The use of rheology to elucidate the granulation mechanisms of a miscible and immiscible system during continuous twin-screw melt granulation

Twin-screw hot melt granulation (TS HMG) is a valuable, but still unexplored alternative to granulate temperature and moisture sensitive drugs in a continuous way. Recently, the material behavior of an immiscible drug-binder blend during TS HMG was unraveled by using a rheometer and differential scanning calorimetry (DSC). Additionally, vibrational spectroscopic techniques proved the link between TS HMG and rheology since equal interactions at molecular level did occur in both processes. This allowed to use a rheometer to gain knowledge of the material behavior during hot melt processing of an immiscible drug-binder blend. However, miscibility of a drug-binder formulation and drug-binder interactions appear to influence the rheological properties and, hence conceivably also the granulation mechanism. The aim of this research was to examine if the TS HMG process of a miscible formulation system is comparable with the mechanism of an immiscible system and to evaluate whether rheology still serves as a useful tool to understand and optimize the hot melt granulation (HMG) process. The executed research (thermal analysis, rheological parameters and spectroscopic data) demonstrated the occurrence of a high and broad tan(δ) curve without a loss peak during the rheological temperature ramp which implies a higher material deformability without movement of the softened single polymer chains. Spectroscopic analysis revealed drug-polymer interactions which constrain the polymer to flow independently. As a result, the binder distribution step, which generally follows the immersion step, was hindered. This insight assisted the understanding of the granule properties. Inhomogeneous granules were produced due to large initial nuclei or adhesion of multiple smaller nuclei. Consequently, a higher granulation temperature was required in order to get the binder more homogeneously distributed within the granules.

The use of Rheology Combined with Differential Scanning Calorimetry to Elucidate the Granulation Mechanism of an Immiscible Formulation During Continuous Twin-Screw Melt Granulation

PURPOSE

Twin screw hot melt granulation (TS HMG) is a valuable, but still unexplored alternative to continuous granulation of moisture sensitive drugs. However, knowledge of the material behavior during TS HMG is crucial to optimize the formulation, process and resulting granule properties. The aim of this study was to evaluate the agglomeration mechanism during TS HMG using a rheometer in combination with differential scanning calorimetry (DSC).

METHODS

An immiscible drug-binder formulation (caffeine-Soluplus(®)) was granulated via TS HMG in combination with thermal and rheological analysis (conventional and Rheoscope), granule characterization and Near Infrared chemical imaging (NIR-CI).

RESULTS

A thin binder layer with restricted mobility was formed on the surface of the drug particles during granulation and is covered by a second layer with improved mobility when the Soluplus(®) concentration exceeded 15% (w/w). The formation of this second layer was facilitated at elevated granulation temperatures and resulted in smaller and more spherical granules.

CONCLUSION

The combination of thermal and rheological analysis and NIR-CI images was advantageous to develop in-depth understanding of the agglomeration mechanism during continuous TS HMG and provided insight in the granule properties as function of process temperature and binder concentration.

Vibrational spectroscopy to support the link between rheology and continuous twin-screw melt granulation on molecular level: A case study

Twin screw hot melt granulation (TSHMG) is an innovative and continuous drug formulation process allowing granulation of moisture sensitive drugs. However, due to the lack of experience and in-depth process understanding, this technique is not yet widely used. During the TSHMG process, the microstructure of the granules is generated and modified and strongly depends on the flow behavior of the material. Hence, rheology might be a suitable tool to simulate and examine this process. However, chemical interactions of the material are influencing the physical properties leading to the microstructure. In this research project it is spectroscopically investigated whether the heat applied in a rheometer induces the same molecular effects as these occurring during TSHMG of the model formulation caffeine anhydrous/Soluplus®. Hence, it is evaluated whether rheology can be used as a simulation tool to improve the understanding of the material behavior at molecular level during continuous melt granulation. Therefore, in-line Raman spectroscopy is executed during TSHMG and in situ Fourier Transform Infra-red (FTIR) during oscillatory rheological experiments. The results from the in-line Raman monitoring revealed polymorph transition of caffeine anhydrous during twin screw melt granulation with Soluplus® which is stimulated depending on the binder concentration and/or granulation temperature. A correlation was seen between the FTIR spectra obtained during the rheological temperature ramp and the in-line collected Raman spectra during the melt granulation runs. The polymorphic conversion of caffeine anhydrous could be detected in the same temperature range with both techniques, proving the comparability of plate-plate rheometry and hot melt granulation (HMG) for this case with the used parameter settings. Process simulation using rheology combined with in situ FTIR seems a promising approach to increase process understanding and to facilitate binder and parameter selection for TSHMG.

The importance of binder moisture content in Metformin HCL high-dose formulations prepared by moist aqueous granulation (MAG)

The aim of this study was to evaluate binders to improve the flowability of granulates and compactibility of Metformin HCL (Met) using the moist aqueous granulation (MAG) process. The effect of the binder moisture content on granulate and tablet quality was also evaluated. Vinylpyrrolidone-vinyl acetate copolymer (Kollidon VA64 fine: VA64), polyvidone (Povidone K12: PVP), hydroxypropyl cellulose (HPC SSL SF: HPC) and hydroxypropyl methylcellulose (Methocel E5 LV: HPMC) were evaluated as binders. These granulates, except for HPMC, had a lower yield pressure than Met active pharmaceutical ingredient (API). HPMC Met was not sufficiently granulated with low water volume. No problems were observed with the VA64 Met granulates during the tableting process. However, HPC Met granulates had a bowl-forming tendency, and PVP Met granulates had the tendency to stick during the tableting process. These bowl-forming and sticking tendencies may have been due to the low moisture absorbency of HPC and the high volume of bound water of PVP, respectively. VA64 Met granulates had the highest ambient moisture content (bulk water, bound water) and moisture absorbency. It was concluded that the type of binder used for the Met MAG process has an impact on granulate flow and compactibility, as well as moisture absorbency and maintenance of moisture balance.

Continuous twin screw melt granulation of glyceryl behenate: Development of controlled release tramadol hydrochloride tablets for improved safety

Interest in granulation processes using twin screw extrusion machines is rapidly growing. The primary objectives of this study were to develop a continuous granulation process for direct production of granules using this technique with glyceryl behenate as a binder, evaluate the properties of the resulting granules and develop controlled release tablets containing tramadol HCl. In addition, the granulation mechanism was probed and the polymorphic form of the lipid and drug release rate were evaluated on stability. Granules were prepared using a Leistritz NANO16 twin screw extruder operated without a constricting die. The solid state of the granules were characterized by differential scanning calorimetry and X-ray diffraction. Formulated tablets were studied in 0.1N HCl containing 0-40% ethanol to investigate propensity for alcohol induced dose dumping. The extrusion barrel temperature profile and feed rate were determined to be the primary factors influencing the particle size distribution. Granules were formed by a combination immersion/distribution mechanism, did not require subsequent milling, and were observed to contain desirable polymorphic forms of glyceryl behenate. Drug release from tablets was complete and controlled over 16 h and the tablets were determined to be resistant to alcohol induced dose dumping. The drug release rate from the tablets was found to be stable at 40°C and 75% relative humidity for the duration of a 3 month study.

Granulation techniques and technologies: recent progresses

Granulation, the process of particle enlargement by agglomeration technique, is one of the most significant unit operations in the production of pharmaceutical dosage forms, mostly tablets and capsules. Granulation process transforms fine powders into free-flowing, dust-free granules that are easy to compress. Nevertheless, granulation poses numerous challenges due to high quality requirement of the formed granules in terms of content uniformity and physicochemical properties such as granule size, bulk density, porosity, hardness, moisture, compressibility, etc. together with physical and chemical stability of the drug. Granulation process can be divided into two types: wet granulation that utilize a liquid in the process and dry granulation that requires no liquid. The type of process selection requires thorough knowledge of physicochemical properties of the drug, excipients, required flow and release properties, to name a few. Among currently available technologies, spray drying, roller compaction, high shear mixing, and fluid bed granulation are worth of note. Like any other scientific field, pharmaceutical granulation technology also continues to change, and arrival of novel and innovative technologies are inevitable. This review focuses on the recent progress in the granulation techniques and technologies such as pneumatic dry granulation, reverse wet granulation, steam granulation, moisture-activated dry granulation, thermal adhesion granulation, freeze granulation, and foamed binder or foam granulation. This review gives an overview of these with a short description about each development along with its significance and limitations.

Effect of binders on the release rates of direct molded verapamil tablets using twin-screw extruder in melt granulation

Conventional manufacturing of pharmaceutical tablets often involves single processes such as blending, granulation, milling and direct compression. A process that minimizes and incorporates all these in a single continuous step is desirable. The concept of omitting milling step followed by direct-molding of tablets utilizing a twin-screw extruder in a melt granulation process using thermoplastic binders was explored. The objective of this study was to investigate the effect of combining hydrophilic binder (HPMC K4M, PEO 1M), and hydrophobic binder (Compritol® ATO 888, Precirol® ATO 5) on the release profiles of direct-molded tablets and direct-compressed tablets from milled extrudates using a quality-by-design approach. It was identified that hydrophilic binder type and process significantly affects (p=0.005) the release profiles of verapamil. Moreover, two-way interaction analysis demonstrated that the combination of process with type of hydrophilic polymer (p=0.028) and the type of hydrophilic polymer with polymer ratio (p=0.033) significantly affected the release profiles. The formulation release kinetics correlated to Higuchi release model and the mechanism correlated to a non-Fickian release mechanism. The results of the present study indicated that direct-molded tablets with different release profiles can be manufactured without milling process and through a continuous melt granulation using twin-screw extruder with appropriate thermoplastic binder ratio.

Hot-melt granulation in a twin screw extruder: effects of processing on formulations with caffeine and Ibuprofen

Hot-melt granulation (HMG) by twin screw extrusion is a novel technology for the continuous processing of pharmaceuticals but confidence must still be gained regarding whether the environment affects drug properties. In this preliminary study, granulation was studied for a model product containing lactose monohydrate and active ingredients of differing water solubility, namely ibuprofen versus caffeine. The formulations were granulated at 220 rpm and 100°C with polyethylene glycol binders of differing molecular weights and at concentrations between 6.5% and 20%. In terms of granule properties, the low melting point of ibuprofen had a dominant influence by producing larger, stronger granules, whereas the caffeine products were more comparable to a blank containing no active ingredient. Drug degradation was study by differential scanning calorimetry, X-ray diffraction, and high-pressure liquid chromatography. The only detected change was the dehydration of lactose monohydrate for the caffeine and blank products, whereas the lubricating influence of the ibuprofen protected its granules. The short residence time (∼60 s) was consider to be influential in minimizing damage of the drug despite the high temperature and shear attributed to HMG inside a twin screw extruder.