Heteroatom Dopants Promote Two‐Electron O 2 Reduction for Photocatalytic Production of H 2 O 2 on Polymeric Carbon Nitride

Synergistic effect of exfoliation and substitutional doping in graphitic carbon nitride for photocatalytic H2O2 production and H2 generation: a comparison and kinetic study

The fabricated exfoliated e-BCN demonstrated stupendous H2O2 production and H2 generation owing to sufficient active surface area and enhanced aromatic π-conjugation, faster charge migration/separation efficiency.

Optical control of neuronal activities with photoswitchable nanovesicles

Precise modulation of neuronal activity by neuroactive molecules is essential for understanding brain circuits and behavior. However, tools for highly controllable molecular release are lacking. Here, we developed a photoswitchable nanovesicle with azobenzene-containing phosphatidylcholine (azo-PC), coined 'azosome', for neuromodulation. Irradiation with 365 nm light triggers the trans-to-cis isomerization of azo-PC, resulting in a disordered lipid bilayer with decreased thickness and cargo release. Irradiation with 455 nm light induces reverse isomerization and switches the release off. Real-time fluorescence imaging shows controllable and repeatable cargo release within seconds (< 3 s). Importantly, we demonstrate that SKF-81297, a dopamine D1-receptor agonist, can be repeatedly released from the azosome to activate cultures of primary striatal neurons. Azosome shows promise for precise optical control over the molecular release and can be a valuable tool for molecular neuroscience studies.

P-Mediated Cu-N4 Sites in Carbon Nitride Realizing CO2 Photoreduction to C2 H4 with Selectivity Modulation

Photocatalytic CO₂ reduction to high value-added C₂ products (e.g., C₂ H₄ ) is of considerable interest but challenging. The C₂ H₄ product selectivity strongly hinges on the intermediate energy levels in the CO₂ reduction pathway. Herein, Cu-N₄ sites anchored phosphorus-modulated carbon nitride (CuACs/PCN) is designed as a photocatalyst to tailor the intermediate energy levels in the the C₂ H₄ formation reaction pathway for realizing its high production with tunable selectivity. Theoretical calculations combined with experimental data demonstrate that the formation of the C-C coupling intermediates can be realized on Cu-N₄ sites and the surrounding doped P facilitates the production of C₂ H₄ . Thus, CuACs/PCN exhibits a high C₂ H₄ selectivity of 53.2% with a yielding rate of 30.51 µmol g^-1 . The findings reveal the significant role of the coordination environment and surrounding microenvironment of Cu single atoms in C₂ H₄ formation and offer an effective approach for highly selective CO₂ photoreduction to produce C₂ H₄ .

Understanding Aerobic Nitrogen Photooxidation on Titania through In Situ Time-Resolved Spectroscopy

Nitrate is an important raw material for chemical fertilizers, but it is industrially manufactured in multiple steps at high temperature and pressure, urgently motivating the design of a green and sustainable strategy for nitrate production. We report the photosynthesis of nitrate from N₂ and O₂ on commercial TiO₂ in a flow reactor under ambient conditions. The TiO₂ photocatalyst offered a high nitrate yield of 1.85 μmol h^-1 as well as a solar-to-nitrate energy conversion efficiency up to 0.13 %. We combined reactivity and in situ Fourier transform infrared spectroscopy to elucidate the mechanism of nitrate formation and unveil the special role of O₂ in N≡N bond dissociation. The mechanistic insight into charge-involved N₂ oxidation was further demonstrated by in situ transient absorption spectroscopy and electron paramagnetic resonance. This work exhibits the mechanistic origin of N₂ photooxidation and initiates a potential method for triggering inert catalytic reactions.

Recent Advances in Self-Supported Semiconductor Heterojunction Nanoarrays as Efficient Photoanodes for Photoelectrochemical Water Splitting

Growth of semiconductor heterojunction nanoarrays directly on conductive substrates represents a promising strategy toward high-performance photoelectrodes for photoelectrochemical (PEC) water splitting. By controlling the growth conditions, heterojunction nanoarrays with different morphologies and semiconductor components can be fabricated, resulting in greatly enhanced light-absorption properties, stabilities, and PEC activities. Herein, recent progress in the development of self-supported heterostructured semiconductor nanoarrays as efficient photoanode catalysts for water oxidation is reviewed. Synthetic methods for the fabrication of heterojunction nanoarrays with specific compositions and structures are first discussed, including templating methods, wet chemical syntheses, electrochemical approaches and chemical vapor deposition (CVD) methods. Then, various heterojunction nanoarrays that have been reported in recent years based on particular core semiconductor scaffolds (e.g., TiO₂ , ZnO, WO₃ , Fe₂ O₃ , etc.) are summarized, placing strong emphasis on the synergies generated at the interface between the semiconductor components that can favorably boost PEC water oxidation. Whilst strong progress has been made in recent years to enhance the visible-light responsiveness, photon-to-O₂ conversion efficiency and stability of photoanodes based on heterojunction nanoarrays, further advancements in all these areas are needed for PEC water splitting to gain any traction alongside photovoltaic-electrochemical (PV-EC) systems as a viable and cost-effective route toward the hydrogen economy.

Construction of Atomic Metal-N2 Sites by Interlayers of Covalent Organic Frameworks for Electrochemical H2 O2 Synthesis

Electrosynthesis of H₂ O₂ is a promising alternative to the anthraquinone oxidation process because of its low energy utilization and cost-effectiveness. Heteroatom-doped carbons-based catalysts have been widely developed for H₂ O₂ synthesis. However, their doping degree, defective degree, and location of active sites are difficult to be preciously controlled at molecular level. Herein, a dioxin-linked covalent organic framework (COF) is used as the template to preciously construct different metal-N₂ sites along the porous walls for H₂ O₂ synthesis. By tuning the metal centers, the catalyst with Ca-N₂ sites enables to catalyze H₂ O₂ production with selectivity over 95% from 0.2 to 0.6 V versus RHE, while the H₂ O₂ yields for Co sites or Ni sites are 20% and 60% in the same potential range. In addition, the turnover frequency (TOF) values for Ca-N₂ sites are 11.63 e^-1 site^-1 s^-1 , which are 58 and 20 times higher than those of Co and Ni sites (0.20 and 0.57 e^-1 site^-1 s^-1 ). The theoretical calculations further reveal that the OOH* desorption on Ca sites is easier than those on Co or Ni sites, and thus catalyzes the oxygen reduction reaction in the 2e^- pathway with high efficiency.

Engineered inverse opal structured semiconductors for solar light-driven environmental catalysis

Inverse opal (IO) macroporous semiconductor materials with unique physicochemical advantages have been widely used in solar-related environmental areas. In this minireview, we first summarize the synthetic methods of IO materials, emphasizing the two-step and three-step approaches, with the typical physicochemical properties being compared where applicable. We subsequently discuss the application of IO semiconductors (e.g., TiO₂, ZnO, g-C₃N₄) in various photo-related environmental techniques, including photo- and photoelectro-catalytic organic pollutant degradation in water, optical sensors for environmental monitoring, and water disinfection. The engineering strategies of these hierarchical structures for optimizing the activities for different catalytic reactions are discussed, ranging from heterojunction construction, cocatalyst loading, and heteroatom doping, to surface defect construction. Structure-activity relationships are established correspondingly. With a systematic understanding of the unique properties and catalytic activities, this review is expected to orient the design and structure optimization of IO semiconductor materials for photo-related performance improvement in various environmental techniques. Finally, the challenges of emerging IO structured semiconductors and future development directions are proposed.

Phosphorus Tailors the d-Band Center of Copper Atomic Sites for Efficient CO2 Photoreduction under Visible-Light Irradiation

Photoreduction of CO₂ into solar fuels has received great interest, but suffers from low catalytic efficiency and poor selectivity. Herein, two single-Cu-atom catalysts with unique Cu configurations in phosphorus-doped carbon nitride (PCN), namely, Cu₁ N₃ @PCN and Cu₁ P₃ @PCN were fabricated via selective phosphidation, and tested in visible light-driven CO₂ reduction by H₂ O without sacrificial agents. Cu₁ N₃ @PCN was exclusively active for CO production with a rate of 49.8 μmol_CO  g_cat ^-1  h^-1 , outperforming most polymeric carbon nitride (C₃ N₄ ) based catalysts, while Cu₁ P₃ @PCN preferably yielded H₂ . Experimental and theoretical analysis suggested that doping P in C₃ N₄ by replacing a corner C atom upshifted the d-band center of Cu in Cu₁ N₃ @PCN close to the Fermi level, which boosted the adsorption and activation of CO₂ on Cu₁ N₃ , making Cu₁ N₃ @PCN efficiently convert CO₂ to CO. In contrast, Cu₁ P₃ @PCN with a much lower Cu 3d electron energy exhibited negligible CO₂ adsorption, thereby preferring H₂ formation via photocatalytic H₂ O splitting.

Regulating directional transfer of electrons on polymeric g-C3N5 for highly efficient photocatalytic H2O2 production

Graphite carbon nitride (g-C₃N₅) has been widely used in various photocatalytic reactions due to its higher thermodynamic stability and better electronic properties compared to g-C₃N₄. However, it is still challenging to endow g-C₃N₅ with high performance on photocatalytic hydrogen peroxide (H₂O₂) production. Herein, potassium and iodine are co-doped into g-C₃N₅ (g-C₃N₅-K, I) for photocatalytic production of H₂O₂ with high efficiency. As expected, the photocatalytic H₂O₂ production rate over the g-C₃N₅-K, I (2933.4 μM h^-1) reaches to 84.22 times as that of g-C₃N₅. The excellent photocatalytic H₂O₂ production activity is mainly ascribed to the co-doping of K and I, which significantly improves the capacity of oxygen (O₂) adsorption, selectivity of two-electrons oxygen reduction reaction (2e^- ORR) and separation efficiency of charge carriers. The density functional theory (DFT) calculations reveal that O₂ molecules are more conducive to being adsorbed on g-C₃N₅-K, I. Besides, the result of excited states further indicates that photo-generated electrons can be directionally driven to the adsorbed O₂ molecules, which are effectively activated to form H₂O₂. The findings will contribute to new insights in designing and synthesizing g-C₃N₅ based photocatalysts for the H₂O₂ production.

Polarization Engineering of Covalent Triazine Frameworks for Highly Efficient Photosynthesis of Hydrogen Peroxide from Molecular Oxygen and Water

Two-electron oxygen photoreduction to hydrogen peroxide (H₂ O₂ ) is seriously inhibited by its sluggish charge kinetics. Herein, a polarization engineering strategy is demonstrated by grafting (thio)urea functional groups onto covalent triazine frameworks (CTFs), giving rise to significantly promoted charge separation/transport and obviously enhanced proton transfer. The thiourea-functionalized CTF (Bpt-CTF) presents a substantial improvement in the photocatalytic H₂ O₂ production rate to 3268.1 µmol h^-1 g^-1 with no sacrificial agents or cocatalysts that is over an order of magnitude higher than unfunctionalized CTF (Dc-CTF), and a remarkable quantum efficiency of 8.6% at 400 nm. Mechanistic studies reveal the photocatalytic performance is attributed to the prominently enhanced two-electron oxygen reduction reaction by forming endoperoxide at the triazine unit and highly concentrated holes at the thiourea site. The generated O₂ from water oxidation is subsequently consumed by the oxygen reduction reaction (ORR), thereby boosting overall reaction kinetics. The findings suggest a powerful functional-groups-mediated polarization engineering method for the development of highly efficient metal-free polymer-based photocatalysts.

Molecularly Engineered Covalent Organic Frameworks for Hydrogen Peroxide Photosynthesis

Synthesizing H₂ O₂ from water and air via a photocatalytic approach is ideal for efficient production of this chemical at small-scale. However, the poor activity and selectivity of the 2 e^- water oxidation reaction (WOR) greatly restricts the efficiency of photocatalytic H₂ O₂ production. Herein we prepare a bipyridine-based covalent organic framework photocatalyst (denoted as COF-TfpBpy) for H₂ O₂ production from water and air. The solar-to-chemical conversion (SCC) efficiency at 298 K and 333 K is 0.57 % and 1.08 %, respectively, which are higher than the current reported highest value. The resulting H₂ O₂ solution is capable of degrading pollutants. A mechanistic study revealed that the excellent photocatalytic activity of COF-TfpBpy is due to the protonation of bipyridine monomer, which promotes the rate-determining reaction (2 e^- WOR) and then enhances Yeager-type oxygen adsorption to accelerate 2 e^- one-step oxygen reduction. This work demonstrates, for the first time, the COF-catalyzed photosynthesis of H₂ O₂ from water and air; and paves the way for wastewater treatment using photocatalytic H₂ O₂ solution.

A Methyl-Modified Silica Layer Supported on Porous Ceramic Membranes for the Enhanced Separation of Methyl Tert-Butyl Ether from Aqueous Solution

As a kind of volatile organic compound (VOC), methyl tert-butyl ether (MTBE) is hazardous to human health and destructive to the environment if not handled properly. MTBE should be removed before the release of wastewater. The present work supported the methyl-modified silica layer (MSL) on porous α-Al₂O₃ ceramic membranes with methyltrimethoxysilane (MTMS) as a precursor and pre-synthesized mesoporous silica microspheres as dopants by the sol-gel reaction and dip-coating method. MTMS is an environmentally friendly agent compared to fluorinated alkylsilane. The MSL-supported Al₂O₃ ceramic membranes were used for MTBE/water separation by pervaporation. The NMR spectra revealed that MTMS evolves gradually from an oligomer to a highly cross-linked methyl-modified silica species. Methyl-modified silica species and pre-synthesized mesoporous silica microspheres combine into hydrophobic mesoporous MSL. MSL makes the α-Al₂O₃ ceramic membranes transfer from amphiphilic to hydrophobic and oleophilic. The MSL-supported α-Al₂O₃ ceramic membranes (MSL-10) exhibit an MTBE/water separation factor of 27.1 and a total flux of 0.448 kg m⁻² h⁻¹, which are considerably higher than those of previously reported membranes that are modified by other alkylsilanes via the post-grafting method. The mesopores within the MSL provide a pathway for the transport of MTBE molecules across the membranes. The presence of methyl groups on the external and inner surface is responsible for the favorable separation performance and the outstanding long-term stability of the MSL-supported porous α-Al₂O₃ ceramic membranes.

Dual Active Centers Bridged by Oxygen Vacancies of Ru Single Atoms Hybrids Supported on Molybdenum Oxide for Photocatalytic Ammonia Synthesis

Photocatalytic synthesis of ammonia (NH 3 ) holds significant potential compared with the Haber-Bosch process. However, the reported photocatalysts suffered from low efficiency owing to localized electrons deficiency. Here, Ru-SA (single atoms)/H x MoO 3-y hybrids with abundant of Mo n+ (n < 6) species neighboring oxygen vacancies (O V ) are synthesized via a H-spillover process. Detailed characterizations demonstrate that Ru-SA/H x MoO 3 y hybrids can quantitatively produce NH 3 from N 2 and H 2 by the synergetic effect of dual active centers (Ru SA and Mo n+ ). That is, Ru SA boost the activation and migration of H 2 , and Mo n+ species act as the trapping sites of localized electrons and the adsorption and dissociation sites of N 2 , finally leading to NH 3 synthesis on Mo n+ -OH. The NH 3 generation rate is as high as 4.0 mmol h -1 g -1 , accompanied by an apparent quantum efficiency over 6.0% at 650 nm. Our finding may open up a new strategy for acquiring a better NH 3 synthesis approach under mild conditions.

Linear Conjugated Polymers for Solar-Driven Hydrogen Peroxide Production: The Importance of Catalyst Stability

Hydrogen peroxide (H2O2) is one of the most important industrial oxidants. In principle, photocatalytic H2O2 synthesis from oxygen and H2O using sunlight could provide a cleaner alternative route to the current anthraquinone process. Recently, conjugated organic materials have been studied as photocatalysts for solar fuels synthesis because they offer synthetic tunability over a large chemical space. Here, we used high-throughput experiments to discover a linear conjugated polymer, poly(3-4-ethynylphenyl)ethynyl)pyridine (DE7), which exhibits efficient photocatalytic H2O2 production from H2O and O2 under visible light illumination for periods of up to 10 h or so. The apparent quantum yield was 8.7% at 420 nm. Mechanistic investigations showed that the H2O2 was produced via the photoinduced stepwise reduction of O2. At longer photolysis times, however, this catalyst decomposed, suggesting a need to focus the photostability of organic photocatalysts, as well as the initial catalytic production rates.

Internal-electric-field induced high efficient type-I heterojunction in photocatalysis-self-Fenton reaction: Enhanced H2O2 yield, utilization efficiency and degradation performance

Herein, a type-I phosphorus-doped carbon nitride/oxygen-doped carbon nitride (P-C₃N₄/O-C₃N₄) heterojunction was designed for photocatalysis-self-Fenton reaction (photocatalytic H₂O₂ production and following Fenton reaction). In P-C₃N₄/O-C₃N₄, the photoinduced charge carriers were effectively separated with the help of internal-electric-field near the interface, ensuring the high catalytic performance. As a result, the production rate of H₂O₂ in an air-saturated solution was 179 μM·h^-1, about 7.2, 2.5, 2.5 and 2.1 times quicker than that on C₃N₄, P-C₃N₄, O-C₃N₄, and phosphorus and oxygen co-doped C₃N₄, respectively. By taking advantage of the cascade mode in photocatalysis-self-Fenton reaction, H₂O₂ utilization efficiency was remarkably improved to 77.7%, about 9.0 times higher than that of traditional homogeneous Fenton reaction. Befitting from the superior yield and utilization efficiency, the degradation performance of P-C₃N₄/O-C₃N₄ was undoubtedly superior than other photocatalysts. This work well addressed two bottlenecks in traditional Fenton reaction: source of H₂O₂ and their low utilization efficiency, and the findings were beneficial to understand the mechanism and advantage of the photocatalysis-self-Fenton system in environmental remediation.

Molecular-functionalized engineering of porous carbon nitride nanosheets for wide-spectrum responsive solar fuel generation

Carbon nitride (C₃N₄) is a promising metal-free photocatalyst for solar-to-energy conversion, but bulk carbon nitride (BCN) shows insufficient light absorption, sluggish photocarrier transfer and moderate activity for photocatalysis. Herein, a facile strategy to significantly increase solar spectrum absorption of the functionalized porous carbon nitride nanosheets (MFPCN) via molecule self-assembly engineering coupled thermal polymerization is reported. This strategy can greatly enhance the wide-solar-spectrum absorption of MFPCN up to 1000 nm than most reported carbon nitride-based photocatalysts. Experimental characterizations and theoretical calculations together display that this strategy could introduce hydroxyl groups into the structure of MFPCN as well as the rich pores and active sites at the edges of framework, which can narrow the bandgap and accelerate the transfer and separation of photoinduced carries. As a result, the optimal MFPCN photocatalyst exhibit the excellent photocatalytic hydrogen evolution rate of 7.745 mmol g^-1h^-1 under simulated solar irradiation, which is ≈13 times that of BCN with remarkable durable CO₂ reduction activities. New findings in this work will provide an approach to extend solar spectrum absorption of metal-free catalysts for solar fuel cascades.

Cu-Ion-Implanted and Polymeric Carbon Nitride-Decorated TiO2 Nanotube Array for Unassisted Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting over TiO₂ photoanodes is a promising strategy for hydrogen production due to its eco-friendly, energy-saving, and low-cost nature. However, the intrinsic drawbacks of TiO₂, i.e., the too wide band gap and rapid exciton recombination, significantly limit further enhancement of its performance. Herein, we report a TiO₂ nanotube array (TNA), which is implanted by Cu ions and decorated by polymeric carbon nitride (PCN) nanosheets, as a photoanode for the high-efficiency PEC water splitting. In such designed material, Cu-ion implantation can effectively tailor the electronic structure of TiO₂, thus narrowing the band gap and enhancing the electronic conductivity. Meanwhile, the PCN decoration induces TiO₂/PCN heterojunctions, enhancing the visible light absorption and accelerating the exciton separation. Upon this synergistic effect, the modified TNA photoanode shows significantly improved PEC capability. Its photocurrent density, solar-to-hydrogen efficiency, and applied bias photon-to-current efficiency achieve 1.89 mA cm^-2 at 1.23 V_RHE (V vs reversible hydrogen electrode), 2.31%, and 1.20% at 0.46 V_RHE, respectively. Importantly, this modified TNA supported on a meshlike Ti substrate can be readily integrated with a perovskite solar cell to realize unassisted PEC water splitting.

Iodide-Induced Fragmentation of Polymerized Hydrophilic Carbon Nitride for High-Performance Quasi-Homogeneous Photocatalytic H2 O2 Production

Polymeric carbon nitride (PCN) as a class of two-electron oxygen reduction reaction (2 e^- ORR) photocatalyst has attracted much attention for H₂ O₂ production. However, the low activity and inferior selectivity of 2 e^- ORR greatly restrict the H₂ O₂ production efficiency. Herein, we develop a new strategy to synthesize hydrophilic, fragmented PCN photocatalyst by the terminating polymerization (TP-PCN) effect of iodide ions. The obtained TP-PCN with abundant edge active sites (AEASs), which can form quasi-homogeneous photocatalytic system, exhibits superior H₂ O₂ generation rate (3265.4 μM h^-1 ), far surpassing PCN and other PCN-based photocatalysts. DFT calculations further indicate that TP-PCN is more favorable for electron transiting from β spin-orbital to the π* orbitals of O₂ , which optimizes O₂ activation and reduces the energy barrier of H₂ O₂ formation. This work provides a new concept for designing functional photocatalysts and understanding the mechanism of O₂ activation in ORR for H₂ O₂ production.

Quantification of photocatalytically-generated hydrogen peroxide in the presence of organic electron donors: Interference and reliability considerations

Photocatalytic H₂O₂ production is an innovative on-site H₂O₂ synthesis method to treat organic pollutants through Fenton-like reactions, avoiding the need and potential liability of H₂O₂ storage and transportation. Accurate quantification of H₂O₂ is crucial to explore the mechanism of photocatalytic H₂O₂ production and optimize reaction parameters. In this work, three common H₂O₂ quantification methods (i.e., titration with potassium permanganate (KMnO₄), and colorimetry with ammonium metavanadate (NH₄VO₃) or N,N-diethylp-phenylenediamine-horseradish peroxidase (DPD-POD)) were compared and their susceptibility to interference by seven types of representative organics were considered. Interference mechanisms were explored based on the electron-donating (E_gap) and electron-accepting (E_LUMO) ability of the present organics. The accuracy of the KMnO₄ titration method is greatly compromised by aromatic compounds even at 0.1 mM due to the increased KMnO₄ consumption by direct oxidation. The presence of p-benzoquinone that directly reacts with NH₄VO₃ and DPD compromises these colorimetric methods, especially DPD-POD colorimetry at concentrations as low as 0.1 mM. The DPD-POD method should also be scrutinized in the presence of phenols due to significant disturbance by oxidation byproducts (e.g. hydroquinone inducing immediate color disappearance). A flowchart was generated to provide guidelines for selecting an appropriate H₂O₂ quantification method for different water matrices treated by Fenton-like reactions.