Potassium‐Ion‐Assisted Regeneration of Active Cyano Groups in Carbon Nitride Nanoribbons: Visible‐Light‐Driven Photocatalytic Nitrogen Reduction

New Strategy for the Persistent Photocatalytic Reduction of U(VI): Utilization and Storage of Solar Energy in K+ and Cyano Co-Decorated Poly(Heptazine Imide)

The photocatalytic conversion of soluble U(VI) into insoluble U(IV) is a robust strategy to harvest aqueous uranium, but remains challenging owing to the intermittent availability of solar influx and reoxidation of U(IV) without illumination. Herein, a dual platform based on K+ and cyano group co-decorated poly(heptazine imide) (K-CN-PHI) is reported that can drive persistent U(VI) extraction upon/beyond light. K-CN-PHI achieves the photocatalytic reduction of U(VI) with a reaction rate of 0.89 min-1 , being 47 times greater than that over pristine carbon nitride (PCN). This system can further be triggered by light to form long-living radicals, driving the reduction of U(VI) in the dark for over 3 d. The flexible structural K+ as counterions stabilize the electrons trapped by cyanamide groups, enabling the long lifetime of the generated radicals. The results collectively prove K-CN-PHI to be a novel and efficient photocatalyst enabling persistent U(VI) extraction around the clock, and broadening the practical applications of the photocatalytic extraction of U(VI).

Generation Mechanism of the Defects in g-C3N4 Synthesized in N2 Atmosphere and the Method for Improving Photocatalysis Activity

One of the most important methods for modifying semiconductors is defect engineering, but only the right quantity of defects in the right chemical environment can produce desirable results. Heat treatment processes associated with g-C3N4 are occasionally carried out in N2 atmosphere, however, the catalytic performance of g-C3N4 produced by direct condensation of only nitrogen-rich precursors in N2 atmosphere is often unsatisfactory. This is typically attributed to the introduction of numerous defects, but the actual relationship between the formation of defects and the N2 atmosphere is rarely explained, and the resulting quantity of defects is difficult to control. We propose that the melam to melem transition is restricted due to the lack of O2 during the heat treatment of the nitrogen-rich precursor of g-C3N4 in N2 atmosphere, which leads to a substantial quantity of defects in the synthesized g-C3N4. To enhance its photocatalytic property, we propose a method to reduce the quantity of defects due to calcinating in N2 atmosphere by protonating the precursor in a way that increases the polymerization of the product. The test analysis indicated that only a moderate quantity of defects that contribute to electron excitation and enhance the separation efficiency and density of photogenerated carriers were retained, and the hydrogen evolution performance of the prepared catalyst was significantly improved.

A novel g-C3N4/g-C3N4-x homojunction with efficient interfacial charge transfer for photocatalytic degradation of atrazine and tetracycline

The abuse of pesticides and antibiotics and their harm to the environment are the disadvantages of modern agriculture and breeding industry. g-C₃N₄ has shown great potential in photocatalytic water pollution purification under visible light irradiation, however, the conventional g-C₃N₄ suffers from the disadvantage of limited optical absorption and serious charge recombination, resulting in inefficient light energy conversion and pollutant degradation. This study provides a strategy of combining defect engineering with a built-in electric field to prepare homojunction a photocatalyst with high optical absorption rate and charge separation efficiency. Experiments and DFT simulation revealed the mechanism of significant improvement in the photocatalytic performance of the prepared catalyst, and proposed the pollutant degradation pathway. In addition, the photocatalytic effects of the prepared catalysts on different natural water bodies, natural light, and various water conditions were investigated, revealing the applicability of the catalysts in the purification of pollutants in various water environments.

Optical control of neuronal activities with photoswitchable nanovesicles

Precise modulation of neuronal activity by neuroactive molecules is essential for understanding brain circuits and behavior. However, tools for highly controllable molecular release are lacking. Here, we developed a photoswitchable nanovesicle with azobenzene-containing phosphatidylcholine (azo-PC), coined 'azosome', for neuromodulation. Irradiation with 365 nm light triggers the trans-to-cis isomerization of azo-PC, resulting in a disordered lipid bilayer with decreased thickness and cargo release. Irradiation with 455 nm light induces reverse isomerization and switches the release off. Real-time fluorescence imaging shows controllable and repeatable cargo release within seconds (< 3 s). Importantly, we demonstrate that SKF-81297, a dopamine D1-receptor agonist, can be repeatedly released from the azosome to activate cultures of primary striatal neurons. Azosome shows promise for precise optical control over the molecular release and can be a valuable tool for molecular neuroscience studies.

Photoreduction behavior of Cr(VI) on oxidized carbon nanoparticles: From photocatalytic efficiency to oxygenated groups

Clarifying the reaction process and specific mechanism between variable-valence elements and oxidized carbon nanoparticles is essential to evaluate the environmental impact of carbon nanomaterials. In this study, the photocatalytic reduction of Cr(VI) on oxidized carbon nanotubes (OCNTs), oxidized graphene ribbons (OGRs), and graphene oxide sheets (GOs) was explored by batch experiments and spectroscopic analyses. The reaction efficiencies strongly depended on the number of oxygenated groups in the oxidized carbon nanoparticles. The abundant oxygenated groups enabled the GOs to exhibit the highest photocatalytic activity, followed by the OGRs and OCNTs. As a result, the photoreduction efficiency of Cr(VI) reached 96% for GOs, whereas those of OGRs and OCNTs were only 40% and 13%, respectively. In addition, different types of oxygenated groups exhibited various activities based on molecular model tests, following the sequence carboxylic > hydroxyl > carbonyl > ether > aldehyde > edge. Based on the underlying relationship between the oxygenated groups, topological structures, and mechanical strain in the carbon nanoparticles, we speculate that mechanical strain plays a critical role in the formation of oxygenated groups, thereby regulating their photocatalytic activities. The findings in this work provide novel insights into the roles of oxygenated groups and the mechanical strain of carbon nanoparticles in their environmental behavior.

Incorporating Ni-Polyoxometalate into the S-Scheme Heterojunction to Accelerate Charge Separation and Resist Photocorrosion for Promoting Photocatalytic Activity and Stability

The emerging polyoxometalate (POM) nanomaterials are transition metal oxygen anion clusters with d⁰ electronic configurations, which could be attractive and potential photocatalysts. Hence, a nickel (Ni)-substituted polyoxometalate K₆Na₄[Ni₄(H₂O)₂(PW₉O₃₄)₂]·32H₂O (Ni₄POM)-incorporating step (S)-scheme heterojunction was developed to promote photocatalytic activity and stability in H₂ and H₂O₂ production. The multielectron transfer through variable valence metal centers in Ni₄POM would facilitate the recombination of invalid charges through the S-scheme pathway. Moreover, incorporating Ni₄POM into the S-scheme heterojunction can broaden the light absorption range and meanwhile lead to resistance to photocorrosion to promote the optical and chemical stability of Cd_0.5Zn_0.5S (CZS). The optimized CZSNi-70 exhibited a H₂ evolution rate of 42.32 mmol g^-1 h^-1 under visible-light irradiation with an apparent quantum yield of 32.27% at 420 nm and a H₂O₂ production rate of 295.4 μmol L^-1 h^-1 under 420 nm light-emitting diode irradiation. This work can provide a new view for the development of transition metal-substituted POM-based stable and efficient S-scheme photocatalysts.

Tuning Photoactive MIL-68(In) by Functionalized Ligands for Boosting Visible-Light Nitrogen Fixation

In this work, MIL-68(In) functionalized with various ligand substitutions including amine, hydroxyl, bromine, nitro, and methyl groups was prepared, via a one-pot solvothermal reaction for visible-light photocatalytic ammonia synthesis. The diversity of ligands tunes the morphology, geometry, pore environment, and electronic structure of MIL-68(In)-based photocatalysts due to the polarity and intraframework interactions. Amine-inserted MIL-68(In) outperforms its counterparts, presenting a boosted nitrogen photofixation rate of 140.34 μmol g_cat^-1 h^-1 with an apparent quantum efficiency of 5.69% at 420 nm. Further, the size of the batch solvothermal reactor and the amine group content also influence the photocatalytic activity. The combined experimental and theoretical results reveal that amine substituents improve the chemisorption of nitrogen molecules and the conversion of nitrogen into ammonia follows a dual pathway, i.e., a Mars-van Krevelen process and a ligand-to-metal charge transfer mechanism. This work provides a molecular engineering strategy via dual catalysis toward efficient ammonia production.

Atomically dispersed Mn boosting photoelectrochemical SARS-CoV-2 spike protein immunosensing on carbon nitride

The sudden outbreak of coronavirus disease (COVID-19) triggered by SARS-CoV-2 infection has created a terrifying situation around the world. The spike protein of SARS-CoV-2 can act as an early biomarker for COVID-19. Therefore, controlling the spread of COVID-19 requires a low-cost, fast-response, and sensitive monitoring technique of spike protein. Herein, a photoelectrochemical (PEC) immunosensor for the detection of spike protein was constructed using the nanobody and an Mn (Ⅱ) modified graphitic carbon nitride (Mn/g-C₃N₄). The introduction of atomically dispersed Mn (Ⅱ) can accelerate the effective transfer and separation of photogenerated electron-hole pairs, which significantly boosts PEC performance of g-C₃N₄, thereby improving the detection sensitivity. As a recognition site, nanobody can achieve high-affinity binding to the spike protein, leading to a high sensitivity. The linear detection range of the proposed PEC immunosensor was 75 fg mL^-1 to 150 pg mL^-1, and the limit of detection was calculated to be 1.22 fg mL^-1. This stable and feasible PEC immunosensor would be a promising diagnostic tool for sensitively detecting spike protein of SARS-CoV-2.

Facile Chemical Vapor Modification Strategy to Construct Surface Cyano-Rich Polymer Carbon Nitrides for Highly Efficient Photocatalytic H2 Evolution

The surface grafting of electro-negative cyano groups on polymer carbon nitrides (PCNs) is an effective way to tail their electronic structure. Despite the significant progress in the synthesis of cyano group-enriched PCN, developing a simple and efficient method remains challenging. Here, a facile strategy was developed for fabricating surface cyano-rich PCN (PCN-DM) with a porous structure via chemical vapor modification using diaminomaleonitrile. The cyano groups of diaminomaleonitrile substituted the amino groups on PCN surface via a deamination. The hydrogen production rate of the PCN-DM was approximately 17 times higher than that of pristine PCN. This significant increase in photocatalytic performance could be assigned to the fusion of cyano groups in the surface of PCN, forming new gap states that broadened the visible-light harvesting and accelerated charge separation for photoredox reactions. This study unveils a promising approach for incorporating functional units in the design of novel photocatalysts for efficient hydrogen production.

Promoting the Oxygen Evolution Reaction via Morphological Manipulation of a Lamellar Nanorod-Assembled Ni(II)-Pyrazolate Superstructure

Nanoscale pyrazolate-based coordination polymers (CPs) are becoming increasingly popular as electrocatalysts owing to their customizable compositions and structures. However, using them for oxygen evolution reaction (OER) is highly challenging due to their unsatisfactory catalytic efficiency and relatively low stability. Herein, a simple one-step solvothermal process was employed for the fabrication of polycrystalline nickel-pyrazolate [Ni(Pz)] with an unusual lamellar nanorod-assembled microsphere morphology for the first time using ethanol as a green organic solvent via controlling other physical parameters. Meanwhile, the Ni(Pz) structure and morphology are investigated to derive its formation process following the different monomeric feed ratios relying on the metal/ligand interactions of CP. Shaping the Ni(Pz) electrocatalyst in well-oriented lamellar nanorod-assembled microspheres brings the advantage of porosity and high specific surface area, which expedites mass/charge transport and contact with the electrolyte as well as creates less tortuous pathways for charge distribution, thus improving the charge homogeneity. These high-class structural features and polycrystalline nature of Ni(Pz)-E-PVP facilitate amazing catalytic OER activity with a low overpotential of 290 mV at 10 mA cm^-2 and a Tafel slope of only 94 mV dec^-1 beyond the yardstick material (i.e., RuO₂) in alkaline solution. A suite of measurements, entailing X-ray photoelectron spectroscopy and density functional theory calculations, suggest that the rich Ni-N₄ moieties in Ni(Pz)-E-PVP are central species providing adsorption sites for OER intermediates. This facile protocol is prophesied to commence the imminent development of noble metal-free, effective, and low-priced electrocatalysts for OER.

Electrochemical Generation of Catalytically Active Edge Sites in C2 N-Type Carbon Materials for Artificial Nitrogen Fixation

The electrochemical nitrogen reduction reaction (NRR) to ammonia (NH₃ ) is a potentially carbon-neutral and decentralized supplement to the established Haber-Bosch process. Catalytic activation of the highly stable dinitrogen molecules remains a great challenge. Especially metal-free nitrogen-doped carbon catalysts do not often reach the desired selectivity and ammonia production rates due to their low concentration of NRR active sites and possible instability of heteroatoms under electrochemical potential, which can even contribute to false positive results. In this context, the electrochemical activation of nitrogen-doped carbon electrocatalysts is an attractive, but not yet established method to create NRR catalytic sites. Herein, a metal-free C₂ N material (HAT-700) is electrochemically etched prior to application in NRR to form active edge-sites originating from the removal of terminal nitrile groups. Resulting activated metal-free HAT-700-A shows remarkable catalytic activity in electrochemical nitrogen fixation with a maximum Faradaic efficiency of 11.4% and NH₃ yield of 5.86 µg mg^-1 _cat h^-1 . Experimental results and theoretical calculations are combined, and it is proposed that carbon radicals formed during activation together with adjacent pyridinic nitrogen atoms play a crucial role in nitrogen adsorption and activation. The results demonstrate the possibility to create catalytically active sites on purpose by etching labile functional groups prior to NRR.

Synthesis of Porous Carbon Nitride Nanobelts for Efficient Photocatalytic Reduction of CO2

Sustainable conversion of CO₂ to fuels using solar energy is highly attractive for fuel production. This work focuses on the synthesis of porous graphitic carbon nitride nanobelt catalyst (PN-g-C₃N₄) and its capability of photocatalytic CO₂ reduction. The surface area increased from 6.5 m²·g^-1 (graphitic carbon nitride, g-C₃N₄) to 32.94 m²·g^-1 (PN-g-C₃N₄). C≡N groups and vacant N_2C were introduced on the surface. PN-g-C₃N₄ possessed higher absorbability of visible light and excellent photocatalytic activity, which was 5.7 and 6.3 times of g-C₃N₄ under visible light and simulated sunlight illumination, respectively. The enhanced photocatalytic activity may be owing to the porous nanobelt structure, enhanced absorbability of visible light, and surface vacant N-sites. It is expected that PN-g-C₃N₄ would be a promising candidate for CO₂ photocatalytic conversion.

Polarized Cu-Bi Site Pairs for Non-Covalent to Covalent Interaction Tuning toward N2 Photoreduction

A universal atomic layer confined doping strategy is developed to prepare Bi₂₄ O₃₁ Br₁₀ materials incorporating isolated Cu atoms. The local polarization can be created along the CuOBi atomic interface, which enables better electron delocalization for effective N₂ activation. The optimized Cu-Bi₂₄ O₃₁ Br₁₀ atomic layers show 5.3× and 88.2× improved photocatalytic nitrogen fixation activity than Bi₂₄ O₃₁ Br₁₀ atomic layer and bulk Bi₂₄ O₃₁ Br₁₀ , respectively, with the NH₃ generation rate reaching 291.1 µmol g^-1 h^-1 in pure water. The polarized Cu-Bi site pairs can increase the non-covalent interaction between the catalyst's surface and N₂ molecules, then further weaken the covalent bond order in NN. As a result, the hydrogenation pathways can be altered from the associative distal pathway for Bi₂₄ O₃₁ Br₁₀ to the alternating pathway for Cu-Bi₂₄ O₃₁ Br₁₀ . This strategy provides an accessible pathway for designing polarized metal site pairs or tuning the non-covalent interaction and covalent bond order.

The development of catalysts for electrochemical nitrogen reduction toward ammonia: theoretical and experimental advances

Ammonia (NH₃) is essential for the industrial production of fertilizers, pharmaceuticals, plastics, synthetic fibers, resins, and chemicals, and it is also a promising carbon-free energy carrier. The electrocatalytic nitrogen reduction reaction (eNRR) driven by renewable energy sources at ambient temperature and atmospheric pressure is an alternative approach to the Haber-Bosch process for NH₃ synthesis. However, the efficient electrocatalytic reduction of nitrogen (N₂) to NH₃ is challenging due to the lack of effective electrocatalysts. Tremendous effort has been made to develop high-performance electrocatalysts for the eNRR in the past few years. In this review, we summarize recent progress relating to electrocatalysts for the eNRR from both theoretical and experimental aspects. Remaining challenges and perspectives for promoting the eNRR to generate NH₃ are also discussed. This review hopes to guide the design and development of efficient electrocatalysts for the eNRR for NH₃ synthesis.

Host-induced alteration of the neighbors of single platinum atoms enables selective and stable hydrogenation of butadiene

Tuning the coordination neighbors of the metal center is emerging as an elegant approach to manipulating the performance of supported single-atom catalysts in heterogeneous catalysis. Herein, atomically dispersed Pt species with different coordination neighbors hosted on nitrogen-doped carbon (NC) and graphitic carbon nitride (C₃N₄) are constructed through an impregnation-activation approach. Advanced characterization techniques including X-ray electron microscopy, X-ray absorption spectroscopy, and high angle annular dark-field scanning transmission electron microscopy reveal the different nature of active sites induced by the hosts: i.e., the Pt-N_x configuration in NC but both Pt-N and Pt-O coordinations in C₃N₄. H₂-D₂ exchange experiments and electron microscopy further evidence that Pt/NC exhibits a high propensity for H₂ splitting and high thermal stability of the Pt species against agglomeration, whereas Pt/C₃N₄ cannot dissociate H₂ and the Pt atoms easily aggregate in the reductive stream. Consequently, when applied in the selective hydrogenation of 1,3-butadiene, Pt/NC exhibits higher selectivity to butenes and excellent stability, but Pt/C₃N₄ behaves as a nanoparticle analogue favoring deep hydrogenation. The superior selectivity patterns of the single Pt atoms over Pt nanoparticles are rationalized by the inversed adsorption strength between the H₂ and 1,3-butadiene molecules at different metal sites, which is substantiated by the kinetic studies.

Covalent Triazine Frameworks with Defective Accumulation Sites: Exceptionally Modulated Electronic Structure for Solar-Driven Oxidative Activation of Peroxymonosulfate

Precisely tailoring the electronic structure and surface chemistry of metal-free covalent triazine frameworks (CTFs) for efficient photoactivation of oxyanions is environmentally desirable but still challenging. Of interest to us in this work was to construct artificial defective accumulation sites into a CTF network (CTF-SD_x) to synchronously modulate both thermodynamic (e.g., band structure) and kinetic (e.g., charge separation/transfer/utilization and surface adsorption) behaviors and probe how the transformation affected the subsequent activation mechanism of peroxymonosulfate (PMS). With the incorporation of terminal cyano (-CN) groups and boron (B) dopants, the delocalized CTF-SD underwent a narrowed electronic energy gap for increased optical absorption as well as a downshifted valence band position for enhanced oxidation capacity. Moreover, the localized charge accumulation regions induced by the electron-withdrawing -CN groups facilitated the exciton dissociation process, while the adjacent electron-deficient areas enabled strong affinity toward PMS molecules. All of these merits impelled the photoactivation reaction with PMS, and a 15-fold enhancement of bisphenol-A (BPA) removal was found in the CTF-SD₂/PMS/vis system compared with the corresponding pristine CTF system. Mechanistic investigations demonstrated that this system decomposed organics primarily through a singlet oxygen-mediated nonradical process, which originated from PMS oxidative activation over photoinduced holes initiated by an electron transfer process, thereby opening a new avenue for designing an efficient PMS activation strategy for the selective oxidation of organic pollutants.

Recent Advances in Application of Graphitic Carbon Nitride-Based Catalysts for Photocatalytic Nitrogen Fixation

Ammonia, the second most-produced chemical, is widely used in agricultural and industrial applications. However, traditional industrial ammonia production dominated by the Haber-Bosch process presents huge resource and environment issues due to the massive energy consumption and CO₂ emission. The newly emerged nitrogen fixation technology, photocatalytic N₂ reduction reaction (p-NRR), uses clean solar energy with zero-emission, holding great prospect to achieve sustainable ammonia synthesis. Although great efforts are made, the p-NRR catalysts still suffer from poor N₂ adsorption and activation, inferior light absorption, and fast recombination of photocarriers. Due to the tunable electronic structure of the metal-free polymeric graphitic carbon nitride (g-C₃ N₄ ), the above-mentioned issues can be significantly alleviated, making it the most promising p-NRR photocatalyst. This review summarizes the recent development of g-C₃ N₄ -based catalysts for p-NRR, including the working principle of p-NRR catalysts, the challenges of developing p-NRR catalysts, and corresponding solutions. Particularly, the roles of defect engineering and heterojunction construction on g-C₃ N₄ to the enhancement of photocatalytic performances are emphasized. In addition, computational studies are introduced to deepen the understanding of reaction pathways. At last, perspectives are provided on the development of p-NRR catalysts.

Synergy of cyano groups and cobalt single atoms in graphitic carbon nitride for enhanced bio-denitrification

Bio-denitrification plays a crucial role in the purification of nitrogen contaminated water, yet the low efficiency of the pure biological system often leads to the accumulation of harmful intermediates. Semi-biological catalysis provides an effective approach to improving the reaction efficiency through hybridizing artificial nanomaterials with natural organisms, yet the application of this strategy in bio-denitrification is limited. In this study, the effect of surface engineered carbon nitride on the denitrification capability of denitrifying bacteria was investigated. We found that cyano groups availed the biotic-abiotic interactions, while immobilized cobalt single atoms attenuated the local electrostatic repulsion. This synergistic effect endowed carbon nitride modified with cobalt atoms and cyano groups (Co/C₃N₄-C) with the unexpected acceleration of bio-denitrification reaction, without the accumulation of harmful intermediates. According to the metabolomics analysis, this improvement was attributed to the moderate metabolic adaptation caused by nanoelicitor, which induced dramatically boosted electron transfer and energy supply for extracellular polymeric substance (EPS) secretion. The elevation of intracellular iron level increased the activities of denitrification reductase, which was evidenced by metatranscriptomic analysis. Our results not only demonstrate the great potential of carbon nitride as an artificial elicitor for biological regulation, but also shed light on comprehending the complicated biotic-abiotic interactions for versatile application.

Enhanced H2O2 Production via Photocatalytic O2 Reduction over Structurally-Modified Poly(heptazine imide)

Solar H₂O₂ produced by O₂ reduction provides a green, efficient, and ecological alternative to the industrial anthraquinone process and H₂/O₂ direct-synthesis. We report efficient photocatalytic H₂O₂ production at a rate of 73.4 mM h^-1 in the presence of a sacrificial donor on a structurally engineered catalyst, alkali metal-halide modulated poly(heptazine imide) (MX → PHI). The reported H₂O₂ production is nearly 150 and >4250 times higher than triazine structured pristine carbon nitride under UV-visible and visible light (≥400 nm) irradiation, respectively. Furthermore, the solar H₂O₂ production rate on MX → PHI is higher than most of the previously reported carbon nitride (triazine, tri-s-triazine), metal oxides, metal sulfides, and other metal-organic photocatalysts. A record high AQY of 96% at 365 nm and 21% at 450 nm was observed. We find that structural modulation by alkali metal-halides results in a highly photoactive MX → PHI catalyst which has a broader light absorption range, enhanced light absorption ability, tailored bandgap, and a tunable band edge position. Moreover, this material has a different polymeric structure, high O₂ trapping ability, interlayer intercalation, as well as surface decoration of alkali metals. The specific C≡N groups and surface defects, generated by intercalated MX, were also considered as potential contributors to the separation of photoinduced electron-hole pairs, leading to enhanced photocatalytic activity. A synergy of all these factors contributes to a higher H₂O₂ production rate. Spectroscopic data help us to rationalize the exceptional photochemical performance and structural characteristics of MX → PHI.

Covalent Triazine Frameworks and Porous Carbons: Perspective from an Azulene-Based Case

Covalent triazine frameworks (CTFs) are among the most valuable frameworks owing to many fantastic properties. However, molten salt-involved preparation of CTFs at 400-600 °C causes debate on whether CTFs represent organic frameworks or carbon. Herein, new CTFs based on the 1,3-dicyanoazulene monomer (CTF-Azs) are synthesized using molten ZnCl₂ at 400-600 °C. Chemical structure analysis reveals that the CTF-Az prepared at low temperature (400 °C) exhibits polymeric features, whereas those prepared at high temperatures (600 °C) exhibit typical carbon features. Even after being treated at even higher temperatures, the CTF-Azs retain their rich porosity, but the polymeric features vanish. Although structural de-conformation is a widely accepted outcome in polymer-to-carbon rearrangement processes, the study evaluates such processes in the context of CTF systems. A proof-of-concept study is performed, observing that the as-synthesized CTF-Azs exhibit promising performance as cathodes for Li- and K-ion batteries. Moreover, the as-prepared NPCs exhibit excellent catalytic oxygen reduction reaction (ORR) performance; hence, they can be used as air cathodes in Zn-air batteries. This study not only provides new building blocks for novel CTFs with controllable polymer/carbon features but also offers insights into the formation and structure transformation history of CTFs during thermal treatment.

Transition Metals Embedded Two-Dimensional Square Tetrafluorotetracyanoquinodimethane Monolayers as a Class of Novel Electrocatalysts for Nitrogen Reduction Reaction

The combination of transition metal (TM) atoms and high electron affinity organic framework tetrafluorotetracyanoquinodimethanes (F₄TCNQs) makes the TM-embedded two-dimensional (2D) square F₄TCNQ monolayers (TM-sF₄TCNQ) possible to have excellent characteristics of single-atom catalysts and 2D materials. For the first time, the TM-sF₄TCNQ monolayers have been considered for application in the electrocatalytic nitrogen reduction reaction (eNRR) field. Through high-throughput screening, the catalytic performance of 30 TM-sF₄TCNQ (TM = 3d∼5d TMs) monolayers for eNRR was comprehensively evaluated. The Mo-, Nb-, and Tc-sF₄TCNQ catalysts stand out with the onset potentials of -0.18, -0.44, and -0.54 V, respectively, through the optimal reaction paths. Our work will provide guidance for the green and sustainable development of electrocatalytic nitrogen fixation.

Regulating Electronic Structure in Bi2 O3 Architectures by Ti Mediation: A Strategy for Dual Active Sites Synergistically Promoting Photocatalytic Nitrogen Hydrogenation

Under mild conditions, nitrogen undergoes the associative pathways to be reduced with solar energy as the driving force for fixation, avoiding the high energy consumption when undergoing dissociation. Nevertheless, this process is hindered by the high hydrogenation energy barrier. Herein, Ti was introduced as hard acid into the δ-Bi₂ O₃ (Ti-Bi₂ O₃ ) lattice to tune its local electronic structure and optimize its photo-electrochemistry performance (reduced bandgap, increased conduction band maximum, and extended carrier lifetime). Heterokaryotic Ti-Bi dual-active sites in Ti-Bi₂ O₃ created a novel adsorption geometry of O-N₂ interaction proved by density functional theory calculation and N₂ temperature-programmed desorption. The synergistic effect of dual-active sites reduced the energy barrier of hydrogenation from 2.65 (Bi₂ O₃ ) to 2.13 eV (Ti-Bi₂ O₃ ), thanks to the highly overlapping orbitals with N₂ . Results showed that 10 % Ti-doped Bi₂ O₃ exhibited an excellent ammonia production rate of 508.6 μmol g_cat ^-1  h^-1 in water and without sacrificial agent, which is 4.4 times higher than that of Bi₂ O₃ . In this work, bridging oxygen activation and synergistic hydrogenation for nitrogen with Ti-Bi dual active sites may unveil a corner of the hidden nitrogen reduction reaction mechanism and serves as a distinctive strategy for the design of nitrogen fixation photocatalysts.

Electronic Structure Optimization of PdZn-Graphitic Carbon Nitride Nanocomposites as Electrocatalysts for Selective CO2 to CO Conversion

Herein, a novel PdZn/g-C₃N₄ nanocomposite electrocatalyst, PdZnGCN, prepared from a facile hydrothermal reduction procedure for an efficient CO₂ to CO conversion has been examined. This composite catalyst reduces CO₂ at a thermodynamic overpotential of 0.79 V versus RHE with a 93.6% CO Faradaic efficiency and a CO partial current density of 4.4 mA cm^-2. Moreover, the turnover frequency for PdZnGCN reaches 20 974 h^-1 with an average selectivity of 95.4% for CO after 1 h and an energy efficiency approaching 59%, which is superior to most reported noble metals and metal alloys as electrocatalysts. The enhanced catalytic activity of this nanocomposite is due to synergistic interactions between PdZn and g-C₃N₄ as evidenced by optimum work function, zeta potential, CO desorption rate, and downshifted d-band center. Furthermore, suppressed grain growth during the formation of nanocomposites also results in faster reaction kinetics, as demonstrated by a lower Tafel slope (93.6 mV/dec) and a larger electrochemically active surface, consequently enhancing the overall performance.

Amorphous Boron Carbide on Titanium Dioxide Nanobelt Arrays for High-Efficiency Electrocatalytic NO Reduction to NH3

Electrocatalytic NO reduction is regarded as an attractive strategy to degrade the NO contaminant into useful NH₃ , but the lack of efficient and stable electrocatalysts to facilitate such multiple proton-coupled electron-transfer processes impedes its applications. Here, we report on developing amorphous B_2.6 C supported on a TiO₂ nanoarray on a Ti plate (a-B_2.6 C@TiO₂ /Ti) as an NH₃ -producing nanocatalyst with appreciable activity and durability toward the NO electroreduction. It shows a yield of 3678.6 μg h^-1  cm^-2 and a FE of 87.6 %, superior to TiO₂ /Ti (563.5 μg h^-1  cm^-2 , 42.6 %) and a-B_2.6 C/Ti (2499.2 μg h^-1  cm^-2 , 85.6 %). An a-B_2.6 C@TiO₂ /Ti-based Zn-NO battery achieves a power density of 1.7 mW cm^-2 with an NH₃ yield of 1125 μg h^-1  cm^-2 . An in-depth understanding of catalytic mechanisms is gained by theoretical calculations.

Defective 2D silicon phosphide monolayers for the nitrogen reduction reaction: a DFT study

Electroreduction of N₂ is a highly promising route for NH₃ production. The lack of efficient catalysts that can activate and then reduce N₂ into NH₃ limits this as a pragmatic application. In this work, a 2D layered group IV-V material, silicon phosphide (SiP), is evaluated as a suitable substrate for the electrochemical nitrogen reduction reaction (ENRR). To capture N₂, one phosphorus (P) defect was introduced on the plane of SiP. DFT calculations found that the defective SiP monolayer (D1-SiP, which is defined by the P-defect on SiP) exhibits enormous prospects towards the ENRR because of enhanced electron conductivity, good activation on N₂, lower limiting potential (U_L = -0.87 V) through the enzymatic pathway, smooth charge transfer between the catalyst and the reaction species, and robust thermal stability. Importantly, D1-SiP demonstrates the suppressed activities on producing of H₂ and N₂H₄ side-products. This research demonstrates the potential of 2D metal-free Si-based catalysts for nitrogen fixation and further enriches the study of group IV-V materials for the ENRR.

Subnanometric alkaline-earth oxide clusters for sustainable nitrate to ammonia photosynthesis

The limitation of inert N2 molecules with their high dissociation energy has ignited research interests in probing other nitrogen-containing species for ammonia synthesis. Nitrate ions, as an alternative feedstock with high solubility and proton affinity, can be facilely dissociated for sustainable ammonia production. Here we report a nitrate to ammonia photosynthesis route (NO3-RR) catalyzed by subnanometric alkaline-earth oxide clusters. The catalyst exhibits a high ammonia photosynthesis rate of 11.97 mol gmetal-1 h-1 (89.79 mmol gcat-1 h-1) with nearly 100% selectivity. A total ammonia yield of 0.78 mmol within 72 h is achieved, which exhibits a significant advantage in the area of photocatalytic NO3-RR. The investigation of the molecular-level reaction mechanism reveals that the unique active interface between the subnanometric clusters and TiO2 substrate is beneficial for the nitrate activation and dissociation, contributing to efficient and selective nitrate reduction for ammonia production with low energy input. The practical application of NO3-RR route in simulated wastewater is developed, which demonstrates great potential for its industrial application. These findings are of general knowledge for the functional development of clusters-based catalysts and could open up a path in the exploitation of advanced ammonia synthesis routes with low energy consumption and carbon emission.

A minireview on catalysts for photocatalytic N2 fixation to synthesize ammonia

Ammonia (NH3) is an important feedstock in chemical industry. Nowadays NH3 is mainly produced via the industrialized Haber-Bosch process, which requires substantial energy input, since it operates at high temperatures (400-650 °C) and high pressures (20-40 Mpa). From the energy conservation point of view, it is of great significance to explore an alternative avenue to synthesize NH3, which is in line with the concept of sustainable development. Very recently, photocatalytic N2 fixation (PNF) has been discovered as a safe and green approach to synthesize NH3, as it utilizes the inexhaustible solar energy and the abundant N2 in nature to synthesize NH3 under mild conditions. A highly efficient catalyst is the core of PNF. Up to now, extensive studies have been conducted to design efficient catalysts for PNF. Summarizing the catalysts reported for PNF and unraveling their reaction mechanisms could provide guidance for the design of better catalysts. In this review, we will illustrate the development of catalysts for PNF, including semiconductors, plasmonic metal-based catalysts, iron-based catalysts, ruthenium-based catalysts and several other catalysts, point out the remaining challenges and outline the future opportunities, with the aim to contribute to the development of PNF.

Nonylphenol photodegradation by novel ternary MIL-100(Fe)/ZnFe2O4/PCN composite under visible light irradiation via double charge transfer process

Nonylphenol (NP) residues, as a typical endocrine disrupting chemical (EDC), frequently exist in sewage, surface water, groundwater and even drinking water, which poses a serious threat to human health due to its bioaccumulation. In order to remove NP, a series of MIL-100(Fe)/ZnFe₂O₄/flake-like porous carbon nitride (MIL/ZC) was synthesized through in-situ synthesis at room temperature. High performance of ternary MIL/ZC is used to degrade NP under visible light irradiation. The results show that 30MIL/ZC2 (20 wt.% ZnFe₂O₄) ternary composite had the best photocatalytic activity (99.84%) when the dosage was 30 mg. Further mechanism analysis shows that the excellent photocatalytic activity of 30MIL/ZC2 could be ascribed to the double charge transfer process between flake-like porous carbon nitride (PCN) and other catalysts in the ternary heterojunction, and the separation of photogenerated electron-hole pairs was more effective. In addition, the 30MIL/ZC2 also showed high stability after five cycles of the photodegradation reaction. Furthermore, the active substance (•O₂^-) was considered to be the main active substance in the NP degradation process. Based on the research results, the possible photocatalytic reaction mechanism of 30MIL/ZC2 ternary composite was proposed and discussed in detail.