Anatomic variations between Japanese and Caucasian populations in the healthy young adult knee joint

Investigating gender and ethnicity differences in proximal humeral morphology using a statistical shape model

Morphological variability in the shoulder influences the joint biomechanics and is an important consideration in arthroplasty and implant design. The objectives of this study were to quantify cortical and cancellous proximal humeral morphology and to assess whether shape variation was influenced by gender and ethnicity, with the overarching goal of informing implant design and treatment. A statistical shape model of the proximal humeral cortical and cancellous regions was developed for a training set of 84 subjects of both genders and different ethnicities. Cortical and cancellous bone geometries were reconstructed from CT scans, meshed with triangular elements, and registered to a template. Principal component analysis was applied to quantify modes of variation. Anatomical measurements were computed on the registered geometries to assess correlation with modes of variation. Parallel analysis identified six significant modes of variation, which accounted for 93% of variation in the training set and described scaling (Mode 1), inclination of the head (Modes 2 and 5), and shape of the greater tuberosity and neck region (Modes 3, 4, and 6). Size differences as described by Mode 1 were statistically significant for gender and ethnicity, where female and Asian subjects were smaller than male and Caucasian subjects, respectively; however, differences in other modes were not significant. Cortical thickness of the shaft after normalization by outer diameter was significantly larger for Asian subjects compared to Caucasian subjects. The statistical shape model quantified cortical and cancellous humeral morphology considering gender and ethnicity, providing descriptive data to support surgical planning, and implant design. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:3043-3052, 2018.

Deviation of femoral intramedullary alignment rod influences coronal and sagittal alignment during total knee arthroplasty

BACKGROUND

An intramedullary (IM) rod is used to resect the distal femur vertically to the femoral mechanical axis in the coronal plane in many cases of total knee arthroplasties (TKA). The valgus angle between the mechanical axis and the anatomical axis of the distal femur is estimated preoperatively. It is known the deviation of the IM rod in the femoral canal could influence the femoral component alignment. However, there is no published data regarding how many degrees of deviation to make with the IM rod. The purpose of this study is to measure each deviation of the IM rod using three-dimensional (3D) computer simulations.

METHODS

Preoperative CT scans on 30 knees undergoing TKA were studied. The line connecting central points at 10 and 20 cm proximal from the intercondylar notch was defined as the anatomical axis and the point at which the anatomical axis intersects the surface of the distal femur was considered as the entry point of the IM rod. The medio-lateral (ML) and antero-posterior (AP) deviations between the anatomical axis and the IM rod were measured.

RESULTS

The ML and AP deviations were 0.8 and 1.1° on average. The IM rod was deviated medio-laterally more than 1.0° in three knees (10%).

CONCLUSION

Surgeons should note the ML difference of the resection thickness of the distal femur for coronal alignment. If the ML difference varies greatly from the preoperative planning, they need to adjust at most 1.0° of valgus angle to achieve the appropriate coronal alignment. Level of evidence III, Therapeutic.

Range limitation in hip internal rotation and fifth metatarsal stress fractures (Jones fracture) in professional football players

PURPOSE

To identify unknown risk factors associated with fifth metatarsal stress fracture (Jones fracture).

METHODS

A case-controlled study was conducted among male Japanese professional football (soccer) players with (N = 20) and without (N = 40) a history of Jones fracture. Injury history and physical examination data were reviewed, and the two groups were compared. Univariate and multivariate logistic regression controlling for age, leg dominance and body mass index were used to obtain odds ratios (ORs) and 95% confidence intervals (CIs) to describe the association between physical examination data and the presence or absence of Jones fractures.

RESULTS

From 2000 to 2014, among 162 professional football club players, 22 (13.6%; 21 Asians and one Caucasian) had a history of Jones fracture. Thirteen out of 22 (60%) had a Jones fracture in their non-dominant leg. The mean range of hip internal rotation (HIR) was restricted in players with a history of Jones fracture [25.9° ± 7.5°, mean ± standard deviation (SD)] compared to those without (40.4° ± 11.1°, P < 0.0001). Logistic regression analyses demonstrated that HIR limitation increased the risk of a Jones fracture (OR = 3.03, 95% CI 1.45-6.33, P = 0.003). Subgroup analysis using data prior to Jones fracture revealed a causal relationship, such that players with a restriction of HIR were at high risk of developing a Jones fracture [Crude OR (95% CI) = 6.66 (1.90-23.29), P = 0.003, Adjusted OR = 9.91 (2.28-43.10), P = 0.002]. In addition, right HIR range limitation increased the risks of developing a Jones fracture in the ipsilateral and the contralateral feet [OR = 3.11 (1.35-7.16) and 2.24 (1.22-4.12), respectively]. Similarly, left HIR range limitation increased the risks in the ipsilateral or the contralateral feet [OR (95% CI) = 4.88 (1.56-15.28) and 2.77 (1.08-7.08), respectively].

CONCLUSION

The restriction of HIR was associated with an increased risk of developing a Jones fracture. Since the HIR range is a modifiable factor, monitoring and improving the HIR range can lead to prevent reducing the occurrence of this fracture.

LEVEL OF EVIDENCE

III.

Concomitant meniscal injury in anterior cruciate ligament reconstruction does not lead to poorer short-term post-operative outcomes

PURPOSE

The main objective was to compare post-operative outcomes in patients undergoing anterior cruciate ligament (ACL) reconstruction both with and without concomitant meniscus injury at a mean follow-up of 3.5 years. The secondary objective was to study the effect of different meniscal injury sites and treatment modalities on post-operative outcomes (PROS).

METHODS

This is a retrospective analysis of a prospectively maintained database of patients undergoing ACL reconstruction at our tertiary institution between 2009 and 2012. Age, sex, graft type, graft fixation modality, location of meniscal tear and treatment (meniscal repair or meniscectomy) were recorded in the database. PROS used included the Tegner activity scale and the Lysholm score.

RESULTS

There were no significant differences between patients with or without meniscal injury in terms of age, BMI or preoperative PROS. There was no significant difference in the post-operative outcome scores between patients with or without meniscal injury at a mean follow-up of 3.5 years. Regardless of the location of meniscal injury, the post-operative scores improved as compared to preoperative scores.

CONCLUSION

Concomitant meniscal injury in cases of ACL reconstruction is not associated with poorer short-term post-operative PROS (mean follow-up time: 3.5 years). These findings may influence management decisions and help in preoperative counselling.

LEVEL OF EVIDENCE

IV.

The tibial growth plate as a predictor of the original tibial plateau joint line as a reference for kinematically aligned total knee arthroplasty

Background

Restoration of the natural joint line is a cornerstone for kinematically aligned total knee arthroplasty (TKA). The purpose of this study was to investigate the relative orientation of the tibial growth plate (GP) with respect to the tibial plateau (TP) for possible application in predicting natural joint line for knees with highly advanced osteoarthritis patient at the time of kinematically aligned TKA.

Methods

Images from computed tomography (CT) of 27 normal knees (9 males, 18 females; mean age, 31.6 years) were studied. Geometry of the GP was extracted from CT images, and its moment-of-inertia axes were calculated for the whole GP and the medial and lateral halves. Angular orientations of each GP axis with respect to the TP plane were measured in anatomical coordinates.

Results

The TP and GP planes were oriented in 2.3 ± 1.8° of varus and 1.1 ± 1.9° of valgus relative to the tibial mechanical axis, respectively. With respect to the TP plane, the whole GP plane was inclined in 3.4 ± 1.5° of valgus. Orientation of the GP plane differed drastically between medial and lateral halves. The medial GP was in 4.9 ± 2.9° of varus and 1.8 ± 2.5° of anterior inclination, and the lateral half was in 10.4 ± 2.4° of valgus and 18.6 ± 4.0° of anterior inclination relative to the TP.

Conclusions

Angular orientation of the original TP plane can be predicted in reference to the GP plane and may provide reasonable guidance for the target bone resection angle of the tibia in kinematically aligned TKA.

Mapping of the anterior tibial profile to identify accurate reference points for sagittal alignment of tibial component in total knee arthroplasty

BACKGROUND

Although standard instrumentation is the procedure most frequently used to implant a Total Knee Arthroplasty (TKA), high rates of malalignment of tibial component are reported using this technique. Anatomical landmarks for sagittal alignment have been little investigated and the best reference axis, which parallels the mechanical axis, is yet to be established.

HYPOTHESIS

Mapping the Anterior Tibial Profile (ATP) may allow the identification of segmental zones of the ATP parallel to the mechanical axis which can be used to align the extramedullary rod.

METHODS

An intramedullary rod was positioned in line with the mechanical axis in 47 dried cadaveric tibiae. The rod was connected to a cutting jig and to an extramedullary rod. Digitalized images of lateral view radiographs were taken and the distance between the ATP and the extramedullary rod was measured at 10-mm intervals and at interpolated distances corresponding to every 2% of the tibial length.

RESULTS

Segmental portions of the ATP exhibit an alignment parallel to the mechanical axis between points located at 58% and 90% and at 62% and 88% of the tibial length. Points placed at 50% of tibial length and 5mm proximal to the ankle joint generate the longer axis parallel to the mechanical axis.

CONCLUSION

The orientation of sagittal tibial cut may be improved by aligning the extramedullary rod parallel to the ATP at definite points. Points placed at 50% of the tibial length and 5mm proximal to the ankle joint may be preferred since they generate the longer axis parallel to the mechanical axis and are more easily identified at surgery.

Does increased femoral antetorsion predispose to cartilage lesions of the patellofemoral joint?

PURPOSE

The purpose of this study was to investigate whether there was a relationship between femoral neck antetorsion and the presence and pattern of osteoarthritis of the patellofemoral joint. It was hypothesized that an increased femoral neck antetorsion (1) correlates with osteoarthritic changes of the lateral facet of the patellofemoral joint and (2) correlates with an increased lateral trochlear height and a decreased sulcus angle.

METHODS

Seventy-eight formalin-embedded cadaveric lower extremities from thirty-nine subjects with a median age of 74 years (range 60-88) were used. Surrounding soft tissues of the lower limb were removed. The femoral neck antetorsion was measured and referenced to the transepicondylar axis and the posterior condylar line. The height of the medial and lateral facet of the trochlea and the sulcus angle was measured. The location and the degree of patellofemoral cartilage degeneration were recorded. A Pearson's correlation analysis was performed to correlate the femoral neck antetorsion with the measured knee parameters.

RESULTS

No significant correlation could be found between the femoral antetorsion and cartilage degeneration of the lateral patellofemoral joint (n.s.), the height of the lateral trochlea (n.s.) and the sulcus angle (n.s.).

CONCLUSION

This study could not document that the femoral neck antetorsion and subsequent internal rotation of the distal femur correlated with the degree of degeneration of the lateral facet of the patellofemoral joint. Clinically, femoral internal rotation may play a minor role in the development of lateral patellofemoral joint degeneration.

How Much Does the Anatomical Tibial Component Improve the Bony Coverage in Total Knee Arthroplasty?

BACKGROUND

Recently, anatomical designs in total knee arthroplasty are introduced to address asymmetry of the resected tibia cutting surface. It is still not well known how much improvement would be achieved in total knee arthroplasty, especially in Asian knees.

METHODS

We evaluated the bony coverage of 4 commercially available posterior-stabilized tibial designs (3 symmetrical: NexGen, Attune, and Vega; 1 anatomical: Persona) by measuring uncovered areas over 3 different regions: lateroposterior (LP), medioposterior (MP), and mediolateral (ML) areas. The implant size was chosen based on lateral anteroposterior dimension of the implant that most closely matched the corresponding surface of tibia. The knee with over coverage <1 mm and under coverage <2 mm was regarded as having optimal fit.

RESULTS

The optimal fit of anatomical design in LP dimension was achieved in 76% of the cases, which was not significantly different from other symmetrical designs (P > .05). The anatomical tibial implant had a more optimal fit in MP and ML dimensions (48% and 42%, respectively) compared to all symmetric designs (P < .05). All symmetrical tibial designs had significant absolute underhang in MP (62%-78%) and ML (24%-34%) areas without difference. The anatomical tibial design had significant improvement for posteromedial coverage by about 69.8%-74.3% compared with the symmetrical designs.

CONCLUSION

Recently introduced anatomical tibial design improves surface coverage at the medioposterior dimension in Asian knees. Moreover, there is small improvement in ML fit compared with the symmetrical designs.

An assessment of femoral rotational alignment of mini-incision total knee arthroplasty: A comparison based on the transepicondylar line from the kneeling view and the intraoperative posterior condylar line

BACKGROUND

Rotational alignment of the distal femur is important in total knee arthroplasty. The purpose of this study is to use a roentgenographic technique to evaluate the accuracy of mini-incision total knee arthroplasty (MIS TKA) performed based on the transepicondylar line from the kneeling view.

METHODS

Totally 32 patients (aged from 64 to 80 years with an average of 70.9 years) with 46 cases of knee osteoarthritis received MIS TKA were registered. Before surgery, the condylar twist angle was measured from the kneeling view. The bone cut for the external rotation was completed, with regard to the condylar twist angle. The control group including 26 patients (aged from 50 to 89 years with an average of 69.7 years) with 42 cases of knee osteoarthritis underwent TKA with built-in cutting jig design 3 degrees of femoral external rotation. This study is a prospective continuous-time duration analysis study. The level of evidence is IIc.

RESULTS

The mean condylar twist angle was 5.1° in the experimental group and 5.4° in the control group. The mean postoperative angle between the clinical epicondylar axis and the posterior condylar line of the femoral component was 0.46°. The same postoperative angle of the built-in external rotation in the control group was 2.7°. The condylar twist angle was significantly more accurate than the built-in design.

CONCLUSION

Our result substantiates that the kneeling view is practicable and reproducible as the cutting reference for femoral external rotation. The accuracy of the kneeling view shows that the epicondylar axis can be used in smaller wound surgery, such as MIS TKA.

LEVEL OF EVIDENCE

Level IIc.

Location of the ankle center for total knee arthroplasty

BACKGROUND

The purpose of this study was to investigate the ankle center position as determined from the malleoli for total knee arthroplasty (TKA).

METHODS

We retrospectively analyzed computed tomography data from 102 patients with osteoarthritic knees. The tibial anteroposterior (AP) axis and transmalleolar axis (TMA) were used as rotational reference axes of the knee and ankle joint, respectively. With these axes, we regarded the offset distance from the intermalleolar midpoint as the position of the ankle center and investigated any angular osteotomy errors on the proximal tibia when the ankle center was assumed to the intermalleolar midpoint.

RESULTS

The mean offset distances relative to the tibial AP axis were 1.8±0.9mm medial and 4.2±1.2mm anterior, and the distances relative to the TMA were 3.0±0.9 and 3.6±1.1mm in the coronal and sagittal planes, respectively. Mean angular osteotomy errors were 0.3±0.2° in the coronal plane and 0.8±0.2° in the sagittal plane.

CONCLUSIONS

The ankle center was located around the intermalleolar midpoint. The position of the ankle center observed along the knee reference axis further approached the intermalleolar midpoint than when observed along the ankle reference axis in the coronal plane, but not in the sagittal plane. And the coronal angular osteotomy error was smaller than the sagittal error. Therefore, the intermalleolar midpoint in the coronal plane is a reliable landmark for the ankle center during TKA. However, surgeons should be cognizant of this sagittal angular error.

The Quadriceps Vector is Most Parallel to the Spherical Axis With Minimal Difference for Gender or Ethnicity

BACKGROUND

The extensor mechanism may be the key to kinematic alignment of total knee arthroplasty. The purpose of this study was to determine any differences in the direction of the quadriceps vector based on gender or ethnicity and to determine which anatomically derived alignment axis is closest to the quadriceps vector.

METHODS

Computed tomography scans and patient records for 14 Caucasians (9 men and 5 women) and 40 Japanese (19 men and 21 women) were evaluated. Three axes of alignment-anatomic, mechanical, and spherical-were identified, measured, and compared to the quadriceps vector in each case. Principal component analysis was used to determine the quadriceps vector by using 3-dimensional models of muscles on computed tomography scans.

RESULTS

No statistically significant differences in the orientation of the quadriceps vector were found based on gender or ethnicity, and the quadriceps vector was most closely aligned with the spherical axis.

CONCLUSION

Because the quadriceps is the primary knee extensor, the spherical axis therefore may be a ubiquitous guide to alignment of the arthroplasty knee based on motion.

Clinical Impact of Coexisting Patellofemoral Osteoarthritis in Japanese Patients With Medial Knee Osteoarthritis

OBJECTIVE

To evaluate the clinical impact in knee osteoarthritis (OA) of coexisting patellofemoral (PF) joint OA (PFOA) in Japanese patients with medial tibiofemoral (TF) joint OA (TFOA).

METHODS

Patients with medial knee OA (n = 143) were enrolled. The radiographic severity of the TF and PF joints, anatomic axis angle of the TF joint, patellar alignment, trochlear morphology, patellar height, and passive range of motion (ROM) of the painful knee were evaluated. Additionally, the Japanese Knee Osteoarthritis Measure (JKOM) was used to investigate the association between the presence of PFOA and clinical symptoms.

RESULTS

PFOA was present in 98 of 143 patients (68.5%) with medial knee OA. Quantile regression analysis revealed that coexisting PFOA was associated with the pain-related subcategory of the JKOM. Furthermore, multiple logistic regression analysis showed that coexisting PFOA was associated with higher odds of reporting knee pain on using stairs while ascending (odds ratio [OR] 4.81 [95% confidence interval (95% CI) 1.73, 14.3]) and descending (OR 3.86 [95% CI 1.44, 10.8]). A more varus knee alignment and lower knee flexion ROM, which are features of patients with coexisting PFOA, were associated with knee pain while ascending/descending stairs. However, patellar alignment, trochlear morphology, and patellar height were not significantly associated with knee pain.

CONCLUSION

PFOA coexisting with medial knee OA was associated with worse clinical symptoms, particularly while ascending/descending stairs, although patellar alignment did not contribute to reporting knee pain. Further studies that include evaluation of the PF joint are warranted to develop a basis for an optimal intervention based on compartmental involvement.

In vivo Kinematics of the Knee after a Posterior Cruciate-Substituting Total Knee Arthroplasty: A Comparison between Caucasian and South Korean Patients

Purpose

This study compared in vivo kinematic differences between Caucasian and South Korean patients after a posterior-substituting total knee arthroplasty (PS-TKA).

Materials and Methods

In vivo motions of 9 Caucasian and 13 South Korean knees with a PS-TKA during weight bearing single leg lunge were determined using a dual fluoroscopic imaging technique. Normalized tibiofemoral condylar motions and articular contact locations were analyzed.

Results

Femoral condylar motions of the two groups showed a similar trend in anteroposterior translation, but the South Korean patients were more anteriorly positioned than the Caucasian patients at low flexion and maximal flexion angles in both medial and lateral compartments (p<0.05). Mediolateral femoral condyle translations were similar between the two groups. For tibiofemoral articular contact kinematics, the South Korean patients had significantly more anterior contact locations at the medial compartment at low flexion angles, and more lateral contact locations at the lateral compartment at 0° and 90° flexion compared to the Caucasian patients (p<0.05). The South Korean patients had significantly larger distances between the medial and lateral contact locations at 60° and 90° flexion compared to the Caucasian patients (p<0.05).

Conclusions

The study revealed that while the Caucasian and South Korean knees had similar femoral condylar motions, after PS-TKA the South Korean patients showed different articular contact point kinematics compared to the Caucasian patients.

Anthropometry of Arabian Arthritic Knees: Comparison to Other Ethnic Groups and Implant Dimensions

BACKGROUND

We aim to measure the proximal tibia and distal femur of the osteoarthritic knees of Arab patients and to compare these measurements with data on other ethnic groups available in literature and with the dimensions of 6 knee implants.

METHODS

Anteroposterior and mediolateral measurements of tibia and femur were done on 3-dimensional computed tomography reconstructions of 124 osteoarthritic knees undergoing total knee arthroplasty with patient-specific instruments.

RESULTS

Average mediolateral and anteroposterior dimensions of the tibia for Arab knees were 74.36 ± 6 mm and 48.94 ± 4.57 mm, respectively, whereas for femur, 72.04 ± 6.6 and 68.1 ± 7.75, respectively. Average aspect ratio for tibial was 152.62 ± 12.66 and for femur 106.37 ± 14.34.

CONCLUSION

The size of Arab knees was generally smaller than Caucasian and larger than Asian. There is significant asymmetry of proximal tibial plateau and femur condyles.

Improving tibial component alignment in total knee arthroplasty

PURPOSE

Tibia torsion may influence the accuracy of extramedullary instrumentations in total knee arthroplasty (TKA). This study assessed whether the effect of tibial torsion may be overcome using a surgical technique in which the extramedullary rod is aligned to reference points at the proximal tibia only.

METHODS

A consecutive series of 94 knees that underwent TKA were analyzed. In the first 47 knees (group 1), a standard procedure for tibial component alignment was performed while in the second group of 47 knees, a modified surgical technique was used including the alignment of the extramedullary rod to the reference points at the proximal tibia only (group 2). Lower limb, femoral, and tibial component alignment were measured on postoperative long-leg radiographs.

RESULTS

Femorotibial mechanical axes angles were similar in the two groups. Femoral component alignment also did not differ between the groups. A neutral alignment of the tibial component was achieved in 17 and 34 % of the knees in group 1 and group 2, respectively (p = 0.04). A malalignment of the tibial component >3° was found in 34 % of knees in group 1 compared with 4 % of those in group 2 (p = 0.0001).

CONCLUSIONS

Coronal alignment of the tibial component may improve by setting the extramedullary rod in line with anatomical references in the proximal tibia only. This technique appears to bypass the influence of tibial torsion on the alignment of the extramedullary guide at the distal tibia. The clinical relevance of the study is that using this technique, the rate of malalignment of the tibial component may be reduced compared to a standard technique in which a fixed reference is used at the ankle joint.

Dynamic Knee Alignment and Collateral Knee Laxity and Its Variations in Normal Humans

Alignment of normal, arthritic, and replaced human knees is a much debated subject as is the collateral ligamentous laxity. Traditional quantitative values have been challenged. Methods used to measure these are also not without flaws. Authors review the recent literature and a novel method of measurement of these values has been included. This method includes use of computer navigation technique in clinic setting for assessment of the normal or affected knee before the surgery. Computer navigation has been known for achievement of alignment accuracy during knee surgery. Now its use in clinic setting has added to the inventory of measurement methods. Authors dispel the common myth of straight mechanical axis in normal knees and also look at quantification of amount of collateral knee laxity. Based on the scientific studies, it has been shown that the mean alignment is in varus in normal knees. It changes from lying non-weight-bearing position to standing weight-bearing position in both coronal and the sagittal planes. It also varies with gender and race. The collateral laxity is also different for males and females. Further studies are needed to define the ideal alignment and collateral laxity which the surgeon should aim for individual knees.

MRI-based analysis of patellofemoral cartilage contact, thickness, and alignment in extension, and during moderate and deep flexion

BACKGROUND

Several factors are believed to contribute to patellofemoral joint function throughout knee flexion including patellofemoral (PF) kinematics, contact, and bone morphology. However, data evaluating the PF joint in this highly flexed state have been limited. Therefore, the purpose of this study was to evaluate patellofemoral contact and alignment in low (0°), moderate (60°), and deep (140°) knee flexion, and then correlate these parameters to each other, as well as to femoral morphology.

METHODS

Sagittal magnetic resonance images were acquired on 14 healthy female adult knees (RSRB approved) using a 1.5 T scanner with the knee in full extension, mid-flexion, and deep flexion. The patellofemoral cartilage contact area, lateral contact displacement (LCD), cartilage thickness, and lateral patellar displacement (LPD) throughout flexion were defined. Intra- and inter-rater repeatability measures were determined. Correlations between patellofemoral contact parameters, alignment, and sulcus morphology were calculated.

RESULTS

Measurement repeatability ICCs ranged from 0.94 to 0.99. Patellofemoral cartilage contact area and thickness, LCD, and LPD were statistically different throughout all levels of flexion (p<0.001). The cartilage contact area was correlated to LPD, cartilage thickness, sulcus angle, and epicondylar width (r=0.47-0.72, p<0.05).

DISCUSSION

This study provides a comprehensive analysis of the patellofemoral joint throughout its range of motion.

CONCLUSIONS

This study agrees with past studies that investigated patellofemoral measures at a single flexion angle, and provides new insights into the relationship between patellofemoral contact and alignment at multiple flexion angles.

CLINICAL RELEVANCE

The study provides a detailed analysis of the patellofemoral joint in vivo, and demonstrates the feasibility of using standard clinical magnetic resonance imaging scanners to image the knee joint in deep flexion.

The dynamic nature of alignment and variations in normal knees

The restoration of knee alignment is an important goal during total knee arthroplasty (TKA). In the past surgeons aimed to restore neutral limb alignment during surgery. However, previous studies have demonstrated alignment to be dynamic, varying depending on the position of the limb and the degree of weight-bearing, and between patients. We used a validated computer navigation system to measure the femorotibial mechanical angle (FTMA) in 264 knees in 77 male and 55 female healthy volunteers aged 18 to 35 years (mean 26.2). We found the mean supine alignment to be a varus angle of 1.2° (standard deviation (sd) 4), with few patients having neutral alignment. FTMA differs significantly between males and females (with a mean varus of 1.7° (sd 4) and 0.4° (sd 3.9), respectively; p = 0.008). It changes significantly with posture, the knee hyperextending by a mean of 5.6°, and coronal plane alignment becoming more varus by 2.2° (sd 3.6) on standing compared with supine. Knee alignment is different in different individuals and is dynamic in nature, changing with different postures. This may have implications for the assessment of alignment in TKA, which is achieved in non-weight-bearing conditions and which may not represent the situation observed during weight-bearing.

Distal femoral condyle is more internally rotated to the patellar tendon at 90° of flexion in normal knees

Background

The configuration of the distal surface of the femur would be more important in terms of the patellofemoral (PF) joint contact because the patella generally contacts with the distal surface of the femur in knee flexion. Some total knee arthroplasty (TKA) designs configurate medially prominent asymmetric femoral condyles. This difference in the design of distal femoral condyle may affect the PF joint congruity in knee flexion. Furthermore, some surgeons advocate a concept aligning the symmetric components parallel to the native joint inclination, not perpendicular to the mechanical axis. This concept would also make a difference on the PF joint congruity at the distal femur in knee flexion. However, no fundamental study has been reported on the PF congruity at the distal femur to discuss the theoretical priority of these concepts.

The current study investigated the angular relationship between the tibial attachment of the patellar tendon and the distal surface of the femur at 90° of flexion in normal knees.

Methods

The open magnetic resonance images of 45 normal knees at 90° of flexion were used to measure the angles between the tibial attachment of the patellar tendon, the equatorial line of the patella, and the distal surface of femoral condyles.

Results

The distal surface of femoral condyles was internally rotated relative to the tibial attachment of the patellar tendon and the equatorial line of the patella in all the knees (8.2° ± 3.5° and 5.8° ± 2.5°, respectively), not parallel.

Conclusions

Distal femoral condyle is internally rotated to the patellar tendon at 90° of flexion in normal knees. When the symmetric femoral component is aligned perpendicular to the femoral mechanical axis, the patellar tendon would be possibly more twisted than the condition in normal knees, and the deviation of the PF contact force on the patellar component might be caused. The configuration and alignment of the distal condyle of the femoral component can affect the PF joint congruity in knee flexion. In this respect, our results provide important information in considering designs and alignment in the distal femur of TKA and the PF joint congruity in knee flexion.

Collateral ligament laxity in knees: what is normal?

BACKGROUND

Proper alignment and balancing of soft tissues of the knee are important goals for TKA. Despite standardized techniques, there is no consensus regarding the optimum amount of collateral ligament laxity one should leave at the end of the TKA.

QUESTIONS/PURPOSES

I asked (1) what is the collateral laxity in young healthy volunteers, and (2) is there a difference in collateral laxity between males and females.

METHODS

The femorotibial mechanical angle (FTMA) was measured in 314 knees in healthy volunteers aged 19 to 35 years. Subjects with a history of pain, malalignment, dysplasia, or trauma were excluded. Twenty-five knees were excluded because the hip center could not be acquired, and 22 were excluded because of a history of pain and trauma, leaving 267 knees for inclusion in the study. Of these, 155 were from men and 112 were from women. A validated method using a computer navigation system was used to obtain the measurements. A 10-Nm torque was used to stress the knee in varus and valgus at 0° extension and 15° flexion. An independent t-test and ANOVA were applied to the data to calculate any significant difference between groups (p<0.05).

RESULTS

The mean (SD) unstressed supine FTMA was varus of 1.2° (SD, 4°) in 0° extension and varus of 1.2° (SD, 4.4°) in 15° flexion (p=0.88). On varus torque of 10 Nm, the supine FTMA changed by a mean of 3.1° (SD, 2°) (95% CI, 2.4°-3.8°; p<0.001) in 0° extension and 6.9° (SD, 2.6°) (95% CI, 6.2°-7.7°; p<0.001) in 15° flexion. On valgus torque of 10 Nm, the FTMA changed by a mean of 4.6° (SD, 2.2°) (95% CI, 3.9°-5.3°; p<0.001) in 0° extension and 7.9° (SD, 3.4°) (95% CI, 7.1°-8.7°; p<0.001) in 15° flexion. The mean unstressed FTMA in 0° extension was varus of 1.7° (SD, 4°) in men and 0.4° (SD, 3.9°) in women (p=0.01). Differences in collateral ligament laxity were seen between men and women (p<0.001 for valgus torque and 0.035 for varus torque in 15° flexion). With valgus torque at 0° flexion, the supine FTMA change was valgus of 4.2° (SD, 2.0°) for men and 5.0° (SD, 2.4°) for women, while at 15° flexion the FTMA change was valgus 7.6° (SD, 3.6°) for men and 8.3° (SD, 3.2°) for women With varus torque at 0° flexion, additional varus was -3.0° (SD, 1.8°) for men and -3.3° (SD, 2.2°) for women, while at 15° flexion, varus was -7.0° SD, (2.5°) for men and -6.9° (SD, 2.8°) for women.

CONCLUSIONS

The collateral laxity in young healthy volunteers was quantified in this study. The collateral ligament laxity is variable in different persons. In addition, ligaments in women are more lax than in men in valgus stress.

CLINICAL RELEVANCE

This study was conducted on young, healthy knees. Whether the findings are applicable to arthritic knees and replaced knees needs additional evaluation. However the findings provide a baseline from which to work in the evaluation of arthritic knees and in the case of TKA.

The dorsal pedis artery as a new distal landmark for extramedullary tibial alignment in total knee arthroplasty

PURPOSE

It is better to use multiple anatomical landmarks to reduce errors in component alignment in total knee arthroplasty. Therefore, it is worthwhile to find a new landmark that can be used as an addition to conventional ones. Herein, we assessed the dorsal pedis artery as a new distal landmark for extramedullary tibial alignment.

METHODS

Fifty-two ankles in patients undergoing total knee arthroplasty and 10 ankles in normal controls were included. Color Doppler ultrasonography was used to locate the dorsal pedis artery at the level of the ankle joint. Conventional landmarks, including the tibialis anterior tendon, the extensor hallucis longus tendon, the extensor digitorum longus tendon, and the malleolar centre, were also located on ultrasound images. The distances between the ankle centre and each landmark were measured and compared.

RESULTS

The dorsal pedis artery was absent in 2 patients and impalpable but visible with ultrasonography in other 2 patients. The dorsal pedis artery was located anatomically closest to the ankle centre in patients (0.4 ± 3.4 mm lateral). Statistical analysis showed that the dorsal pedis artery, the extensor hallucis longus tendon, and the malleolar centre were located significantly closer to the ankle centre comparing with the extensor digitorum longus tendon and the tibialis anterior tendon in both patients and controls (p < 0.001).

CONCLUSIONS

As long as the dorsal pedis artery exists, it can be used as an addition to the conventional landmarks in total knee arthroplasty. Using this new landmark will help reduce errors in coronal plane alignment of tibial component.

LEVEL OF EVIDENCE

II.

The use of contralateral knee magnetic resonance imaging to predict meniscal size during meniscal allograft transplantation

PURPOSE

The purpose of this study was to determine the size of each meniscus and compare it with the contralateral limb using conventional knee magnetic resonance imaging (MRI) taken from previously uninjured, healthy, young volunteers.

METHODS

The knee joints of 60 healthy volunteers (aged 21 to 43 years, 30 men and 30 women) were enrolled in this study. Standard 3.0-T MRI in a controlled setting was used. By use of the mid-coronal images, the height and width of each medial and lateral meniscus were measured. By use of the mid-sagittal images, the height and width of the anterior and posterior horns of each meniscus was measured. The whole length spanning from the most anterior margin to the most posterior margin of each meniscus was also measured. Mean, standard deviation, and 95% confidence interval values were determined for each measurement.

RESULTS

There were 3 incomplete discoid lateral menisci (10%) in men and 2 incomplete discoid menisci (6.7%) in women. The study group with non-discoid knees comprised 27 men and 28 women. The power of this study ranged from 0.57 to 0.66. All values showed good reliability (intraclass correlation coefficient range, 0.887 to 0.974). There were no significant differences between right and left menisci (all P > .05). There were significant differences between genders. All parameters showed significant differences (P < .05) except the medial meniscus width (P = .221).

CONCLUSIONS

In this small subset of patients, there were no differences between right and left meniscal measurements according to MRI. Therefore, when one is performing meniscal allograft transplantation, contralateral knee MRI may be useful to determine the required size. Identifying both the overall width and length of each meniscus is important when preparing an allograft.

CLINICAL RELEVANCE

Contralateral knee MRI may be used for more accurate meniscal size measurement in patients undergoing meniscal allograft transplantation.

Medium-term (5-year) comparison of the functional outcomes of combined anterior cruciate ligament and posterolateral corner reconstruction compared with isolated anterior cruciate ligament reconstruction

PURPOSE

To present a 5-year comparison of the functional outcomes of combined anterior cruciate ligament (ACL) and posterolateral corner (PLC) reconstruction with those of isolated ACL reconstruction.

METHODS

All patients were reviewed clinically and completed knee function questionnaires prospectively, by use of the International Knee Documentation Committee (IKDC) 2000, Knee Injury and Osteoarthritis Outcome Score (KOOS), and Lysholm scoring systems, preoperatively and at 1, 2, and 5 years postoperatively. Patients who underwent combined ACL-PLC reconstruction were identified and reviewed. These patients had intact lateral collateral ligaments. A comparison group was created from a group of patients who underwent isolated ACL reconstruction. The ACL group was selected to have the same profile with regard to age, sex, and meniscal procedure.

RESULTS

There were 25 patients in the ACL-PLC group and 100 in the ACL group. All patients underwent restoration of their PLC function as shown on dial testing. The preoperative values for all KOOS measures and the Lysholm score were significantly lower in the ACL-PLC group than in the ACL group (P < .001). The IKDC score was not significantly different. All knee scores showed a significant improvement in both groups postoperatively at 1, 2, and 5 years (P < .001). At 5 years, the KOOS symptoms subscore (P < .001), KOOS pain subscore (P < .001), KOOS sports subscore (P < .001), KOOS quality-of-life subscore (P < .05), KOOS activities-of-daily living subscore (P < .001), aggregate score for all KOOS parameters (P < .001), and Lysholm score (P < .001) were significantly lower in the ACL-PLC group than in the ACL group. At 5 years, the IKDC scores were not significantly different. All patients in the ACL-PLC group resumed preinjury employment, and 23 of 25 had resumed sports.

CONCLUSIONS

Combined ACL-PLC injuries have greater morbidity than isolated ACL injuries. However, return to work and sporting activity is possible in most cases after combined ACL-PLC reconstruction. The KOOS for sport outcomes suggests that sports were resumed at lower functional levels.

LEVEL OF EVIDENCE

Level III, case-control study.

Medial sixth of the patellar tendon at the tibial attachment is useful for the anterior reference in rotational alignment of the tibial component

PURPOSE

The anteroposterior (AP) axis connecting the middle of the posterior cruciate ligament to the medial border of the patellar tendon at its attachment has been introduced as a reproducible and reliable reference perpendicular to the surgical epicondylar axis in healthy knees. A recent literature has reported that the AP axis of the tibia is, on average, almost perpendicular to the surgical epicondylar axis also in varus and valgus knees and can be used as a tibial rotational reference to minimize the risk for rotational mismatch between the femoral and tibial components in total knee arthroplasty (TKA). However, it is difficult to identify the AP axis after tibial resection. The purpose of the current study was to determine a modified AP axis that runs parallel to the AP axis and passes through the centre of the cut surface in osteoarthritic knees.

METHODS

Preoperative computed tomography scans on 30 varus and 30 valgus knees undergoing TKA were studied using a three-dimensional software. The modified AP axis that runs parallel to the AP axis and passes through the centre of the cut surface was drawn. We investigated where the modified AP axis crossed the patellar tendon at its tibial attachment.

RESULTS

The modified AP axis passed through the medial 1/6 of the patellar tendon (4 mm from medial edge) at its attachment in both varus and valgus knees.

CONCLUSIONS

The AP axis of the tibia is useful as a tibial rotational reference in cutting the proximal tibia, but it is difficult to identify the AP axis after tibial resection. The clinical relevance of this study is that medial 1/6 of the patellar tendon at its attachment would be a useful landmark in aligning the tibial component.

LEVEL OF EVIDENCE

IV.

Knee laxity of Malaysian adults: gender differentials, and association with age and anthropometric measures

BACKGROUND

Knee laxity measurements have been shown to be associated with some medical conditions such as chronic joint pain and collagen tissue diseases. The aim of this study was to determine the effects of demographic factors and anthropometric measures on knee laxity.

MATERIALS AND METHODS

Data were collected from 521 visitors, staffs and students from the University Malaya Medical Centre and University of Malaya between December 2009 and May 2010. Knee laxity was measured using a KT-1000 arthrometer. Multiple regression analysis was used to find the association of knee laxity with age and anthropometric measures.

RESULTS

Using ANOVA, knee laxity did not show significant differences among ethnic groups for both genders. The average knee laxity in men was 3.47 mm (right) and 3.49 mm (left); while in women were 3.90 mm (right) and 3.67 mm (left). Knee laxity in women was significantly higher (right knee p<0.01 and left knee p<0.05) than men. Right knee laxity of men was negatively associated with height (p<0.05) and BMI (p<0.05); also a negative association was observed between left knee laxity and BMI (p<0.05). Overweight and obese men had less knee laxity than normal weight and underweight individuals. Elderly men and women (age 55 and above) had lower knee laxity (p<0.01) than young adults (ages 21-39).

CONCLUSION

These results suggest that age and body size are important factors in predicting knee laxity.

Accuracy of a proximal tibial cutting method using the anterior tibial border in TKA

PURPOSE

In conventional total knee arthroplasty (TKA) using extramedullary alignment guides, it is not always easy to cut the proximal tibia precisely perpendicular to the tibial axis. The purpose of this study was to compare the radiographic accuracy of cutting the proximal tibia between the use of the bony landmarks of the anterior tibial border and the use of the conventional technique.

METHODS

A total of 173 patients underwent primary TKA. In 76 TKAs, we used the bony landmark method, and in 97 TKAs, we used the conventional method. In the bony landmark method, we set the coronal alignment in reference to the line connecting the proximal and distal one-third of the anterior tibial border, and we determined the 5° posterior slope in reference to this line. Six months postoperatively, radiological evaluations were performed using full-length standing anteroposterior and lateral radiographs of the knee.

RESULTS

No significant differences in the coronal tibial component angle were found between the groups. The posterior tilt of the tibial component was significantly smaller in the bony landmark method than in the conventional method (5.1° ± 2.9° vs. 6.4° ± 3.2°, respectively; p = 0.007). The percentage of patients whose posterior tilt of the tibial component was within ±3° of 5° was significantly larger in the bony landmark method than in the conventional method (70 vs. 62%, respectively; p = 0.04).

CONCLUSIONS

The bony landmark method provided a more accurate posterior tibial slope than the conventional method. However, there was no difference in coronal alignment compared with the conventional method.

Relationship between knee alignment and radiographic markers of osteoarthritis: a cross-sectional study from a Korean population

AIM

The purpose of this paper was to investigate the relationship between static varus knee alignment and the radiographic markers of knee osteoarthritis (OA), including joint space narrowing (JSN) and Kellgren-Lawrence (K-L) grading scale.

METHOD

Knee alignment was measured by mechanical axis from weight-bearing anteroposterior (AP) radiographs of 251 symptomatic knees with radiological signs of OA (K-L grade ≥ 1). Linear correlation between knee varus alignment and variables, including joint space width (JSW) and K-L grades of tibiofemoral (TF) joint in extension or 45° flexion and patellofemoral (PF) joints were investigated. Multiple linear regression analyses were also performed to examine independent associations between varus knee alignment and JSW. Analysis of covariance (ancova) was performed to analyze the difference in knee alignment among K-L grade category groups adjusted for physical variables.

RESULTS

Varus knee alignment was negatively correlated with JSW of medial TF joint in extension AP (r = -0.460, P = 0.0001) and 45° flexion PA views (r = -0.476, P = 0.0001) and PF JSN (r = -0.168, P = 0.008). Multiple linear regression analysis adjusted for physical variables showed that the varus knee alignment was negatively associated with the JSW of medial TF joint in extension AP (P = 0.0001) and 45° flexion PA view (P = 0.0001). ancova adjusted for physical variables showed that knees in K-L grade 4 had significantly greater varus alignment than those in K-L grades 1-3 in AP (P = 0.0001), 45° flexion PA view (P = 0.0001), and PF joint (P = 0.0001~0.001).

CONCLUSION

Varus knee alignment is associated with the radiographic measures of knee OA severity.

A novel and reproducible reference axis for distal tibial axial rotation

We hypothesized that the tibial plafond revealed a novel anatomical reference axis associated with the axial alignment through an image processing technique. The plafond axis (PLA) was defined as the line connecting the midpoints of the medial and lateral plafond margin. In terms of intraclass correlation coefficient, the reproducibility to identify the PLA was not less than that to identify a conventional trans-malleolar axis (TMA). When the proximal medial-lateral axis was applied, the tibial torsion with reference to the PLA and the TMA was 12.0° ± 8.4°, and 23.3° ± 8.6°, respectively. The PLA can be considered a reproducible reference and is expected to be applicable in preoperative planning as well as postoperative evaluation of the implant alignment in total knee arthroplasty.

Tibia vara affects the aspect ratio of tibial resected surface in female Japanese patients undergoing TKA

BACKGROUND

Tibia vara seen in Japanese patients reportedly influences the tibial component alignment when performing TKA. However, it is unclear whether tibia vara affects the component position and size selection.

QUESTIONS/PURPOSES

We therefore determined (1) the amount of medial tibial bow, (2) whether the tibia vara influences the aspect ratio of the tibial resected surface in aligning the tibial component with the tibial shaft axis, and (3) whether currently available tibial components fit the shapes of resected proximal tibias in terms of aspect ratio.

METHODS

We measured the tibia vara angle (TVA), proximal varus angle (PVA), and the mediolateral and middle AP dimensions of the resected surface using three-dimensional preoperative planning software in 90 knees of 74 female patients with varus osteoarthritis. We determined the correlations of the aspect ratio with TVA or PVA and compared the aspect ratios to those of five prosthesis designs.

RESULTS

The mean TVA and PVA were 0.6° and 2.0°, respectively. The aspect ratio negatively correlated with both TVA and PVA (r = -0.53 and -0.55, respectively). The mean aspect ratio of the resected surface was 1.48 but gradually decreased with increasing AP dimension, whereas four of the five prostheses had a constant aspect ratio.

CONCLUSIONS

The aspect ratio of resected tibial surface was inversely correlated to the degree of tibia vara, and currently available prosthesis designs do not fit well to the resected surface in terms of aspect ratio.

CLINICAL RELEVANCE

The design of a tibial component with a smaller aspect ratio could be developed to obtain better bone coverage in Japanese patients.

Mechanical contributors to sex differences in idiopathic knee osteoarthritis

The occurrence of knee osteoarthritis (OA) increases with age and is more common in women compared with men, especially after the age of 50 years. Recent work suggests that contact stress in the knee cartilage is a significant predictor of the risk for developing knee OA. Significant gaps in knowledge remain, however, as to how changes in musculoskeletal traits disturb the normal mechanical environment of the knee and contribute to sex differences in the initiation and progression of idiopathic knee OA. To illustrate this knowledge deficit, we summarize what is known about the influence of limb alignment, muscle function, and obesity on sex differences in knee OA. Observational data suggest that limb alignment can predict the development of radiographic signs of knee OA, potentially due to increased stresses and strains within the joint. However, these data do not indicate how limb alignment could contribute to sex differences in either the development or worsening of knee OA. Similarly, the strength of the knee extensor muscles is compromised in women who develop radiographic and symptomatic signs of knee OA, but the extent to which the decline in muscle function precedes the development of the disease is uncertain. Even less is known about how changes in muscle function might contribute to the worsening of knee OA. Conversely, obesity is a stronger predictor of developing knee OA symptoms in women than in men. The influence of obesity on developing knee OA symptoms is not associated with deviation in limb alignment, but BMI predicts the worsening of the symptoms only in individuals with neutral and valgus (knock-kneed) knees. It is more likely, however, that obesity modulates OA through a combination of systemic effects, particularly an increase in inflammatory cytokines, and mechanical factors within the joint. The absence of strong associations of these surrogate measures of the mechanical environment in the knee joint with sex differences in the development and progression of knee OA suggests that a more multifactorial and integrative approach in the study of this disease is needed. We identify gaps in knowledge related to mechanical influences on the sex differences in knee OA.

Estimation of frontal alignment error of the extramedullary tibial guide on the bi-malleolar technique: a simulation study with magnetic resonance imaging

PURPOSE

The bi-malleolar technique for the extramedullary tibial guide is a representative method for determining the ankle center in total knee arthroplasty (TKA). The purpose of this study is to estimate three-dimensionally the lateral errors (difference between the real ankle center and the bi-malleolar center) and the varus angular errors of this technique under the condition that the malleolar prominences were correctly identified.

METHODS

Magnetic resonance images of 51 lower limbs from 51 healthy volunteers were analyzed. The lateral errors were measured, including or excluding the subcutaneous thickness, along the line perpendicular to the transmalleolar axis (TMA) or along the tibial anteroposterior (AP) axis. Furthermore, we evaluated the effects of the tibial torsion and the difference between the subcutaneous thicknesses on the malleoli on the lateral error.

RESULTS

When including the skin, the mean lateral errors of the ankle center observed along the line perpendicular to the TMA and along the tibial AP axis were 3.7 ± 1.4mm and 1.2 ± 1.5mm, respectively. The mean angular errors were 0.6 ± 0.2° and 0.2 ± 0.3°, respectively. A significant correlation between the tibial torsion and the lateral error was noted when observed along the tibial AP axis. The difference between the subcutaneous thicknesses on the malleoli affected the lateral error.

CONCLUSION

The errors were small enough to determine the mechanical axis of the tibia if the tibial guide could catch the bi-malleolar prominences of the ankle accurately and align along the tibial AP axis.

Relationship between the tibial anteroposterior axis and the surgical epicondylar axis in varus and valgus knees

PURPOSE

Proper rotational alignment in total knee arthroplasty (TKA) is essential for successful outcomes. The surgical epicondylar axis (SEA) has been frequently used to determine the femoral rotational alignment, and the anteroposterior (AP) axis of the tibia described in previous study has been introduced as a line perpendicular to the SEA in healthy knees. However, the rotational relationship between the distal femur and the proximal tibia would vary between normal and osteoarthritic knees, and a question remains whether the rotational relationship between the SEA and the AP axis of the tibia would be the same between normal and osteoarthritic knees. This study aims to determine whether the AP axis of the tibia is actually perpendicular to the SEA and useful for the tibial rotational alignment also in osteoarthritic knees.

METHODS

Preoperative computed tomography scans on 25 varus and 25 valgus knees undergoing TKA were studied. The SEA and the AP axis of the tibia were identified using a three-dimensional software, and the angle between the line perpendicular to the projected SEA and the AP axis was measured.

RESULTS

The AP axis of the tibia was 1.7° ± 4.3° and 2.0° ± 4.0° internally rotated relative to the line perpendicular to the SEA in the varus and valgus groups, respectively.

CONCLUSIONS

The AP axis of the tibia was, on average, perpendicular to the SEA in both varus and valgus knees. The AP axis would be useful for setting the tibial component with minimal rotational mismatch.

LEVEL OF EVIDENCE

IV.

Is the medial wall of the intercondylar notch useful for tibial rotational reference in unicompartmental knee arthroplasty?

BACKGROUND

It is difficult to implant components in the correct rotational position in the narrow operating field in a unicompartmental knee arthroplasty. Although no rotational reference has been confirmed for unicompartmental knee arthroplasty, the AP axis of the tibia may serve as a reference for unicompartmental knee arthroplasty and TKA. However, it is difficult to identify the AP axis during unicompartmental knee arthroplasty, especially with the tibia first-cut technique.

QUESTIONS/PURPOSES

We explored whether the medial wall of the intercondylar notch could be useful for the tibial rotational reference as an alternative to the AP axis in unicompartmental knee arthroplasty.

METHODS

We scanned the knees of 24 healthy Asian patients (45 knees) at a flexion angle of 90º using open MRI, then measured the angle between the AP axis and the medial wall of the notch. We determined whether the origins of the ACL and PCL were located lateral to the line on the medial wall of the notch and whether the mediolateral dimension of the bone cut surface of the medial tibial plateau was wide enough relative to the AP dimension to use the commercially available unicompartmental knee arthroplasty tibial components when the tibia was cut parallel to the medial wall of the notch.

RESULTS

At 90º flexion the medial wall of the notch was externally rotated 0.1º ± 4.4º relative to the AP axis. In all knees, the ACL and PCL were located lateral to the line on the medial wall of the notch. The mediolateral dimension of the bone cut surface was wide enough to use the commercially available tibial components.

CONCLUSIONS

At 90º flexion the medial wall of the intercondylar notch is almost parallel to the AP axis of the tibia at and we believe a reasonable candidate for a rotational reference of tibial placement in unicompartmental knee arthroplasty. This landmark would need to be confirmed in other populations and in patients with osteoarthritis.

Three-dimensional morphology of the knee reveals ethnic differences

BACKGROUND

Studies have demonstrated sex differences in femoral shape and quadriceps angle raising a question of whether implant design should be sex-specific. Much of this research has addressed shape differences within the Caucasian population and little is known about differences among ethnic groups.

QUESTIONS/PURPOSES

We therefore asked: Do shape differences in the distal femur and proximal tibia exist among different ethnic groups and between the sexes in each ethnic population? And if ethnic differences exist, do they have a clinical impact on current TKA design?

SUBJECTS AND METHODS

We analyzed 1000 normal adult knees (80 African American, 80 East Asian, and 860 Caucasian). Three-dimensional surface models were created for each bone and added to three-dimensional statistical bone atlases. Statistical shape analysis was conducted with a process combining principal components and multiple discriminate analyses. Eleven femoral and nine tibial measurements were calculated.

RESULTS

We found differences in mean measurements between the sexes and ethnicities. Males had larger knees, with a mean 5-mm-larger anteroposterior dimension than females in all ethnicities. African American females had a 7.4-mm-deeper patellar groove, 2.3-mm-smaller tibial mediolateral dimension, and 2.5-mm-larger tibial anteroposterior dimension than Caucasian females. African American males had a 4.3-mm-larger femoral anteroposterior dimension, 10.1-mm-larger tibial mediolateral dimension, and 6-mm-larger tibial anteroposterior dimension than Asian males.

CONCLUSIONS

We identified differences in three-dimensional knee morphology among Caucasian, African American, and East Asian populations. Clinical studies will be required to determine whether these differences are important for implant design.

Lower limb alignment in anterior cruciate ligament-deficient versus -intact knees

PURPOSE

To compare anatomic lower limb features of anterior cruciate ligament (ACL)-deficient versus -intact knees in Chinese subjects.

METHODS

Anatomic lower limb features (mechanical axis, tibiofemoral angle, posterior tibial slope, notch width index, and hip neck-shaft angle) of 25 men and 3 women aged 18 to 39 (mean, 26) years with ACL-deficient knees, and 16 men and 4 women aged 24 to 31 (mean, 28) years with ACL-intact knees were compared using radiography.

RESULTS

The notch width index (0.26 vs. 0.29, p=0.02) was significantly smaller in ACL-deficient than ACL-intact knees.

CONCLUSION

Small notch width was associated with a thin ACL and can be regarded as an anatomic intrinsic risk factor for ACL injuries.

Importance of independent measurement of width and length of lateral meniscus during preoperative sizing for meniscal allograft transplantation

BACKGROUND

Successful meniscus transplantation depends on an accurate sizing of the meniscal allograft. Although accurate sizing of the meniscal allograft is crucial during meniscus transplantation, the accuracy of meniscal measurement methods is still in debate.

PURPOSE

This study was undertaken to evaluate the relationship between the width and length of the lateral meniscus. These anatomic dimensions were also evaluated in the context of the patient's height, weight, gender, and body mass index (BMI).

STUDY DESIGN

Descriptive laboratory study.

METHODS

Ninety-one samples of fresh lateral meniscus were obtained during total knee arthroplasty. The samples were obtained carefully without injuring the meniscus itself and the bony attachment sites. For each lateral meniscus, the anatomic dimensions (width [LMW] and length [LML]) were recorded. The height, weight, gender, and BMI of the patients were also recorded. The Pearson correlation and multivariate and linear regression analysis were applied for each variable. The accuracy was defined as those measures that fell within 10% of the original size. A P value ≤ .05 was considered significant.

RESULTS

The mean LMW was 30.7 mm (standard deviation [SD] = 3.5) and 27.0 mm (SD = 2.6) for men and women, respectively. The mean LML was 33.7 mm (SD = 4.3) and 30.8 mm (SD = 2.6) for men and women, respectively. Thirty-nine samples (42.5%) showed LMW measurements within a 10% difference of LML, whereas 50 samples (55%) showed an LMW greater than a 10% difference of LML. Although there were correlations between LML with LMW in men and correlations between weight and LMW with LML in women, the accuracy for the derived linear regression formulas was 3%, 9%, and 12%, respectively.

CONCLUSION

The length cannot be predicted accurately from the width of the lateral meniscus. The height, weight, gender, and BMI failed to estimate the dimensions of the lateral meniscus. Therefore, it is essential to measure the width and length separately and match it with the allograft with other size measuring methods.

CLINICAL RELEVANCE

This study emphasizes the importance of measuring the width and length of the lateral meniscus independently during preoperative sizing for a meniscal allograft transplantation procedure. The height, weight, gender, and body mass index may not be reliable parameters for estimating the size of the meniscus.

Anterior border of the tibia as a landmark for extramedullary alignment guide in total knee arthroplasty for varus knees

A disadvantage to using extramedullary alignment guides of the tibia for total knee arthroplasty (TKA) is difficulty in correctly identifying the ankle center. The anterior border of the tibia is easily palpable, as it is not covered by muscles and its shape is convex anteriorly. We hypothesized that appropriate points exist along the anterior border that can be used as landmarks for extramedullary guides. Prior to TKA, computed tomographic images of the entire tibia were obtained from 101 osteoarthritic knees with varus deformities. The relationship between the lines connecting two points on the anterior border and the mechanical axis was evaluated using 3D imaging software. The mean angles between each of 10 determined axes and the mechanical axis varied from 3.2° varus to 2.1° valgus in the coronal plane. In the sagittal plane, all axes referencing the anterior border of the tibia showed anterior inclination to the mechanical axis. The line connecting the medial one-third of the patellar tendon attachment and the distal one-fourth of the anterior border, however, was highly consistent and parallel to the mechanical axis in the coronal plane. This axis can be effectively used as a landmark for extramedullary guides during TKA.

Comparison of five patellar height measurement methods in 90° knee flexion

PURPOSE

The aim of this prospective study was to evaluate the patellar height in 90° knee flexion.

METHODS

A total of 85 patients with 95 knee joints were included in the study. Patellar height was measured according to the Blackburne-Peel, Labelle-Laurin, Insall-Salvati, Linclau, and Caton-Deschamps methods in the whole group and in subgroups based on age, gender, and side.

RESULTS

The BP-ratio showed a patella norma in 45 cases, and in 25 cases a patella alta and infera, respectively. The Labelle-Laurin method determined a patella norma in eight knees, in 35 a patella alta and in 52 a patella infera. The IS-ratio revealed a patella norma in 52 patients, a patella alta in six and in 37 a patella infera. The Linclau method demonstrated in 52 cases a patella norma, in 17 a patella alta and in 26 a patella infera. The CD-ratio showed the highest values of a patella norma among all tested methods in 67 knees, whereas a patella alta was evident in 13 and a patella infera in 15 cases. In the subgroups, discrepancies depended on the subgroup and method used.

CONCLUSIONS

Our results demonstrate a method-dependent discrepancy in the measurement of patellar height. A future study should evaluate this effect in a direct comparison between 30° and 90° knee flexion.

In vivo normal knee kinematics: is ethnicity or gender an influencing factor?

BACKGROUND

In vivo studies have suggested Caucasians achieve lower average knee flexion than non-Western populations. Some previous studies have also suggested gender may influence condylar AP translation and axial rotation, while others report an absence of such an influence.

QUESTIONS/PURPOSES

We determined whether different ethnic and gender groups residing in the United States had different knee translations and rotations.

METHODS

Three-dimensional knee rotations and translations were determined for 72 healthy subjects (24 Caucasian men, 24 Caucasian women, 13 Japanese men, 11 Japanese women) from full extension to maximum flexion using a fluoroscopic technique, under in vivo, weightbearing conditions.

RESULTS

Although we observed substantial variability in all groups, small differences between groups were found, especially in deep flexion. Japanese women and men and Caucasian women achieved higher maximum flexion (153°, 151°, and 152°, respectively) than Caucasian men (146°). External rotation was higher for these three groups than for Caucasian men. The medial condyle remained more anterior for Caucasian women and all Japanese subjects than for Caucasian men, possibly leading to greater axial rotation and flexion, observed for these three groups.

CONCLUSION

We identified small differences in maximum flexion between genders and ethnic groups. While no differences were identified in the lateral condyle translation, the medial condyle remained more stationary and more anterior for the groups that achieved highest (and similar) maximum flexion. Therefore, it may be important for future implant designs to incorporate these characteristics, such that only the lateral condyle experiences greater posterior femoral rollback, while the medial condyle remains more stationary throughout flexion.

Posterior displacement of the tibia increases in deep flexion of the knee

BACKGROUND

Deep knee flexion is important to proper function for some activities and in some cultures, although there are large posterior forces during high knee flexion. Most of what we know about posterior restraint and stability, however, has not been determined from deep flexion and without distinguishing motion in the medial and lateral compartments.

QUESTIONS/PURPOSES

We therefore evaluated (1) the difference in posterior displacement between the medial and lateral compartments at a commonly used flexion angle of 90 degrees ; (2) that of deeply flexed knees at 135 degrees ; and (3) the difference in kinematics in the medial and lateral compartments. We analyzed posterior stability in 21 normal knees using interventional open magnetic resonance imaging (MRI) system.

RESULTS

When manual posterior stress was applied, the posterior displacements of the tibia were 0.6 mm/2.1 mm (medial/lateral) at 90 degrees and 0.6 mm/3.6 mm at 135 degrees . The posterior aspect of the femoral medial condyle moved 7.5 mm anteriorly with knee flexion, whereas the lateral condyle moved 1.3 mm anteriorly. The contact point of the lateral compartment moved 9.2 mm posteriorly with knee flexion, whereas the contact point of the medial compartment moved 2.3 mm anteriorly.

CONCLUSIONS

Posterior displacement was larger in the lateral compartment at both flexion angles with manual posterior stress. As the knees flexed from 90 degrees to 135 degrees , posterior displacement became larger in the lateral compartment.

CLINICAL RELEVANCE

Cruciate-retaining total knee arthroplasty (TKA) or posterior cruciate ligament (PCL) reconstruction surgery should aim to achieve stability on the medial side and a few millimeters of laxity at the lateral side at 90 degrees flexion with increasing laxity only on the lateral side in deep flexion.