Advancing the Logic of Chemical Synthesis: C-H Activation as Strategic and Tactical Disconnections for C-C Bond Construction

A Cheap and Efficient Oxidant (n-Bu)4NNO3-Enabled C(sp2)- and C(sp3)-H Olefination at Room Temperature

To further promote the widely practical application of C-H activation, developing green and mild reaction conditions has invariably been the objective of researchers, especially when it comes to remote C-H activation reactions. Herein, we report a new cheap and powerful (n-Bu)₄NNO₃ oxidant. This oxidant is efficient and universal for Pd(II)-catalyzed sp² and sp³ C-H olefination and allows the reaction to be carried out at room temperature. Because of this, we attempted to make C-H functionalization more economical and environmentally benign.

Directing Group Repositioning Strategy Enabled Site- and Enantioselective Addition of Heteroaromatic C-H Bonds to Acyclic Internal Alkenes

Despite the notable advances achieved in the Murai-type hydroarylations, highly enantioselective catalytic addition of native (hetero)arenes to internal alkenes remains a prominent challenge. Herein, we report a directing group repositioning strategy, which enables the iridium-catalyzed enantioselective addition of heteroarenes including furan, benzofuran, and thiophene to internal enamides. The C-H bond at the C2 position of the heteroarene is site-selectively cleaved and added regioselectively to the β-position of an enamide, affording a valuable β-heteroaryl amide with high enantioselectivity. Mechanistic studies indicate that the rate and the enantioselectivity are determined by separate elementary steps.

Propargyl Alcohols as Bifunctional Reagents for Divergent Annulations of Biphenylamines via Dual C-H Functionalization/Dual Oxidative Cyclization

The C-H functionalization strategy provides access to valuable molecules that previously required convoluted synthetic attempts. Dual C-H unsymmetrical functionalization, with a single bifunctional reagent, is an effective tactic. Propargyl alcohols (PAs), despite containing a reactive C≡C bond, have not been explored as building blocks via oxidative cleavage. Annulations via C-H activation are a versatile and synthetically attractive strategy. We disclose PA as a new bifunctional reagent for unsymmetrical dual C-H functionalization of biphenylamine for regioselectively annulated outcomes. On tuning the conditions, the annulation bifurcated towards an unusual dual oxidative cyclization. This method accommodates a wide range of PAs and showcases late-stage diversification of some natural products.

Carbonylative Formal Cycloaddition between Alkylarenes and Aldimines Enabled by Palladium-Catalyzed Double C-H Bond Activation

Double C-H bond activation can enable an expeditious reaction pathway to cyclic compounds, offering an efficient tool to synthesize valuable molecules. However, cyclization reaction enabled by double C-H bond activation at one carbon atom is nearly unknown. Herein, we report a carbonylative formal cycloaddition of alkylarenes with imines via double benzylic C-H bond activation at one carbon atom, allowing a straightforward synthesis of β-lactams from readily accessible alkylarenes and imines, which paves the way for developing an annulation reaction through double C-H bond activation at one carbon atom.

Directed C8-H allylation of quinoline N-oxides with vinylcyclopropanes via sequential C-H/C-C activation

The Rh(III)-catalyzed C8-allylation of quinoline N-oxides has been accomplished using vinylcyclopropanes as an allyl source with excellent diastereoselectivity at room temperature. The C-H/C-C activation, substrate scope and natural product mutation are the important practical features.

Ligand-Enabled Palladium(II)-Catalyzed Enantioselective β-C(sp3 )-H Arylation of Aliphatic Tertiary Amides

Amide is one of the most widespread functional groups in organic and bioorganic chemistry, and it would be valuable to achieve stereoselective C(sp³ )-H functionalization in amide molecules. Palladium(II) catalysis has been prevalently used in the C-H activation chemistry in the past decades, however, due to the weakly-coordinating feature of simple amides, it is challenging to achieve their direct C(sp³ )-H functionalization with enantiocontrol by Pd^II catalysis. Our group has developed sulfoxide-2-hydroxypridine (SOHP) ligands, which exhibited remarkable activity in Pd-catalyzed C(sp² )-H activation. In this work, we demonstrate that chiral SOHP ligands served as an ideal solution to enantioselective C(sp³ )-H activation in simple amides. Herein, we report an efficient asymmetric Pd^II /SOHP-catalyzed β-C(sp³ )-H arylation of aliphatic tertiary amides, in which the SOHP ligand plays a key role in the stereoselective C-H deprotonation-metalation step.

Ru3 (CO)12 -Catalyzed Modular Assembly of Hemilabile Ligands by C-H Activation of Phosphines with Isocyanates

Hemilabile ligands have been applied extensively in transition metal catalysis, but preparations of these molecules typically require multistep synthesis. Here, modular assembly of diverse phosphine-amide ligands, including related axially chiral compounds, is first reported through ruthenium-catalyzed C-H activation of phosphines with isocyanate directed by phosphorus(III) atoms. High reactivity and regioselectivity can be obtained by using a Ru₃ (CO)₁₂ catalyst with a mono-N-protected amino acid ligand. This transformation significantly expands the pool of phosphine-amide ligands, some of which have shown excellent efficiency for asymmetric catalysis. More broadly, the discovery constitutes a proof of principle for facile construction of hemilabile ligands directly from the parent monodentate phosphines by C-H activation with ideal atom, step and redox economy. Several dinuclear ruthenium complexes were characterized by single-crystal X-ray diffraction analysis revealing the key mechanistic features of this transformation.

Ultrasound-promoted synthesis of a copper-iron-based catalyst for the microwave-assisted acyloxylation of 1,4-dioxane and cyclohexene

A copper-iron-based catalyst has been prepared by a low-temperature co-precipitation and sonication method. The use of high-energy ultrasound reduces the time required for the preparation process from one workweek to one day with respect to the catalysts obtained by conventional coprecipitation and thermal treatment methods. The resulting material has been characterized at compositional, textural, structural, and chemical levels by ICP-AES, BET, SEM-EDS, XRD, TEM, and FTIR among other techniques. The material shows catalytic activity in the acyloxylation reaction of 1,4-dioxane and cyclohexene under microwave irradiation. In parallel with the optimized catalyst synthesis, the use of microwaves allowed for a substantial improvement in the outcome of the reaction in terms of cleanliness, yield, and time.

Iridium-Catalyzed ortho-Selective Borylation of Aromatic Amides Enabled by 5-Trifluoromethylated Bipyridine Ligands

Iridium-catalyzed borylations of aromatic C-H bonds are highly attractive transformations because of the diversification possibilities offered by the resulting boronates. These transformations are best carried out using bidentate bipyridine or phenanthroline ligands, and tend to be governed by steric factors, therefore resulting in the competitive functionalization of meta and/or para positions. We have now discovered that a subtle change in the bipyridine ligand, namely, the introduction of a CF₃ substituent at position 5, enables a complete change of regioselectivity in the borylation of aromatic amides, allowing the synthesis of a wide variety of ortho-borylated derivatives. Importantly, thorough computational studies suggest that the exquisite regio- and chemoselectivity stems from unusual outer-sphere interactions between the amide group of the substrate and the CF₃ -substituted aryl ring of the bipyridine ligand.

Progress in copper-catalysed/mediated intramolecular dehydrogenative coupling

Transition metal-catalysed C-H functionalization reactions are one of the most efficient synthetic methodologies to construct carbon-carbon and carbon-heteroatom bonds. The initial developments in the field were largely dominated by expensive transition metal catalysts. However, in the past decade, the focus of the catalyst shifted to first-row transition metals and copper catalysis contributed significantly. Abundant, cost-effective, and less toxic copper catalysts are an ideal green alternative to palladium and similar metals. The intramolecular dehydrogenative coupling itself developed as a prominent area of focus as the strategy straightaway affords complex polycyclic scaffolds in one pot. Regioselective activation of inert C-H bonds were made possible with copper catalysts and interestingly, oxygen served as the terminal oxidant in most of the cases. In the present review the focus is on the intramolecular dehydrogenative coupling reactions between carbon-hydrogen and heteroatom-hydrogen bonds to afford carbon-carbon and carbon-hetero atom bonds, catalysed/mediated by copper salts. Though the intermolecular dehydrogenative coupling reactions of copper have already been reviewed more than once, to the best of our knowledge this is the first comprehensive account of copper-based intramolecular dehydrogenative coupling.

Transition-metal-catalyzed C-H bond activation as a sustainable strategy for the synthesis of fluorinated molecules: an overview

The last decade has witnessed the emergence of innovative synthetic tools for the synthesis of fluorinated molecules. Among these approaches, the transition-metal-catalyzed functionalization of various scaffolds with a panel of fluorinated groups (XR_F, X = S, Se, O) offered straightforward access to high value-added compounds. This review will highlight the main advances made in the field with the transition-metal-catalyzed functionalization of C(sp²) and C(sp³) centers with SCF₃, SeCF₃, or OCH₂CF₃ groups among others, by C-H bond activation. The scope and limitations of these transformations are discussed in this review.

Palladium-Catalyzed Cascade Cyclization for the Synthesis of Fused Benzo-Aza-Oxa-[5-6-5] Tetracycles

A novel and expedient cascade strategy has been demonstrated for the synthesis of fused benzo-aza-oxa-[5-6-5] tetracycles in high yields and diastereoselectivities (up to 20 : 1 dr). The strategy was fulfilled through palladium-catalyzed oxidative convergent assembly of functionally divergent anilines and 3-butenoic acid with five chemical bonds constructed. Coupled with control experiments and deuterium labelled studies, DFT calculations were performed for the proposed mechanism. The utility of the illustrated strategy is emphasized by gram-scale syntheses, late-stage functionalization, and the transformation to a key core of natural products such as martinellic acid and seneciobipyrrolidine.

Silver-Free C-H Activation: Strategic Approaches towards Realizing the Full Potential of C-H Activation in Sustainable Organic Synthesis

The activation of carbon-hydrogen bonds is considered as one of the most attractive techniques in synthetic organic chemistry because it bears the potential to shorten synthetic routes as well as to produce complementary product scopes compared to traditional synthetic strategies. However, many current methods employ silver salts as additives, leading to stoichiometric metal waste and thereby preventing the full potential of C-H activation to be exploited. Therefore, the development of silver-free protocols has recently received increasing attention. Mechanistically, silver can serve various roles in C-H activation and thus, avoiding the use of silver requires different approaches based on the role it serves in a given process. In this Review, we present the comparison of silver-based and silver-free methods. Focusing on the strategic approaches to develop silver-free C-H activation, we provide the reader with the means to develop sustainable methods for C-H activation.

Palladium-Catalyzed PIDA-Mediated δ-C(sp3 )-H Acetoxylation of Amino Acid Derivatives: Overriding Competitive Intramolecular Amination

The selective δ-C(sp³ )-H acetoxylation of N-(SO₂ Py)-protected amino acid derivatives has been accomplished by using palladium-catalysis and PhI(OAc)₂ (PIDA) as both terminal oxidant and acetoxy source. The distinct structural and electronic features of the SO₂ Py compared to more traditional carbonyl-based directing groups is essential to override the otherwise more favourable competitive intramolecular C-H amination. The δ-site selectivity predominates over traditionally more favorable 5-membered cyclopalladation at competitive γ-CH₂ . Experimental and DFT mechanistic studies provide important insights about the mechanism and the underlying factors controlling the chemo- and regioselectivity.

Ligand-Enabled Pd(II)-Catalyzed β-Methylene C(sp3)-H Arylation of Free Aliphatic Acids

Ligand development has enabled rapid advances in Pd(II)-catalyzed β-methyl C(sp3)-H activation of free carboxylic acids. However, there are only a handful of reports of free-acid-directed β-methylene C(sp3)-H activation, all of which are limited to intramolecular reactions. Herein, we report the first Pd(II)-catalyzed intermolecular β-methylene C(sp3)-H arylation of free aliphatic acids, which is enabled by bidentate pyridine-pyridone ligands. The bite angle of this ligand has been discovered to play a key role in promoting β-methylene C-H activation of free carboxylic acid. This new transformation provides a disconnection for alkylation of arenes with simple aliphatic acids. A variety of free aliphatic acids, including the antiasthmatic drug seratrodast, were compatible with the reported protocol.

Directed Palladium Catalyzed C-H (Ethoxycarbonyl)difluoromethylthiolation Reactions

The unprecedented Pd-catalyzed (ethoxycarbonyl)difluoromethylthiolation reaction of various unsaturated derivatives was studied. In the presence of the (ethoxycarbonyl)difluoromethylsulfenamide reagent I and under mild reaction conditions (60 °C), both 2-(hetero)aryl and 2-(α-aryl-vinyl)pyridine derivatives were smoothly functionalized with this methodology (37 examples, up to 87 % yield). Moreover, the synthetic interest of this fluorinated moiety was further showcased by its conversion into various original fluorinated residues. Finally, a plausible mechanism for this transformation was suggested.

Ru(II)-Catalyzed Hydroarylation of in situ Generated 3,3,3-Trifluoro-1-propyne by C-H Bond Activation: A Facile and Practical Access to β-Trifluoromethylstyrenes

In this study, a practical and straightforward synthesis of β-(E)-trifluoromethylstyrenes by ruthenium-catalyzed C-H bond activation was developed. The readily available and inexpensive 2-bromo-3,3,3-trifluoropropene (BTP), a non-ozone depleting reagent, was used as a reservoir of 3,3,3-trifluoropropyne. With this approach, the monofunctionalization of a panel of heteroarenes was possible in a safe and scalable manner (23 examples, up to 87 % yield). Mechanistic investigations and density functional theory (DFT) calculations were also conducted to get a better understanding of the mechanism of this transformation. These studies suggested that 1) a cyclometallated ruthenium complex enabled the transformation, 2) this complex exhibited high efficiency in this transformation compared to the commercially available [RuCl2 (p-cymene)]2 and 3) the mechanism proceeded through a bis-cyclometallated ruthenium intermediate for the carboruthenation step.

Exploiting photoredox catalysis for carbohydrate modification through C–H and C–C bond activation

Photoredox catalysis has recently emerged as a powerful synthetic platform for accessing complex chemical structures through non-traditional bond disconnection strategies that proceed through free-radical intermediates. Such synthetic strategies have been used for a range of organic transformations; however, in carbohydrate chemistry they have primarily been applied to the generation of oxocarbenium ion intermediates in the ubiquitous glycosylation reaction. In this Review, we present more intricate light-induced synthetic strategies to modify native carbohydrates through homolytic C-H and C-C bond cleavage. These strategies allow access to glycans and glycoconjugates with profoundly altered carbohydrate skeletons, which are challenging to obtain through conventional synthetic means. Carbohydrate derivatives with such structural motifs represent a broad class of natural products integral to numerous biochemical processes and can be found in active pharmaceutical substances. Here we present progress made in C-H and C-C bond activation of carbohydrates through photoredox catalysis, focusing on the operational mechanisms and the scope of the described methodologies.

Ligand-Enabled Sequential C(sp3)-H and C(sp2)-H Diolefination Reaction via Palladium Catalyst

Palladium-catalyzed sequential C(sp³)-H and C(sp²)-H bond diolefination reaction of o-toluidine has been realized for the first time using acetyl-protected aminoethyl phenyl thioether ligands. This novel reaction allows for preparation of the conjugated diene structure via an immediate second olefination on the basis of the first C(sp³)-H olefination in one pot. Various triflyl-protected anilines and acrylates were used as coupling partners elegantly. Furthermore, the unpurified diolefination products can be easily converted to tetrahydroquinoline derivatives.

Access to π-Extended Heterocycles Containing Pyrrolo-Coumarin Cores Involving -COCH3 as a Traceless Directing Group and Materializing Two Successive sp2C-H/sp3N-H and sp2C-H/sp2N-H Activations

An efficient protocol has been developed for the preparation of π-extended N-heterocycles involving a Rh(III)-catalyzed C-H activation reaction starting from 3-acetamidocoumarins and internal alkynes. The isolation of the intermediate pyrrolo-coumarin suggests that the -COCH₃ group in acetamidocoumarins performs the role of a traceless directing group. Besides, the use of commercially available [Cp*RhCl₂]₂ adds more importance as no additional modification of the catalyst is required. A two-step protocol bearing intermediate pyrrolo-coumarin can be further functionalized to highly decorated heterocyclic moieties materializing sp² C-H and sp² N-H coupling. Moreover, one of the pyrrolo-coumarin compounds (3da) is capable of differentiating between Cr(III) and Cr(VI) ions as revealed via fluorescence spectroscopy. In addition, intermediate pyrrolo-coumarin is further functionalized to spirocyclic N-heterocycles.

Bioinspired Palladium-Catalyzed Intramolecular C(sp3 )-H Activation for the Collective Synthesis of Proline Natural Products

Bioinspired palladium-catalyzed intramolecular cyclization of amino acid derivatives containing a vinyl iodide moiety by C-H activation enabled rapid access to a wide range of functionalized proline derivatives with an exocyclic olefin. To demonstrate the practicality of this methodology, the functionalized prolines were used as intermediates for the synthesis of several natural products: lucentamycin A, oxotomaymycin, oxoprothracarcin, and barmumycin.

Palladium-catalyzed C-H trifluoromethylselenolation of arenes with [Me4N][SeCF3] and an oxidant

Trifluoromethylselenolation of arenes with [Me₄N][SeCF₃] in the presence of an oxidant through Pd-catalyzed C(sp²)-H activation under the assistance of a directing group is established for the first time. The reaction tolerates different directing groups and a variety of functional groups, enabling selective installation of a SeCF₃ moiety onto the ortho positions of arenes. Mechanistic studies revealed that the CF₃SeSeCF₃ intermediate in situ generated from oxidation of [Me₄N][SeCF₃] might be the real SeCF₃ reagent in the reaction.

Synthesis and Mechanistic Investigation of Bipyrazolo[1,5-a]pyridines via Palladium-Catalyzed Cross-Dehydrogenative Coupling of Pyrazolo[1,5-a]pyridines

The synthesis of a range of 3,3'-bipyrazolo[1,5-a]pyridine derivatives via direct cross-dehydrogenative coupling of pyrazolo[1,5-a]pyridine precursors is herein presented. This simple and efficient methodology involving palladium(II)-catalyzed C-H bond activation showed good functional group tolerance and product yield (up to 94%). Through the mechanistic insights gained from both kinetic isotope effect experimental studies and density functional theory calculations, a plausible reaction mechanism was outlined. Furthermore, subsequent derivatizations of the resulting 7,7'-diaryl-3,3'-bipyrazolo[1,5-a]pyridines, executed by performing palladium-mediated ortho C-H bond activation followed by hypervalent iodine-induced chlorination, rendered this series of compounds more extended π-conjugation and twisted conformations. Our study on these bipyrazolo[1,5-a]pyridine-based luminogens provides new opportunities for tailor-made organic luminescent materials.

Amine-Catalyzed Copper-Mediated C-H Sulfonylation of Benzaldehydes via a Transient Imine Directing Group

Transient directing groups (TDGs) can provide a powerful means for C-H functionalization without requiring additional steps for directing group introduction and removal. We report the first use of a TDG in combination with copper to effect C-H functionalization. The regioselective copper mediated β-C(sp2 )-H sulfonylation of aldehydes with sulfinate salts is accomplished using catalytic β-alanine to form a transient imine. A broad range of sulfonylated benzaldehydes are prepared using copper fluoride as both copper source and oxidant, involving a [5,6] cupracyclic intermediate. γ-(peri)-Sulfonylation of napthyl and phenanthrenyl carboxaldehydes is achieved through [6,6] cupracyclic intermediates. Further derivatisation of the aldehyde products is demonstrated. Kinetic experiments and Hammett analysis suggest the turnover limiting step to be a concerted asynchronous C-H cleavage via a dearomative Wheland-type transition state.

Synthetic applications of hydride abstraction reactions by organic oxidants

Carbon-hydrogen bond functionalizations provide an attractive method for streamlining organic synthesis, and many strategies have been developed for conducting these transformations. Hydride-abstracting reactions have emerged as extremely effective methods for oxidative bond-forming processes due to their mild reaction conditions and high chemoselectivity. This review will predominantly focus on the mechanism, reaction development, natural product synthesis applications, approaches to catalysis, and use in enantioselective processes for hydride abstractions by quinone, oxoammonium ion, and carbocation oxidants. These are the most commonly employed hydride-abstracting agents, but recent efforts illustrate the potential for weaker ketone and triaryl borane oxidants, which will be covered at the end of the review.

Access to hexahydroazepinone heterocycles via palladium-catalysed C(sp3)-H alkenylation/ring-opening of cyclopropanes

In this communication, we describe the synthesis of novel hexahydroazepinone derivatives starting from two simple building blocks in presence of a readily available palladium catalyst. The reaction proceeds through a selective C(sp³)-H alkenylation/ring-opening process to obtain the seven-membered ring products in good to excellent yields on a wide variety of substrates under batch, microwave, and continuous flow conditions.

A Class of Readily Tunable Planar-Chiral Cyclopentadienyl Rhodium(III) Catalysts for Asymmetric C-H Activation

Chiral half-sandwich cyclopentadienyl rhodium(III) (CpRh^III ) complexes are powerful catalysts for promoting asymmetric C-H activation reactions. Their preparation normally involved linking or embedding the Cp motif to or into a certain chiral backbone to forge the so-called chiral Cp ligand. However, preparation of a planar-chiral CpRh^III catalyst bearing a non-chiral Cp ligand remains a formidable challenge and is rarely reported. We describe herein an unusual class of planar-chiral rhodium catalysts bearing non-chiral Cp ligands. Different from existing ones, this catalyst is readily tunable. Ten planar-chiral only CpRh^III catalysts were prepared with ease, and successfully used in two enantioselective C-H activation reactions. Given its convenient synthesis and high structural tunability, these catalysts are expected to find more utilities in asymmetric C-H activation.

para-Selective C-H Borylation of Aromatic Quaternary Ammonium and Phosphonium Salts

Aromatic ammonium and phosphonium salts are important synthetic intermediates and multifunctional materials, but para-selective functionalization of the aromatic salts remains a challenge. Here we develop an ionic ligand based on our newly designed "biphenyl-phenanthroline" skeleton and realize the Ir-catalyzed para-selective C-H borylation of seven types of aromatic quaternary ammonium and phosphonium salts. Gram-scale transformation, late-stage elaboration for drug molecule, and diversification of borylated products demonstrate the potential utility of this reaction. The mechanistic studies and computational analysis elucidate the origin of para-selectivity.

Different Chiral Ligands Assisted Enantioselective C-H Functionalization with Transition-Metal Catalysts

C–H bonds are common in organic molecules, and the functionalization of these inactive C–H bonds has become one of the most powerful methods used to assemble complicated bioactive molecules from readily available starting materials. However, a central challenge in these reactions is controlling their stereoselectivity. Recently, significant progress has been made in the development of enantioselective C–H activation enabled by different chiral ligands for the formation of C–C and C–X bonds bearing a chiral center. In this paper, we focus on some archetypal chiral ligands for enantioselective C–H functionalization developed in recent years and analyze the mechanism of these methods, aiming to accelerate related research and to search for more efficient strategies.