AIE luminogen labeled polymeric micelles for biological imaging and chemotherapy

In this study, an amphiphilic polymer FA-CS-DBA-CHO with aggregation-induced emission (AIE) feature was prepared by introducing 4-(diphenylamino)benzaldehyde derivative (DBA-CHO), imine bond and folic acid (FA) to the molecular structure of chitosan (CS). The amphiphilicity drove the polymer to self-assemble into micelles, and paclitaxel (PTX) could be solubilized in the hydrophobic core. Due to the excellent AIE effect, FA-CS-DBA-CHO exhibited strong cellular imaging capability. The pH-sensitive imine bond in the polymer allowed for accurate drug release in acidic environment. Both in vitro and in vivo studies demonstrated that the PTX-loaded FA-CS-DBA-CHO micelles could significantly inhibit the growth of tumor cells but without any notable toxicity. This micellar system was excellent carrier for bioimaging and chemotherapeutic drug delivery.

Tissue adhesives based on chitosan for skin wound healing: Where do we stand in this era? A review

Chitosan has been commonly used as an adhesive dressing material due to its excellent biocompatibility, degradability, and renewability. Tissue adhesives are outstanding among wound dressings because they can close the wound, absorb excess tissue exudate from the wound site, provide a moist environment, and act as a carrier for loading various bioactive molecules. They have been widely used in both preclinical and clinical treatment of skin wounds. This review summarizes recent research progresses in the application of chitosan and its derivatives for tissue adhesives. We also introduce their biomedical effects on wound adhesion, contamination isolation, antibacterial, immune regulation, and wound healing, and the strategies to achieve these functions when used as wound dressings. Finally, challenges and future perspectives of chitosan-based tissue adhesives are discussed for wound healing.

Multifunctional chitosan-based gel sponge with efficient antibacterial, hemostasis and strong adhesion

Developing wound dressings with solid adhesive properties that enable efficient, painless hemostasis and prevent wound infection remain a huge challenge. Herein, the tris(hydroxymethyl) methyl glycine-modified chitosan derivative (CTMG) was prepared and freeze-dried after simply adjusting the concentration of CTMG to obtain the chitosan-based gel sponge with desired multi-hollow structure, special antibacterial and biocompatibility. The adhesion strength on porcine skin was impressive up to 113 KPa, much higher than fibrin glue. It can withstand the pressure that far exceeds blood pressure. CTMG exhibits bacteriostatic abilities as demonstrated in a bacteriostatic assay, and alongside biocompatibility, as shown in cytotoxicity and hemolytic assays. Moreover, CTMG gel sponge showed hemostatic properties in both in vivo and in vitro hemostasis experiments. During an experiment on liver hemorrhage in rats, CTMG gel sponge proved to be more effective in controlling bleeding than other hemostatic sponges available on the market, indicating its promising hemostatic properties. CTMG gel sponge possesses the potential to function as a wound dressing and hemostatic material, making it suitable for various clinical applications.

Chitosan derivatives as dynamic coatings for transferrin glycoform separation in capillary electrophoresis

Chitosan and its derivatives are interesting biopolymers for different field of analytical chemistry, especially in separation techniques. The present study was aimed at testing chitosan water soluble derivatives as dynamic coating agents for application to capillary electrophoresis. In particular, chitosan was modified following three different chemical reactions (nucleophilic substitution, reductive amination, and condensation) to introduce differences in charge and steric hindrance, and to assess the effect of these physico-chemical properties in capillary electrophoresis. The effects were tested on the capillary electrophoretic separation of the glycoforms of human transferrin, an important iron-transporting serum protein, one of which, namely disialo-transferrin (CDT), is a biomarker of alcohol abuse. Chitosan derivatives were characterized by using NMR and 1H NMR, HP-SEC-TDA, DLS, and rheology. The use of these compounds as dynamic coatings in the electrolyte running buffer in capillary electrophoresis was tested assessing the peak resolution of the main glycoforms of human transferrin and particularly of disialo-transferrin. The results showed distinct changes of the peak resolution produced by the different derivatives. The best results in terms of peak resolution were achieved using polyethylene glycol (PEG)-modified chitosan, which, in comparison to a reference analytical approach, provided an almost baseline resolution of disialo-transferrin from the adjacent peaks.

Chitosan-glucose derivative as effective wall material for probiotic yeasts microencapsulation

A chitosan-glucose derivative (ChG) with lower antimicrobial activity against whey native probiotic yeast K. marxianus VM004 was synthesized by the Maillard reaction. The ChG derivative was characterized by FT-IR, 1H NMR, and SLS to determine the structure, deacetylation degree (DD), and molecular weight (Mw). In addition, we evaluated the antioxidant, cytotoxic, and antimicrobial activities of ChG. ChG was then used for microencapsulation of K. marxianus VM004 by spray drying. The microcapsules were characterized by evaluating their encapsulation yield, encapsulation efficiency, morphology, tolerance to the gastrointestinal tract, and viability during storage. The results indicated that a non-cytotoxic product with lower MW and DD and higher antioxidant activity than native chitosan was obtained by the Maillard reaction. The yeast ChG microcapsules exhibited an encapsulation efficiency >57 %, improved resistance to gastrointestinal conditions, and enhanced stability during storage. These results demonstrate that ChG may be a promising wall material for the microencapsulation of probiotic yeasts.

Synthesis of phytic acid-modified chitosan and the research of the corrosion inhibition and antibacterial properties

In this study, chitosan (CS) and phytic acid (PA) were employed as raw materials to synthesize a range of chitosan-phytic acid complexes (CP) with different ratios (CS:PA = 12:1, 9:1, 6:1, 3:1, 1:1). The structures and elemental compositions of the compounds were characterized using Fourier-Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS). The thermal stability of the synthesized materials was analyzed using a Thermogravimetric Analyzer (TG). Electrochemical testing was conducted to explore the corrosion inhibition effect of the modified inhibitors with varying ratios on Q235 steel in 3.5 wt% NaCl solution. Additionally, Scanning Electron Microscopy (SEM) was utilized to investigate the surface morphology of the immersed samples. When the CS:PA ratio was 3:1, CP exhibited an impressive corrosion inhibition efficiency of 94.9 %. Furthermore, the antimicrobial properties of CP were evaluated using the colony plate counting method. At a CS:PA ratio of 1:1, CP demonstrated the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) at 0.1250 % and 0.5000 %, respectively. This research introduces a novel green corrosion inhibitor capable of simultaneously reducing the electrochemical corrosion of Q235 while inhibiting biocorrosion, avoiding the antagonistic effects arising from the simultaneous use of biocides and corrosion inhibitors in the system.

Development of mussel-inspired chitosan-derived edible coating for fruit preservation

Fruit rotting at the postharvest stage severely limits their marketing supply chains and shelf-life. Thus, developing a green and cost-effective approach to extend the shelf-life of perishable foods is highly desired. In this study, inspired by the mussel-adhesion strategy, a multifunctional fruit coating material has been developed using a quaternized catechol-functionalized chitosan (CQ-CS) grafted with 2, 3-epoxypropyl trimethyl ammonium chloride and 3, 4-dihydroxy benzaldehyde. The as-prepared CQ-CS coating exhibited excellent mechanical properties, universal surface adhesion abilities, antimicrobial and antioxidant capacities without any potential toxicity effects. Using strawberry and banana as model fruits, we showed that the CQ-CS coating could effectively maintain the fruit's firmness and color, decrease the weight loss rate, and prevent microbial growth, thus finally extending their shelf- life when compared to uncoated samples, indicating the universal application of the as-prepared CQ-CS coating. These findings demonstrated that this novel conformal coating of CQ-CS has great potential for fruit preservation in the food industry.

An aminocaproic acid-grafted chitosan derivative with superior antibacterial and hemostatic properties for the prevention of secondary bleeding

Uncontrolled bleeding is one of the leading causes of human mortality. Existing hemostatic materials or techniques cannot meet the clinical requirements for safe and effective hemostasis. The development of novel hemostatic materials has always been of great interest. Chitosan hydrochloride (CSH), a derivative of chitin, is extensively used on wounds as an antibacterial and hemostatic agent. However, the formation of intra- or intermolecular hydrogen bonds between hydroxyl and amino groups limits its water solubility and dissolution rate and affects its effectiveness in promoting coagulation. Herein, we covalently grafted aminocaproic acid (AA) to the hydroxyl and amino groups of CSH via ester and amide bonds, respectively. The solubility of CSH in water (25 °C) was 11.39 ± 0.98 % (w/v), whereas the AA-grafted CSH (CSH-AA) reached 32.34 ± 1.23 % (w/v). Moreover, the dissolution rate of CSH-AA in water was 6.46 times higher than that of CSH. Subsequent studies proved that CSH-AA is non-toxic, biodegradable, and has superior antibacterial and hemostatic properties to CSH. Additionally, anti-plasmin activity can be exerted by the dissociated AA from the CSH-AA backbone, which can help to lessen secondary bleeding.

Synthesis, characterization, and biological evaluation of new chitosan derivative bearing diphenyl pyrazole moiety

This work reports the synthesis of a new pyrazole derivative by reacting 5-amino-1,3-diphenyl pyrazole with succinic anhydride and bearing the product chemically on the chitosan chains via amide linkage to achieve a new chitosan derivative (DPPS-CH). The prepared chitosan derivative was analyzed by IR, NMR, elemental analysis, XRD, TGA-DTG, and SEM. As compared with chitosan, DPPS-CH showed an amorphous and porous structure. Coats-Redfern results showed that the thermal activation energy for the first decomposition of DPPS-CH is 43.72 KJ mol^-1 lower than that required for chitosan (88.32 KJ mol^-1), indicating the accelerating effect of DPPS on the thermal decomposition of DPPS-CH. The DPPS-CH manifested a powerful wide spectrum antimicrobial potential against pathogenic gram-positive and gram-negative bacteria and Candida albicans at minute concentrations (MIC = 50 μg mL^-1) compared to chitosan (MIC = 100 μg mL^-1). The MTT assay proved the toxic properties of DPPS-CH against a cancer cell line (MCF-7) at a minute concentration (IC50 = 15.14 μg mL^-1) while affecting normal cells (WI-38) at seven times this concentration (IC50 = 107.8 μg mL^-1). According to the current findings, the chitosan derivative developed in this work appears to be a promising material for use in biological domains.

Evaluation of sulfonated oxidized chitosan antifungal activity against Fusarium graminearum

Chitosan biomaterials are widely used in the biological area because of their broad-spectrum antibacterial activity. However, chitosan cannot be dissolved in a neutral solution, limiting its application in various fields seriously. In this study, water-soluble sulfonated oxidized chitosan (SOCS) with antifungal activity were prepared by oxidization and sulfonation. Its structure was clearly confirmed by spectroscopy data (FTIR, 1H NMR, ¹³C NMR) and elemental analysis. SEM images of OCS and SOCS revealed that there was a little curly and an irregular sheet-like morphologies on them which was attributed to the oxidation and sulfonation on CS. Moreover, the FTIR and NMR indicated that -OH on the CS was oxidized into -COOH on the OCS and -SO₃H groups on the SOCS. The EDS results of OCS and SOCS confirmed the presence of the oxygen element in OCS and the S element in SOCS. All studies confirmed the OCS and SOCS were synthesized successfully. Furthermore, the inhibitory activity of SOCS biocomposites against plant pathogenic fungi, (Fusarium graminearum), was investigated. The results showed that the SOCS have significant inhibitory effects on the mycelial growth of F. graminearum. The EC₅₀ value of SOCS against F. graminearum is 79.46 μg/mL. The research results presented above indicated that SOCS can be used as a candidate material for the control of plant pathogenic fungi, and can broaden the application of chitosan materials in plant protection and sustainable agriculture.Research highlightsSOCS showed better solubility in deionized water.The antifungal effect of SOCS dissolved in acetic acid was higher than that of CS dissolved in acetic acid.SOCS dissolved in water can cause an inhibitory effect on F. graminearum at lower concentrations.

Chitosan-based composites reinforced with antibacterial flexible wood membrane for rapid hemostasis

Irregular hemorrhagic traumas always threaten the health of patients due to uncontrollable bleeding and wound infections. The traditional hemostatic materials show dissatisfactory hemostatic efficiency and antibacterial activity in solving these potential bleeding dangers. Herein, we proposed a kind of composites based on flexible wood membrane (FWM) loaded with chitosan/alginate derivative for accelerating rapid hemostasis and preventing infection. FWM was removed part of hemicellulose and lignin by using NaOH/Na₂SO₃ mixture to obtain excellent flexibility while retaining the original porous structure, followed by loading silver nanoparticles on the FWM surface to prepare AgNPs-FWM as an antibacterial bio-carrier. Then, AgNPs-FWM was coated with polyoxyethylene stearate-modified chitosan and multi-aldehyde sodium alginate to fabricate the composites of chitosan/alginate/AgNPs-FWM (CSA/AgNPs-FWM) using in-situ Schiff base reaction. Furthermore, in vitro and in vivo experiments showed that the CSA/AgNPs-FWM composites exhibited lower BCI value (2.6 ± 1.3 %), more rapid hemostasis (26 s) and lower blood loss (67.8 mg) than that of the traditional materials. The possible mechanism for the hemostasis process was not only the high blood absorption capacity, but also the synergistic interaction between hydrophobic alkane chains, amino groups, aldehydes, hydroxyl groups and blood cells. Moreover, CSA/AgNPs-FWM showed exceptional superiorities in mechanical properties and antibacterial activity, which endowed composites high potential in hemostasis application for irregular external wound.

Vanillin chitosan miscible hydrogel blends and their prospects for 3D printing biomedical applications

In the present study, chitosan (CS) reacted with vanillin through a Schiff base reaction forming the vanillin-CS (VACS) derivative. FTIR and ¹H NMR spectra confirmed the derivatization of CS, the enhanced swelling behavior was long-established while XRD measurement stated the semicrystalline nature of the VACS derivative. In a further step, blends between CS and VACS were prepared in ratios CS/VACS 90/10 up to 10/90 w/w and the formation of hydrogen bonds was noticed through FTIR and XRD measurements. Structural optimizations were performed within the framework of density functional theory and interaction energies E_int were calculated. Collectively, these results along with viscosity measurements and SEM images prove the miscibility of CS/VACS blends. In the optimum CS/VACS ratios, inks for 3D printing application were prepared in different concentrations (3%w/v, 4%w/v, 5%w/v, 6%w/v). The augmentation of the samples' viscosity values influenced by the polymeric concentration was assessed while their thereafter printing application was conducted.

Porous membranes of quaternized chitosan composited with strontium-based nanobioceramic for periodontal tissue regeneration

This report demonstrates the development of a degradable quaternary ammonium derivative of chitosan (QC) composited with strontium-containing nanoapatite (SA) for bioactivity. The material was made as porous membrane by solution casting and freeze drying, for guided tissue regeneration (GTR) applications. The micromorphology, tensile strength, suture pull-out strength, degradation (in vitro, in phosphate buffered saline), and cytocompatibility (using human periodontal ligament cells) were tested to investigate the effect of derivatization and SA addition. The porosity of the membranes increased with increasing SA content and so did the tensile strength and the degradation. The suture pull-out strength, however, showed a decrease. The cell culture evaluation endorsed biocompatibility. The composite with 1.5 mg SA per 1 mL QC was found to have optimal qualities for GTR applications.

Preparation of chitosan biguanidine/PANI-containing self-healing semi-conductive waterborne scaffolds for bone tissue engineering

Electrically conducting self-healing scaffolds are known as a new series of intelligent biomaterial for regulating Human Adipose Mesenchymal Stem Cells biological behaviors, especially their differentiation to bone cells. Herein, we developed a novel hydrophilic semi-conductive chitosan derivative (CP) and loaded it into the self-healing waterborne polyurethane structure, as a new osteogenic agent. The fabricated scaffolds exhibited excellent shape memory properties with shape fixity (> 97 %) and shape recovery ratio (> 98 %) with excellent self-healing value (> 93 %) at a temperature close to the body temperature. The results of MTT, cell attachment, alkaline phosphatase activity, and alizarin red staining analysis demonstrated that the CP-contained scaffolds promote proliferation of hADSCs and matrix mineralization. Also, by introducing the CP the gene expression level of COL-1, ALP, RUNX2, and OCN were significantly enhanced, in line with matrix mineralization. These multifunctional engineered constructs are promising biomaterials for repairing various bone defects.

O-Carboxymethyl chitosan-based pH-responsive amphiphilic chitosan derivatives: Characterization, aggregation behavior, and application

Chitosan has attracted much attention in drug delivery, however, carboxymethyl chitosan (CMC)-based self-aggregated nanocarriers are seldom reported. In this paper, two kinds of CMC-based pH-responsive amphiphilic chitosan derivatives, N-2-hydroxylpropyl-3-butyl ether-O-carboxymethyl chitosan (HBCC) and N-2-hydroxylpropyl-3-(2-ethylhexyl glycidyl ether)-O-carboxymethyl chitosan (H2ECC), have been synthesized by the homogeneous reaction. The molecular structures were characterized by FTIR, ¹H NMR and ¹³C NMR. The optimum reaction condition was obtained based on the data of ¹H NMR spectrum: reaction time of 4 h, reaction temperature of 80 °C and n_epoxyn_-NH2 of 3/1, respectively. The XRD patterns showed the crystallinity of HBCC and H2ECC decreased due to the introduction of hydrophobic segments. The thermostability of HBCC and H2ECC was improved for the formation of heat-resistant stereo-complexed structures. The intermolecular hydrophobic interaction hindered the intermolecular mobility by increasing glass transition temperature of ca. 10 °C. Both HBCC and H2ECC have very low critical aggregation concentrations (HBCC: 0.66-1.56 g/L, H2ECC: 0.57-1.07 g/L) and moderate aggregate particle size, which is advantageous for utilization as a drug carrier. The curcumin loaded HBCC and H2ECC aggregates showed nontoxicity, meanwhile, HBCC and H2ECC showed good antibacterial activity against Staphylococcus aureus and Escherichia coli. As a result of these two favorable properties, HBCC and H2ECC could be used as curcumin nanocarriers as well as antibacterial agents.

Preparation and characterization of a Schiff-based chitosan-fructose quaternary ammonium salt for medical applications

The aim of this study was to develop a new chitosan derivative and investigate its effects on fresh tissue healing in rats. A chitosan-fructose Schiff based quaternary ammonium salt (CS = Fru-DEAE) was synthesized for the first time and characterized using FT-IR and ¹HNMR, and the modification rate and the solution properties were studied. A rat wound model was established, and the experimental group was treated using 0.1 g of the chitosan derivative hydrogel. The wound healing rate, and the concentration of collagen III and proline in the wounds were assessed in the experimental group and compared with those of the control group at 7, 10, and 15 d. The CS = Fru-DEAE hydrogel demonstrated good performance and promoted the healing of infected wounds in rats. The hydrogel could accelerate the infiltration of inflammatory cells and increase the amount of type III collagen in the wound area, which likely contributed to its efficacy.

Thiolated chitosan-lauric acid as a new chitosan derivative: Synthesis, characterization and cytotoxicity

Chitosan as a biopolymer is an attractive vehicle for biomedical applications due to its unique characteristics. In order to improve chitosan's physicochemical features, chemical modification has been carried out to make it more suitable for such approaches. The aim of this study was to prepare and evaluate thiolated chitosan-lauric acid as a new chitosan derivative for biomedical use. Lauric acid was introduced to chitosan via stable amide bond between carboxylic acid group of fatty acid and the amine in the chitosan and thiolation was carried out using thioglycolic acid. Resulted polymers were characterized by FTIR, ¹H NMR and TGA. Moreover, cell viability assessment of new derivative was performed using MTT method. FTIR and ¹H NMR results showed that both substitution reactions were successfully completed. Furthermore, new synthesized polymer had no significant cytotoxicity against normal gingiva human cells (HGF1-PI 1).These findings confirm that this new derivative can be introduced as a suitable polymer for biomedical purposes such as mucosal drug delivery.

Polyelectrolyte nanocomplexes based on chitosan derivatives for wound healing application

Wound healing, when compromised, may be guided by biological cues such as Arg-Gly-Asp (RGD), a peptide known to induce cell adhesion and migration, eventually combined with adapted nanocarriers. Three different formulations were prepared and investigated in vitro for topical application. All formulations were based on carboxylated and trimethylated chitosan (CMTMC) displaying RGD. The polyelectrolyte nanocomplexes were prepared by mixing two oppositely charged polymers of CMTMC and chondroitin sulfate at different polymer ratios and subsequently characterized by dynamic light scattering and scanning electron microscopy. Hydrogels and foams with a high concentration of RGD-functionalized chitosan (3%) and hyaluronic acid (1.5%) that formed gel-embedded nanocomplexes were developed. In vitro assays showed absence of toxicity, ability to promote proliferation over 7 days and promotion of migration of human dermal fibroblasts treated with any of our formulations. These formulations were shown to be suitable for easy topical application and have the potential to accelerate wound healing.

Novel chitosan based nanoparticles as gene delivery systems to cancerous and noncancerous cells

The present study aimed to investigate in vitro DNA transfection efficiency of three novel chitosan derivatives: thiolated trimethyl chitosan (TMC-Cys), methylated 4-N,N dimethyl aminobenzyl N,O carboxymethyl chitosan(MABCC) and thiolated trimethyl aminobenzyl chitosan(MABC-Cys). After polymer synthesis and characterization, nanoparticles were prepared using these polymers and their size, zeta potential and DNA condensing ability were measured. After that, cytotoxicity and transfection efficiency of nanocomplexes were carried out in three different cells. The results showed that all polymers could condense DNA plasmid strongly from N/P 2 and nanocomplexes had eligible sizes and zeta potentials. Moreover, the nanocomplexes had negligible cytotoxicity and MABC-Cys was the most effective vehicle for gene delivery in HEK-293T cells. In the two other cell lines, SKOV-3 and MCF-7, TMC-Cys exhibited the highest transfection efficiency. This study indicated that chemical structure of these novel chitosan derivatives in the interaction with the cell type can lead to successful gene delivery.

Role of EDTA on the Pd(II) adsorption characteristics of chitosan cross-linked 3-amino-1,2,4-triazole-5-thiol derivative from synthetic electroless plating solutions

This article targets the efficacy of chitosan cross-linked 3-Amino-1,2,4-triazole-5-thiol derivative for the recovery of Pd from synthetic electroless plating solutions (ELP) whose solution chemistry complexity is brought forward with ethylenediaminetetraacetic acid (EDTA), ammonium hydroxide (NH₄OH), and surfactant (cetyl trimethyl ammonium bromide (CTAB)). Batch adsorption characteristics of the resin were investigated in the parametric range of 2-10 pH, 0.2-2 g L^-1 adsorbent dosage, 5-1080 min contact time, 50-300 mg L^-1 Pd concentration and 25-60 °C operating temperature. Equilibrium, kinetic and thermodynamic model fitness studies were also considered. Pd(II) adsorption characteristics were determined using NaOH, KOH and HCl solutions with variant eluent concentrations (0.1-2 N). The solution chemistry complexity has been evaluated to have profound impact in detrimentally influencing Pd sorption characteristics of the CH-AZ resin. The resin has been characterized to be highly effective for Pd removal from synthetic ELP solutions but with moderate efficacy towards the noble metal recovery and reuse.

Mathematical modelling of Pb2+, Cu2+, Ni2+, Zn2+, Cr6+ and Cd2+ ions adsorption from a synthetic acid mine drainage onto chitosan derivative in a packed bed column

Studies on the adsorption of toxic metal ions in batch mode using modified chitosan beads have been reported by several authors in literature; for large-scale operations, packed bed column studies are performed to generate data that are directly applicable in real wastewater treatment. In this work, the application potential of chitosan derivative for the uptake of Pb²⁺, Cu²⁺, Ni²⁺, Zn²⁺, Cr⁶⁺, and Cd²⁺ ions from aqueous solution in a packed bed adsorption column was investigated. On this note, the adsorbent was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and Scanning electron microscope (SEM); the effect of breakthrough parameters such as influent concentration, bed height, and feed flow rate was determined. The experimental data were fitted to mathematical column models, namely Bed Depth Service Time (BDST), Yoon-Nelson and Thomas model. The removal efficiency, breakthrough and exhaustion time increased with an increase in bed height but decreased with an increase in the flow rate and influent concentration. The mathematical models applied in this study were successful in describing experimental data. Desorption studies were performed with no loss in the mass of the beads, and the breakthrough and exhaustion time were found to be the same on reusing the beads. Abbreviations: Ch-b: chitosan coated bentonite; GXXB: grafted cross-linked chitosan beads; MMBB: multi metal binding biosorbent; PFOLG: panosized ferric oxide loaded glycidyl; MPSD: Marquardt's percent standard deviation.

Efficacy of chitosan derivative films versus hydrocolloid dressing on superficial wounds

Objectives

Chitosan, the N-deacetylated derivative of chitin, has useful biological properties that promote haemostasis, analgesia, wound healing, and scar reduction; chitosan is bacteriostatic, biocompatible, and biodegradable. This study determined the efficacy of chitosan derivative film as a superficial wound dressing.

Methods

This multicentre randomised controlled trial included 244 patients, of whom 86 were treated with chitosan derivative film and 84 with hydrocolloid. The percentage of epithelisation, as well as patient comfort, clinical signs, and patient convenience in application and removal of the dressings were assessed.

Results

The primary outcome of this study was the percentage of epithelisation. Except for race (p = 0.04), there were no significant differences between groups in sex, age, antibiotic usage, or initial wound size (p > 0.05). There was no significant difference in the mean epithelisation percentage between groups (p = 0.29). Patients using chitosan derivative film experienced more pain during removal of dressing than those in the hydrocolloid group (p = 0.007). The chitosan derivative film group showed less exudate (p = 0.036) and less odour (p = 0.024) than the control group. Furthermore, there were no significant differences between groups in terms of adherence, ease of removal, wound drainage, erythema, itchiness, pain, and tenderness. No oedema or localised warmth was observed during the study.

Conclusion

This study concluded that chitosan derivative film is equivalent to hydrocolloid dressing and can be an option in the management of superficial and abrasion wounds.

Clinical trial No

NMRR-11-948-10565.

Rapid in situ cross-linking of hydrogel adhesives based on thiol-grafted bio-inspired catechol-conjugated chitosan

In this paper, a novel chitosan derivative, thiol-grafting bio-inspired catechol-conjugated chitosan was synthesized. The chemical structure of the synthesized catechol-conjugated chitosan was verified by ¹H NMR, and its contents of thiol group and catechol group were determined by UV-vis spectrum. Four percent of catechol-conjugated chitosan aqueous solution could form hydrogels rapidly in situ in 1 min or less with the addition of sodium periodate. Rheological studies showed that the mechanical properties depend on the concentrations of catechol-conjugated chitosan and the molar ratio of sodium periodate to catechol groups. Additionally, the adhesive properties of the resulting adhesives were evaluated, and the adhesion strength of obtained adhesives was as high as 50 kPa because of the complex and multiple interactions, especially the anti-oxidation mechanism of thiol group. The in vitro cytotoxicity assays demonstrated an excellent biocompatibility of the catechol-conjugated chitosan hydrogels. Benefiting from the in situ fast cured, desired mechanical strength, biocompatibility and relatively high adhesion performance, these properties suggested that catechol-conjugated chitosan hydrogel adhesives have potential applications as tissue adhesive for soft tissues.

Anti-Helicobacterpylori effectiveness and targeted delivery performance of amoxicillin-UCCs-2/TPP nanoparticles based on ureido-modified chitosan derivative

The amoxicillin-UCCs-2/TPP nanoparticles constructed with ureido-modified chitosan derivative UCCs-2 and sodium tripolyphosphate (TPP) played an important role to deliver drug to achieve more efficacious and specific eradication of Helicobacterpylori (H. pylori) in vitro. In this study, the anti-H. pylori effectiveness in vivo and uptake mechanism was investigated in details, including the effect of temperature, pH values and the addition of competitive substrate urea on uptake. Compared with unmodified nanoparticles, a more efficacious and specific anti-H. pylori activities were obtained in vivo by using this biological chitosan derivative UCCs-2. Histological staining and immunological analysis verified that the amoxicillin-UCCs-2/TPP nanoparticles could diminish the proinflammatory cytokines levels and alleviate the inflammatory damages caused by H. pylori infection. The uredio-modified nanoparticles also have favorable gastric retention property, which is beneficial for the oral drug delivery to targeted eradicate H. pylori infection in stomach. These findings suggest that this targeted drug delivery system may serve for specific treatment of H. pylori infection both in vitro and in vivo, which can also be used as promising nanocarriers for other therapeutic reagents to target H. pylori.

Preparation, characterization, and evaluation of 3,6-O-N-acetylethylenediamine modified chitosan as potential antimicrobial wound dressing material

This work aims to prepare 3,6-O-N-acetylethylenediamine modified chitosan (AEDMCS) and evaluate its potential use as an antimicrobial wound dressing material. UV, FTIR, and ¹H NMR results demonstrated N-acetylethylenediamine groups were successfully grafted to C3OH and C6OH on polysaccharide skeletons. TGA, XRD, and solubility tests indicated that as compared with chitosan, AEDMCS had diminished thermostability, decreased crystallinity, and greatly improved solubility. AEDMCS, with degrees of deacetylation and substitution being respectively 90.3% and 0.72, exhibited higher antibacterial activity than chitosan against six bacteria generally causing wound infections. Meanwhile, AEDMCS had permissible hemolysis and cytotoxicity and low BSA adsorption even at a AEDMCS concentration of 25mg/mL. Acute toxicity tests showed AEDMCS was nontoxic. Moreover, the wound healing property was preliminarily evaluated, illustrating that AEDMCS enhanced wound healing rates as expected and had no significant differences as compared with chitosan. These results suggested AEDMCS might be a potential material used as antibacterial wound dressings.

Sorption of copper onto low molecular weight chitosan derivative from aqueous solution

In this study, sorption of copper onto low molecular weight chitosan derivative was studied. Experimental parameters such as pH of the solution (A), temperature (B), dose of the sorbent (C), and concentration of solution (D) were considered. The statistical results indicated that the dose of sorbent (C) and Cu (II) concentration (D) influenced removal efficiency at 5% significance level. Also, some interactions such as ABCD, ACD, ABC and AC affected the removal process. The sorbent was characterized with FTIR, SEM and TG/DSC. Freundlich isotherm model was the best isotherm model. The kinetic study results correlated well with the pseudo-second-order model. The thermodynamic studies revealed that the nature of copper sorption was spontaneous and endothermic. Strong affinity of the sorbent for copper (II) was revealed by the Isothermal Titration Calorimetry (ITC) technique.

New antimicrobial chitosan derivatives for wound dressing applications

Chitosan is a non-toxic, biocompatible, biodegradable natural cationic polymer known for its low imunogenicity, antimicrobial, antioxidant effects and wound-healing activity. To improve its therapeutic potential, new chitosan-sulfonamide derivatives have been designed to develop new wound dressing biomaterials. The structural, morphological and physico-chemical properties of synthesized chitosan derivatives were analyzed by FT-IR, (1)H NMR spectroscopy, scanning electron microscopy, swelling ability and porosity. Antimicrobial, in vivo testing and biodegradation behavior have been also performed. The chitosan derivative membranes showed improved swelling and biodegradation rate, which are important characteristics required for the wound healing process. The antimicrobial assay evidenced that chitosan-based sulfadiazine, sulfadimethoxine and sulfamethoxazole derivatives were the most active. The MTT assay showed that some of chitosan derivatives are nontoxic. Furthermore, the in vivo study on burn wound model induced in Wistar rats demonstrated an improved healing effect and enhanced epithelialization of chitosan-sulfonamide derivatives compared to neat chitosan. The obtained results strongly recommend the use of some of the newly developed chitosan derivatives as antimicrobial wound dressing biomaterials.

Fast removal of uranium from aqueous solutions using tetraethylenepentamine modified magnetic chitosan resin

Chitosan was cross-linked using glutaraldehyde in the presence of magnetite. The resin was chemically modified through the reaction with tetraethylenepentamine (TEPA) to produce amine bearing chitosan. The resin showed a higher affinity towards the uptake of UO2(2+) ions from aqueous medium: maximum sorption capacity reached 1.8 mmol g(-1) at pH 4 and 25 °C. The nature of interaction of UO2(2+) ions with the resin was identified. Kinetics were carried out at different temperatures and thermodynamic parameters were evaluated. Breakthrough curves for the removal of UO2(2+) were studied at different flow rates, bed heights and after 3 regeneration cycles. Hydrochloric acid (0.5 M) was used for desorbing UO2(2+) from loaded resin: desorption yield as high as 98% was obtained.