The Impact of Malt Derived Proteins on Beer Foam Quality. Part I. The Effect of Germination and Kilning on the Level of Protein Z4, Protein Z7 and LTP1

Mutation analysis of barley malt protein Z4 and protein Z7 on beer foam stability

Beer foam stability is an important characteristic. It has been suggested that isoforms of protein Z, that is, protein Z4 and protein Z7, contribute to beer foam stability. We investigated the relationship between beer foam stability and protein Z4 and protein Z7 using their deficient mutants. As a protein Z4-deficient mutant, cv. Pirkka was used. Protein Z7 deficiency was screened in 1564 barley accessions in the world collection of Okayama University, Japan. The barley samples from normal, protein Z4-deficient, protein Z7-deficient, and double-deficient were genotyped in F(2) populations and then pooled based on the DNA marker genotypes of protein Z4 and protein Z7. For a brewing trial, F(5) pooled subpopulations were used. After malting and brewing, the foam stability was determined, and the results showed that the levels of foam stability in the four samples were comparable. Two-dimensional gel electrophoresis was used to investigate the proteome in these beer samples. The results showed that low molecular weight proteins, including lipid transfer protein (LTP2), in the deficient mutants were higher than those in the normal sample. Our results suggest that the contribution of protein Z4 and protein Z7 to beer foam stability was not greater than that of other beer proteins.

Identification of a protein with antioxidant activity that is important for the protection against beer ageing

This study was carried out with fresh Australian lager beer which was sampled directly off the production line, the same samples aged for 12 weeks at 30 °C, and the vintage beer which was kept at 20 °C for 5 years. Characteristic Australian lager flavour was maintained in the fresh and vintage beers but was lost in the aged beer. Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and free thiol group labelling analyses of beer proteins found that this flavour stability correlated with the presence of an unknown 10 kilodaltons (kDa) protein with a higher level of free thiols. The protein was purified by size-exclusion chromatography, then peptide sequencing and database matching identified it as the barley lipid transfer protein (LTP1). Further characterisation using diphenylpicrylhydrazyl (DPPH) free radical scavenging and a Saccharomyces cerevisiae-based antioxidant screening assay demonstrated that the LTP1 protein was active in DPPH reduction and antioxidant activity. The absence of free thiol in the aged beer indicates that the thiol functional groups within the LTP1 protein were saturated and suggests that it is important in the flavour stability of beer by maintaining reduction capacity during the ageing process.

Impact of low hydration of barley grain on β-glucan degradation and lipid transfer protein (LTP1) modifications during the malting process

One of the objectives of the malting industry is to reduce the energy cost during kilning without major effect on malt quality. In this study, the impact of a low hydration steeping process on lipid transfer protein (LTP1) modifications and β-glucan breakdown was evaluated in low (LH) and high (HH) hydrated malts. LTP1 modifications analyzed by MS/MS revealed acylation, glycation, and disulfide bond breakage in both LH and HH malts. LTP1 free amine content measurement and fluorescence of Maillard protein adducts revealed no significant difference between LH and HH malts. Immunolabeling of LTP1 during malting highlighted the diffusion of the protein from the aleurone layer to the endosperm at the end of steeping in both LH and HH malts. By contrast, a significant higher amount of β-glucans was measured in LH malts after five days of germination, whereas no significant difference between LH and HH malts was revealed through immunostaining of β-glucans or evaluation of the endosperm integrity after seven days of germination. The possibility to reduce the effects of a low hydration steeping process on β-glucan hydrolysis by increasing germination time was discussed.

Development of DNA markers associated with beer foam stability for barley breeding

Traits conferring brewing quality are important objectives in malting barley breeding. Beer foam stability is one of the more difficult traits to evaluate due to the requirement for a relatively large amount of grain to be malted and then the experimental costs for subsequent brewing trials. Consequently, foam stability tends to be evaluated with only advanced lines in the final stages of the breeding process. To simplify the evaluation and selection for this trait, efficient DNA makers were developed in this study. Previous studies have suggested that the level of both of the foam-associated proteins Z4 and Z7 were possible factors that influenced beer foam stability. To confirm the relationship between levels of these proteins in beer and foam stability, 24 beer samples prepared from malt made from 10 barley cultivars, were examined. Regression analyses suggested that beer proteins Z4 and Z7 could be positive and negative markers for beer foam stability, respectively. To develop DNA markers associated with contents of proteins Z4 and Z7 in barley grain, nucleotide sequence polymorphisms in barley cultivars in the upstream region of the translation initiation codon, where the promoter region might be located were compared. As a result, 5 and 23 nucleotide sequence polymorphisms were detected in protein Z4 and protein Z7, respectively. By using these polymorphisms, cleaved amplified polymorphic sequence (CAPS) markers were developed. The CAPS markers for proteins Z4 and Z7 were applied to classify the barley grain content of 23 barley cultivars into two protein Z4 (pZ4-H and pZ4-L) and three protein Z7 (the pZ7-H, pZ7-L and pZ7-L2) haplotypes, respectively. Barley cultivars with pZ4-H showed significantly higher levels of protein Z4 in grain, and those with pZ7-L and pZ7-L2 showed significantly lower levels of protein Z7 in grain. Beer foam stability in the cultivars with pZ4-H and pZ7-L was significantly higher than that with pZ4-L and pZ7-H, respectively. Our results indicate that these CAPS markers provide an efficient selection tool for beer foam stability in barley breeding programs.

From proteomics to structural studies of cytosolic/mitochondrial-type thioredoxin systems in barley seeds

Thioredoxins (Trx) are ubiquitous proteins that participate in thiol disulfide reactions via two active site cysteine residues, allowing Trx to reduce disulfide bonds in target proteins. Recent progress in proteome analysis has resulted in identification of a wide range of potential target proteins for Trx, indicating that Trx plays a key role in several aspects of cell metabolism. In contrast to other organisms, plants contain multiple forms of Trx that are classified based on their primary structures and sub-cellular localization. The reduction of cytosolic and mitochondrial types of Trx is dependent on NADPH and catalyzed by NADPH-dependent thioredoxin reductase (NTR). In barley, two isoforms each of Trx and NTR have been identified and investigated using proteomics, gene expression, and structural studies. This review outlines the diverse roles suggested for cytosolic/mitochondrial-type Trx systems in cereal seeds and summarizes the current knowledge of the barley system including recent data on function, regulation, interactions, and structure. Directions for future research are discussed.

Novel prediction method of beer foam stability using protein Z, barley dimeric alpha-amylase inhibitor-1 (BDAI-1) and yeast thioredoxin

Foam stability is an important quality trait of beer. Our previous results of two-dimensional gel electrophoresis (2DE) analyses of beer proteins implied a relationship between barley dimeric alpha-amylase inhibitor-1 (BDAI-1) and beer foam stability as judged by the NIBEM-T analyzer. To develop a novel prediction method of beer foam stability under different conditions of barley cultivar and malt modification, multiple linear regression analysis was applied. The spot intensities of major beer proteins on 2DE gel were quantified and used as explanatory variables. The foam stabilities of 25 beer samples each brewed from malt with different malt modification in one of the three cultivars (cultivars A, B, and C) were explained by the spot intensities of BDAI-1 at the 5% significance level ( r = 0.421). Furthermore, two other major protein spots (b0 and b5) were observed on the 2DE gels of Japanese commercial beer samples with different foam stability. Then, multiple regression for foam stability was calculated using these three spot intensities as explanatory variables. As a result, 72.1% of the beer foam stability in 25 beer samples was explained by a novel multiple regression equation calculated using spot b0 and BDAI-1 as positive explanatory variables and spot b5 as a negative variable. To verify the validity of the multiple regression equation and the explanatory variables, the beer foam stability in practical beer samples was analyzed. As a result, 81.5% of the beer foam stability in 10 Japanese commercial beer samples was also explained by using spot b0 and BDAI-1 as positive explanatory variables and spot b5 as a negative variable. Mass spectrometry analyses followed by database searches revealed that protein spots b0 and b5 were identified as protein Z originated from barley and thioredoxin originated from yeast, respectively. These results confirm that BDAI-1 and protein Z are foam-positive factors and identify yeast thioredoxin as a possible novel foam-negative factor.

The influence of barley malt protein modification on beer foam stability and their relationship to the barley dimeric alpha-amylase inhibitor-I (BDAI-I) as a possible foam-promoting protein

The foam stability of beer is one of the important key factors in evaluating the quality of beer. The purpose of this study was to investigate the relationship between the level of malt modification (degradation of protein, starch, and so on) and the beer foam stability. This was achieved by examining foam-promoting proteins using two-dimensional gel electrophoresis (2DE). We found that the foam stability of beer samples brewed from the barley malts of cultivars B and C decreased as the level of malt modification increased; however, the foam stability of cultivar A did not change. To identify the property providing the increased foam stability of cultivar A, we analyzed beer proteins using 2DE. We analyzed three fractions that could contain beer foam-promoting proteins, namely, beer whole proteins, salt-precipitated proteins, and the proteins concentrated from beer foam. As a result, we found that in cultivar A, some protein spots did not change in any of these three protein fractions even when the level of malt modification increased, although the corresponding protein spots in cultivars B and C decreased. We analyzed these protein spots by peptide mass finger printing using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. As a result, all of these spots were identified as barley dimeric alpha-amylase inhibitor-I (BDAI-I). These results suggest that BDAI-I is an important contributor to beer foam stability.

Serpins in plants and green algae

Control of proteolysis is important for plant growth, development, responses to stress, and defence against insects and pathogens. Members of the serpin protein family are likely to play a critical role in this control through irreversible inhibition of endogenous and exogenous target proteinases. Serpins have been found in diverse species of the plant kingdom and represent a distinct clade among serpins in multicellular organisms. Serpins are also found in green algae, but the evolutionary relationship between these serpins and those of plants remains unknown. Plant serpins are potent inhibitors of mammalian serine proteinases of the chymotrypsin family in vitro but, intriguingly, plants and green algae lack endogenous members of this proteinase family, the most common targets for animal serpins. An Arabidopsis serpin with a conserved reactive centre is now known to be capable of inhibiting an endogenous cysteine proteinase. Here, knowledge of plant serpins in terms of sequence diversity, inhibitory specificity, gene expression and function is reviewed. This was advanced through a phylogenetic analysis of amino acid sequences of expressed plant serpins, delineation of plant serpin gene structures and prediction of inhibitory specificities based on identification of reactive centres. The review is intended to encourage elucidation of plant serpin functions.

Proteomic identification of technologically modified proteins in malt by combination of protein fractionation using convective interaction media and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

A method for the fast separation of proteins and identification of their modifications based on the use of monolithic chromatographic media and mass spectrometric techniques is described. This method has been developed and applied to the analysis of malt proteins and its posttranslational modifications (glycation). Glycation, one of the most common forms of posttranslational modifications (PTM), can be detected in both biological and industrial samples. Our attention was focused on the investigations of possible chemical modifications of water-soluble barley proteins during malting process by combination of anion-exchange chromatography with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). The malt extract was directly fractioned by anion-exchange chromatography using short monolithic columns and a linear gradient from 0 to 700 mM NaCl. Sufficient fractionation was obtained for malt sample, which demonstrates the potential of anion-exchange chromatography on this type of column. Proteins in separated fractions were identified by MALDI-TOF/TOF MS. Our proteomic analysis provided the identification of the major proteins present in the malt that were found to be heterogeneously glycated after malting. One of these proteins: nonspecific lipid transfer protein 1 (LTP1) can be used as a marker for characterization of glycation during malting. This protein and its modifications can be easily determined by the developed method.

Inhibitory plant serpins with a sequence of three glutamine residues in the reactive center

Serpins appear to be ubiquitous in eukaryotes, except fungi, and are also present in some bacteria, archaea and viruses. Inhibitory serpins with a glutamine as the reactive-center P1 residue have been identified exclusively in a few plant species. Unique serpins with a reactive center sequence of three Gln residues at P3-P1 or P2-P1' were isolated from barley and wheat grain, respectively. Barley BSZ3 was an irreversible inhibitor of chymotrypsin, with a second-order association rate constant for complex formation k(a)' of the order of 10(4) M(-1) s(-1); however, only a minor fraction of the serpin molecules reacted with chymotrypsin, with the majority insensitive to cleavage in the reactive center loop. Wheat WSZ3 was cleaved specifically at P8 Thr and was not an inhibitor of chymotrypsin. These reactive-center loops may have evolved conformations that are optimal as inhibitory baits for proeinases that specifically degrade storage prolamins containing Gln-rich repetitive sequences, most likely for digestive proteinases of insect pests or fungal pathogens that infect cereals. An assembled full-length amino acid sequence of a serpin expressed in cotton boll fiber (GaZ1) included conserved regions essential for serpin-proteinase interaction, suggesting inhibitory capacity at a putative reactive center P2-P2' with a sequence of four Gln residues.

Probing heat-stable water-soluble proteins from barley to malt and beer

Proteins determine the quality of barley in malting and brewing end-uses. In this regard, water-soluble barley proteins play a major role in the formation, stability, and texture of head foams. Our objective was to survey the barley seed proteins that could be involved in the foaming properties of beer. Therefore, two-dimensional (2-D) electrophoresis and mass spectrometry were combined to highlight the barley proteins that could resist the heating treatments occurring during malting and brewing processes. As expected, from barley to malt and to beer, most of the heat-stable proteins are disulfide-rich proteins, implicated in the defense of plants against their bio-aggressors, e.g., serpin-like chymotrypsin inhibitors (protein Z), amylase and amylase-protease inhibitors, and lipid transfer proteins (LTP1 and LTP2). For LTP1s, the complex pattern displayed in 2-D electrophoresis could be related to some chemical modifications already described elsewhere, such as acylation or glycation through Maillard reactions, which occur on malting. Our proteomics approach allowed the identification of the numerous proteins present in beer in addition to the major ones already described. The involvement of these proteins in the quality of beer foam can now be evaluated.

Barley lipid transfer protein, LTP1, contains a new type of lipid-like post-translational modification

In plants a group of proteins termed nonspecific lipid transfer proteins are found. These proteins bind and catalyze transfer of lipids in vitro, but their in vivo function is unknown. They have been suggested to be involved in different aspects of plant physiology and cell biology, including the formation of cutin and involvement in stress and pathogen responses, but there is yet no direct demonstration of an in vivo function. We have found and characterized a novel post-translational modification of the barley nonspecific lipid transfer protein, LTP1. The protein-modification bond is of a new type in which an aspartic acid in LTP1 is bound to the modification through what most likely is an ester bond. The chemical structure of the modification has been characterized by means of two-dimensional homo- and heteronuclear nuclear magnetic resonance spectroscopy as well as mass spectrometry and is found to be lipid-like in nature. The modification does not resemble any standard lipid post-translational modification but is similar to a compound with known antimicrobial activity.

Surprisingly high stability of barley lipid transfer protein, LTP1, towards denaturant, heat and proteases

Barley LTP1 belongs to a large family of plant proteins termed non-specific lipid transfer proteins. The in vivo function of these proteins is unknown, but it has been suggested that they are involved in responses towards stresses such as pathogens, drought, heat, cold and salt. Also, the proteins have been suggested as transporters of monomers for cutin synthesis. We have analysed the stability of LTP1 towards denaturant, heat and proteases and found it to be a highly stable protein, which apparently does not denature at temperatures up to 100 degrees C. This high stability may be important for the biological function of LTP1.