based luminescent probes for nerve agent simulant and organophosphate pesticide

Two bis-heteroleptic Ru(ii) complexes of a 4,7-dihydroxy-1,10-phenanthroline ligand were synthesized for the detection of the nerve agent gas mimic, DCP, and the organophosphate pesticide, dichlorvos, through the “off–on” luminescence response.

Selective detection of chemical warfare agents VX and Sarin by the short wavelength inner filter technique (SWIFT)

A novel SWIFT-based strategy for fluorimetric detection of practical amounts (minimal effective dose or lower) of chemical warfare agents is reported. This strategy employs readily available reagents and allows distinguishing between the V and G agents, as well as their discrimination from potential interferents.

Ultrasensitive, Specific, and Rapid Fluorescence Turn-On Nitrite Sensor Enabled by Precisely Modulated Fluorophore Binding

The precise regulation of fluorophore binding sites in an organic probe is of great significance toward the design of fluorescent sensing materials with specific functions. In this study, a probe with specific fluorescence properties and nitrite detection ability is designed by precisely modulating benzothiazole binding sites. Only the fluorophore bond at the ortho-position of the aniline moiety can specifically recognize nitrite, which ensures that the reaction products displays a robust green emission. The unique 2-(2-amino-4-carboxyphenyl) benzothiazole (ortho-BT) shows superior nitrite detection performance, including a low detection limit (2.2 fg), rapid detection time (<5 s), and excellent specificity even in the presence of >40 types of strong redox active, colored substances, nitro compounds, and metal ions. Moreover, the probe is highly applicable for the rapid on-site and semiquantitative measurement of nitrite. The proposed probe design strategy is expected to start a new frontier for the exploration of probe design methodology.

Second-Generation Phosgene and Diphosgene Detection Tube

We have developed a second-generation detection tube for colorimetric and fluorescence detection of phosgene and diphosgene in air. The tube is packed with pellets made of a mixture of microcrystalline cellulose and magnesium aluminum metasilicate treated with a suitable monoterpene (camphor, menthol) to increase porosity and specific surface area. We impregnated the pellets with a specific o-phenylenediamine-pyronin (PY-OPD) based reagent. The detector with this novel indication charge enables phosgene or diphosgene to be selectively and sensitively detected at concentrations lower than as would those posing acute health risk. Owing to the analytical colorimetric and, at the same time, fluorescence signal, the detector is very robust while featuring good sensitivity and variability. The colorimetric limits of detection were 0.3 mg/m3 (tristimulus colorimeter), resp. 5 mg/m3 (with the naked eye), fluorescence detection limits of 0.3 mg/m3 (with the naked eye), all at an air sample volume of 1 dm3. The response was practically immediate, acid vapors and gases, or diethyl chlorophosphate as a simulant of nerve warfare chemical agents, were disruptive.

Selective DCP detection with xanthene derivatives by carbonyl phosphorylation

Rhodamine derivatives (1-2) exhibited dual channel 'turn-on' photophysical signalling selectively with diethyl chlorophosphate (DCP) among various organophosphates (OPs), where the spiro-ring opening corresponds to the adduct formation through phosphorylation at their carbonyl O-_spiro nucleophilic centres.

D-π-A azine based AIEgen with solvent dependent response towards a nerve agent

We developed a D-π-A based unsymmetrical azine molecule 4-((E)-((E)-(4-(dipropylamino)benzylidene)hydrazono)methyl)benzonitrile [DPBN] and studied its optical and aggregation induced emission properties. The DPBN molecule shows good aggregation induced emission (AIE) behaviour with 1157-fold fluorescence enhancement in the aggregated state. In addition to that, both colorimetric as well as fluorometric sensing studies revealed that DPBN selectively detects diethylchlorophosphate (DCP), a potent nerve agent. Interestingly, DPBN shows solvent dependent optical output in the presence of DCPvia two different mechanisms. In the monomer state, it shows red shifted fluorescence enhancement along with color change from colorless to orange color via the formation of a new intramolecular charge transfer state in pure tetrahydrofuran (THF). In the aggregated state, DPBN shows blue shifted emission with fluorescence enhancement in THF-water mixture by protonation at the amine nitrogen centre. Thus, DPBN can be used as a diagnostic measure to selectively detect nerve agents like DCP. This study also paves the way for further development of molecular probes for nerve agents that would represent immense implications in various fields of chemistry and biology.

Sensitive and selective detection of phosgene with a bis-(1H-benzimidazol-2-yl)-based turn-on fluorescent probe in the solution and gas phase

As one of the chemical weapons in World War I, phosgene (COCl2) is an extremely toxic gas. Due to wide applications in industrial production, phosgene can easily leak inadvertently and poses a serious threat to the environment and human health and safety. In this study, we report for the first time a new fluorescent probe (bis-(1H-benzimidazol-2-yl)-methanone) for the rapid detection of phosgene. The probe is based on the easily prepared bis-(1H-benzimidazol-2-yl), which can quickly combine with phosgene to obtain a six-membered cyclic carbamylation product showing fluorescence turn-on. The combination of phosgene caused the maximum absorption of the probe shifting from 361 nm to 373 nm, which showed a color change from colorless to yellow under visible light. Meanwhile, a strong fluorescence emission peak appeared at 428 nm, which showed change from no fluorescence to blue-violet fluorescence under a UV lamp (365 nm). The response of the probe towards phosgene is fast (within 30 s), highly selective and sensitive (the detection limit in solution being 3.3 nM). Furthermore, the portable test strips manufactured using the probe can conveniently perform visual and fluorescence detection of phosgene in the gas phase.

Remarkable improvement in phosgene detection with a defect-engineered phosphorene sensor: first-principles calculations

This paper has addressed the monitoring of phosgene (COCl2) via pristine (BP) and defective (DP) phosphorene monolayer nanosensors at the HSE06/TZVP level of theory. The most stable structures of phosgene preferred planar configurations, which were parallel to the surface. Overall, the defect-engineered nanosensor was highly sensitive (726% gas sensitivity) and reusable (0.31 ns recovery time at room temperature) for phosgene detection. DP was a better work-function sensor of COCl2 compared to BP. The gas response was enhanced by a factor of 54 with vacancy doping. Furthermore, the selectivity of the defect-engineered phosphorene was predicted to be extremely high in both dry and humid air. Such improvements open new opportunities for the rational design of novel and reusable 2D sensors for the detection of toxic COCl2 molecules.

A coumarin based fluorescent chemodosimeter for phosgene gas detection instantaneously in solution and the gas phase

A coumarin based compound, 7-(diethylamino)-2-oxo-2H-chromene-3-carbaldehyde oxime, acts as a selective fluorescent chemodosimeter for phosgene gas in solution and as well as in the gas phase.

Selectively Light-up Detection of Phosgene with an Aggregation-Induced Emission-Based Fluorescent Sensor

Phosgene, a widely used but highly toxic substance, may pose a serious risk to public safety and health because of the potential abuse and possible accidental leakage. Consequently, it is of great significance to develop a rapid, reliable, and sensitive detection method for this noxious agent. In this work, an aggregation-induced emission-based sensor, 3,6-bis(1,2,2-triphenylvinyl)benzene-1,2-diamine (DATPE), has been rationally designed for detecting phosgene by conjugation of o-phenylenediamine (OPD) core as the reactive recognition moiety decorated with two peripheral triphenylethylene (TPE) units. A light-up fluorescence response is achieved by the fast cyclization reaction of OPD part and phosgene along with the formation of 2-imidazolidinone ring, thus inhibiting the intramolecular charge transfer quenching process in the sensor. Moreover, an easy-to-use test paper with DATPE is fabricated for onsite visual detection of phosgene in the gas phase even at a concentration of as low as 0.1 ppm.

Naked-Eye Readout of Analyte-Induced NIR Fluorescence Responses by an Initiation-Input-Transduction Nanoplatform

Fluorescence visualization (FV) in the near-infrared (NIR) window promises to break through the signal-to-background ratio (SBR) bottleneck of traditional visible-light-driven FV methods. However, straightforward NIR-FV has not been realized, owing to the lack of methods to readily transduce NIR responses into instrument-free, naked eye-recognizable outputs. Now, an initiation-input-transduction platform comprising a well-designed NIR fluorophore as the signal initiator and lanthanide-doped nanocrystals as the transducer for facile NIR-FV is presented. The analyte-induced off-on NIR signal serves as a sensitizing switch of transducer visible luminescence for naked-eye readout. The design is demonstrated for portable, quantitative detection of phosgene with significantly improved SBR and sensitivity. By further exploration of initiators, this strategy holds promise to create advanced NIR-FV probes for broad sensing applications.

Far-red/near-infrared emitting, two-photon absorbing, and bio-stable amino-Si-pyronin dyes

Organic fluorophores emitting in the far-red/near-infrared (NIR) wavelength region are in great demand for minimal autofluorescence and reduced light scattering in deep tissue or whole body imaging. Currently, only a few classes of far-red/NIR fluorophores are available including widely used cyanine dyes, which are susceptible to photobleaching and form nonfluorescent aggregates. Even rare are those far-red/NIR emitting dyes that have two-photon imaging capability. Here we report a new class of far-red/NIR-emitting dyes that are photo-stable, very bright, biocompatible, and also two-photon absorbing. The introduction of an electron-withdrawing group such as N-acyl or N-alkoxycarbonyl groups on the C-10-amino substituent of the new julolidine-derived amino-Si-pyronin dyes (ASiPj), which emit in the far-red region, causes large bathochromic shifts, leading to NIR-emitting amino-Si-pyronin dyes (NIR-ASiPj) having high cellular stability. Furthermore, the ASiPj-NIR-ASiPj couple offers a novel ratiometric bioimaging platform with a large spectral gap, as demonstrated here with a boronate-containing NIR-ASiPj derivative that is converted to the corresponding ASiPj dye upon reaction with hydrogen peroxide.

Detection Papers with Chromogenic Chemosensors for Direct Visual Detection and Distinction of Liquid Chemical Warfare Agents

This work provides a summary of our results in the area of the experimental development of detection paper for the detection of liquid phase chemical warfare agents (drops, aerosol), the presence of which is demonstrated by the development of characteristic coloring visible to the naked eye. The basis of the detection paper is a cellulose carrier saturated with the dithienobenzotropone monomer (RM1a)–chromogenic chemosensor sensitive to nerve agents of the G type, blister agent lewisite, or choking agent diphosgene. We achieve a higher coloring brilliance and the limit certain interferences by using this chemosensor in the mix of the o-phenylendiamine-pyronine (PY-OPD). We prove that the addition of the Bromocresol Green pH indicator even enables detection of nerve agents of the V type, or, nitrogen mustards, while keeping a high stability of the detection paper and its functions for other chemical warfare agents. We resolve the resistance against the undesirable influence of water by providing a hydrophobic treatment of the carrier surface.

Sensing Nitrogen Mustard Gas Simulant at the ppb Scale via Selective Dual-Site Activation at Au/Mn3O4 Interfaces

The efficient detection of chemical warfare agents (CWAs), putting at stake human life and global safety, is of paramount importance in the development of reliable sensing devices for safety applications. Herein, we present the fabrication of Mn₃O₄-based nanocomposites containing noble metal particles for the gas-phase detection of a simulant of vesicant nitrogen mustard, i.e., di(propylene glycol) monomethyl ether (DPGME). The target materials were fabricated by chemical vapor deposition of manganese oxide on Al₂O₃ substrates and subsequent functionalization with silver or gold via radio frequency sputtering. The obtained high purity composites, characterized by an intimate metal/oxide contact, yielded an outstanding efficiency in the detection of DPGME. In particular, sensing of the latter analyte with an ultralow detection limit of 0.6 ppb could be performed selectively with respect to other CWA simulants. In addition, the tuneability of selectivity patterns as a function of metal nanoparticle nature paves the way to the development of efficient and selective devices for practical end uses.

Graphene Nanobuds: A New Second-Generation Phosgene Sensor with Ultralow Detection Limit in Aqueous Solution

Selective and sensitive detection of highly toxic chemicals by a suitable, fast, inexpensive, and trustworthy method is vital due to its serious health threats to humankind and breach of public security caused by unexpected terrorist attacks and industrial accidents. Phosgene or carbonyl dichloride is widely employed in many chemical industries and pharmaceuticals, and in pesticide production, which is extremely toxic by severe (short-term) inhalation exposure. Because of the non-existence of a phosgene sensor in aqueous solution and the immense emphasis gained by nanomaterials, especially carbonaceous materials, augmented attention has been given to the development of a fluorophore-functionalized carbon-based method to detect this noxious substance. In this study, surfactant free 1,8-diaminonaphthalene (DAN)-functionalized graphene quantum dots (DAN-GQDs) were prepared to detect phosgene in aqueous solution. The FESEM (field emission scanning electron microscopy) and HRTEM (high-resolution transmission electron microscopy) analyses confirm the as-prepared DAN-GQD morphology as nanobuds (NBs) with an average diameter of ca. 35-40 nm. The crystalline nature, elemental composition, and chemical state of DAN-GQDs were analyzed by standard physiochemical techniques. The edge-termination at the carboxyl functional group of GQDs with DAN was examined by XPS, Raman, FT-IR, and ¹H NMR spectroscopy analyses. The aqueous solution of DAN-GQDs (4.89 × 10^-9 M) exhibits a strong emission peak at 423 nm upon excitation at 328 nm. The addition of the phosgene molecule (0 → 88 μL) quenches the initial fluorescence intensity of DAN-GQDs (Φ_F 53.6 → 34.6%) through the formation of a stable six-membered cyclized product. The DAN-GQDs displayed excellent selectivity and sensitivity for phosgene ( K_a = 3.84 × 10² M^-1 and LoD (limit of detection) = 2.26 ppb) over other competing toxic pollutants in water. The time-resolved fluorescence analysis confirms that the quenching of DAN-GQDs follows nonradiative relaxation of excited electrons. Furthermore, bioimaging experiments of phosgene in living human breast cancer (HeLa) cells and cell viability test successfully demonstrated the practicability of DAN-GQDs.

A flavonoid-based fluorescent test strip for sensitive and selective detection of a gaseous nerve agent simulant

Developing fluorescent sensors with ability of monitoring gaseous nerve agents in a sensitive and selective manner is of great importance due to the extreme toxicity and volatility of organophosphorus nerve agents. Herein we reported a novel oxime-modified flavonoid sensor and carefully investigated its sensing behavior towards nerve agent simulants, diethylchlorophosphate (DCP). In the presence of DCP, a remarkable fluorescence enhancement accompanied with emission color change could be observed by naked eyes in solution. The response time was less than 90 s and LOD value was calculated as 0.78 μmol/L in solution. The sensing mechanism could be ascribed to the specific reaction between halophosphate and hydroxyl group of oxime. Furthermore, sensor strips have been successfully constructed by using PEG as matrix with a simple preparation process, and also achieved the sensitive and selective detection of DCP vapor. These results in this study may provide important references for further design of dye-based sensor strips for detection of nerve agents both in solution and gas phase.

Ultrasensitive Detection of Sulfur Mustard via Differential Noncovalent Interactions

In this work, we fabricate two types of hierarchical microspheres, i.e., one coassembled from two fluorene-based oligomers (1 and 2) and one self-assembled from a fluorene-based oligomer (1), for ultrasensitive and selective detection of trace sulfur mustard (SM) vapor. On the basis of distinct fluorescence responses of 1-2 coassembled and individual 1 hierarchical microspheres that originate from differential noncovalent interactions between analytes and these sensors, SM vapor can be ultrasensitively detected (30 ppb) and easily discriminated from various sulfides and other potential interferents. Our work that utilizes differential noncovalent interactions to give sensitive and selective fluorescence response patterns represents a new detection approach for SM and other hazardous chemicals.

Fluorescent Chemosensor for Dual-Channel Discrimination between Phosgene and Triphosgene

As highly toxic and accessible chemical reagents, phosgene and triphosgene have become a serious threat to public safety. So, it is highly desirable to develop facile methods to detect and recognize them. In this article, a novel fluorescent chemosensor, Phos-4, has been constructed with 1,8-naphthalimide as the fluorophore and 2-(2-aminophenyl)imidazol as the recognition sites for discrimination between phosgene and triphosgene in a dual-channel mode for the first time. Owing to the difference in electrophilicity between chlorocarbonyl and trichloromethoxycarbonyl, the sensing reaction of Phos-4 with phosgene undergoes two carbamylations to afford a cyclic product with green fluorescence, and only one carbamylation occurs for triphosgene to form a noncyclic product with blue fluorescence. The sensor Phos-4 exhibits high sensitivity (the limit of detection, 3.2 nM, for phosgene, and 1.9 nM, for triphosgene) and high selectivity in solutions. Furthermore, facile test papers containing Phos-4-embedded nanofibrous membrane have been fabricated by the electrospinning technology. The test papers can provide visual and selective detection of phosgene with a lower limit of detection (42 ppb) and a faster response (≤10 s) in the gas phase over those in solutions. The test paper with Phos-4 is promising to be a practical detection tool of gaseous phosgene.

Organoiridium(III) Complexes as Luminescence Color Switching Probes for Selective Detection of Nerve Agent Simulant in Solution and Vapor Phase

In this work, cationic organoiridium(III) complex based photoluminescent (PL) probes have been developed to selectively detect the chemical warfare nerve agent mimic, diethyl chlorophosphate(DCP) at nanomolar range by distinct bright green to orange-red luminescence color switching (on-off-on) in solution as well as in the vapor phase. Interference of other chemical warfare agents (CWAs) and their mimics was not observed either by PL spectroscopy or with the naked-eye in solution and gas phase. The detection was attained via a simultaneous nucleophilic attack of two -OH groups of the 4,7-dihydroxy-1,10-phenanthroline ligand with DCP by forming bulkier phosphotriester. The detailed reaction mechanism was established through extensive ¹H NMR titration, ³¹P NMR, and ESI-MS analysis. Finally, a test paper strip and solid poly(ethylene oxide) (PEO) film with iridium(III) complex 1[PF₆] were fabricated for the vapor-phase detection of DCP. The solution and vapor-phase detection properties of these luminescent Ir(III) complexes can offer a worthy approach into the design of new metal complex based PL switching probes for chemical warfare agents.

Facile detection of organophosphorus nerve agent mimic (DCP) through a new quinoline-based ratiometric switch

Here a new quinoline-based (BIMQ) probe was developed which displayed ratiometric detection of organophosphorus chemical vapor threat, DCP.

A paper-based chemosensor for highly specific, ultrasensitive, and instantaneous visual detection of toxic phosgene

A chemosensor containing an o-hydroxyaniline unit as the reaction site was developed for colorimetric and fluorimetric detection of phosgene, which showed fast response (15 s), high specificity, and an extremely low detection limit.

Functional synthetic probes for selective targeting and multi-analyte detection and imaging

In contrast to the classical design of a probe with one binding site to target one specific analyte, probes with multiple interaction sites or, alternatively, with single sites promoting tandem reactions to target one or multiple analytes, have been developed. They have been used in addressing the inherent challenges of selective targeting in the presence of structurally similar compounds and in complex matrices, as well as the visualization of the in vivo interaction or crosstalk between the analytes. Examples of analytes include reactive sulfur species, reactive oxygen species, nucleotides and enzymes. This review focuses on recent innovations in probe design, detection mechanisms and the investigation of biological processes. The vision is to promote the ongoing development of fluorescent probes to enable deeper insight into the physiology of bioactive analytes.

A potent colorimetric and fluorogenic phosgene probe based on dual photophysical processes: PET attenuation and ICT reversal

An easily obtainable pyrene benzothiazole platform for the selective detection of hazardous analyte phosgene simply via quaternization of the benzothiazole N atom, which precludes any ring opening or closure.

Fluorescent Chemosensors for Various Analytes Including Reactive Oxygen Species, Biothiol, Metal Ions, and Toxic Gases

The development of fluorescent chemosensors for various analytes has been actively pursued by chemists. Since their inception, these efforts have led to many new sensors that have found wide applications in the fields of chemistry, biology, environmental science, and physiology. The search for fluorescent chemosensors was initiated by a few pioneering groups in the late 1970s and 1980s and blossomed during the last two decades to include more than hundreds of research groups around the world. The targets for these sensors vary from metal ions, anions, reactive oxygen/nitrogen species, biothiols, and toxic gases. Our group has made contributions to this area in last 18 years. In this perspective, we briefly introduce the history of chemosensors and review studies that we have carried out.

An Optical Dosimeter for the Selective Detection of Gaseous Phosgene with Ultralow Detection Limit

We present here a cheap, fast, and highly selective dosimeter for the colorimetric detection of gaseous phosgene with an ultralow detection limit. The disposable device is based on Harrison's reagent supported into a porous nanocrystalline TiO₂ matrix film. We exposed the films to phosgene streams while the absorbance was monitored by an optic fiber in a gas chamber. The pronounced spectral changes were unaffected by humidity and oxygen and permitted us to use the response rate at 464 nm as a very stable calibration signal for quantitative analysis purposes. The use of a specific sensing reaction guaranteed a very high selectivity of the device even against saturated vapors of primary interferences like halide gases and other oxidizing and volatile agents. With this simple method, whose response is compatible with affordable and efficient miniature LED-photodiode devices, we reach an ultralow limit of detection well below the ppm level.

Fast and Ultrasensitive Detection of a Nerve Agent Simulant Using Carbazole-Based Nanofibers with Amplified Ratiometric Fluorescence Responses

In this work, we report the fast and ultrasensitive detection of a nerve agent simulant in the gas phase, diethyl chlorophosphate (DCP), by using carbazole-based nanofibers from 1. When exposed to trace DCP, the formed pyridine-phosphorylated product in 1 nanofibers can cause amplified ratiometric fluorescence responses, i.e., amplified fluorescence quenching via quenching excitons within the diffusion length of 1 nanofibers and simultaneously amplified turn-on fluorescence responses via harvesting excitons within the diffusion length to give the intramolecular charge transfer (ICT) emission at a longer wavelength. On the basis of these amplified ratiometric fluorescence responses, detection of DCP with fast response (ca. 3 s), ultrasensitivity (4 ppb), and improved selectivity is achieved.