Electrospun Antibacterial Chitosan-Based Fibers

Nanofibers used for the delivery of analgesics

Nanofibers are extremely advantageous for drug delivery because of their high surface area-to-volume ratios, high porosities and 3D open porous structures. Local delivery of analgesics by using nanofibers allows site-specificity and requires a lower overall drug dosage with lower adverse side effects. Different analgesics have been loaded onto various nanofibers, including those that are natural, synthetic and copolymer, for various medical applications. Analgesics can also be singly or coaxially loaded onto nanofibers to enhance clinical applications. In particular, analgesic-eluting nanofibers provide additional benefits to preventing wound adhesion and scar formation. This paper reviews current research and breakthrough discoveries on the innovative application of analgesic-loaded nanofibers that will alter the clinical therapy of pain.

New antimicrobial chitosan derivatives for wound dressing applications

Chitosan is a non-toxic, biocompatible, biodegradable natural cationic polymer known for its low imunogenicity, antimicrobial, antioxidant effects and wound-healing activity. To improve its therapeutic potential, new chitosan-sulfonamide derivatives have been designed to develop new wound dressing biomaterials. The structural, morphological and physico-chemical properties of synthesized chitosan derivatives were analyzed by FT-IR, (1)H NMR spectroscopy, scanning electron microscopy, swelling ability and porosity. Antimicrobial, in vivo testing and biodegradation behavior have been also performed. The chitosan derivative membranes showed improved swelling and biodegradation rate, which are important characteristics required for the wound healing process. The antimicrobial assay evidenced that chitosan-based sulfadiazine, sulfadimethoxine and sulfamethoxazole derivatives were the most active. The MTT assay showed that some of chitosan derivatives are nontoxic. Furthermore, the in vivo study on burn wound model induced in Wistar rats demonstrated an improved healing effect and enhanced epithelialization of chitosan-sulfonamide derivatives compared to neat chitosan. The obtained results strongly recommend the use of some of the newly developed chitosan derivatives as antimicrobial wound dressing biomaterials.

High thermal stability and high tensile strength terpolyester nanofibers containing biobased monomer: fabrication and characterization

Novel nanofibers of a highly heat-resistive biobased terpolyester of isosorbide (ISB), ethylene glycol, 1,4-cyclohexane dimethanol and terephthalic acid (PEICT) were fabricated using electrospinning and their properties were characterized.

Coordination-driven multilayer of phosvitin-polyphenol functional nanofibrous membranes: antioxidant and biomineralization applications for tissue engineering

The layer-by-layer (LBL) deposition technique has been widely used to decorate the nanofibers formed from polymer pairs with complementary functional groups.

POSS–PU electrospinning nanofibers membrane with enhanced blood compatibility

The addition of POSS results in (a) platelet adsorption amount of electrospun fibers membrane decreased (b) protein adsorption of electrospun fibers membrane decreased (c) the growth of bacteria was inhibited.

Nanomaterials for Functional Textiles and Fibers

Nanoparticles are very interesting because of their surface properties, different from bulk materials. Such properties make possible to endow ordinary products with new functionalities. Their relatively low cost with respect to other nano-additives make them a promising choice for industrial mass-production systems. Nanoparticles of different kind of materials such as silver, titania, and zinc oxide have been used in the functionalization of fibers and fabrics achieving significantly improved products with new macroscopic properties. This article reviews the most relevant approaches for incorporating such nanoparticles into synthetic fibers used traditionally in the textile industry allowing to give a solution to traditional problems for textiles such as the microorganism growth onto fibers, flammability, robustness against ultraviolet radiation, and many others. In addition, the incorporation of such nanoparticles into special ultrathin fibers is also analyzed. In this field, electrospinning is a very promising technique that allows the fabrication of ultrathin fiber mats with an extraordinary control of their structure and properties, being an ideal alternative for applications such as wound healing or even functional membranes.

Gold nanorods contained polyvinyl alcohol/chitosan nanofiber matrix for cell imaging and drug delivery

Gold nanorods (AuNRs) that contained polyvinyl alcohol/chitosan (PVA/CS) hybrid nanofibers with dual functions are successfully fabricated by a simple electrospinning method. The results of transmission electron microscopy (TEM), X-ray diffraction (XRD) and energy dispersive X-ray (EDX) spectroscopy indicate that AuNRs are indeed encapsulated into the PVA/CS hybrid nanofibers. FTIR spectra results demonstrate that the chemical structures of PVA and CS are not affected when the AuNRs are introduced into the fibers. In vitro cytotoxicity test reveals that the hybrid fibers involving AuNRs are completely biocompatible. The as-prepared fibers can be used as a carrier for anticancer agent doxorubicin (DOX), and the drug is delivered into the cell nucleus. The AuNRs and DOX incorporated fibers are effective for inhibiting the growth and proliferation of ovary cancer cells and they can also be used as the cell imaging agent due to the unique optical properties of AuNRs. The nanofiber matrix combining two functions of cell imaging and drug delivery may be of great application potential in biomedical-related areas.

Electrosprayed nanoparticles and electrospun nanofibers based on natural materials: applications in tissue regeneration, drug delivery and pharmaceuticals

Nanotechnology refers to the fabrication, characterization, and application of substances in nanometer scale dimensions for various ends. The influence of nanotechnology on the healthcare industry is substantial, particularly in the areas of disease diagnosis and treatment. Recent investigations in nanotechnology for drug delivery and tissue engineering have delivered high-impact contributions in translational research, with associated pharmaceutical products and applications. Over the past decade, the synthesis of nanofibers or nanoparticles via electrostatic spinning or spraying, respectively, has emerged as an important nanostructuring methodology. This is due to both the versatility of the electrospinning/electrospraying process and the ensuing control of nanofiber/nanoparticle surface parameters. Electrosprayed nanoparticles and electrospun nanofibers are both employed as natural or synthetic carriers for the delivery of entrapped drugs, growth factors, health supplements, vitamins, and so on. The role of nanofiber/nanoparticle carriers is substantiated by the programmed, tailored, or targeted release of their contents in the guise of tissue engineering scaffolds or medical devices for drug delivery. This review focuses on the nanoformulation of natural materials via the electrospraying or electrospinning of nanoparticles or nanofibers for tissue engineering or drug delivery/pharmaceutical purposes. Here, we classify the natural materials with respect to their animal/plant origin and macrocyclic, small molecule or herbal active constituents, and further categorize the materials according to their proteinaceous or saccharide nature.

A bilayer composite composed of TiO2-incorporated electrospun chitosan membrane and human extracellular matrix sheet as a wound dressing

We designed bilayer composites composed of an upper layer of titanium dioxide (TiO2)-incorporated chitosan membrane and a sub-layer of human adipose-derived extracellular matrix (ECM) sheet as a wound dressing for full-thickness wound healing. The dense and fibrous top layer, which aims to protect the wound from bacterial infection, was prepared by electrospinning of chitosan solution followed by immersion in TiO2 solution. The sponge-like sub-layer, which aims to promote new tissue regeneration, was prepared with acellular ECM derived from human adipose tissue. Using a modified drop plate method, there was a 33.9 and 69.6% reduction in viable Escherichia coli and Staphylococcus aureus on the bilayer composite, respectively. In an in vivo experiment using rats, the bilayer composites exhibited good biocompatibility and provided proper physicochemical and compositional cues at the wound site. Changes in wound size and histological examination of full-thickness wounds showed that the bilayer composites induced faster regeneration of granulation tissue and epidermis with less scar formation, than control wounds. Overall results suggest that the TiO2-incorporated chitosan/ECM bilayer composite can be a suitable candidate as a wound dressing, with an excellent inhibition of bacterial penetration and wound healing acceleration effects.

Fabrication of electrospun poly(D,L lactide-co-glycolide)80/20 scaffolds loaded with diclofenac sodium for tissue engineering

BACKGROUND

Adaptation of nanotechnology into materials science has also advanced tissue engineering research. Tissues are basically composed of nanoscale structures hence making nanofibrous materials closely resemble natural fibers. Adding a drug release function to such material may further advance their use in tissue repair.

METHODS

In the current study, bioabsorbable poly(D,L lactide-co-glycolide)80/20 (PDLGA80/20) was dissolved in a mixture of acetone/dimethylformamide. Twenty percent of diclofenac sodium was added to the solution. Nanofibers were manufactured using electrospinning. The morphology of the obtained scaffolds was analyzed by scanning electron microscopy (SEM). The release of the diclofenac sodium was assessed by UV/Vis spectroscopy. Mouse fibroblasts (MC3T3) were seeded on the scaffolds, and the cell attachment was evaluated with fluorescent microscopy.

RESULTS

The thickness of electrospun nanomats was about 1 mm. SEM analysis showed that polymeric nanofibers containing drug particles formed very interconnected porous nanostructures. The average diameter of the nanofibers was 500 nm. Drug release was measured by means of UV/Vis spectroscopy. After a high start peak, the release rate decreased considerably during 11 days and lasted about 60 days. During the evaluation of the release kinetics, a material degradation process was observed. MC3T3 cells attached to the diclofenac sodium-loaded scaffold.

CONCLUSIONS

The nanofibrous porous structure made of PDLGA polymer loaded with diclofenac sodium is feasible to develop, and it may help to improve biomaterial properties for controlled tissue repair and regeneration.

Effects of electrospun chitosan wrapping for dry-ageing of beef, as studied by microbiological, physicochemical and low-field nuclear magnetic resonance analysis

The effects of using electrospun chitosan fibres as a wrapping material for dry-ageing beef was studied and compared to traditional dry-ageing and wet-ageing of beef for up to 21 days. The chitosan treatment showed improved results in terms of yield, reduction of microbial counts, yeasts and moulds, and lighter appearance compared to traditional dry-ageing. Weight and trimming losses were minimal in the wet-ageing beef. However, significant growth of lactic acid bacteria was observed in this group. Transverse relaxation times indicated a lower degree of muscle denaturation during ageing in the chitosan dry-ageing beef compared to the traditional dry-ageing meat. A principal component analysis furthermore indicated that 60.6% of the variation between samples and ageing treatments could be described by differences in the water content and distribution in the muscle. The study showed that electrospun chitosan fibre mats have potential as a wrapping material for improved quality during dry-ageing of beef.

Photo-polymerisable electrospun fibres of N-methacrylate glycol chitosan for biomedical applications

Nanofibrous mats of MGC were produced and photo-crosslinked for controlling their degradation and the release of an antibacterial drug.

Fibrous antibacterial coatings from self-assembled silver-binding elastins

A simple and green method to prepare silver coatings from self-assembled elastins with excellent antibacterial properties.

Novel antibacterial electrospun materials based on polyelectrolyte complexes of a quaternized chitosan derivative

Novel antibacterial materials based on polyelectrolyte complexes of quaternized chitosan (TMCh) and poly(2-acrylamido-2-methylpropanesulfonic acid) or poly(acrylic acid) (PAA) were prepared by electrospinning. AgNPs were loaded in TMCh/PAA fibers.

Curcumin-loaded poly(l-lactide-co-D,l-lactide) electrospun fibers: Preparation and antioxidant, anticoagulant, and antibacterial properties

Fibrous materials of poly(l-lactide- co-d,l-lactide), poly(l-lactide- co-d,l-lactide)/poly(ethylene glycol), and curcumin were prepared by electrospinning. The incorporation of poly(ethylene glycol) in the fibers caused a decrease in the mean fiber diameters down to 700 nm and in the water contact angle value, the latter being equal to 0 at poly(l-lactide- co-d,l-lactide)/poly(ethylene glycol) 60/40 weight ratio. The water contact angle values of poly(l-lactide- co-d,l-lactide)/curcumin fibrous materials considerably exceeded those of films of the same composition (approximately 120° as compared to approximately 95°, for electrospun mats and solution-cast films, respectively). Curcumin affected the thermal stability of the fibrous materials and the crystallinity degree of the polymers. The mechanical properties of the electrospun materials also depended on the composition of the polymer matrix and the amount of curcumin therein. In the curcumin-containing fibers, curcumin was found in the amorphous state, while higher antioxidant activity was exhibited by poly(l-lactide- co-d,l-lactide)/poly(ethylene glycol)/curcumin fibrous materials. In vitro determination of the activated partial thromboplastin time and prothrombin time showed that poly(l-lactide- co-d,l-lactide)/curcumin fibrous materials displayed anticoagulant activity. Antibacterial effect toward Staphylococcus aureus was manifested by the curcumin-containing mats.

Antibacterial wound dressing from chitosan/polyethylene oxide nanofibers mats embedded with silver nanoparticles

Novel antibacterial nanomaterials have been developed for biomedical applications. The present study involves the preparation and properties of antibacterial nanofibers from chitosan/polyethylene oxide electrospun nanofibers incorporated with silver nanoparticles. Silver nanoparticles were efficiently synthesized in situ after ultra violet (UV) with AgNO3 as precursor and chitosan/polyethylene oxide as reducing agent and protecting agent, respectively. Then the resultant solutions were electrospun into nanofibers. The formation of silver nanoparticles was confirmed with ultraviolet visible (UV-vis) and transmission electron microscopy (TEM), and the electrospun nanofibers were characterized by scanning electron microscopy and energy dispersive X-ray. The resultant fibers exhibited uniform morphology with silver nanoparticles distributed throughout the fiber. Also, the fibers showed certain tensile strength and excellent antibacterial activity against Gram-positive ( Staphylococcus aureus) and Gram-negative ( Escherichia coli) bacteria. Sustained release of silver nanoparticles from fibers could last for over 72 h. The silver-containing chitosan/polyethylene oxide nanofibers showed excellent cytocompatibility.

Antibacterial multilayer films fabricated by layer-by-layer immobilizing lysozyme and gold nanoparticles on nanofibers

Negatively charged gold nanoparticles (GNP) and positively charged lysozyme (Lys) were alternately deposited on negatively charged cellulose mats via layer-by-layer (LBL) self-assembly technique. The fabricated multilayer films were characterized by energy-dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectra (FT-IR), and wide-angle X-ray diffraction (XRD). Morphology of the LBL film coated mats was observed by scanning electron microscopy (SEM). Thermal degradation properties were investigated by differential scanning calorimetry (DSC) and thermo-gravimetric analysis (TGA). Additionally, the result of microbial inhibition assay indicated that the composite nanofibrous mats had excellent antibacterial activity against Escherichia coli and Staphylococcus aureus, which could be used for antimicrobial packing, tissue engineering, wound dressing, etc.