Nonviral vector loaded collagen sponges for sustained gene delivery in vitro and in vivo

Fibrin hydrogels for non-viral vector delivery in vitro

Fibrin based hydrogels have been employed in vitro as a scaffold to promote tissue formation and investigate underlying molecular mechanisms. These hydrogels support a variety of cellular processes, and are being developed to enhance the presentation of biological cues, or to tailor the biological cues for specific tissues. The presentation of these cues could alternatively be enhanced through gene delivery, which can be employed to induce the expression of tissue inductive factors in the local environment. This report investigates gene delivery within fibrin hydrogels for two in vitro models of tissue growth: i) cell encapsulation within and ii) cell seeding onto the hydrogel. Naked plasmid and lipoplexes can be efficiently entrapped within the hydrogel, and after 1 day in solution more than 70% of the entrapped DNA is retained within the gel, with a sustained release observed for at least 19 days. Encapsulated lipoplexes did not aggregate and retain their original size. Transgene expression in vitro by delivery of lipoplexes was a function of the fibrinogen and DNA concentration. For encapsulated cells, all cells had intracellular plasmid and transgene expression persisted for at least 10 days, with maximal levels achieved at day 1. For cell infiltration, expression levels were less than those observed for encapsulation, and expression increased throughout the culture period. The increasing expression levels suggest that lipoplexes retain their activity after encapsulation; however, interactions between fibrin and the lipoplexes likely limit internalization. The inclusion of non-viral vectors into fibrin-based hydrogels can be employed to induce transgene expression of encapsulated and infiltrating cells, and may be employed with in vitro models of tissue growth to augment the intrinsic bioactivity of fibrin.

Dendrimer/DNA complexes encapsulated functional biodegradable polymer for substrate-mediated gene delivery

BACKGROUND

To overcome the extracellular barriers in gene delivery and direct gene delivery to target tissues, substrate-mediated transfection, which sustains the release of naked DNA or vector/DNA complexes, and also supports cell growth, has been developed.

METHODS

In the present study, polyamidoamine (PAMAM) dendrimer/DNA complexes encapsulated functional biodegradable polymer films for substrate-mediated gene delivery were prepared. To maintain the activity of DNA during dehydration, the dendrimer/DNA complexes were encapsulated in a water soluble polymer, poly alpha,beta-[N-(2-hydroxyethyl)-(L)-aspartamide], and then deposited on or sandwiched in functional polymer films with a fast degradation rate to mediate gene transfection. The in vitro gene transfections of pGL3-Luc and pEGFP-C1 plasmids in HEK293 cells mediated by different films were studied. For comparison, the transfection mediated by the film fabricated by conventional linear poly((DL)-lactide) was also investigated.

RESULTS

The expression of pGL3-Luc and pEGFP-C1 plasmids could effectively be mediated by the PAMAM/DNA complexes deposited or sandwiched polymer films, with transfection efficiencies comparable to that of solution-based transfections. The cells on the functionalized star poly((DL)-lactide) film exhibited much higher gene expression compared to the cells on the conventional linear poly((DL)-lactide) film because the fast degradation rate of star poly((DL)-lactide) facilitated the access of PAMAM/DNA complexes for the cells seeded on the film. In addition, the films did not exhibit any additional cytotoxicity to the cells during the degradation and transfection.

CONCLUSIONS

The fast degrading functional polymer has great potential for localized transfection.

A fibrin glue composition as carrier for nucleic acid vectors

PURPOSE

Gene delivery from biomaterials has become an important tool in tissue engineering. The purpose of this study was to generate a gene vector-doted fibrin glue as a versatile injectable implant to be used in gene therapy supported tissue regeneration.

METHODS

Copolymer-protected polyethylenimine(PEI)-DNA vectors (COPROGs), naked DNA and PEI-DNA were formulated with the fibrinogen component of the fibrin glue TISSUCOL and lyophilized. Clotting parameters upon rehydration and thrombin addition were measured, vector release from fibrin clots was determined. Structural characterizations were carried out by electron microscopy. Reporter and growth factor gene delivery to primary keratinocytes and chondrocytes in vitro was examined. Finally,chondrocyte colonized clots were tested for their potency in cartilage regeneration in a osteochondral defect model.

RESULTS

The optimized glue is based on the fibrinogen component of TISSUCOL, a fibrin glue widely used in the clinics, co-lyophilized with copolymer-protected polyethylenimine(PEI)- DNA vectors (COPROGs). This material, when rehydrated, forms vector-containing clots in situ upon thrombin addition and is suitable to mediate growth factor gene delivery to primary keratinocytes and primary chondrocytes admixed before clotting. Unprotected PEI-DNA in the same setup was comparatively unsuitable for clot formation while naked DNA was ineffective in transfection. Naked DNA was released rapidly from fibrin clots (>70% within the first seven days) in contrast to COPROGs which remained tightly immobilized over extended periods of time (0.29% release per day). Electron microscopy of chondrocytecolonized COPROG-clots revealed avid endocytotic vector uptake. In situ BMP-2 gene transfection and subsequent expression in chondrocytes grown in COPROG clots resulted in the upregulation of alkaline phosphatase expression and increased extracellular matrix formation in vitro. COPROG-fibrinogen preparations with admixed autologous chondrocytes when clotted in situ in osteochondral defects in the patellar grooves of rabbit femura gave rise to luciferase reporter gene expression detectable for two weeks (n=3 animals per group). However, no significant improvement in cartilage formation in osteochondral defects filled with autologous chondrocytes in BMP-2-COPROG clots was achieved in comparison to controls (n=8 animals per group).

CONCLUSIONS

COPROGs co-lyophilized with fibrinogen are a simple basis for an injectable fibrin gluebased gene-activated matrix. The preparation can be used is complete analogy to fibrin glue preparations that are used in the clinics. However, further improvements in transgene expression levels and persistence are required to yield cartilage regeneration in the osteochondral defect model chosen in this study.

The biodegradability of poly(Pro-Hyp-Gly) synthetic polypeptide and the promotion of a dermal wound epithelialization using a poly(Pro-Hyp-Gly) sponge

Collagens are widely used in medical applications, but animal-derived collagens have several drawbacks, such as low thermal stability, nonspecific cell attachment, and susceptibility to contamination by infectious pathogens, such as prions, which may transfect humans. We have previously reported the chemical synthesis of polypeptides consisting of a Pro-Hyp-Gly sequence and the high thermostability of their triple-helical structure. To clarify the biomaterial characteristics of the poly(Pro-Hyp-Gly) polypeptide, we assessed its biodegradability and its capability for skin regeneration. Eight weeks after implantation, a poly(Pro-Hyp-Gly) freeze-dried sponge embedded subcutaneously into a rat dorsal area degraded at the same rate as Terudermis, which is made from bovine type I atelocollagen and is used as an artificial dermis. Surprisingly, compared with Terudermis, the poly(Pro-Hyp-Gly) sponge significantly promoted epithelialization of a full-thickness wound on a rabbit's ear pad. This chemically synthesized polypeptide may be useful as a scaffold for tissue engineering and tissue regeneration.

Dendrimer/DNA complexes encapsulated in a water soluble polymer and supported on fast degrading star poly(dl-lactide) for localized gene delivery

Polyamidoamine (PAMAM) dendrimer/DNA complexes encapsulated in a water soluble polymer, poly-alpha,beta-[N-(2-hydroxyethyl)-l-aspartamide], were supported on a cholic acid functionalized star poly(DL-lactide) film with a fast degradation rate to mediate localized gene delivery. The in vitro gene transfections of two types of cells, HEK293 and NIH3T3, were investigated. The expressions of pGL3-Luc and pEGFP-C1 plasmids in HEK293 cells indicated that the star poly(DL-lactide) supported PHEA encapsulated PAMAM/DNA complexes could effectively mediate transfection, with transfection efficiencies which were comparable to that of solution-based transfections. Whereas the PAMAM/DNA complexes directly supported on the star poly(DL-lactide) film showed a much lower expression level for HEK293, which indicated the existence of PHEA played an important role in the efficient transfection. The solid support-based transfection for NIH3T3 cells exhibited higher expressions of pGL3-Luc compared with the solution-based transfection. Encapsulating PAMAM/DNA complexes in PHEA could further improve the gene expression in NIH3T3. During the cellular transfection, the degradation of the cholic acid functionalized star poly(DL-lactide) film could be obviously detected and the degradation did not show any unfavorable effects on the gene expression, which implied this solid support-based gene delivery device had great potential for localized transfection.

Development of a slow non-viral DNA release system from PDLLA scaffolds fabricated using a supercritical CO2 technique

Polyamidoamine polymers (PAA) comprising methylene-bisacrylamide/dimethylethylene-diamine monomers were synthesized, complexed with DNA and incorporated into porous P(DL)LA scaffolds by using a supercritical CO(2) (scCO(2)) technique. Scaffolds were made in a dry state consequently there was a need to lyophilize the complexes. A statistically significant reduction of the transfection efficiency was observed in the absence of trehalose when compared to the original complex after freeze-drying. Increasing concentrations (0-10% w/v) of trehalose were added to the complex prior to freeze-drying. Structure dependent differences in DNA binding were evaluated by gel electrophoresis and thermal transition analysis. TEM and PCS showed aggregate formation after freeze-drying without trehalose. Scaffolds were characterized by pore sizes of 173 +/- 73 microm and a porosity of 71%. The transfection potential of the released DNA was investigated by seeding scaffolds with A549 cells and following firefly luciferase as a marker gene after 48 h exposure. Low but continuous levels of transfection were observed for PAA complexes during a 60-day study. Complexes made with Lipofectaminetrade mark gave initially higher levels of DNA release but no further expression was seen after 40 days. Uncomplexed DNA showed background levels of transfection. Culturing cells on 3D scaffolds showed a benefit in retention of transfection activity with time compared to 2D controls. Transfection levels could be increased when cells were grown in OptiMEM. This study demonstrated that PAA/DNA complexes incorporated into a P(DL)LA scaffold made by using scCO(2) processing exhibited a slow release and extended gene expression profile.

Biodegradable polycation and plasmid DNA multilayer film for prolonged gene delivery to mouse osteoblasts

Sustained release of functional plasmid DNA from the surfaces of materials which support cell adhesion for tissue formation could have a significant impact on gene therapy and tissue engineering. We report here layer-by-layer assembled multilayer film from a degradable cationic poly(2-aminoethyl propylene phosphate) and plasmid DNA encoding for enhanced green fluorescent protein (EGFP) for mouse osteoblast cell adhesion and prolonged gene delivery. Multilayer film growth was monitored by UV spectrophotometry and intensity of absorbance at 260 nm related to incorporated DNA increased in an exponential manner with increase the number of deposited polymer and plasmid layers. It degraded upon incubation in phosphate-buffered saline (PBS) at 37 degrees C and sustained the release of bioactive plasmid DNA up to 2 months. The multilayer film facilitated initial mouse osteoblast cell adhesion onto the surface and enhanced cellular alkaline phosphatase activity and calcium accumulation. It sustained delivering transcriptional active DNA to mouse osteoblast cells cultured on the film, and directly prolonged gene expression in the presence of serum without any exogenous transfection agent. This biodegradable multilayer assembly is promising for the local and sustained delivery of plasmid DNA and such a layer-by-layer system suggests an alternative method for plasmid DNA incorporation which may be useful for surface modification of implanted materials or scaffold for gene therapy and tissue regeneration.

Biomaterial-mediated retroviral gene transfer using self-assembled monolayers

Biomaterial-mediated gene delivery has recently emerged as a promising alternative to conventional gene transfer technologies that focus on direct delivery of viral vectors or DNA-polymer/matrix complexes. However, biomaterial-based strategies have primarily targeted transient gene expression vehicles, including plasmid DNA and adenovirus particles. This study expands on this work by characterizing biomaterial properties conducive to the surface immobilization of retroviral particles and subsequent transduction of mammalian cells at the cell-material interface. Self-assembled monolayers (SAMs) of functionally-terminated alkanethiols on gold were used to establish biomaterial surfaces of defined chemical composition. Gene transfer was observed to be greater than 90% on NH(2)-terminated surfaces, approximately 50% on COOH-functionalized surfaces, and undetectable on CH(3)-terminated SAMs, similar to controls of tissue culture-treated polystyrene. Gene delivery via the NH(2)-SAM was further characterized as a function of retrovirus coating time, virus concentration, and cell seeding density. Finally, SAM-mediated gene delivery was comparable to fibronectin- and poly-l-lysine-based methods for gene transfer. This work is significant to establishing safe and effective gene therapy strategies, developing efficient methods for gene delivery, and supporting recent progress in the field of biomaterial-mediated gene transfer.

Matrices and scaffolds for DNA delivery in tissue engineering

Regenerative medicine aims to create functional tissue replacements, typically through creating a controlled environment that promotes and directs the differentiation of stem or progenitor cells, either endogenous or transplanted. Scaffolds serve a central role in many strategies by providing the means to control the local environment. Gene delivery from the scaffold represents a versatile approach to manipulating the local environment for directing cell function. Research at the interface of biomaterials, gene therapy, and drug delivery has identified several design parameters for the vector and the biomaterial scaffold that must be satisfied. Progress has been made towards achieving gene delivery within a tissue engineering scaffold, though the design principles for the materials and vectors that produce efficient delivery require further development. Nevertheless, these advances in obtaining transgene expression with the scaffold have created opportunities to develop greater control of either delivery or expression and to identify the best practices for promoting tissue formation. Strategies to achieve controlled, localized expression within the tissue engineering scaffold will have broad application to the regeneration of many tissues, with great promise for clinical therapies.

Non-viral vector delivery from PEG-hyaluronic acid hydrogels

Hydrogels have been widely used in tissue engineering as a support for tissue formation or to deliver non-viral gene therapy vectors locally. Hydrogels that combine these functionalities can provide a fundamental tool to promote specific cellular processes leading to tissue formation. This report investigates controlled release of gene therapy vectors from hydrogels as a function of the physical properties for both the hydrogel and the vector. Hydrogels were formed by photocrosslinking acryl-modified hyaluronic acid (HA) with a 4-arm poly(ethylene glycol) (PEG) acryl. The polymer content, and relative composition of HA and PEG modulated the swelling ratio, water content, and degradation, which can influence transport of the vector through the hydrogel. All hydrogels had a water content of 94% or higher, though the water content and swelling ratio increased with a decrease in the PEG:HA ratio. Plasmids were stably incorporated into the hydrogel, with a majority of the release occurring during the initial 2 days. For incubation in buffer, the cumulative release increased with a decreasing PEG or increasing HA content, with approximately 20% to 80% released during the first week depending on the hydrogel composition. Hydrogels incubated in hyaluronidase, an enzyme that degrades HA, significantly increased plasmid release for hydrogels containing 4% PEG and 4% HA-Acryl. The encapsulation of plasmid complexed with polyethylenimine had less than 14% of the complexes released from the hydrogel both in the presence and absence of hyaluronidase. The limited release of the complexes likely results from the complex size and interactions between the vector and hydrogel. These studies demonstrate the dependence of non-viral vector release on the physical properties of the hydrogel and the vector, suggesting vector and hydrogel designs for maximizing localized delivery of non-viral vectors.

Gene therapy used for tissue engineering applications

This review highlights the advances at the interface between tissue engineering and gene therapy. There are a large number of reports on gene therapy in tissue engineering, and these cover a huge range of different engineered tissues, different vectors, scaffolds and methodology. The review considers separately in-vitro and in-vivo gene transfer methods. The in-vivo gene transfer method is described first, using either viral or non-viral vectors to repair various tissues with and without the use of scaffolds. The use of a scaffold can overcome some of the challenges associated with delivery by direct injection. The ex-vivo method is described in the second half of the review. Attempts have been made to use this therapy for bone, cartilage, wound, urothelial, nerve tissue regeneration and for treating diabetes using viral or non-viral vectors. Again porous polymers can be used as scaffolds for cell transplantation. There are as yet few comparisons between these many different variables to show which is the best for any particular application. With few exceptions, all of the results were positive in showing some gene expression and some consequent effect on tissue growth and remodelling. Some of the principal advantages and disadvantages of various methods are discussed.

Collagen scaffolds for nonviral IGF-1 gene delivery in articular cartilage tissue engineering

This study investigated the use of a type II collagen-glycosaminoglycan (CG) scaffold as a nonviral gene delivery vehicle for facilitating gene transfer to seeded adult articular chondrocytes to produce an elevated, prolonged and local expression of insulin-like growth factor (IGF)-1 for enhancing cartilage regeneration. Gene-supplemented CG (GSCG) scaffolds were synthesized by two methods: (1) soaking a pre-cross-linked CG scaffold in a plasmid solution followed by a freeze-drying process, and (2) chemically cross-linking the plasmid DNA to the scaffold. Two different plasmid solutions were also compared: (1) naked plasmid IGF-1 alone, and (2) plasmid IGF-1 with a lipid transfection reagent. Plasmid release studies revealed that cross-linking the plasmid to the CG scaffold prevented passive bolus release of plasmid and resulted in vector release controlled by scaffold degradation. In chondrocyte-seeded GSCG scaffolds, prolonged and elevated IGF-1 expression was enhanced by using the cross-linking method of plasmid incorporation along with the addition of the transfection reagent. The sustained level of IGF-1 overexpression resulted in significantly higher amounts of tissue formation, chondrocyte-like cells, GAG accumulation, and type II collagen production, compared to control scaffolds. These findings demonstrate that CG scaffolds can serve as nonviral gene delivery vehicles of microgram amounts of IGF-1 plasmid (<10 microg per scaffold) to provide a locally sustained therapeutic level of overexpressed IGF-1, resulting in enhanced cartilage formation.

Synthesis of Oligo(ethylenediamino)-β-Cyclodextrin Modified Gold Nanoparticle as a DNA Concentrator

A novel oligo(ethylenediamino)-beta-cyclodextrin-modified gold nanoparticle (OEA-CD-NP) was synthesized as a vector for DNA binding and comprehensively investigated by means of absorption and circular dichroism spectroscopies as well as transmission electron microscopy, and its plasmid transfection efficiency as a carrier into cultivated cells in vitro was also evaluated. Possessing many hydrophobic cavities at the outer space, OEA-CD-NP may have a capability of carrying biological and/or medicinal substrates into cells, which will make it potentially applicable in many fields of material science and biological technology. In contrast with OEA-CD-NP, the oligo(ethylenediamino)-lipoic amido-modified gold nanoparticle (OEA-L-NP) without CD was synthesized to investigate the interaction with DNA. The results showed that OEA-L-NPs could only weakly bind DNA.

Stat5 constitutive activation rescues defects in spinal muscular atrophy

Proximal spinal muscular atrophy (SMA) is a motor neuron degeneration disorder for which there is currently no effective treatment. Here, we report three compounds (sodium vanadate, trichostatin A and aclarubicin) that effectively enhance SMN2 expression by inducing Stat5 activation in SMA-like mouse embryonic fibroblasts and human SMN2-transfected NSC34 cells. We found that Stat5 activation enhanced SMN2 promoter activity with increase in both full-length and deletion exon 7 SMN transcripts in SMN2-NSC34 cells. Knockdown of Stat5 expression disrupted the effects of sodium vanadate on SMN2 activation but did not influence SMN2 splicing, suggesting that Stat5 signaling is involved in SMN2 transcriptional regulation. In addition, constitutive activation of Stat5 mutant (Stat5A1*6) profoundly increased the number of nuclear gems in SMA-patient lymphocytes and reduced SMA-like motor neuron axon outgrowth defects. These results demonstrate that Stat5 signaling could be a possible pharmacological target for treating SMA.

Unilateral Lung-Selective Gene Transfer Following the Administration of Naked Plasmid DNA onto the Pulmonary Pleural Surface in Mice

The purpose of the present study was to examine unilateral lung-selective gene transfer following the administration of naked plasmid DNA (pDNA) onto the pulmonary pleural surface in mice. Naked pDNA was administered intravenously, intraperitoneally, and instilled onto the right pulmonary pleural surface. Four hours later, right pulmonary pleural surface instillation of naked pDNA resulted in high gene expression in the right lung. On the contrary, intravenous and intraperitoneal administration of naked pDNA resulted in no detectable gene expression. After instilling naked pDNA onto the right or left pulmonary pleural surface, gene expressions in the applied lung were significantly higher than those in the other lung and tissues. In addition, gene expressions were detected only in the intrathoracic tissues, not in the intraperitoneal tissues. Four hours after instillation of naked pDNA onto the right pulmonary pleural surface, gene expression in the right lung was the highest, and thereafter gene expression in the right lung decreased gradually. This novel gene transfer method is expected to be a safe and effective treatment against serious lung diseases.

Thiolated Chitosan/DNA Nanocomplexes Exhibit Enhanced and Sustained Gene Delivery

PURPOSE

Thiolated chitosan appears to possess enhanced mucoadhesiveness and cell penetration properties, however, its potential in gene-drug delivery remains unknown. Herein, we report on a highly effective gene delivery system utilizing a 33-kDa thiol-modified chitosan derivative.

METHODS

Thiolated chitosan was prepared by the reaction with thioglycolic acid. Nanocomplexes of unmodified chitosan or thiolated chitosan with plasmid DNA encoding green fluorescenct protein (GFP) were characterized for their size, zeta potential, their ability to bind and protect plasmid DNA from degradation. The transfection efficiency of thiolated chitosan and sustained gene expression were evaluated in various cell lines in vitro and in Balb/c mice in vivo.

RESULTS

Thiolated chitosan-DNA nanocomplexes ranged in size from 75 to 120 nm in diameter and from +2.3 to 19.7 mV in zeta potential, depending on the weight ratio of chitosan to DNA. Thiolated chitosan, CSH360, exhibited effective physical stability and protection against DNase I digestion at a weight ratio>or=2.5:1. CSH360/DNA nanocomplexes induced significantly (P<0.01) higher GFP expression in HEK293, MDCK and Hep-2 cell lines than unmodified chitosan. Nanocomplexes of disulphide-crosslinked CSH360/DNA showed a sustained DNA release and continuous expression in cultured cells lasting up to 60 h post transfection. Also, intranasal administration of crosslinked CSH360/DNA nanocomplexes to mice yielded gene expression that lasted for at least 14 days.

CONCLUSIONS

Thiolated chitosans condense pDNA to form nanocomplexes, which exhibit a significantly higher gene transfer potential and sustained gene expression upon crosslinking, indicating their great potential for gene therapy and tissue engineering.

Protective efficiency of dendrosomes as novel nano-sized adjuvants for DNA vaccination against birch pollen allergy

We evaluated the use of a novel gene porter (Den123--a nontoxic self-assembled dendritic spheroidal nanoparticle made of biodegradable monomers), aiming to enhance and improve the desired immune response in protection from allergy. Footpad DNA immunization in Balb/c mice was done three times using the Bet v 1a gene with or without Den123 with 2-week intervals followed by sensitization with rBetv1 (5 microg) in alum twice in a weekly interval. Different doses of pCMV-Betv1 were used (10 microg and 100 microg). The protective role of different formulations was evaluated by measuring the IgG1, IgG2a and IgE antibody production, cytokine release of isolated splenocytes and beta-hexosaminidase release from the RBL cells. Higher and increasing ratios of IgG2a/IgG1 were seen in mice which received plasmids in combination with Den123. Den123 and DNA vaccine synergistically enhanced the Interferon gamma released from splenocytes. In the presence of Den123, IgE inhibition was independent of the dose and type of the injected DNA. All DNA-pre-immunized mice demonstrated low basophil degranulation. It is therefore concluded that administration of the DNA entrapped in Den123 nanoparticles results in sustained release of plasmids, Th1/Th2 balanced immune response with promising IgE inhibition. Also higher amounts of DNA contributed to stronger Th1 response.

Polymers for gene delivery across length scales

A number of human diseases stem from defective genes. One approach to treating such diseases is to replace, or override, the defective genes with normal genes, an approach called 'gene therapy'. However, the introduction of correctly functioning DNA into cells is a non-trivial matter, and cells must be coaxed to internalize, and then use, the DNA in the desired manner. A number of polymer-based synthetic systems, or 'vectors', have been developed to entice cells to use exogenous DNA. These systems work across the nano, micro and macro length scales, and have been under continuous development for two decades, with varying degrees of success. The design criteria for the construction of more-effective delivery vectors at each length scale are continually evolving. This review focuses on the most recent developments in polymer-based vector design at each length scale.

Effect of solution composition of plasmid DNA on gene transfection following liver surface administration in mice

We investigated the effect of plasmid DNA (pDNA) solution composition on gene transfection following liver surface administration in mice. Gene transfection experiments in situ and in vivo were performed using the following pDNA solutions: dextrose solution, NaCl solution, phosphate buffer, phosphate-buffered saline, Tris/HCl buffer with EDTA, Tris/HCl buffer with EDTA and Triton X-100, and water. In in situ experiments, we used a glass cylindrical diffusion cell that limited the contact area between the liver surface and the naked pDNA solution. The gene transfection at the site of diffusion cell attachment increased in hypotonic solution, and decreased in hypertonic solution, compared with isotonic solution. In in vivo experiments, instillation of naked pDNA solution onto the liver surface using a micropipette caused no significant differences in gene transfection in the applied lobe. These results suggest that it is important to select the optimal pDNA solution composition to control the gene transfection.

Synthesis of poly(Pro-Hyp-Gly)(n) by direct poly-condensation of (Pro-Hyp-Gly)(n), where n=1, 5, and 10, and stability of the triple-helical structure

Pro-Hyp-Gly is a characteristic amino acid sequence found in fibrous collagens, and (Pro-Hyp-Gly)(10), which has been widely used as a collagen-model peptide, forms a stable triple-helical structure. Here, we synthesized polypeptides consisting of the Pro-Hyp-Gly sequence by direct poly-condensation of (Pro-Hyp-Gly)(n), where n=1, 5, and 10, using 1-hydroxybenzotriazole and 1-ethyl-3-(3-dimethyl-aminopropyl)-carbodiimide hydrochloride in both phosphate buffer (pH=7.4) and dimethylsulfoxide (DMSO) solutions for 48 h at 20 degrees C. The reaction of (Pro-Hyp-Gly)(5) and (Pro-Hyp-Gly)(10) in DMSO successfully gave polypeptides with molecular weights over 10,000, whereas low molecular weight products were obtained by reaction in phosphate buffer (pH=7.4). In contrast, Pro-Hyp-Gly at a concentration of 50 mg/mL in phosphate buffer (pH=7.4) gave polypeptides with molecular weights over 10,000. The Fourier transform infrared (FTIR) and (1)H nuclear magnetic resonance (NMR) spectra of poly(Pro-Hyp-Gly)(10) revealed that the polymerization of (Pro-Hyp-Gly)(10) described in this report had no side reactions. Each polypeptide obtained shows a collagen-like triple-helical structure, and the triple-helical structures of poly(Pro-Hyp-Gly) and poly(Pro-Hyp-Gly)(10) were stable up to T=80 degrees C, which suggests that the high molecular weight promotes stability of the triple-helical structure, in addition to the high Hyp content. Furthermore, transmission electron microscopy (TEM) observations show that poly(Pro-Hyp-Gly)(10) aggregates to form nanofiber-like structures about 10 nm in width, which suggests that a Pro-Hyp-Gly repeating sequence contains enough information for triple-helix formation, and for subsequent nanofiber-like structure formation.

Collagen gel delivery of Tgf-beta3 non-viral plasmid DNA in rat osteoblast and calvarial culture

Different forms of collagen as a carrier for naked plasmid DNA have shown potential as vehicles for therapeutic gene delivery and tissue engineering. The objective of this study was to determine the suitability of a dense collagen gel as a vehicle for sustained delivery of plasmid DNA in cell and organ culture. Plasmid DNA encoding Tgf-beta(3) was combined with collagen gel. DNA released into the media was measured by Pico-Green spectrophotometry. Results showed that DNA was released from the collagen gel at a gradual rate for up to 14 days. To evaluate collagen-mediated transfection in tissue, calvariae were exposed to collagen containing plasmid encoding GFP or DsRed. Transfection was visualized by fluorescence localized to tissue adjacent to the vehicle. To evaluate protein production, fetal rat calvarial osteoblasts were cultured with a collagen/Tgf-beta(3) plasmid mixture or in media containing plasmid alone. Media was collected at various time points to measure Tgf-beta(3) protein production. ELISA assays showed that collagen-transfected osteoblasts demonstrated an elevated Tgf-beta(3) protein production for up to 14 days. Therefore, collagen delivery of viable plasmid DNA created a sustained transient transfection of calvarial osteoblasts resulting in prolonged and elevated growth factor production. Together, these results suggest that use of collagen gel as a vehicle may provide a strategy to achieve localized and controlled, non-viral gene delivery in vivo.

Design of modular non-viral gene therapy vectors

Gene delivery has numerous potential applications both clinically and for basic science research. Non-viral vectors represent the long-term future of gene therapy and biomaterials are a critical component for the development of efficient delivery systems. Biomaterial development combined with fundamental studies of virus function and cellular processes will enable the molecular level design of modular vectors. Vectors are being developed based on cationic polymers or lipids that contain functional groups to mediate appropriate interactions with the extracellular environment or to interface with specific cellular processes. This review describes recent progress on the development of biomaterials for non-viral vectors and highlights opportunities for future development. Ultimately, efficient vectors will expand the traditional applications of gene therapy within the clinic and may enable numerous other opportunities within diagnostics, biotechnology, and basic science research.

Factors That Influence Transgene Expression and Cell Viability on DNA–PEI-Seeded Collagen Films

Gene delivery from tissue-engineering devices has the potential to improve healing, but better regulation of the level and duration of gene expression is needed. We hypothesized that transgene expression could be controlled by varying the fabrication and soaking parameters used in making collagen- based gene delivery scaffolds. Collagen films were made from acid-insoluble type I bovine dermal collagen and seeded with plasmid DNA encoding firefly luciferase, complexed with polyethylenimine. By varying the thickness of the films, the volume of the DNA soak solution, and the pH of the DNA soak solution, and by cross-linking the films, we identified variable combinations that produce significantly different levels of cell number and transgene expression in L-929 cells in vitro. Increasing film thickness or soak volume increased overall reporter gene expression. Decreasing film thickness or soak volume decreased cell number but did not significantly change reporter gene expression per cell. Cross-linking by ultraviolet irradiation (before adding the DNA) significantly decreased transgene expression, probably because of decreased swelling of the collagen film. These results suggest that collagen-based biomaterials may be designed and fabricated to induce, in a controlled fashion, various levels of cellularity and transgene expression.

Gene delivery through cell culture substrate adsorbed DNA complexes

Efficient gene delivery is a fundamental goal of biotechnology and has numerous applications in both basic and applied science. Substrate-mediated delivery and reverse transfection enhance gene transfer by increasing the concentration of DNA in the cellular microenvironment through immobilizing a plasmid to a cell culture substrate prior to cell seeding. In this report, we examine gene delivery of plasmids that were complexed with cationic polymers (polyplexes) or lipids (lipoplexes) and subsequently immobilized to cell culture or biomaterial substrates by adsorption. Polyplexes and lipoplexes were adsorbed to either tissue culture polystyrene or serum-adsorbed tissue culture polystyrene. The quantity of DNA immobilized increased with time of exposure, and the deposition rate and final amount deposited depended upon the properties of the substrate and complex. For polyplexes, serum modification enhanced reporter gene expression up to 1500-fold relative to unmodified substrates and yielded equivalent or greater expression compared to bolus delivery. For lipoplexes, serum modification significantly increased the number of transfected cells relative to unmodified substrates yet provided similar levels of expression. Immobilized complexes transfect primary cells with improved cellular viability relative to bolus delivery. Finally, this substrate-mediated delivery approach was extended to a widely used biomaterial, poly(lactide-co-glycolide). Immobilization of DNA complexes to tissue culture polystyrene substrates can be a useful tool for enhancing gene delivery for in vitro studies. Additionally, adapting this system to biomaterials may facilitate application to fields such as tissue engineering.

Unilateral Kidney-Selective Gene Transfer Following the Administration of Naked Plasmid DNA to the Kidney Surface in Mice

We developed a gene transfer following the administration of naked plasmid DNA (pDNA) to the kidney surface in mice, and found that the luciferase levels produced in the applied kidney were significantly higher than those produced in another kidney. In contrast, stable renal gene expression was not observed in the case of intraperitoneal or intravenous administration of pDNA. The level of gene expression after instillation of pDNA to the kidney surface reached maximum at 12 h and gradually diminished thereafter. The production of luciferase was saturated at 5 microg of pDNA, and was not affected by instillation volume. Furthermore, pDNA uptake from the kidney surface was proved by in situ experiments using a glass-made diffusion cell. We demonstrated a novel unilateral kidney-selective gene transfer following the administration of naked pDNA to the kidney surface in mice.

Synthetic Biocompatible Cyclodextrin-Based Constructs for Local Gene Delivery to Improve Cutaneous Wound Healing

The localized, sustained delivery of growth factors for wound healing therapy is actively being explored by gene transfer to the wound site. Biocompatible matrices such as bovine collagen have demonstrated usefulness in sustaining gene therapy vectors that express growth factors in local sites for tissue repair. Here, new synthetic biocompatible materials are prepared and shown to deliver a protein to cultured cells via the use of an adenoviral delivery vector. The synthetic construct consists of a linear, beta-cyclodextrin-containing polymer and an adamantane-based cross-linking polymer. When the two polymers are combined, they create an extended network by the formation of inclusion complexes between the cyclodextrins and adamantanes. The properties of the network are altered by controlling the polymer molecular weights and the number of adamantanes on the cross-linking polymer, and these modifications and others such as replacement of the beta-cyclodextrin (host) and adamantane (guest) with other cyclodextrins (hosts such as alpha, gamma, and substituted members) and inclusion complex forming molecules (guests) provide the ability to rationally design network characteristics. Fibroblasts exposed to these synthetic constructs show proliferation rates and migration patterns similar to those obtained with collagen. Gene delivery (green fluorescent protein) to fibroblasts via the inclusion of adenoviral vectors in the synthetic construct is equivalent to levels observed with collagen. These in vitro results suggest that the synthetic constructs are suitable for in vivo tissue repair applications.

Controlled release systems for DNA delivery

Adapting controlled release technologies to the delivery of DNA has the potential to overcome extracellular barriers that limit gene therapy. Controlled release systems can enhance gene delivery and increase the extent and duration of transgene expression relative to more traditional delivery methods (e.g., injection). These systems typically deliver vectors locally, which can avoid distribution to distant tissues, decrease toxicity to nontarget cells, and reduce the immune response to the vector. Delivery vehicles for controlled release are fabricated from natural and synthetic polymers, which function either by releasing the vector into the local tissue environment or by maintaining the vector at the polymer surface. Vector release or binding is regulated by the effective affinity of the vector for the polymer, which depends upon the strength of molecular interactions. These interactions occur through nonspecific binding based on vector and polymer composition or through the incorporation of complementary binding sites (e.g., biotin-avidin). This review examines the delivery of nonviral and viral vectors from natural and synthetic polymers and presents opportunities for continuing developments to increase their applicability.

Surfection: a new platform for transfected cell arrays

Efficient high-throughput expression of genes in mammalian cells can facilitate large-scale functional genomic studies. Towards this aim, we developed a simple yet powerful method to deliver genes into cells by cationic polymers on the surface of substrates. Transfection can be achieved by directly contacting nucleic acid-cell mixtures with the cationic substrates, e.g. polyethylenimine/collagen-coated wells. This single-step matrix-surface- mediated transfection method, termed 'surfection', can efficiently deliver multiple plasmids into cells and can successfully assay siRNA-mediated gene silencing. This technology represents the easiest method to transfer combinations of genes in large-scale arrays, and is a versatile tool for live-cell imaging and cell-based drug screening.

Novel bi- and trifunctional inhibitors of tumor-associated proteolytic systems

Serine proteases, cysteine proteases, and matrix metalloproteinases (MMPs) are involved in cancer cell invasion and metastasis. Recently, a recombinant bifunctional inhibitor (chCys-uPA19-31) directed against cysteine proteases and the urokinase-type plasminogen activator (uPA)/plasmin serine protease system was generated by introducing the uPA receptor (uPAR)-binding site of uPA into chicken cystatin (chCysWT). In the present study, we designed and recombinantly produced multifunctional inhibitors also targeting MMPs. The inhibitors comprise the N-terminal inhibitory domain of human TIMP-1 (tissue inhibitor of matrix metalloproteinase-1) or TIMP-3, fused to chCys-uPA19-31 or chCysWT. As demonstrated by various techniques, these fusion proteins effectively interfere with all three targeted protease systems. In in vitro Matrigel invasion assays, the addition of recombinant inhibitors strongly reduced invasion of ovarian cancer cells (OV-MZ-6#8). Additionally, OV-MZ-6#8 cells were stably transfected with expression plasmids encoding the various inhibitors. Synthesis and secretion of the inhibitors was verified by a newly developed ELISA, which selectively detects the recombinant proteins. Invasive capacity of inhibitor-producing cells was significantly reduced compared to vector-transfected control cells. Thus, these novel, compact, and small-size inhibitors directed against up to three different tumor-associated proteolytic systems may represent promising agents for prevention of tumor cell migration and metastasis.