Proteome analysis: biological assay or data archive?

An accurate mass tag strategy for quantitative and high-throughput proteome measurements

We describe and demonstrate a global strategy that extends the sensitivity, dynamic range, comprehensiveness, and throughput of proteomic measurements based upon the use of peptide "accurate mass tags" (AMTs) produced by global protein enzymatic digestion. The two-stage strategy exploits Fourier transform-ion cyclotron resonance (FT-ICR) mass spectrometry to validate peptide AMTs for a specific organism, tissue or cell type from "potential mass tags" identified using conventional tandem mass spectrometry (MS/MS) methods, providing greater confidence in identifications as well as the basis for subsequent measurements without the need for MS/MS, and thus with greater sensitivity and increased throughput. A single high resolution capillary liquid chromatography separation combined with high sensitivity, high resolution and accurate FT-ICR measurements has been shown capable of characterizing peptide mixtures of significantly more than 10(5) components with mass accuracies of < 1 ppm, sufficient for broad protein identification using AMTs. Other attractions of the approach include the broad and relatively unbiased proteome coverage, the capability for exploiting stable isotope labeling methods to realize high precision for relative protein abundance measurements, and the projected potential for study of mammalian proteomes when combined with additional sample fractionation. Using this strategy, in our first application we have been able to identify AMTs for >60% of the potentially expressed proteins in the organism Deinococcus radiodurans.

An automated on-line multidimensional HPLC system for protein and peptide mapping with integrated sample preparation

A comprehensive on-line two-dimensional 2D-HPLC system with integrated sample preparation was developed for the analysis of proteins and peptides with a molecular weight below 20 kDa. The system setup provided fast separations and high resolving power and is considered to be a complementary technique to 2D gel electrophoresis in proteomics. The on-line system reproducibly resolved approximately 1000 peaks within the total analysis time of 96 min and avoided sample losses by off-line sample handling. The low-molecular-weight target analytes were separated from the matrix using novel silica-based restricted access materials (RAM) with ion exchange functionalities. The size-selective sample fractionation step was followed by anion or cation exchange chromatography as the first dimension. The separation mechanism in the subsequent second dimension employed hydrophobic interactions using short reversed-phase (RP) columns. A new column-switching technique, including four parallel reversed-phase columns, was employed in the second dimension for on-line fractionation and separation. Gradient elution and UV detection of two columns were performed simultaneously while loading the third and regenerating the fourth column. The total integrated workstation was operated in an unattended mode. Selected peaks were collected and analyzed off-line by MALDI-TOF mass spectrometry. The system was applied to protein mapping of biological samples of human hemofiltrate as well as of cell lysates originating from a human fetal fibroblast cell line, demonstrating it to be a viable alternative to 2D gel electrophoresis for mapping peptides and small proteins.

Selective incorporation of isotopically labeled amino acids for identification of intact proteins on a proteome-wide level

The post-genomic era and increased demands for broad proteome measurements have greatly increased the needs for protein identification. We describe a strategy that uses accurate mass measurements and partial amino acid content information to unambiguously identify intact proteins, and show its initial application to the proteomes of Escherichia coli and Saccharomyces cerevisiae. Proteins were extracted from the organisms grown in minimal medium or minimal medium to which isotopically labeled leucine (Leu-D(10)) had been added. The two protein extracts were mixed and analyzed by capillary isoelectric focusing (CIEF) coupled with Fourier transform ion cyclotron resonance mass spectrometry (FTICR). The incorporation of the isotopically labeled residue has no effect on the CIEF separation of proteins, and both isotopically labeled and unlabeled versions of specific proteins are observed within the same mass spectrum. The difference in the mass of the unlabeled and labeled proteins is used to determine the number of Leu residues present in a particular protein. Proteins can then often be unambiguously identified based on their accurately determined molecular mass and the additional constraint provided by number of Leu residues. The identities of proteins were further confirmed by repeating CIEF/FTICR measurements with samples that contain other isotopically labeled amino acid residues (e.g. His, Arg, Ile, Phe, Lys). A theoretical study of the amino acid composition (for a difference in the amino acid sequence) showed the constraints needed in order to identify the protein unambiguously. Additionally, the mass differences between the predicted and the experimental accurate mass measurement provide insights into the nature of simple post-translational modifications.

Possibilities to improve automation, speed and precision of proteome analysis: a comparison of two-dimensional electrophoresis and alternatives

Proteome analysis requires fast methods with high separation efficiencies in order to screen the various cell and tissue types for their proteome expression and monitor the effect of environmental conditions and time on this expression. The established two-dimensional gel electrophoresis (2-DE) is by far too slow for a consequential screening. Moreover, it is not precise enough to observe changes in protein concentrations. There are various approaches that promise faster, automated proteome analysis. This article concentrates on capillary (CT isoelectric focusing coupled to mass spectrometry (CIEF-MSn) and preparative IEF followed by size-exclusion chromatography, hyphenated with MS (PIEF-SEC-MS). These two approaches provide a similar separation pattern as the established 2-DE technique and therefore allow for the continued use of data based on this traditional approach. Their performances have been discussed and compared to 2-DE, evaluating 169 recent articles. Data on analysis time, automation, the detection limit, quantitation, peak capacity, mass and pI accuracy, as well as on the required sample amount are compared in a table.

Proteome, transcriptome and genome: top down or bottom up analysis?

Biological systems are comprised of protein components found at a wide variety of abundances from millions of molecules of a single species per cell to less than one copy per cell. Because of this wide range of concentrations, measurement or a full accounting of each system is presently unavailable. Conventional separation and analytical methods (two-dimensional gel electrophoresis and mass spectrometry) allow identification and quantitation of many of the most abundant gene products (top down methods); and the majority of gene products, which are found at low abundance, can be neither identified nor measured in complex mixtures at present. The gene products that are found at low levels can be characterized and their properties analyzed by preparing ordered gene libraries of limited complexity from mRNA. When such preparations are expressed in cell free systems and analyzed by two-dimensional gel electrophoresis, the features of the gene products are available for analysis. This 'bottom up' approach allows identification of gene product properties so that analytical procedures can be devised and applied to complex mixtures.

Identification of post-translationally modified proteins in proteome studies

Proteome studies are powerful tools to solve many different problems in metabolism, signal transduction, drug discovery, and other areas of interest in life sciences. Up to now, high-sensitive methods for protein identification after two-dimensional gel electrophoresis using mass spectrometry are available. However, the identification of post-translational modifications after two-dimensional gel electrophoresis is still an unsolved problem. In this paper, we want to give several examples for the successful identification of post-translational modifications and point mutations.

Quantitative proteome analysis: methods and applications

With the completion of a rapidly increasing number of complete genomic sequences, much attention is currently focused on how the information contained in sequence databases might be interpreted in terms of the structure, function, and control of biological systems. Quantitative proteome analysis, the global analysis of protein expression, has been proposed as a method to study steady-state gene expression and perturbation-induced changes. Here, we discuss the rationale for quantitative proteome analysis, highlight the limitations in the current standard technology, and introduce a new experimental approach to quantitative proteome analysis.

Characterization of differently processed forms of enolase 2 from Saccharomyces cerevisiae by two-dimensional gel electrophoresis and mass spectrometry

Two-dimensional gel electrophoresis, bioinformatics, and mass spectrometry are key analysis tools in proteome analysis. The further characterization of post-translational modifications in gel-separated proteins relies fully on data obtained by mass spectrometric analysis. In this study, stress-induced changes in protein expression in Saccharomyces serevisiae were investigated. A total of eleven spots on a silver-stained two-dimensional (2-D) gel were identified by matrix-assisted laser desorption/ionization (MALDI) peptide mass mapping to represent C and/or N-terminal processed forms of enolase 2. The processing sites were determined by MALDI peptide mass mapping using a variety of proteolytic enzymes, by optimizing the sample preparation procedure and by specific labeling of all C-termini derived from in-gel digestion using a buffer containing 16O:18O (1:1). Out of eleven processed forms of enolase 2, six were fully characterized and the approximate processing sites identified for the remaining five.

Proteomics on a chip: promising developments

The field of proteomics is expanding rapidly due to the completion of the human genome and the realization that genomic information is often insufficient to comprehend cellular mechanisms. This considerable expansion of proteomics towards high-throughput platforms is stressing its current technical capabilities. In recent years, technologies in microfluidic and array technologies have appeared for proteomics. These novel approaches might help solve current technical challenges in proteomics. This review presents a general survey of the recent development in microfluidic and array technologies from a proteomics perspective.

Differences between predicted and observed sequences in Saccharomyces cerevisiae

We recently studied the protein composition of a Saccharomyces cerevisiae wine yeast strain (K310) of enological interest. About 2,500 spots of 8-250 kDa observed molecular mass were resolved by two-dimensional gel electrophoresis. Experimental molecular masses and isoelectric points were calculated for most of them. Twenty-seven proteins were subjected to Edman microsequencing. N-terminal sequences of 12/27 proteins were determined, whereas internal sequences of 6/27 proteins were obtained following in situ proteolysis. Comparison between the experimental data and those reported in the SWISS-PROT database revealed some differences between genotypic and phenotypic sequences. These are indicative of the changes a protein can undergo with respect to the primary structure coded by the genomic DNA. Our results highlight the need to complement genomic analysis with detailed proteomics in order to refine the vast amount of information provided by DNA sequencing and to find an exact correlation between genome and proteome.

The establishment of a human liver nuclei two-dimensional electrophoresis reference map

This short communication describes the establishment of a two-dimensional electrophoresis (2-DE) reference map of nuclear proteins isolated from human liver. The human liver nuclei 2-DE reference map contains 1497 spots. In an initial identification study using peptide mass fingerprinting as a means of protein identification we were able to identify 26 spots corresponding to 15 different proteins. The human liver nuclei 2-DE reference map is now included in the SWISS-2DPAGE database, which can be accessed through the ExPASy server (http://www.expasy.ch/ch2d/).

Search and Discovery Strategies for Biotechnology: the Paradigm Shift

SUMMARY

Profound changes are occurring in the strategies that biotechnology-based industries are deploying in the search for exploitable biology and to discover new products and develop new or improved processes. The advances that have been made in the past decade in areas such as combinatorial chemistry, combinatorial biosynthesis, metabolic pathway engineering, gene shuffling, and directed evolution of proteins have caused some companies to consider withdrawing from natural product screening. In this review we examine the paradigm shift from traditional biology to bioinformatics that is revolutionizing exploitable biology. We conclude that the reinvigorated means of detecting novel organisms, novel chemical structures, and novel biocatalytic activities will ensure that natural products will continue to be a primary resource for biotechnology. The paradigm shift has been driven by a convergence of complementary technologies, exemplified by DNA sequencing and amplification, genome sequencing and annotation, proteome analysis, and phenotypic inventorying, resulting in the establishment of huge databases that can be mined in order to generate useful knowledge such as the identity and characterization of organisms and the identity of biotechnology targets. Concurrently there have been major advances in understanding the extent of microbial diversity, how uncultured organisms might be grown, and how expression of the metabolic potential of microorganisms can be maximized. The integration of information from complementary databases presents a significant challenge. Such integration should facilitate answers to complex questions involving sequence, biochemical, physiological, taxonomic, and ecological information of the sort posed in exploitable biology. The paradigm shift which we discuss is not absolute in the sense that it will replace established microbiology; rather, it reinforces our view that innovative microbiology is essential for releasing the potential of microbial diversity for biotechnology penetration throughout industry. Various of these issues are considered with reference to deep-sea microbiology and biotechnology.

Search and discovery strategies for biotechnology: the paradigm shift

Profound changes are occurring in the strategies that biotechnology-based industries are deploying in the search for exploitable biology and to discover new products and develop new or improved processes. The advances that have been made in the past decade in areas such as combinatorial chemistry, combinatorial biosynthesis, metabolic pathway engineering, gene shuffling, and directed evolution of proteins have caused some companies to consider withdrawing from natural product screening. In this review we examine the paradigm shift from traditional biology to bioinformatics that is revolutionizing exploitable biology. We conclude that the reinvigorated means of detecting novel organisms, novel chemical structures, and novel biocatalytic activities will ensure that natural products will continue to be a primary resource for biotechnology. The paradigm shift has been driven by a convergence of complementary technologies, exemplified by DNA sequencing and amplification, genome sequencing and annotation, proteome analysis, and phenotypic inventorying, resulting in the establishment of huge databases that can be mined in order to generate useful knowledge such as the identity and characterization of organisms and the identity of biotechnology targets. Concurrently there have been major advances in understanding the extent of microbial diversity, how uncultured organisms might be grown, and how expression of the metabolic potential of microorganisms can be maximized. The integration of information from complementary databases presents a significant challenge. Such integration should facilitate answers to complex questions involving sequence, biochemical, physiological, taxonomic, and ecological information of the sort posed in exploitable biology. The paradigm shift which we discuss is not absolute in the sense that it will replace established microbiology; rather, it reinforces our view that innovative microbiology is essential for releasing the potential of microbial diversity for biotechnology penetration throughout industry. Various of these issues are considered with reference to deep-sea microbiology and biotechnology.

A two dimensional electrophoresis database of a human Jurkat T-cell line

About 2000 protein spots of human Jurkat T-cells were detected by high resolution two-dimensional gel electrophoresis (2-DE) and were characterized in terms of their isoelectric point and molecular mass. A 2-DE database was constructed and is available at http://www.mpiib-berlin.mpg.de/2D-PAGE/. At present the database contains 67 identified protein spots. These proteins were identified after tryptic digestion by peptide mass fingerprinting with delayed extraction-matrix assisted laser desorption/ionization-mass spectrometry (DE-MALDI-MS). Proteins with a sequence coverage of at least 30% were introduced in the database. This sequence coverage could not always be obtained by using only the matrix alpha-cyano-4-hydroxycinnamic acid (CHCA) for the mass analysis. Therefore, an additional mass spectrum was recorded by using 2,5-dihydroxybenzoic acid (DHB). Usually, additional mass peaks were detected and together with the mass spectrum of CHCA this resulted in the desired sequence coverage.

Compression wood-responsive proteins in developing xylem of maritime pine (Pinus pinaster ait.)

When a conifer shoot is displaced from its vertical position, compression wood (CW) is formed on the under side and can eventually return the shoot to its original position. Changes in cell wall structure and chemistry associated with CW are likely to result from differential gene/protein expression. Two-dimensional polyacrylamide gel electrophoresis of differentiating xylem proteins was combined with the physical characterization of wooden samples to identify and characterize CW-responsive proteins. Differentiating xylem was harvested from a 22-year-old crooked maritime pine (Pinus pinaster Ait.) tree. Protein extracted from different samples were revealed by high-resolution silver stained two-dimensional polyacrylamide gel electrophoresis and analyzed with a computer-assisted system for single spot quantification. Growth strain (GS) measurements allowed xylem samples to be classified quantitatively from normal wood to CW. Regression of lignin and cellulose content on GS showed that an increase in the percentage of lignin and a decrease of the percentage of cellulose corresponded to increasing GS values, i.e. CW. Of the 137 studied spots, 19% were significantly associated with GS effect. Up-regulated proteins included 1-aminocyclopropane-1-carboxylate oxidase (an ethylene forming enzyme), a putative transcription factor, two lignification genes (caffeic O-methyltransferase and caffeoyl CoA-O-methyltransferase), members of the S-adenosyl-L-methionine-synthase gene family, and enzymes involved in nitrogen and carbon assimilation (glutamine synthetase and fructokinase). A clustered correlation analysis was performed to study simultaneously protein expression along a gradient of gravistimulated stressed xylem tissue. Proteins were found to form "expression clusters" that could identify: (a) Gene product under similar control mechanisms, (b) partner proteins, or (c) functional groups corresponding to specialized pathways. The possibility of obtaining regulatory correlations and anticorrelations between proteins provide us with a new category of homology (regulatory homology) in tracing functional relationships.

Protein analysis by mass spectrometry and sequence database searching: a proteomic approach to identify human lymphoblastoid cell line proteins

Lymphoblastoid cell lines correspond to in vitro EBV-immortalized lymphocyte B-cells. These cells display a suitable model for experiments dealing with changes in protein expression occurring upon B-cell differentiation, after drug treatment, or after inhibition of some transcription factors. For all these reasons we have undertaken an effort aimed at developing a hematopoietic cell line protein two-dimensional electrophoresis (2-DE) database, containing B-lymphoblastoid 2-DE maps. In this work, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) peptide mass fingerprinting analysis was adopted for protein identification. The peptide mass fingerprinting identification and the sequence coverage obtained on colloidal Coomassie blue (CBB) stained gel was close to that obtained using zinc-imidazole staining. Everything considered, CBB being more comfortable for subsequent spot manipulations, CBB staining was chosen for identification of a larger number of polypeptides. The results suggest that reticulation of the gel can interfere preventing the uptake of the enzyme during the in-gel digestion step. Consequently, low molecular mass proteins appear more difficult to identify by mass fingerprinting. Finally, the information provided in this study allows the construction of a new annoted reference map of human lymphoblastoid cell proteins. Among the identified proteins 60% were not yet positioned on 2-DE maps in three of the most important well-documented databases. The annoted map will be accessible via Internet on the LBPP server at URL:http:// www-smbh.univ-paris13.fr/lbtp/index.htm.

Proteomics: applications and opportunities in preclinical drug development

Advances in DNA sequencing and the near-term availability of whole genome sequences for several pharmaceutically relevant organisms promise to dramatically alter the breadth and scale of high-throughput proteomic studies. The substantial amount of literature is available in the public domain, demonstrate the potential of proteomics in the preclinical phases of pharmaceutical development. Over the next few years, it is anticipated that functional genomics and proteomics will have major impacts on the clinical phases of drug development. Expected benefits are earlier proof-of-concept studies in man and increased efficiency of clinical trials through the availability of biologically relevant markers for drug efficacy and safety.

Proteomic analysis

The field of proteomics is becoming increasingly important as genome sequences are being completed and annotated. Recent advances in proteomics include experimental and mathematical proofs of the need to complement microarray analysis with protein analysis, improved sensitivity for mass spectrometric analysis of separated proteins, better informatic tools for gel analysis and protein spot annotation, first steps towards automated experimental procedures, and new technology for quantitation of protein changes.

From primary structure to function: biological insights from large-molecule mass spectra

As increasing information is available from genomic databases, mass spectrometry has begun to be used to identify and/or assess regions of predicted DNA or protein sequence. Mass spectrometry performance limits, together with experiments designed for genomic interplay, are being extended to allow accurate genotyping and protein profiling of cells at rates commensurate with the data-intensive future of biology.

Studying heart disease using the proteomic approach

The pathogenic mechanisms underlying cardiac dysfunction in heart disease are still largely unknown. It is likely, though, that significant alterations in myocardial gene and protein expression underlie these disease processes and determine their progression and outcome. Most molecular studies of cardiac dysfunction have been carried out on specific cellular systems. However, the application of the proteomic approach to the study of heart disease has made it possible to characterize global alterations in protein expression. This promises new insights into the cellular mechanisms involved in cardiac dysfunction and is likely to result in the discovery of novel diagnostic markers and new therapeutic opportunities.

Electrophoretic mobility-assisted identification of proteins by nanoelectrospray capillary electrophoresis/mass spectrometry under methanolic conditions

A novel method for electrophoretic mobility-assisted identifications of proteins, using capillary electrophoresis/mass spectrometry (CE/MS) under methanolic conditions, was developed. The number of functional groups of the enzymatic digest peptides was estimated from a single run CE/MS analysis and utilized as an additional tag for database searching in addition to the mass map of the peptides. The additional amino acid information thus obtained can improve the confidence level of the protein identification. The database searching software algorithm ProFound was modified to accept the tag, based on this new concept. In this study, optimization of the CE/MS conditions for the estimation of basic functional groups was performed as an example. An accurate value of the number of such functional groups was obtained from CE characteristics when methanolic buffer (methanol/formic acid/water = 60:20:20) was used, via an excellent correlation (r = 0.997) between the number of functional groups of the peptides and [MW((2/3))]. The mass spectrometry sensitivity was also improved when using the methanolic buffer in comparison with that obtained using aqueous 1% formic acid buffer. The identification of a protein of Saccharomyces cerevisiae, which was separated by two-dimensional electrophoresis, was performed using the methanolic buffer in combination with sheathless nanoelectrospray CE/MS. A protein spot that had not been identified by MALDI-TOFMS and LC/MS/MS was successfully identified using this new method.

The microbial proteome database--an automated laboratory catalogue for monitoring protein expression in bacteria

Laboratories devoted to high-throughput characterisation of purified proteins arrayed via two-dimensional (2-D) gel electrophoresis face an arduous task in maintaining a centralised and constantly evolving record of information relating to the characterisation of proteins and their responses following biological challenges. The Microbial Proteome Database (MPD) has been conceived as an in-house resource for complementing the plethora of genomic databases available for such organisms. The database utilises commercially available software to provide an electronic 'lab book' of information obtained daily from 2-D electrophoresis gels, image analysis packages, protein characterisation methodologies, and biological experimentation. The MPD begins from a single 2-D gel image (a 2-D 'reference map') with clickable spots that link to a 'protein catalogue' (ProtCat) with spot information including protein identity, changes in expression determined under experimental conditions, cellular location, mass, and pI. The entry for each protein then contains further links to gel images corresponding to the presence of the particular protein within different subproteomes (as defined by the pH of narrow- and wide-range immobilised pH gradients or from differential extraction methods used to determine the location of the protein within a functional cell). The database currently contains information from strains of three microbial species (Escherichia coil, Pseudomonas aeruginosa and Staphylococcus aureus) and 32 master gel images. The rapid accessibility of information obtained from microbial proteomes is an essential step towards the integrated analysis of these organisms at the gene, transcript, protein and functional levels and will aid in reducing turnaround times between sample preparation and the discovery of molecules of biological significance.

An integrated proteomic approach to studying glomerular nephrotoxicity

A single dose of puromycin aminonucleoside (PAN) given parenterally to rats induces ultrastructural glomerular changes and a nephrotic syndrome similar in many respects to human minimal change nephropathy. The exact aetiologies of both the human and the experimental syndromes are unknown, and are probably multifactorial. However, among the observed consequences in humans and rats is increased plasma protein excretion in urine, beginning in the latter typically 3-6 days after PAN administration. In view of this, two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) has been used to profile urinary proteins during PAN-induced nephrotoxicity and subsequent recovery in the rat. In addition, urinary high performance liquid chromatography (HPLC) profiles and high resolution proton nuclear magnetic resonance (NMR) spectroscopy has been utilised to simultaneously detect toxin-induced changes in the relative concentrations of a number of metabolites. The proteomic approach, in conjunction with these other techniques, has the potential to provide significantly more mechanistic information than is provided readily by traditional clinical chemistry.

Candida albicans pathogenicity: a proteomic perspective

Candida albicans is an opportunistic fungus which causes both superficial infections and life-threatening systemic candidiasis in immunocompromised hosts such as AIDS patients, people with cancer, or other immunosuppressed individuals. Virulence factors for this fungus include the ability to adhere to host tissues, production of tissue damaging secreted enzymes, and changes in morphological form that may enhance tissue penetration and avoidance of immune surveillance. Treatment of candidiasis patients is hampered by a limited choice of antifungal agents and the appearance of clinical isolates resistant to azole drugs. Proteome analysis involves the separation and isolation of proteins by two-dimensional gel electrophoresis and their identification and characterization by mass spectrometry. The systematic application of this methodology to C. albicans is in its infancy, but is progressing rapidly. Comparing protein profiles between avirulent and virulent C. albicans strains, between drug-sensitive and -resistant strains, or between different morphological forms, could identify key control and effector proteins. There are difficulties, however, associated with the display of low abundance and cell envelope-associated proteins and the choice of conditions for obtaining suitable C. albicans cells. This article describes the potential of applying proteome analysis to C. albicans in order to better understand pathogenicity and identify new antifungal targets.

Accurate quantitation of protein expression and site-specific phosphorylation

A mass spectrometry-based method is described for simultaneous identification and quantitation of individual proteins and for determining changes in the levels of modifications at specific sites on individual proteins. Accurate quantitation is achieved through the use of whole-cell stable isotope labeling. This approach was applied to the detection of abundance differences of proteins present in wild-type versus mutant cell populations and to the identification of in vivo phosphorylation sites in the PAK-related yeast Ste20 protein kinase that depend specifically on the G1 cyclin Cln2. The present method is general and affords a quantitative description of cellular differences at the level of protein expression and modification, thus providing information that is critical to the understanding of complex biological phenomena.

SDS capillary gel electrophoresis of proteins in microfabricated channels

Analysis of variations in the concentrations or structures of biomolecules (e.g., mRNAs, proteins, peptides, natural products) that occur either naturally or in response to environmental or genetic perturbations can provide important insight into complex biological processes. Many biological samples are mixtures that require a separation step before quantitation of variations in the individual components. Two-dimensional denaturing gel electrophoresis has been used very effectively to separate complex mixtures of proteins, but it is time consuming and requires considerable amounts of sample. Microchannel-based separations have proven very effective in rapidly separating small amounts of nucleic acids; more recently, isoelectric focusing of proteins also has been adapted to the microchannel format. Here, we describe microchannel-based SDS capillary gel electrophoresis of proteins and demonstrate the speed and high resolution it provides. This development is an important step toward the miniaturization and integration of multidimensional and array separation methods for complex protein mixtures.

Proteomics and automation

Proteome analysis is concerned with the global changes in protein expression as visualized most commonly by two-dimensional gel electrophoresis and analyzed by mass spectrometry. A drastic increase in the rapidity and reproducibility of protein isolation and identification is needed for proteome analysis to become a useful complement to global mRNA analysis. Simplification and standardization, based on innovation in both hard- and software, are prerequisites to the creation of automated proteomics platforms that are both robust and user-friendly, and will allow many more laboratories access to this technique. In this review we highlight the weak points in the chain of analysis (such as sample handling, protein separation and digestion) and summarize recent trends toward automation in instrumentation and software and offer our own personal view of future developments in the field.

Proteome analysis of the model microsymbiont Sinorhizobium meliloti: isolation and characterisation of novel proteins

Sinorhizobium meliloti is an agriculturally and ecologically important microbe due to its capacity to establish nitrogen-fixing symbiosis with plant legumes. Two-dimensional gel electrophoresis of total cellular protein was used to establish a proteome reference map for the model microsymbiont Sinorhizobium meliloti strain 1021. The extent of changes in the gene expression of cells grown in a defined medium at different growth phases was established. After examination of over 2000 resolved protein spots, a minimum of 52 reproducible changes in protein expression levels were detected when early exponential phase cells were compared to late exponential phase cells. In contrast, induction of nodulation gene expression by the addition of the flavonoid luteolin to cells did not result in detectable changes in protein expression at either early or late exponential phase. N-terminal microsequencing of eighteen unknown constitutive proteins plus four proteins, induced or up-regulated in late exponential phase cells, allowed the identification of proteins not previously described in rhizobia. These included an amide-binding protein, a putative hydrolase of the glyoxalase II protein family, a nucleoside diphosphate kinase, and a 5'-nucleotidase. N-terminal microsequencing was also valuable in revealing N-terminal post-translational processing and assigning a subcellular location to the analysed protein. Proteome analysis will provide a powerful analytical tool to complement the sequencing of the genome of strain 1021.

Replication-induced protein synthesis and its importance to proteomics

Replication-induced protein synthesis (RIPS) can occur following the passage of the replisome due to transcription initiated by RNA polymerase in association with: (i) negative supercoiling trailing the replisome / replication fork, (ii) hemimethylation prior to the action of dam methylase, (iii) transient derepression following passage of the replisome/replication fork and prior to renewed synthesis of the repressor gene-product, and (iv) 'sliding clamp' accessory DNA-binding proteins binding to the lagging strand DNA duplex to retard rotational upstream propagation of supercoils. The latter include subunits of DNA polymerase III in Escherichia coli and gp45 in T4 bacteriophage. By far the most convincing evidence for the existence of RIPS comes from the pulse of protein synthesis which follows the passage of the replisome in late T4 bacteriophage, the dynamics of replication in Escherichia coli, recent results from cDNA high-density expression arrays in yeast and the workings of the lac-operon. More circumstantial evidence is provided by 'leaky' or 'aberrant' protein expression in genetic systems where attempts have been made to turn off protein synthesis by molecular means. In higher vertebrates, RIPS may have a potentially important role in explaining the mechanisms by which thymic and peripheral immune self-tolerance is established, either directly through antigen presentation on dendritic cells or through the presentation of peptides derived from T-cells. The latter model is preferred, as young T-cells will have recently divided and will be dying in large numbers near the antigen-presenting dendritic cells in the thymus. The functional utility of RIPS would appear to be linked to both facilitating cellular metabolism and an improved survival during stress. RIPS, as a potentially universal molecular phenomenon, presents proteomics with numerous challenges and opportunities, both technical and commercial.

Proteome in perspective

This review describes briefly proteome science. It explains why proteome science or proteomics emerged only recently and why a shift from genomics to proteomics is occurring. This review further illustrates that proteomics can unravel new domains in nature's complexity. Finally, it demonstrates that proteomics is offering new tools for the study of complex biological or medical problems.